Commit graph

5,712 commits

Author SHA1 Message Date
Michal Pecio
d20405dcdf usb: xhci: Remove skip_isoc_td()
This function is pointless because usb_submit_urb() initializes all
isoc frame descriptors to -EXDEV and 0 length so that HCDs don't need
to do anything with transfers which were never executed.

Other HCDs rely on this (e.g. EHCI itd_complete()), so we can too.
This gets rid of a potentially dangereous function which could corrupt
memory if we weren't super careful to only call it on isoc URBs.

Also, set status to 0 rather than any random status determined by the
later TD which caused skipping. This status will be ignored anyway.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-03 19:23:28 +02:00
Michal Pecio
f232db53c2 usb: xhci: Simplify xhci_quiesce()
The function reads USBCMD, clears some bits and writes it back.
Its treatment of the Run bit is weird: the bit is usually written
as 0, as we would expect, but it may also be written as 1 if both
its current value and USBSTS.HCHalted are observed as 1.

Per xHCI 5.4.2, HCHalted is 0 whenever Run is 1, so the above can
only happen due to buggy HW or SW, e.g. concurrent xhci_quiesce()
and xhci_start() execution.

It's unclear why we should treat such cases specially and write
the bit as 1. The logic comes from original PoC implementation
and has never been explained. Just write 0 every time, which
looks like the safer choice when the intent is to stop the xHC.

We could get in trouble if clearing Run causes some very broken
xHC to start running after it was halted, but no such case has
been documented. It seems the logic was just poorly thought out.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-03 19:23:28 +02:00
Niklas Neronin
7ee6459630 usb: xhci: remove legacy 'num_trbs_free' tracking
Keeping track of free TRBs in a ring by adding and subtracting each time
a enqueue or dequeue pointer is modified has proven to be buggy and
complicated, especially over long periods of time.
The xhci driver has already moved to calculating free TRBs dynamically
based on ring size and the enqueue/dequeue positions.

The DbC path is the last user of 'num_trbs_free'. Rather than maintaining
two separate accounting mechanisms, remove the field entirely and switch
DbC to use xhci_num_trbs_free(). Since 'num_trbs_free' undercounts by one,
and xhci_num_trbs_free() does not, the check for sufficient free TRBs is
adjusted.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-03 19:23:28 +02:00
Stepan Ionichev
a592b28bc8 usb: xhci: fix typo in xhci_set_port_power() comment
Fix a spelling mistake (re-aquire -> re-acquire) in the function
header comment.

No functional change.

Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-03 19:23:28 +02:00
Greg Kroah-Hartman
55311a92bc Linux 7.1-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
 SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
 DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
 GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
 BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
 YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
 FLN2Zx4=
 =ufVr
 -----END PGP SIGNATURE-----

Merge tag 'v7.1-rc6' into usb-next

We need the USB and Thunderbolt fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-06-01 17:39:51 +02:00
Christian Marangi
ffeaf31f05 usb: host: add ARCH_AIROHA in XHCI MTK dependency
Airoha SoC use the same register map and logic of the Mediatek xHCI
driver, hence add it to the dependency list to permit compilation also
on this ARCH.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20260519164903.31258-1-ansuelsmth@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 11:35:47 +02:00
Seungjin Bae
11b5c101e2 usb: host: max3421: Reject hub port requests for non-existent ports
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. The `GetPortStatus` case correctly rejects
requests with `index != 1`, since the virtual root hub has only a
single port. However, the `ClearPortFeature` and `SetPortFeature`
cases lack the same check.

Fix this by extending the `index != 1` rejection to both cases,
matching the existing behavior of `GetPortStatus`.

Fixes: 2d53139f31 ("Add support for using a MAX3421E chip as a host driver.")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://patch.msgid.link/20260518224901.1887013-3-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 11:35:18 +02:00
Seungjin Bae
cff06b03b5 usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control()
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. In the `default` branches of both the
`ClearPortFeature` and `SetPortFeature` switch statements, it modifies
`max3421_hcd->port_status` by left shifting 1 by the request's `value`
parameter. However, it does not validate whether this shift will exceed
the width of `port_status`.

So if a malicious userspace task with access to the root hub via
/dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue`
greater than or equal to 32, the left shift operation invokes
shift-out-of-bounds undefined behavior. This results in arbitrary
bit corruption of `port_status`, including the normally-immutable
change bits, which can bypass internal state checks and confuse the
hub status.

