Commit graph

932,869 commits

Author SHA1 Message Date
Lothar Waßmann
ef4eec2bc3 ARM: dts: imx53-tx53: add support for I2C bus recovery
The imx-i2c driver supports automatic bus recovery via the GPIO
function of the I2C pins. Enable this functionality for the Ka-Ro
electronics TX53 modules.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23 08:19:35 +08:00
Lothar Waßmann
d51916072c ARM: dts: imx53-tx53: use explicit pad_ctl settings for I2C pins
Don't rely on the padctl settings established by the boot loader, but
explicitly specify the padctl values in DTB. This is also necessary to
be able to use the DTB files from the Linux kernel for future U-Boot
versions that support HW configuration via DTB.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23 08:19:34 +08:00
Lothar Waßmann
a2802e6532 ARM: dts: imx53-tx53: add trickle-charge config for DS1339
As the DS1339 driver now supports enabling the trickle charge feature
via DTB, add the appropriate properties to utilize this feature.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23 08:19:33 +08:00
Lothar Waßmann
78256ffbce ARM: dts: imx53-tx53: remove obsolete eeti,egalax_ts
The display, that incorporates this touchpanel is obsolete and won't
be supported any more.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23 08:19:33 +08:00
Lothar Waßmann
08f8275dca ARM: dts: imx53-tx53: remove the regulators bus
It is not recommended to place the regulator nodes inside 'simple-bus',
so adjust them accordingly.

The motivation for rearranging this is to make it easier to add new
regulator nodes in the future.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23 08:19:32 +08:00
Lothar Waßmann
8771c7493a ARM: dts: imx53-tx53: Relicense the TX53 dts files under GPLv2/X11
The current GPL only licensing on the dts files makes it very
impractical for other software components licensed under another
license.

In order to make it easier for them to reuse our device trees,
relicense our dts files first under a GPL/X11 dual-license.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23 08:19:32 +08:00
Lothar Waßmann
10c8b7738d ARM: dts: imx28-tx28: add trickle-charge config for DS1339
As the DS1339 driver now supports enabling the trickle charge feature
via DTB, add the appropriate properties to utilize this feature.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23 08:19:31 +08:00
Alexei Starovoitov
e27afb84b4 selftests/bpf: fix broken build of test_maps
fix multiple build errors and warnings

1.
test_maps.c: In function ‘test_map_rdonly’:
test_maps.c:1051:30: error: ‘BPF_F_RDONLY’ undeclared (first use in this function)
        MAP_SIZE, map_flags | BPF_F_RDONLY);

2.
test_maps.c:1048:6: warning: unused variable ‘i’ [-Wunused-variable]
  int i, fd, key = 0, value = 0;

3.
test_maps.c:1087:2: error: called object is not a function or function pointer
  assert(bpf_map_lookup_elem(fd, &key, &value) == -1 && errno == EPERM);

4.
./bpf_helpers.h:72:11: error: use of undeclared identifier 'BPF_FUNC_getsockopt'
        (void *) BPF_FUNC_getsockopt;

Fixes: e043325b30 ("bpf: Add tests for eBPF file mode")
Fixes: 6e71b04a82 ("bpf: Add file mode configuration into bpf maps")
Fixes: cd86d1fd21 ("bpf: Adding helper function bpf_getsockops")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-23 01:06:31 +01:00
Linus Torvalds
02982f8550 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
 "A fix for a broken commit in the previous pull breaking automatic
  module loading of input handlers, such ad evdev"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: do not use property bits when generating module alias
2017-10-22 16:19:12 -04:00
Dmitry Torokhov
09c3e01b25 Input: do not use property bits when generating module alias
The commit 8724ecb072 ("Input: allow matching device IDs on property
bits") started using property bits when generating module aliases for input
handlers, but did not adjust the generation of MODALIAS attribute on input
device uevents, breaking automatic module loading. Given that no handler
currently uses property bits in their module tables, let's revert this part
of the commit for now.

