Commit graph

932,869 commits

Author SHA1 Message Date
Ville Syrjälä
d0d3725468 drm/i915: Use intel_get_pipe_timings() and intel_mode_from_pipe_config() in intel_crtc_mode_get()
Eliminate the duplicate code for pipe timing readout in
intel_crtc_mode_get() by using the functions we use for the normal state
readout.

v2: Store dotclock in adjusted_mode instead of the final mode

Cc: dri-devel@lists.freedesktop.org
Cc: Rob Kramer <rob@solution-space.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1459536530-17754-1-git-send-email-ville.syrjala@linux.intel.com
2017-10-09 17:48:08 +03:00
Ville Syrjälä
e30a154b52 drm/i915: Read timings from the correct transcoder in intel_crtc_mode_get()
intel_crtc->config->cpu_transcoder isn't yet filled out when
intel_crtc_mode_get() gets called during output probing, so we should
not use it there. Instead intel_crtc_mode_get() figures out the correct
transcoder on its own, and that's what we should use.

If the BIOS boots LVDS on pipe B, intel_crtc_mode_get() would actually
end up reading the timings from pipe A instead (since PIPE_A==0),
which clearly isn't what we want.

It looks to me like this may have been broken by
commit eccb140bca ("drm/i915: hw state readout&check support for cpu_transcoder")
as that one removed the early initialization of cpu_transcoder from
intel_crtc_init().

Cc: stable@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Kramer <rob@solution-space.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Rob Kramer <rob@solution-space.com>
Fixes: eccb140bca ("drm/i915: hw state readout&check support for cpu_transcoder")
References: https://lists.freedesktop.org/archives/dri-devel/2016-April/104142.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1459525046-19425-1-git-send-email-ville.syrjala@linux.intel.com
2017-10-09 17:45:35 +03:00
Ding Tianhong
5e0fac63a6 net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
The ixgbe driver use the compile check to determine if it can
send TLPs to Root Port with the Relaxed Ordering Attribute set,
this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING
has been added to the kernel and we could check the bit4 in the PCIe
Device Control register to determine whether we should use the Relaxed
Ordering Attributes or not, so use this new way in the ixgbe driver.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09 07:43:06 -07:00
Ding Tianhong
f4986d250a Revert commit 1a8b6d76dc ("net:add one common config...")
The new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added
to indicate that Relaxed Ordering Attributes (RO) should not
be used for Transaction Layer Packets (TLP) targeted toward
these affected Root Port, it will clear the bit4 in the PCIe
Device Control register, so the PCIe device drivers could
query PCIe configuration space to determine if it can send
TLPs to Root Port with the Relaxed Ordering Attributes set.

With this new flag  we don't need the config ARCH_WANT_RELAX_ORDER
to control the Relaxed Ordering Attributes for the ixgbe drivers
just like the commit 1a8b6d76dc ("net:add one common config...") did,
so revert this commit.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09 07:43:06 -07:00
Sabrina Dubroca
a39221ce96 ixgbe: fix masking of bits read from IXGBE_VXLANCTRL register
In ixgbe_clear_udp_tunnel_port(), we read the IXGBE_VXLANCTRL register
and then try to mask some bits out of the value, using the logical
instead of bitwise and operator.

Fixes: a21d0822ff ("ixgbe: add support for geneve Rx offload")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09 07:43:06 -07:00
Mark D Rustad
e0f06bba96 ixgbe: Return error when getting PHY address if PHY access is not supported
In cases where PHY register access is not supported, don't mislead
a caller into thinking that it is supported by returning a PHY
address. Instead, return -EOPNOTSUPP when PHY access is not
supported.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09 07:43:06 -07:00
Paul Burton
ca8eb05b5f MIPS: math-emu: Remove pr_err() calls from fpu_emu()
The FPU emulator includes 2 calls to pr_err() which are triggered by
invalid instruction encodings for MIPSr6 cmp.cond.fmt instructions.
These cases are not kernel errors, merely invalid instructions which are
already handled by delivering a SIGILL which will provide notification
that something failed in cases where that makes sense.

In cases where that SIGILL is somewhat expected & being handled, for
example when crashme happens to generate one of the affected bad
encodings, the message is printed with no useful context about what
triggered it & spams the kernel log for no good reason.

Remove the pr_err() calls to make crashme run silently & treat the bad
encodings the same way we do others, with a SIGILL & no further kernel
log output.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: f8c3c6717a ("MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction")
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v4.3+
Patchwork: https://patchwork.linux-mips.org/patch/17253/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 16:33:34 +02:00
Paul Burton
e1270575fb MIPS: Fix generic-board-config.sh for builds using O=
When configuring the kernel using one of the generic MIPS defconfig
targets, the generic-board-config.sh script is used to check
requirements listed in board config fragments against a reference config
in order to determine which board config fragments to merge into the
final config.

