We should never BUG_ON on any corruption in CTB descriptor as
data there can be also modified by the GuC. Instead we can
use flag "is_in_error" to indicate that we will not process
any further messages over this CTB (until reset).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120191817.50164-1-michal.wajdeczko@intel.com
We disabled rps while it appeared to be a contributing factor to system
instablity, as that is now resolved, re-enable RPS and see how we fare.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135604.1402572-1-chris@chris-wilson.co.uk
Using a clear page for scratch means that we have relatively benign
errors in case it is accidentally used, but that can be rather too
benign for debugging. If we poison the scratch, ideally it quickly
results in an obvious error.
v2: Set each page individually just in case we are using highmem for our
scratch page.
v3: Pick a new scratch register as MI_STORE_REGISTER_MEM does not work
with GPR0 on gen7, unbelievably.
v4: Haswell still considers 3DPRIM a privileged register!
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124115133.53360-1-chris@chris-wilson.co.uk
Due to the asynchronous nature of releasing our wakerefs, we can signal
the main GT wakeref as complete before the individual engines have
cleared their own wakerefs. During shutdown we assert that the engines
are indeed parked before we release them, but for this to be always true
we need to flush their workers as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124143339.140988-1-chris@chris-wilson.co.uk
Perhaps in some cases the BIOS/GOP or other firmware may turn on
PHY A but may not program the MUX correctly. Therefore, re-program
PHY A if it is determined after reading the VBT that the value
programmed for the MUX bit does not match the expected value.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121235848.8457-1-vivek.kasireddy@intel.com
Devices on the VMD domain use the VMD endpoint's requester ID and have been
relying on the VMD endpoint's DMA operations. The problem with this was
that VMD domain devices would use the VMD endpoint's attributes when doing
DMA and IOMMU mapping. We can be smarter about this by only using the VMD
endpoint when mapping and providing the correct child device's attributes
during DMA operations.
Remove the dma_map_ops redirect.
Link: https://lore.kernel.org/r/1579613871-301529-7-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Remove the sanity check required for VMD child devices. The new
pci_real_dma_dev() DMA alias mechanism places them in the same IOMMU group
as the VMD endpoint. Assignment of the group would require assigning the
VMD endpoint, where unbinding the VMD endpoint removes the child device
domain from the hierarchy.
Link: https://lore.kernel.org/r/1579613871-301529-6-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
The PCI device may have a DMA requester on another bus, such as VMD
subdevices needing to use the VMD endpoint. This case requires the real
DMA device for the IOMMU mapping, so use pci_real_dma_dev() to find that
device.
Link: https://lore.kernel.org/r/1579613871-301529-5-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
The current DMA alias implementation requires the aliased device be on the
same PCI bus as the requester ID. Add an arch-specific mechanism to point
to another PCI device when doing mapping and PCI DMA alias search. The
default case returns the actual device.
Link: https://lore.kernel.org/r/1579613871-301529-4-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Expose VMD's pci_dev pointer in struct pci_sysdata. This will be used
indirectly by intel-iommu.c to find the correct domain.
Link: https://lore.kernel.org/r/1579613871-301529-3-git-send-email-jonathan.derrick@intel.com
[bhelgaas: commit log]
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Various helpers need the pci_sysdata just to dereference a single field in
it. Add a little helper that returns the properly typed sysdata pointer to
require a little less boilerplate code.
[jonathan.derrick: to_pci_sysdata const argument]
Link: https://lore.kernel.org/r/1579613871-301529-2-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
- Add DMA nodes for am65x and j721e
- Add McASP nodes for am65x and j721e, showcasing the DMA usage
- Add CAL node for am65x
- Add OV5640 camera support for am65x
-----BEGIN PGP SIGNATURE-----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=dL57
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-soc-for-v5.6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt
Texas Instruments K3 SoC family changes for 5.6, part 2.
- Add DMA nodes for am65x and j721e
- Add McASP nodes for am65x and j721e, showcasing the DMA usage
- Add CAL node for am65x
- Add OV5640 camera support for am65x
* tag 'ti-k3-soc-for-v5.6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera
arm64: dts: ti: k3-am65-main Add CAL node
arm64: dts: ti: k3-j721e-main: Add McASP nodes
arm64: dts: ti: k3-am654-main: Add McASP nodes
arm64: dts: ti: k3-j721e: DMA support
arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss
arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation
arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS
arm64: dts: ti: k3-am65: DMA support
arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss
arm64: dts: ti: k3-am65-main: Correct main NAVSS representation
Link: https://lore.kernel.org/r/83546942-6215-9c3a-16cd-be7e7c000c0e@ti.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Running `make dt_binging_check`, gives the error:
DTC Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.example.dt.yaml
Error: Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.example.dts:20.41-42 syntax error
FATAL ERROR: Unable to parse input tree
This is because the example uses the macro GPIO_ACTIVE_HIGH which
is defined in gpio.h but the include of this header is missing.
