Rename davinci_mdio DT node "ethernet"->"mdio"
This fixes the following DT schemas check errors:
am3517-craneboard.dt.yaml: ethernet@5c030000: $nodename:0: 'ethernet@5c030000' does not match '^mdio(@.*)?'
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
AM571x/AM572x/AM574x IDK base boards have HDMI output. Add DT nodes to
am57xx-idk-common.dtsi to enable HDMI.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fixes coccicheck warning:
drivers/bus/ti-sysc.c:506:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The scheduler code calling cpufreq_update_util() may run during CPU
offline on the target CPU after the IRQ work lists have been flushed
for it, so the target CPU should be prevented from running code that
may queue up an IRQ work item on it at that point.
Unfortunately, that may not be the case if dvfs_possible_from_any_cpu
is set for at least one cpufreq policy in the system, because that
allows the CPU going offline to run the utilization update callback
of the cpufreq governor on behalf of another (online) CPU in some
cases.
If that happens, the cpufreq governor callback may queue up an IRQ
work on the CPU running it, which is going offline, and the IRQ work
may not be flushed after that point. Moreover, that IRQ work cannot
be flushed until the "offlining" CPU goes back online, so if any
other CPU calls irq_work_sync() to wait for the completion of that
IRQ work, it will have to wait until the "offlining" CPU is back
online and that may not happen forever. In particular, a system-wide
deadlock may occur during CPU online as a result of that.
The failing scenario is as follows. CPU0 is the boot CPU, so it
creates a cpufreq policy and becomes the "leader" of it
(policy->cpu). It cannot go offline, because it is the boot CPU.
Next, other CPUs join the cpufreq policy as they go online and they
leave it when they go offline. The last CPU to go offline, say CPU3,
may queue up an IRQ work while running the governor callback on
behalf of CPU0 after leaving the cpufreq policy because of the
dvfs_possible_from_any_cpu effect described above. Then, CPU0 is
the only online CPU in the system and the stale IRQ work is still
queued on CPU3. When, say, CPU1 goes back online, it will run
irq_work_sync() to wait for that IRQ work to complete and so it
will wait for CPU3 to go back online (which may never happen even
in principle), but (worse yet) CPU0 is waiting for CPU1 at that
point too and a system-wide deadlock occurs.
To address this problem notice that CPUs which cannot run cpufreq
utilization update code for themselves (for example, because they
have left the cpufreq policies that they belonged to), should also
be prevented from running that code on behalf of the other CPUs that
belong to a cpufreq policy with dvfs_possible_from_any_cpu set and so
in that case the cpufreq_update_util_data pointer of the CPU running
the code must not be NULL as well as for the CPU which is the target
of the cpufreq utilization update in progress.
Accordingly, change cpufreq_this_cpu_can_update() into a regular
function in kernel/sched/cpufreq.c (instead of a static inline in a
header file) and make it check the cpufreq_update_util_data pointer
of the local CPU if dvfs_possible_from_any_cpu is set for the target
cpufreq policy.
Also update the schedutil governor to do the
cpufreq_this_cpu_can_update() check in the non-fast-switch
case too to avoid the stale IRQ work issues.
Fixes: 99d14d0e16 ("cpufreq: Process remote callbacks from any CPU if the platform permits")
Link: https://lore.kernel.org/linux-pm/20191121093557.bycvdo4xyinbc5cb@vireshk-i7/
Reported-by: Anson Huang <anson.huang@nxp.com>
Tested-by: Anson Huang <anson.huang@nxp.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Peng Fan <peng.fan@nxp.com> (i.MX8QXP-MEK)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The OMAP IOMMU driver no longer uses the pm_runtime_irq_safe() API
after commit 1432ebbd60 ("iommu/omap: remove pm_runtime_irq_safe
flag for OMAP IOMMUs"), so the SYSC_QUIRK_LEGACY_IDLE quirk is no
longer needed for MMU devices. Drop the same.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
For dra7 dcan and dwc3 instances we need to block clockdomain autoidle.
Let's do this with CLKDM_NOAUTO quirk flag and enable it for dcan and
dwc3.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The data type of the target_residency_ns field in struct cpuidle_state
is u64, so it does not need to be cast into u64.
Get rid of the unnecessary type cast.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since blk_drain_queue had already been removed, so this function
is not needed anymore.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A device mapping is normally always mapped at Stage-2, since there
is very little gain in having it faulted in.
Nonetheless, it is possible to end-up in a situation where the device
mapping has been removed from Stage-2 (userspace munmaped the VFIO
region, and the MMU notifier did its job), but present in a userspace
mapping (userpace has mapped it back at the same address). In such
a situation, the device mapping will be demand-paged as the guest
performs memory accesses.
