Commit graph

932,869 commits

Author SHA1 Message Date
Michael J. Ruhl
b4d91aeb6e RDMA/netlink: OOPs in rdma_nl_rcv_msg() from misinterpreted flag
rdma_nl_rcv_msg() checks to see if it should use the .dump() callback
or the .doit() callback.  The check is done with this check:

if (flags & NLM_F_DUMP) ...

The NLM_F_DUMP flag is two bits (NLM_F_ROOT | NLM_F_MATCH).

When an RDMA_NL_LS message (response) is received, the bit used for
indicating an error is the same bit as NLM_F_ROOT.

NLM_F_ROOT == (0x100) == RDMA_NL_LS_F_ERR.

ibacm sends a response with the RDMA_NL_LS_F_ERR bit set if an error
occurs in the service.  The current code then misinterprets the
NLM_F_DUMP bit and trys to call the .dump() callback.

If the .dump() callback for the specified request is not available
(which is true for the RDMA_NL_LS messages) the following Oops occurs:

[ 4555.960256] BUG: unable to handle kernel NULL pointer dereference at
   (null)
[ 4555.969046] IP:           (null)
[ 4555.972664] PGD 10543f1067 P4D 10543f1067 PUD 1033f93067 PMD 0
[ 4555.979287] Oops: 0010 [#1] SMP
[ 4555.982809] Modules linked in: rpcrdma ib_isert iscsi_target_mod
target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_ucm
ib_uverbs ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod
dax sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd
glue_helper cryptd hfi1 rdmavt iTCO_wdt iTCO_vendor_support ib_core mei_me
lpc_ich pcspkr mei ioatdma sg shpchp i2c_i801 mfd_core wmi ipmi_si ipmi_devintf
ipmi_msghandler acpi_power_meter acpi_pad nfsd auth_rpcgss nfs_acl lockd grace
sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops ttm igb ahci crc32c_intel ptp libahci
pps_core drm dca libata i2c_algo_bit i2c_core
[ 4556.061190] CPU: 54 PID: 9841 Comm: ibacm Tainted: G          I
4.14.0-rc2+ #6
[ 4556.069667] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS
SE5C610.86B.01.01.0008.021120151325 02/11/2015
[ 4556.081339] task: ffff880855f42d00 task.stack: ffffc900246b4000
[ 4556.087967] RIP: 0010:          (null)
[ 4556.092166] RSP: 0018:ffffc900246b7bc8 EFLAGS: 00010246
[ 4556.098018] RAX: ffffffff81dbe9e0 RBX: ffff881058bb1000 RCX:
0000000000000000
[ 4556.105997] RDX: 0000000000001100 RSI: ffff881058bb1320 RDI:
ffff881056362000
[ 4556.113984] RBP: ffffc900246b7bf8 R08: 0000000000000ec0 R09:
0000000000001100
[ 4556.121971] R10: ffff8810573a5000 R11: 0000000000000000 R12:
ffff881056362000
[ 4556.129957] R13: 0000000000000ec0 R14: ffff881058bb1320 R15:
0000000000000ec0
[ 4556.137945] FS:  00007fe0ba5a38c0(0000) GS:ffff88105f080000(0000)
knlGS:0000000000000000
[ 4556.147000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4556.153433] CR2: 0000000000000000 CR3: 0000001056f5d003 CR4:
00000000001606e0
[ 4556.161419] Call Trace:
[ 4556.164167]  ? netlink_dump+0x12c/0x290
[ 4556.168468]  __netlink_dump_start+0x186/0x1f0
[ 4556.173357]  rdma_nl_rcv_msg+0x193/0x1b0 [ib_core]
[ 4556.178724]  rdma_nl_rcv+0xdc/0x130 [ib_core]
[ 4556.183604]  netlink_unicast+0x181/0x240
[ 4556.187998]  netlink_sendmsg+0x2c2/0x3b0
[ 4556.192392]  sock_sendmsg+0x38/0x50
[ 4556.196299]  SYSC_sendto+0x102/0x190
[ 4556.200308]  ? __audit_syscall_entry+0xaf/0x100
[ 4556.205387]  ? syscall_trace_enter+0x1d0/0x2b0
[ 4556.210366]  ? __audit_syscall_exit+0x209/0x290
[ 4556.215442]  SyS_sendto+0xe/0x10
[ 4556.219060]  do_syscall_64+0x67/0x1b0
[ 4556.223165]  entry_SYSCALL64_slow_path+0x25/0x25
[ 4556.228328] RIP: 0033:0x7fe0b9db2a63
[ 4556.232333] RSP: 002b:00007ffc55edc260 EFLAGS: 00000293 ORIG_RAX:
000000000000002c
[ 4556.240808] RAX: ffffffffffffffda RBX: 0000000000000010 RCX:
00007fe0b9db2a63
[ 4556.248796] RDX: 0000000000000010 RSI: 00007ffc55edc280 RDI:
000000000000000d
[ 4556.256782] RBP: 00007ffc55edc670 R08: 00007ffc55edc270 R09:
000000000000000c
[ 4556.265321] R10: 0000000000000000 R11: 0000000000000293 R12:
00007ffc55edc280
[ 4556.273846] R13: 000000000260b400 R14: 000000000000000d R15:
0000000000000001
[ 4556.282368] Code:  Bad RIP value.
[ 4556.286629] RIP:           (null) RSP: ffffc900246b7bc8
[ 4556.293013] CR2: 0000000000000000
[ 4556.297292] ---[ end trace 8d67abcfd10ec209 ]---
[ 4556.305465] Kernel panic - not syncing: Fatal exception
[ 4556.313786] Kernel Offset: disabled
[ 4556.321563] ---[ end Kernel panic - not syncing: Fatal exception
[ 4556.328960] ------------[ cut here ]------------

Special case RDMA_NL_LS response messages to call the appropriate
callback.

