Variable dw is being initialized with a value that is never read,
it is assigned a new value later on. The assignment is redundant
and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200222134755.134209-1-colin.king@canonical.com
Since commit a3a0e43fd7 ("io_uring: don't enter poll loop if we have
CQEs pending"), if we already events pending, we won't enter poll loop.
In case SETUP_IOPOLL and SETUP_SQPOLL are both enabled, if app has
been terminated and don't reap pending events which are already in cq
ring, and there are some reqs in poll_list, io_sq_thread will enter
__io_iopoll_check(), and find pending events, then return, this loop
will never have a chance to exit.
I have seen this issue in fio stress tests, to fix this issue, let
io_sq_thread call io_iopoll_getevents() with argument 'min' being zero,
and remove __io_iopoll_check().
Fixes: a3a0e43fd7 ("io_uring: don't enter poll loop if we have CQEs pending")
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The panel datasheet says that the panel samples at falling edge, but
does not say anything about h/v sync signals. Testing shows that if the
sync signals are driven on falling edge, the picture on the panel will
be slightly shifted right.
Setting sync drive edge to the same as data drive edge fixes this issue.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114093950.4101-4-tomi.valkeinen@ti.com
When the forceadd option is enabled, the hash:* types should find and replace
the first entry in the bucket with the new one if there are no reuseable
(deleted or timed out) entries. However, the position index was just not set
to zero and remained the invalid -1 if there were no reuseable entries.
Reported-by: syzbot+6a86565c74ebe30aea18@syzkaller.appspotmail.com
Fixes: 23c42a403a ("netfilter: ipset: Introduction of new commands and protocol version 7")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
KVM uses some of the static-inline helpers like icache_is_vipt() from
its HYP code. This assumes the function is inlined so that the code is
mapped to EL2. The compiler may decide not to inline these, and the
out-of-line version may not be in the __hyp_text section.
Add the additional __always_ hint to these static-inlines that are used
by KVM.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200220165839.256881-4-james.morse@arm.com
KVM uses swab32() when mediating GIC MMIO accesses if the GICV is badly
aligned, and the host and guest differ in endianness.
arm64 doesn't provide a __arch_swab32(), so __fswab32() is always backed
by the macro implementation that the compiler reduces to a single
instruction. But the static-inline causes problems for KVM if the compiler
chooses not to inline this function, it may not be located in the
__hyp_text where __vgic_v2_perform_cpuif_access() needs it.
Create our own __kvm_swab32() macro that calls ___constant_swab32()
directly. This way we know it will always be inlined.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200220165839.256881-3-james.morse@arm.com
On non VHE CPUs, KVM's __hyp_text contains code run at EL2 while the rest
of the kernel runs at EL1. This code lives in its own section with start
and end markers so we can map it to EL2.
The compiler may decide not to inline static-inline functions from the
header file. It may also decide not to put these out-of-line functions
in the same section, meaning they aren't mapped when called at EL2.
Clang-9 does exactly this with __kern_hyp_va() and a few others when
x18 is reserved for the shadow call stack. Add the additional __always_
hint to all the static-inlines that are called from a hyp file.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200220165839.256881-2-james.morse@arm.com
----
kvm_get_hyp_vector() pulls in all the regular per-cpu accessors
and this_cpu_has_cap(), fortunately its only called for VHE.
In the case of huge hash:* types of sets, due to the single spinlock of
a set the processing of the whole set under spinlock protection could take
too long.
There were four places where the whole hash table of the set was processed
from bucket to bucket under holding the spinlock:
- During resizing a set, the original set was locked to exclude kernel side
add/del element operations (userspace add/del is excluded by the
nfnetlink mutex). The original set is actually just read during the
resize, so the spinlocking is replaced with rcu locking of regions.
However, thus there can be parallel kernel side add/del of entries.
In order not to loose those operations a backlog is added and replayed
after the successful resize.
- Garbage collection of timed out entries was also protected by the spinlock.
In order not to lock too long, region locking is introduced and a single
region is processed in one gc go. Also, the simple timer based gc running
is replaced with a workqueue based solution. The internal book-keeping
(number of elements, size of extensions) is moved to region level due to
the region locking.
- Adding elements: when the max number of the elements is reached, the gc
was called to evict the timed out entries. The new approach is that the gc
is called just for the matching region, assuming that if the region
(proportionally) seems to be full, then the whole set does. We could scan
the other regions to check every entry under rcu locking, but for huge
sets it'd mean a slowdown at adding elements.
- Listing the set header data: when the set was defined with timeout
support, the garbage collector was called to clean up timed out entries
to get the correct element numbers and set size values. Now the set is
scanned to check non-timed out entries, without actually calling the gc
for the whole set.
Thanks to Florian Westphal for helping me to solve the SOFTIRQ-safe ->
SOFTIRQ-unsafe lock order issues during working on the patch.
