Enable the buses that are in use and the devices that are attached.
Currently that includes the battery backed RTC, temperature measurement
and EEPROM.
Some of these buses are for hotplugged cards, such as PCIe cards.
Others do not yet have upstream drivers, so there are no devices
attached.
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable the buses that are in use and the devices that are attached.
Currently that is just the battery backed RTC.
Some of these buses are for hotplugged cards, such as PCIe cards. Others
do not yet have upstream drivers, so there are no devices attached.
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Now with an upstream i2c bus driver, we can add the 14 i2c buses that
exist in ASPEED G4 and G5 generation SoCs.
It also adds aliases for the 14 built-in I2C busses to ensure userspace
sees the numbering staring from zero and counting up.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
We try to keep the nodes in address order. The ADC node was out of
place.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Moving the subnodes out of the pinctrl node declaration to a reference
allows easier access to the remaining parts of the devicetree.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Xo Wang <xow@google.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
If the vlan is down, free the packet instead of proceeding with other
processing, or counting it as received. If vlan interfaces are used
as slaves for bonding, with arp monitoring for connectivity, if the rx
counter is seen to be incrementing, then the bond device will not
observe that the interface is down.
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Vishakha Narvekar <Vishakha.Narvekar@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
x-netns interfaces are bound to two netns: the link netns and the upper
netns. Usually, this kind of interfaces is created in the link netns and
then moved to the upper netns. At the end, the interface is visible only
in the upper netns. The link nsid is advertised via netlink in the upper
netns, thus the user always knows where is the link part.
There is no such mechanism in the link netns. When the interface is moved
to another netns, the user cannot "follow" it.
This patch adds a new netlink attribute which helps to follow an interface
which moves to another netns. When the interface is unregistered, the new
nsid is advertised. If the interface is a x-netns interface (ie
rtnl_link_ops->get_link_net is defined), the nsid is allocated if needed.
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our first batch of fixes this release cycle, unfortunately a bit noisier
than usual. Two major groups stand out:
- Some pinctril dts/dtsi changes for stm32 due to a new driver being
merged during the merge window, and this aligns the DT contents between
the old format and the new. This could arguably be moved to the next
merge window but it also seemed relatively harmless to include now.
- Amlogic/meson had driver changes merged that required devicetree
changes to avoid functional/performance regressions. I've already
asked them to be more careful about this going forward, and making
sure drivers are compatible with older DTs when they make these kind
of changes. The platform is actively being upstreamed so there's a
few things in flight, we've seen this happen before and sometimes
it's hard to catch in time.
Besides that there is the usual mix of minor fixes.
-----BEGIN PGP SIGNATURE-----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=/0Nj
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Our first batch of fixes this release cycle, unfortunately a bit
noisier than usual. Two major groups stand out:
- Some pinctril dts/dtsi changes for stm32 due to a new driver being
merged during the merge window, and this aligns the DT contents
between the old format and the new. This could arguably be moved to
the next merge window but it also seemed relatively harmless to
include now.
- Amlogic/meson had driver changes merged that required devicetree
changes to avoid functional/performance regressions. I've already
asked them to be more careful about this going forward, and making
sure drivers are compatible with older DTs when they make these
kind of changes. The platform is actively being upstreamed so
there's a few things in flight, we've seen this happen before and
sometimes it's hard to catch in time.
Besides that there is the usual mix of minor fixes"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
ARM: dts: stm32: use right pinctrl compatible for stm32f469
ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board
ARM: defconfig: update Gemini defconfig
ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m
arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399
reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST
ARM: dts: da850-evm: add serial and ethernet aliases
ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
ARM: dts: am33xx: Add spi alias to match SOC schematics
ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts
arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399
arm64: dt marvell: Fix AP806 system controller size
MAINTAINERS: add Macchiatobin maintainers entry
ARC: reset: remove the misleading v1 suffix all over
ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
ARC: reset: Only build on archs that have IOMEM
ARM: at91: Replace uses of virt_to_phys with __pa_symbol
...
Update my imgtec.com and personal email address to my kernel.org one in
a few places as MIPS will soon no longer be part of Imagination
Technologies, and add mappings in .mailcap so get_maintainer.pl reports
the right address.
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexei Starovoitov says:
====================
bpf: muli prog support for cgroup-bpf
v1->v2:
- fixed accidentally swapped two lines which caused static_key not going to zero
- addressed Martin's feedback and changed prog_query to be consistent
with verifier output: return -enospc and fill supplied buffer instead
of just returning -enospc when buffer is too small to fit all prog_ids
v1:
cgroup-bpf use cases are getting more advanced and running only
one program per cgroup is no longer enough. Therefore introduce
support for attaching multiple programs per cgroup and running
a set of effective programs.
These patches introduces BPF_F_ALLOW_MULTI flag for BPF_PROG_ATTACH cmd.
