Commit graph

932,869 commits

Author SHA1 Message Date
Pieter Jansen van Vuuren
c0b1bd9a8b nfp: add set ipv4 header action flower offload
Previously we did not have offloading support for set IPv4 actions. This
patch enables TC flower offload of set IPv4 src and dst address actions.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:56:36 -07:00
Pieter Jansen van Vuuren
da83d8fe58 nfp: add set ethernet header action flower offload
Previously we did not have offloading support for set ethernet actions.
This patch enables TC flower offload of set ethernet actions.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:56:35 -07:00
Pieter Jansen van Vuuren
fc53b4a701 nfp: add IPv6 ttl and tos match offloading support
Previously matching on IPv6 ttl and tos fields were not offloaded. This
patch enables offloading IPv6 ttl and tos as match fields.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:56:35 -07:00
Pieter Jansen van Vuuren
a1e9203cc6 nfp: add IPv4 ttl and tos match offloading support
Previously matching on IPv4 ttl and tos fields were not offloaded. This
patch enables offloading IPv4 ttl and tos as match fields.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:56:35 -07:00
Pieter Jansen van Vuuren
bb055c198d nfp: add mpls match offloading support
Previously MPLS match offloading was not supported. This patch enables
MPLS match offloading support for label, bos and tc fields.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:56:35 -07:00
Joe Perches
4e64b1ed15 net/ipv6: Convert icmpv6_push_pending_frames to void
commit cc71b7b071 ("net/ipv6: remove unused err variable on
icmpv6_push_pending_frames") exposed icmpv6_push_pending_frames
return value not being used.

Remove now unnecessary int err declarations and uses.

Miscellanea:

o Remove unnecessary goto and out: labels
o Realign arguments

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:52:31 -07:00
Chris Wilson
7c26240e8a drm/i915: Try harder to finish the idle-worker
If a worker requeues itself, it may switch to a different kworker pool,
which flush_work() considers as complete. To be strict, we then need to
keep flushing the work until it is no longer pending.

References: https://bugs.freedesktop.org/show_bug.cgi?id=102456
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006104038.22337-1-chris@chris-wilson.co.uk
2017-10-06 17:49:46 +01:00
Linus Torvalds
bf2db0b9f5 Merge branch 'for-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
 "Two more fixes for bugs introduced in 4.13.

  The sector_t problem with 32bit architecture and !LBDAF config seems
  serious but the number of affected deployments is hopefully low.

  The clashing status bits could lead to a confusing in-memory state of
  the whole-filesystem operations if used with the quota override sysfs
  knob"

* 'for-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix overlap of fs_info::flags values
  btrfs: avoid overflow when sector_t is 32 bit
2017-10-06 09:03:08 -07:00
Linus Torvalds
b77779b93d Two fixups for CephFS snapshot-handling patches in -rc1.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJZ142+AAoJEEp/3jgCEfOLPdQH/0wFtTLG7sKhEBVndsDUG8u0
 RUtLBE4dXFJU7IlLQOuAkD4GvC4XqttLIJs7bkUwSUu7Vk3+2OKk0JvUq2qKFl03
 tM5sWIqX5FkL9nenivV28YI6rOPHyghVXttVw/4xy5QYLJ1G3OoJpGPJOE44v5v9
 w96guw+EEaPWyn8+/SBhEkfpVAR2fRXe4UDKiLzGYLqYNYiGSSd90j/7F8I4uaNG
 hpQ6aJVJOzNoTQtfmsGyZ0DHuBD8/CSQOIumXdICegDk7stEVGaxSlkBX2ZwwR2q
 jwxIRj6ItM+jDORSgaVAhQ6NJktCxs+scfNFgu8MlQ+RaTOSnEkcvigA7DIVMrw=
 =h2CQ
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.14-rc4' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "Two fixups for CephFS snapshot-handling patches in -rc1"

* tag 'ceph-for-4.14-rc4' of git://github.com/ceph/ceph-client:
  ceph: fix __choose_mds() for LSSNAP request
  ceph: properly queue cap snap for newly created snap realm
2017-10-06 09:01:45 -07:00
Eugeniy Paltsev
ab8eb7db1d ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset
DW ethernet controller on HSDK hangs sometimes after SW reset, so
add reset node to make possible to reset DW ethernet controller HW.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-06 08:59:54 -07:00
Linus Torvalds
8d4ef4e15e Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
 "Fix a regression in 4.14 and one in 4.13. The latter is a case when
  Docker is doing something it really shouldn't and gets away with it.
  We now print a warning instead of erroring out.