Add the include to fix the error.
Fixes: f6f149604e ("dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy")
Link: https://lore.kernel.org/r/20200124105753.15976-1-dafna.hirschfeld@collabora.com
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Looks like we have wrong default memory size for beaglebone black,
it has at least 512 MB of RAM and not 256 MB. This causes an issue
when booted with GRUB2 that does not seem to pass memory info to
the kernel.
And for am43x-epos-evm the SPI pin directions need to be configured
for SPI to work.
-----BEGIN PGP SIGNATURE-----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=XXZc
-----END PGP SIGNATURE-----
Merge tag 'omap-for-fixes-whenever-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Few minor fixes for omaps
Looks like we have wrong default memory size for beaglebone black,
it has at least 512 MB of RAM and not 256 MB. This causes an issue
when booted with GRUB2 that does not seem to pass memory info to
the kernel.
And for am43x-epos-evm the SPI pin directions need to be configured
for SPI to work.
* tag 'omap-for-fixes-whenever-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1
ARM: dts: am335x-boneblack-common: fix memory size
Link: https://lore.kernel.org/r/pull-1579895109-287828@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
When TCP out-of-order is identified (unexpected tcp seq mismatch), driver
analyzes the packet and decides what handling should it get:
1. go to accelerated path (to be encrypted in HW),
2. go to regular xmit path (send w/o encryption),
3. drop.
Packets marked with skb->decrypted by the TLS stack in the TX flow skips
SW encryption, and rely on the HW offload.
Verify that such packets are never sent un-encrypted on the wire.
Add a WARN to catch such bugs, and prefer dropping the packet in these cases.
Fixes: 46a3ea9807 ("net/mlx5e: kTLS, Enhance TX resync flow")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The call to tx_post_resync_params() is done earlier in the flow,
the post of the control WQEs is unnecessarily repeated. Remove it.
Fixes: 700ec49742 ("net/mlx5e: kTLS, Fix missing SQ edge fill")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There are the following cases:
1. Packet ends before start marker: bypass offload.
2. Packet starts before start marker and ends after it: drop,
not supported, breaks contract with kernel.
3. packet ends before tls record info starts: drop,
this packet was already acknowledged and its record info
was released.
Add the above as comment in code.
Mind possible wraparounds of the TCP seq, replace the simple comparison
with a call to the TCP before() method.
In addition, remove logic that handles negative sync_len values,
as it became impossible.
Fixes: d2ead1f360 ("net/mlx5e: Add kTLS TX HW offload support")
Fixes: 46a3ea9807 ("net/mlx5e: kTLS, Enhance TX resync flow")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently VF in LEGACY mode are not able to go up. Also in OFFLOADS
mode, when switching to it first time, VF can go up independently to
his representor, which is not expected.
Perform clearing of VF config when switching modes and set link state
to AUTO as default value. Also, when switching to OFFLOADS mode set
link state to DOWN, which allow VF link state to be controlled by its
REP.
Fixes: 1ab2068a4c ("net/mlx5: Implement vports admin state backup/restore")
Fixes: 556b9d16d3 ("net/mlx5: Clear VF's configuration on disabling SRIOV")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Use raw_smp_processor_id instead of smp_processor_id() otherwise we will
get the following trace in debug-kernel:
BUG: using smp_processor_id() in preemptible [00000000] code: devlink
caller is dr_create_cq.constprop.2+0x31d/0x970 [mlx5_core]
Call Trace:
dump_stack+0x9a/0xf0
debug_smp_processor_id+0x1f3/0x200
dr_create_cq.constprop.2+0x31d/0x970
genl_family_rcv_msg+0x5fd/0x1170
genl_rcv_msg+0xb8/0x160
netlink_rcv_skb+0x11e/0x340
Fixes: 297cccebdc ("net/mlx5: DR, Expose an internal API to issue RDMA operations")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Since the implementation relies on limiting the VF transmit rate to
simulate ingress rate limiting, and since either uplink representor or
ecpf are not associated with a VF, we limit the rate limit configuration
for those ports.