Additionally, make sure that the .dump() callback is not NULL
before calling it.

Fixes: 647c75ac59 ("RDMA/netlink: Convert LS to doit callback")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 14:54:43 -04:00
Michał Winiarski
9bdc3573a5 drm/i915/guc: Initialize GuC before restarting engines
Now that we're handling request resubmission the same way as regular
submission (from the tasklet), we can move GuC initialization earlier,
before restarting the engines. This way, we're no longer being in the
state of flux during engine restart - we're already in user requested
submission mode.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025172519.10670-5-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-25 19:41:04 +01:00
Parav Pandit
5a3dc32372 IB/cm: Fix memory corruption in handling CM request
In recent code, two path record entries are alwasy cleared while
allocated could be either one or two path record entries.
This leads to zero out of unallocated memory.

This fix initializes alternative path record only when alternative path
is set.

While we are at it, path record allocation doesn't check for OPA
alternative path, but rest of the code checks for OPA alternative path.
Path record allocation code doesn't check for OPA alternative LID.
This can further lead to memory corruption when only one path record is
allocated, but there is actually alternative OPA path record present in CM
request.

Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 9fdca4da4d ("IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 14:37:03 -04:00
Jens Axboe
4d740bc9f0 mq-deadline: add 'deadline' as a name alias
The scheduler framework now supports looking up the appropriate
scheduler with the {name,mq} tupple. We can register mq-deadline
with the alias of 'deadline', so that switching to 'deadline'
will do the right thing based on the type of driver attached to
it.

Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25 12:36:55 -06:00
Jens Axboe
8ac0d9a81e elevator: allow name aliases
Since we now lookup elevator types with the appropriate multiqueue
capability, allow schedulers to register with an alias alongside
the real name. This is in preparation for allowing 'mq-deadline'
to register an alias of 'deadline' as well.

Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25 12:36:50 -06:00
Jens Axboe
2527d99789 elevator: lookup mq vs non-mq elevators
If an IO scheduler is selected via elevator= and it doesn't match
the driver in question wrt blk-mq support, then we fail to boot.

The elevator= parameter is deprecated and only supported for
non-mq devices. Augment the elevator lookup API so that we
pass in if we're looking for an mq capable scheduler or not,
so that we only ever return a valid type for the queue in
question.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196695
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25 12:36:45 -06:00
Ilya Dryomov
d5ce4c31d6 block: cope with WRITE ZEROES failing in blkdev_issue_zeroout()
sd_config_write_same() ignores ->max_ws_blocks == 0 and resets it to
permit trying WRITE SAME on older SCSI devices, unless ->no_write_same
is set.  Because REQ_OP_WRITE_ZEROES is implemented in terms of WRITE
SAME, blkdev_issue_zeroout() may fail with -EREMOTEIO:

  $ fallocate -zn -l 1k /dev/sdg
  fallocate: fallocate failed: Remote I/O error
  $ fallocate -zn -l 1k /dev/sdg  # OK
  $ fallocate -zn -l 1k /dev/sdg  # OK

The following calls succeed because sd_done() sets ->no_write_same in
response to a sense that would become BLK_STS_TARGET/-EREMOTEIO, causing
__blkdev_issue_zeroout() to fall back to generating ZERO_PAGE bios.

This means blkdev_issue_zeroout() must cope with WRITE ZEROES failing
and fall back to manually zeroing, unless BLKDEV_ZERO_NOFALLBACK is
specified.  For BLKDEV_ZERO_NOFALLBACK case, return -EOPNOTSUPP if
sd_done() has just set ->no_write_same thus indicating lack of offload
support.

Fixes: c20cfc27a4 ("block: stop using blkdev_issue_write_same for zeroing")
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25 12:28:23 -06:00
Ilya Dryomov
425a4dba79 block: factor out __blkdev_issue_zero_pages()
blkdev_issue_zeroout() will use this in !BLKDEV_ZERO_NOFALLBACK case.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25 12:28:22 -06:00
Ilya Dryomov
bb749b31c2 block: move CAP_SYS_ADMIN check in blkdev_roset()
Check for CAP_SYS_ADMIN before calling into the driver, similar to
blkdev_flushbuf().  This is safer and can spare a check in the driver.

(Currently BLKROSET is overridden by md and rbd, rbd is missing the
check.  md has the check, but it covers a lot more than BLKROSET.)

Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25 12:25:00 -06:00
Maor Gottlieb
309fa3470f IB/mlx5: Add support for RSS on the inner packet
Some user space application would like to do RSS on the inner
packet fields instead on the outer.
When MLX5_RX_HASH_INNER is set with one or more of the other
hash fields, then the RSS will be done using the inner packet.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 14:19:32 -04:00
Maor Gottlieb
f95ef6cbae IB/mlx5: Add tunneling offloads support
The device can support receive Stateless Offloads for the inner
packet's fields only when the packet is processed by TIR which is
enabled to support tunneling. Otherwise, the device treats the
packet as an ordinary non-tunneling packet and receive offloads
can be done only for the outer packet's field.
In order to enable receive Stateless Offloading support for incoming
tunneling traffic the TIR should be created with tunneled_offload_en.
Tunneling offloads is supported only be raw ethernet QP.