  There are also fixes to several error paths"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix regression caused by exclusive upper/work dir protection
  ovl: fix missing unlock_rename() in ovl_do_copy_up()
  ovl: fix dentry leak in ovl_indexdir_cleanup()
  ovl: fix dput() of ERR_PTR in ovl_cleanup_index()
  ovl: fix error value printed in ovl_lookup_index()
  ovl: fix may_write_real() for overlayfs directories
2017-10-06 08:52:53 -07:00
Linus Torvalds
1249b571ba powerpc fixes for 4.14 #4
Nine small fixes, really nothing that stands out.
 
 A work around for a spurious MCE on Power9. A CXL fault handling fix, some fixes
 to the new XIVE code, and a fix to the new 32-bit STRICT_KERNEL_RWX code.
 
 Fixes for old code/stable: an fix to an incorrect TLB flush on boot but not on
 any current machines, a compile error on 4xx and a fix to memory hotplug when
 using radix (Power9).
 
 Thanks to:
   Anton Blanchard, Cédric Le Goater, Christian Lamparter, Christophe Leroy,
   Christophe Lombard, Guenter Roeck, Jeremy Kerr, Michael Neuling, Nicholas
   Piggin.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ11/yAAoJEFHr6jzI4aWAooYQAKjOKamLyxRotFGSqBfrfOMN
 UfWKAmfeoF/gi4z03x8JdhcMQ1CMh5c/cQmrwzkzDosQ2m83CEWzNbk0gFV0Tpld
 2qDTrEnBfTC4TRhCwWuOlaQC8LFeqxwpsCS6iXGpYoTY2NzmsbliPIQaruCIqj3f
 F+7etfTqGJ+gCCkGfT0s7m96QO+daaT32nXL1VM8i/rOOpwZ23oj6kR3/ZSTWxBc
 eyzvUcTLLhLp8hJoF0kU4f1VQtYijnpqK6ULr3wSfxYqjB9S4dsGyiF537aw5bKX
 UPUCoMgkttVy8Jh35dtvKLuMqlfjHGqoe6UcezSG9a6wxeUnQRzsVmXihNDSkyEt
 EawmPS6R5YaXXu9NKsleKBZDAdU4+EkcX24Wwn/lZy3wTKc1Lys+wH9hXuzzGNiH
 JYEcMacXvpM1yFYNT+ouyLtoT86VWVCdwihueBMV74lyV87Wr55zS65XP6Z+Bb8/
 aPL906sOAvnJW1JhHbYq/UxLfvs0enHNHpyR0xM4/oXi+RoGfhbM/MC1uJxv4w9z
 12n1hbrpaRxHSSnJr1gahCrDoNUXLjkO2+0Ur3iXP4tfMMhwDs8qCILeaKpNmzkC
 sO1ehOmXSSYqJLNiPmSIxs/QEzjFrvQdNwZOIav+3Tsc5ofR6wsauDCmfK5br2Mg
 BdhW7LXtqL77cmOzN95e
 =etbe
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Nine small fixes, really nothing that stands out.

  A work-around for a spurious MCE on Power9. A CXL fault handling fix,
  some fixes to the new XIVE code, and a fix to the new 32-bit
  STRICT_KERNEL_RWX code.

  Fixes for old code/stable: an fix to an incorrect TLB flush on boot
  but not on any current machines, a compile error on 4xx and a fix to
  memory hotplug when using radix (Power9).

