Sathyanarayanan reported that the PCI-E AER error injection mechanism
can result in a NULL pointer dereference in apic_ack_edge():
BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
RIP: 0010:apic_ack_edge+0x1e/0x40
Call Trace:
handle_edge_irq+0x7d/0x1e0
generic_handle_irq+0x27/0x30
aer_inject_write+0x53a/0x720
It crashes in irq_complete_move() which dereferences get_irq_regs() which
is obviously NULL when this is called from non interrupt context.
Of course the pointer could be checked, but that just papers over the real
issue. Invoking the low level interrupt handling mechanism from random code
can wreckage the fragile interrupt affinity mechanism of x86 as interrupts
can only be moved in interrupt context or with special care when a CPU goes
offline and the move has to be enforced.
In the best case this triggers the warning in the MSI affinity setter, but
if the call happens on the correct CPU it just corrupts state and might
prevent further interrupt delivery for the affected device.
Mark the APIC interrupts as unsuitable for being invoked in random contexts.
This prevents the AER injection from proliferating the wreckage, but that's
less broken than the current state of affairs and more correct than just
papering over the problem by sprinkling random checks all over the place
and silently corrupting state.
Reported-by: sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200306130623.684591280@linutronix.de
In general calling generic_handle_irq() with interrupts disabled from non
interrupt context is harmless. For some interrupt controllers like the x86
trainwrecks this is outright dangerous as it might corrupt state if an
interrupt affinity change is pending.
Add infrastructure which allows to mark interrupts as unsafe and catch such
usage in generic_handle_irq().
Reported-by: sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lkml.kernel.org/r/20200306130623.590923677@linutronix.de
Clang warns when CONFIG_BALLOON_COMPACTION is unset:
../drivers/virtio/virtio_balloon.c:963:1: warning: unused label
'out_del_vqs' [-Wunused-label]
out_del_vqs:
^~~~~~~~~~~~
1 warning generated.
Move the label within the preprocessor block since it is only used when
CONFIG_BALLOON_COMPACTION is set.
Fixes: 1ad6f58ea9 ("virtio_balloon: Fix memory leaks on errors in virtballoon_probe()")
Link: https://github.com/ClangBuiltLinux/linux/issues/886
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200216004039.23464-1-natechancellor@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Let's change the mapping between virtqueue_add errors to BLK_STS
statuses, so that -ENOSPC, which indicates virtqueue full is still
mapped to BLK_STS_DEV_RESOURCE, but -ENOMEM which indicates non-device
specific resource outage is mapped to BLK_STS_RESOURCE.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20200213123728.61216-3-pasic@linux.ibm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Since nobody else is going to restart our hw_queue for us, the
blk_mq_start_stopped_hw_queues() is in virtblk_done() is not sufficient
necessarily sufficient to ensure that the queue will get started again.
In case of global resource outage (-ENOMEM because mapping failure,
because of swiotlb full) our virtqueue may be empty and we can get
stuck with a stopped hw_queue.
Let us not stop the queue on arbitrary errors, but only on -EONSPC which
indicates a full virtqueue, where the hw_queue is guaranteed to get
started by virtblk_done() before when it makes sense to carry on
submitting requests. Let us also remove a stale comment.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: f7728002c1 ("virtio_ring: fix return code on DMA mapping fails")
Link: https://lore.kernel.org/r/20200213123728.61216-2-pasic@linux.ibm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The functions vring_new_virtqueue() and __vring_new_virtqueue() are used
with split rings, and any allocations within these functions are managed
outside of the .we_own_ring flag. The commit cbeedb72b9 ("virtio_ring:
allocate desc state for split ring separately") allocates the desc state
within the __vring_new_virtqueue() but frees it only when the .we_own_ring
flag is set. This leads to a memory leak when freeing such allocated
virtqueues with the vring_del_virtqueue() function.
Fix this by moving the desc_state free code outside the flag and only
for split rings. Issue was discovered during testing with remoteproc
and virtio_rpmsg.