Fix this by rejecting requests whose `value` exceeds the shift width
before performing the shift.

This issue was found using a KLEE-based symbolic execution tool for
kernel drivers that I'm currently developing.

Fixes: 2d53139f31 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://patch.msgid.link/20260518224901.1887013-1-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 11:35:18 +02:00
Wei-Cheng Chen
5a4c828b8b xhci: tegra: Fix ghost USB device on dual-role port unplug
When a USB device is unplugged from the dual-role port, the device-mode
path in tegra_xhci_id_work() explicitly clears both SS and HS port power
via direct hub_control ClearPortFeature(POWER) calls. This preempts the
xHCI controller's normal disconnect processing -- PORT_CSC is never
generated, the USB core never sees the disconnect, and the device remains
in its internal tree as a ghost visible in lsusb.

Add an otg_set_port_power flag to control whether the dual-role switch
path performs explicit port power management. SoCs that need it
(Tegra124 / Tegra210 / Tegra186) set the flag; later SoCs (Tegra194 and
beyond) rely on the PHY mode change to handle disconnect naturally and
skip all port power calls.

Within the port power path, otg_reset_sspi additionally gates the SSPI
reset sequence on host-mode entry for SoCs that require it.

Flags set per SoC:
  Tegra124, Tegra186  -> otg_set_port_power
  Tegra210            -> otg_set_port_power, otg_reset_sspi
  Tegra194 and later  -> (none)

Fixes: f836e78430 ("usb: xhci-tegra: Add OTG support")
Cc: stable <stable@kernel.org>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Link: https://patch.msgid.link/20260505112630.217704-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 10:35:50 +02:00
Jihong Min
9e896b4a48 usb: xhci-pci: add AMD Promontory 21 PCI glue
AMD Promontory 21 (PROM21) xHCI PCI functions use the common xhci-pci
core for USB operation, but also expose controller-specific sensor data.
Add a small PROM21 PCI glue driver for AMD 1022:43fc and 1022:43fd
controllers.

The glue delegates USB host operation to the common xhci-pci core and
publishes a "hwmon" auxiliary device with parent-provided MMIO data.
Auxiliary device creation failure is logged but does not fail the xHCI
probe.

Make the PROM21 glue a hidden Kconfig tristate driven by the user-visible
SENSORS_PROM21_XHCI option. If sensor support is disabled, generic
xhci-pci binds PROM21 controllers normally. If sensor support is enabled,
the glue follows USB_XHCI_PCI.

This keeps the auxiliary device available for a modular sensor driver while
avoiding a built-in xhci-pci core handing PROM21 controllers to a glue
driver that is only available as a module during initramfs.

Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-2-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:48:40 +02:00
Hans Zhang
bcb5da7a9f usb: xhci-mtk: Use FIELD_MODIFY()
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.

Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-6-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:43:04 +02:00
Hans Zhang
ac66a00ed2 usb: xhci: Use FIELD_MODIFY()
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.

Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-5-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:43:04 +02:00
Qinghua Zhao
e7d219f430 drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
Fix typo in comment where 'seperate' should be 'separate'.

Signed-off-by: Qinghua Zhao <zqh1630@126.com>
Link: https://patch.msgid.link/20260409145428.18130-1-zqh1630@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-11 12:02:11 +02:00
Greg Kroah-Hartman
3723393cc2 Linux 7.0-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnS4Y8eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGe6AIAI4rjLLPlxUKQbx4
 JP9lsKH7vqeIVvuMqzFau7+B8ngJ+80OESnBF7n43oNEqdJ0NYiL+rPtcGgBjZDP
 yUu5DlzVSxpAIQBZe2Nc0dz/5NbT9QxKyC5Yl/whpNIR7UHx1RFvDJYxwN9xKxTw
 ggLQevKAnHrKjIOKjq70Yqz2T1JMXc9Wp/xpur0oGioiFW/lH24CgHDXjE2Ka9oD
 wqhotzThuSaaVDmqZ8WNFKxx2onR4r8/NpljaVT2mWRJ2+IMF4pMOBJZRQiNZtRa
 1CsoJ3aV6pslAsuC1dLboCMul48VUgyu7l3xQwXVuA5bRO1jqt5ILWC10g09OItU
 7CxGTno=
 =1TRg
 -----END PGP SIGNATURE-----

Merge tag 'v7.0-rc7' into usb-next

We need the USB fixes in here to build on and for testing

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-06 09:06:39 +02:00
Michal Pecio
25e531b422 usb: xhci: Make usb_host_endpoint.hcpriv survive endpoint_disable()
xHCI hardware maintains its endpoint state between add_endpoint()
and drop_endpoint() calls followed by successful check_bandwidth().
So does the driver.