  Thanks to: Anton Blanchard, Cédric Le Goater, Christian Lamparter,
  Christophe Leroy, Christophe Lombard, Guenter Roeck, Jeremy Kerr,
  Michael Neuling, Nicholas Piggin"

* tag 'powerpc-4.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Increase memory block size to 1GB on radix
  powerpc/mm: Call flush_tlb_kernel_range with interrupts enabled
  powerpc/xive: Clear XIVE internal structures when a CPU is removed
  powerpc/xive: Fix IPI reset
  powerpc/4xx: Fix compile error with 64K pages on 40x, 44x
  powerpc: Fix action argument for cpufeatures-based TLB flush
  cxl: Fix memory page not handled
  powerpc: Fix workaround for spurious MCE on POWER9
  powerpc: Handle MCE on POWER9 with only DSISR bit 30 set
2017-10-06 08:47:21 -07:00
Linus Torvalds
9c0c1adab6 i915 and sun4i fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZ1uMDAAoJEAx081l5xIa+qBsP/iL+nL1Sq0/fFLXS/PXPBb6Z
 9bWI1/pXMSNNhPJg6u8l4urC5fwv1jeLJGfNnuQAF0sVw8uxd1lBeAVg69511Pym
 XdefFgSqy3mwIEbserRim3n4D5QdxS+qAObtmjf6Ocdb0EIWfyrqLspDoRnGQm74
 nnZ2VG2Lg9SLyV95iGxbVYX/ua52+QTKtrO9RqC0aPFn5E4SC8v+uTUlJVUR3BGQ
 ls+Oi64Naj8mHtaa4F978xv8sYGFvurD3/uiSfvSXTiMu5+BhXM8TUtv4wmu8olw
 QMKfaF3vw6SEbd6MLt/D44l/BzqXWnGQw6cYpne8/0bnS80JuPb2rE3aACe1gjlF
 XgM4iaHVye67UeHtfnmtIGoyUG/mmXHjIdbjQ7y265qihkJ9/qFscpEe1uWqr3b1
 qpd+IUPbHsG9PRcf9PT8aqfHSV7E4xMwhZes2qEkyDsjkb1mOQHmbWQe5HtWaCn8
 by5hSIossBBevlcQ3AwQ3tfl5iYvu0Y53G/J4wH1b52DTLfbYFMrcCVM+r9L/HLR
 EokbpIqj1N+skP55iDf6avX9av5kLoII/hA8WHkWUmsksIKfRUJt5adBicO29y23
 WjyYy7Rczr5iePw/PxZG/NjnRCXHx8VOhwy2AFZILjPEwrEAF0CQ6ZYC19if5jCI
 BWRNqbZtle8ZO9rBEzVb
 =mn3h
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-for-v4.14-rc4' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Some i915 fixes from the last two weeks (as they were on a strange
  base and I just waited for rc3), also a single sun4i hdmi fix"

* tag 'drm-fixes-for-v4.14-rc4' of git://people.freedesktop.org/~airlied/linux:
  drm/i915/glk: Fix DMC/DC state idleness calculation
  drm/i915/cnl: Reprogram DMC firmware after S3/S4 resume
  drm/i915: Fix DDI PHY init if it was already on
  drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
  drm/i915/bios: ignore HDMI on port A
  drm/i915: remove redundant variable hw_check
  drm/i915: always update ELD connector type after get modes
2017-10-06 08:42:06 -07:00
Linus Torvalds
27efed3e83 Merge branch 'core-watchdog-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull watchddog clean-up and fixes from Thomas Gleixner:
 "The watchdog (hard/softlockup detector) code is pretty much broken in
  its current state. The patch series addresses this by removing all
  duct tape and refactoring it into a workable state.

  The reasons why I ask for inclusion that late in the cycle are:

   1) The code causes lockdep splats vs. hotplug locking which get
      reported over and over. Unfortunately there is no easy fix.

   2) The risk of breakage is minimal because it's already broken

   3) As 4.14 is a long term stable kernel, I prefer to have working
      watchdog code in that and the lockdep issues resolved. I wouldn't
      ask you to pull if 4.14 wouldn't be a LTS kernel or if the
      solution would be easy to backport.

   4) The series was around before the merge window opened, but then got
      delayed due to the UP failure caused by the for_each_cpu()
      surprise which we discussed recently.