This patch includes:
* New QP creation flag for tunneling offloads.
* Reports device capabilities.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 14:19:31 -04:00
Maor Gottlieb
4d350f1f89 IB/mlx5: Update tunnel offloads bits
This patch updates the mlx5_ifc with the following:
- Fix tunnel_stateless_gre typo.
- max_geneve_opt_len - Maximum geneve options length.
- tunnel_stateless_geneve_rx - If set, receive Stateless
  Offloads for Geneve tunneled (inner) packets are supported.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 14:17:06 -04:00
Guy Levi
7a0c8f4244 IB/mlx5: Support padded 128B CQE feature
In some benchmarks and some CPU architectures, writing the CQE on a full
cache line size improves performance by saving memory access operations
(read-modify-write) relative to partial cache line change. This patch
lets the user to configure the device to pad the CQE up to 128B in case
its content is less than 128B. Currently the driver supports only padding
for a CQE size of 128B.

Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 14:17:06 -04:00
Guy Levi
de57f2ad06 IB/mlx5: Support 128B CQE compression feature
In commit 1cbe6fc86c ("IB/mlx5: Add support for CQE compressing") the
concept of CQE compression was introduced and added a support for 64B
CQE size. This change update the code to support 128B CQE size as well.

Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 14:17:06 -04:00
Guy Levi
0ff8e79ca7 IB/mlx5: Add 128B CQE compression and padding HW bits
Adding new bits in mlx5_ifc_cmd_hca_cap to get the hardware capabilities
for:
 - compression_128: Support 128B CQE compression
 - cqe_128_always: Support 128B CQE padding

Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 14:17:06 -04:00
David Disseldorp
a2d9daad1d SMB: fix validate negotiate info uninitialised memory use
An undersize validate negotiate info server response causes the client
to use uninitialised memory for struct validate_negotiate_info_rsp
comparisons of Dialect, SecurityMode and/or Capabilities members.

Link: https://bugzilla.samba.org/show_bug.cgi?id=13092
Fixes: 7db0a6efdc ("SMB3: Work around mount failure when using SMB3 dialect to Macs")
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-10-25 13:04:25 -05:00
Noa Osherovich
ccc8708790 IB/mlx5: Allow creation of a multi-packet RQ
Allow creation of a multi-packet receive queue.

In order to create a multi-packet RQ, the following fields in
the mlx5_ib_rwq should be set:
- log_num_strides: Log of number of strides per WQE
- single_stride_log_num_of_bytes: Log of a single stride size
- two_byte_shift_en: When enabled, hardware pads 2 bytes of zeros
  before writing the message to memory (e.g. for the IP alignment).

Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 14:03:44 -04:00
Noa Osherovich
b4f34597a5 IB/mlx5: Expose multi-packet RQ capabilities
This patch reports the device's striding RQ capabilities to
the user-space:
- min/max_single_stride_log_num_of_bytes: Log of min/max number of
  bytes in a single stride.
- min/max_single_wqe_log_num_of_strides: Log of min/max number of
  strides in a single WQE.
- supported_qpts: A bit mask to know which QP types support multi-
  packet RQ, for now only Raw Packet QPs.

Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 14:03:44 -04:00
David Disseldorp
fe83bebc05 SMB: fix leak of validate negotiate info response buffer
Fixes: ff1c038add ("Check SMB3 dialects against downgrade attacks")
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-10-25 13:02:59 -05:00
Aurélien Aptel
db3b5474f4 CIFS: Fix NULL pointer deref on SMB2_tcon() failure
If SendReceive2() fails rsp is set to NULL but is dereferenced in the
error handling code.

Cc: stable@vger.kernel.org
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-10-25 12:58:54 -05:00
Aurelien Aptel
48923d2a9d CIFS: do not send invalid input buffer on QUERY_INFO requests
query_info() doesn't use the InputBuffer field of the QUERY_INFO
request, therefore according to [MS-SMB2] it must:

a) set the InputBufferOffset to 0
b) send a zero-length InputBuffer

Doing a) is trivial but b) is a bit more tricky.

The packet is allocated according to it's StructureSize, which takes
into account an extra 1 byte buffer which we don't need
here. StructureSize fields must have constant values no matter the
actual length of the whole packet so we can't just edit that constant.

Both the NetBIOS-over-TCP message length ("rfc1002 length") L and the
iovec length L' have to be updated. Since L' is computed from L we
just update L by decrementing it by one.

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-10-25 12:57:57 -05:00
Benjamin Gilbert
5b454a6455 cifs: Select all required crypto modules
Some dependencies were lost when CIFS_SMB2 was merged into CIFS.

Fixes: 2a38e12053 ("[SMB3] Remove ifdef since SMB3 (and later) now STRONGLY preferred")
Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2017-10-25 12:57:50 -05:00
Chris Wilson
bcbd5c33a3 drm/i915/guc: Always enable the breadcrumbs irq
The execlists emulation on top of the GuC (used for scheduling and
preemption) depends on the MI_USER_INTERRUPT for its notifications and
tasklet action. As we always employ the irq, there is no advantage in
ever disabling it while we are using the GuC, so allow us to arm the
breadcrumb irq when enabling GuC submission and disarm upon disabling.
The impact should be lessened by the delayed irq disabling we do (we
only disable after receiving an interrupt for which no one was wanting),
but allowing guc to explicitly manage the irq in relation to itself is
simpler and prevents an issue with losing an interrupt for preemption
as it is not coupled to an active request.

