The hierarchical topology with power-domain should be described through
child nodes, rather than as currently described in the PSCI root node. Fix
this by adding a patternProperties with a corresponding reference to the
power-domain DT binding.
Additionally, update the example to conform to the new pattern, but also to
the adjusted domain-idle-state DT binding.
Fixes: a3f048b542 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: Add missing allOf, tweak power-domain node name]
Signed-off-by: Rob Herring <robh@kernel.org>
The existing binding requires the nodename to have a '@', which is a bit
limiting for the wider use case. Therefore, let's extend the pattern to
allow either '@' or '-'.
Fixes: a3f048b542 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: drop example change]
Signed-off-by: Rob Herring <robh@kernel.org>
This patch supports reporting resolution for ABS_MT_TOUCH_MAJOR event.
This information is needed in showing pressure/width radius.
Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/1582766000-23023-1-git-send-email-johnny.chuang.emc@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touchscreen on the Cube I15-TC don't match the default display,
with 0,0 touches being reported when touching at the top-right of
the screen.
Add a quirk to invert the x coordinate.
Reported-and-tested-by: Arkadiy <arkan49@yandex.ru>
Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The percpu refcount protects this structure, and we can have an atomic
switch in progress when exiting. This makes it unsafe to just free the
struct normally, and can trigger the following KASAN warning:
BUG: KASAN: use-after-free in percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
Read of size 1 at addr ffff888181a19a30 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc4+ #5747
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x3b/0x60
? percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
? percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
__kasan_report.cold+0x1a/0x3d
? percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
rcu_core+0x370/0x830
? percpu_ref_exit+0x50/0x50
? rcu_note_context_switch+0x7b0/0x7b0
? run_rebalance_domains+0x11d/0x140
__do_softirq+0x10a/0x3e9
irq_exit+0xd5/0xe0
smp_apic_timer_interrupt+0x86/0x200
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:default_idle+0x26/0x1f0
Fix this by punting the final exit and free of the struct to RCU, then
we know that it's safe to do so. Jann suggested the approach of using a
double rcu callback to achieve this. It's important that we do a nested
call_rcu() callback, as otherwise the free could be ordered before the
atomic switch, even if the latter was already queued.
Reported-by: syzbot+e017e49c39ab484ac87a@syzkaller.appspotmail.com
Suggested-by: Jann Horn <jannh@google.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
convert the binding file rockchip-drm.txt to yaml format.
This was tested and verified on ARM and ARM64 with:
make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
Changes since v2:
- add a missing ">" sign in maintainers list
- change the licens to GPL-2.0-only
- add "additionalProperties: false"
- change the commit message to conform that it was tested on both ARM and ARM64
Changes since v1:
- fixed worng sign-off
- fixed the path of the $id property to be the path of the yaml file
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121154314.3444-1-dafna.hirschfeld@collabora.com
Remove the CONFIG_ prefix from the select statement for MFD_CROS_EC.
Fixes: 2fa2b980e3 ("mfd / platform: cros_ec: Rename config to a better name")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
'16306a61d3 ("fs/locks: always delete_block after waiting.")' add the
logic to check waiter->fl_blocker without blocked_lock_lock. And it will
trigger a UAF when we try to wakeup some waiter：
Thread 1 has create a write flock a on file, and now thread 2 try to
unlock and delete flock a, thread 3 try to add flock b on the same file.
Thread2 Thread3
flock syscall(create flock b)
...flock_lock_inode_wait
flock_lock_inode(will insert
our fl_blocked_member list
to flock a's fl_blocked_requests)
sleep
flock syscall(unlock)
...flock_lock_inode_wait
locks_delete_lock_ctx
...__locks_wake_up_blocks
__locks_delete_blocks(
b->fl_blocker = NULL)
...
break by a signal
locks_delete_block
b->fl_blocker == NULL &&
list_empty(&b->fl_blocked_requests)
success, return directly
locks_free_lock b
wake_up(&b->fl_waiter)
trigger UAF
Fix it by remove this logic, and this patch may also fix CVE-2019-19769.
Cc: stable@vger.kernel.org
Fixes: 16306a61d3 ("fs/locks: always delete_block after waiting.")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Before this patch, if gfs2_ail1_flush gets an error from function
gfs2_ail1_start_one (which comes indirectly from generic_writepages)
the file system is withdrawn, but without any explanation why.
This patch adds an error message if gfs2_ail1_flush gets an error
from gfs2_ail1_start_one.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Using an arch timer with a frequency of less than 1MHz can potentially
result in incorrect functionality in systems that assume a reasonable
rate of the arch timer of 1 to 50MHz, described as typical in the
architecture specification.
Therefore, warn if the arch timer rate is below 1MHz, which is
considered atypical and worth emphasizing.
Suggested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Frequency Invariance Engine (FIE) is providing a frequency
scaling correction factor that helps achieve more accurate
load-tracking.