Fixes: fcb64c0f56 ("net/mlx5: E-Switch, add ingress rate support")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The current code handles only counters that attached to dest, we still
have the cases where we have counter on non-dest, like over drop etc.
Fixes: 6a48faeeca ("net/mlx5: Add direct rule fs_cmd implementation")
Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add the upcoming ConnectX-7 device ID.
Fixes: 85327a9c41 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The pool sizes represent the pool sizes in the fw. when we request
a pool size from fw, it will return the next possible group.
We track how many pools the fw has left and start requesting groups
from the big to the small.
When we start request 4k group, which doesn't exists in fw, fw
wants to allocate the next possible size, 64k, but will fail since
its exhausted. The correct smallest pool size in fw is 128 and not 4k.
Fixes: e52c280240 ("net/mlx5: E-Switch, Add chains and priorities")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The stubbed version of alarmtimer_get_rtcdev() is not exported.
so this won't work if this function is used in a module when
CONFIG_RTC_CLASS=n.
Move the stub function to the header file and make it inline so that
callers don't have to worry about linking against this symbol.
rtcdev isn't used outside of this ifdef so it's not required to be
redefined to NULL. Drop that while touching this area.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200124055849.154411-4-swboyd@chromium.org
Use the wakeup source that can be associated with the 'alarmtimer'
platform device instead of registering another one by hand.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200124055849.154411-3-swboyd@chromium.org
The alarmtimer_suspend() function will fail if an RTC device is on a bus
such as SPI or i2c and that RTC device registers and probes after
alarmtimer_init() registers and probes the 'alarmtimer' platform device.
This is because system wide suspend suspends devices in the reverse order
of their probe. When alarmtimer_suspend() attempts to program the RTC for a
wakeup it will try to program an RTC device on a bus that has already been
suspended.
Move the alarmtimer device registration to happen when the RTC which is
used for wakeup is registered. Register the 'alarmtimer' platform device as
a child of the RTC device too, so that it can be guaranteed that the RTC
device won't be suspended when alarmtimer_suspend() is called.
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200124055849.154411-2-swboyd@chromium.org
This function doesn't do anything like this comment says when an RTC device
hasn't been chosen. It looks like we used to do something like that before
commit 8bc0dafb5c ("alarmtimers: Rework RTC device selection using class
interface") but that's long gone now. Remove this sentence to avoid
confusing the reader.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200124055849.154411-5-swboyd@chromium.org
skb->csum is updated incorrectly, when manipulation for
NF_NAT_MANIP_SRC\DST is done on IPV6 packet.
Fix:
There is no need to update skb->csum in inet_proto_csum_replace16(),
because update in two fields a.) IPv6 src/dst address and b.) L4 header
checksum cancels each other for skb->csum calculation. Whereas
inet_proto_csum_replace4 function needs to update skb->csum, because
update in 3 fields a.) IPv4 src/dst address, b.) IPv4 Header checksum
and c.) L4 header checksum results in same diff as L4 Header checksum
for skb->csum calculation.
[ pablo@netfilter.org: a few comestic documentation edits ]
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Signed-off-by: Andy Stracner <astracner@linkedin.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch introduces a list of pending module requests. This new module
list is composed of nft_module_request objects that contain the module
name and one status field that tells if the module has been already
loaded (the 'done' field).
In the first pass, from the preparation phase, the netlink command finds
that a module is missing on this list. Then, a module request is
allocated and added to this list and nft_request_module() returns
-EAGAIN. This triggers the abort path with the autoload parameter set on
from nfnetlink, request_module() is called and the module request enters
the 'done' state. Since the mutex is released when loading modules from
the abort phase, the module list is zapped so this is iteration occurs
over a local list. Therefore, the request_module() calls happen when
object lists are in consistent state (after fulling aborting the
transaction) and the commit list is empty.
On the second pass, the netlink command will find that it already tried
to load the module, so it does not request it again and
nft_request_module() returns 0. Then, there is a look up to find the
object that the command was missing. If the module was successfully
loaded, the command proceeds normally since it finds the missing object
in place, otherwise -ENOENT is reported to userspace.
This patch also updates nfnetlink to include the reason to enter the
abort phase, which is required for this new autoload module rationale.
Fixes: ec7470b834 ("netfilter: nf_tables: store transaction list locally while requesting module")
Reported-by: syzbot+29125d208b3dae9a7019@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This new helper function validates that unknown family and chain type
coming from userspace do not trigger an out-of-bound array access. Bail
out in case __nft_chain_type_get() returns NULL from
nft_chain_parse_hook().
