It got separated from VCN2.0 with a new jpeg_v2_0_ip_block
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They will be used for JPEG2.0 and later.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From VCN2.0, JPEG2.0 is a separated IP block.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
JPEG1.0 will be functional along with VCN1.0
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For VCN1.0, the separation is just in code wise, JPEG1.0 HW is still
included in the VCN1.0 HW.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will be used for all versions of JPEG eventually. Previous
JPEG tests will be removed later since they are still used by
JPEG2.x.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will be used for JPEG IP 1.0, 2.0, 2.5 and later.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. no need to allocate an extra member for 'mqd_backup' array
2. backup/restore mqd to/from the correct 'mqd_backup' array slot
v2: warning fix (Alex)
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When userspace writes into the GTT itself, it is supposed to call
set-domain to let the kernel keep track and so manage the CPU/GPU
caches. As we track writes on the individual i915_vma, we should also be
sure to mark them as dirty.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119112515.2766748-1-chris@chris-wilson.co.uk
In order to avoid some nasty mutex inversions, commit 09c5ab384f
("drm/i915: Keep rings pinned while the context is active") allowed the
intel_ring unpinning to be run concurrently with the next context
pinning it. Thus each step in intel_ring_unpin() needed to be atomic and
ordered in a nice onion with intel_ring_pin() so that the lifetimes
overlapped and were always safe.
Sadly, a few steps in intel_ring_unpin() were overlooked, such as
closing the read/write pointers of the ring and discarding the
intel_ring.vaddr, as these steps were not serialised with
intel_ring_pin() and so could leave the ring in disarray.
Fixes: 09c5ab384f ("drm/i915: Keep rings pinned while the context is active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118230254.2615942-6-chris@chris-wilson.co.uk
Meson A1 SoC share the same register layout of pinmux with previous
Meson-G12A, however there is difference for gpio and pin config register
in A1. The main difference is that registers before A1 are grouped by
function while those of A1 are by bank. The new register layout is as
below:
/* first bank */ /* addr */
- P_PADCTRL_GPIOP_I base + 0x00 << 2
- P_PADCTRL_GPIOP_O base + 0x01 << 2
- P_PADCTRL_GPIOP_OEN base + 0x02 << 2
- P_PADCTRL_GPIOP_PULL_EN base + 0x03 << 2
- P_PADCTRL_GPIOP_PULL_UP base + 0x04 << 2
- P_PADCTRL_GPIOP_DS base + 0x05 << 2
/* second bank */
- P_PADCTRL_GPIOB_I base + 0x10 << 2
- P_PADCTRL_GPIOB_O base + 0x11 << 2
- P_PADCTRL_GPIOB_OEN base + 0x12 << 2
- P_PADCTRL_GPIOB_PULL_EN base + 0x13 << 2
- P_PADCTRL_GPIOB_PULL_UP base + 0x14 << 2
- P_PADCTRL_GPIOB_DS base + 0x15 << 2
Each bank contains at least 6 registers to be configured, if one bank
has more than 16 gpios, an extra P_PADCTRL_GPIO[X]_DS_EXT is included.
Between two adjacent P_PADCTRL_GPIO[X]_I, there is an offset 0x10, that
is to say, for third bank, the offsets will be 0x20,0x21,0x22,0x23,0x24
,0x25 according to above register layout. For previous chips, registers
are grouped according to their functions while registers of A1 are
according to bank.Also note that there is no AO bank any more in A1.