When specifying O= to configure in a directory other than the kernel
source directory, this generic-board-config.sh script is invoked in the
directory that we are configuring in (ie. the directory that O equals),
and the path to the reference config is relative to the current
directory. The script then changes the current directory to the source
tree, which unfortunately breaks later access to the reference file
since its path is relative to a directory that is no longer the current
working directory. This results in configuration failing with errors
such as:

  $ make ARCH=mips O=tmp 32r2_defconfig
  make[1]: Entering directory '/home/pburton/src/linux/tmp'
  Using ../arch/mips/configs/generic_defconfig as base
  Merging ../arch/mips/configs/generic/32r2.config
  Merging ../arch/mips/configs/generic/eb.config
  grep: ./.config.32r2_defconfig: No such file or directory
  grep: ./.config.32r2_defconfig: No such file or directory
  The base file '.config' does not exist.  Exit.
  make[1]: *** [arch/mips/Makefile:505: 32r2_defconfig] Error 1
  make[1]: Leaving directory '/home/pburton/src/linux-ingenic/tmp'
  make: *** [Makefile:145: sub-make] Error 2

Fix this by avoiding changing the working directory in
generic-board-config.sh, instead using full paths to files under
$(srctree)/ where necessary.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 27e0d4b051 ("MIPS: generic: Allow filtering enabled boards by requirements")
Cc: linux-mips@linux-mips.org
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: kbuild-all@01.org
Patchwork: https://patchwork.linux-mips.org/patch/17231/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 16:32:34 +02:00
Alexandre Belloni
adea291718 ARM: dts: at91: usb_a9g20: fix rtc node
The rv3029 compatible is missing its vendor string, add it.
Also fix the node name to be a proper generic name.

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-09 16:32:20 +02:00
Romain Izard
9b50e1abcc ARM: dts: at91: sama5d2 Xplained: Describe the SD card power supply
As the SAMA5D2 SDHCI controller works with an external power supply,
describe the power supply for the SD card slot. This makes it possible
to use mmc power sequences, in the case of external SDIO modules.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-09 16:32:20 +02:00
Wenyou Yang
ff7b582a94 ARM: dts: at91: sama5d2_xplained: Add charger node
Add the charger device node as a sub-device of act8945a mfd, move
the charger's properties in the node, and replace the
"active-semi,irq_gpios" with the "interrupts" property to denote
the act8945a charger's irq.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-09 16:32:19 +02:00
Kalle Valo
a6127b4440 Second set of iwlwifi fixes for 4.14
* Fix support for 3168 device series;
 * Fix a potential crash when using FW debugging recording;
 * Improve channel flags parsing to avoid warnings on too long traces;
 * Return -ENODATA when the temperature is not available, since the
   -EIO we were returning was causing fatal errors in userspace;
 * Avoid printing too many messages in dmesg when using monitor mode,
   since this can become very noisy and completely flood the logs;
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAlnXYzEACgkQoUecoho8
 xfqQsg//f5tpf0pqtpKVIwXH+uapsbbKmFswfpjNLg3Yk8xbaIL9RNvaNge/J/G2
 wdJ8mD6dweKUVj+XelzFA9LS5yjOWzckQJ3Ovp8QVXz5h4/Y6oXedOArRISvti0p
 Z5w/WWA8ru8OgLYkrRsHOmHvKIrZJnb15v7S7X+MrtDpxQ18OLksdIptne90Geng
 ocTUIIRCU8TM8b/+kTVxiICQv4YqNU/LN9IMxT7IQ7MKplpcwPGxVE+zE/a8MrC3
 Skhb98J2ATC5dEIQ1kUhugDP3kZ7zrTFNwGlsmcisHbmN6zI0dfcvPm0elHaY2+0
 QGMrl8mJ3tgmSWwT4uhaJ3GDgQVzSV8tY2zrv95C57/CVJ5mgh5GY57capxWRa8K
 YgyTNZNld57R8kLMSHOIL22V+lVJpVW6/Cnt2063mBYn3CdsBoTH+Bo75QTBWkUz
 13IxWYD4UyAf3F8quXOXsHKqsySsRAIDaMeA7cKga1vM+/yMkM/waKhOvysBj+ie
 BnU0poRAixdpGs0E0JJmKZOpDV7b8D7/AlRY3PEEvpOTrxaj9uynXgC6jhseP52E
 dUwfDaZw12iDM+dAxS/0yTNGZzTj1MULFuOPchUrEp19gN51aO4aUAt38d3g5sU+
 XJZQkgKnHpxUOsaQd8L4E2b5Wv6PZWtG3Qqc8+5SCh2eZpgpuY4=
 =0jVu
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-for-kalle-2017-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes

Second set of iwlwifi fixes for 4.14

* Fix support for 3168 device series;
* Fix a potential crash when using FW debugging recording;
* Improve channel flags parsing to avoid warnings on too long traces;
* Return -ENODATA when the temperature is not available, since the
  -EIO we were returning was causing fatal errors in userspace;
* Avoid printing too many messages in dmesg when using monitor mode,
  since this can become very noisy and completely flood the logs;
2017-10-09 17:31:39 +03:00
Paul Burton
133d68e0ed MIPS: Fix cmpxchg on 32b signed ints for 64b kernel with !kernel_uses_llsc
Commit 8263db4d77 ("MIPS: cmpxchg: Implement __cmpxchg() as a
function") refactored our implementation of __cmpxchg() to be a function
rather than a macro, with the aim of making it easier to read & modify.
Unfortunately the commit breaks use of cmpxchg() for signed 32 bit
values when we have a 64 bit kernel with kernel_uses_llsc == false,
because:

 - In cmpxchg_local() we cast the old value to the type the pointer
   points to, and then to an unsigned long. If the pointer points to a
   signed type smaller than 64 bits then the old value will be sign
   extended to 64 bits. That is, bits beyond the size of the pointed to
   type will be set to 1 if the old value is negative. In the case of a
   signed 32 bit integer with a negative value, bits 63:32 will all be
   set.

 - In __cmpxchg_asm() we load the value from memory, ie. dereference the
   pointer, and store the value as an unsigned integer (__ret) whose
   size matches the pointer. For a 32 bit cmpxchg() this means we store
   the value in a u32, because the pointer provided to __cmpxchg_asm()
   by __cmpxchg() is of type volatile u32 *.

 - __cmpxchg_asm() then checks whether the value in memory (__ret)
   matches the provided old value, by comparing the two values. This
   results in the u32 being promoted to a 64 bit unsigned long to match
   the old argument - however because both types are unsigned the value
   is zero extended, which does not match the sign extension performed
   on the old value in cmpxchg_local() earlier.

This mismatch means that unfortunate cmpxchg() calls can incorrectly
fail for 64 bit kernels with kernel_uses_llsc == false. This is the case
on at least non-SMP Cavium Octeon kernels, which hardcode
kernel_uses_llsc in their cpu-feature-overrides.h header. Using a
v4.13-rc7 kernel configured using cavium_octeon_defconfig with SMP
manually disabled, this presents itself as oddity when we reach
userland - for example:

  can't run '/bin/mount': Text file busy
  can't run '/bin/mkdir': Text file busy
  can't run '/bin/mkdir': Text file busy
  can't run '/bin/mount': Text file busy
  can't run '/bin/hostname': Text file busy
  can't run '/etc/init.d/rcS': Text file busy
  can't run '/sbin/getty': Text file busy
  can't run '/sbin/getty': Text file busy

It appears that some part of the init process, which is in this case
buildroot's busybox init, is running successfully. It never manages to
reach the login prompt though, and complains about /sbin/getty being
busy repeatedly and indefinitely.

Fix this by casting the old value provided to __cmpxchg_asm() to an
appropriately sized unsigned integer, such that we consistently
zero-extend avoiding the mismatch. The __cmpxchg_small() case for 8 & 16
bit values is unaffected because __cmpxchg_small() already masks
provided values appropriately.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 8263db4d77 ("MIPS: cmpxchg: Implement __cmpxchg() as a function")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17226/
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 16:31:32 +02:00
Himanshu Jha
09aa97c78a skd: Use kmem_cache_free
Use kmem_cache_free instead of kfree for freeing the memory previously
allocated with kmem_cache_zalloc/kmem_cache_alloc/kmem_cache_node.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-09 08:31:27 -06:00
David Teigland
9250e52359 dlm: remove dlm_send_rcom_lookup_dump
This function was only for debugging.  It would be
called in a condition that should not happen, and
should probably have been removed from the final
version of the original commit.

Remove it because it does mutex lock under spin lock.

Signed-off-by: David Teigland <teigland@redhat.com>
2017-10-09 09:29:31 -05:00
Luca Miccio
b5dc5d4d1f block,bfq: Disable writeback throttling
Similarly to CFQ, BFQ has its write-throttling heuristics, and it
is better not to combine them with further write-throttling
heuristics of a different nature.
So this commit disables write-back throttling for a device if BFQ
is used as I/O scheduler for that device.

Signed-off-by: Luca Miccio <lucmiccio@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-09 08:29:21 -06:00
Masahiro Yamada
37131ec4f9 kbuild: mkcompile_h: do not create .version
This script does not need to create .version; it will be created by
scripts/link-vmlinux.sh later.  Clean-up the code slightly.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-09 23:28:46 +09:00
Masahiro Yamada
278ae60403 kbuild: link-vmlinux.sh: simplify .version increment
Since commit 1f2bfbd00e ("kbuild: link of vmlinux moved to a
script"), it is easy to increment .version without using a temporary
file .old_version.