Internally, we add a reference counter (breadcrumbs.irq_enabled) as a
simple mechanism to allow GuC to keep the breadcrumb irq enabled. To
improve upon always enabling the irq while guc is selected, we need
to hook into the parking facility of intel_engines so that we only enable
the breadcrumbs while the GT is active (one step better would be to
individually park/unpark each engine).

In effect, this means that we keep the breadcrumb irq always enabled for
the entire duration the guc is busy, whereas before we would try to
switch it off whenever we idled for more than interrupt with no
associated waiters. The difference *should* be negligible in practice!

v2: Stop abusing fence signaling (and its auxiliary data structures) to
enable the breadcrumbs irqs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>,
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>,
Link: https://patchwork.freedesktop.org/patch/msgid/20171025143943.7661-3-chris@chris-wilson.co.uk
2017-10-25 18:47:30 +01:00
Chris Wilson
aba5e27858 drm/i915: Add a hook for making the engines idle (parking) and unparking
In the next patch, we will want to install a callback when the engines
(GT as a whole) become idle and similarly when they first become busy.
To enable that callback, first rename intel_engines_mark_idle() to
intel_engines_park() and provide the companion intel_engines_unpark().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025143943.7661-2-chris@chris-wilson.co.uk
2017-10-25 18:47:30 +01:00
oulijun
b156269d88 RDMA/hns: Add modify CQ support for hip08
It is needed to call modify cq API for modifying cq
context fields for controlling event generation
moderations. This patch mainly adds it.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 13:37:07 -04:00
Wei Hu(Xavier)
3180236cce RDMA/hns: Update the PD&CQE&MTT specification in hip08
This patch updates the PD specification to 16M for hip08. And it
updates the numbers of mtt and cqe segments for the buddy.

As the CQE supports hop num 1 addressing, the CQE specification is
64k. This patch updates to set the CQE specification to 64k.

Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 13:37:07 -04:00
Wei Hu(Xavier)
29a1fe5d70 RDMA/hns: Update the IRRL table chunk size in hip08
As the increase of the IRRL specification in hip08, the IRRL table
chunk size needs to be updated.
This patch updates the IRRL table chunk size to 256k for hip08.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 13:37:07 -04:00
Wei Hu(Xavier)
9a8982dc89 RDMA/hns: Support WQE/CQE/PBL page size configurable feature in hip08
This patch updates to support WQE, CQE and PBL page size configurable
feature, which includes base address page size and buffer page size.

Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 13:37:07 -04:00
Erez Shitrit
b9595c5bac IB/ipoib: Change number of TX wqe to 64
NAPI budget is 64 packets, while maximum polling size for
the send CQ is 16. Let's bring them in sync, so the NAPI
budget will be reused completely.

Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 13:36:50 -04:00
Erez Shitrit
8966e28d2e IB/ipoib: Use NAPI in UD/TX flows
Instead of explicit call to poll_cq of the tx ring, use the NAPI mechanism
to handle the completions of each packet that has been sent to the HW.

The next major changes were taken:
 * The driver init completion function in the creation of the send CQ,
   that function triggers the napi scheduling.
 * The driver uses CQ for RX for both modes UD and CM, and CQ for TX
   for CM and UD.

Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 13:36:50 -04:00
Erez Shitrit
2c104ea683 IB/ipoib: Get rid of the tx_outstanding variable in all modes
The first step toward using NAPI in the UD/TX flow is to separate
between two flows, the NAPI and the xmit, meaning no use of shared
variables between both flows.

This patch takes out the tx_outstanding variable that was used in both
flows and instead the driver uses the 2 cyclic ring variables: tx_head
and tx_tail, tx_head used in the xmit flow and tx_tail in the NAPI flow.

Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 13:36:50 -04:00
Rodrigo Vivi
43037c86d1 drm/i915/cnl: Allow 2 pixel per clock on Cannonlake.
This is heavily based on a initial patch provided by Ville
plus all changes provided later by Ander.

As Geminilake, Cannonlake also supports 2 pixels per clock.

Different from Geminilake we are not implementing the 99% Wa.
But we can revisit that decision later if we find out
any limitation on later CNL SKUs.

v2: Rebase on top of commit 'd305e06146 ("drm/i915: Track
minimum acceptable cdclk instead of "minimum dotclock")'

v3: When fixing HDMI on CNL I noticed that I missed to convert
    back the doubled pixel rate to cdclk.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003223142.26264-1-rodrigo.vivi@intel.com
2017-10-25 10:36:01 -07:00
Leon Romanovsky
5556176d8c RDMA: Remove Sean's and Hal's emails from MAINTAINER file
RDMA subsystem has one active maintainer who can apply
patches - Doug Ledford, but the RDMA entries in MAINTAINER file
are not stating it. The following patch removes Sean's and Hal's
emails from the maintainers list.

It will allow clean get_maintaner.pl output which is needed for people
outside of our community and various semi-automatic tools.

Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25 13:09:14 -04:00
Ingo Molnar
57646b6fda perf/core inline improvements:
From Milian's cover letter: (Milian Wolff)
 
 This series of patches completely reworks the way inline frames are
 handled.  Instead of querying for the inline nodes on-demand in the
 individual tools, we now create proper callchain nodes for inlined
 frames. The advantages this approach brings are numerous:
 
 - Less duplicated code in the individual browser
 
 - Aggregated cost for inlined frames for the --children top-down list
 
 - Various bug fixes that arose from querying for a srcline/symbol based on
   the IP of a sample, which will always point to the last inlined frame
   instead of the corresponding non-inlined frame
 
 - Overall much better support for visualizing cost for heavily-inlined C++
   code, which simply was confusing and unreliably before
 
 - srcline honors the global setting as to whether full paths or basenames
   should be shown
 
 - Caches for inlined frames and srcline information, which allow us to
   enable inline frame handling by default
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlnwsBYACgkQ1lAW81NS
 qkBQrxAAkARBYgZS5y2WFSDB8zIvXHBPiMmTDNwpgAIUo66YMAI9+y18VoTGBwju
 kTbD1VhLQAg1DRODuGjwnT2lKLDkl2kYhP5hwzFZYk7L8/F0jBtrPNI3uM3kOgvm
 zfmMHpKMWCdRU1gcLqmhW3gUs5ySHj7iZuZWWTlyrmTJoBzpQFRnGi89gNds5NkC
 0nY0HU099HnTgBcAkidExg5RYKhFjevYnisuBW4Ob7g34WMYgL44cVepnBzuBZdn
 uKYFFUsnd+aL4Spq6jr+W31XVv61xUKttaSKT7PUrWiDGzRdpTQZLXwzd7cyJShF
 e0TGvTtqt1xSpTU9YCZvAqfs0K5gkp0e9OddYB/P1Wne1oj7tWAa4kKFdccYFMY1
 +rbPMK0A/ms37QMx3m+/zJ+07dxuu94W/MI6k+KW+Al10QnKQSaAzLe7XxZU4p8y
 TA7KOrrZI/KYOvTyIHpeeI1LFHnn4OZy+LnkoxxH71fmCphsUsGvNIhzID1ntffK
 I/RLhpe1+9425NhViZlCoD4+vIMf9CCpJYhGNQZ6ndK+ESacuWUa4DTRJYUnF5xZ
 ducZefpm7XCTwnvkkvNN3JwmeBI0H9ePaepvLjLJP11RzZyE9fgcRdQIcPBNC76+
 a2NEkq/ean+pEFiz6S5vYrz0DSw5FTfJbfCVrVXQkYQVZcCU7F8=
 =IEC2
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.15-20171025' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core inline improvements from Arnaldo Carvalho de Melo:

From Milian's cover letter: (Milian Wolff)

"This series of patches completely reworks the way inline frames are
 handled.  Instead of querying for the inline nodes on-demand in the
 individual tools, we now create proper callchain nodes for inlined
 frames. The advantages this approach brings are numerous:

 - Less duplicated code in the individual browser

 - Aggregated cost for inlined frames for the --children top-down list

 - Various bug fixes that arose from querying for a srcline/symbol based on
   the IP of a sample, which will always point to the last inlined frame
   instead of the corresponding non-inlined frame

 - Overall much better support for visualizing cost for heavily-inlined C++
   code, which simply was confusing and unreliably before

 - srcline honors the global setting as to whether full paths or basenames
   should be shown

 - Caches for inlined frames and srcline information, which allow us to
   enable inline frame handling by default"

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25 19:07:46 +02:00
Markus Elfring
d9ecbef394 ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
The local variable "bus" will eventually be set to an appropriate pointer
a bit later. Thus omit the explicit initialisation at the beginning.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-10-25 09:54:08 -07:00
Markus Elfring
f33aadd266 ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-10-25 09:54:02 -07:00
Juergen Gross
298d275d4d xen/gntdev: avoid out of bounds access in case of partial gntdev_mmap()
In case gntdev_mmap() succeeds only partially in mapping grant pages
it will leave some vital information uninitialized needed later for
cleanup. This will lead to an out of bounds array access when unmapping
the already mapped pages.

So just initialize the data needed for unmapping the pages a little bit
earlier.

Cc: <stable@vger.kernel.org>
Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-10-25 12:48:13 -04:00
Ravi Bangoria
331c7cb307 perf symbols: Fix memory corruption because of zero length symbols
Perf top is often crashing at very random locations on powerpc.  After
investigating, I found the crash only happens when sample is of zero
length symbol. Powerpc kernel has many such symbols which does not
contain length details in vmlinux binary and thus start and end
addresses of such symbols are same.

Structure

  struct sym_hist {
        u64                   nr_samples;
        u64                   period;
        struct sym_hist_entry addr[0];
  };

has last member 'addr[]' of size zero. 'addr[]' is an array of addresses
that belongs to one symbol (function). If function consist of 100
instructions, 'addr' points to an array of 100 'struct sym_hist_entry'
elements. For zero length symbol, it points to the *empty* array, i.e.
no members in the array and thus offset 0 is also invalid for such
array.

  static int __symbol__inc_addr_samples(...)
  {
        ...
        offset = addr - sym->start;
        h = annotation__histogram(notes, evidx);
        h->nr_samples++;
        h->addr[offset].nr_samples++;
        h->period += sample->period;
        h->addr[offset].period += sample->period;
        ...
  }

Here, when 'addr' is same as 'sym->start', 'offset' becomes 0, which is
valid for normal symbols but *invalid* for zero length symbols and thus
updating h->addr[offset] causes memory corruption.

Fix this by adding one dummy element for zero length symbols.