Reported-by: syzbot+4b0e9d4ff3cf117837e5@syzkaller.appspotmail.com
Reported-by: syzbot+c27b8d5010f45c666ed1@syzkaller.appspotmail.com
Reported-by: syzbot+68a806795ac89df3aa1c@syzkaller.appspotmail.com
Fixes: 23c42a403a ("netfilter: ipset: Introduction of new commands and protocol version 7")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Upon unregistering the user interface, we mark the GPU as wedged to
ensure we push no new work to the GPU, and to flush all current work
from the GPU. Move this call to the GT backend.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221235135.2883006-1-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----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=4Vci
-----END PGP SIGNATURE-----
Merge tag 'sched-for-bpf-2020-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into bpf-next
Two migrate disable related stubs for BPF to base the RT patches on
kctx_len = (ntohl(KEY_CONTEXT_CTX_LEN_V(aeadctx->key_ctx_hdr)) << 4)
- sizeof(chcr_req->key_ctx);
can't possibly be endian-safe. Look: ->key_ctx_hdr is __be32. And
KEY_CONTEXT_CTX_LEN_V is "shift up by 24 bits". On little-endian hosts it
sees
b0 b1 b2 b3
in memory, inteprets that into b0 + (b1 << 8) + (b2 << 16) + (b3 << 24),
shifts up by 24, resulting in b0 << 24, does ntohl (byteswap on l-e),
gets b0 and shifts that up by 4. So we get b0 * 16 - sizeof(...).
Sounds reasonable, but on b-e we get
b3 + (b2 << 8) + (b1 << 16) + (b0 << 24), shift up by 24,
yielding b3 << 24, do ntohl (no-op on b-e) and then shift up by 4.
Resulting in b3 << 28 - sizeof(...), i.e. slightly under b3 * 256M.
Then we increase it some more and pass to alloc_skb() as size.
Somehow I doubt that we really want a quarter-gigabyte skb allocation
here...
Note that when you are building those values in
#define FILL_KEY_CTX_HDR(ck_size, mk_size, d_ck, opad, ctx_len) \
htonl(KEY_CONTEXT_VALID_V(1) | \
KEY_CONTEXT_CK_SIZE_V((ck_size)) | \
KEY_CONTEXT_MK_SIZE_V(mk_size) | \
KEY_CONTEXT_DUAL_CK_V((d_ck)) | \
KEY_CONTEXT_OPAD_PRESENT_V((opad)) | \
KEY_CONTEXT_SALT_PRESENT_V(1) | \
KEY_CONTEXT_CTX_LEN_V((ctx_len)))
ctx_len ends up in the first octet (i.e. b0 in the above), which
matches the current behaviour on l-e. If that's the intent, this
thing should've been
kctx_len = (KEY_CONTEXT_CTX_LEN_G(ntohl(aeadctx->key_ctx_hdr)) << 4)
- sizeof(chcr_req->key_ctx);
instead - fetch after ntohl() we get (b0 << 24) + (b1 << 16) + (b2 << 8) + b3,
shift it down by 24 (b0), resuling in b0 * 16 - sizeof(...) both on l-e and
on b-e.
PS: when sparse warns you about endianness problems, it might be worth checking
if there really is something wrong. And I don't mean "slap __force cast on it"...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Kamil Konieczny <k.konieczny@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto_engine support for HASH algorithms, to make use of
the engine queue.
The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free.
Only the backlog request are sent to crypto-engine since the others
can be handled by CAAM, if free, especially since JR has up to 1024
entries (more than the 10 entries from crypto-engine).
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto_engine support for RSA algorithms, to make use of
the engine queue.
The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free. In case the queue is empty,
the request is directly sent to CAAM.
Only the backlog request are sent to crypto-engine since the others
can be handled by CAAM, if free, especially since JR has up to 1024
entries (more than the 10 entries from crypto-engine).
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto_engine support for AEAD algorithms, to make use of
the engine queue.
The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free.
If sending just the backlog request to crypto-engine, and non-blocking
directly to CAAM, the latter requests have a better chance to be
executed since JR has up to 1024 entries, more than the 10 entries
from crypto-engine.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Integrate crypto_engine into CAAM, to make use of the engine queue.
Add support for SKCIPHER algorithms.
This is intended to be used for CAAM backlogging support.
The requests, with backlog flag (e.g. from dm-crypt) will be listed
into crypto-engine queue and processed by CAAM when free.
This changes the return codes for enqueuing a request:
-EINPROGRESS if OK, -EBUSY if request is backlogged (via
crypto-engine), -ENOSPC if the queue is full, -EIO if it
cannot map the caller's descriptor.
The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free. Only the backlog request are
sent to crypto-engine since the others can be handled by CAAM, if free,
especially since JR has up to 1024 entries (more than the 10 entries
from crypto-engine).