I do not see anybody who creates the .tmp_version.  Probably it is a
left-over of commit 4e25d8bb95 ("[PATCH] kbuild: adjust .version
updating").  Just remove it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-09 23:28:46 +09:00
Masahiro Yamada
f231e43333 hexagon: get rid of #include <generated/compile.h>
<generated/compile.h> is created (or updated) when Kbuild descends
into the init/ directory.  In parallel building from a pristine
source tree, there is no guarantee <generated/compile.h> exists when
arch/hexagon/kernel/ptrace.c is compiled.

For hexagon architecture, we know UTS_MACHINE is a fixed string
"hexagon", so let's hard-code it, like many architectures do.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Richard Kuo <rkuo@codeaurora.org>
2017-10-09 23:28:45 +09:00
Yafang Shao
94af584692 writeback: schedule periodic writeback with sysctl
After disable periodic writeback by writing 0 to
dirty_writeback_centisecs, the handler wb_workfn() will not be
entered again until the dirty background limit reaches or
sync syscall is executed or no enough free memory available or
vmscan is triggered.

So the periodic writeback can't be enabled by writing a non-zero
value to dirty_writeback_centisecs.
As it can be disabled by sysctl, it should be able to enable by
sysctl as well.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-09 08:27:40 -06:00
Takashi Iwai
c95072b3d8 ALSA: line6: Fix leftover URB at error-path during probe
While line6_probe() may kick off URB for a control MIDI endpoint, the
function doesn't clean up it properly at its error path.  This results
in a leftover URB action that is eventually triggered later and causes
an Oops like:
  general protection fault: 0000 [#1] PREEMPT SMP KASAN
  CPU: 1 PID: 0 Comm: swapper/1 Not tainted
  RIP: 0010:usb_fill_bulk_urb ./include/linux/usb.h:1619
  RIP: 0010:line6_start_listen+0x3fe/0x9e0 sound/usb/line6/driver.c:76
  Call Trace:
   <IRQ>
   line6_data_received+0x1f7/0x470 sound/usb/line6/driver.c:326
   __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779
   usb_hcd_giveback_urb+0x337/0x420 drivers/usb/core/hcd.c:1845
   dummy_timer+0xba9/0x39f0 drivers/usb/gadget/udc/dummy_hcd.c:1965
   call_timer_fn+0x2a2/0x940 kernel/time/timer.c:1281
   ....

Since the whole clean-up procedure is done in line6_disconnect()
callback, we can simply call it in the error path instead of
open-coding the whole again.  It'll fix such an issue automagically.

The bug was spotted by syzkaller.

Fixes: eedd0e95d3 ("ALSA: line6: Don't forget to call driver's destructor at error path")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09 16:17:18 +02:00
Takashi Iwai
54a4b2b458 ALSA: line6: Fix NULL dereference at podhd_disconnect()
When podhd_init() failed with the acquiring a ctrl i/f, the line6
helper still calls the disconnect callback that eventually calls again
usb_driver_release_interface() with the NULL intf.

Put the proper NULL check before calling it for avoiding an Oops.

Fixes: fc90172ba2 ("ALSA: line6: Claim pod x3 usb data interface")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09 16:17:09 +02:00
Takashi Iwai
cb02ffc76a ALSA: line6: Fix missing initialization before error path
The error path in podhd_init() tries to clear the pending timer, while
the timer object is initialized at the end of init sequence, thus it
may hit the uninitialized object, as spotted by syzkaller:

  INFO: trying to register non-static key.
  the code is fine but needs lockdep annotation.
  turning off the locking correctness validator.
  CPU: 1 PID: 1845 Comm: kworker/1:2 Not tainted
  4.14.0-rc2-42613-g1488251d1a98 #238
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Workqueue: usb_hub_wq hub_event
  Call Trace:
   __dump_stack lib/dump_stack.c:16
   dump_stack+0x292/0x395 lib/dump_stack.c:52
   register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
   __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
   lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
   del_timer_sync+0x12c/0x280 kernel/time/timer.c:1237
   podhd_disconnect+0x8c/0x160 sound/usb/line6/podhd.c:299
   line6_probe+0x844/0x1310 sound/usb/line6/driver.c:783
   podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474
   ....

For addressing it, assure the initializations of timer and work by
moving them to the beginning of podhd_init().

Fixes: 790869dacc ("ALSA: line6: Add support for POD X3")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09 16:16:51 +02:00
Eugen Hristev
27d90f46f2 ARM: dts: at91: sama5d2: add ADC hw trigger edge type
Added ADTRG edge type property as interrupt edge type value

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-10-09 15:34:22 +02:00
Eugen Hristev
84c70b2395 ARM: dts: at91: sama5d2_xplained: enable ADTRG pin
Enable pinctrl for ADTRG pin (PD31) for ADC hardware trigger support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-10-09 15:33:53 +02:00
Shmulik Ladkani
98589a0998 netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'
Commit 2c16d60332 ("netfilter: xt_bpf: support ebpf") introduced
support for attaching an eBPF object by an fd, with the
'bpf_mt_check_v1' ABI expecting the '.fd' to be specified upon each
IPT_SO_SET_REPLACE call.