This requires to be careful when dealing with mapping size, cache
management, and to handle potential execution of a device mapping.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191211165651.7889-2-maz@kernel.org
We have dts property for "ti,sysc-delay-us", and we're using it, but the
wait after OCP softreset only happens if devices are probed in legacy mode.
Let's add a delay after writing the OCP softreset when specified.
Fixes: e0db94fe87 ("bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits")
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Remove MODULE_VERSION(), as it isn't needed at all: the only version
making sense is the kernel version.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Clean up the drivers with the new managed buffer allocation API.
The superfluous snd_pcm_lib_malloc_pages() and
snd_pcm_lib_free_pages() calls are dropped.
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191211172019.23206-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the drivers with the new managed buffer allocation API.
The superfluous snd_pcm_lib_malloc_pages() and
snd_pcm_lib_free_pages() calls are dropped, as well as the superfluous
snd_pcm_lib_preallocate_free_for_all() call. As of the result,
hw_free and pcm_destruct ops became empty and got removed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191211172019.23206-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Early revisions of the AST2600 datasheet are conflicted about the state
of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED
determined that the reference pinmux configuration tables were in error
and the SCU documentation contained the correct configuration. Update
the driver to reflect the state described in the SCU documentation.
Fixes: 2eda1cdec4 ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20191202050110.15340-1-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The IDE driver creates some passthru requests which never get
submitted to the block layer in such a way that blk_account_io_start()
gets called. However, the driver still calls __blk_mq_end_request() in
ide_end_rq() which will call blk_account_io_completion() which tries
to dereferences req->part which is never set. See ide_prep_sense() for
an example of where these requests come from.
To fix this, blk_account_io_completion() and blk_account_io_done()
should do nothing if req->part is not set.
The back trace of this bug is:
BUG: kernel NULL pointer dereference, address: 000002ac
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
*pde = 00000000
Oops: 0002 [#1]
CPU: 0 PID: 237 Comm: kworker/0:1H Not tainted
5.4.0-rc2-00011-g48d9b0d43105e #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1
04/01/2014
Workqueue: kblockd drive_rq_insert_work
EIP: blk_account_io_completion+0x7a/0xf0
Code: 89 54 24 08 31 d2 89 4c 24 04 31 c9 c7 04 24 02 00 00 00 c1 ee
09 e8 f5 21 a6 ff e8 70 5c a7 ff 8b 53 60 8d 04 bd 00 00 00 00 <01> b4
02 ac 02 00 00 8b 9a 88 02 00 00 85 db 74 11 85 d2 74 51 8b
EAX: 00000000 EBX: f5b80000 ECX: 00000000 EDX: 00000000
ESI: 00000000 EDI: 00000000 EBP: f3031e70 ESP: f3031e54
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010046
CR0: 80050033 CR2: 000002ac CR3: 03c25000 CR4: 000406d0
Call Trace:
<IRQ>
blk_update_request+0x85/0x420
ide_end_rq+0x38/0xa0
ide_complete_rq+0x3d/0x70
cdrom_newpc_intr+0x258/0xba0
ide_intr+0x135/0x250
__handle_irq_event_percpu+0x3e/0x250
handle_irq_event_percpu+0x1f/0x50
handle_irq_event+0x32/0x60
handle_level_irq+0x6c/0x110
handle_irq+0x72/0xa0
</IRQ>
do_IRQ+0x45/0xad
common_interrupt+0x115/0x11c
Fixes: 48d9b0d431 ("block: account statistics for passthrough requests")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Query for corresponding feature before calling EEMI API
from the driver.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
This patch adds dr_mode property to the usb node for
zynqmp boards.
Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The #clock-cells and clock-accuracy properties are all expressed in
decimal, except for the drm-clock. Fix it, as decimal is easier to read
for those properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
It may cause timeout waiting for sem acquire in VM flush when using
invalidate semaphore for picasso. So it needs to avoid using invalidate
semaphore for piasso.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f2efc6e600.
This was fixed properly for 5.5, but came back via 5.4 merge
into drm-next, so revert it again.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the new compatible string for ZynqMP SD Host Controller for its use
in the Arasan SDHCI driver for some of the ZynqMP specific operations.
Add required properties for the same.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
From "KEYS: Measure keys when they are created or updated" cover letter:
Keys created or updated in the system are currently not measured.
Therefore an attestation service, for instance, would not be able to
attest whether or not the trusted keys keyring(s), for instance, contain
only known good (trusted) keys.
IMA measures system files, command line arguments passed to kexec,
boot aggregate, etc. It can be used to measure keys as well.
But there is no mechanism available in the kernel for IMA to
know when a key is created or updated.