Fixes: cbeedb72b9 ("virtio_ring: allocate desc state for split ring separately")
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20200224212643.30672-1-s-anna@ti.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This should make it safe to have the code upstream without affecting
stable systems since there are a few details not sort out with ECRED
mode e.g: how to initiate multiple connections at once.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This adds the initial code for Enhanced Credit Based Mode which
introduces a new socket mode called L2CAP_MODE_EXT_FLOWCTL, which for
the most part work the same as L2CAP_MODE_LE_FLOWCTL but uses different
PDUs to setup the connections and also works over BR/EDR.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This introduces the definitions for the new L2CAP mode called Enhanced
Credit Based Mode.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
GUID partition entry defined to have a partition name as 36 UTF-16LE
code units. This means that on big-endian platforms ASCII symbols
would be read with 0xXX00 efi_char16_t character code. In order to
correctly extract ASCII characters from a partition name field we
should be converted from 16LE to CPU architecture.
The problem exists on all big endian platforms.
[ mingo: Minor edits. ]
Fixes: eec7ecfede ("genhd, efi: add efi partition metadata to hd_structs")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nikolai Merinov <n.merinov@inango-systems.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200308080859.21568-29-ardb@kernel.org
Link: https://lore.kernel.org/r/797777312.1324734.1582544319435.JavaMail.zimbra@inango-systems.com/
The header flag XLF_CAN_BE_LOADED_ABOVE_4G will inform us whether
allocations above 4 GiB for kernel, command line, etc are permitted,
so we take it into account when calling efi_allocate_pages() etc.
However, CONFIG_EFI_STUB implies CONFIG_RELOCATABLE, and so the flag
is guaranteed to be set on x86_64 builds, whereas i386 builds are
guaranteed to run under firmware that will not allocate above 4 GB
in the first place.
So drop the check, and just pass ULONG_MAX as the upper bound for
all allocations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303225054.28741-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-27-ardb@kernel.org
drivers/firmware/efi/libstub/Makefile builds a static library, which
is not linked into the main vmlinux target in the ordinary way [arm64],
or at all [ARM, x86].
Since commit:
7f2084fa55 ("[kbuild] handle exports in lib-y objects reliably")
any Makefile using lib-y generates lib-ksyms.o which is linked into vmlinux.
In this case, the following garbage object is linked into vmlinux.
drivers/firmware/efi/libstub/lib-ksyms.o
We do not want to follow the default linking rules for static libraries
built under libstub/ so using subdir-y instead of obj-y is the correct
way to descend into this directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
[ardb: update commit log to clarify that arm64 deviates in this respect]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200305055047.6097-1-masahiroy@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-23-ardb@kernel.org
Commit:
59f2a619a2 ("efi: Add 'runtime' pointer to struct efi")
modified the assembler routine called by efi_set_virtual_address_map(),
to grab the 'runtime' EFI service pointer while running with paging
disabled (which is tricky to do in C code)
After the change, register %ebx is not restored correctly, resulting
in all kinds of weird behavior, so fix that.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200304133515.15035-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-22-ardb@kernel.org
Commit:
3a6b6c6fb2 ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures")
moved the call to efi_memattr_init() from ARM specific to the generic
EFI init code, in order to be able to apply the restricted permissions
described in that table on x86 as well.
We never enabled this feature fully on i386, and so mapping and
reserving this table is pointless. However, due to the early call to
memblock_reserve(), the memory bookkeeping gets confused to the point
where it produces the splat below when we try to map the memory later
on:
------------[ cut here ]------------
ioremap on RAM at 0x3f251000 - 0x3fa1afff
WARNING: CPU: 0 PID: 0 at arch/x86/mm/ioremap.c:166 __ioremap_caller ...
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.20.0 #48
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
EIP: __ioremap_caller.constprop.0+0x249/0x260
Code: 90 0f b7 05 4e 38 40 de 09 45 e0 e9 09 ff ff ff 90 8d 45 ec c6 05 ...