However this breaks subsequent iptables calls:

 # iptables -A INPUT -m bpf --object-pinned /sys/fs/bpf/xxx -j ACCEPT
 # iptables -A INPUT -s 5.6.7.8 -j ACCEPT
 iptables: Invalid argument. Run `dmesg' for more information.

That's because iptables works by loading existing rules using
IPT_SO_GET_ENTRIES to userspace, then issuing IPT_SO_SET_REPLACE with
the replacement set.

However, the loaded 'xt_bpf_info_v1' has an arbitrary '.fd' number
(from the initial "iptables -m bpf" invocation) - so when 2nd invocation
occurs, userspace passes a bogus fd number, which leads to
'bpf_mt_check_v1' to fail.

One suggested solution [1] was to hack iptables userspace, to perform a
"entries fixup" immediatley after IPT_SO_GET_ENTRIES, by opening a new,
process-local fd per every 'xt_bpf_info_v1' entry seen.

However, in [2] both Pablo Neira Ayuso and Willem de Bruijn suggested to
depricate the xt_bpf_info_v1 ABI dealing with pinned ebpf objects.

This fix changes the XT_BPF_MODE_FD_PINNED behavior to ignore the given
'.fd' and instead perform an in-kernel lookup for the bpf object given
the provided '.path'.

It also defines an alias for the XT_BPF_MODE_FD_PINNED mode, named
XT_BPF_MODE_PATH_PINNED, to better reflect the fact that the user is
expected to provide the path of the pinned object.

Existing XT_BPF_MODE_FD_ELF behavior (non-pinned fd mode) is preserved.

References: [1] https://marc.info/?l=netfilter-devel&m=150564724607440&w=2
            [2] https://marc.info/?l=netfilter-devel&m=150575727129880&w=2

Reported-by: Rafael Buchbinder <rafi@rbk.ms>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-09 15:18:04 +02:00
Colin Ian King
4831ca9e4a IB/rxe: check for allocation failure on elem
The allocation for elem may fail (especially because we're using
GFP_ATOMIC) so best to check for a null return.  This fixes a potential
null pointer dereference when assigning elem->pool.

Detected by CoverityScan CID#1357507 ("Dereference null return value")

Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-09 09:03:16 -04:00
Mathieu Malaterre
239e14d195 MIPS: jz4780: DTS: Probe the jz4740-watchdog driver from devicetree
The jz4740-watchdog driver supports both jz4740 & jz4780.

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17291/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 14:53:57 +02:00
Mathieu Malaterre
e7af4d14e2 MIPS: Ci20: Enable watchdog driver
Update the Ci20's defconfig to enable the JZ4740's watchdog driver.

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17290/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 14:53:57 +02:00
Steven J. Hill
ac4f59f88a MIPS: Remove unused variable 'lastpfn'
'lastpfn' is never used for anything. Remove it.

Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17276/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 14:53:57 +02:00
Chad Reese
34ae9c915f MIPS: Add nudges to writes for bit unlocks.
Flushing the writes lets other CPUs waiting for the lock to get it sooner.

Signed-off-by: Chad Reese <kreese@caviumnetworks.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17289/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 14:53:56 +02:00
Tobias Klauser
508c5757a7 MIPS: make thread_saved_pc static
The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d55977 ("sched/core: Remove pointless printout in
sched_show_task()"), so it no longer needs to be globally defined for
MIPS and can be made static.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17303/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 14:53:56 +02:00
Harvey Hunt
7fd60db5b3 MIPS: Ci20: Add support for rootfs on NFS to defconfig
Now that ethernet support is in the kernel, add the option to use a
rootfs over NFS to enable automated testing of upstream kernels on a
Ci20.

Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17314/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 14:53:56 +02:00
Thomas Meyer
7a8e4158bf MIPS: Cocci spatch "vma_pages"
Use vma_pages function on vma object instead of explicit computation.
Found by coccinelle spatch "api/vma_pages.cocci"

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17333/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 14:53:56 +02:00
Kelvin Cheung
1b6ad6df8b MIPS: loongson1: set default number of rx and tx queues for stmmac
Set the default number of RX and TX queues due to
the recent changes of stmmac driver.
Otherwise the ethernet will crash once it starts.