Core may call endpoint_disable() during xHCI endpoint life, so don't
clear host_ep->hcpriv then, because this breaks endpoint_reset().

If a driver calls usb_set_interface(), submits URBs which make host
sequence state non-zero and calls usb_clear_halt(), the device clears
its sequence state but xhci_endpoint_reset() bails out. The next URB
malfunctions: USB2 loses one packet, USB3 gets Transaction Error or
may not complete at all on some (buggy?) HCs from ASMedia and AMD.
This is triggered by uvcvideo on bulk video devices.

The code was copied from ehci_endpoint_disable() but it isn't needed
here - hcpriv should only be NULL on emulated root hub endpoints.
It might prevent resetting and inadvertently enabling a disabled and
dropped endpoint, but core shouldn't try to reset dropped endpoints.

Document xhci requirements regarding hcpriv. They are currently met.

Fixes: 18b74067ac ("xhci: Fix use-after-free regression in xhci clear hub TT implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-26-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
dad6711b9e usb: xhci: remove duplicate '0x' prefix
Prefix "0x" is automatically added by '%pad'.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-25-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
9a7ad750a8 usb: xhci: move roothub port limit validation
Function xhci_setup_port_arrays() limits the number of roothub ports
for both USB 2 and 3, this causes code repetition.

Solve this by moving roothub port limits validation to
xhci_create_rhub_port_array().

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-24-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
d81a558084 usb: xhci: simpilfy resume root hub code
Resume roothubs without checking 'retval' value, as it is always '0'.
Due to changes made in commit 79989bd4ab ("xhci: always resume roothubs
if xHC was reset during resume") the check is redundant.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-23-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
5dfc7f985f usb: xhci: cleanup xhci_hub_report_usb3_link_state()
Improve readability of xhci_hub_report_usb3_link_state().

Comments are shortened and clarified, and the code now makes it explicit
when the Port Link State (PLS) value is modified versus when other status
bits are updated.

No functional changes.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-22-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
aef5305da2 usb: xhci: rename parameter to match argument 'portsc'
A previous patch renamed the temporary variable holding the value read
from the PORTSC register from 'temp' to 'portsc'. This patch follows up
by updating the parameter names of all helper functions called from
xhci_hub_control() that receive a PORTSC value, as well as the functions
they call.

Function changed:
xhci_get_port_status()
 L xhci_get_usb3_port_status()
    L xhci_hub_report_usb3_link_state()
    L xhci_del_comp_mod_timer()
xhci_get_ext_port_status()
xhci_port_state_to_neutral()
xhci_clear_port_change_bit()
xhci_port_speed()

The reason for the rename is to differentiate between port
status/change bit to be written to PORTSC and replying to hub-class
USB requests. Each of them use their specific macros.

Use "portsc" name for PORTSC values and "status" for values intended
for replying to hub-class USB request.

A dedicated structure for USB hub port status responses
('struct usb_port_status' from ch11.h) exists and will be integrated in
a later patch.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-21-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
58a5bfc4aa usb: xhci: add PORTSC variable to xhci_hub_control()
The variable 'temp' is used multiple times throughout xhci_hub_control()
for holding only PORTSC register values.

As a follow-up to introducing a dedicated variable for PORTPMSC, rename
all remaining 'temp' to 'portsc'. This improves readability and clarifies
what is being modified.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-20-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
f84965acad usb: xhci: add PORTPMSC variable to xhci_hub_control()
The code handling U1/U2 timeout updates reads and modifies the PORTPMSC
register using the generic 'temp' variable, which is also used for
PORTSC. This makes the code hard to read and increases the risk of mixing
up register contents.