EAX: 00000029 EBX: 00000000 ECX: de59c228 EDX: 00000001
ESI: 3f250fff EDI: 00000000 EBP: de3edf20 ESP: de3edee0
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00200296
CR0: 80050033 CR2: ffd17000 CR3: 1e58c000 CR4: 00040690
Call Trace:
ioremap_cache+0xd/0x10
? old_map_region+0x72/0x9d
old_map_region+0x72/0x9d
efi_map_region+0x8/0xa
efi_enter_virtual_mode+0x260/0x43b
start_kernel+0x329/0x3aa
i386_start_kernel+0xa7/0xab
startup_32_smp+0x164/0x168
---[ end trace e15ccf6b9f356833 ]---
Let's work around this by disregarding the memory attributes table
altogether on i386, which does not result in a loss of functionality
or protection, given that we never consumed the contents.
Fixes: 3a6b6c6fb2 ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE ... ")
Tested-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200304165917.5893-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-21-ardb@kernel.org
Add alignment slack to the PE image size, so that we can realign the
decompression buffer within the space allocated for the image.
Only relocate the kernel if it has been loaded at an unsuitable address:
- Below LOAD_PHYSICAL_ADDR, or
- Above 64T for 64-bit and 512MiB for 32-bit
For 32-bit, the upper limit is conservative, but the exact limit can be
difficult to calculate.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-20-ardb@kernel.org
The following commit:
223e3ee56f ("efi/x86: add headroom to decompressor BSS to account for setup block")
added headroom to the PE image to account for the setup block, which
wasn't used for the decompression buffer.
Now that the decompression buffer is located at the start of the image,
and includes the setup block, this is no longer required.
Add a check to make sure that the head section of the compressed kernel
won't overwrite itself while relocating. This is only for
future-proofing as with current limits on the setup and the actual size
of the head section, this can never happen.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-5-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-19-ardb@kernel.org
Store the kernel's link address as ImageBase in the PE header. Note that
the PE specification requires the ImageBase to be 64k aligned. The
preferred address should almost always satisfy that, except for 32-bit
kernel if the configuration has been customized.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-4-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-18-ardb@kernel.org
In preparation for being able to decompress into a buffer starting at a
different address than startup_32, save the calculated output address
instead of recalculating it later.
We now keep track of three addresses:
%edx: startup_32 as we were loaded by bootloader
%ebx: new location of compressed kernel
%ebp: start of decompression buffer
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-2-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-16-ardb@kernel.org
Even though it is uncommon, there are cases where the Exit() EFI boot
service might return, e.g., when we were booted via the EFI handover
protocol from OVMF and the kernel image was specified on the command
line, in which case Exit() attempts to terminate the boot manager,
which is not an EFI application itself.
So let's drop into an infinite loop instead of randomly executing code
that isn't expecting it.
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
[ardb: put 'hlt' in deadloop]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303080648.21427-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-15-ardb@kernel.org
The load address is compared with LOAD_PHYSICAL_ADDR using a signed
comparison currently (using jge instruction).
When loading a 64-bit kernel using the new efi32_pe_entry() point added by:
97aa276579 ("efi/x86: Add true mixed mode entry point into .compat section")
using Qemu with -m 3072, the firmware actually loads us above 2Gb,
resulting in a very early crash.
Use the JAE instruction to perform a unsigned comparison instead, as physical
addresses should be considered unsigned.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-14-ardb@kernel.org
code32_start is meant for 16-bit real-mode bootloaders to inform the
kernel where the 32-bit protected mode code starts. Nothing in the
protected mode kernel except the EFI stub uses it.
efi_main() currently returns boot_params, with code32_start set inside it
to tell efi_stub_entry() where startup_32 is located. Since it was invoked
by efi_stub_entry() in the first place, boot_params is already known.
Return the address of startup_32 instead.