Current Meson pinctrl driver can cover such change by using base address
of GPIO as that of drive-strength. While simply giving reg_ds = reg_pullen
make wrong value to reg_ds for Socs that do not support drive-strength
like AXG.To make things simple, add an extra dt parser function for
a1 and remain the old dt parser function for only reg parsing.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Link: https://lore.kernel.org/r/1573819429-6937-3-git-send-email-qianggui.song@amlogic.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In meson_pinctrl_parse_dt, it contains two parts: reg parsing and
SoC relative fixup for AO. Several fixups in the same code make it hard
to maintain, so move all fixups to each SoC's callback and make
meson_pinctrl_parse_dt just do the reg parsing, separate these two
parts.Overview of all current Meson SoCs fixup is as below:
+------+--------------------------------------+--------------------------+
| | | |
| SoC | EE domain | AO domain |
+------+--------------------------------------+--------------------------+
|m8 | parse regs: | parse regs: |
|m8b | gpio,mux,pull,pull-enable(skip ds) | gpio,mux,pull(skip ds)|
|gxl | fixup: | fixup: |
|gxbb | no | pull-enable = pull; |
|axg | | |
+------+--------------------------------------+--------------------------+
|g12a | parse regs: | parse regs: |
|sm1 | gpio,mux,pull,pull-enable,ds | gpio,mux,ds |
| | fixup: | fixup: |
| | no | pull = gpio; |
| | | pull-enable = gpio; |
+------+--------------------------------------+--------------------------+
|a1 or | parse regs: |
|later | gpio/mux (without ao domain) |
|SoCs | fixup: |
| | pull = gpio; pull-enable = gpio; ds = gpio; |
+------+-----------------------------------------------------------------+
Since m8-axg share the same ao fixup, make a common function
meson8_aobus_parse_dt_extra to do the job.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Link: https://lore.kernel.org/r/1573819429-6937-2-git-send-email-qianggui.song@amlogic.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some devices do not make use of the CMD0/DAT0/DAT2 direction control
pins of the MMC/SD card 0 interface. In this case we should leave
those pins unconfigured.
A similar case already exists for "mc1_a_1" vs "mc1_a_2"
when the MC1_FBCLK pin is not used.
Add a new "mc0_a_2" pin group which is equal to "mc0_a_1" except
with the MC0_CMDDIR, MC0_DAT0DIR and MC0_DAT2DIR pins removed.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191117205439.239211-1-stephan@gerhold.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After the recent cleanup, the functionalities provided by the previous
kfd_kernel_queue_*.c are actually all packet manager related. So rename
them to reflect that.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ops_asic_specific function pointers are actually quite generic after
using a simple if condition. Eliminate it by code refactoring.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The only difference that CIK kernel queue functions are different from
VI is avoid allocating eop_mem. We can achieve that by using a if
condition.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The udl driver can use the generic fbdev implementation. Convert it.
v5:
* initialize console after registering device
v4:
* hardcode console bpp to 16
v3:
* remove module parameter fb_bpp in favor of fbdev's video
* call drm_fbdev_generic_setup() directly; remove udl_fbdev_init()
* use default for struct drm_mode_config_funcs.output_poll_changed
* use default for struct drm_driver.lastclose
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-2-tzimmermann@suse.de
x86/insn:
Adrian Hunter:
- Add some more Intel instructions to the opcode map:
cldemote, encls, enclu, enclv, enqcmd, enqcmds, movdir64b,
movdiri, pconfig, tpause, umonitor, umwait, wbnoinvd.
- The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
$ perf test -v "new " 2>&1 | grep -i cldemote
Decoded ok: 0f 1c 00 cldemote (%eax)
Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
Decoded ok: 0f 1c 00 cldemote (%rax)
Decoded ok: 41 0f 1c 00 cldemote (%r8)
Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
$ perf test -v "new " 2>&1 | grep -i tpause
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 41 0f ae f0 tpause %r8d
callchains:
Adrian Hunter:
- Fix segfault in thread__resolve_callchain_sample().
perf probe:
- Line fixes to show only lines where probes can be used with 'perf probe -L',
and when reporting them via 'perf probe -l'.
- Support multiprobe events.
perf scripts python:
Adrian Hunter:
- Fix use of TRUE with SQLite < 3.23 in exported-sql-viewer.py.
perf maps:
- Trim 'struct map' by removing the rb_node member for sorting
by map name, as that is only needed for processing kernel maps,
and only when classifying symbols by section at load time.
Sort them by name using qsort() and do lookups using bsearch()
when map_groups__find_by_name() is used.
perf parse:
Ian Rogers:
- Report initial event parsing error, providing a less cryptic message
to state that a PMU wasn't found in the system.
perf vendor events:
James Clark:
- Fix commas so that PMU event files for arm64, power8 and power nine
become valid JSON.
libtraceevent:
Konstantin Khlebnikov:
- Fix parsing of event %o and %X argument types.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXdPSQwAKCRCyPKLppCJ+
J1FQAQD4pSumHTHczHm9xoYuOxFAoNlT7VaML6YXJb82+pvcCwD9FuVBmWUcBoa6
/Bmn3Iy4j37aZhQCDLdByaaKVF8n9g0=
=ST42
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.5-20191119' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
x86/insn:
Adrian Hunter:
- Add some more Intel instructions to the opcode map:
cldemote, encls, enclu, enclv, enqcmd, enqcmds, movdir64b,
movdiri, pconfig, tpause, umonitor, umwait, wbnoinvd.
