Commit graph

932,869 commits

Author SHA1 Message Date
Subash Abhinov Kasiviswanathan
2ffbbf0f91 net: qualcomm: rmnet: Fix the return value of rmnet_rx_handler()
Since packet is always consumed by rmnet_rx_handler(), we always
return RX_HANDLER_CONSUMED. There is no need to pass on this
value through multiple functions.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:10:23 +09:00
David S. Miller
8ab190fbe9 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2017-10-26

This series contains fixes to e1000, igb, ixgbe and i40e.

Vincenzo Maffione fixes a potential race condition which would result in
the interface being up but transmits are disabled in the hardware.

Colin Ian King fixes a possible NULL pointer dereference in e1000, which
was found by Coverity.

Jean-Philippe Brucker fixes a possible kernel panic when a driver cannot
map a transmit buffer, which is caused by an erroneous test.

Alex provides a fix for ixgbe, which is a partial revert of the commit
ffed21bcee ("ixgbe: Don't bother clearing buffer memory for descriptor rings")
because the previous commit messed up the exception handling path by
adding the count back in when we did not need to.  Also fixed a typo,
where the transmit ITR setting was being used to determine if we were
using adaptive receive interrupt moderation or not.  Lastly, fixed a
memory leak by including programming descriptors in the cleaned count.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:05:34 +09:00
Florian Fainelli
cc49c8ff68 MAINAINTERS: Add Doug as GENET maintainer
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:03:54 +09:00
David S. Miller
cf0e5c44f2 Merge branch 'bnxt_en-next'
Michael Chan says:

====================
bnxt_en: Updates for net-next.

This series includes firmware interface update, some optimizations,
some new PCI IDs, new MTU checks, ethtool reset method, interrupt coalescing
code cleanup, and TC flower offload for vxlan encap/decap from Sathya
Perla.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:46 +09:00
Sathya Perla
cd66358e52 bnxt_en: alloc tc_info{} struct only when tc flower is enabled
TC flower is not enabled on VFs and when there's no FW support.
Alloc the tc_info{} struct at init time only when TC flower is being
enabled.

Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:45 +09:00
Sathya Perla
5a84acbebb bnxt_en: query cfa flow stats periodically to compute 'lastused' attribute
This patch implements periodic querying of cfa flow stats
in batches to compute the 'lastused' attribute of TC flow stats.

Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:45 +09:00
Sathya Perla
f484f6782e bnxt_en: add hwrm FW cmds for cfa_encap_record and decap_filter
Add routines for issuing the hwrm_cfa_encap_record_alloc/free
and hwrm_cfa_decap_filter_alloc/free FW cmds needed for
supporting vxlan encap/decap offload.

Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:45 +09:00
Sathya Perla
8c95f773b4 bnxt_en: add support for Flower based vxlan encap/decap offload
This patch adds IPv4 vxlan encap/decap action support to TC-flower
offload.

For vxlan encap, the driver maintains a tunnel encap hash-table.
When a new flow with a tunnel encap action arrives, this table
is looked up; if an encap entry exists, it uses the already
programmed encap_record_handle as the tunnel_handle in the
hwrm_cfa_flow_alloc cmd. Else, a new encap node is added and the
L2 header fields are queried via a route lookup.
hwrm_cfa_encap_record_alloc cmd is used to create a new encap
record and the encap_record_handle is used as the tunnel_handle
while adding the flow.

For vxlan decap, the driver maintains a tunnel decap hash-table.
When a new flow with a tunnel decap action arrives, this table
is looked up; if a decap entry exists, it uses the already
programmed decap_filter_handle as the tunnel_handle in the
hwrm_cfa_flow_alloc cmd. Else, a new decap node is added and
a decap_filter_handle is alloc'd via the hwrm_cfa_decap_filter_alloc
cmd. This handle is used as the tunnel_handle while adding the flow.

The code to issue the HWRM FW cmds is introduced in a follow-up patch.

Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:45 +09:00
Michael Chan
f8503969d2 bnxt_en: Refactor and simplify coalescing code.
The mapping of the ethtool coalescing parameters to hardware parameters
is now done in bnxt_hwrm_set_coal_params().  The same function can
handle both RX and TX settings.  The code is now more clear.  Some
adjustments have been made to get better hardware settings.  The
coal_frames setting is now accurately set in hardware.  The max_timer
is set to coal_ticks value.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:45 +09:00
Michael Chan
18775aa8a9 bnxt_en: Reorganize the coalescing parameters.
The current IRQ coalescing logic is a little messy.  The ethtool
parameters are mapped to hardware parameters in a way that is difficult
to understand.  The first step is to better organize the parameters
by adding the new structure bnxt_coal.  The structure is used by both
the RX and TX sets of coalescing parameters.