Fixes: 9370761c56 ("netfilter: nf_tables: convert built-in tables/chains to chain types")
Reported-by: syzbot+156a04714799b1d480bc@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In the nft_indr_block_cb the chain should check the flag with
NFT_CHAIN_HW_OFFLOAD.
Fixes: 9a32669fec ("netfilter: nf_tables_offload: support indr block call")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The allocation mask is no longer used by on_each_cpu_cond() and
on_each_cpu_cond_mask() and can be removed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200117090137.1205765-4-bigeasy@linutronix.de
on_each_cpu_cond_mask() allocates a new CPU mask. The newly allocated
mask is a subset of the provided mask based on the conditional function.
This memory allocation can be avoided by extending smp_call_function_many()
with the conditional function and performing the remote function call based
on the mask and the conditional function.
Rename smp_call_function_many() to smp_call_function_many_cond() and add
the smp_cond_func_t argument. If smp_cond_func_t is provided then it is
used before invoking the function. Provide smp_call_function_many() with
cond_func set to NULL. Let on_each_cpu_cond_mask() use
smp_call_function_many_cond().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200117090137.1205765-3-bigeasy@linutronix.de
Use a typdef for the conditional function instead defining it each time in
the function prototype.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200117090137.1205765-2-bigeasy@linutronix.de
- Conversion of the SiFive PLIC to hierarchical domains
- New SiFive GPIO irqchip driver
- New Aspeed SCI irqchip driver
- New NXP INTMUX irqchip driver
- Additional support for the Meson A1 GPIO irqchip
- First part of the GICv4.1 support
- Assorted fixes
-----BEGIN PGP SIGNATURE-----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=8iz1
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Conversion of the SiFive PLIC to hierarchical domains
- New SiFive GPIO irqchip driver
- New Aspeed SCI irqchip driver
- New NXP INTMUX irqchip driver
- Additional support for the Meson A1 GPIO irqchip
- First part of the GICv4.1 support
- Assorted fixes
Currently, kmemdup is applied to the firmware data, and it invokes
kmalloc under the hood. The firmware size and patch_length are big (more
than PAGE_SIZE), and on some low-end systems (like ASUS E202SA) kmalloc
may fail to allocate a contiguous chunk under high memory usage and
fragmentation:
Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821a_fw.bin
kworker/u9:2: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
<stack trace follows>
As firmware load happens on each resume, Bluetooth will stop working
after several iterations, when the kernel fails to allocate an order-4
page.
This patch replaces kmemdup with kvmalloc+memcpy. It's not required to
have a contiguous chunk here, because it's not mapped to the device
directly.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Long ago, RCU used the stop-machine mechanism to implement expedited
grace periods, but no longer does so. This commit therefore removes
the no-longer-needed #includes of linux/stop_machine.h.
Link: https://lwn.net/Articles/805317/
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
'read_barrier_depends()' doesn't exist anymore so stop talking about it.
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The ->srcu_last_gp_end field is accessed from any CPU at any time
by synchronize_srcu(), so non-initialization references need to use
READ_ONCE() and WRITE_ONCE(). This commit therefore makes that change.
Reported-by: syzbot+08f3e9d26e5541e1ecf2@syzkaller.appspotmail.com
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, force_qs_rnp() uses a for_each_leaf_node_possible_cpu()
loop containing a check of the current CPU's bit in ->qsmask.
This works, but this commit saves three lines by instead using
for_each_leaf_node_cpu_mask(), which combines the functionality of
for_each_leaf_node_possible_cpu() and leaf_node_cpu_bit(). This commit
also replaces the use of the local variable "bit" with rdp->grpmask.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the rcu_{expedited,normal} definitions from
kernel/rcu/update.c to include/linux/rcupdate.h to make sure they are
in sync, and also to avoid the following warning from sparse:
kernel/ksysfs.c:150:5: warning: symbol 'rcu_expedited' was not declared. Should it be static?
kernel/ksysfs.c:167:5: warning: symbol 'rcu_normal' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Only tree_stall.h needs to get name from GP state, so this commit
moves the gp_state_names[] array and the gp_state_getname()
from kernel/rcu/tree.h and kernel/rcu/tree.c, respectively, to
kernel/rcu/tree_stall.h. While moving gp_state_names[], this commit
uses the GCC syntax to ensure that the right string is associated with
the right CPP macro.
Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The call_rcu() function is an external RCU API that is declared in
include/linux/rcupdate.h. There is thus no point in redeclaring it
in kernel/rcu/tree.h, so this commit removes that redundant declaration.
Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