- The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
$ perf test -v "new " 2>&1 | grep -i cldemote
Decoded ok: 0f 1c 00 cldemote (%eax)
Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
Decoded ok: 0f 1c 00 cldemote (%rax)
Decoded ok: 41 0f 1c 00 cldemote (%r8)
Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
$ perf test -v "new " 2>&1 | grep -i tpause
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 41 0f ae f0 tpause %r8d
callchains:
Adrian Hunter:
- Fix segfault in thread__resolve_callchain_sample().
perf probe:
- Line fixes to show only lines where probes can be used with 'perf probe -L',
and when reporting them via 'perf probe -l'.
- Support multiprobe events.
perf scripts python:
Adrian Hunter:
- Fix use of TRUE with SQLite < 3.23 in exported-sql-viewer.py.
perf maps:
- Trim 'struct map' by removing the rb_node member for sorting
by map name, as that is only needed for processing kernel maps,
and only when classifying symbols by section at load time.
Sort them by name using qsort() and do lookups using bsearch()
when map_groups__find_by_name() is used.
perf parse:
Ian Rogers:
- Report initial event parsing error, providing a less cryptic message
to state that a PMU wasn't found in the system.
perf vendor events:
James Clark:
- Fix commas so that PMU event files for arm64, power8 and power nine
become valid JSON.
libtraceevent:
Konstantin Khlebnikov:
- Fix parsing of event %o and %X argument types.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds DP-MST support for GK104+ NVIDIA codecs.
GK104+ NVIDIA codecs support DP-MST audio. These codecs have 4
output converters and 4 pin widgets, with 4 device entries per pin
widget for a total of 16 device entries.
This patch moves the existing patch_nvhdmi() definition to
patch_nvhdmi_legacy(), used by pre-GK104 NVIDIA codecs. Redefine
patch_nvhdmi() to enable DP-MST support by setting codec->dp_mst and
spec->dyn_pcm_assign.
Introduce fresh logic for dynamic pcm assignment, making
sure that new pcm assignments are compatible with the legacy static
per_pin-pmc assignment that existed in the days before DP-MST.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-5-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch make it possible for non-acomp codecs to set
dyn_pcm_assign/dp_mst and get DP-MST audio support.
Document change notification HDA040-A for the Intel High Definition
Audio 1.0a specification introduces a Device Select verb for Digital
Display Pin Widgets that are multi-stream capable. This verb selects
a Device Entry that is used by subsequent Pin Widget verbs.
Once the Device Entry is selected, all subsequent Pin Widget verbs
controlling the sink device will be directed to the selected Device
Entry until the Device Select verb is updated with a new value.
These Pin Widget verbs include:
* Connection Select
* Get Connection List Entry
* Amplifier Gain/Mute
* Power State
* Pin Widget Control
* ELD Data
* DIP-Size
* DIP-Index
* DIP-Data
* DIP-XmitCtrl
* Content Protection Control
* ASP Channel Mapping
This patch adds calls to snd_hda_set_dev_select() to direct each of
these Pin Widget control verbs to the correct Device Entry.
snd_hda_get_connections() does not return per-device connection
list, therefore make use snd_hda_get_raw_connections() instead of
snd_hda_get_connections().
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-4-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds DP-MST jack support which will be used on NVIDIA
platforms. Today, DP-MST audio is supported only if the codec has
acomp support. This patch makes it possible to add DP-MST support
for non-acomp codecs.
For the codecs supporting DP-MST audio, each pin can contain several
device entries. Each device entry is a virtual pin, described by
pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug
event handling, non-acomp codecs enable and register jack-detection
for every hdmi_spec_per_pin.
This patch updates every relevant function in hda_jack.h and its
implementation in hda_jack.c, to consider dev_id along with pin_nid.
Changes to the HD Audio specification to support DP-MST audio are
described in the Intel Document Change Notification (DCN) number
HDA040-A.
From HDA040-A, "For the case of multi stream capable Digital Display
Pin Widget, [the Get Pin Sense verb] can be used to read a specific
Device Entry state as reported in Get Device List Entry verb." This
patch updates the read_pin_sense() function to take the dev_id as an
argument and pass it as a parameter to the Get Pin Sense verb.
Bits 15 through 20 from the Unsolicited Response for intrinsic
events contain the index of the Device Entry that generated the
event. This patch updates the Unsolicited Response event handlers to
extract the device entry index from the response and pass it to
snd_hda_jack_tbl_get_from_tag().
