When the APCS clock is registered (platform dependent), it retrieves
its parent names from hardcoded values in the driver.
The following commit allows the DT node to provide such clock names to
the platform data based clock driver therefore avoiding having to
explicitly embed those names in the clock driver source code.
Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lkml.kernel.org/r/20191125135910.679310-2-niklas.cassel@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
It turns out booting the modem is dependent on a bimc vote from Linux on
msm8998. To make the modem happy, add the bimc clock to rely on the
default vote from rpmcc. Once we have interconnect support, bimc should
be controlled properly.
Fixes: 6131dc8121 ("clk: qcom: smd: Add support for MSM8998 rpm clocks")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191217165409.4919-1-jeffrey.l.hugo@gmail.com
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Mark the msm8998 cpu CX gdsc as votable and use the hw control to avoid
corner cases with SMMU per hardware documentation.
Fixes: 3f7df5baa2 ("clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191217171905.5619-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a driver for the multimedia clock controller found on MSM8998
based devices. This should allow most multimedia device drivers
to probe and control their clocks.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lkml.kernel.org/r/1576596033-10189-1-git-send-email-jhugo@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the qcom,mmcc-X clock controller binding to DT schema. Add the
protected-clocks property to the schema to show that is it explicitly
allowed, instead of relying on the generic, pre-schema binding.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/1576596003-10093-1-git-send-email-jhugo@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The global clock controller on MSM8998 can consume a number of external
clocks. Document them.
For 7180 and 8150, the hardware always exists, so no clocks are truly
optional. Therefore, simplify the binding by removing the min/max
qualifiers to clocks. Also, fixup an example so that dt_binding_check
passes.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/1576595987-10043-1-git-send-email-jhugo@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
gfx3d_clk_src for msm8974 was introduced into the MMCC by
commit d8b212014e ("clk: qcom: Add support for MSM8974's multimedia
clock controller (MMCC)") to ensure that all of the clocks for
this platform are documented upstream. This clock actually belongs
on the RPM. Since then, commit 685dc94b7d ("clk: qcom: smd-rpmcc:
Add msm8974 clocks") was introduced, which contains the proper
definition for gfx3d_clk_src. Let's drop the definition from the
mmcc and register the clock with the rpm instead.
This change was tested on a Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lkml.kernel.org/r/20191115123931.18919-1-masneyb@onstation.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Randomize the layout of key selinux data structures.
Initially this is applied to the selinux_state, selinux_ss,
policydb, and task_security_struct data structures.
NB To test/use this mechanism, one must install the
necessary build-time dependencies, e.g. gcc-plugin-devel on Fedora,
and enable CONFIG_GCC_PLUGIN_RANDSTRUCT in the kernel configuration.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: Kees Cook <keescook@chromium.org>
[PM: double semi-colon fixed]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rename selinux_enabled to selinux_enabled_boot to make it clear that
it only reflects whether SELinux was enabled at boot. Replace the
references to it in the MAC_STATUS audit log in sel_write_enforce()
with hardcoded "1" values because this code is only reachable if SELinux
is enabled and does not change its value, and update the corresponding
MAC_STATUS audit log in sel_write_disable(). Stop clearing
selinux_enabled in selinux_disable() since it is not used outside of
initialization code that runs before selinux_disable() can be reached.
Mark both selinux_enabled_boot and selinux_enforcing_boot as __initdata
since they are only used in initialization code.
Wrap the disabled field in the struct selinux_state with
CONFIG_SECURITY_SELINUX_DISABLE since it is only used for
runtime disable.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Andrii Nakryiko says:
====================
Based on latest feedback and discussions, this patch set implements the
following changes:
- Kconfig-provided externs have to be in .kconfig section, for which
bpf_helpers.h provides convenient __kconfig macro (Daniel);
- instead of allowing to override Kconfig file path, switch this to ability to
extend and override system Kconfig with user-provided custom values (Alexei);
- BTF is required when externs are used.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of all or nothing approach of overriding Kconfig file location, allow
to extend it with extra values and override chosen subset of values though
optional user-provided extra config, passed as a string through open options'
.kconfig option. If same config key is present in both user-supplied config
and Kconfig, user-supplied one wins. This allows applications to more easily
test various conditions despite host kernel's real configuration. If all of
BPF object's __kconfig externs are satisfied from user-supplied config, system
Kconfig won't be read at all.
Simplify selftests by not needing to create temporary Kconfig files.
Suggested-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191219002837.3074619-3-andriin@fb.com
There are cases in which BPF resource (program, map, etc) has to outlive
userspace program that "installed" it in the system in the first place.