So far, for arm and arm64 platforms, this scale factor has been
obtained based on the ratio between the current frequency and the
maximum supported frequency recorded by the cpufreq policy. The
setting of this scale factor is triggered from cpufreq drivers by
calling arch_set_freq_scale. The current frequency used in computation
is the frequency requested by a governor, but it may not be the
frequency that was implemented by the platform.
This correction factor can also be obtained using a core counter and a
constant counter to get information on the performance (frequency based
only) obtained in a period of time. This will more accurately reflect
the actual current frequency of the CPU, compared with the alternative
implementation that reflects the request of a performance level from
the OS.
Therefore, implement arch_scale_freq_tick to use activity monitors, if
present, for the computation of the frequency scale factor.
The use of AMU counters depends on:
- CONFIG_ARM64_AMU_EXTN - depents on the AMU extension being present
- CONFIG_CPU_FREQ - the current frequency obtained using counter
information is divided by the maximum frequency obtained from the
cpufreq policy.
While it is possible to have a combination of CPUs in the system with
and without support for activity monitors, the use of counters for
frequency invariance is only enabled for a CPU if all related CPUs
(CPUs in the same frequency domain) support and have enabled the core
and constant activity monitor counters. In this way, there is a clear
separation between the policies for which arch_set_freq_scale (cpufreq
based FIE) is used, and the policies for which arch_scale_freq_tick
(counter based FIE) is used to set the frequency scale factor. For
this purpose, a late_initcall_sync is registered to trigger validation
work for policies that will enable or disable the use of AMU counters
for frequency invariance. If CONFIG_CPU_FREQ is not defined, the use
of counters is enabled on all CPUs only if all possible CPUs correctly
support the necessary counters.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add weak function to return the hardware maximum frequency of a CPU,
with the default implementation returning cpuinfo.max_freq, which is
the best information we can generically get from the cpufreq framework.
The default can be overwritten by a strong function in platforms
that want to provide an alternative implementation, with more accurate
information, obtained either from hardware or firmware.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The activity monitors extension is an optional extension introduced
by the ARMv8.4 CPU architecture.
Add initial documentation for the AMUv1 extension:
- arm64/amu.txt: AMUv1 documentation
- arm64/booting.txt: system registers initialisation
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Access to the AMU counters should be disabled by default in kvm guests,
as information from the counters might reveal activity in other guests
or activity on the host.
Therefore, disable access to AMU registers from EL0 and EL1 in kvm
guests by:
- Hiding the presence of the extension in the feature register
(SYS_ID_AA64PFR0_EL1) on the VCPU.
- Disabling access to the AMU registers before switching to the guest.
- Trapping accesses and injecting an undefined instruction into the
guest.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The activity monitors extension is an optional extension introduced
by the ARMv8.4 CPU architecture. In order to access the activity
monitors counters safely, if desired, the kernel should detect the
presence of the extension through the feature register, and mediate
the access.
Therefore, disable direct accesses to activity monitors counters
from EL0 (userspace) and trap them to EL1 (kernel).
To be noted that the ARM64_AMU_EXTN kernel config does not have an
effect on this code. Given that the amuserenr_el0 resets to an
UNKNOWN value, setting the trap of EL0 accesses to EL1 is always
attempted for safety and security considerations. Therefore firmware
should still ensure accesses to AMU registers are not trapped in
EL2/EL3 as this code cannot be bypassed if the CPU implements the
Activity Monitors Unit.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The activity monitors extension is an optional extension introduced
by the ARMv8.4 CPU architecture. This implements basic support for
version 1 of the activity monitors architecture, AMUv1.
This support includes:
- Extension detection on each CPU (boot, secondary, hotplugged)
- Register interface for AMU aarch64 registers
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
slimbus addresses are 16 bit wide, masking page numbers
to wcd register at offset of 12 will limit the number for pages.
So it becomes impossible to write to page 0x10 registers.
Remove masking 0x800 (slimbus address range) from register address
and making use of window parameters in regmap config should fix it
and also will represent the registers exactly inline with Datasheet.
Remove this unnessary masking and make the registers be inline
with datasheet.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200306152633.25836-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
commit a2ca53b52e ("spi: Add HiSilicon v3xx SPI NOR flash
controller driver") likely inadvertently used a select statement
with a CONFIG_ prefix, remove the prefix.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/f8ac6b32a29b9a05b58a7e58ffe8b780642abbf1.camel@perches.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only user left is the shadow attach for legacy drivers.
v2: Shift the #ifdef CONFIG_DRM_LEGACY to now also include
drm_get_pci_dev() (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225165835.2394442-1-daniel.vetter@ffwll.ch
Hi Mark
These are v2 resend of soc-pcm cleanup step5.
1) - 4) are rebased to latest for-5.7 branch.
5) - 6) are remaked of previous [6/8], [7/8] which were mistaken patch.