Link: https://lkml.org/lkml/2016/10/10/148
Fixes: edee44be59 ("perf annotate: Don't throw error for zero length symbols")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1508854806-10542-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25 13:01:09 -03:00
Nicholas Piggin
26e53d5ebe powerpc/64s/radix: Fix preempt imbalance in TLB flush
Fixes: 424de9c6e3 ("powerpc/mm/radix: Avoid flushing the PWC on every flush_tlb_range")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-25 18:00:00 +02:00
Rob Herring
e45fe7f788 scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
Pickup the fix for handling unresolved phandles in overlays.

This adds the following commits from upstream:

c1e55a5513e9 checks: fix handling of unresolved phandles for dts plugins
f8872e29ce06 tests: Avoid 64-bit arithmetic in assembler
48c91c08bcfa libfdt: add stringlist functions to linker script

Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-25 10:59:13 -05:00
Lionel Landwerlin
7277f75504 drm/i915/perf: fix perf enable/disable ioctls with 32bits userspace
The compat callback was missing and triggered failures in 32bits
userspace when enabling/disable the perf stream. We don't require any
particular processing here as these ioctls don't take any argument.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: eec688e142 ("drm/i915: Add i915 perf infrastructure")
Cc: linux-stable <stable@vger.kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024152728.4873-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 191f896085)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-25 08:16:13 -07:00
Dave Martin
fa3eb71d96 arm64: asm-bug: Renumber macro local labels to avoid clashes
Currently ASM_BUG() and its constituent macros define local
assembler labels 0, 1 and 2 internally, which carries a high risk
of clash with callers' labels and consequent mis-assembly.

This patch gives the labels a big random offset to minimise the
chance of such errors.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-25 15:57:15 +01:00
Miklos Szeredi
c6cdd51404 fuse: fix READDIRPLUS skipping an entry
Marios Titas running a Haskell program noticed a problem with fuse's
readdirplus: when it is interrupted by a signal, it skips one directory
entry.

The reason is that fuse erronously updates ctx->pos after a failed
dir_emit().

The issue originates from the patch adding readdirplus support.

Reported-by: Jakob Unterwurzacher <jakobunt@gmail.com>
Tested-by: Marios Titas <redneb@gmx.com> 
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 0b05b18381 ("fuse: implement NFS-like readdirplus support")
Cc: <stable@vger.kernel.org> # v3.9
2017-10-25 16:34:27 +02:00
Joonas Lahtinen
22a8a4fc93 drm/i915: Disable lazy PPGTT page table optimization for vGPU
When running under virtualization (vGPU active), we must disable
the lazy PPGTT page table initialization optimization introduced by
commit 1482667324 ("drm/i915: Only initialize partially filled
pagetables").

We must do this because GVT-g makes unduly assumptions about guest
behaviour, which this optimization breaks. This results in following
looking errors in the host:

ERROR gvt: guest page write error -22, gfn 0x7ada8, pa 0x7ada89a8, var 0x6, len 1

The real fix is to not to depend on i915 driver behaviour, but instead
either rely on only the contracts that i915 has with the hardware, or
add some paravirtualization. While the real fix is en route, it won't
be finished in time for 4.15, so the best option is to disable the
optimization for now when vGPU is active to avoid breaking 4.15 guests
in existing VM environments.

Fixes: 1482667324 ("drm/i915: Only initialize partially filled pagetables")
Suggested-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
[Joonas: Rewrote the commit message and added tags.]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023153209.10527-1-joonas.lahtinen@linux.intel.com
2017-10-25 17:24:59 +03:00
Milian Wolff
d8a88dd243 perf util: Enable handling of inlined frames by default
Now that we have caches in place to speed up the process of finding
inlined frames and srcline information repeatedly, we can enable this
useful option by default.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-6-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25 10:50:47 -03:00
Milian Wolff
1fb7d06a50 perf report: Use srcline from callchain for hist entries
This also removes the symbol name from the srcline column, more on this
below.

This ensures we use the correct srcline, which could originate from a
potentially inlined function. The hist entries used to query for the
srcline based purely on the IP, which leads to wrong results for inlined
entries.

Before:

~~~~~
  perf report --inline -s srcline -g none --stdio
  ...
  # Children      Self  Source:Line
  # ........  ........  ..................................................................................................................................
  #
      94.23%     0.00%  __libc_start_main+18446603487898210537
      94.23%     0.00%  _start+41
      44.58%     0.00%  main+100
      44.58%     0.00%  std::_Norm_helper<true>::_S_do_it<double>+100
      44.58%     0.00%  std::__complex_abs+100
      44.58%     0.00%  std::abs<double>+100
      44.58%     0.00%  std::norm<double>+100
      36.01%     0.00%  hypot+18446603487892193300
      25.81%     0.00%  main+41
      25.81%     0.00%  std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+41
      25.81%     0.00%  std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+41
      25.75%    25.75%  random.h:143
      18.39%     0.00%  main+57
      18.39%     0.00%  std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+57
      18.39%     0.00%  std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+57
      13.80%    13.80%  random.tcc:3330
       5.64%     0.00%  ??:0
       4.13%     4.13%  __hypot_finite+163
       4.13%     0.00%  __hypot_finite+18446603487892193443
...
~~~~~