  Changes vs. V1:

   - Addressed your review points

   - Addressed the warning in the powerpc code which was discovered late

   - Changed two function names which made sense up to a certain point
     in the series. Now they match what they do in the end.

   - Fixed a 'unused variable' warning, which got not detected by the
     intel robot. I triggered it when trying all possible related config
     combinations manually. Randconfig testing seems not random enough.

  The changes have been tested by and reviewed by Don Zickus and tested
  and acked by Micheal Ellerman for powerpc"

* 'core-watchdog-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  watchdog/core: Put softlockup_threads_initialized under ifdef guard
  watchdog/core: Rename some softlockup_* functions
  powerpc/watchdog: Make use of watchdog_nmi_probe()
  watchdog/core, powerpc: Lock cpus across reconfiguration
  watchdog/core, powerpc: Replace watchdog_nmi_reconfigure()
  watchdog/hardlockup/perf: Fix spelling mistake: "permanetely" -> "permanently"
  watchdog/hardlockup/perf: Cure UP damage
  watchdog/hardlockup: Clean up hotplug locking mess
  watchdog/hardlockup/perf: Simplify deferred event destroy
  watchdog/hardlockup/perf: Use new perf CPU enable mechanism
  watchdog/hardlockup/perf: Implement CPU enable replacement
  watchdog/hardlockup/perf: Implement init time detection of perf
  watchdog/hardlockup/perf: Implement init time perf validation
  watchdog/core: Get rid of the racy update loop
  watchdog/core, powerpc: Make watchdog_nmi_reconfigure() two stage
  watchdog/sysctl: Clean up sysctl variable name space
  watchdog/sysctl: Get rid of the #ifdeffery
  watchdog/core: Clean up header mess
  watchdog/core: Further simplify sysctl handling
  watchdog/core: Get rid of the thread teardown/setup dance
  ...
2017-10-06 08:36:41 -07:00
Suzuki K Poulose
ae2e972dae arm64: Ensure fpsimd support is ready before userspace is active
We register the pm/hotplug callbacks for FPSIMD as late_initcall,
which happens after the userspace is active (from initramfs via
populate_rootfs, a rootfs_initcall). Make sure we are ready even
before the userspace could potentially use it, by promoting to
a core_initcall.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-10-06 16:35:25 +01:00
Suzuki K Poulose
c0d8832e78 arm64: Ensure the instruction emulation is ready for userspace
We trap and emulate some instructions (e.g, mrs, deprecated instructions)
for the userspace. However the handlers for these are registered as
late_initcalls and the userspace could be up and running from the initramfs
by that time (with populate_rootfs, which is a rootfs_initcall()). This
could cause problems for the early applications ending up in failure
like :

[   11.152061] modprobe[93]: undefined instruction: pc=0000ffff8ca48ff4

This patch promotes the specific calls to core_initcalls, which are
guaranteed to be completed before we hit userspace.

Cc: stable@vger.kernel.org
Cc: Dave Martin <dave.martin@arm.com>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: James Morse <james.morse@arm.com>
Reported-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-10-06 16:35:21 +01:00
Michal Wajdeczko
bb8920f5be drm/i915: Fix pointer-to-int conversion
Commit faf654864b ("drm/i915: Unify uC variable types to avoid
flooding checkpatch.pl") breaks 32-bit kernel builds. Lets use
cast helper to make compiler happy.

v2: introduce ptr_to_u64 (Chris)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006130844.49012-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-06 16:29:47 +01:00
Jacob Keller
b74f571f59 i40e/i40evf: organize and re-number feature flags
Now that we've reduced the number of flags, organize similar flags
together and re-number them accordingly.

Since we don't yet have more than 32 flags, we'll use a u32 for both the
hw_features and flag field. Should we gain more flags in the future, we
may need to convert to a u64 or separate flags out into two fields.

One alternative approach considered, but not implemented here, was to
use an enumeration for the flag variables, and create a macro
I40E_FLAG() which used string concatenation to generate BIT_ULL values.
This has the advantage of making the actual bit values compile-time
dynamic so that we do not need to worry about matching the order to the
bit value. However, this does produce a high level of code churn, and
makes it more difficult to read a dumped flags value when debugging.

