The patch 'ip_gre: ipgre_tap device should keep dst' fixed
a issue that ipgre_tap mtu couldn't be updated in tx path.
The same fix is needed for ip6gre_tap as well.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without keeping dst, the tunnel will not update any mtu/pmtu info,
since it does not have a dst on the skb.
Reproducer:
client(ipgre_tap1 - eth1) <-----> (eth1 - ipgre_tap1)server
After reducing eth1's mtu on client, then perforamnce became 0.
This patch is to netif_keep_dst in gre_tap_init, as ipgre does.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2017-09-29
This series contains updates to i40e and i40evf only.
Jake provides several of the changes starting with the renaming of a
variable to clarify what the value is actually calculating. Found we
were misusing the __I40E_RECOVERY_PENDING bit to determine when we
should actually request a new IRQ in i40e_setup_misc_vector(), which
lead to a design mistake, so to resolve the issue, use a separate
state bit for miscellaneous IRQ setup and fix up the design while we
are at it. Cleaned up the old legacy PM support in the driver since
we support the newer generic PM callbacks. Fixed a failure to
hibernate issue, where on some platforms with a large number of CPUs,
we would allocate many IRQ vectors which we would try to migrate to
CPU0 when hibernating.
Sudheer cleans up a check for unqualified module inside i40e_up_complete()
because the link state information is in flux at time, so log messages
are getting logged with incorrect link state information. Also provided
additional log message cleanups and simplify member variable access in
the printing of the link messages.
Mariusz relaxes the firmware check since Fortville and Fort Park NICs
can and do have different firmware versions, so only warn for older
Fortville firmware. Fixed an errata with a flow director statistic that
was not wrapping as expected, simply reset after reading.
Mitch prevents consternation by lowering the log level to debug on a
message seen regularly on VF reset or unload, which is meaningless under
normal circumstances. Refactor the firmware version checking since
Fortville and Fort Park devices can have different firmware versions.
Alan fixes a ring to vector mapping, where the past implementation
attempted to map each Tx and Rx ring to its own vector, however we use
combined queues so we should be mapping the Tx/Rx rings together on one
vector. Adds the ability for the VF to request a different number of
queues allocated to it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The callers expect "panel" to be initialized, but that isn't true if we
return -ENODEV. It causes bugs like:
drivers/gpu/drm/tve200/tve200_drv.c:83 tve200_modeset_init()
error: uninitialized symbol 'panel'.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170925103038.lvr5msjvekwczctn@mwanda
The functions tve200_display_disable and tve200_display_funcs are
local to the source and do not need to be in global scope, so make
them static.
Cleans up sparse warnings:
symbol 'tve200_display_disable' was not declared. Should it be static?
symbol 'tve200_display_funcs' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922160516.16283-1-colin.king@canonical.com
The current shift of st->rx[2] left shifts a u8 24 bits left,
promotes the integer to a an int and then to a unsigned u64. If
the top bit of st->rx[2] is set then we end up with all the upper
bits being set to 1. Fix this by casting st->rx[2] to a u64 before
the 24 bit left shift.
Detected by CoverityScan CID#144940 ("Unintended sign extension")
Fixes: 2919fa54ef ("staging: iio: meter: new driver for ADE7759 devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Eight mostly minor fixes for recently discovered issues in drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=v2G5
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight mostly minor fixes for recently discovered issues in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ILLEGAL REQUEST + ASC==27 => target failure
scsi: aacraid: Add a small delay after IOP reset
scsi: scsi_transport_fc: Also check for NOTPRESENT in fc_remote_port_add()
scsi: scsi_transport_fc: set scsi_target_id upon rescan
scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse nlmsg properly
scsi: aacraid: error: testing array offset 'bus' after use
scsi: lpfc: Don't return internal MBXERR_ERROR code from probe function
scsi: aacraid: Fix 2T+ drives on SmartIOC-2000
Audio subsystem clocks configuration is a part of audio block,
so there it should be moved to exynos5422-odroidxu3-audio.dtsi
to avoid it on Odroid XU4, which has no audio codec.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Odroid U3 (Exynos 4412 based) for instance needs this driver,
otherwise its USB hub will not come up.
Also selecting it as built-in to allow booting from USB without
an initrd/initramfs.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Drivers that use the start method for netlink dumping rely on dumpit not
being called if start fails. For example, ila_xlat.c allocates memory
and assigns it to cb->args[0] in its start() function. It might fail to
do that and return -ENOMEM instead. However, even when returning an
error, dumpit will be called, which, in the example above, quickly
dereferences the memory in cb->args[0], which will OOPS the kernel. This
is but one example of how this goes wrong.
