Commit graph

932,869 commits

Author SHA1 Message Date
Vijaya Mohan Guvva
e20f469660 liquidio: synchronize VF representor names with NIC firmware
LiquidIO firmware supports a vswitch that needs to know the names of the
VF representors in the host to maintain compatibility for direct
programming using external Openflow agents.  So, for each VF representor,
send its name to the firmware when it gets registered and when its name
changes.

Signed-off-by: Vijaya Mohan Guvva <vijaya.guvva@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 17:04:06 +09:00
weiyi.lu@mediatek.com
e2f744a82d clk: mediatek: Add MT2712 clock support
Add MT2712 clock support, include topckgen, apmixedsys,
infracfg, pericfg, mcucfg and subsystem clocks.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
[sboyd@codeaurora.org: Static on top_clk_data]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 01:02:53 -07:00
Corentin Labbe
44a94c7ef9 arm64: dts: allwinner: H5: Restore EMAC changes
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.

This patch restore arm64 DT about dwmac-sun8i for H5
This reverts a part of commit 87e1f5e8bb ("arm64: dts: allwinner: Revert EMAC changes")

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02 09:02:14 +01:00
Corentin Labbe
4904337fe3 ARM: dts: sunxi: Restore EMAC changes (boards)
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.

This patch restore all boards DT about dwmac-sun8i
This reverts partially commit fe45174b72 ("arm: dts: sunxi: Revert EMAC changes")

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02 09:02:13 +01:00
Corentin Labbe
776245ae02 ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac
Since dwmac-sun8i could use either an integrated PHY or an external PHY
(which could be at same MDIO address), we need to represent this selection
by a MDIO switch.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02 09:02:12 +01:00
Corentin Labbe
4b236a0fe5 arm: dts: sunxi: h3/h5: Restore EMAC changes
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.

This patch restore sunxi-h3-h5.dtsi
This reverts partially commit fe45174b72 ("arm: dts: sunxi: Revert EMAC changes")

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02 09:02:12 +01:00
Corentin Labbe
079573e373 dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY
This patch add documentation about the MDIO switch used on sun8i-h3-emac
for integrated PHY.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02 09:02:00 +01:00
David S. Miller
74b200d566 Merge branch 'BPF-range-marking-improvements-for-meta-data'
Daniel Borkmann says:

====================
BPF range marking improvements for meta data

The set contains improvements for direct packet access range
markings related to data_meta pointer and test cases for all
such access patterns that the verifier matches on.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 17:01:39 +09:00
Daniel Borkmann
634eab11bd bpf: add test cases to bpf selftests to cover all meta tests
Lets also add test cases to cover all possible data_meta access tests
for good/bad access cases so we keep tracking them.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 17:01:39 +09:00
Daniel Borkmann
5beca081be bpf: also improve pattern matches for meta access
Follow-up to 0fd4759c55 ("bpf: fix pattern matches for direct
packet access") to cover also the remaining data_meta/data matches
in the verifier. The matches are also refactored a bit to simplify
handling of all the cases.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 17:01:38 +09:00
Daniel Borkmann
b06723da82 bpf: minor cleanups after merge
Two minor cleanups after Dave's recent merge in f8ddadc4db
("Merge git://git.kernel.org...") of net into net-next in
order to get the code in line with what was done originally
in the net tree: i) use max() instead of max_t() since both
ranges are u16, ii) don't split the direct access test cases
in the middle with bpf_exit test cases from 390ee7e29f
("bpf: enforce return code for cgroup-bpf programs").

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 17:01:38 +09:00
weiyi.lu@mediatek.com
b7f1a721bb clk: mediatek: Add dt-bindings for MT2712 clocks
Add MT2712 clock dt-bindings, include topckgen, apmixedsys,
infracfg, pericfg, mcucfg and subsystem clocks.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 00:57:25 -07:00
weiyi.lu@mediatek.com
eb522df40e dt-bindings: ARM: Mediatek: Document bindings for MT2712
This patch adds the binding documentation for apmixedsys, bdpsys,
imgsys, imgsys, infracfg, mcucfg, mfgcfg, mmsys, pericfg, topckgen,
vdecsys and vencsys for Mediatek MT2712.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 00:57:15 -07:00
David S. Miller
74784da82f Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains two one-liner fixes for your net tree,
they are:

1) Disable fast hash operations for 2-bytes length keys which is leading
   to incorrect lookups in nf_tables, from Anatole Denis.