When BPF program is attached, libbpf returns bpf_link object, which
is supposed to be destroyed after no longer necessary through
bpf_link__destroy() API. Currently, bpf_link destruction causes both automatic
detachment and frees up any resources allocated to for bpf_link in-memory
representation. This is inconvenient for the case described above because of
coupling of detachment and resource freeing.
This patch introduces bpf_link__disconnect() API call, which marks bpf_link as
disconnected from its underlying BPF resouces. This means that when bpf_link
is destroyed later, all its memory resources will be freed, but BPF resource
itself won't be detached.
This design allows to follow strict and resource-leak-free design by default,
while giving easy and straightforward way for user code to opt for keeping BPF
resource attached beyond lifetime of a bpf_link. For some BPF programs (i.e.,
FS-based tracepoints, kprobes, raw tracepoint, etc), user has to make sure to
pin BPF program to prevent kernel to automatically detach it on process exit.
This should typically be achived by pinning BPF program (or map in some cases)
in BPF FS.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191218225039.2668205-1-andriin@fb.com
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCXfrLASAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0pZfAQD9F5Vjdqp3fWk+
pxt+eD9+xaD2MYuSVO2AEVBC949vdQD/TP7xnb66w7n9YtMtm9MgvysHAakJYeAe
l4XsHAiPHgI=
=CFIs
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Bunch of fixes for rc3"
* tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm/tpm_ftpm_tee: add shutdown call back
tpm: selftest: cleanup after unseal with wrong auth/policy test
tpm: selftest: add test covering async mode
tpm: fix invalid locking in NONBLOCKING mode
security: keys: trusted: fix lost handle flush
tpm_tis: reserve chip for duration of tpm_tis_core_init
KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails
KEYS: remove CONFIG_KEYS_COMPAT
"Battery mode" is the name of the register, the bit manipulated by this
code is "CAPACITY_MODE" (Smart Battery System Specifications).
Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
allow to pass skb's mark field into bpf_prog_test_run ctx
for BPF_PROG_TYPE_SCHED_CLS prog type. that would allow
to test bpf programs which are doing decision based on this
field
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Work-around what appears to be a bug in rst2man convertion tool, used to
create man pages out of reStructureText-formatted documents. If text line
starts with dot, rst2man will put it in resulting man file verbatim. This
seems to cause man tool to interpret it as a directive/command (e.g., `.bs`), and
subsequently not render entire line because it's unrecognized one.
Enclose '.xxx' words in extra formatting to work around.
Fixes: cb21ac5885 ("bpftool: Add gen subcommand manpage")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com
Link: https://lore.kernel.org/bpf/20191218221707.2552199-1-andriin@fb.com
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Change format string referring to just single argument out of two available.
Some versions of libc can reject such format string.
Reported-by: Nikita Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218214314.2403729-1-andriin@fb.com
When a device has no support to get the charger number of ports, it
doesn't have to result in a dev_err(), print saying "Could not get
charger port count" using a dev_info() would suffice. In such case,
the dev_info() message is already printed but the dev_err() is annoying,
specially, on those devices that doesn't support the command. So remove
the dev_err().
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Notify core through power_supply_changed() in case of changes in state
of charge and power supply status. This is useful for user-space to
efficiently update current battery level.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
For configuration of fuel gauge alert for a low level state of charge
interrupt we add a function to config level threshold and a device tree
binding property to set it in flatned device tree node.
Now we can use "maxim,alert-low-soc-level" property with the values from
1% up to 32% to configure alert interrupt threshold.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
According datasheet max17040 has a pin for alert host for low SOC.
This pin can be used as external interrupt, so we need to check for
interrupts assigned for device and handle it.
In handler we are checking and storing fuel gauge registers values
and send an uevent to notificate user space, so user space can decide
save work or turn off since the alert demonstrate that the battery may
no have the power to keep the system turned on for much longer.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Documentation of max17040 based fuel gauge characteristics.
For configure low level state of charge threshold alert signaled from
max17043/max17044 we add "maxim,alert-low-soc-level" property.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There are some deviations between the real resistance and the ideal
resistance of coulomb counter, which will affect the accuracy of
the coulomb counter, thus calibrate the real resistance of coulomb
counter to improve the accuracy.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a new property to describe the real resistance of coulomb counter chip,
which is used to calibrate the accuracy of the coulomb counter chip.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Optimize the battery internal resistance in a certain temerature to
get a accurate battery internal resistance.
Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since the battery internal resistance can be changed with the temperature
changes, thus add a resistance temperature table support to look up
the accurate battery internal resistance in a certain temperature.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since the battery internal resistance can be changed as the temperature
changes, thus add one table to describe the battery resistance percent
in different temperatures to get a accurate battery internal resistance.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add shutdown call back to close existing session with fTPM TA
to support kexec scenario.