Adjust the default coal_ticks to 14 us and 28 us for RX and TX.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:45 +09:00
Vasundhara Volam
49f7972fd1 bnxt_en: Add ethtool reset method
This is a firmware internal reset after driver is unloaded.

Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:45 +09:00
Michael Chan
7eb9bb3a0c bnxt_en: Check maximum supported MTU from firmware.
Some NICs have a firmware enforced maximum MTU setting by management
firmware.  Set up netdev->max_mtu accordingly.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:44 +09:00
Michael Chan
c1a7bdff17 bnxt_en: Optimize .ndo_set_mac_address() for VFs.
No need to call bnxt_approve_mac() which will send a message to the
PF if the MAC address hasn't changed.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:44 +09:00
Michael Chan
431aa1eb20 bnxt_en: Get firmware package version one time.
The current code retrieves the firmware package version from firmware
everytime ethtool -i is run.  There is no reason to do that as the
firmware will not change while the driver is loaded.  Get the version
once at init time.

Also, display the full 4-part firmware version string and remove the
less useful interface spec version.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:44 +09:00
Michael Chan
e0ad8fc598 bnxt_en: Check for zero length value in bnxt_get_nvram_item().
Return -EINVAL if the length is zero and not proceed to do essentially
nothing.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:44 +09:00
Rob Miller
618784e3ee bnxt_en: adding PCI ID for SMARTNIC VF support
Signed-off-by: Rob Miller <rmiller@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:44 +09:00
Ray Jui
8ed693b7bb bnxt_en: Add PCIe device ID for bcm58804
Add new PCIe device ID and chip number for bcm58804

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:44 +09:00
Michael Chan
57922b0a2f bnxt_en: Update firmware interface to 1.8.3.1
Vxlan encap/decap filters are added to this firmware spec.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:02:44 +09:00
David S. Miller
e324615b47 Merge branch 'dsa-define-port-types'
Vivien Didelot says:

====================
net: dsa: define port types

The DSA code currently has 3 bitmaps in the dsa_switch structure:
cpu_port_mask, dsa_port_mask and enabled_port_mask.

They are used to store the type of each switch port. This dates back
from when DSA didn't have a dsa_port structure to hold port-specific
data.

The dsa_switch structure is mainly used to communicate with DSA drivers
and must not contain such static data parsed from DTS or pdata, which
belongs the DSA core structures, such as dsa_switch_tree and dsa_port.

Also the enabled_port_mask is misleading, often misinterpreted as the
complement of disabled ports (thus including DSA and CPU ports), while
in fact it only masks the user ports.

A port can be of 3 types when it is not unused: "cpu" (interfacing with
a master device), "dsa" (interconnecting with another "dsa" port from
another switch chip), or "user" (user-facing port.)

This patchset first fixes the usage of DSA port type helpers, then
defines the DSA_PORT_TYPE_UNUSED, DSA_PORT_TYPE_CPU, DSA_PORT_TYPE_DSA,
and DSA_PORT_TYPE_USER port types, and finally removes the misleading
port bitmaps.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:00:10 +09:00
Vivien Didelot
5749f0f377 net: dsa: remove port masks
Now that DSA core provides port types, there is no need to keep this
information at the switch level. This is a static information that is
part of a DSA core dsa_port structure. Remove them.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:00:09 +09:00
Vivien Didelot
c38c5a6650 net: dsa: use new port type in helpers
Now that DSA exposes an enumerated type for the ports, we can use them
directly instead of checking bitmaps, which is more consistent.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:00:09 +09:00
Vivien Didelot
057cad2c59 net: dsa: define port types
Introduce an enumerated type for ports, which will be way more explicit
to identify a port type instead of digging into switch port masks.

A port can be of type CPU, DSA, user, or unused by default. This is a
static parsed information that cannot be changed at runtime.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:00:09 +09:00
Vivien Didelot
02bc6e546e net: dsa: introduce dsa_user_ports helper
Introduce a dsa_user_ports() helper to return the ds->enabled_port_mask
mask which is more explicit. This will also minimize diffs when touching
this internal mask.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:00:09 +09:00
Vivien Didelot
4a5b85ffe2 net: dsa: use dsa_is_user_port everywhere
Most of the DSA code still check ds->enabled_port_mask directly to
inspect a given port type instead of using the provided dsa_is_user_port
helper. Change this.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:00:09 +09:00
Vivien Didelot
2b3e9891cb net: dsa: rename dsa_is_normal_port helper
This patch renames dsa_is_normal_port to dsa_is_user_port because "user"
is the correct term in the DSA terminology, not "normal".