This will allow a 64-bit kernel to live above 4Gb, for example, and it's
cleaner as well.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-5-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-13-ardb@kernel.org
Let the description of the efi/libstub/mem.c functions appear in the kernel
API documentation in the following chapters:
The Linux driver implementer’s API guide
Linux Firmware API
UEFI Support
UEFI stub library functions
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200221035832.144960-1-xypron.glpk@gmx.de
Link: https://lore.kernel.org/r/20200308080859.21568-9-ardb@kernel.org
There is a race and a buffer overflow corrupting a kernel memory while
reading an EFI variable with a size more than 1024 bytes via the older
sysfs method. This happens because accessing struct efi_variable in
efivar_{attr,size,data}_read() and friends is not protected from
a concurrent access leading to a kernel memory corruption and, at best,
to a crash. The race scenario is the following:
CPU0: CPU1:
efivar_attr_read()
var->DataSize = 1024;
efivar_entry_get(... &var->DataSize)
down_interruptible(&efivars_lock)
efivar_attr_read() // same EFI var
var->DataSize = 1024;
efivar_entry_get(... &var->DataSize)
down_interruptible(&efivars_lock)
virt_efi_get_variable()
// returns EFI_BUFFER_TOO_SMALL but
// var->DataSize is set to a real
// var size more than 1024 bytes
up(&efivars_lock)
virt_efi_get_variable()
// called with var->DataSize set
// to a real var size, returns
// successfully and overwrites
// a 1024-bytes kernel buffer
up(&efivars_lock)
This can be reproduced by concurrent reading of an EFI variable which size
is more than 1024 bytes:
ts# for cpu in $(seq 0 $(nproc --ignore=1)); do ( taskset -c $cpu \
cat /sys/firmware/efi/vars/KEKDefault*/size & ) ; done
Fix this by using a local variable for a var's data buffer size so it
does not get overwritten.
Fixes: e14ab23dde ("efivars: efivar_entry API")
Reported-by: Bob Sanders <bob.sanders@hpe.com> and the LTP testsuite
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200305084041.24053-2-vdronov@redhat.com
Link: https://lore.kernel.org/r/20200308080859.21568-24-ardb@kernel.org
Increment the mgmt revision due to the recently added setting and
command.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
More EFI updates for v5.7
- Incorporate a stable branch with the EFI pieces of Hans's work on
loading device firmware from EFI boot service memory regions
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This change introduces a wide band speech setting which allows higher
level clients to query the local controller support for wide band speech
as well as set the setting state when the radio is powered off.
Internally, this setting controls if erroneous data reporting is enabled
on the controller.
Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This uses skb_pull when parsing signalling PDUs so skb->data for
pointing to the current PDU and skb->len as the remaining bytes to be
processed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Some HP Pavilion x2 10 models use an AXP288 for charging and fuel-gauge.
We use a native power_supply / PMIC driver in this case, because on most
models with an AXP288 the ACPI AC / Battery code is either completely
missing or relies on custom / proprietary ACPI OpRegions which Linux
does not implement.
The native drivers mostly work fine, but there are 2 problems:
1. These model uses a Type-C connector for charging which the AXP288 does
not support. As long as a Type-A charger (which uses the USB data pins for
charger type detection) is used everything is fine. But if a Type-C
charger is used (such as the charger shipped with the device) then the
charger is not recognized.
So we end up slowly discharging the device even though a charger is
connected, because we are limiting the current from the charger to 500mA.
To make things worse this happens with the device's official charger.
Looking at the ACPI tables HP has "solved" the problem of the AXP288 not
being able to recognize Type-C chargers by simply always programming the
input-current-limit at 3000mA and relying on a Vhold setting of 4.7V
(normally 4.4V) to limit the current intake if the charger cannot handle
this.
2. If no charger is connected when the machine boots then it boots with the
vbus-path disabled. On other devices this is done when a 5V boost converter
is active to avoid the PMIC trying to charge from the 5V boost output.
This is done when an OTG host cable is inserted and the ID pin on the
micro-B receptacle is pulled low, the ID pin has an ACPI event handler
associated with it which re-enables the vbus-path when the ID pin is pulled
high when the OTG cable is removed. The Type-C connector has no ID pin,
there is no ID pin handler and there appears to be no 5V boost converter,
so we end up not charging because the vbus-path is disabled, until we
unplug the charger which automatically clears the vbus-path disable bit and
then on the second plug-in of the adapter we start charging.