Kuninori Morimoto (6):
1) ASoC: soc-pcm: move dpcm_fe_dai_close()
2) ASoC: soc-pcm: add dpcm_fe_dai_cleanup()
3) ASoC: soc-pcm: use snd_soc_dai_get_pcm_stream() at dpcm_set_fe_runtime()
4) ASoC: soc-pcm: tidyup dulicate handing at dpcm_fe_dai_startup()
5) ASoC: soc-pcm: check DAI's activity more simply
6) ASoC: soc-pcm: Do Digital Mute for both CPU/Codec in same timing.
sound/soc/soc-pcm.c | 97 ++++++++++++++++++++++-----------------------
1 file changed, 47 insertions(+), 50 deletions(-)
--
2.17.1
We are currently using simple-audio-card on the Allwinner A64 SoC.
The digital audio codec there (sun8i-codec) has 3 AIFs, one each for the
CPU, the modem, and Bluetooth. Adding support for the secondary AIFs
requires adding codec2codec DAI links.
Since the modem and bt-sco codec DAI drivers only have one set of
possible PCM parameters (namely, 8kHz mono S16LE), there's no real
need for a machine driver to specify the DAI link configuration. The
parameters for these "simple" DAI links can be chosen automatically.
This series adds codec2codec DAI link support to simple-audio-card.
Codec to codec links are automatically detected when all DAIs in the
link belong to codec components.
I tried to reuse as much code as possible, so the first two patches
refactor a couple of helper functions to be more generic.
The last patch adds the new feature and its documentation.
Changes in v4:
- Rebased on top of asoc/for-next, several changes to patch 2
- Removed unused variable from patch 3
Changes in v3:
- Update use of for_each_rtd_components for v5.6
Changes in v2:
- Drop patch 1 as it was merged
- Automatically detect codec2codec links instead of using a DT property
Samuel Holland (3):
ALSA: pcm: Add a standalone version of snd_pcm_limit_hw_rates
ASoC: pcm: Export parameter intersection logic
ASoC: simple-card: Add support for codec2codec DAI links
Documentation/sound/soc/codec-to-codec.rst | 9 +++-
include/sound/pcm.h | 9 +++-
include/sound/soc.h | 3 ++
sound/core/pcm_misc.c | 18 +++----
sound/soc/generic/simple-card-utils.c | 48 ++++++++++++++++++
sound/soc/soc-pcm.c | 59 ++++++++++++++--------
6 files changed, 114 insertions(+), 32 deletions(-)
--
2.24.1
The runtime pointer has been taken in functional level so there is no need
to take it again under the if () case.
Fixes: 9d789dc047 ("ALSA: dmaengine_pcm: Consider DMA cache caused delay in pointer callback")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200227093544.27723-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
KBUILD_MODNAME is available to name kernel modules according to its object
name. This commit uses the macro instead of string for name field of
struct driver since drivers in ALSA firewire stack have the same name of
each object name.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200306135229.11659-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Digital Mute for CPU is done at soc_pcm_close(), and
Digital Mute for Codec is done at soc_pcm_hw_free().
It is just confusable.
This patch do Digital Mute for both CPU/Codec in same timing.
Then, it cares DAI activity
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imjip9ty.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_free() want to call snd_soc_dai_digital_mute()
if it was last user of Playback or Capture.
bool playback = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
int playback_active = dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK];
int capture_active = dai->stream_active[SNDRV_PCM_STREAM_CAPTURE];
if ((playback && playback_active == 1) ||
(!playback && capture_active == 1))
snd_soc_dai_digital_mute(...)
But it is same as
int active = dai->stream_active[substream->stream];
if (active == 1)
snd_soc_dai_digital_mute(...)
This patch simplify the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k13yp9ub.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
error handling at dpcm_fe_dai_startup() has duplicate code.
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfoep9ug.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have snd_soc_dai_get_pcm_stream(),
let's use it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu8up9ul.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_fe_dai_close() and error case of dpcm_fe_dai_open()
need to do same cleanup operation.
To avoid duplicate code, this patch adds dpcm_fe_dai_cleanup()
and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8tap9uq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
move dpcm_fe_dai_close() next to dpcm_fe_dai_open().
This is prepare for dpcm_fe_dai_open() cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pndqp9uv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on RNG we might try to fill an 8G region for every possible
order, using the smallest possible chunk size of 4K, which seems to be
very slow. Try to remedy the situation by adding an overall timeout for
the test, while also selecting each order level in a random fashion.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1310
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305204711.217783-2-matthew.auld@intel.com
Following the example in cb2cf0de11 ("ASoC: soc-core: care Codec <->
Codec case by non_legacy_dai_naming"), determine if a DAI link contains
only codec DAIs by examining the non_legacy_dai_naming flag in each
DAI's component.
For now, we assume there is only one or a small set of valid PCM stream
parameters, so num_params == 1 is good enough. We also assume that the
same params are valid for all supported streams. params is set to the
subset of parameters common among all DAIs, and then the existing code
automatically chooses the highest quality of the remaining values when
the link is brought up.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200305051143.60691-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
