Commit graph

932,869 commits

Author SHA1 Message Date
Niranjana Vishwanathapura
b77eb45e0d IB/opa_vnic: Properly return the total MACs in UC MAC list
Do not include EM specified MAC address in total MACs of the
UC MAC list.

Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:21:57 -04:00
Niranjana Vishwanathapura
5a5a85da40 IB/opa_vnic: Allow reset of MAC address
Ensure MAC address is reset while deleting the vesw port.

Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:21:57 -04:00
Niranjana Vishwanathapura
7f291d2869 IB/opa_vnic: Set POD value for Ethernet MTU
Set power on default value of 1500 for eth_mtu.

Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:21:57 -04:00
Niranjana Vishwanathapura
62f1e84e46 IB/opa_vnic: Mark unused Ethernet MTU fields as reserved
Per pcp mtu fields are not used, mark them as reserved.

Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:21:57 -04:00
Harish Chegondi
828bcbdc97 IB/hfi1: Unsuccessful PCIe caps tuning should not fail driver load
Failure to tune PCIe capabilities should not fail driver load. This can
cause the driver load to fail on systems with any of the following:
1. HFI's parent is not root. Example: HFI card is behind a PCIe bridge.
2. HFI's parent is not PCI Express capable.
In these situations, failure to tune PCIe capabilities should be logged
in the system message logs but not cause the driver load to fail.

This patch also ensures pcie capability word DevCtl is written only
after a successful read and the capability tuning process continues
even if read/write of the pcie capability word DevCtl fails.

Fixes: c53df62c7a ("IB/hfi1: Check return values from PCI config API calls")
Fixes: bf70a77577 ("staging/rdma/hfi1: Enable WFR PCIe extended tags from the driver")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:10:36 -04:00
Michael J. Ruhl
b8f42738ac IB/hfi1: On error, fix use after free during user context setup
During base context setup, if setup_base_ctxt() fails, the context is
deallocated. This is incorrect because the context is referenced on
return, to notify any waiting subcontext.  If there are no subcontexts
the pointer will be invalid.

Reorganize the error path so that deallocate_ctxt() is called after all
the possible subcontexts have been notified.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:10:36 -04:00
Alex Estrin
612601d001 Revert "IB/ipoib: Update broadcast object if PKey value was changed in index 0"
commit 9a9b811269 will cause core to fail UD QP from being destroyed
on ipoib unload, therefore cause resources leakage.
On pkey change event above patch modifies mgid before calling underlying
driver to detach it from QP. Drivers' detach_mcast() will fail to find
modified mgid it was never given to attach in a first place.
Core qp->usecnt will never go down, so ib_destroy_qp() will fail.

IPoIB driver actually does take care of new broadcast mgid based on new
pkey by destroying an old mcast object in ipoib_mcast_dev_flush())
....
	if (priv->broadcast) {
		rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree);
		list_add_tail(&priv->broadcast->list, &remove_list);
		priv->broadcast = NULL;
	}
...

then in restarted ipoib_macst_join_task() creating a new broadcast mcast
object, sending join request and on completion tells the driver to attach
to reinitialized QP:
...
if (!priv->broadcast) {
...
	broadcast = ipoib_mcast_alloc(dev, 0);
...
	memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
	       sizeof (union ib_gid));
	priv->broadcast = broadcast;
...

Fixes: 9a9b811269 ("IB/ipoib: Update broadcast object if PKey value was changed in index 0")
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:10:36 -04:00
Kamenee Arumugam
09592af5fd IB/hfi1: Return correct value in general interrupt handler
The general interrupt handler returns IRQ_HANDLED whether an IRQ
was handled or not.
Determine if an IRQ was handled and return the correct value.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:10:36 -04:00
Jan Sokolowski
753b19afb1 IB/hfi1: Check eeprom config partition validity
Relying on a trailing magic value is incorrect. There are instances where
this is not present as trailing magic value has a specific purpose which is
not partition validation. Instead use the header magic value which is
present in all variants of the platform configuration and is intended for
validation. This is also used in other locations in the driver.

Fixes: bc5214ee29 (IB/hfi1: Handle missing magic values in config file)
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:10:36 -04:00
Sebastian Sanchez
30e10527bc IB/hfi1: Only reset QSFP after link up and turn off AOC TX
QSFP reset enables AOC transmitters by default. They should be off
before moving to high power mode to complete the setup. There is no
need to reset the QSFP during LNI failure as it was reset at link down.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:10:36 -04:00
Sebastian Sanchez
df5efdd970 IB/hfi1: Turn off AOC TX after offline substates
Offline.quietDuration was added in the 8051 firmware, and the driver
only turns off the AOC transmitters when offline.quiet is reached.
However, the AOC transmitters need to be turned off at the new state.
Therefore, turn off the AOC transmitters at any offline substates
including offline.quiet and offline.quietDuration, then recheck we
reached offline.quiet to support backwards compatibility.

Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 11:10:36 -04:00
Robin Murphy
973f5fbedb iommu/iova: Simplify cached node logic
The logic of __get_cached_rbnode() is a little obtuse, but then
__get_prev_node_of_cached_rbnode_or_last_node_and_update_limit_pfn()
wouldn't exactly roll off the tongue...

Now that we have the invariant that there is always a valid node to
start searching downwards from, everything gets a bit easier to follow
if we simplify that function to do what it says on the tin and return
the cached node (or anchor node as appropriate) directly. In turn, we
can then deduplicate the rb_prev() and limit_pfn logic into the main
loop itself, further reduce the amount of code under the lock, and
generally make the inner workings a bit less subtle.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27 17:09:58 +02:00
Robin Murphy
bb68b2fbfb iommu/iova: Add rbtree anchor node
Add a permanent dummy IOVA reservation to the rbtree, such that we can
always access the top of the address space instantly. The immediate
benefit is that we remove the overhead of the rb_last() traversal when
not using the cached node, but it also paves the way for further
simplifications.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27 17:09:57 +02:00
Zhen Lei
aa3ac9469c iommu/iova: Make dma_32bit_pfn implicit
Now that the cached node optimisation can apply to all allocations, the
couple of users which were playing tricks with dma_32bit_pfn in order to
benefit from it can stop doing so. Conversely, there is also no need for
all the other users to explicitly calculate a 'real' 32-bit PFN, when
init_iova_domain() can happily do that itself from the page granularity.

CC: Thierry Reding <thierry.reding@gmail.com>
CC: Jonathan Hunter <jonathanh@nvidia.com>
CC: David Airlie <airlied@linux.ie>
CC: Sudeep Dutt <sudeep.dutt@intel.com>
CC: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
[rm: use iova_shift(), rewrote commit message]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27 17:09:57 +02:00
Robin Murphy
e60aa7b538 iommu/iova: Extend rbtree node caching
The cached node mechanism provides a significant performance benefit for
allocations using a 32-bit DMA mask, but in the case of non-PCI devices
or where the 32-bit space is full, the loss of this benefit can be
significant - on large systems there can be many thousands of entries in
the tree, such that walking all the way down to find free space every
time becomes increasingly awful.

Maintain a similar cached node for the whole IOVA space as a superset of
the 32-bit space so that performance can remain much more consistent.

Inspired by work by Zhen Lei <thunder.leizhen@huawei.com>.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27 17:09:57 +02:00
Zhen Lei
086c83acb7 iommu/iova: Optimise the padding calculation
The mask for calculating the padding size doesn't change, so there's no
need to recalculate it every loop iteration. Furthermore, Once we've
done that, it becomes clear that we don't actually need to calculate a
padding size at all - by flipping the arithmetic around, we can just
combine the upper limit, size, and mask directly to check against the
lower limit.

For an arm64 build, this alone knocks 20% off the object code size of
the entire alloc_iova() function!

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
[rm: simplified more of the arithmetic, rewrote commit message]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27 17:09:56 +02:00
Zhen Lei
2070f940a6 iommu/iova: Optimise rbtree searching
Checking the IOVA bounds separately before deciding which direction to
continue the search (if necessary) results in redundantly comparing both
pfns twice each. GCC can already determine that the final comparison op
is redundant and optimise it down to 3 in total, but we can go one
further with a little tweak of the ordering (which makes the intent of
the code that much cleaner as a bonus).

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
[rm: rewrote commit message to clarify]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27 17:09:56 +02:00
Markus Elfring
8834b09501 clk: samsung: Delete a memory allocation error message in clk-cpu.c
Omit an extra message for a memory allocation failure
in exynos_register_cpu_clock() function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-09-27 17:06:18 +02:00
Jean-Philippe Brucker
50ce6312f2 iommu: Fix comment for iommu_ops.map_sg
The definition of map_sg was split during a recent addition to iommu_ops.
Put it back together.