Reported-by: Damien Wyart <damien.wyart@gmail.com>
Tested-by: Damien Wyart <damien.wyart@gmail.com>
Fixes: 8724ecb072 ("Input: allow matching device IDs on property bits")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-22 12:49:59 -07:00
Lucas Stach
330b52bd9b drm/etnaviv: short-circuit perfmon ioctls
The feature implementation isn't stable yet. Reject any attempt to use
the IOCTLs for now. This keeps most of the code in place, so we can stabilize
it in-tree, but keeps userspace from using the feature for now.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-10-22 18:41:56 +02:00
Lucas Stach
988c3b3859 Revert "drm/etnaviv: submit supports performance monitor requests"
The performance monitoring feature isn't stable enough yet, so don't advertise
it to userspace yet.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-10-22 18:41:44 +02:00
David S. Miller
f8ddadc4db Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
There were quite a few overlapping sets of changes here.

Daniel's bug fix for off-by-ones in the new BPF branch instructions,
along with the added allowances for "data_end > ptr + x" forms
collided with the metadata additions.

Along with those three changes came veritifer test cases, which in
their final form I tried to group together properly.  If I had just
trimmed GIT's conflict tags as-is, this would have split up the
meta tests unnecessarily.

In the socketmap code, a set of preemption disabling changes
overlapped with the rename of bpf_compute_data_end() to
bpf_compute_data_pointers().

Changes were made to the mv88e6060.c driver set addr method
which got removed in net-next.

The hyperv transport socket layer had a locking change in 'net'
which overlapped with a change of socket state macro usage
in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 13:39:14 +01:00
Borislav Petkov
bfc1168de9 x86/cpu/AMD: Apply the Erratum 688 fix when the BIOS doesn't
Some F14h machines have an erratum which, "under a highly specific
and detailed set of internal timing conditions" can lead to skipping
instructions and RIP corruption.

Add the fix for those machines when their BIOS doesn't apply it or
there simply isn't BIOS update for them.

Tested-by: <mirh@protonmail.ch>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sherry Hurwitz <sherry.hurwitz@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: http://lkml.kernel.org/r/20171022104731.28249-1-bp@alien8.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197285
[ Added pr_info() that we activated the workaround. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-22 13:06:02 +02:00
Linus Torvalds
936fd00549 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
 "A couple of fixes addressing the following issues:

   - The last polishing for the TLB code, removing the last BUG_ON() and
     the debug file along with tidying up the lazy TLB code.

   - Prevent triple fault on 1st Gen. 486 caused by stupidly calling the
     early IDT setup after the first function which causes a fault which
     should be caught by the exception table.

   - Limit the mmap of /dev/mem to valid addresses

   - Prevent late microcode loading on Broadwell X

   - Remove a redundant assignment in the cache info code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Limit mmap() of /dev/mem to valid physical addresses
  x86/mm: Remove debug/x86/tlb_defer_switch_to_init_mm
  x86/mm: Tidy up "x86/mm: Flush more aggressively in lazy TLB mode"
  x86/mm/64: Remove the last VM_BUG_ON() from the TLB code
  x86/microcode/intel: Disable late loading on model 79
  x86/idt: Initialize early IDT before cr4_init_shadow()
  x86/cpu/intel_cacheinfo: Remove redundant assignment to 'this_leaf'
2017-10-22 06:58:23 -04:00
Linus Torvalds
9e415a8edc Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
 "A single fix to make the cs5535 clock event driver robust agaist
  spurious interrupts"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents/drivers/cs5535: Improve resilience to spurious interrupts
2017-10-22 06:56:25 -04:00
Linus Torvalds
5670a8471e Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp/hotplug fix from Thomas Gleixner:
 "The recent rework of the callback invocation missed to cleanup the
  leftovers of the operation, so under certain circumstances a
  subsequent CPU hotplug operation accesses stale data and crashes.
  Clean it up."