The default is still NONE and behavior of BPF_F_ALLOW_OVERRIDE flag
is unchanged.
The difference between three possible flags for BPF_PROG_ATTACH command:
- NONE(default): No further bpf programs allowed in the subtree.
- BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program,
the program in this cgroup yields to sub-cgroup program.
- BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program,
that cgroup program gets run in addition to the program in this cgroup.
Most of the logic is in patch 1. Even when cgroup doesn't have
any programs attached its set of effective program can be non-empty.
To quickly execute them and avoid penalizing cgroups without
any effective programs introduce 'struct bpf_prog_array'
which has an optimization for cgroups with zero effective programs.
Patch 2 introduces BPF_PROG_QUERY command for introspection
Patch 3 makes verifier more strict for cgroup-bpf program types.
Patch 4+ are tests.
More details in individual patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
use BPF_PROG_QUERY command to strengthen test coverage
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
add support for BPF_PROG_QUERY command to libbpf
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
tools/include/uapi/linux/bpf.h got out of sync with actual kernel header.
Update it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
create 5 cgroups, attach 6 progs and check that progs are executed as:
cgrp1 (MULTI progs A, B) ->
cgrp2 (OVERRIDE prog C) ->
cgrp3 (MULTI prog D) ->
cgrp4 (OVERRIDE prog E) ->
cgrp5 (NONE prog F)
the event in cgrp5 triggers execution of F,D,A,B in that order.
if prog F is detached, the execution is E,D,A,B
if prog F and D are detached, the execution is E,A,B
if prog F, E and D are detached, the execution is C,A,B
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
introduce bpf_prog_detach2() that takes one more argument prog_fd
vs bpf_prog_detach() that takes only attach_fd and type.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
with addition of tnum logic the verifier got smart enough and
we can enforce return codes at program load time.
For now do so for cgroup-bpf program types.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
introduce BPF_PROG_QUERY command to retrieve a set of either
attached programs to given cgroup or a set of effective programs
that will execute for events within a cgroup
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
for cgroup bits
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple
bpf programs to a cgroup.
The difference between three possible flags for BPF_PROG_ATTACH command:
- NONE(default): No further bpf programs allowed in the subtree.
- BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program,
the program in this cgroup yields to sub-cgroup program.
- BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program,
that cgroup program gets run in addition to the program in this cgroup.
NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't
change their behavior. It only clarifies the semantics in relation
to new flag.
Only one program is allowed to be attached to a cgroup with
NONE or BPF_F_ALLOW_OVERRIDE flag.
Multiple programs are allowed to be attached to a cgroup with
BPF_F_ALLOW_MULTI flag. They are executed in FIFO order
(those that were attached first, run first)
The programs of sub-cgroup are executed first, then programs of
this cgroup and then programs of parent cgroup.
All eligible programs are executed regardless of return code from
earlier programs.
To allow efficient execution of multiple programs attached to a cgroup
and to avoid penalizing cgroups without any programs attached
introduce 'struct bpf_prog_array' which is RCU protected array
of pointers to bpf programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
for cgroup bits
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to BSpec GLK like BXT needs to ignore the idle state of cores
before starting the DMC firmware's DC state handler.
Fixes: dbb28b5c3d ("drm/i915/DMC/GLK: Load DMC on GLK")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-2-imre.deak@intel.com
(cherry picked from commit b7208a3f3e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The DMC firmware program memory is lost after S3/S4 system suspend, so
we need to reprogram it during resume.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103070
Fixes: cebfcead63 ("drm/i915/DMC/CNL: Load DMC on CNL")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-1-imre.deak@intel.com
(cherry picked from commit 57522c4c87)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
None of the locomo drivers in the tree implements the suspend and
resume callbacks from struct locomo_driver, so drop them and drop
the corresponding callbacks from locomo_bus_type.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch make selinux_task_prlimit() static since it is not used
anywhere else.
This fix the following build warning:
security/selinux/hooks.c:3981:5: warning: no previous prototype for 'selinux_task_prlimit' [-Wmissing-prototypes]
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch remove the unused variable sid
This fix the following build warning:
security/selinux/hooks.c:2921:6: warning: variable 'sid' set but not used [-Wunused-but-set-variable]
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The clock control is not explicitly controlled by the driver in two cases:
ACPI based systems and when the clock is part of the power sequence of the
camera module.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of granting client's full requests until we hit our DRC size
limit and then failing CREATE_SESSIONs (and hence mounts) completely,
start granting clients smaller slot tables as we approach the limit.
The factor chosen here is pretty much arbitrary.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFSv4.1+ client negotiates the size of its duplicate reply cache size
in the initial CREATE_SESSION request. The server preallocates the
memory for the duplicate reply cache to ensure that we'll never fail to
record the response to a nonidempotent operation.