Fixes: add02cfdc9 ("iommu: Introduce Interface for IOMMU TLB Flushing")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27 17:02:45 +02:00
Arvind Yadav
3c6bae6213 iommu/amd: pr_err() strings should end with newlines
pr_err() messages should end with a new-line to avoid other messages
being concatenated. So replace '/n' with '\n'.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Fixes: 45a01c4293 ('iommu/amd: Add function copy_dev_tables()')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27 17:01:35 +02:00
Yong Wu
1ff9b17ced iommu/mediatek: Limit the physical address in 32bit for v7s
The ARM short descriptor has already limited the physical address
to 32bit after the commit <7655739143> ("iommu/io-pgtable: Sanitise
map/unmap addresses"). But in MediaTek 4GB mode, the physical address
is from 0x1_0000_0000 to 0x1_ffff_ffff. this will cause:

WARNING: CPU: 4 PID: 3900 at
xxx/drivers/iommu/io-pgtable-arm-v7s.c:482 arm_v7s_map+0x40/0xf8
Modules linked in:

CPU: 4 PID: 3900 Comm: weston Tainted: G S      W       4.9.44 #1
Hardware name: MediaTek MT2712m1v1 board (DT)
task: ffffffc0eaa5b280 task.stack: ffffffc0e9858000
PC is at arm_v7s_map+0x40/0xf8
LR is at mtk_iommu_map+0x64/0x90
pc : [<ffffff80085b09e8>] lr : [<ffffff80085b29fc>] pstate: 000001c5
sp : ffffffc0e985b920
x29: ffffffc0e985b920 x28: 0000000127d00000
x27: 0000000000100000 x26: ffffff8008f9e000
x25: 0000000000000003 x24: 0000000000100000
x23: 0000000127d00000 x22: 00000000ff800000
x21: ffffffc0f7ec8ce0 x20: 0000000000000003
x19: 0000000000000003 x18: 0000000000000002
x17: 0000007f7e5d72c0 x16: ffffff80082b0f08
x15: 0000000000000001 x14: 000000000000003f
x13: 0000000000000000 x12: 0000000000000028
x11: 0088000000000000 x10: 0000000000000000
x9 : ffffff80092fa000 x8 : ffffffc0e9858000
x7 : ffffff80085b29d8 x6 : 0000000000000000
x5 : ffffff80085b09a8 x4 : 0000000000000003
x3 : 0000000000100000 x2 : 0000000127d00000
x1 : 00000000ff800000 x0 : 0000000000000001
...
Call trace:
[<ffffff80085b09e8>] arm_v7s_map+0x40/0xf8
[<ffffff80085b29fc>] mtk_iommu_map+0x64/0x90
[<ffffff80085ab5f8>] iommu_map+0x100/0x3a0
[<ffffff80085ab99c>] default_iommu_map_sg+0x104/0x168
[<ffffff80085aead8>] iommu_dma_alloc+0x238/0x3f8
[<ffffff8008098b30>] __iommu_alloc_attrs+0xa8/0x260
[<ffffff80085f364c>] mtk_drm_gem_create+0xac/0x180
[<ffffff80085f3894>] mtk_drm_gem_dumb_create+0x54/0xc8
[<ffffff80085d576c>] drm_mode_create_dumb_ioctl+0xa4/0xd8
[<ffffff80085cb2a0>] drm_ioctl+0x1c0/0x490

In order to satify this, Limit the physical address to 32bit.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27 16:58:28 +02:00
Doug Ledford
1848757c3d Merge branches 'hns' and 'misc' into k.o/for-next
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 10:58:06 -04:00
Yong Wu
5c62c1c679 iommu/io-pgtable-arm-v7s: Need dma-sync while there is no QUIRK_NO_DMA
Fix the commit 81b3c25218 ("iommu/io-pgtable: Introduce explicit
coherency"). If there is no IO_PGTABLE_QUIRK_NO_DMA, we should call
dma_sync_single_for_device for cache synchronization.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Fixes: 81b3c25218 ('iommu/io-pgtable: Introduce explicit coherency')
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27 16:56:17 +02:00
Bharat Potnuri
4d45b7573b iw_cxgb4: change pr_debug to appropriate log level
Error logs of iw_cxgb4 needs to be printed by default. This patch
changes the necessary pr_debug() to appropriate pr_<log level>.

Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 10:13:15 -04:00
Bharat Potnuri
548ddb19af iw_cxgb4: Remove __func__ parameter from pr_debug()
pr_debug() can be enabled to print function names, So removing the
unwanted __func__ parameters from debug logs.
Realign function parameters.

Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 10:13:14 -04:00
Arvind Yadav
44596ebf8d IB/ocrdma: pr_err() strings should end with newlines
pr_err() messages should end with a new-line to avoid other messages
being concatenated.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 10:13:14 -04:00
Petr Mladek
83b31c2a5f pinctrl/amd: Fix build dependency on pinmux code
The commit 79d2c8bede ("pinctrl/amd: save pin registers over
suspend/resume") caused the following compilation errors:

drivers/pinctrl/pinctrl-amd.c: In function ‘amd_gpio_should_save’:
drivers/pinctrl/pinctrl-amd.c:741:8: error: ‘const struct pin_desc’ has no member named ‘mux_owner’
  if (pd->mux_owner || pd->gpio_owner ||
        ^
drivers/pinctrl/pinctrl-amd.c:741:25: error: ‘const struct pin_desc’ has no member named ‘gpio_owner’
  if (pd->mux_owner || pd->gpio_owner ||

We need to enable CONFIG_PINMUX for this driver as well.

Cc: stable@vger.kernel.org
Fixes: 79d2c8bede ("pinctrl/amd: save pin registers over suspend/resume")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-27 15:50:11 +02:00
Gregory CLEMENT
73ae5fe8a5 arm64: dts: marvell: add NAND support on the 7040-DB board
The NAND controller used in A7K/A8K is present on the CP110 master part.
It is compatible with the pxa3xx_nand driver but requires the use of the
marvell,armada-8k-nand compatible string due to the need to first enable
the NAND controller.

Add properties to the NAND node to fit the bindings constraints of the
pxa3xx_nand driver and enable the NAND controller.

Add the 'marvell,system-controller' property to the cp110 master NAND
node with a reference to the syscon node. This is new compared to other
boards using the pxa3xx_nand driver and it is needed to be bootloader
independent and enable the NAND controller from the NAND controller
driver itself by writing in these syscon registers.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
[miquel.raynal@free-electrons.com: add NAND ready/busy MPP subnode,
change compatible string to fit the needs of the A7k/A8k SoCs and add
the system controller property]
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
2017-09-27 15:34:01 +02:00
Chris Gorman
505485a83c pinctrl: cherryview fixed typo in comment
Fixed typo on comment for north_community.

Signed-off-by: Chris Gorman <chrisjohgorman@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-27 15:30:36 +02:00
Arvind Yadav
d23a8bafa9 IB/mlx5:: pr_err() and mlx5_ib_dbg() strings should end with newlines
pr_err() and mlx5_ib_dbg( messages should terminated with a new-line to
avoid other messages being concatenated.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 09:17:52 -04:00
Yuval Shaia
e4b2d06892 IB/ipoib: Remove device when one port fails to init
Call ipoib_remove_one when one of the IPoIB ports fails to initialize in
order not to leave the module in unstable state.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 09:17:51 -04:00
Colin Ian King
3e4d6f91ca RDMA/cxgb3: remove redundant first assignement of sqp
sqp is being initialised when it is being declared and then updated
a little later on making the first initialization redundant. Clean
this up by initializing ptr and sqp at their declaration.

Cleans up warning: "warning: Value stored to 'sqp' during its
initialization is never read"

Fixes: a58e58fafd ("RDMA/cxgb3: Wrap the software send queue pointer as needed on flush")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:54:19 -04:00
Arnd Bergmann
40a203396c IB/uverbs: clean up INIT_UDATA() macro usage
After changing INIT_UDATA_BUF_OR_NULL() to an inline function,
this does the same change to INIT_UDATA for consistency.
I'm keeping it separate as this part is much larger and
we wouldn't want to backport this to stable kernels if we
ever want to address the gcc warnings by backporting the
first patch.

Again, using an inline function gives us better type
safety here among other issues with macros. I'm using
u64_to_user_ptr() to convert the user pointer to simplify
the logic rather than adding lots of new type casts.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:54:19 -04:00
Arnd Bergmann
12f727721e IB/uverbs: clean up INIT_UDATA_BUF_OR_NULL usage
We get a harmless warning about the fact that we use the result of a
multiplication as a condition:

drivers/infiniband/core/uverbs_main.c: In function 'ib_uverbs_write':
drivers/infiniband/core/uverbs_main.c:787:40: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
drivers/infiniband/core/uverbs_main.c:787:117: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
drivers/infiniband/core/uverbs_main.c:790:50: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
drivers/infiniband/core/uverbs_main.c:790:151: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]

This avoids the problem by using an inline function in place of
the macro.