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Reset node state after operation
2017-10-22 06:54:42 -04:00
Linus Torvalds
085cf9bfc9 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
 "A series of fixes for perf tooling:

   - Make xyarray return the X/Y size correctly which fixes a crash in
     the exit code.

   - Fix the libc path in test so it works not only on Debian/Ubuntu
     correctly

   - Check for eBPF file existance and output a useful error message
     instead of failing to compile a non existant file

   - Make sure perf_hpp_fmt is not longer references before freeing it

   - Use list_del_init() in the histogram code to prevent a crash when
     the already deleted element is deleted again

   - Remove the leftovers of the removed '-l' option

   - Add reviewer entries to the MAINTAINERS file"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf test shell trace+probe_libc_inet_pton.sh: Be compatible with Debian/Ubuntu
  perf xyarray: Fix wrong processing when closing evsel fd
  perf buildid-list: Fix crash when processing PERF_RECORD_NAMESPACE
  perf record: Fix documentation for a inexistent option '-l'
  perf tools: Add long time reviewers to MAINTAINERS
  perf tools: Check wether the eBPF file exists in event parsing
  perf hists: Add extra integrity checks to fmt_free()
  perf hists: Fix crash in perf_hpp__reset_output_field()
2017-10-22 06:52:53 -04:00
Linus Torvalds
4f184d7d84 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
 "A set of small fixes mostly in the irq drivers area:

   - Make the tango irq chip work correctly, which requires a new
     function in the generiq irq chip implementation

   - A set of updates to the GIC-V3 ITS driver removing a bogus BUG_ON()
     and parsing the VCPU table size correctly"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: generic chip: remove irq_gc_mask_disable_reg_and_ack()
  irqchip/tango: Use irq_gc_mask_disable_and_ack_set
  genirq: generic chip: Add irq_gc_mask_disable_and_ack_set()
  irqchip/gic-v3-its: Add missing changes to support 52bit physical address
  irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size
  irqchip/gic-v3-its: Fix the incorrect BUG_ON in its_init_vpe_domain()
  DT: arm,gic-v3: Update the ITS size in the examples
2017-10-22 06:42:58 -04:00
Linus Torvalds
b8d389e8f3 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
 "Plug a memory leak in the instruction decoder"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix memory leak in decode_instructions()
2017-10-22 06:39:58 -04:00
Markus Elfring
4dd9eab39c powerpc/pseries: Cleanup error handling in iommu_pseries_alloc_group()
Although kfree(NULL) is legal, it's a bit lazy to rely on that to
implement the error handling. So do it the normal Linux way using
labels for each failure path.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[mpe: Squash a few patches and rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:16:36 +02:00
Markus Elfring
c28237f1d4 powerpc-opal: Fix a typo in a comment line of two file headers
Fix a word in these descriptions.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:16:36 +02:00
Markus Elfring
a7cd458621 powerpc/axonram: Drop unnecessary variable initialisation
The local variable "rc" will eventually be set only to an error code.
Thus omit the explicit initialisation at the beginning.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Geert Uytterhoeven
3d2d4339cc powerpc: dts: acadia: DT fix s/#interrupts-parent/#interrupt-parent/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Michael Ellerman
05c14c0313 powerpc/perf/hv-24x7: Fix incorrect comparison in memord
In the hv-24x7 code there is a function memord() which tries to
implement a sort function return -1, 0, 1. However one of the
conditions is incorrect, such that it can never be true, because we
will have already returned.

I don't believe there is a bug in practice though, because the
comparisons are an optimisation prior to calling memcmp().

Fix it by swapping the second comparision, so it can be true.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Michael Ellerman
727f13616c powerpc: Disable the fast-endian switch syscall by default
Back in 2008 we added support for "fast little-endian switch" in the
syscall path. This added a special case syscall number 0x1ebe, which
is caught very early in the system call exception and switches endian
with as little overhead as possible. See commit 745a14cc26
("[POWERPC] Add fast little-endian switch system call") for full
details.