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on commit 6b80ea389a ("crypto: change transient busy return code to -ENOSPC"),
change the return code of caam_jr_enqueue function to -EINPROGRESS, in
case of success, -ENOSPC in case the CAAM is busy (has no space left
in job ring queue), -EIO if it cannot map the caller's descriptor.
Update, also, the cases for resource-freeing for each algorithm type.
This is done for later use, on backlogging support in CAAM.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Create a common rsa_priv_f_done function, which based
on private key form calls the specific unmap function.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Changed parameters for ahash_edesc_alloc function:
- remove flags since they can be computed in
ahash_edesc_alloc, the only place they are needed;
- use ahash_request instead of caam_hash_ctx, to be
able to compute gfp flags.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Create two common ahash_done_* functions with the dma
direction as parameter. Then, these 2 are called with
the proper direction for unmap.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Create a common crypt function for each skcipher/aead/gcm/chachapoly
algorithms and call it for encrypt/decrypt with the specific boolean -
true for encrypt and false for decrypt.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the lifetime of the hash data matches the lifetime of the driver,
hash data can be allocated using the managed allocators.
While at it, simplify cc_hash_free() by removing an unneeded check
(hash_handle is always valid here).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the lifetime of the cipher data matches the lifetime of the driver,
cipher data can be allocated using the managed allocators.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the lifetime of the AEAD data matches the lifetime of the driver,
AEAD data can be allocated using the managed allocators.
While at it, simplify cc_aead_free() by removing an unneeded cast, and
an unneeded check (aead_handle is always valid here).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the existing dev helper variable instead of plat_dev->dev.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Miscellaneous improvements:
- Start comment blocks with "/**" to enable kerneldoc,
- Mark parameters using "@" instead of "\param",
- Fix typos in parameter names,
- Add missing function names to kerneldoc headers,
- Add missing parameter and return value descriptions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Miscellaneous improvements:
- Start comment blocks with "/**" to enable kerneldoc,
- Mark parameters using "@" instead of "\param",
- Add missing function names to kerneldoc headers,
- Add missing parameter descriptions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Normal comments should start with "/*".
"/**" is reserver for kerneldoc.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extract the copy to SRAM of the initial values for a hash algorithm into
its own function, to improve readability and ease maintenance.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cc_cipher_handle structure contains only a single member, and only
one instance exists. Simplify the code and reduce memory consumption by
moving this member to struct cc_drvdata.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The buff_mgr_handle structure contains only a single member, and only
one instance exists. Simplify the code and reduce memory consumption by
moving this member to struct cc_drvdata.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cc_debugfs_ctx structure contains only a single member, and only one
instance exists. Simplify the code and reduce memory consumption by
moving this member to struct cc_drvdata.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cc_sram_ctx structure contains only a single member, and only one
instance exists. Simplify the code and reduce memory consumption by
moving this member to struct cc_drvdata.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cc_pm_suspend() and cc_pm_resume() are not used outside
drivers/crypto/ccree/cc_pm.c.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If CONFIG_PM=y, cc_pm_is_dev_suspended() is just a wrapper around
pm_runtime_suspended().
If CONFIG_PM=n, cc_pm_is_dev_suspended() a dummy that behaves exactly
the same as the dummy for pm_runtime_suspended().
Hence remove cc_pm_is_dev_suspended(), and call pm_runtime_suspended()
directly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the driver is probed, it means a match was found in
arm_ccree_dev_of_match[]. Hence we can just use the
of_device_get_match_data() helper.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, a large part of the probe function runs before Runtime PM is
enabled. As the driver manages the device's clock manually, this may
work fine on some systems, but may break on platforms with a more
complex power hierarchy.
Fix this by moving the initialization of Runtime PM before the first
register access (in cc_wait_for_reset_completion()), and putting the
device to sleep only after the last access (in cc_set_ree_fips_status()).
This allows to remove the pm_on flag, which was used to track manually
if Runtime PM had been enabled or not.
Remove the cc_pm_{init,go,fini}() wrappers, as they are called only
once, and obscure operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SRAM addresses are small integer offsets into local SRAM. Currently
they are stored using a mixture of cc_sram_addr_t (u64), u32, and
dma_addr_t types.
Settle on u32, and remove the cc_sram_addr_t typedefs.
This allows to drop several casts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SRAM allocator does not support deallocating memory.
Hence remove all references to freeing SRAM.
Fix grammar while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While the larval digest addresses are not always used in
cc_get_plain_hmac_key() and cc_hash_digest(), they are always
calculated.
Defer their calculations to the points where needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the existing lower_32_bits() and upper_32_bits() macros instead of
explicit casts and shifts to split a 64-bit address in its two 32-bit
parts.
Drop the superfluous cast to "u16", as the FIELD_PREP() macro already
masks it to the specified field width.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