This patch updates snd_hda_jack_tbl_new() to take a dev_id argument
and store it in the jack structure, and to make sure not to generate
a different tag when called more than once for the same nid.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
s/snd_hda_pin_sense/snd_hda_jack_pin_sense/g
This aligns the snd_hda_pin_sense function name with the names of
other functions in hda_jack.h.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-2-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When we hot unplug a virtserialport and then try to hot plug again,
it fails:
(qemu) chardev-add socket,id=serial0,path=/tmp/serial0,server,nowait
(qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\
chardev=serial0,id=serial0,name=serial0
(qemu) device_del serial0
(qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\
chardev=serial0,id=serial0,name=serial0
kernel error:
virtio-ports vport2p2: Error allocating inbufs
qemu error:
virtio-serial-bus: Guest failure in adding port 2 for device \
virtio-serial0.0
This happens because buffers for the in_vq are allocated when the port is
added but are not released when the port is unplugged.
They are only released when virtconsole is removed (see a7a69ec0d8)
To avoid the problem and to be symmetric, we could allocate all the buffers
in init_vqs() as they are released in remove_vqs(), but it sounds like
a waste of memory.
Rather than that, this patch changes add_port() logic to ignore ENOSPC
error in fill_queue(), which means queue has already been filled.
Fixes: a7a69ec0d8 ("virtio_console: free buffers after reset")
Cc: mst@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 780bc7903a ("virtio_ring: Support DMA APIs") makes
virtqueue_add() return -EIO when we fail to map our I/O buffers. This is
a very realistic scenario for guests with encrypted memory, as swiotlb
may run out of space, depending on it's size and the I/O load.
The virtio-blk driver interprets -EIO form virtqueue_add() as an IO
error, despite the fact that swiotlb full is in absence of bugs a
recoverable condition.
Let us change the return code to -ENOMEM, and make the block layer
recover form these failures when virtio-blk encounters the condition
described above.
Cc: stable@vger.kernel.org
Fixes: 780bc7903a ("virtio_ring: Support DMA APIs")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Only serialise with the chipset using an mmio if the chipset is
currently active. We expect that any writes into the chipset range will
simply be forgotten until it wakes up.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118184943.2593048-8-chris@chris-wilson.co.uk
Commit 99e98d3fb1 ("cpuidle: Consolidate disabled state checks")
overlooked the fact that the imx6q and tegra20 cpuidle drivers use
the "disabled" field in struct cpuidle_state for quirks which trigger
after the initialization of cpuidle, so reading the initial value of
that field is not sufficient for those drivers.
In order to allow them to implement the quirks without using the
"disabled" field in struct cpuidle_state, introduce a new helper
function and modify them to use it.
Fixes: 99e98d3fb1 ("cpuidle: Consolidate disabled state checks")
Reported-by: Len Brown <lenb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The commit 0f27cff859 ("ACPI: sysfs: Make ACPI GPE mask kernel
parameter cover all GPEs") says:
"Use a bitmap of size 0xFF instead of a u64 for the GPE mask so 256
GPEs can be masked"
But the masking of GPE 0xFF it not supported and the check condition
"gpe > ACPI_MASKABLE_GPE_MAX" is not valid because the type of gpe is
u8.
So modify the macro ACPI_MASKABLE_GPE_MAX to 0x100, and drop the "gpe >
ACPI_MASKABLE_GPE_MAX" check. In addition, update the docs "Format" for
acpi_mask_gpe parameter.
Fixes: 0f27cff859 ("ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEs")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
[ rjw: Use u16 as gpe data type in acpi_gpe_apply_masked_gpes() ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On mpc83xx with a QE, IMMR is 2Mbytes and aligned on 2Mbytes boundarie.
On mpc83xx without a QE, IMMR is 1Mbyte and 1Mbyte aligned.
Each driver will map a part of it to access the registers it needs.
Some drivers will map the same part of IMMR as other drivers.
In order to reduce TLB misses, map the full IMMR with a BAT. If it is
2Mbytes aligned, map 2Mbytes. If there is no QE, the upper part will
remain unused, but it doesn't harm as it is mapped as guarded memory.
When the IMMR is not aligned on a 2Mbytes boundarie, only map 1Mbyte.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/269a00951328fb6fa1be2fa3cbc76c19745019b7.1568665466.git.christophe.leroy@c-s.fr
Modify back __set_fixmap() to using __fix_to_virt() instead
of fix_to_virt() otherwise the following happens because it
seems GCC doesn't see idx as a builtin const.