Although it is fast, it's also completely non standard. The "syscall
number" is out of the range of normal syscalls, it can't be traced or
audited, and it's a bit of a wart. To the best of our knowledge it was
only used by one program, now long since discontinued.

So in an effort to shake out any current users, put it behind a config
option, and make it default n. If anyone *is* using it they can
quickly reinstate it with a rebuild, and we can flip it to default y.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Michael Ellerman
5c2511bff4 powerpc/64s: Move the two FAST_ENDIAN macros next to each other
So we can #ifdef them in the next patch.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Michael Ellerman
90d6473747 powerpc/xmon: Add kstack base to paca dump
When dumping the paca in xmon we currently show kstack. Although it's
not hard it's a bit fiddly to work out what the bounds of the kernel
stack should be based on the kstack value.

To make life easier and "kstack_base" which is the base (lowest
address) of the kernel stack, eg:

 kstack               = 0xc0000000f1a7be30      (0x258)
 kstack_base          = 0xc0000000f1a78000

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Andrew Donnellan
deed2ec5a7 powerpc/configs: Enable I2C_CHARDEV for pseries and powernv
i2c-dev provides an interface for userspace programs to interact with I2C
devices, and is very helpful for I2C-related debugging.

Enable it in pseries_defconfig and powernv_defconfig. It's already enabled
in many other powerpc defconfigs.

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Michael Ellerman
6773027205 powerpc/mm/radix: Drop unneeded NULL check
We call these functions with non-NULL mm or vma. Hence we can skip the
NULL check in these functions. We also remove now unused function
__local_flush_hugetlb_page().

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Drop the checks with is_vm_hugetlb_page() as noticed by Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Breno Leitao
402e172a2c powerpc/xmon: Check before calling xive functions
Currently xmon could call XIVE functions from OPAL even if the XIVE is
disabled or does not exist in the system, as in POWER8 machines. This
causes the following exception:

 1:mon> dx
 cpu 0x1: Vector: 700 (Program Check) at [c000000423c93450]
     pc: c00000000009cfa4: opal_xive_dump+0x50/0x68
     lr: c0000000000997b8: opal_return+0x0/0x50

This patch simply checks if XIVE is enabled before calling XIVE
functions.

Fixes: 243e25112d ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Suggested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Vaibhav Jain
1cafc62940 cxl: Provide debugfs access to PSL_DEBUG/XSL_DEBUG registers
Access to PSL/XSL_DEBUG registers on the adapter provides easy access
to the debug facilities provided by PSL/XSL. So this patch adds two
new files (debug, xsl-debug) to the cxl-adapter specific debugfs
folder located at /sys/kernel/debugfs/cxl/card<n>, which will provide
direct r/w access to corrosponding debug registers in the adapter
config-space.

Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22 12:08:31 +02:00
Bjorn Andersson
d1de6d6c63 soc: qcom: Remote filesystem memory driver
The Qualcomm remote file system protocol is used by certain remoteprocs,
in particular the modem, to read and write persistent storage in
platforms where only the application CPU has physical storage access.

The protocol is based on a set of QMI-encoded control-messages and a
shared memory buffer for exchaning the data. This driver implements the
latter, providing the user space service access to the carved out chunk
of memory.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-22 05:06:34 -05:00
Bjorn Andersson
2501ec1404 dt-binding: soc: qcom: Add binding for rmtfs memory
This adds the binding for describing shared memory used to exchange file
system blocks between the RMTFS client and service. A client for this is
generally found in the modem firmware and is used for accessing
persistent storage for things such as radio calibration.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-22 05:06:34 -05:00
Bjorn Andersson
eb297bc716 of: reserved_mem: Accessor for acquiring reserved_mem
In some cases drivers referencing a reserved-memory region might want to
remap the entire region, but when defining the reserved-memory by "size"
the client driver has no means to know the associated base address of
the reserved memory region.

This patch adds an accessor for such drivers to acquire a handle to
their associated reserved-memory for this purpose.