This change aims to address measuring keys created or updated
in the system.
To achieve the above the following changes have been made:
- Added a new IMA hook namely, ima_post_key_create_or_update, which
measures the key. This IMA hook is called from key_create_or_update
function. The key measurement can be controlled through IMA policy.
A new IMA policy function KEY_CHECK has been added to measure keys.
"keyrings=" option can be specified for KEY_CHECK to limit
measuring the keys loaded onto the specified keyrings only.
uid can be specified to further restrict key measurement for keys
created by specific user.
# measure keys loaded onto any keyring
measure func=KEY_CHECK
# measure keys loaded onto the IMA keyring only for root user
measure func=KEY_CHECK uid=0 keyring=".ima"
# measure keys on the BUILTIN and IMA keyrings into a different PCR
measure func=KEY_CHECK keyring=".builtin_trusted_keys|.ima" pcr=11
Read "keyrings=" option, if specified in the IMA policy, and store in
the list of IMA rules when the configured IMA policy is read.
This patch defines a new policy token enum namely Opt_keyrings
and an option flag IMA_KEYRINGS for reading "keyrings=" option
from the IMA policy.
Updated ima_parse_rule() to parse "keyrings=" option in the policy.
Updated ima_policy_show() to display "keyrings=" option.
The following example illustrates how key measurement can be verified.
Sample "key" measurement rule in the IMA policy:
measure func=KEY_CHECK uid=0 keyrings=.ima|.evm template=ima-buf
Display "key" measurement in the IMA measurement list:
cat /sys/kernel/security/ima/ascii_runtime_measurements
10 faf3...e702 ima-buf sha256:27c915b8ddb9fae7214cf0a8a7043cc3eeeaa7539bcb136f8427067b5f6c3b7b .ima 308202863082...4aee
Verify "key" measurement data for a key added to ".ima" keyring:
cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements | grep -m 1 "\.ima" | cut -d' ' -f 6 | xxd -r -p |tee ima-cert.der | sha256sum | cut -d' ' -f 1
The output of the above command should match the template hash
of the first "key" measurement entry in the IMA measurement list for
the key added to ".ima" keyring.
The file namely "ima-cert.der" generated by the above command
should be a valid x509 certificate (in DER format) and should match
the one that was used to import the key to the ".ima" keyring.
The certificate file can be verified using openssl tool.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Limit measuring keys to those keys being loaded onto a given set of
keyrings only and when the user id (uid) matches if uid is specified
in the policy.
This patch defines a new IMA policy option namely "keyrings=" that
can be used to specify a set of keyrings. If this option is specified
in the policy for "measure func=KEY_CHECK" then only the keys
loaded onto a keyring given in the "keyrings=" option are measured.
If uid is specified in the policy then the key is measured only if
the current user id matches the one specified in the policy.
Added a new parameter namely "keyring" (name of the keyring) to
process_buffer_measurement(). The keyring name is passed to
ima_get_action() to determine the required action.
ima_match_rules() is updated to check keyring in the policy, if
specified, for KEY_CHECK function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Call the IMA hook from key_create_or_update() function to measure
the payload when a new key is created or an existing key is updated.
This patch adds the call to the IMA hook from key_create_or_update()
function to measure the key on key create or update.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Measure asymmetric keys used for verifying file signatures,
certificates, etc.
This patch defines a new IMA hook namely ima_post_key_create_or_update()
to measure the payload used to create a new asymmetric key or
update an existing asymmetric key.
Asymmetric key structure is defined only when
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is defined. Since the IMA hook
measures asymmetric keys, the IMA hook is defined in a new file namely
ima_asymmetric_keys.c which is built only if
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is defined.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Measure keys loaded onto any keyring.
This patch defines a new IMA policy func namely KEY_CHECK to
measure keys. Updated ima_match_rules() to check for KEY_CHECK
and ima_parse_rule() to handle KEY_CHECK.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
process_buffer_measurement() may be called prior to IMA being
initialized (for instance, when the IMA hook is called when
a key is added to the .builtin_trusted_keys keyring), which
would result in a kernel panic.
This patch adds the check in process_buffer_measurement()
to return immediately if IMA is not initialized yet.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The integrity_kernel_read() call in ima_calc_file_hash_tfm() can return
a value of 0 before all bytes of the file are read. A value of 0 would
normally indicate an EOF. This has been observed if a user process is
causing a file appraisal and is terminated with a SIGTERM signal. The
most common occurrence of seeing the problem is if a shutdown or systemd
reload is initiated while files are being appraised.
The problem is similar to commit <f5e1040196> (ima: always return
negative code for error) that fixed the problem in
ima_calc_file_hash_atfm().