The HP Pavilion x2 10 models with an AXP288 do have mostly working ACPI
AC / Battery code which does not rely on custom / proprietary ACPI
OpRegions. So one possible solution would be to blacklist the AXP288
native power_supply drivers and add the HP Pavilion x2 10 with AXP288
DMI ids to the list of devices which should use the ACPI AC / Battery
code even though they have an AXP288 PMIC. This would require changes to
4 files: drivers/acpi/ac.c, drivers/power/supply/axp288_charger.c,
drivers/acpi/battery.c and drivers/power/supply/axp288_fuel_gauge.c.
Beside needing adding the same DMI matches to 4 different files, this
approach also triggers problem 2. from above, but then when suspended,
during suspend the machine will not wakeup because the vbus path is
disabled by the AML code when not charging, so the Vbus low-to-high
IRQ is not triggered, the CPU never wakes up and the device does not
charge even though the user likely things it is charging, esp. since
the charge status LED is directly coupled to an adapter being plugged
in and does not reflect actual charging.
This could be worked by enabling vbus-path explicitly from say the
axp288_charger driver's suspend handler.
So neither situation is ideal, in both cased we need to explicitly enable
the vbus-path to work around different variants of problem 2 above, this
requires a quirk in the axp288_charger code.
If we go the route of using the ACPI AC / Battery drivers then we need
modifications to 3 other drivers; and we need to partially disable the
axp288_charger code, while at the same time keeping it around to enable
vbus-path on suspend.
OTOH we can copy the hardcoding of 3A input-current-limit (we never touch
Vhold, so that would stay at 4.7V) to the axp288_charger code, which needs
changes regardless, then we concentrate all special handling of this
interesting device model in the axp288_charger code. That is what this
commit does.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1791098
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
After FS_IOC_REMOVE_ENCRYPTION_KEY removes a key, it syncs the
filesystem and tries to get and put all inodes that were unlocked by the
key so that unused inodes get evicted via fscrypt_drop_inode().
Normally, the inodes are all clean due to the sync.
However, after the filesystem is sync'ed, userspace can modify and close
one of the files. (Userspace is *supposed* to close the files before
removing the key. But it doesn't always happen, and the kernel can't
assume it.) This causes the inode to be dirtied and have i_count == 0.
Then, fscrypt_drop_inode() failed to consider this case and indicated
that the inode can be dropped, causing the write to be lost.
On f2fs, other problems such as a filesystem freeze could occur due to
the inode being freed while still on f2fs's dirty inode list.
Fix this bug by making fscrypt_drop_inode() only drop clean inodes.
I've written an xfstest which detects this bug on ext4, f2fs, and ubifs.
Fixes: b1c0ec3599 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://lore.kernel.org/r/20200305084138.653498-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
- Fix busted syzkaller fix in 'get_new_pps' - this turned out to crash on
certain HW configurations
- Bug fixes for various missed things in error unwinds
- Add a missing rcu_read_lock annotation in hfi/qib
- Fix two ODP related regressions from the recent mmu notifier changes
- Several more syzkaller bugs in siw, RDMA netlink, verbs and iwcm
- Revert an old patch in CMA as it is now shown to not be allocating port
numbers properly
-----BEGIN PGP SIGNATURE-----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=SFSu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Nothing particularly exciting, some small ODP regressions from the mmu
notifier rework, another bunch of syzkaller fixes, and a bug fix for a
botched syzkaller fix in the first rc pull request.
- Fix busted syzkaller fix in 'get_new_pps' - this turned out to
crash on certain HW configurations
- Bug fixes for various missed things in error unwinds
- Add a missing rcu_read_lock annotation in hfi/qib
- Fix two ODP related regressions from the recent mmu notifier
changes
- Several more syzkaller bugs in siw, RDMA netlink, verbs and iwcm
- Revert an old patch in CMA as it is now shown to not be allocating
port numbers properly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/iwcm: Fix iwcm work deallocation
RDMA/siw: Fix failure handling during device creation
RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing
RDMA/odp: Ensure the mm is still alive before creating an implicit child
RDMA/core: Fix protection fault in ib_mr_pool_destroy
IB/mlx5: Fix implicit ODP race
IB/hfi1, qib: Ensure RCU is locked when accessing list
RDMA/core: Fix pkey and port assignment in get_new_pps
RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
RDMA/rw: Fix error flow during RDMA context initialization
RDMA/core: Fix use of logical OR in get_new_pps
Revert "RDMA/cma: Simplify rdma_resolve_addr() error flow"
Expose port rate as part of the port speed register fields.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Expose the TLS encryption key general object type enum correctly,
and add the IPSec encryption key general object type enum.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add HCA_CAP.egress_acl_forward_to_vport field to check whether HW
supports e-switch vport's egress acl to forward packets to other
e-switch vport or not.