A complicating factor for the implementation is that the reserved_mem
objects are created from the flattened DeviceTree, as such we can't
use the device_node address for comparison. Fortunately the name of the
node will be used as "name" of the reserved_mem and will be used when
building the full_name, so we can compare the "name" with the basename
of the full_name to find the match.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-22 05:06:33 -05:00
Bjorn Andersson
a50ff19d06 of/platform: Generalize /reserved-memory handling
By iterating over all /reserved-memory child nodes and match each one to
a list of compatibles that we want to treat specially, we can easily
extend the list of compatibles to handle - without having to resort to
of_platform_populate() that would create unnecessary platform_devices.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-22 05:06:33 -05:00
Linus Torvalds
b5ac3beb5a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "A little more than usual this time around. Been travelling, so that is
  part of it.

  Anyways, here are the highlights:

   1) Deal with memcontrol races wrt. listener dismantle, from Eric
      Dumazet.

   2) Handle page allocation failures properly in nfp driver, from Jaku
      Kicinski.

   3) Fix memory leaks in macsec, from Sabrina Dubroca.

   4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault.

   5) Several fixes in bnxt_en driver, including preventing potential
      NVRAM parameter corruption from Michael Chan.

   6) Fix for KRACK attacks in wireless, from Johannes Berg.

   7) rtnetlink event generation fixes from Xin Long.

   8) Deadlock in mlxsw driver, from Ido Schimmel.

   9) Disallow arithmetic operations on context pointers in bpf, from
      Jakub Kicinski.

  10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from
      Xin Long.

  11) Only TCP is supported for sockmap, make that explicit with a
      check, from John Fastabend.

  12) Fix IP options state races in DCCP and TCP, from Eric Dumazet.

  13) Fix panic in packet_getsockopt(), also from Eric Dumazet.

  14) Add missing locked in hv_sock layer, from Dexuan Cui.

  15) Various aquantia bug fixes, including several statistics handling
      cures. From Igor Russkikh et al.

  16) Fix arithmetic overflow in devmap code, from John Fastabend.

  17) Fix busted socket memory accounting when we get a fault in the tcp
      zero copy paths. From Willem de Bruijn.

  18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
  stmmac: Don't access tx_q->dirty_tx before netif_tx_lock
  ipv6: flowlabel: do not leave opt->tot_len with garbage
  of_mdio: Fix broken PHY IRQ in case of probe deferral
  textsearch: fix typos in library helpers
  rxrpc: Don't release call mutex on error pointer
  net: stmmac: Prevent infinite loop in get_rx_timestamp_status()
  net: stmmac: Fix stmmac_get_rx_hwtstamp()
  net: stmmac: Add missing call to dev_kfree_skb()
  mlxsw: spectrum_router: Configure TIGCR on init
  mlxsw: reg: Add Tunneling IPinIP General Configuration Register
  net: ethtool: remove error check for legacy setting transceiver type
  soreuseport: fix initialization race
  net: bridge: fix returning of vlan range op errors
  sock: correct sk_wmem_queued accounting on efault in tcp zerocopy
  bpf: add test cases to bpf selftests to cover all access tests
  bpf: fix pattern matches for direct packet access
  bpf: fix off by one for range markings with L{T, E} patterns
  bpf: devmap fix arithmetic overflow in bitmap_size calculation
  net: aquantia: Bad udp rate on default interrupt coalescing
  net: aquantia: Enable coalescing management via ethtool interface
  ...
2017-10-21 22:44:48 -04:00
Bernd Edlinger
8d5f4b0717 stmmac: Don't access tx_q->dirty_tx before netif_tx_lock
This is the possible reason for different hard to reproduce
problems on my ARMv7-SMP test system.

The symptoms are in recent kernels imprecise external aborts,
and in older kernels various kinds of network stalls and
unexpected page allocation failures.

My testing indicates that the trouble started between v4.5 and v4.6
and prevails up to v4.14.

Using the dirty_tx before acquiring the spin lock is clearly
wrong and was first introduced with v4.6.