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17452/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 14:53:38 +02:00
Matt Redfearn
94c3390ab8 MIPS: bpf: Fix uninitialised target compiler error
Compiling ebpf_jit.c with gcc 4.9 results in a (likely spurious)
compiler warning, as gcc has detected that the variable "target" may be
used uninitialised. Since -Werror is active, this is treated as an error
and causes a kernel build failure whenever CONFIG_MIPS_EBPF_JIT is
enabled.

arch/mips/net/ebpf_jit.c: In function 'build_one_insn':
arch/mips/net/ebpf_jit.c:1118:80: error: 'target' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
    emit_instr(ctx, j, target);
                                                                                ^
cc1: all warnings being treated as errors

Fix this by initialising "target" to 0. If it really is used
uninitialised this would result in a jump to 0 and a detectable run time
failure.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Fixes: b6bd53f9c4 ("MIPS: Add missing file for eBPF JIT.")
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.13+
Patchwork: https://patchwork.linux-mips.org/patch/17375/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 14:53:38 +02:00
Jeffy Chen
7827912725 drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume()
Kmemleak reported memory leak after suspend and resume:
unreferenced object 0xffffffc0e31d8880 (size 128):
  comm "bash", pid 181, jiffies 4294763583 (age 24.694s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 20 a2 eb c0 ff ff ff  ......... ......
    01 00 00 00 00 00 00 00 80 87 1d e3 c0 ff ff ff  ................
  backtrace:
    [<ffffffc00034bb64>] __save_stack_trace+0x48/0x6c
    [<ffffffc00034c244>] create_object+0x138/0x254
    [<ffffffc0009dd218>] kmemleak_alloc+0x58/0x8c
    [<ffffffc000346de4>] kmem_cache_alloc_trace+0x188/0x254
    [<ffffffc0005af4c0>] drm_atomic_state_alloc+0x3c/0x88
    [<ffffffc000591f0c>] drm_atomic_helper_duplicate_state+0x28/0x158
    [<ffffffc000592098>] drm_atomic_helper_suspend+0x5c/0xf0

Problem here is that we are duplicating the drm_atomic_state in
drm_atomic_helper_suspend(), but not unreference it in the resume path.

Fixes: 1494276000 ("drm/atomic-helper: Implement subsystem-level suspend/resume")
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009064641.15174-1-jeffy.chen@rock-chips.com
Fixes: 0853695c3b ("drm: Add reference counting to drm_atomic_state")
Cc: <stable@vger.kernel.org> # v4.10+
(cherry picked from commit 6d281b1f79)
2017-10-09 14:26:45 +02:00
Rafael J. Wysocki
a5950f2617 Merge back suspend/resume/hibernate material for v4.15. 2017-10-09 14:20:07 +02:00
Takashi Iwai
a6aa6cdcec ALSA: usb-audio: Apply vendor ID matching for sample rate quirk
So far, lots of Plantronics, MS and Phoenix Audio devices need the
quirk not to read sample rate back, and the list just grows.
In this patch, instead of adding each device, apply the quirk by
matching with these vendors.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09 14:11:38 +02:00
Takashi Iwai
545633f6fe Merge branch 'for-linus' into for-next 2017-10-09 14:11:30 +02:00
Takashi Iwai
5803b02388 ALSA: seq: Fix copy_from_user() call inside lock
The event handler in the virmidi sequencer code takes a read-lock for
the linked list traverse, while it's calling snd_seq_dump_var_event()
in the loop.  The latter function may expand the user-space data
depending on the event type.  It eventually invokes copy_from_user(),
which might be a potential dead-lock.

The sequencer core guarantees that the user-space data is passed only
with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it
and always takes read-lock().  For avoiding the problem above, this
patch introduces rwsem for non-atomic case, while keeping rwlock for
atomic case.

Also while we're at it: the superfluous irq flags is dropped in
snd_virmidi_input_open().

Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09 14:10:13 +02:00
Kai-Heng Feng
c247487c0d ALSA: usb-audio: Add sample rate quirk for Plantronics P610
Like other Plantronics devices, P610 does not support sample
rate reading. Apply sample rate quirk to it.

BugLink: https://bugs.launchpad.net/bugs/1719853

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09 14:10:11 +02:00
Jeffy Chen
6d281b1f79 drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume()
Kmemleak reported memory leak after suspend and resume:
unreferenced object 0xffffffc0e31d8880 (size 128):
  comm "bash", pid 181, jiffies 4294763583 (age 24.694s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 20 a2 eb c0 ff ff ff  ......... ......
    01 00 00 00 00 00 00 00 80 87 1d e3 c0 ff ff ff  ................
  backtrace:
    [<ffffffc00034bb64>] __save_stack_trace+0x48/0x6c
    [<ffffffc00034c244>] create_object+0x138/0x254
    [<ffffffc0009dd218>] kmemleak_alloc+0x58/0x8c
    [<ffffffc000346de4>] kmem_cache_alloc_trace+0x188/0x254
    [<ffffffc0005af4c0>] drm_atomic_state_alloc+0x3c/0x88
    [<ffffffc000591f0c>] drm_atomic_helper_duplicate_state+0x28/0x158
    [<ffffffc000592098>] drm_atomic_helper_suspend+0x5c/0xf0

Problem here is that we are duplicating the drm_atomic_state in
drm_atomic_helper_suspend(), but not unreference it in the resume path.