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:00:09 +09:00
Vivien Didelot
deb8ee0b51 net: dsa: fix dsa_is_normal_port helper
In order to know if a port is of type user, dsa_is_normal_port checks
that the given port is not of type DSA nor CPU. This is not enough
because a port can be unused.

Without the previous fix, this caused the unused mv88e6xxx ports to be
configured in normal mode.

The ds->enabled_port_mask reports the user ports, so check this instead.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:00:09 +09:00
Vivien Didelot
91dee14481 net: dsa: mv88e6xxx: skip unused ports
The unused ports are currently configured in normal mode. This does not
prevent the switch from being functional, but it is unnecessary. Skip
unused ports.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:00:09 +09:00
Vivien Didelot
bff7b688d5 net: dsa: add dsa_is_unused_port helper
As the comment above the chunk states, the b53 driver attempts to
disable the unused ports. But using ds->enabled_port_mask is misleading,
because this mask reports in fact the user ports.

To avoid confusion and fix this, this patch introduces an explicit
dsa_is_unused_port helper which ensures the corresponding bit is not
masked in any of the switch port masks.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28 00:00:09 +09:00
Roger Quadros
739c64414f mtd: nand: omap2: Fix subpage write
Since v4.12, NAND subpage writes were causing a NULL pointer
dereference on OMAP platforms (omap2-nand) using OMAP_ECC_BCH4_CODE_HW,
OMAP_ECC_BCH8_CODE_HW and OMAP_ECC_BCH16_CODE_HW.

This is because for those ECC modes, omap_calculate_ecc_bch()
generates ECC bytes for the entire (multi-sector) page and this can
overflow the ECC buffer provided by nand_write_subpage_hwecc()
as it expects ecc.calculate() to return ECC bytes for just one sector.

However, the root cause of the problem is present since v3.9
but was not seen then as NAND buffers were being allocated
as one big chunk prior to commit 3deb9979c7 ("mtd: nand: allocate
aligned buffers if NAND_OWN_BUFFERS is unset").

Fix the issue by providing a OMAP optimized write_subpage()
implementation.

Fixes: 62116e5171 ("mtd: nand: omap2: Support for hardware BCH error correction.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-10-27 16:53:23 +02:00
Gustavo A. R. Silva
5bca178eed net: faraday: ftmac100: Use BUG_ON instead of if condition followed by BUG.
Notice that in this particular case unlikely() is already being called
inside BUG_ON macro.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:53:14 +09:00
Gustavo A. R. Silva
4fa112f6b5 net: bcmgenet: Use BUG_ON instead of if condition followed by BUG
Use BUG_ON instead of if condition followed by BUG.

Something to notice in this particular case is that unlikely()
is already being called inside BUG_ON macro.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:52:36 +09:00
David S. Miller
42c8ae1137 Merge branch 'cxgb4-collect-more-hardware-dumps-via-ethtool'
Rahul Lakkireddy says:

====================
cxgb4: collect more hardware dumps via ethtool

This series of patches collect more firmware and hardware dumps
via ethool --get-dump facility.

Patch 1 collects hardware logic analyzer dumps.

Patch 2 collects CIM queue configuration dump.

Patch 3 collects RSS dumps.

Patch 4 collects TID info dump.

Patch 5 collects MPS-TCAM dump.

Patch 6 collects PBT tables dump.

Patch 7 collects hardware scheduler and pace table dumps.