Since start() has always been a function with an int return type, it
therefore makes sense to use it properly, rather than ignoring it. This
patch thus returns early and does not call dumpit() when start() fails.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
since 9bddeb2a5b "blk-mq: make per-sw-queue bio merge as default .bio_merge"
there is no caller for this function.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
checkpatch started to report unnamed arguments in function pointer
definitions. Add the corresponding names to these definitions to avoid this
warning.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The check on len is redundant as it is always greater than 1,
so just remove it and make the printk less complex.
Detected by CoverityScan, CID#1226729 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So far we've been relying on sockopt(SOL_IP, IP_FREEBIND) being usable
even on IPv6 sockets.
However, it turns out it is perfectly reasonable to want to set freebind
on an AF_INET6 SOCK_RAW socket - but there is no way to set any SOL_IP
socket option on such a socket (they're all blindly errored out).
One use case for this is to allow spoofing src ip on a raw socket
via sendmsg cmsg.
Tested:
built, and booted
# python
>>> import socket
>>> SOL_IP = socket.SOL_IP
>>> SOL_IPV6 = socket.IPPROTO_IPV6
>>> IP_FREEBIND = 15
>>> IPV6_FREEBIND = 78
>>> s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM, 0)
>>> s.getsockopt(SOL_IP, IP_FREEBIND)
0
>>> s.getsockopt(SOL_IPV6, IPV6_FREEBIND)
0
>>> s.setsockopt(SOL_IPV6, IPV6_FREEBIND, 1)
>>> s.getsockopt(SOL_IP, IP_FREEBIND)
1
>>> s.getsockopt(SOL_IPV6, IPV6_FREEBIND)
1
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NS for DAD are sent on admin up as long as a valid qdisc is found.
A race condition exists by which these packets will not egress the
interface if the operational state of the lower device is not yet up.
The solution is to delay DAD until the link is operationally up
according to RFC2863. Rather than only doing this, follow the existing
code checks by deferring IPv6 device initialization altogether. The fix
allows DAD on devices like tunnels that are controlled by userspace
control plane. The fix has no impact on regular deployments, but means
that there is no IPv6 connectivity until the port has been opened in
the case of port-based network access control, which should be
desirable.
Signed-off-by: Mike Manning <mmanning@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Newly discovered species of fujitsu laptops break some assumptions about
ACPI device pairings.
fujitsu-laptop:
- Don't oops when FUJ02E3 is not presnt
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZzv7uAAoJEKbMaAwKp364tqUH/iniXL3ZeObv+l0zK/QaPI0y
TR9fEHm73/jtScVokoM79Py+G7c/xP9OEz4yHxD2kQphA+ah3Z4O6jtxDB2pMZlP
W5JQrIwcuWgvh3xEMGSJ4gmvYU7vi5AKm9PGHEydwlQdhDPfIwQhVOqDNnpVIR4E
dU3ydgLk9+nIRhgsfNJi2UyzrwDlKgtOXHX9l4EXP5tQbxxVw2ET3BFtoq2gUkBs
u6/WV0FH9jkxb56Wn+Mr2vAy4M2X2Mxe+88vA8DvE8H1gzMPGxFIxP4/036o+2M0
+df4txjOVy5J4w+SuAcKAv7Kp3m50nnQh4LyKjvfWmnMKCCzkXobNbZwnxIWvKo=
=tsgS
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.14-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform drivers fix from Darren Hart:
"Newly discovered species of fujitsu laptops break some assumptions
about ACPI device pairings.
fujitsu-laptop: Don't oops when FUJ02E3 is not present"
* tag 'platform-drivers-x86-v4.14-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: fujitsu-laptop: Don't oops when FUJ02E3 is not presnt
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=swPa
-----END PGP SIGNATURE-----
Merge tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
"Four fixes for the as3645a LED flash controller and one update to
MAINTAINERS"
* tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
MAINTAINERS: Add entry for MediaTek PMIC LED driver
as3645a: Unregister indicator LED on device unbind
as3645a: Use integer numbers for parsing LEDs
dt: bindings: as3645a: Use LED number to refer to LEDs
as3645a: Use ams,input-max-microamp as documented in DT bindings
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.
Use devm_device_add_group instead of sysfs_create_group and remove the
action that cleans the sysfs file when exiting the driver.
Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.
Use devm_device_add_group instead of sysfs_create_group and remove the
relative sysfs_remove_group and goto label.
Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.
Use devm_device_add_group instead of sysfs_create_group and remove the
relative sysfs_remove_group.
Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.
Use devm_device_add_group instead of sysfs_create_group and remove the
action that cleans the sysfs file when exiting the driver.
Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.
Use devm_device_add_group instead of sysfs_create_group and remove the
action that cleans the sysfs file when exiting the driver.
Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.
Use devm_device_add_group instead of sysfs_create_group and remove the
action that cleans the sysfs file when exiting the driver.
Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.
Use devm_device_add_group instead of sysfs_create_group and remove the
action that cleans the sysfs file when exiting the driver.
Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On x86 we historically used falling edge interrupts in the driver
because that's how first Chrome devices were configured. They also
did not use ACPI to enumerate I2C devices (because back then there
was no kernel support for that), so trigger was hard-coded in the
driver. However the controller behavior is much more reliable if
we use level triggers, and that is how we configured ARM devices,
and how want to configure newer x86 devices as well. All newer
x86 boxes have their I2C devices enumerated in ACPI.
Let's see if platform code (ACPI, DT) described interrupt and
specified particular trigger type, and if so, let's use it instead
of always clobbering trigger with IRQF_TRIGGER_FALLING. We will
still use this trigger type as a fallback if platform code left
interrupt trigger unconfigured.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196761
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
My Fujitsu-Siemens Lifebook S6120 doesn't have the FUJ02E3 device,
but it does have FUJ02B1. That means we do register the backlight
device (and it even seems to work), but the code will oops as soon
as we try to set the backlight brightness because it's trying to
call call_fext_func() with a NULL device. Let's just skip those
function calls when the FUJ02E3 device is not present.
Cc: Jonathan Woithe <jwoithe@just42.net>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # 4.13.x
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
* clk-pm-runtime:
clk: samsung: exynos-audss: Add support for runtime PM
clk: samsung: exynos-audss: Use local variable for controller's device
clk: samsung: exynos5433: Add support for runtime PM
clk: samsung: Add support for runtime PM
clk: Add support for runtime PM
There are a couple interface issues which can be addressed in cgroup2
interface.
* Stats from cpuacct being reported separately from the cpu stats.
* Use of different time units. Writable control knobs use
microseconds, some stat fields use nanoseconds while other cpuacct
stat fields use centiseconds.
* Control knobs which can't be used in the root cgroup still show up
in the root.
* Control knob names and semantics aren't consistent with other
controllers.
This patchset implements cpu controller's interface on cgroup2 which
adheres to the controller file conventions described in
Documentation/cgroups/cgroup-v2.txt. Overall, the following changes
are made.
* cpuacct is implictly enabled and disabled by cpu and its information
is reported through "cpu.stat" which now uses microseconds for all
time durations. All time duration fields now have "_usec" appended
to them for clarity.
Note that cpuacct.usage_percpu is currently not included in
"cpu.stat". If this information is actually called for, it will be
added later.
* "cpu.shares" is replaced with "cpu.weight" and operates on the
standard scale defined by CGROUP_WEIGHT_MIN/DFL/MAX (1, 100, 10000).
The weight is scaled to scheduler weight so that 100 maps to 1024
and the ratio relationship is preserved - if weight is W and its
scaled value is S, W / 100 == S / 1024. While the mapped range is a
bit smaller than the orignal scheduler weight range, the dead zones
on both sides are relatively small and covers wider range than the
nice value mappings. This file doesn't make sense in the root
cgroup and isn't created on root.
* "cpu.weight.nice" is added. When read, it reads back the nice value
which is closest to the current "cpu.weight". When written, it sets
"cpu.weight" to the weight value which matches the nice value. This
makes it easy to configure cgroups when they're competing against
threads in threaded subtrees.
* "cpu.cfs_quota_us" and "cpu.cfs_period_us" are replaced by "cpu.max"
which contains both quota and period.
v4: - Use cgroup2 basic usage stat as the information source instead
of cpuacct.
v3: - Added "cpu.weight.nice" to allow using nice values when
configuring the weight. The feature is requested by PeterZ.
- Merge the patch to enable threaded support on cpu and cpuacct.
- Dropped the bits about getting rid of cpuacct from patch
description as there is a pretty strong case for making cpuacct
an implicit controller so that basic cpu usage stats are always
available.
- Documentation updated accordingly. "cpu.rt.max" section is
dropped for now.
v2: - cpu_stats_show() was incorrectly using CONFIG_FAIR_GROUP_SCHED
for CFS bandwidth stats and also using raw division for u64.
Use CONFIG_CFS_BANDWITH and do_div() instead. "cpu.rt.max" is
not included yet.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Make the following changes in preparation for the cpu controller
interface implementation for cgroup2. This patch doesn't cause any
functional differences.