After:

~~~~~
  perf report --inline -s srcline -g none --stdio
  ...
  # Children      Self  Source:Line
  # ........  ........  ...........................................
  #
      94.30%     1.19%  main.cpp:39
      94.23%     0.00%  __libc_start_main+18446603487898210537
      94.23%     0.00%  _start+41
      48.44%     1.70%  random.h:1823
      48.44%     0.00%  random.h:1814
      46.74%     2.53%  random.h:185
      44.68%     0.10%  complex:589
      44.68%     0.00%  complex:597
      44.68%     0.00%  complex:654
      44.68%     0.00%  complex:664
      40.61%    13.80%  random.tcc:3330
      36.01%     0.00%  hypot+18446603487892193300
      26.81%     0.00%  random.h:151
      26.81%     0.00%  random.h:332
      25.75%    25.75%  random.h:143
       5.64%     0.00%  ??:0
       4.13%     4.13%  __hypot_finite+163
       4.13%     0.00%  __hypot_finite+18446603487892193443
...
~~~~~

Note that this change removes the symbol from the source:line hist
column. If this information is desired, users should explicitly query
for it if needed. I.e. run this command instead:

~~~~~
  perf report --inline -s sym,srcline -g none --stdio
  ...
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'cycles:uppp'
  # Event count (approx.): 1381229476
  #
  # Children      Self  Symbol                                                                                                                               Source:Line
  # ........  ........  ...................................................................................................................................  ...........................................
  #
      94.30%     1.19%  [.] main                                                                                                                             main.cpp:39
      94.23%     0.00%  [.] __libc_start_main                                                                                                                __libc_start_main+18446603487898210537
      94.23%     0.00%  [.] _start                                                                                                                           _start+41
      48.44%     0.00%  [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)  random.h:1814
      48.44%     0.00%  [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)  random.h:1823
      46.74%     0.00%  [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined)  random.h:185
      44.68%     0.00%  [.] std::_Norm_helper<true>::_S_do_it<double> (inlined)                                                                              complex:654
      44.68%     0.00%  [.] std::__complex_abs (inlined)                                                                                                     complex:589
      44.68%     0.00%  [.] std::abs<double> (inlined)                                                                                                       complex:597
      44.68%     0.00%  [.] std::norm<double> (inlined)                                                                                                      complex:664
      39.80%    13.59%  [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >               random.tcc:3330
      36.01%     0.00%  [.] hypot                                                                                                                            hypot+18446603487892193300
      26.81%     0.00%  [.] std::__detail::__mod<unsigned long, 2147483647ul, 16807ul, 0ul> (inlined)                                                        random.h:151
      26.81%     0.00%  [.] std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>::operator() (inlined)                                 random.h:332
      25.75%     0.00%  [.] std::__detail::_Mod<unsigned long, 2147483647ul, 16807ul, 0ul, true, true>::__calc (inlined)                                     random.h:143
      25.19%    25.19%  [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >               random.h:143
       4.13%     4.13%  [.] __hypot_finite                                                                                                                   __hypot_finite+163
       4.13%     0.00%  [.] __hypot_finite                                                                                                                   __hypot_finite+18446603487892193443
...
~~~~~

Compared to the old behavior, this reduces duplication in the output.
Before we used to print the symbol name in the srcline column even
when the sym column was explicitly requested. I.e. the output was:

~~~~~
  perf report --inline -s sym,srcline -g none --stdio
  ...
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'cycles:uppp'
  # Event count (approx.): 1381229476
  #
  # Children      Self  Symbol                                                                                                                               Source:Line
  # ........  ........  ...................................................................................................................................  ..................................................................................................................................
  #
      94.23%     0.00%  [.] __libc_start_main                                                                                                                __libc_start_main+18446603487898210537
      94.23%     0.00%  [.] _start                                                                                                                           _start+41
      44.58%     0.00%  [.] main                                                                                                                             main+100
      44.58%     0.00%  [.] std::_Norm_helper<true>::_S_do_it<double> (inlined)                                                                              std::_Norm_helper<true>::_S_do_it<double>+100
      44.58%     0.00%  [.] std::__complex_abs (inlined)                                                                                                     std::__complex_abs+100
      44.58%     0.00%  [.] std::abs<double> (inlined)                                                                                                       std::abs<double>+100
      44.58%     0.00%  [.] std::norm<double> (inlined)                                                                                                      std::norm<double>+100
      36.01%     0.00%  [.] hypot                                                                                                                            hypot+18446603487892193300
      25.81%     0.00%  [.] main                                                                                                                             main+41
      25.81%     0.00%  [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined)  std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+41
      25.81%     0.00%  [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)  std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+41
      25.69%    25.69%  [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >               random.h:143
      18.39%     0.00%  [.] main                                                                                                                             main+57
      18.39%     0.00%  [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined)  std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+57
      18.39%     0.00%  [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)  std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+57
      13.80%    13.80%  [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >               random.tcc:3330
       4.13%     4.13%  [.] __hypot_finite                                                                                                                   __hypot_finite+163
       4.13%     0.00%  [.] __hypot_finite                                                                                                                   __hypot_finite+18446603487892193443
...
~~~~~

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-5-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25 10:50:46 -03:00
Milian Wolff
21ac9d547f perf report: Cache srclines for callchain nodes
On one hand this ensures that the memory is properly freed when the DSO
gets freed. On the other hand this significantly speeds up the
processing of the callchain nodes when lots of srclines are requested.
For one of my data files e.g.:

Before:

 Performance counter stats for 'perf report -s srcline -g srcline --stdio':

      52496.495043      task-clock (msec)         #    0.999 CPUs utilized
               634      context-switches          #    0.012 K/sec
                 2      cpu-migrations            #    0.000 K/sec
           191,561      page-faults               #    0.004 M/sec
   165,074,498,235      cycles                    #    3.144 GHz
   334,170,832,408      instructions              #    2.02  insn per cycle
    90,220,029,745      branches                  # 1718.591 M/sec
       654,525,177      branch-misses             #    0.73% of all branches

      52.533273822 seconds time elapsedProcessed 236605 events and lost 40 chunks!