Patch 8 collects miscellaneous hardware information, including
path mtu, PM stats, TP clock info, congestion control, and VPD
data dumps.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:48:30 +09:00
Rahul Lakkireddy
6f92a6544f cxgb4: collect hardware misc dumps
Collect path mtu, PM stats, TP clock info, congestion control, and VPD
data dumps.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:48:30 +09:00
Rahul Lakkireddy
08c4901bfe cxgb4: collect hardware scheduler dumps
Collect hardware TX traffic scheduler and pace tables.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:48:30 +09:00
Rahul Lakkireddy
db8cd7ce20 cxgb4: collect PBT tables dump
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:48:30 +09:00
Rahul Lakkireddy
b289593e13 cxgb4: collect MPS-TCAM dump
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:48:29 +09:00
Rahul Lakkireddy
9030e49897 cxgb4: collect TID info dump
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:48:29 +09:00
Rahul Lakkireddy
28b445561f cxgb4: collect RSS dumps
Collect RSS table and RSS VF configuration dumps.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:48:29 +09:00
Rahul Lakkireddy
3044d0fb01 cxgb4: collect CIM queue configuration dump
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:48:29 +09:00
Rahul Lakkireddy
27887bc7cb cxgb4: collect hardware LA dumps
Collect CIM, CIM_MA, ULP_RX, TP, CIM_PIF, and ULP_TX logic analyzer
dumps.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:48:29 +09:00
Hans de Goede
1f709713cb media: staging: media: atomisp: Fix oops by unbalanced clk enable/disable call
The common-clk core expects clk consumers to always call enable/disable
in a balanced manner. The atomisp driver does not call gmin_flisclk_ctrl()
in a balanced manner, so add a clock_on bool and skip redundant calls.

This fixes kernel oops like this one:

[   19.811613] gc0310_s_config S
[   19.811655] ------------[ cut here ]------------
[   19.811664] WARNING: CPU: 1 PID: 720 at drivers/clk/clk.c:594 clk_core_disabl
[   19.811666] Modules linked in: tpm_crb(+) snd_soc_sst_atom_hifi2_platform tpm
[   19.811744] CPU: 1 PID: 720 Comm: systemd-udevd Tainted: G         C OE   4.1
[   19.811746] Hardware name: Insyde T701/T701, BIOS BYT70A.YNCHENG.WIN.007 08/2
[   19.811749] task: ffff988df7ab2500 task.stack: ffffac1400474000
[   19.811752] RIP: 0010:clk_core_disable+0xc0/0x130
...
[   19.811775] Call Trace:
[   19.811783]  clk_core_disable_lock+0x1f/0x30
[   19.811788]  clk_disable+0x1f/0x30
[   19.811794]  gmin_flisclk_ctrl+0x87/0xf0
[   19.811801]  0xffffffffc0528512
[   19.811805]  0xffffffffc05295e2
[   19.811811]  ? acpi_device_wakeup_disable+0x50/0x60
[   19.811815]  ? acpi_dev_pm_attach+0x8e/0xd0
[   19.811818]  ? 0xffffffffc05294d0
[   19.811823]  i2c_device_probe+0x1cd/0x280
[   19.811828]  driver_probe_device+0x2ff/0x450

Fixes: "staging: atomisp: use clock framework for camera clocks"

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-27 16:47:53 +02:00
Xin Long
8aec4959d8 ip6_gre: update dst pmtu if dev mtu has been updated by toobig in __gre6_xmit
When receiving a Toobig icmpv6 packet, ip6gre_err would just set
tunnel dev's mtu, that's not enough. For skb_dst(skb)'s pmtu may
still be using the old value, it has no chance to be updated with
tunnel dev's mtu.

Jianlin found this issue by reducing route's mtu while running
netperf, the performance went to 0.

ip6ip6 and ip4ip6 tunnel can work well with this, as they lookup
the upper dst and update_pmtu it's pmtu or icmpv6_send a Toobig
to upper socket after setting tunnel dev's mtu.

We couldn't do that for ip6_gre, as gre's inner packet could be
any protocol, it's difficult to handle them (like lookup upper
dst) in a good way.

So this patch is to fix it by updating skb_dst(skb)'s pmtu when
dev->mtu < skb_dst(skb)'s pmtu in tx path. It's safe to do this
update there, as usually dev->mtu <= skb_dst(skb)'s pmtu and no
performance regression can be caused by this.

Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:45:42 +09:00
Xin Long
f8d20b46ce ip6_gre: only increase err_count for some certain type icmpv6 in ip6gre_err
The similar fix in patch 'ipip: only increase err_count for some
certain type icmp in ipip_err' is needed for ip6gre_err.

In Jianlin's case, udp netperf broke even when receiving a TooBig
icmpv6 packet.

Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:45:12 +09:00
Xin Long
f3594f0a7e ipip: only increase err_count for some certain type icmp in ipip_err
t->err_count is used to count the link failure on tunnel and an err
will be reported to user socket in tx path if t->err_count is not 0.
udp socket could even return EHOSTUNREACH to users.

