There is no real reason to require drivers to set and use
dev->dev_private. Indeed, the current recommendation, as documented in
drm_device.h, is to embed struct drm_device in the per-device struct
instead of using dev_private.
Remove the requirement for dev_private to have been set to indicate
driver initialization.
For background, quoting Daniel Vetter:
Now there might be some hilarious races this papers over, but:
- Proper drivers should only call drm_dev_register once everything is
set up, including this stuff here. No race possible with anything else
really.
- Slightly more wobbly drivers, including the legacy ones, all use
drm_global_mutex. This was the former BKL, which means that it was
impossible for soeone to go through the load/unload/reload (between
lastclose and firstopen) paths and also run the ioctl. But the ioctl
had to be made unlocked because blocking there killed X:
commit 8f4ff2b06a
Author: Ilija Hadzic <ihadzic@research.bell-labs.com>
Date: Mon Oct 31 17:46:18 2011 -0400
drm: do not sleep on vblank while holding a mutex
The even more legacy DRM_CONTROL ioctl stayed fully locked. But the
file open/close paths are still fully locked, and that's the only
place legacy drivers should call drm_irq_install/uninstall, so should
all still be fully ordered and protected and happy.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211144753.3175-1-jani.nikula@intel.com
Remove "snps,phy-bus-name", "snps,phy-bus-id" and "snps,phy-addr"
properties which are deprecated.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
We've got a regression report about M-Audio Fast Track C400 device,
and the git bisection resulted in the commit e0ccdef926 ("ALSA:
usb-audio: Clean up check_input_term()"). This commit was about the
rewrite of the input terminal parser, and it's not too obvious from
the change what really broke. The answer is: it's the interpretation
of UAC2/3 effect units.
In the original code, UAC2 effect unit is as if through UAC1
processing unit because both UAC1 PU and UAC2/3 EU share the same
number (0x07). The old code went through a complex switch-case
fallthrough, finally bailing out in the middle:
if (protocol == UAC_VERSION_2 &&
hdr[2] == UAC2_EFFECT_UNIT) {
/* UAC2/UAC1 unit IDs overlap here in an
* uncompatible way. Ignore this unit for now.
*/
return 0;
}
... and this special handling was missing in the new code; the new
code treats UAC2/3 effect unit as if it were equivalent with the
processing unit.
Actually, the old code was too confusing. The effect unit has an
incompatible unit description with the processing unit, so we
shouldn't have dealt with EU in the same way.
This patch addresses the regression by changing the effect unit
handling to the own parser function. The own parser function makes
the clear distinct with PU, so it improves the readability, too.
The EU parser just sets the type and the id like the old kernels.
Once when the proper effect unit support is added, we can revisit this
parser function, but for now, let's keep this simple setup as is.
Fixes: e0ccdef926 ("ALSA: usb-audio: Clean up check_input_term()")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206147
Link: https://lore.kernel.org/r/20200211160521.31990-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For the old mount API, the module parameters parseing function will
be called in ceph_mount() and also just after the default posix acl
flag set, so we can control to enable/disable it via the mount option.
But for the new mount API, it will call the module parameters
parseing function before ceph_get_tree(), so the posix acl will always
be enabled.
Fixes: 82995cc6c5 ("libceph, rbd, ceph: convert to use the new mount API")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
syzbot reported that 4fbc0c711b ("ceph: remove the extra slashes in
the server path") had caused a regression where an allocation could be
done under a spinlock -- compare_mount_options() is called by sget_fc()
with sb_lock held.
We don't really need the supplied server path, so canonicalize it
in place and compare it directly. To make this work, the leading
slash is kept around and the logic in ceph_real_mount() to skip it
is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e.
canonicalized) path, with the leading slash of course.
Fixes: 4fbc0c711b ("ceph: remove the extra slashes in the server path")
Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
In O_APPEND & O_DIRECT mode, the data from different writers will
be possibly overlapping each other since they take the shared lock.
For example, both Writer1 and Writer2 are in O_APPEND and O_DIRECT
mode:
Writer1 Writer2
shared_lock() shared_lock()
getattr(CAP_SIZE) getattr(CAP_SIZE)
iocb->ki_pos = EOF iocb->ki_pos = EOF
write(data1)
write(data2)
shared_unlock() shared_unlock()
The data2 will overlap the data1 from the same file offset, the
old EOF.