Fixes: a96e4e2ffe ("IB/uverbs: New macro to set pointers to NULL if length is 0 in INIT_UDATA()")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://patchwork.kernel.org/patch/9940777/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:54:19 -04:00
Yuval Shaia
be92d4891f IB/{cxgb3,cxgb4}: Remove unneeded config dependencies
CHELSIO_T3 already depend on INET
CHELSIO_T4 already depend on (IPV6 || IPV6=n)

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:54:19 -04:00
Yuval Shaia
931bc0d916 IB: Move PCI dependency from root KConfig to HW's KConfigs
No reason to have dependency on PCI for the entire infiniband stack so
move it to KConfig of only the drivers that actually using PCI.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:54:19 -04:00
Colin Ian King
8f63d4b1d5 IB/core: fix spelling mistake: "aceess" -> "access"
Trivial fix to spelling mistake in WARN message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:54:19 -04:00
Wei Hu(Xavier)
400d324a14 RDMA/hns: Delete the unnecessary initializing enum to zero
It deletes the unnecessary initializing enum to zero.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:37:46 -04:00
Wei Hu(Xavier)
78928a17ca RDMA/hns: Fix inconsistent warning
This patch fixes smatch inconsistent warning as below:
drivers/infiniband/hw/hns/hns_roce_hem.h:136 hns_roce_hem_first() warn: inconsistent indenting

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Wei Hu(Xavier)
5caad67cb3 RDMA/hns: Replace condition statement using hardware version information
This patch replaces condition statement to reduce usage of hardware version
information in common driver.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Wei Hu(Xavier)
08eb3018b6 RDMA/hns: Add releasing resource operation in error branch
This patch adds releasing resource operation in error branch
of the function named hns_roce_table_get.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Wei Hu(Xavier)
3958cc564e RDMA/hns: Configure the MTPT in hip08
The MTPT records the attribute of the registered MR. The MTPT format
will be updated in hip08, and the MTPT should be configured.

This patch is to configure the MTPT for the registered MR in hip08.

Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Wei Hu(Xavier)
2d40788825 RDMA/hns: Add support for processing send wr and receive wr
This patch is implementing for posting send request and
receiving request for hip08 RoCE driver. such as
post send verbs and post recv verbs.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Wei Hu(Xavier)
926a01dc00 RDMA/hns: Add QP operations support for hip08 SoC
This patch implements QP operations for hip08 RoCE driver and
fixes some checkpatch warning about print message in QP function.
The QP operations includes create QP, query QP, modify QP and
destroy QP.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Wei Hu(Xavier)
93aa21871b RDMA/hns: Add CQ operations support for hip08 RoCE driver
This patch adds CQ relevant operations for hip08 RoCE driver,
such as create CQ, destroy CQ, poll CQ and Request Completion
Notification(req_notify_cq).

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Wei Hu(Xavier)
7afddafa84 RDMA/hns: Configure mac&gid and user access region for hip08 RoCE driver
In hip08, the user access region(UAR) pfn is calculated
from pci device memory resource.

This patch mainly sets mac and gid table by configuring
the relevant registers and updates the uar pfn for hip08 SoC.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Wei Hu(Xavier)
ff795f7178 RDMA/hns: Support multi hop addressing for PBL in hip08
The block base address in the MR can be retrieved by the block number
which is calculated with the VA in the SGE and MTPT. In hip08, the PBL
supports multi hop addressing to retrieve the block base address by
the block number.

This patch is to add the interfaces in the MR to support multi hop
addressing for the PBL.

Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Shaobo Xu
9766edc34e RDMA/hns: Split CQE from MTT in hip08
In hip08, the SQWQE/SGE/RQWQE and CQE have different hop num and
page size, so we need to manage the base address table of the
SQWQE/SGE/RQWQE and CQE separately.

This patch is to split CQE from MTT(SQWQE/SGE/RQWQE).

Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Shaobo Xu
6a93c77afe RDMA/hns: Update the interfaces for MTT/CQE multi hop addressing in hip08
The MTT(SQWQE/SGE/RQWQE) and CQE in hip08 can support multi hop
addressing. The address of MTT/CQE can be retrieved by the BT
(Base Address Table) with multi hop addressing.

This patch is to update the interfaces in HEM to support multi hop
addressing for the MTT/CQE.

Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00
Wei Hu(Xavier)
a81fba2813 RDMA/hns: Configure BT BA and BT attribute for the contexts in hip08
BT is used to retrieve the addresses of the contexts(QPC/MPT/CQC/SRQC)
in memory. In order to support multi hop addressing for the contexts,
the BT BA should be configured by mailbox, and the BT attribution will
be set by command.

This patch is to configure the BT BA and BT attribution for the
contexts.

Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27 08:34:56 -04:00