Introduce a dedicated 'portpmsc' variable for PORTPMSC accesses and use
it in both U1 and U2 timeout handlers. This makes the intent clearer and
keeps register operations logically separated.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
4515039a8a usb: xhci: separate use of USB Chapter 11 PLS macros from xHCI-specific PLS macros
The xhci driver uses two different sources for Port Link State (PLS):
  1. The PLS field in the PORTSC register (bits 8:5).
  2. The PLS value encoded in bits 15:8 of the USB request wIndex,
     received by xhci_hub_control().

While both represent similar link states, they differ in a few details,
for example, xHCI's Resume State. Because of these differences, the xhci
driver defines its own set of PLS macros in xhci-port.h, which are intended
to be used when reading and writing  PORTSC. The generic USB Chapter 11
macros in ch11.h should only be used when parsing or replying to hub-class
USB requests.

To avoid mixing these two representations and prevent incorrect state
reporting, replace all uses of Chapter 11 PLS macros with the xHCI
versions when interacting with the PORTSC register.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-18-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
995e2af165 usb: xhci: clean up 'wValue' handling in xhci_hub_control()
Several hub control requests encode a descriptor type in the upper byte
of 'wValue'. Clean this up by extracting the descriptor type into a local
variable and using it for all relevant requests.

Replace magic value (0x02) with the appropriate macro (HUB_EXT_PORT_STATUS)

This improves readability and makes the handling of 'wValue' consistent.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-17-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
b7a56f8652 usb: xhci: clean up handling of upper bits in SetPortFeature wIndex
In Set Port Feature requests, the upper byte of 'wIndex' encodes
feature-specific parameters. The current code reads these upper bits in
an early pre-processing block, and then the same feature is handled again
later in the main switch statement. This results in duplicated condition
checks and makes the control flow harder to follow.

Move all feature-specific extraction of 'wIndex' upper bits into the
main SetPortFeature logic so that each feature is handled in exactly one
place. This reduces duplication, makes the handling clearer, and keeps
'wIndex' parsing local to the code that actually uses the values.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:38 +02:00
Niklas Neronin
ec5521a771 usb: xhci: rename 'wIndex' parameters to 'portnum'
Several helper functions take a parameter named 'wIndex', but the
value they receive is not the raw USB request wIndex field. The only
function that actually processes the USB hub request parameter is
xhci_hub_control(), which extracts the relevant port number (and other
upper-byte fields) before passing them down.

To avoid confusion between the USB request parameter and the derived
0-based port index, rename all such function parameters from 'wIndex'
to 'portnum'. This improves readability and makes the call intentions
clearer.

When a function accept struct 'xhci_port' pointer, use its port number
instead.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:37 +02:00
Niklas Neronin
1e6138c065 usb: xhci: stop treating 'wIndex' as a mutable port number
The USB request parameter 'wIndex' is a 16-bit field whose meaning depends
on the request type. For hub port operations, only bits 7:0 encode the port
number (1..MaxPorts). Despite this, the current code extracts the port
number into 'portnum1' while also modifying and using 'wIndex' directly as
a 0-based port index. This dual use is both confusing and error-prone,
since 'wIndex' is not always a pure port number.

Clean this up by deriving a single 0-based 'portnum' from 'wIndex' and
using it throughout the function. The original 'wIndex' value is no longer
modified or treated as a port number. This also matches existing xhci code.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:37 +02:00
Niklas Neronin
2a70e5dc03 usb: xhci: optimize resuming from S4 (suspend-to-disk)
On resume from S4 (power loss after suspend/hibernation), the xHCI
driver previously freed, reallocated, and fully reinitialized all
data structures. Most of this is unnecessary because the data is
restored from a saved image; only the xHCI registers lose their values.

This patch optimizes S4 resume by performing only a host controller
reset, which includes:
* Freeing or clearing runtime-created data.
* Rewriting xHCI registers.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:37 +02:00
Niklas Neronin
951564d2ca usb: xhci: improve debug messages during suspend
Improve debug output for suspend failures, particularly when the controller
handshake does not complete. This will become important as upcoming patches
significantly rework the resume path, making more detailed suspend-side
messages valuable for debugging.

Add an explicit check of the Save/Restore Error (SRE) flag after a
successful Save State (CSS) operation. The xHCI specification
(note in section 4.23.2) states:

 "After a Save or Restore State operation completes, the
  Save/Restore Error (SRE) flag in USBSTS should be checked to
  ensure the operation completed successfully."