* s/cpu_stats_show()/cpu_cfs_stat_show()/
* s/cpu_files/cpu_legacy_files/
v2: Dropped cpuacct changes as it won't be used by cpu controller
interface anymore.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
some register errors and some clocks that should be critical
for safe usage.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlnBVUoQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgTqVB/4p1YFdcTtegPRISCuxHxGo+82Mt4RANWnn
S9ehHNQd2/WRTqFAdI16sjAxE+opzo9ORBEAsHnocsq7IRAokYvpHWR41d25QLdA
dwCiwBPbNJbp8lpgir1x0d8WZ2KbeIP0KUVNvh2AHX2eRBpXcpXfpklC12v9dkVO
JVFfPWKeiT57PKvdpaXkAdTfF/uBaCwe436jfZCy/HUTICuj9/uSYz1ssdFe1/Lj
BuT2Gk+kSgv9b7bjTOmnDEWcloNRHi/2WrEThKQE4T2+QEMzsAhgAKNjQJyD0lWC
WDxFMEi3b7oXuzgM7I33OwjnSDFn7BUXJ3yu1hXhCaTkAAiq4UsW
=3tp4
-----END PGP SIGNATURE-----
Merge tag 'v4.14-rockchip-clkfixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes
Pull Rockchip clk driver fixes from Heiko Stuebner:
Some smallish fixes for the rk3128 clock support including
some register errors and some clocks that should be critical
for safe usage.
* tag 'v4.14-rockchip-clkfixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: add sclk_timer5 as critical clock on rk3128
clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs error
clk: rockchip: add pclk_pmu as critical clock on rk3128
Pull waitid fix from Al Viro:
"Fix infoleak in waitid()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix infoleak in waitid(2)
Pull btrfs fixes from David Sterba:
"We've collected a bunch of isolated fixes, for crashes, user-visible
behaviour or missing bits from other subsystem cleanups from the past.
The overall number is not small but I was not able to make it
significantly smaller. Most of the patches are supposed to go to
stable"
* 'for-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: log csums for all modified extents
Btrfs: fix unexpected result when dio reading corrupted blocks
btrfs: Report error on removing qgroup if del_qgroup_item fails
Btrfs: skip checksum when reading compressed data if some IO have failed
Btrfs: fix kernel oops while reading compressed data
Btrfs: use btrfs_op instead of bio_op in __btrfs_map_block
Btrfs: do not backup tree roots when fsync
btrfs: remove BTRFS_FS_QUOTA_DISABLING flag
btrfs: propagate error to btrfs_cmp_data_prepare caller
btrfs: prevent to set invalid default subvolid
Btrfs: send: fix error number for unknown inode types
btrfs: fix NULL pointer dereference from free_reloc_roots()
btrfs: finish ordered extent cleaning if no progress is found
btrfs: clear ordered flag on cleaning up ordered extents
Btrfs: fix incorrect {node,sector}size endianness from BTRFS_IOC_FS_INFO
Btrfs: do not reset bio->bi_ops while writing bio
Btrfs: use the new helper wbc_to_write_flags
Pull MD fixes from Shaohua Li:
"A few fixes for MD. Mainly fix a problem introduced in 4.13, which we
retry bio for some code paths but not all in some situations"
* tag 'md/4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/raid5: cap worker count
dm-raid: fix a race condition in request handling
md: fix a race condition for flush request handling
md: separate request handling
The i40e driver now supports two different devices with two different
firmware versions. So be smart about how we handle these. Move the FW
version macros to the appropriate header file, and add a convenience
macro that checks the version based on the device. Then use this macro
to check whether or not the driver can use the new link info API.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently the PF allocates a default number of queues for each VF and
cannot be changed. This patch enables the VF to request a different
number of queues allocated to it. This patch also adds a new virtchnl
op and capability flag to facilitate this negotiation.
After the PF receives a request message, it will set a requested number
of queues for that VF. Then when the VF resets, its VSI will get a new
number of queues allocated to it.
This is a best effort request and since we only allocate a guaranteed
default number, if the VF tries to ask for more than the guaranteed
number, there may not be enough in HW to accommodate it unless other
queues for other VFs are freed. It should also be noted decreasing the
number queues allocated to a VF to below the default will NOT enable the
allocation of more than 32 VFs per PF and will not free queues guaranteed
to each VF by default.
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The current implementation for mapping queues to vectors is broken
because it attempts to map each Tx and Rx ring to its own vector,
however we use combined queues so we should actually be mapping the
Tx/Rx rings together on one vector.
Also in the current implementation, in the case where we have more
queues than vectors, we attempt to group the queues together into
'chunks' and map each 'chunk' of queues to a vector. Chunking them
together would be more ideal if, and only if, we only had RSS because of
the way the hashing algorithm works but in the case of a future patch
that enables VF ADq, round robin assignment is better and still works
with RSS.