2) Reload pointer ipv4 header after ip_route_me_harder() given this may
   result in use-after-free due to skbuff header reallocation, patch
   from Tejaswi Tanikella.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:52:41 +09:00
Jakub Kicinski
1495dc9f0a security: bpf: replace include of linux/bpf.h with forward declarations
Touching linux/bpf.h makes us rebuild a surprisingly large
portion of the kernel.  Remove the unnecessary dependency
from security.h, it only needs forward declarations.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:50:28 +09:00
Florian Fainelli
3ded76a8ff net: systemport: Only inspect valid switch port & queues
Hesoteric board configurations where port 0 is not available would still
make SYSTEMPORT inspect the switch port 0, queue 0, which, not being
enabled, would cause transmit timeouts over time. Just ignore those
unconfigured rings instead.

Fixes: 84ff33eeb23d ("net: systemport: Establish DSA network device queue mapping")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:49:28 +09:00
David S. Miller
9681ab0667 Merge branch 'nfp-bpf-rename-ALU_OP_NEG-and-support-BPF_NEG'
Jakub Kicinski says:

====================
nfp: bpf: rename ALU_OP_NEG and support BPF_NEG

Jiong says:

  Compilers are starting to use BPF_NEG, for example LLVM. However, NFP
does not support JITing it. This patch set adds this. Unit test is added
as well.

  Meanwhile, the current NFP_ALU_NEG is actually doing bitwise NOT (one's
complement) operation, so the name is misleading. This patch set corrects
this.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:47:30 +09:00
Jiong Wang
254ef4d746 nfp: bpf: support [BPF_ALU | BPF_ALU64] | BPF_NEG
This patch supports BPF_NEG under both BPF_ALU64 and BPF_ALU. LLVM recently
starts to generate it.

NOTE: BPF_NEG takes single operand which is an register and serve as both
input and output.

Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:47:30 +09:00
Jiong Wang
5d42ced195 nfp: bpf: rename ALU_OP_NEG to ALU_OP_NOT
The current ALU_OP_NEG is Op encoding 0x4 for NPF ALU instruction. It is
actually performing "~B" operation which is bitwise NOT.

The using naming ALU_OP_NEG is misleading as NEG is -B which is not the
same as ~B.

Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:47:30 +09:00
Adriana Reus
259bc28306 clk: imx: imx7d: Remove ARM_M0 clock
IMX7d does not have an M0 Core and this particular
clock doesn't seem connected to anything else.
Remove this entry from the CCM driver.

Signed-off-by: Adriana Reus <adriana.reus@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 00:26:18 -07:00
Adriana Reus
edc5a8e754 clk: imx: imx7d: Fix parent clock for OCRAM_CLK
The parent of OCRAM_CLK should be axi_main_root_clk
and not axi_post_div.

before:

    axi_src                     1       1       332307692       0 0
      axi_cg                    1       1       332307692       0 0
        axi_pre_div             1       1       332307692       0 0
          axi_post_div          1       1       332307692       0 0
            ocram_clk           0       0       332307692       0 0
            main_axi_root_clk   1       1       332307692       0 0

after:

    axi_src                     1       1       332307692       0 0
      axi_cg                    1       1       332307692       0 0
        axi_pre_div             1       1       332307692       0 0
          axi_post_div          1       1       332307692       0 0
            main_axi_root_clk   1       1       332307692       0 0
              ocram_clk         0       0       332307692       0 0

Reference Doc: i.MX 7D Reference Manual - Chap 5, p 516
(https://www.nxp.com/docs/en/reference-manual/IMX7DRM.pdf)

Fixes: 8f6d8094b2 ("ARM: imx: add imx7d clk tree support")
Signed-off-by: Adriana Reus <adriana.reus@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 00:26:14 -07:00
Philipp Zabel
7f218065c1 clk: imx: clk-imx6ul: allow lcdif_pre_sel to change parent rate
Allowing the lcdif_pre_sel to propagate rate changes to its parent PLL
allows more fine grained control over the LCDIF pixel clock rate.