Currently, the SRE error is only observed and warning is printed.
This patch does not introduce deeper error handling, as the correct
response is unclear and changes to suspend behavior may risk regressions
once the resume path is updated.

Additionally, simplify and clean up the suspend USBSTS CSS/SSS
handling code, improving readability and quirk handling for AMD
SNPS xHC controllers that occasionally do not clear the SSS bit.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:37 +02:00
Niklas Neronin
b4dd01eb9b usb: xhci: split core allocation and initialization
Separate allocation and initialization in the xHCI core:
* xhci_mem_init() now only handles memory allocation.
* xhci_init() now only handles initialization.

This split allows xhci_init() to be reused when resuming from S4
suspend-to-disk.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:37 +02:00
Niklas Neronin
45484754a0 usb: xhci: move initialization for lifetime objects
Initialize objects that exist for the lifetime of the driver only once,
rather than repeatedly. These objects do not require re-initialization
after events such as S4 (suspend-to-disk).

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:37 +02:00
Niklas Neronin
e4573f4937 usb: xhci: move ring initialization
Move ring initialization from xhci_ring_alloc() to xhci_ring_init().
Call xhci_ring_init() after xhci_ring_alloc(); in the future,
it can also be used to re-initialize the ring during resume.

Additionally, remove xhci_dbg_trace() from xhci_mem_init(). The command
ring's first segment DMA address is now printed during the trace call in
xhci_ring_init().

This refactoring lays also the groundwork for eventually replacing:
* xhci_dbc_ring_init()
* xhci_clear_command_ring()

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:37 +02:00
Niklas Neronin
b1ebf19216 usb: xhci: move reserving command ring trb
Move the command ring TRB reservation from xhci_mem_init() to xhci_init().

Function xhci_mem_init() is intended for memory allocation,
while xhci_init() is for initialization.

This split allows xhci_init() to be reused when resuming from S4
suspend-to-disk.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:37 +02:00
Niklas Neronin
0837c87f95 usb: xhci: factor out roothub bandwidth cleanup
Introduce xhci_rh_bw_cleanup() to release all bandwidth tracking
structures associated with xHCI roothub ports.

The new helper clears:
 * TT bandwidth entries
 * Per-interval endpoint lists

This refactors and consolidates the existing per-port cleanup logic
previously embedded in xhci_mem_cleanup(), reducing duplication and
making the teardown sequence easier to follow.

The helper will also be reused for upcoming S4 resume handling.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:37 +02:00
Niklas Neronin
ab915ec99c usb: xhci: relocate Restore/Controller error check
A Restore Error or Host Controller Error indicates that the host controller
failed to resume after suspend. In such cases, the xhci driver is fully
re-initialized, similar to a post-hibernation scenario.

The existing error check is only relevant when 'power_lost' is false.
If 'power_lost' is true, a Restore or Controller error has no effect:
no warning is printed and the 'power_lost' state remains unchanged.

Move the entire error check into the if '!power_lost' condition
to make this dependency explicit and simplify the resume logic.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:37 +02:00
Niklas Neronin
5ef760cf1c usb: xhci: simplify CMRT initialization logic
The function compliance_mode_recovery_timer_init() is called from
xhci_init() because the Compliance Mode Recovery Timer (CMRT) must be set
up before xhci_run() when the xhci driver is re-initialized.

To handle this case, the boolean flag 'comp_timer_running' was introduced
to track whether xhci_run() had already been called, ensuring that
xhci_resume() would not invoke compliance_mode_recovery_timer_init()
a second time.

This can be simplified by moving the 'done' label in xhci_resume() to
after the compliance_mode_recovery_timer_init() call. With this change,
the timer initialization runs only when the xhci driver has not been
re-initialized, making the 'comp_timer_running' flag unnecessary and
allowing it to be removed.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:36 +02:00
Michal Pecio
452af0f9ff usb: xhci: Fix debugfs bandwidth reporting
Replace kernel USB speed numbers with xHCI protocol IDs expected by HW.
They are numerically equal up to high speed, but instead of SuperSpeed
we were querying SuperSpeed+.

Gen1 hardware rejects such commands with TRB Error, which resulted in
zero available bandwidth being shown.