Change-ID: I8653fff69453cd547d6fe98d29dfa9d8710387d1
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:32 -07:00
Jacob Keller
a5340d933e i40e: ignore skb->xmit_more when deciding to set RS bit
Since commit 6a7fded776 ("i40e: Fix RS bit update in Tx path and
disable force WB workaround") we've tried to "optimize" setting the
RS bit based around skb->xmit_more. This same logic was refactored
in commit 1dc8b53879 ("i40e: Reorder logic for coalescing RS bits"),
but ultimately was not functionally changed.

Using skb->xmit_more in this way is incorrect, because in certain
circumstances we may see a large number of skbs in sequence with
xmit_more set. This leads to a performance loss as the hardware does not
writeback anything for those packets, which delays the time it takes for
us to respond to the stack transmit requests. This significantly impacts
UDP performance, especially when layered with multiple devices, such as
bonding, VLANs, and vnet setups.

This was not noticed until now because it is difficult to create a setup
which reproduces the issue. It was discovered in a UDP_STREAM test in
a VM, connected using a vnet device to a bridge, which is connected to
a bonded pair of X710 ports in active-backup mode with a VLAN. These
layered devices seem to compound the number of skbs transmitted at once
by the qdisc. Additionally, the problem can be masked by reducing the
ITR value.

Since the original commit does not provide strong justification for this
RS bit "optimization", revert to the previous behavior of setting the RS
bit every 4th packet.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:32 -07:00
Jacob Keller
0a3b4f702f i40evf: enable support for VF VLAN tag stripping control
A recent commit 809481484e5d ("i40e/i40evf: support for VF VLAN tag
stripping control") added support for VFs to negotiate the control of
VLAN tag stripping. This should have allowed VFs to disable the feature.
Unfortunately, the flag was set only in netdev->feature flags and not in
netdev->hw_features.

This ultimately causes the stack to assume that it cannot change the
flag, so it was unchangeable and marked as [fixed] in the ethtool -k
output.

Fix this by setting the feature in hw_features first, just as we do for
the PF code. This enables ethtool -K to disable the feature correctly,
and fully enables user control of the VLAN tag stripping feature.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:32 -07:00
Mariusz Stachura
052b93d0c2 i40e: do not enter PHY debug mode while setting LEDs behaviour
Previous implementation of LED set/get functions required to enter
PHY debug mode, in order to prevent access to it from FW and SW at
the same time. Reset of all ports was a unwanted side effect.

Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:32 -07:00
Alan Brady
19b7960b2d i40e: implement split PCI error reset handler
This patch implements the PCI error handler reset_prepare and reset_done.
This allows us to handle function level reset.  Without this patch we
are unable to perform and recover from an FLR correctly and this will cause
VFs to be unable to recover from an FLR on the PF.

Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:32 -07:00
Filip Sadowski
013df598d6 i40e: Properly maintain flow director filters list
When there is no space for more flow director filters and user requested to
add a new one it is rejected by firmware and automatically removed from the
filter list maintained by driver. This behaviour is correct. Afterwards
existing filter can be removed making free slot for the new one. This
however causes the newly added filter to be accepted by firmware but
removed from driver filter list resulting in not showing after issuing
'ethtool -n <dev_name>'.

This happened due to not clearing the variable pf->fd_inv which stores
filter number to be removed from the list when firmware refused to add the
requested filter. It caused the filter with this specific ID to be
constantly removed once it was added to the list although it has been
accepted by firmware and effectively applied to the NIC.
It was fixed by clearing pf->fd_inv variable after removal of the filter
from the list when it was rejected by firmware.

Signed-off-by: Filip Sadowski <filip.sadowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:32 -07:00
Filip Sadowski
9a858178ef i40e: Display error message if module does not meet thermal requirements
This patch causes error message to be displayed when NIC detects
insertion of module that does not meet thermal requirements.