Fixes: 1494276000 ("drm/atomic-helper: Implement subsystem-level suspend/resume")
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009064641.15174-1-jeffy.chen@rock-chips.com
Fixes: 0853695c3b ("drm: Add reference counting to drm_atomic_state")
Cc: <stable@vger.kernel.org> # v4.10+
2017-10-09 13:54:37 +02:00
Mathias Krause
6b32c126d3 x86/alternatives: Fix alt_max_short macro to really be a max()
The alt_max_short() macro in asm/alternative.h does not work as
intended, leading to nasty bugs. E.g. alt_max_short("1", "3")
evaluates to 3, but alt_max_short("3", "1") evaluates to 1 -- not
exactly the maximum of 1 and 3.

In fact, I had to learn it the hard way by crashing my kernel in not
so funny ways by attempting to make use of the ALTENATIVE_2 macro
with alternatives where the first one was larger than the second
one.

According to [1] and commit dbe4058a6a ("x86/alternatives: Fix
ALTERNATIVE_2 padding generation properly") the right handed side
should read "-(-(a < b))" not "-(-(a - b))". Fix that, to make the
macro work as intended.

While at it, fix up the comments regarding the additional "-", too.
It's not about gas' usage of s32 but brain dead logic of having a
"true" value of -1 for the < operator ... *sigh*

Btw., the one in asm/alternative-asm.h is correct. And, apparently,
all current users of ALTERNATIVE_2() pass same sized alternatives,
avoiding to hit the bug.

[1] http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax

Reviewed-and-tested-by: Borislav Petkov <bp@suse.de>
Fixes: dbe4058a6a ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1507228213-13095-1-git-send-email-minipli@googlemail.com
2017-10-09 13:35:17 +02:00
Andy Lutomirski
924c6b900c x86/mm/64: Fix reboot interaction with CR4.PCIDE
Trying to reboot via real mode fails with PCID on: long mode cannot
be exited while CR4.PCIDE is set.  (No, I have no idea why, but the
SDM and actual CPUs are in agreement here.)  The result is a GPF and
a hang instead of a reboot.

I didn't catch this in testing because neither my computer nor my VM
reboots this way.  I can trigger it with reboot=bios, though.

Fixes: 660da7c922 ("x86/mm: Enable CR4.PCIDE on supported systems")
Reported-and-tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/f1e7d965998018450a7a70c2823873686a8b21c0.1507524746.git.luto@kernel.org
2017-10-09 13:31:04 +02:00
Thomas Gleixner
e43b3b5854 genirq/cpuhotplug: Enforce affinity setting on startup of managed irqs
Managed interrupts can end up in a stale state on CPU hotplug. If the
interrupt is not targeting a single CPU, i.e. the affinity mask spawns
multiple CPUs then the following can happen:

After boot:

dstate:   0x01601200
            IRQD_ACTIVATED
            IRQD_IRQ_STARTED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_SET
            IRQD_AFFINITY_MANAGED
node:     0
affinity: 24-31
effectiv: 24
pending:  0

After offlining CPU 31 - 24

dstate:   0x01a31000
            IRQD_IRQ_DISABLED
            IRQD_IRQ_MASKED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_SET
            IRQD_AFFINITY_MANAGED
            IRQD_MANAGED_SHUTDOWN
node:     0
affinity: 24-31
effectiv: 24
pending:  0

Now CPU 25 gets onlined again, so it should get the effective interrupt
affinity for this interruopt, but due to the x86 interrupt affinity setter
restrictions this ends up after restarting the interrupt with:

dstate:   0x01601300
            IRQD_ACTIVATED
            IRQD_IRQ_STARTED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_SET
            IRQD_SETAFFINITY_PENDING
            IRQD_AFFINITY_MANAGED
node:     0
affinity: 24-31
effectiv: 24
pending:  24-31

So the interrupt is still affine to CPU 24, which was the last CPU to go
offline of that affinity set and the move to an online CPU within 24-31,
in this case 25, is pending. This mechanism is x86/ia64 specific as those
architectures cannot move interrupts from thread context and do this when
an interrupt is actually handled. So the move is set to pending.

Whats worse is that offlining CPU 25 again results in:

dstate:   0x01601300
            IRQD_ACTIVATED
            IRQD_IRQ_STARTED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_SET
            IRQD_SETAFFINITY_PENDING
            IRQD_AFFINITY_MANAGED
node:     0
affinity: 24-31
effectiv: 24
pending:  24-31

This means the interrupt has not been shut down, because the outgoing CPU
is not in the effective affinity mask, but of course nothing notices that
the effective affinity mask is pointing at an offline CPU.