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Patrick Callaghan <patrickc@linux.ibm.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
task_security_struct was obtained at the beginning of may_create
and selinux_inode_init_security, no need to obtain again.
may_create will be called very frequently when create dir and file.
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Yang Guo <guoyang2@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In prepare_namespace(), do_mount() can be used instead of ksys_mount()
as the first and third argument are const strings in the kernel, the
second and fourth argument are passed through anyway, and the fifth
argument is NULL.
In do_mount_root(), ksys_mount() is called with the first and third
argument being already kernelspace strings, which do not need to be
copied over from userspace to kernelspace (again). The second and
fourth arguments are passed through to do_mount() anyway. The fifth
argument, while already residing in kernelspace, needs to be put into
a page of its own. Then, do_mount() can be used instead of
ksys_mount().
Once this is done, there are no in-kernel users to ksys_mount() left,
which can therefore be removed.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
All three calls to ksys_mount() in initrd-related kernel code can
be switched over to do_mount():
- the first and third arguments are const strings in the kernel,
and do not need to be copied over from userspace;
- the fifth argument is NULL, and therefore no page needs to be,
copied over from userspace;
- the second and fourth argument are passed through anyway.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
In devtmpfs, do_mount() can be called directly instead of complex wrapping
by ksys_mount():
- the first and third arguments are const strings in the kernel,
and do not need to be copied over from userspace;
- the fifth argument is NULL, and therefore no page needs to be
copied over from userspace;
- the second and fourth argument are passed through anyway.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
A break interrupt will be generated if the RX line was pulled low, which
means some abnomal behaviors occurred of the UART. In this case, we still
need to clear this break interrupt status, otherwise it will cause irq
storm to crash the whole system.
Fixes: b7396a38fb ("tty/serial: Add Spreadtrum sc9836-uart driver support")
Signed-off-by: Yonghan Ye <yonghan.ye@unisoc.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/925e51b73099c90158e080b8f5bed9b3b38c4548.1575460601.git.baolin.wang7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the commit 677fe555cb ("serial: imx: Fix recursive locking bug")
has mentioned the uart driver might cause recursive locking between
normal printing and the kernel debugging facilities (e.g. sysrq and
oops). In the commit it gave out suggestion for fixing recursive
locking issue: "The solution is to avoid locking in the sysrq case
and trylock in the oops_in_progress case."
This patch follows the suggestion (also used the exactly same code with
other serial drivers, e.g. amba-pl011.c) to fix the recursive locking
issue, this can avoid stuck caused by deadlock and print out log for
sysrq and oops.
Fixes: 04896a77a9 ("msm_serial: serial driver for MSM7K onboard serial peripheral.")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original ID that was added for Comet Lake PCH was
actually for the -LP (low power) variant even though the
constant for it said CMLH. Changing that while at it.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191212093713.60614-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM_ERRATA_814220 has below description:
The v7 ARM states that all cache and branch predictor maintenance
operations that do not specify an address execute, relative to
each other, in program order.
However, because of this erratum, an L2 set/way cache maintenance
operation can overtake an L1 set/way cache maintenance operation.
This ERRATA only affected the Cortex-A7 and present in r0p2, r0p3,
r0p4, r0p5.
i.MX6UL and i.MX7D have Cortex-A7 r0p5 inside, need to enable
ARM_ERRATA_814220 for proper workaround.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX7ULP's unique ID layout in OCOTP is different from other
i.MX6/7 SoCs as below:
OCOTP layout unique ID
0x4b0 bit[15:0] bit[15:0]
0x4c0 bit[15:0] bit[31:16]
0x4d0 bit[15:0] bit[47:32]
0x4e0 bit[15:0] bit[63:48]
Add support for reading serial number from OCOTP on i.MX7ULP.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On non-debug builds we were not using i915 param and thus
we may cause "unused variable" warning/error if caller was
not using i915 elsewhere. Let compiler see this param.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212121903.72524-1-michal.wajdeczko@intel.com
Some pinmuxings are obviously wrong, originating from a copy/paste
error. This patch corrects that with the following strategy:
- Set all reserved bits to zero
- Leave drive strength and slew rate as is
- Add sensible pull and hysteresis depending on the function of the pin
- Not used pins are muxed to their reset-value defined by the SoC
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The dbg() macro for the driver is not needed at all, all drivers should
use the common dynamic debugging infrastructure, not roll their own. So
delete the custom macro and convert the driver to use dev_dbg() instead,
providing a lot more information than the previous macro provided.
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Hyunki Koo <kkoos00@naver.com>
Cc: HYUN-KI KOO <hyunki00.koo@samsung.com>
Cc: Shinbeom Choi <sbeom.choi@samsung.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20191210143706.3928480-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