Switch to exclusive lock instead when O_APPEND is specified.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Some DMA engines can have big FIFOs which adds to the latency.
The DMAengine framework can report the FIFO utilization in bytes. Use this
information for the delay reporting.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200210153336.10218-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_pcm_open() calls snd_soc_dai_startup() under loop.
Thus, it needs to care about started/not-yet-started codec DAI.
But, if soc-dai.c is handling it, soc-pcm.c don't need to care
about it.
This patch adds started flag to soc-dai.h, and simplify soc-pcm.c.
This is one of prepare for cleanup soc-pcm-open()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zgfcey5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-pcm is using bit-OR'ed error
ret |= snd_soc_component_close(component, substream);
ret |= snd_soc_component_hw_free(component, substream);
The driver may return arbitrary error codes so they can conflict.
The bit-OR'ed error works only if the return code is always consistent.
This patch fixup it, and use *last* ret value.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e0vceyc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each user context is allocated a certain number of RcvArray (TID)
entries and these entries are managed through TID groups. These groups
are put into one of three lists in each user context: tid_group_list,
tid_used_list, and tid_full_list, depending on the number of used TID
entries within each group. When TID packets are expected, one or more
TID groups will be allocated. After the packets are received, the TID
groups will be freed. Since multiple user threads may access the TID
groups simultaneously, a mutex exp_mutex is used to synchronize the
access. However, when the user file is closed, it tries to release
all TID groups without acquiring the mutex first, which risks a race
condition with another thread that may be releasing its TID groups,
leading to data corruption.
This patch addresses the issue by acquiring the mutex first before
releasing the TID groups when the file is closed.
Fixes: 3abb33ac65 ("staging/hfi1: Add TID cache receive init and free funcs")
Link: https://lore.kernel.org/r/20200210131026.87408.86853.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commit e812744c5f ("drm: msm: a6xx: Add support for A618") missed
updating the VBIF flush in a6xx_gmu_shutdown and instead
inserted the new sequence into a6xx_pm_suspend along with a redundant
GMU idle.
Move a6xx_bus_clear_pending_transactions to a6xx_gmu.c and use it in
the appropriate place in the shutdown routine and remove the redundant
idle call.
v2: Remove newly unused variable that was triggering a warning
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes: e812744c5f ("drm: msm: a6xx: Add support for A618")
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch adds new for_each_dapm_widgets() macro and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878slbceyg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixup the GMU bus table values for the sc7180 target.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes: e812744c5f ("drm: msm: a6xx: Add support for A618")
Signed-off-by: Rob Clark <robdclark@chromium.org>
commit 3635bf09a8 ("ASoC: soc-pcm: add symmetry for channels and
sample bits") set 0 not only to dai->rate but also to dai->channels and
dai->sample_bits if DAI was not active at soc_pcm_close().
and
commit d3383420c9 ("ASoC: soc-pcm: move DAIs parameters cleaning into
hw_free()") moved it from soc_pcm_close() to soc_pcm_hw_free().
These happen at v3.14.
But, maybe because of branch merge conflict or something similar happen
then, soc_pcm_close() still has old settings
(care only dai->rate, doesn't care dai->channels/sample_bits).
This is 100% duplicated operation.
This patch removes soc_pcm_close() side operation which supposed to
already moved to soc_pcm_hw_free().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a75rceyl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has snd_soc_runtime_activate() / snd_soc_runtime_deactivate().
These increment or decrement DAI/Component activity, but the code
difference is only +1 or -1.
This patch adds common snd_soc_runtime_action() which can get +1 or -1 as
parameter, and use it from snd_soc_runtime_activate/deactivate() to
avoid duplicate implementation.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87blq7ceyq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit e812744c5f ("drm: msm: a6xx: Add support for A618") added a
universal GBIF un-halt into a6xx_start(). This can cause problems for
a630 targets which do not use GBIF and might have access protection
enabled on the region now occupied by the GBIF registers.