After:

 Performance counter stats for 'perf report -s srcline -g srcline --stdio':

      22606.323706      task-clock (msec)         #    1.000 CPUs utilized
                31      context-switches          #    0.001 K/sec
                 0      cpu-migrations            #    0.000 K/sec
           185,471      page-faults               #    0.008 M/sec
    71,188,113,681      cycles                    #    3.149 GHz
   133,204,943,083      instructions              #    1.87  insn per cycle
    34,886,384,979      branches                  # 1543.214 M/sec
       278,214,495      branch-misses             #    0.80% of all branches

      22.609857253 seconds time elapsed

Note that the difference is only this large when `--inline` is not
passed. In such situations, we would use the inliner cache and thus do
not run this code path that often.

I think that this cache should actually be used in other places, too.
When looking at the valgrind leak report for perf report, we see tons of
srclines being leaked, most notably from calls to
hist_entry__get_srcline. The problem is that get_srcline has many
different formatting options (show_sym, show_addr, potentially even
unwind_inlines when calling __get_srcline directly). As such, the
srcline cannot easily be cached for all calls, or we'd have to add
caches for all formatting combinations (6 so far). An alternative would
be to remove the formatting options and handle that on a different level
- i.e. print the sym/addr on demand wherever we actually output
something. And the unwind_inlines could be moved into a separate
function that does not return the srcline.

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-4-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25 10:50:46 -03:00
Milian Wolff
b38775cf76 perf report: Cache failed lookups of inlined frames
When no inlined frames could be found for a given address, we did not
store this information anywhere. That means we potentially do the costly
inliner lookup repeatedly for cases where we know it can never succeed.

This patch makes dso__parse_addr_inlines always return a valid
inline_node. It will be empty when no inliners are found. This enables
us to cache the empty list in the DSO, thereby improving the performance
when many addresses fail to find the inliners.

For my trivial example, the performance impact is already quite
significant:

Before:

~~~~~
 Performance counter stats for 'perf report --stdio --inline -g srcline -s srcline' (5 runs):

        594.804032      task-clock (msec)         #    0.998 CPUs utilized            ( +-  0.07% )
                53      context-switches          #    0.089 K/sec                    ( +-  4.09% )
                 0      cpu-migrations            #    0.000 K/sec                    ( +-100.00% )
             5,687      page-faults               #    0.010 M/sec                    ( +-  0.02% )
     2,300,918,213      cycles                    #    3.868 GHz                      ( +-  0.09% )
     4,395,839,080      instructions              #    1.91  insn per cycle           ( +-  0.00% )
       939,177,205      branches                  # 1578.969 M/sec                    ( +-  0.00% )
        11,824,633      branch-misses             #    1.26% of all branches          ( +-  0.10% )

       0.596246531 seconds time elapsed                                          ( +-  0.07% )
~~~~~

After:

~~~~~
 Performance counter stats for 'perf report --stdio --inline -g srcline -s srcline' (5 runs):

        113.111405      task-clock (msec)         #    0.990 CPUs utilized            ( +-  0.89% )
                29      context-switches          #    0.255 K/sec                    ( +- 54.25% )
                 0      cpu-migrations            #    0.000 K/sec
             5,380      page-faults               #    0.048 M/sec                    ( +-  0.01% )
       432,378,779      cycles                    #    3.823 GHz                      ( +-  0.75% )
       670,057,633      instructions              #    1.55  insn per cycle           ( +-  0.01% )
       141,001,247      branches                  # 1246.570 M/sec                    ( +-  0.01% )
         2,346,845      branch-misses             #    1.66% of all branches          ( +-  0.19% )

       0.114222393 seconds time elapsed                                          ( +-  1.19% )
~~~~~

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25 10:50:45 -03:00
Milian Wolff
bf36eb5c4b perf report: Properly handle branch count in match_chain()
Some of the code paths I introduced before returned too early without
running the code to handle a node's branch count.  By refactoring
match_chain to only have one exit point, this can be remedied.

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1707691.qaJ269GSZW@agathebauer
Link: http://lkml.kernel.org/r/20171018185350.14893-2-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25 10:50:37 -03:00
Alex Williamson
16b6c8bb68 PCI: Detach driver before procfs & sysfs teardown on device remove
When removing a device, for example a VF being removed due to SR-IOV
teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual
hot-unplug, we first remove the procfs and sysfs attributes for the device
before attempting to release the device from any driver bound to it.
Unbinding the driver from the device can take time.  The device might need
to write out data or it might be actively in use.  If it's in use by
userspace through a vfio driver, the unbind might block until the user
releases the device.  This leads to a potentially non-trivial amount of
time where the device exists, but we've torn down the interfaces that
userspace uses to examine devices, for instance lspci might generate this
sort of error:

  pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config
  lspci: Unable to read the standard configuration space header of device 0000:01:0a.3

We don't seem to have any dependence on this teardown ordering in the
kernel, so let's unbind the driver first, which is also more symmetric with
the instantiation of the device in pci_bus_add_device().

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-25 08:47:10 -05:00