To prevent a few CREATE_SESSIONs from consuming all of memory we set an
upper limit based on nr_free_buffer_pages(). 1/2^10 has been too
limiting in practice; 1/2^7 is still less than one percent.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These checks should have already be done centrally in
nfsd4_proc_compound, the checks in each individual operation are
unnecessary.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Obtain the clock rate from the clock framework if it's not available
through DT. The assumption is that the parent device (camera module)
defines the rate as clock control is a part of the power on and power off
sequences --- which are camera module specific.
Also use the clock rate from DT if no clock is provided.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The external clock frequency was set by the driver but the obtained
frequency was never verified. Do that.
Being able to obtain the exact frequency is important as the value is used
for PLL calculations which may result in frequencies that violate the PLL
tree limits.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The error handling code in smiapp_power_on() returned in case of a failed
I2C write instead of cleaning up the mess. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
ov13858 contained a 64-bit division. Use do_div() for calculating it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Previously, with crop (0, 0), (4255, 3167), VTS < 0xC9E was resulting in
blank frames sometimes. This appeared as video flickering. But we need VTS
< 0xC9E to get ~30fps.
Omni Vision recommends to use crop (0,8), (4255, 3159) for 4224x3136. With
this crop, VTS 0xC8E is supported and yields ~30fps.
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Calculate pixel-rate at run time instead of compile time.
Instead of using hardcoded pixels-per-line, extract it from current sensor
mode.
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Don't populate the array reset_seq on the stack, instead make it
static. Makes the object code smaller by over 50 bytes:
Before:
text data bss dec hex filename
11737 6000 64 17801 4589 drivers/media/i2c/ov2640.o
After:
text data bss dec hex filename
11582 6096 64 17742 454e drivers/media/i2c/ov2640.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The active and has_no_links arrays will overrun in
media_entity_pipeline_start() if there's an entity which has more than
MEDIA_ENTITY_MAX_PAD pads. Ensure in media_entity_init() that there are
fewer pads than that.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Replace the specification of a data structure by pointer dereferences
as the parameter for the operator "sizeof" to make size
determination a bit safer according to the Linux coding style convention.
This issue was detected by using the Coccinelle software.
[mchehab@s-opensource.com: merged similar patches]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Omit extra messages for memory allocation failures.
This issue was detected by using the Coccinelle software.
[mchehab@s-opensource.com: merged similar patches]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Previously, the sensor was not streaming after resume from suspend,
i.e. on S0->S3->S0 transition. Due to this, camera app preview appeared
as stuck.
Now, handle streaming state correctly in case of suspend-resume.
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Current v4l2 focus ctrl step value of 16, limits the minimum granularity
of focus positions to 16. Setting this value as 1, enables more accurate
focus positions.
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
devm_clk_get() may return different error codes other than -EPROBE_DEFER,
so it is better to return the real error code instead.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
v4l2_clk_get() may return different error codes other than -EPROBE_DEFER,
so it is better to return the real error code instead.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Previously, images were relatively darker due to non-optimal
settings for black target level and bias.
Now, use recommended settings for black target level and output bias
as default values. The same default settings apply to all the resolutions.
Given these recommeneded settings do not change dynamically, add these to
existing mode register settings.
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If you have a control handler that does not contain any controls, then
currently calling VIDIOC_G/S/TRY_EXT_CTRLS with count == 0 will return
-EINVAL in the class_check() function.
This is not correct, there is no reason why this should return an error.
The purpose of setting count to 0 is to test if the ioctl can mix controls
from different control classes. And this is possible. The fact that there
are not actually any controls defined is another matter that is unrelated
to this test.
This caused v4l2-compliance to fail, so that is fixed with this patch applied.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Only send HPD_LOW/HIGH event if the gpio actually changed value.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Make sure to check that we actually have an Interface Association
Descriptor before dereferencing it during probe to avoid dereferencing a
NULL-pointer.
Fixes: e0d3bafd02 ("V4L/DVB (10954): Add cx231xx USB driver")
Cc: stable <stable@vger.kernel.org> # 2.6.30
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This converts to use setup_timer() to set callback and data, though it
doesn't look like this would have worked with timer checking enabled
since no init_timer() was ever called before.
Cc: Mats Randgaard <matrandg@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for 10 and 12 bit luma formats.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Support the 10 and 12 bit luma formats.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Older compilers like gcc-4.6 may run into a case that returns
an uninitialized variable from rcar_drif_enable_rx() if that
function was ever called with an empty cur_ch_mask:
drivers/media/platform/rcar_drif.c:658:2: error: ‘ret’ may be used uninitialized in this function [-Werror=uninitialized]
Newer compilers don't have that problem as they optimize the
'ret' variable away and just return zero in that case.
This changes the function to return -EINVAL for this particular
failure, to make it consistent across all compiler versions.
In case gcc gets changed to report a warning for it in the
future, it's also a good idea to shut it up now.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82203
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>