Fixes: e3ad57c967 ("stmmac: review RX/TX ring management")

Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:24:43 +01:00
Eric Dumazet
864e2a1f8a ipv6: flowlabel: do not leave opt->tot_len with garbage
When syzkaller team brought us a C repro for the crash [1] that
had been reported many times in the past, I finally could find
the root cause.

If FlowLabel info is merged by fl6_merge_options(), we leave
part of the opt_space storage provided by udp/raw/l2tp with random value
in opt_space.tot_len, unless a control message was provided at sendmsg()
time.

Then ip6_setup_cork() would use this random value to perform a kzalloc()
call. Undefined behavior and crashes.

Fix is to properly set tot_len in fl6_merge_options()

At the same time, we can also avoid consuming memory and cpu cycles
to clear it, if every option is copied via a kmemdup(). This is the
change in ip6_setup_cork().

[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801cb64a100 task.stack: ffff8801cc350000
RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168
RSP: 0018:ffff8801cc357550 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010
RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014
RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10
R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0
R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0
FS:  00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0
DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729
 udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340
 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 SYSC_sendto+0x358/0x5a0 net/socket.c:1750
 SyS_sendto+0x40/0x50 net/socket.c:1718
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4520a9
RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9
RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016
RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee
R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029
Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:22:24 +01:00
Geert Uytterhoeven
66bdede495 of_mdio: Fix broken PHY IRQ in case of probe deferral
If an Ethernet PHY is initialized before the interrupt controller it is
connected to, a message like the following is printed:

    irq: no irq domain found for /interrupt-controller@e61c0000 !

However, the actual error is ignored, leading to a non-functional (POLL)
PHY interrupt later:

    Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL)

Depending on whether the PHY driver will fall back to polling, Ethernet
may or may not work.

To fix this:
  1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to
     of_irq_get().
     Unlike the former, the latter returns -EPROBE_DEFER if the
     interrupt controller is not yet available, so this condition can be
     detected.
     Other errors are handled the same as before, i.e. use the passed
     mdio->irq[addr] as interrupt.
  2. Propagate and handle errors from of_mdiobus_register_phy() and
     of_mdiobus_register_device().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:20:25 +01:00
Randy Dunlap
7433a8d6fa textsearch: fix typos in library helpers
Fix spellos (typos) in textsearch library helpers.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:14:07 +01:00
David S. Miller
bdd091bab8 Merge branch 'tun-timer-cleanups'
Eric Dumazet says:

====================
tun: timer cleanups

While working on a syzkaller issue that might have been
fixed already by Cong Wang in commit 0ad646c81b
("tun: call dev_get_valid_name() before register_netdevice()")
I made three small changes related to flow_gc_timer.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:13:20 +01:00
Eric Dumazet
ee74d9967b tun: do not arm flow_gc_timer in tun_flow_init()
Timer is properly armed on demand from tun_flow_update(),
so there is no need to arm it at tun init.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:13:19 +01:00
Eric Dumazet
81d98fa4df tun: avoid extra timer schedule in tun_flow_cleanup()
If tun_flow_cleanup() deleted all flows, no need to
arm the timer again. It will be armed next time
tun_flow_update() is called.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:13:19 +01:00
Eric Dumazet
7dbfb4ef77 tun: do not block BH again in tun_flow_cleanup()
tun_flow_cleanup() being a timer callback, it is already
running in BH context.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:13:19 +01:00
David S. Miller
02db34d04e Merge branch 'bpf-BASE_RTT'
Lawrence Brakmo says:

====================
bpf: add support for BASE_RTT

This patch set adds the following functionality to socket_ops BPF
programs.
1) Add bpf helper function bpf_getsocketops. Currently only supports
   TCP_CONGESTION
2) Add BPF_SOCKET_OPS_BASE_RTT op to get the base RTT of the
   connection. In general, the base RTT indicates the threshold such
   that RTTs above it indicate congestion. More details in the
   relevant patches.