But it turns out that we didn't need to unhalt the GBIF in this path
since the stop function already takes care of that after executing a flush
but before turning off the headswitch. We should be confident that the
GBIF is open for business when we restart the hardware.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes: e812744c5f ("drm: msm: a6xx: Add support for A618")
Signed-off-by: Rob Clark <robdclark@chromium.org>
I was hitting kCFI crashes when building with clang, and after
some digging finally narrowed it down to the
dsi_mgr_connector_mode_valid() function being implemented as
returning an int, instead of an enum drm_mode_status.
This patch fixes it, and appeases the opaque word of the kCFI
gods (seriously, clang inlining everything makes the kCFI
backtraces only really rough estimates of where things went
wrong).
Thanks as always to Sami for his help narrowing this down.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: freedreno@lists.freedesktop.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Highest bank bit configuration is different for a618 gpu. Update
it with the correct configuration which is the reset value incidentally.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Fixes: e812744c5f ("drm: msm: a6xx: Add support for A618")
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We can not require that the system process a tasklet in reasonable time
(thanks be to ksoftirqd), but we can insist that having waited
sufficiently for the error interrupt to have been raised and having
kicked the tasklet, the reset has begun and the request will be marked
as in error (if not already completed).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210205722.794180-3-chris@chris-wilson.co.uk
Add UBWC global configuration for display on
SC7180 target.
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Fixes: 73bfb790ac ("msm:disp:dpu1: setup display datapath for SC7180 target")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add rate limiting of the 'pp done time out' warnings since these
warnings can quickly fill the dmesg buffer.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The commit 4b638f13ba ("xsk: Eliminate the RX batch size")
introduced a much more lazy way of updating the global consumer
pointers from the kernel side, by only doing so when running out of
entries in the fill or Tx rings (the rings consumed by the
kernel). This can result in a deadlock with the user application if
the kernel requires more than one entry to proceed and the application
cannot put these entries in the fill ring because the kernel has not
updated the global consumer pointer since the ring is not empty.
Fix this by publishing the local kernel side consumer pointer whenever
we have completed Rx or Tx processing in the kernel. This way, user
space will have an up-to-date view of the consumer pointers whenever it
gets to execute in the one core case (application and driver on the
same core), or after a certain number of packets have been processed
in the two core case (application and driver on different cores).
A side effect of this patch is that the one core case gets better
performance, but the two core case gets worse. The reason that the one
core case improves is that updating the global consumer pointer is
relatively cheap since the application by definition is not running
when the kernel is (they are on the same core) and it is beneficial
for the application, once it gets to run, to have pointers that are
as up to date as possible since it then can operate on more packets
and buffers. In the two core case, the most important performance
aspect is to minimize the number of accesses to the global pointers
since they are shared between two cores and bounces between the caches
of those cores. This patch results in more updates to global state,
which means lower performance in the two core case.
Fixes: 4b638f13ba ("xsk: Eliminate the RX batch size")
Reported-by: Ryan Goodfellow <rgoodfel@isi.edu>
Reported-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Link: https://lore.kernel.org/bpf/1581348432-6747-1-git-send-email-magnus.karlsson@intel.com
Clang warns a few times (trimmed for brevity):
../drivers/net/wireless/ath/ath11k/debugfs_sta.c:185:7: warning:
variable 'rate_idx' is used uninitialized whenever 'if' condition is
false [-Wsometimes-uninitialized]
It is not wrong, rate_idx is only initialized in the first if block.
However, this is not necessarily an issue in practice because rate_idx
will only be used when initialized because
ath11k_accumulate_per_peer_tx_stats only uses rate_idx when flags is not
set to RATE_INFO_FLAGS_HE_MCS, RATE_INFO_FLAGS_VHT_MCS, or
RATE_INFO_FLAGS_MCS. Still, it is not good to stick uninitialized values
into another function so initialize it to zero to prevent any issues
down the line.
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Link: https://github.com/ClangBuiltLinux/linux/issues/832
Reported-by: ci_notify@linaro.org
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
BTCOEX feature is not supported by all QCA4019 chipsets.
Since btcoex enabled by default in firmware, host needs to
enable COEX support depends on the hardware. Enabling it
by default in unsupported hardware will cause some
feature disabled in hardware.