For example, the Innovision AT043TN24 LCD panel described in the
imx6ul-14x14-evk device tree requires a 9 MHz pixel clock.
Before this patch, the lcdif_pre_sel clock rate is fixed, and just
setting the lcdif_pred and lcdif_podf dividers only allows to get as
close as about 8.44 MHz:

    pll3                                  1            1   480000000 0 0
       pll3_bypass                        1            1   480000000 0 0
	  pll3_usb_otg                    1            1   480000000 0 0
	     pll3_pfd1_540m               1            1   540000000 0 0
		lcdif_pre_sel             1            1   540000000 0 0
		   lcdif_pred             1            1    67500000 0 0
		      lcdif_podf           1            1     8437500 0 0
			 lcdif_pix           1            1     8437500 0 0

Once lcdif_pre_sel is allowed to propagate rate requests to its parent,
the actual pixel clock matches the requested value:

    pll3                                  1            1   480000000 0 0
       pll3_bypass                        1            1   480000000 0 0
	  pll3_usb_otg                    1            1   480000000 0 0
	     pll3_pfd1_540m               1            1   288000000 0 0
		lcdif_pre_sel             1            1   288000000 0 0
		   lcdif_pred             1            1    36000000 0 0
		      lcdif_podf           1            1     9000000 0 0
                         lcdif_pix           1            1     9000000 0 0

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 00:25:48 -07:00
Sébastien Szymanski
c68ee58d9e clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU
On i.MX6 SoCs without VPU (in my case MCIMX6D4AVT10AC), the hdmi driver
fails to probe:

[    2.540030] dwhdmi-imx 120000.hdmi: Unsupported HDMI controller
(0000:00:00)
[    2.548199] imx-drm display-subsystem: failed to bind 120000.hdmi
(ops dw_hdmi_imx_ops): -19
[    2.557403] imx-drm display-subsystem: master bind failed: -19

That's because hdmi_isfr's parent, video_27m, is not correctly ungated.
As explained in commit 5ccc248cc5 ("ARM: imx6q: clk: Add support for
mipi_core_cfg clock as a shared clock gate"), video_27m is gated by
CCM_CCGR3[CG8].

On i.MX6 SoCs with VPU, the hdmi is working thanks to the
CCM_CMEOR[mod_en_ov_vpu] bit which makes the video_27m ungated whatever
is in CCM_CCGR3[CG8]. The issue can be reproduced by setting
CCMEOR[mod_en_ov_vpu] to 0.

Make the HDMI work in every case by setting hdmi_isfr's parent to
mipi_core_cfg.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 00:25:34 -07:00
Jeff Barnhill
18129a2498 net: vrf: correct FRA_L3MDEV encode type
FRA_L3MDEV is defined as U8, but is being added as a U32 attribute. On
big endian architecture, this results in the l3mdev entry not being
added to the FIB rules.

Fixes: 1aa6c4f6b8 ("net: vrf: Add l3mdev rules on first device create")
Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:20:53 +09:00
Konstantin Khlebnikov
4eebff27ca tcp_nv: fix division by zero in tcpnv_acked()
Average RTT could become zero. This happened in real life at least twice.
This patch treats zero as 1us.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Lawrence Brakmo <Brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:16:27 +09:00
David S. Miller
07d3c4afc5 Merge branch 'dpaa-cleanups'
yuan linyu says:

====================
net: dpaa: two minor cleanup

original i try to remove duplicate code which clean allocated per-cpu area,
thanks to David S. Miller, there are two build warning as errors.
path 1: fix old code maybe-uninitialized warning.
path 2: remove duplicate code and fix unused var warning.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:15:26 +09:00
yuan linyu
d7bcde417b net: dpaa: remove init which already done in per-cpu allocation
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:15:25 +09:00
yuan linyu
a35c52b715 net: dpaa: fix maybe uninitialized var in dpaa_open()
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:15:25 +09:00
Jesper Dangaard Brouer
03c4cc385f bpf: cpumap micro-optimization in cpu_map_enqueue
Discovered that the compiler laid-out asm code in suboptimal way
when studying perf report during benchmarking of cpumap. Help
the compiler by the marking unlikely code paths.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:13:14 +09:00
David S. Miller
14e83bf829 Merge branch 'net-sched-block-callbacks-follow-up'
Jiri Pirko says:

====================
net: sched: block callbacks follow-up

This patchset does a bit of cleanup of leftovers after block callbacks
patchset. The main part is patch 2, which restores the original handling
of tc offload feature flag.

---
v1->v2:
- rebased on top of current net-next (bnxt changes)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:10:40 +09:00
Jiri Pirko
70b5aee467 net: sched: remove ndo_setup_tc check from tc_can_offload
Since tc_can_offload is always called from block callback or egdev
callback, no need to check if ndo_setup_tc exists.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:10:39 +09:00
Jiri Pirko
7612fb0387 net: sched: remove tc_can_offload check from egdev call
Since the only user, mlx5 driver does the check in
mlx5e_setup_tc_block_cb, no need to check here.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:10:39 +09:00
Jiri Pirko
44ae12a768 net: sched: move the can_offload check from binding phase to rule insertion phase
This restores the original behaviour before the block callbacks were
introduced. Allow the drivers to do binding of block always, no matter
if the NETIF_F_HW_TC feature is on or off. Move the check to the block
callback which is called for rule insertion.

Reported-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:10:39 +09:00
Jiri Pirko
0b5a89caee net: sched: remove unused tc_should_offload helper
tc_should_offload is no longer used, remove it.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 16:10:39 +09:00
Rajendra Nayak
7066fdd0d7 clk: qcom: clk-smd-rpm: add msm8996 rpmclks
Add all RPM controlled clocks on msm8996 platform

[srini: Fixed various issues with offsets and made names specific to msm8996]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 00:08:12 -07:00
Nikolay Aleksandrov
9289906313 net: bridge: add notifications for the bridge dev on vlan change
Currently the bridge device doesn't generate any notifications upon vlan
modifications on itself because it doesn't use the generic bridge
notifications.
With the recent changes we know if anything was modified in the vlan config
thus we can generate a notification when necessary for the bridge device
so add support to br_ifinfo_notify() similar to how other combined
functions are done - if port is present it takes precedence, otherwise
notify about the bridge. I've explicitly marked the locations where the
notification should be always for the port by setting bridge to NULL.
I've also taken the liberty to rearrange each modified function's local
variables in reverse xmas tree as well.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 15:53:40 +09:00
Colin Ian King
ad88d35a62 net: hns3: remove a couple of redundant assignments
The assignment to kinfo is redundant as this is a duplicate of
the initialiation of kinfo a few lines earlier, so it can be
removed.  The assignment to v_tc_info is never read, so this
variable is redundant and can be removed completely. Cleans
up two clang warnings:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c:433:34:
warning: Value stored to 'kinfo' during its initialization is never read
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c:775:3:
warning: Value stored to 'v_tc_info' is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 15:53:14 +09:00
Colin Ian King
a666960d18 liquidio: remove redundant setting of inst_processed to zero
The zero value assigned to inst_processed at the end of each
iteration of the do-while loop is overwritten on the next iteration
and hence it is a redundant assignment and can be removed. Cleans
up clang warning:

drivers/net/ethernet/cavium/liquidio/request_manager.c:480:3:
warning: Value stored to 'inst_processed' is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 15:52:46 +09:00
Luc Van Oostenryck
3b42c17a7e s390: pass endianness info to sparse
s390 is big-endian only but sparse assumes the same endianness
as the building machine.
This is problematic for code which expect __BYTE_ORDER__ being
correctly predefined by the compiler which sparse can then
pre-process differently from what gcc would, depending on the
building machine endianness.