Signed-off-by: Filip Sadowski <filip.sadowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:31 -07:00
Alice Michael
7f66182263 i40e: fix merge error
This patch removes some code that was accidentally added to
the wrong function with a merge error.  Fixes: c53934c6d1
("i40e: fix: do not sleep in netdev_ops")

Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:31 -07:00
Jesse Brandeburg
bd6cd4e6dd i40e/i40evf: use DECLARE_BITMAP for state
When using set_bit and friends, we should be using actual
bitmaps, and fix all the locations where we might access
it.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:31 -07:00
Mitch Williams
0a0d9af5bc i40e: fix incorrect register definition
This register was defined incorrectly. Fix the increment value to 8, and
replace the iterator with _i to make the definition consistent with
other statistics registers.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:31 -07:00
Mitch Williams
60518a0489 i40e: redfine I40E_PHY_TYPE_MAX
Since I40E_PHY_TYPE_MAX is used as an iterator, usually combined with
some sort of bit-shifting, it should only include actual PHY types and
not error cases. Move it up in the enum declaration so that loops only
iterate across valid PHY types.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:31 -07:00
Alan Brady
c3d26b75c2 i40e: re-enable PTP L4 capabilities for XL710 if FW >6.0
Starting with XL710 FW 5.3 PTP L4 was disabled for XL710 due to a bug.  The
bug has since been resolved in XL710 FW >6.0 and PTP L4 can now be
re-enabled on those devices with updated firmware.

Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:31 -07:00
Jacob Keller
be664cbefc i40e/i40evf: spread CPU affinity hints across online CPUs only
Currently, when setting up the IRQ for a q_vector, we set an affinity
hint based on the v_idx of that q_vector. Meaning a loop iterates on
v_idx, which is an incremental value, and the cpumask is created based
on this value.

This is a problem in systems with multiple logical CPUs per core (like in
simultaneous multithreading (SMT) scenarios). If we disable some logical
CPUs, by turning SMT off for example, we will end up with a sparse
cpu_online_mask, i.e., only the first CPU in a core is online, and
incremental filling in q_vector cpumask might lead to multiple offline
CPUs being assigned to q_vectors.

Example: if we have a system with 8 cores each one containing 8 logical
CPUs (SMT == 8 in this case), we have 64 CPUs in total. But if SMT is
disabled, only the 1st CPU in each core remains online, so the
cpu_online_mask in this case would have only 8 bits set, in a sparse way.

In general case, when SMT is off the cpu_online_mask has only C bits set:
0, 1*N, 2*N, ..., C*(N-1)  where
C == # of cores;
N == # of logical CPUs per core.
In our example, only bits 0, 8, 16, 24, 32, 40, 48, 56 would be set.

Instead, we should only assign hints for CPUs which are online. Even
better, the kernel already provides a function, cpumask_local_spread()
which takes an index and returns a CPU, spreading the interrupts across
local NUMA nodes first, and then remote ones if necessary.

Since we generally have a 1:1 mapping between vectors and CPUs, there
is no real advantage to spreading vectors to local CPUs first. In order
to avoid mismatch of the default XPS hints, we'll pass -1 so that it
spreads across all CPUs without regard to the node locality.

Note that we don't need to change the q_vector->affinity_mask as this is
initialized to cpu_possible_mask, until an actual affinity is set and
then notified back to us.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:31 -07:00
Mitch Williams
64615b5418 i40e: add private flag to control source pruning
By default, our devices do source pruning, that is, they drop receive
packets that have the source MAC matching one of the receive filters.
Unfortunately, this breaks ARP monitoring in channel bonding, as the
bonding driver expects devices to receive ARPs containing their own
source address.

Add an ethtool private flag to control this feature.

Also, remove the netif_running() check when we process our private
flags. It's OK to reset when the device is closed and in most cases we
need the reset the apply these changes.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:31 -07:00
Rami Rosen
ec2f25d203 i40e: fix a typo in i40e_pf documentation
This patch fixes a typo in i40e_pf object documentation; num_req_vfs
refers to the number of VFs requested for the PF.

Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06 08:11:31 -07:00
Michal Wajdeczko
ead92edbd6 drm/i915/huc: Fix includes in intel_huc.c
Fix includes order and make sure we only include required headers.
While here, make intel_huc.h header self-contained.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006090209.67852-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-06 16:01:15 +01:00
Jens Axboe
775d3a35dc backing-dev: kill unused pdflush_proc_obsolete()
After commit b35bd0d9f8, pdflush_proc_obsolete() is no longer
used. Kill the function and declaration.

Reported-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-06 08:15:15 -06:00
Joerg Roedel
ec154bf56b iommu/vt-d: Don't register bus-notifier under dmar_global_lock
The notifier function will take the dmar_global_lock too, so
lockdep complains about inverse locking order when the
notifier is registered under the dmar_global_lock.

Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Fixes: 59ce0515cd ('iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-10-06 15:09:30 +02:00
Eric Dumazet
e466af75c0 netfilter: x_tables: avoid stack-out-of-bounds read in xt_copy_counters_from_user
syzkaller reports an out of bound read in strlcpy(), triggered
by xt_copy_counters_from_user()

Fix this by using memcpy(), then forcing a zero byte at the last position
of the destination, as Florian did for the non COMPAT code.

Fixes: d7591f0c41 ("netfilter: x_tables: introduce and use xt_copy_counters_from_user")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-06 15:04:05 +02:00
Pablo Neira Ayuso
5f9bfe0ef6 netfilter: nf_tables: do not dump chain counters if not enabled
Chain counters are only enabled on demand since 9f08ea8481, skip them
when dumping them via netlink.

Fixes: 9f08ea8481 ("netfilter: nf_tables: keep chain counters away from hot path")
Reported-by: Johny Mattsson <johny.mattsson+kernel@gmail.com>
Tested-by: Johny Mattsson <johny.mattsson+kernel@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-06 14:49:19 +02:00
Mark Santaniello
e9516c0813 perf script: Add missing separator for "-F ip,brstack" (and brstackoff)
Prior to commit 55b9b50811 ("perf script: Support -F brstack,dso and
brstacksym,dso"), we were printing a space before the brstack data. It
seems that this space was important.  Without it, parsing is difficult.

Very sorry for the mistake.

Notice here how the "ip" and "brstack" run together:

$ perf script -F ip,brstack | head -n 1
          22e18c40x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0 0x22e195d/0x22e1990/P/-/-/0 0x22e18e9/0x22e1943/P/-/-/0 0x22e1a69/0x22e18c0/P/-/-/0 0x22e19f7/0x22e1a20/P/-/-/0 0x22e1910/0x22e19ee/P/-/-/0 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0 0x22e195d/0x22e1990/P/-/-/0 0x22e18e9/0x22e1943/P/-/-/0 0x22e1a69/0x22e18c0/P/-/-/0 0x22e19f7/0x22e1a20/P/-/-/0 0x22e1910/0x22e19ee/P/-/-/0 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0

After this diff, sanity is restored:

$ perf script -F ip,brstack | head -n 1
          22e18c4 0x22e19e2/0x22e190b/P/-/-/0  0x22e19a1/0x22e19d0/P/-/-/0  0x22e195d/0x22e1990/P/-/-/0  0x22e18e9/0x22e1943/P/-/-/0  0x22e1a69/0x22e18c0/P/-/-/0  0x22e19f7/0x22e1a20/P/-/-/0  0x22e1910/0x22e19ee/P/-/-/0  0x22e19e2/0x22e190b/P/-/-/0  0x22e19a1/0x22e19d0/P/-/-/0  0x22e195d/0x22e1990/P/-/-/0  0x22e18e9/0x22e1943/P/-/-/0  0x22e1a69/0x22e18c0/P/-/-/0  0x22e19f7/0x22e1a20/P/-/-/0  0x22e1910/0x22e19ee/P/-/-/0  0x22e19e2/0x22e190b/P/-/-/0  0x22e19a1/0x22e19d0/P/-/-/0

Signed-off-by: Mark Santaniello <marksan@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.13+ <stable@vger.kernel.org>
Fixes: 55b9b50811 ("perf script: Support -F brstack,dso and brstacksym,dso")
Link: http://lkml.kernel.org/r/20171006080722.3442046-1-marksan@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-06 09:48:32 -03:00
Maciej Purski
c0374eb804 drm/bridge: add Silicon Image SiI9234 driver
SiI9234 transmitter converts eTMDS/HDMI signal to MHL 1.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.