Since commit fd58156e45 ("IPIP: Use ip-tunneling code.") removed
the 'switch check' for icmp type in ipip_err(), err_count would be
increased by the icmp packet with ICMP_EXC_FRAGTIME code. an link
failure would be reported out due to this.

In Jianlin's case, when receiving ICMP_EXC_FRAGTIME a icmp packet,
udp netperf failed with the err:
  send_data: data send error: No route to host (errno 113)

We expect this error reported from tunnel to socket when receiving
some certain type icmp, but not ICMP_EXC_FRAGTIME, ICMP_SR_FAILED
or ICMP_PARAMETERPROB ones.

This patch is to bring 'switch check' for icmp type back to ipip_err
so that it only reports link failure for the right type icmp, just as
in ipgre_err() and ipip6_err().

Fixes: fd58156e45 ("IPIP: Use ip-tunneling code.")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:43:31 +09:00
Jiri Olsa
9445464bb8 perf tools: Unwind properly location after REJECT
We have defined YY_USER_ACTION to keep trace of the column location
during events parsing, but we need to clean it up when we call REJECT.

When REJECT is called, the lexer shrinks the text and re-runs the
matching, so we need to address it in resuming the previous location
value to keep it correct for error display, like:

Before:
  $ perf stat -e 'cpu/uops_executed.core,krava/'  true
  event syntax error: '..38;5;9:mi=01;05;37;41:su=48;5;196;38;5;15:sg=48;5;1\
1;38;5;16:ca=48;5;196;38;5;226:tw=48;5;10;38;5;16:ow=48;5;10;38;5;21:st=48;5;\
21;38;50
�'
                                  \___ unknown term

After:
  $ ./perf stat -e 'cpu/uops_executed.core,krava/'  true
  event syntax error: '..cuted.core,krava/'
                                    \___ unknown term

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vug2hchlny30jfsfrumbym26@git.kernel.org
Link: http://lkml.kernel.org/r/20171009140944.GD28623@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-27 11:42:51 -03:00
Jose Abreu
6d9f0790af net: stmmac: First Queue must always be in DCB mode
According to DWMAC databook the first queue operating mode
must always be in DCB.

As MTL_QUEUE_DCB = 1, we need to always set the first queue
operating mode to DCB otherwise driver will think that queue
is in AVB mode (because MTL_QUEUE_AVB = 0).

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:32:56 +09:00
David S. Miller
123196b693 Merge branch 'dsa-lan9303-Learn-addresses-on-CPU-port-when-bridged'
Egil Hjelmeland says:

====================
net: dsa: lan9303: Learn addresses on CPU port when bridged

When CPU transmit directly to port using tag, the LAN9303 does not
learn MAC addresses received on the CPU port into the ALR table.
ALR learning is performed only when transmitting using ALR lookup.

Solution:
If the two external ports are bridged and the packet is not STP BPDU,
then use ALR lookup to allow ALR learning on CPU port.
Otherwise transmit directly to port with STP state override.

The first patch moves struct lan9303 to include/linux/dsa/lan9303.h in
order to prepare for the second patch.

Changes v1 -> v2:
 - new file: include/linux/dsa/lan9303.h instead of include/linux/lan9303.h
 - include linux/if_ether.h in include/linux/dsa/lan9303.h
 - renamed lan9303_tx_use_arl to lan9303_xmit_use_arl for consistency.
 - removed inline keyword to lan9303_xmit_use_arl
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:30:53 +09:00
Egil Hjelmeland
535f010d4b net: dsa: lan9303: Learn addresses on CPU port when bridged
When CPU transmit directly to port using tag, the LAN9303 does not
learn MAC addresses received on the CPU port into the ALR.
ALR learning is performed only when transmitting using ALR lookup.

Solution:
If the two external ports are bridged and the packet is not STP BPDU,
then use ALR lookup to allow ALR learning on CPU port.
Otherwise transmit directly to port with STP state override.

Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:30:53 +09:00
Egil Hjelmeland
356c3e9afa net: dsa: lan9303: Move struct lan9303 to include/linux/dsa/lan9303.h
The next patch require net/dsa/tag_lan9303.c to access struct lan9303.
Therefore move struct lan9303 definitions from drivers/net/dsa/lan9303.h
to new file include/linux/dsa/lan9303.h.

Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:30:53 +09:00
David S. Miller
eed05c85e2 Merge branch 'mlxsw-small-cleanup'
Jiri Pirko says:

====================
mlxsw: small cleanup

Couple of small cleanup patches from Nogah.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27 23:25:56 +09:00