In the case of restarting a managed interrupt the move restriction does not
apply, so the affinity setting can be made unconditional. This needs to be
done _before_ the interrupt is started up as otherwise the condition for
moving it from thread context would not longer be fulfilled.

With that change applied onlining CPU 25 after offlining 31-24 results in:

dstate:   0x01600200
            IRQD_ACTIVATED
            IRQD_IRQ_STARTED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_MANAGED
node:     0
affinity: 24-31
effectiv: 25
pending:  

And after offlining CPU 25:

dstate:   0x01a30000
            IRQD_IRQ_DISABLED
            IRQD_IRQ_MASKED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_MANAGED
            IRQD_MANAGED_SHUTDOWN
node:     0
affinity: 24-31
effectiv: 25
pending:  

which is the correct and expected result.

Fixes: 761ea388e8 ("genirq: Handle managed irqs gracefully in irq_startup()")
Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: axboe@kernel.dk
Cc: linux-scsi@vger.kernel.org
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: mpe@ellerman.id.au
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: keith.busch@intel.com
Cc: peterz@infradead.org
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
2017-10-09 13:26:48 +02:00
Thomas Gleixner
60b09c51bb genirq/cpuhotplug: Add sanity check for effective affinity mask
The effective affinity mask handling has no safety net when the mask is not
updated by the interrupt chip or the mask contains offline CPUs.

If that happens the CPU unplug code fails to migrate interrupts.

Add sanity checks and emit a warning when the mask contains only offline
CPUs.

Fixes: 415fcf1a22 ("genirq/cpuhotplug: Use effective affinity mask")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
2017-10-09 13:26:48 +02:00
Thomas Gleixner
19e1d4e947 genirq: Warn when effective affinity is not updated
Emit a one time warning when the effective affinity mask is enabled in
Kconfig, but the interrupt chip does not update the mask in its
irq_set_affinity() callback,

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
2017-10-09 13:26:48 +02:00
Greg Kroah-Hartman
47a4b71c0b USB-serial fixes for v4.14-rc5
Here's a fix for a cp210x regression that prevented a class of devices
 from being successfully probed. Two use-after-free bugs in the console
 code are also fixed.
 
 Included are also some new device ids.
 
 All but the last three commits have been in linux-next with no reported
 issues.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEHszNKQClByu0A+9RQQ3kT97htJUFAlnbUXsRHGpvaGFuQGtl
 cm5lbC5vcmcACgkQQQ3kT97htJVXLg/+JHYT8hpPWITTDYviItiOp6lMTJwdQT6Q
 zD7NPChJGJvuuKBSZ/SnDToMYnMixErKbguQmYEsFj/8JQl/oLO6aTnK5r+aFQ4P
 k2YoIGSJoNYdW2695Myd8YrJAVmWxfJXVqjDPnfKRHkLb8huZ6WYJxg9x7maBssQ
 CITxDCjfXFvzwfzIaJYjvS9a7yOQDruW2KLS0zfmnazdG8UG4qyJoucbbLhsTT3y
 a1LDDufFGjwzk/Ve7l+T5BeOGBwRSpI51DWOaktXxdlf+aCflsLm4YK4zf/881cF
 VPLHmuBo4l6/lQSMMhgnz88e1XvUu8KJPZAx1WeBAW1Liv3puSSi+VnnBBD7R56w
 QihnaRFwPfTQZR2Hn97YFqU7gK8UZN7kq3g77k7DWxS+q8+hr0cUcywk8Tbygsq3
 SqMrmY/NLJilKsYRAFkmplGy+CSw7pfUjbvN8krDbPeC+3FoPkmfW1Jxm5pwT9j5
 WR1RAuBfmyaJf28/KUiNfUiiExSe7oezLB4BtLZHVf54FFWXkj1ruJgEi4/I8vYX
 wiqaHMp2iyx9UAO8p1OvdXFMbr6RujRR7ujOrdxR6hcxt0PlsBWpFxLFiIf8VsJJ
 WgpVpZPZGmadE6ZK9oTpEqBiTFTol9dAsrvwwihdiLo9KOvdLzJXqLO9YshpJjMR
 367/fkXynrA=
 =GjJU
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v4.14-rc5

Here's a fix for a cp210x regression that prevented a class of devices
from being successfully probed. Two use-after-free bugs in the console
code are also fixed.

Included are also some new device ids.

All but the last three commits have been in linux-next with no reported
issues.
2017-10-09 13:20:30 +02:00
Lin Zhang
49f817d793 netfilter: SYNPROXY: skip non-tcp packet in {ipv4, ipv6}_synproxy_hook
In function {ipv4,ipv6}_synproxy_hook we expect a normal tcp packet, but
the real server maybe reply an icmp error packet related to the exist
tcp conntrack, so we will access wrong tcp data.

Fix it by checking for the protocol field and only process tcp traffic.

Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-09 13:08:39 +02:00