Add parentheses to function names in comments as specified in kdoc.
Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
We need the of_match table if we want to use the compatible string in
the pmic's child node and get the charger driver loaded automatically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The MAX17055 is very similar to the MAX17042 so extend the driver.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The bindings are missing documentation for some of the compatible
strings.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
For some devices userspace needs the ability to completely cut the power
to the USB devices connected to the charge controller. An easy way to
achieve this is by allowing 0 as a valid max current and forcibly disable
the output in that case, as well as enable it again if the regulator is
in use and a non-0 max current is set.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The ADC in the JZ4740 can work either in high-precision mode with a 2.5V
range, or in low-precision mode with a 7.5V range. The code in place in
this driver will select the proper scale according to the maximum
voltage of the battery.
The JZ4770 however only has one mode, with a 6.6V range. If only one
scale is available, there's no need to change it (and nothing to change
it to), and trying to do so will fail with -EINVAL.
Fixes: fb24ccfbe1 ("power: supply: add Ingenic JZ47xx battery driver.")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The driver forgets to unregister the notifier in remove.
Add the call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The driver forgets to call component_del in remove to match component_add
in probe.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.net>
It is completely wrong to check for compile-time MIPS ISA revision in
the body of bpf_int_jit_compile() as it may lead to get MIPS JIT fully
omitted by the CC while the rest system will think that the JIT is
actually present and works [1].
We can check if the selected CPU really supports MIPS eBPF JIT at
configure time and avoid such situations when kernel can be built
without both JIT and interpreter, but with CONFIG_BPF_SYSCALL=y.
[1] https://lore.kernel.org/linux-mips/09d713a59665d745e21d021deeaebe0a@dlink.ru/
Fixes: 716850ab10 ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture.")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Commit 716850ab10 ("MIPS: eBPF: Initial eBPF support for MIPS32
architecture.") enabled our eBPF JIT for MIPS32 kernels, whereas it has
previously only been availailable for MIPS64. It was my understanding at
the time that the BPF test suite was passing & JITing a comparable
number of tests to our cBPF JIT [1], but it turns out that was not the
case.
The eBPF JIT has a number of problems on MIPS32:
- Most notably various code paths still result in emission of MIPS64
instructions which will cause reserved instruction exceptions & kernel
panics when run on MIPS32 CPUs.
- The eBPF JIT doesn't account for differences between the O32 ABI used
by MIPS32 kernels versus the N64 ABI used by MIPS64 kernels. Notably
arguments beyond the first 4 are passed on the stack in O32, and this
is entirely unhandled when JITing a BPF_CALL instruction. Stack space
must be reserved for arguments even if they all fit in registers, and
the callee is free to assume that stack space has been reserved for
its use - with the eBPF JIT this is not the case, so calling any
function can result in clobbering values on the stack & unpredictable
behaviour. Function arguments in eBPF are always 64-bit values which
is also entirely unhandled - the JIT still uses a single (32-bit)
register per argument. As a result all function arguments are always
passed incorrectly when JITing a BPF_CALL instruction, leading to
kernel crashes or strange behavior.
- The JIT attempts to bail our on use of ALU64 instructions or 64-bit
memory access instructions. The code doing this at the start of
build_one_insn() incorrectly checks whether BPF_OP() equals BPF_DW,
when it should really be checking BPF_SIZE() & only doing so when
BPF_CLASS() is one of BPF_{LD,LDX,ST,STX}. This results in false
positives that cause more bailouts than intended, and that in turns
hides some of the problems described above.
- The kernel's cBPF->eBPF translation makes heavy use of 64-bit eBPF
instructions that the MIPS32 eBPF JIT bails out on, leading to most
cBPF programs not being JITed at all.
Until these problems are resolved, revert the enabling of the eBPF JIT
on MIPS32 done by commit 716850ab10 ("MIPS: eBPF: Initial eBPF support
for MIPS32 architecture.").
Note that this does not undo the changes made to the eBPF JIT by that
commit, since they are a useful starting point to providing MIPS32
support - they're just not nearly complete.
[1] https://lore.kernel.org/linux-mips/MWHPR2201MB13583388481F01A422CE7D66D4410@MWHPR2201MB1358.namprd22.prod.outlook.com/
Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: 716850ab10 ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture.")
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: Tony Ambardar <itugrok@yahoo.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: <stable@vger.kernel.org> # v5.2+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
__sanitizer_cov_trace_pc() is not linked in and causing link
failure if KCOV_INSTRUMENT is enabled. Fix this by disabling
instrumentation for compressed image.
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: linux-mips@vger.kernel.org