By default E-Switch egress ACL forwards eswitch vports egress packets
to their corresponding NIC/VF vports.
With this cap enabled, the driver is allowed to alter this behavior
and forward packets to arbitrary NIC/VF vports with the following
limitations:
a. Multiple processing paths are supported if all of the following
conditions are met:
- HCA_CAP.egress_acl_forward_to_vport is set ==1.
- A destination of type Flow Table only appears once, as the
last destination in the list.
- Vport destination is supported if
HCA_CAP.egress_acl_forward_to_vport==1. Vport must not be
the Uplink.
b. Flow_tag not supported.
c. This table is only applicable after an FDB table is created.
d. Push VLAN action is not supported.
e. Pop VLAN action cannot be added concurrently to this table and
FDB table.
This feature will be used during port failover in bonding scenario
where two VFs representors are bonded to handle failover egress traffic
(VM's ingress/receive traffic).
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-----BEGIN PGP SIGNATURE-----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=aukx
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.6-2020-03-07' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Here are a few io_uring fixes that should go into this release. This
contains:
- Removal of (now) unused io_wq_flush() and associated flag (Pavel)
- Fix cancelation lockup with linked timeouts (Pavel)
- Fix for potential use-after-free when freeing percpu ref for fixed
file sets
- io-wq cancelation fixups (Pavel)"
* tag 'io_uring-5.6-2020-03-07' of git://git.kernel.dk/linux-block:
io_uring: fix lockup with timeouts
io_uring: free fixed_file_data after RCU grace period
io-wq: remove io_wq_flush and IO_WQ_WORK_INTERNAL
io-wq: fix IO_WQ_WORK_NO_CANCEL cancellation
-----BEGIN PGP SIGNATURE-----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=xwKl
-----END PGP SIGNATURE-----
Merge tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Here are a few fixes that should go into this release. This contains:
- Revert of a bad bcache patch from this merge window
- Removed unused function (Daniel)
- Fixup for the blktrace fix from Jan from this release (Cengiz)
- Fix of deeper level bfqq overwrite in BFQ (Carlo)"
* tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-block:
block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
blktrace: fix dereference after null check
Revert "bcache: ignore pending signals when creating gc and allocator thread"
block: Remove used kblockd_schedule_work_on()
This reverts commit 0f9cdd743f.
The interface of the panel is LVDS, not parallel.
The color depth is RGB888, not RGB565.
The panel has additional features, making it not so simple.
The only user (upstream) of this panel is appropriately using panel-lvds.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305130536.26011-1-peda@axentia.se
-----BEGIN PGP SIGNATURE-----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=ch+J
-----END PGP SIGNATURE-----
Merge tag 'media/v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a fix for the media controller links in both hantro driver and in
v4l2-mem2mem core
- some fixes for the pulse8-cec driver
- vicodec: handle alpha channel for RGB32 formats, as it may be used
- mc-entity.c: fix handling of pad flags
* tag 'media/v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: hantro: Fix broken media controller links
media: mc-entity.c: use & to check pad flags, not ==
media: v4l2-mem2mem.c: fix broken links
media: vicodec: process all 4 components for RGB32 formats
media: pulse8-cec: close serio in disconnect, not adap_free
media: pulse8-cec: INIT_DELAYED_WORK was called too late
Add DT nodes for HDMI video support for K2G EVM. The HDMI uses SiI9022
DPI as HDMI encoder. The DSS DPI is connected to SiI9022 HDMI
encoder's video input and encoder's output goes to HDMI connector.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