This patch resolves both those issues and simplifies the code needed to
accomplish this. Instead of treating the case where we have more queues
than vectors as special, if we notice our vector index is greater than
vectors, reset the vector index to zero and continue mapping. This
should ensure that in both cases, whether we have enough vectors for
each queue or not, the queues get appropriately mapped.
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
On some platforms with a large number of CPUs, we will allocate many IRQ
vectors. When hibernating, the system will attempt to migrate all of the
vectors back to CPU0 when shutting down all the other CPUs. It is
possible that we have so many vectors that it cannot re-assign them to
CPU0. This is even more likely if we have many devices installed in one
platform.
The end result is failure to hibernate, as it is not possible to
shutdown the CPUs. We can avoid this by disabling MSI-X and clearing our
interrupt scheme when the device is suspended. A more ideal solution
would be some method for the stack to properly handle this for all
drivers, rather than on a case-by-case basis for each driver to fix
itself.
However, until this more ideal solution exists, we can do our part and
shutdown our IRQs during suspend, which should allow systems with
a large number of CPUs to safely suspend or hibernate.
It may be worth investigating if we should shut down even further when
we suspend as it may make the path cleaner, but this was the minimum fix
for the hibernation issue mentioned here.
Testing-hints:
This affects systems with a large number of CPUs, and with multiple
devices enabled. Without this change, those platforms are unable to
hibernate at all.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Although the service task does check the suspended status before
running, it might already be part way through running when we go to
suspend. Lets ensure that the service task is stopped and will not be
restarted again until we finish resuming. This ensures that service task
code does not cause strange interactions with the suspend/resume
handlers.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When handling suspend and resume callbacks we want to make sure that (a)
we don't suspend again if we're already suspended and (b) we don't
resume again if we're already resuming. Lets make sure we test_and_set
the __I40E_SUSPENDED bit in i40e_suspend which ensures that a suspend
call when already suspended will exit early. Additionally, if
__I40E_SUSPENDED is not set when we begin resuming, exit early as well.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Stop using the old legacy PM support, since we now have stable support
for the newer generic PM callbacks.
This has several advantages. First, we no longer have to manage our
own pci_save_state() and power changes, as it's preferred to have the
PCI stack do this. Second, these routines get called for both hibernate
and suspend to ram, so we can have the driver properly handle all the
suspend/resume flows that it needs to.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
We currently (mis)use the __I40E_RECOVERY_PENDING bit to determine when
we should actually request a new IRQ in i40e_setup_misc_vector().
This led to a design mistake where we open-coded the re-setup of the
miscellaneous vector in i40e_resume() instead of using the function
provided. If we did not open-code this and instead tried to use the
i40e_setup_misc_vector() function, it would lead to never reallocating
the IRQ.
This would lead to a second i40e_suspend() call failing to free the
vector due to a NULL pointer dereference.
A future patch is going to re-work how the i40e_suspend() and
i40e_resume() flows work to clear all IRQ vectors, which would require
us to use i40e_setup_misc_vector() directly. Since during this time the
__I40E_RECOVERY_PENDING bit is set, we'll never re-allocate the vector.
Rather than leaving the open-coded setup in i40e_resume() lets just fix
the problem properly in i40e_setup_misc_vector().
Introduce a new state bit which indicates when the IRQ has been
assigned, which will be set when i40e_setup_misc_vector is first called.
This ultimately resolves the issue of re-requesting the vector, without
overloading the __I40E_RECOVERY_PENDING state. This ensures that the
suspend/resume cycle can use the setup function instead of open-coding
the re-request during resume.
Additionally, since the only callers of i40e_stop_misc_vector also want
to free it, move this code directly into the function to avoid
duplication. Due to the new functionality, rename it to
i40e_free_misc_vector().
This lets us drop the extra calls to free and re-enable the vector
during i40e_suspend() and i40e_resume(). We don't need to call
i40e_setup_misc_Vector() in i40e_resume() because it gets called by the
i40e_rebuild() call.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
We see this message regularly on VF reset or unload (which invokes a
reset). It's essentially meaningless unless it's happening constantly.
To prevent consternation, lower the log level to debug so it's not seen
under normal circumstance.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
An errata with GLQF_PCNT causes it to not wrap as expected. This
can cause an error in flow director statistics. This patch resets
affected counters just after reading.
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fortville and Fort Park devices are often on different firmware release
schedules. This change relaxes the minor version warning message,
so it is only displayed for older FW warning version for old
firmware Fortville 3 or earlier.
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>