This patch will read btcoex_support flag and
wlan priority gpio pin number from DT. Depends on the
btcoex_support flag value host will expose BTCOEX support
and wlan priority gpio pin number to target.
Testing:
* Tested HW : QCA4019
* Tested FW : 10.4-3.2.1.1-00017
Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This adds new dt entries qcom,coexist-support and qcom,coexist-gpio-pin
which will be used by ath10k driver to identify coex support
of a hardware and notify wifi firmware the gpio pin number.
This pin number information is needed for the hardware QCA4019.
Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Run parse-maintainers.pl and choose THUNDERBOLT record. Fix it accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fix warnings which were recently introduced:
drivers/net/wireless/ath/ath10k/ahb.c:462: Alignment should match open parenthesis
drivers/net/wireless/ath/ath10k/ahb.c:470: Alignment should match open parenthesis
drivers/net/wireless/ath/ath10k/sdio.c:697: space prohibited before that close parenthesis ')'
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This catches the majority of drivers (unfortunately not if we take
users into account, because all the big drivers have at least a
lastclose hook).
With the prep patches out of the way all drm state is fully protected
and either prevents or can deal with the races from dropping the BKL
around open/close. The only thing left to audit are the various driver
hooks - by keeping the BKL around if any of them are set we have a
very simple cop-out!
Note that one of the biggest prep pieces to get here was making
dev->open_count atomic, which was done in
commit 7e13ad8964
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jan 24 13:01:07 2020 +0000
drm: Avoid drm_global_mutex for simple inc/dec of dev->open_count
v2:
- Rebase and fix locking in drm_open() (Chris)
- Indentation fix in drm_release
- Typo fix in the commit message (Sam)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204150146.2006481-6-daniel.vetter@ffwll.ch
We want to only take the BKL on crap drivers, but to know whether
we have a crap driver we first need to look it up. Split this shuffle
out from the main BKL-disabling patch, for more clarity. Historical
aside: When the kernel-wide BKL was removed, it was replaced by
drm_global_mutex within the scope of the drm subsystem hence why these
two things are (almost) interchangeable as concepts here.
Since the minors are refcounted drm_minor_acquire is purely internal
and this does not have a driver visible effect.
v2: Push the locking even further into drm_open(), suggested by Chris.
This gives us more symmetry with drm_release(), and maybe a futuer
avenue where we make drm_global_mutex locking (partially) opt-in like
with drm_release_noglobal().
v3:
- Actually push this stuff correctly, don't unlock twice (Chris)
- Fix typo on commit message, plus explain why BKL = drm_global_mutex
(Sam)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204150146.2006481-5-daniel.vetter@ffwll.ch
Plus extend the kerneldoc a bit to explain how this should be used.
With the previous patch to drop the force restore the main user of
this function is not emphasis on the "I hold the internal master lock
already" aspect, so rename the function to match.
Suggested by Noralf.
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204150146.2006481-4-daniel.vetter@ffwll.ch
Instead check for master status, in case we've raced.
This is the last exception to the general rule that we restore fbcon
only when there's no master active. Compositors are supposed to drop
their master status before they switch to a different console back to
text mode (or just switch to text mode directly, without a vt switch).
This is known to break some subtests of kms_fbcon_fbt in igt, but they're
just wrong - it does a graphics/text mode switch for the vt without
updating the master status.
Also add a comment to the drm_client->restore hook that this is expected
going forward from all clients (there's currently just one).
v2: Also drop the force in pan_display
v3: Restore the _force to pan_display, this actually means _locked in that
path. Spotted by Noralf.
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204150146.2006481-3-daniel.vetter@ffwll.ch
This allows it to call the function without the lock held.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/352742/
The function is always called with deleted BOs.
While at it cleanup the indentation as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/352743/
Ghost BOs need to stick with the resv object only when the origin is imported.
This is a low hanging fruit to avoid OOM situations on evictions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/352740/
Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in
i915/display/intel_dp_link_training.c.
This also involves extracting the drm_i915_private device pointer from
the intel_dp type to use in the various macros.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-3-wambui.karugax@gmail.com