Fix this by letting sparse know about the architecture endianness.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-02 07:52:25 +01:00
Colin Ian King
5618c8e24a net: dl2k: remove redundant re-assignment to np
The pointer np is initialized and then re-assigned the same value
a few lines later. Remove the redundant duplicated assignment. Cleans
up clang warning:

drivers/net/ethernet/dlink/dl2k.c:314:25: warning: Value stored to
'np' during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 15:52:19 +09:00
Linus Walleij
d4a69583de clk: qcom: Implement RPM clocks for MSM8660/APQ8060
The RPM clocks were missing for MSM8660/APQ8060. For this to be
completed we need to add a special fixed rate RPM clock that is used
for the PLL4 on these SoCs. The rest of the clocks are pretty
similar to the other supported platforms.

The "active" clock pattern is mirrored in all the clocks. I guess
that the PLL4 that clocks the LPASS is actually never used as
"active only" since the low-power audio subsystem should be left
on when the CPU goes to idle, so that it can be used as a stand-alone
MP3 player type of device.

The PLL4 seems to be enabled only on behalf of the booting LPASS
Hexagon - which will cast its own vote once its booted - and as
such we only configure the active state (meaning both states will
have same configuration). The result is that PLL4 will be on
from prepare() to unprepare() regardless of what the application
CPU does.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01 23:48:47 -07:00
Colin Ian King
3a1246fcbc wan: wanxl: remove redundant assignment to stat
stat set to zero and the value is never read, instead stat is
set again in the do-loop. Hence the setting to zero is redundant
and can be removed. Cleans up clang warning:

drivers/net/wan/wanxl.c:737:2: warning: Value stored to 'stat'
is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 15:48:16 +09:00
Linus Walleij
856e6bb91e clk: qcom: Update DT bindings for the MSM8660/APQ8060 RPMCC
These compatible strings need to be added to extend support
for the RPM CC to cover MSM8660/APQ8060. We also need to add
enumberators to the include file for a few clocks that were
missing.

Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01 23:47:27 -07:00
Linus Walleij
5e70ca8753 clk: qcom: Elaborate on "active" clocks in the RPM clock bindings
The concept of "active" clocks is just explained in a bried comment in the
device driver, let's explain it a bit more in the device tree bindings
so everyone understands this.

Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01 23:46:48 -07:00
Georgi Djakov
a49580ec9a clk: qcom: Remove unused RCG ops
The RCGs ops for shared branches are not used now, so remove it.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01 23:43:42 -07:00
Ludovic Desroches
92041a9ff0 clk: at91: utmi: set the mainck rate
By default, it is assumed that the UTMI clock is generated from a 12 MHz
reference clock (MAINCK). If it's not the case, the FREQ field of the
SFR_UTMICKTRIM has to be updated to generate the UTMI clock in the
proper way.

The UTMI clock has a fixed rate of 480 MHz. In fact, there is no
multiplier we can configure. The multiplier is managed internally,
depending on the reference clock frequency, to achieve the target of
480 MHz.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01 23:39:49 -07:00
Stephen Boyd
b87206f8ad clk: qcom: common: Migrate to devm_* APIs for resets and clk providers
Now that we have devm APIs for the reset controller and of clk hw
provider APIs we can remove the custom code here.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01 23:37:20 -07:00
Stephen Boyd
aa795c41d9 clk: Add devm_of_clk_add_hw_provider()/del_provider() APIs
Sometimes we only have one of_clk_del_provider() call in driver
error and remove paths, because we're missing a
devm_of_clk_add_hw_provider() API. Introduce the API so we can
convert drivers to use this and potentially reduce the amount of
code needed to remove providers in drivers.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01 23:37:19 -07:00
Bhumika Goyal
0777066dce clk: make clk_init_data const
Make these const as they are only stored in the init field of a clk_hw
structure, which is const.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01 23:25:51 -07:00
Bhumika Goyal
fa1da981f5 clk: imx: make clk_ops const
Make these const as they are only stored in the const field of a
clk_init_data structure.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01 23:25:49 -07:00