Consists of the following patches:

[PATCH net-next 1/5] bpf: add support for BPF_SOCK_OPS_BASE_RTT
[PATCH net-next 2/5] bpf: Adding helper function bpf_getsockops
[PATCH net-next 3/5] bpf: Add BPF_SOCKET_OPS_BASE_RTT support to
[PATCH net-next 4/5] bpf: sample BPF_SOCKET_OPS_BASE_RTT program
[PATCH net-next 5/5] bpf: create samples/bpf/tcp_bpf.readme
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:12:06 +01:00
Lawrence Brakmo
bfdf756938 bpf: create samples/bpf/tcp_bpf.readme
Readme file explaining how to create a cgroupv2 and attach one
of the tcp_*_kern.o socket_ops BPF program.

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked_by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:12:05 +01:00
Lawrence Brakmo
c890063e44 bpf: sample BPF_SOCKET_OPS_BASE_RTT program
Sample socket_ops BPF program to test the BPF helper function
bpf_getsocketops and the new socket_ops op BPF_SOCKET_OPS_BASE_RTT.

The program provides a base RTT of 80us when the calling flow is
within a DC (as determined by the IPV6 prefix) and the congestion
algorithm is "nv".

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked_by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:12:05 +01:00
Lawrence Brakmo
85cce21578 bpf: Add BPF_SOCKET_OPS_BASE_RTT support to tcp_nv
TCP_NV will try to get the base RTT from a socket_ops BPF program if one
is loaded. NV will then use the base RTT to bound its min RTT (its
notion of the base RTT). It uses the base RTT as an upper bound and 80%
of the base RTT as its lower bound.

In other words, NV will consider filtered RTTs larger than base RTT as a
sign of congestion. As a result, there is no minRTT inflation when there
is a lot of congestion. For example, in a DC where the RTTs are less
than 40us when there is no congestion, a base RTT value of 80us improves
the performance of NV. The difference between the uncongested RTT and
the base RTT provided represents how much queueing we are willing to
have (in practice it can be higher).

NV has been tunned to reduce congestion when there are many flows at the
cost of one flow not achieving full bandwith utilization. When a
reasonable base RTT is provided, one NV flow can now fully utilize the
full bandwidth. In addition, the performance is also improved when there
are many flows.

In the following examples the NV results are using a kernel with this
patch set (i.e. both NV results are using the new nv_loss_dec_factor).

With one host sending to another host and only one flow the
goodputs are:
  Cubic: 9.3 Gbps, NV: 5.5 Gbps, NV (baseRTT=80us): 9.2 Gbps

With 2 hosts sending to one host (1 flow per host, the goodput per flow
is:
  Cubic: 4.6 Gbps, NV: 4.5 Gbps, NV (baseRTT=80us)L 4.6 Gbps

But the RTTs seen by a ping process in the sender is:
  Cubic: 3.3ms  NV: 97us,  NV (baseRTT=80us): 146us

With a lot of flows things look even better for NV with baseRTT. Here we
have 3 hosts sending to one host. Each sending host has 6 flows: 1
stream, 4x1MB RPC, 1x10KB RPC. Cubic, NV and NV with baseRTT all fully
utilize the full available bandwidth. However, the distribution of
bandwidth among the flows is very different. For the 10KB RPC flow:
  Cubic: 27Mbps, NV: 111Mbps, NV (baseRTT=80us): 222Mbps

The 99% latencies for the 10KB flows are:
  Cubic: 26ms,  NV: 1ms,  NV (baseRTT=80us): 500us

The RTT seen by a ping process at the senders:
  Cubic: 3.2ms  NV: 720us,  NV (baseRTT=80us): 330us

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:12:05 +01:00
Lawrence Brakmo
cd86d1fd21 bpf: Adding helper function bpf_getsockops
Adding support for helper function bpf_getsockops to socket_ops BPF
programs. This patch only supports TCP_CONGESTION.

Signed-off-by: Vlad Vysotsky <vlad@cs.ucla.edu>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:12:05 +01:00