This patch is based on the code refactored by Tomasz Stanislawski
<t.stanislaws@samsung.com>, which was initially developed by:
Adam Hampson <ahampson@sta.samsung.com>
Erik Gilling <konkers@android.com>
Shankar Bandal <shankar.b@samsung.com>
Dharam Kumar <dharam.kr@samsung.com>

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Acked-by: Rob Herring <robh@kernel.org> [for dt bindings]
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507212431-5801-2-git-send-email-m.purski@samsung.com
2017-10-06 14:28:22 +02:00
Luca Coelho
f2abcfa6c8 iwlwifi: remove dflt_pwr_limit from the transport
The default power limit read from the SPLC method in ACPI doesn't
have anything to do with the transport and is only used in the opmode,
so we can remove it from the trans.  Additionally, this value is only
user when the opmode is starting, so we don't need to store it
anywhere.

Remove the dflt_pwr_limit element from the trans and move call to
iwl_acpi_get_pwr_limit() call to mvm.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:34 +03:00
Johannes Berg
42fa5e0e32 iwlwifi: mvm: warn on invalid statistics size
Getting the wrong statistics size is a problem, having a warning
will help us catch it quicker during firmware/driver development.
In released firmware/driver versions, we obviously make sure this
won't happen.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:33 +03:00
Luca Coelho
1184611ee8 iwlwifi: acpi: move code that reads SPLC to acpi
Move most of the set_dflt_pwr_limit() function to acpi.c and make it
return the pwr_limit value instead of setting directly.  Also rename
it to iwl_acpi_get_pwr_limit().

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:33 +03:00
Johannes Berg
e59a00f488 iwlwifi: fix indentation in a000 family configuration
Fix the double indentation in the configuration structs
for a000 family devices.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:33 +03:00
Luca Coelho
45f65569e0 iwlwifi: acpi: move function to get mcc into acpi code
The iwl_get_bios_mcc() function was in the iwl-nvm-parse.c file, but
it has nothing to do with the NVM.  Move it to fw/acpi.c and rename it
to iwl_acpi_get_mcc().

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:32 +03:00
Luca Coelho
d953cdb8ee iwlwifi: acpi: remove a couple of unnecessary ifdefs
Some of the #ifdef CONFIG_ACPI are not needed anymore, so they can be
removed.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:32 +03:00
Luca Coelho
ed1a962db7 iwlwifi: acpi: make iwl_get_bios_mcc() use the common acpi functions
The way iwl_get_bios_mcc() gets the WiFi package and checks for its
integrity is almost identical to the new iwl_acpi_get_wifi_pkg()
function.  Instead of having duplicate code, convert it to use the
common code.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:31 +03:00
Luca Coelho
45a5c6f68b iwlwifi: acpi: use iwl_acpi_get_wifi_pkg when reading reading SPLC
Instead of finding the wifi package with its own code, we can reuse
the new iwl_acpi_get_wifi_pkg() function when reading the default
power limit from SPLC.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:30 +03:00
Luca Coelho
2fa388cfeb iwlwifi: acpi: generalize iwl_mvm_sar_find_wifi_pkg()
Move this function to acpi.c, renaming it to iwl_acpi_get_wifi_pkg(),
because it can also be used with other methods (i.e. SPLC and WRDD).

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:29 +03:00
Luca Coelho
e7a3b8d879 iwlwifi: acpi: move ACPI-related definitions to acpi.h
The ACPI table size definitions were spread around the different files
that used them.  Move them all to a common place.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:29 +03:00
Luca Coelho
1c73acf58b iwlwifi: acpi: move ACPI method definitions to acpi.h
Instead of defining each method where they are used and re-defining
WIFI_DOMAIN in each one of them, move all the definitions to a central
place and define the domain only a single time.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06 15:22:29 +03:00