CC mm/early_ioremap.o
In file included from ./include/linux/kernel.h:11:0,
from mm/early_ioremap.c:11:
In function ‘fix_to_virt’,
inlined from ‘__set_fixmap’ at ./arch/powerpc/include/asm/fixmap.h:87:2,
inlined from ‘__early_ioremap’ at mm/early_ioremap.c:156:4:
./include/linux/compiler.h:350:38: error: call to ‘__compiletime_assert_32’ declared with attribute error: BUILD_BUG_ON failed: idx >= __end_of_fixed_addresses
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
^
./include/linux/compiler.h:331:4: note: in definition of macro ‘__compiletime_assert’
prefix ## suffix(); \
^
./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
^
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^
./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
^
./include/asm-generic/fixmap.h:32:2: note: in expansion of macro ‘BUILD_BUG_ON’
BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
^
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4cfac2f9c7 ("powerpc/mm: Simplify __set_fixmap()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f4984c615f90caa3277775a68849afeea846850d.1568295907.git.christophe.leroy@c-s.fr
Since commit f86ef74ed9 ("powerpc/8xx: Fix vaddr for IMMR early
remap"), the IMMR area has been mapped at startup with fixmap.
Use that fixmap directly instead of calling ioremap(), this
avoids calling ioremap() early before the slab is available.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f816ccdbd15b97cf43c5a8c7cc8dfa8db58ff036.1568294935.git.christophe.leroy@c-s.fr
We used to take a lock in amp_physical_cfm() but then we moved it to
the caller function. Unfortunately the unlock on this error path was
overlooked so it leads to a double unlock.
Fixes: a514b17fab ("Bluetooth: Refactor locking in amp_physical_cfm")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
komeda/komeda_event.c: In function ‘komeda_sprintf’:
komeda/komeda_event.c:31:2: warning: function ‘komeda_sprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
num = vsnprintf(str->str + str->len, free_sz, fmt, args);
v2: Update the comment msg.
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114100421.30510-1-james.qian.wang@arm.com
Add the device ID for the WiFi/BT/FM combo chip BCM4334 (rev B0).
The chip seems to use 43:34:b0:00:00:00 as default address,
so add it to the list of default addresses and leave it up
to the user to configure a valid one.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The bspec was recently updated with new cdclk -> voltage level tables to
accommodate the new 324/326.4 cdclk values.
Bspec: 21809
Fixes: 63c9dae71d ("drm/i915/ehl: Add voltage level requirement table")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118164412.26216-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
If the rproc driver is probed before the mailbox driver and if the rproc
Device Tree node has some mailbox properties, the rproc driver probe
shall be deferred instead of being probed without mailbox support.
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Link: https://lore.kernel.org/r/1573812188-19842-1-git-send-email-fabien.dessenne@st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Some firmware images contain a comma, such as:
EXTRA_FIRMWARE "brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt"
as Broadcom firmware simply tags the device tree compatible
string at the end of the firmware parameter file. And the
compatible string contains a comma.
This doesn't play well with gas:
drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S: Assembler messages:
drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S:4: Error: bad instruction `_fw_brcm_brcmfmac4334_sdio_samsung,gt_s7710_txt_bin:'
drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S:9: Error: bad instruction `_fw_brcm_brcmfmac4334_sdio_samsung,gt_s7710_txt_name:'
drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S:15: Error: can't resolve `.rodata' {.rodata section} - `_fw_brcm_brcmfmac4334_sdio_samsung' {*UND* section}
make[6]: *** [../scripts/Makefile.build:357: drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.o] Error 1
We need to get rid of the comma from the labels used by the
assembly stub generator.
Replacing a comma using GNU Make subst requires a helper
variable.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191115225911.3260-1-linus.walleij@linaro.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ufshcd_print_host_regs() can be called by interrupt handler, but it may
sleep due to ufshcd_dump_regs() allocates the dump buffer memory with flag
GFP_KERNEL. Fix it by changing GFP_KERNEL to GFP_ATMOIC.
Link: https://lore.kernel.org/r/1573798172-20534-5-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix up possible unclocked register access to auto hibern8 register in
resume path and through sysfs entry. Meanwhile, enable auto hibern8 only
after device is fully initialized in probe path.
Link: https://lore.kernel.org/r/1573798172-20534-4-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