While at that, report failures properly. No attempt made at "tunneling"
all possible comp codes through errno, debugfs users may inspect the
result through event-ring/trbs.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:36 +02:00
Michal Pecio
88a985cf95 usb: xhci: Simplify clearing the Event Interrupt bit
USBSTS is mostly RW1C, so to clear EINT we should write just this
one bit. Remove pointless code which ORs the bit with current value
of the register, even though the bit is already known to be set,
and writes the result back, which clears all active RW1C flags.

We used to inadvertently clear PCD and SRE in this way. PCD isn't
used by the driver and SRE is only used at resume, so clearing them
should make no difference. Don't clear them anymore.

Tested by connecting and mounting a storage device on a few HCs.

Before: xhci_irq USBSTS 0x00000018 EINT PCD -> 0x00000000
        xhci_irq USBSTS 0x00000008 EINT -> 0x00000000
After:  xhci_irq USBSTS 0x00000018 EINT PCD -> 0x00000010 PCD
        xhci_irq USBSTS 0x00000018 EINT PCD -> 0x00000010 PCD

Some flags are RsvdZ - should be written as zero regardless of the
value read, so technically it was a bug. But no problems are known.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:36 +02:00
Oliver Neukum
abe93f27cd xhci: use BIT macro
We have the macro. Use it.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 15:55:36 +02:00
Guan-Yu Lin
5abbe6ecc6 usb: host: xhci-sideband: delegate offload_usage tracking to class drivers
Remove usb_offload_get() and usb_offload_put() from the xHCI sideband
interrupter creation and removal paths.

The responsibility of manipulating offload_usage now lies entirely with
the USB class drivers. They have the precise context of when an offload
data stream actually starts and stops, ensuring a much more accurate
representation of offload activity for power management.

Cc: stable <stable@kernel.org>
Fixes: ef82a4803a ("xhci: sideband: add api to trace sideband usage")
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Tested-by: Hailong Liu <hailong.liu@oppo.com>
Tested-by: hailong.liu@oppo.com
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260401123238.3790062-3-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 09:43:30 +02:00
Guan-Yu Lin
bd3d245b0f usb: core: use dedicated spinlock for offload state
Replace the coarse USB device lock with a dedicated offload_lock
spinlock to reduce contention during offload operations. Use
offload_pm_locked to synchronize with PM transitions and replace
the legacy offload_at_suspend flag.

Optimize usb_offload_get/put by switching from auto-resume/suspend
to pm_runtime_get_if_active(). This ensures offload state is only
modified when the device is already active, avoiding unnecessary
power transitions.

Cc: stable <stable@kernel.org>
Fixes: ef82a4803a ("xhci: sideband: add api to trace sideband usage")
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Tested-by: Hailong Liu <hailong.liu@oppo.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260401123238.3790062-2-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-02 09:43:26 +02:00
Justin Chen
679b771ea0 usb: ehci-brcm: fix sleep during atomic
echi_brcm_wait_for_sof() gets called after disabling interrupts
in ehci_brcm_hub_control(). Use the atomic version of poll_timeout
to fix the warning.

Fixes: 9df231511b ("usb: ehci: Add new EHCI driver for Broadcom STB SoC's")
Cc: stable <stable@kernel.org>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260318185707.2588431-1-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-30 17:04:13 +02:00
Nicolas Chauvet
448f428a4b usb: tegra: use MODULE_FIRMWARE if SOC is ENABLED
This allows to reduce the size of the initramfs by only selecting
the related firmware when a given SOC is enabled.

Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Link: https://patch.msgid.link/20260323140249.173603-1-kwizart@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-30 16:47:51 +02:00
Rosen Penev
03cd4fd620 usb: fhci: use kzalloc_flex for priv struct
Convert kzalloc_obj(s) to kzalloc_flex to save an allocation.

Add __counted_by to get extra runtime analysis. Move counting variable
assignment immediately after allocation as required by __counted_by.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260313003456.124270-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-18 16:00:34 +01:00
Greg Kroah-Hartman
de6c925db9 Merge 7.0-rc4 into usb-next
We need the USB fixes in this branch as well to build on top of

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-16 11:50:48 +01:00
Mathias Nyman
ae4ff9dead xhci: Fix NULL pointer dereference when reading portli debugfs files
Michal reported and debgged a NULL pointer dereference bug in the
recently added portli debugfs files

Oops is caused when there are more port registers counted in
xhci->max_ports than ports reported by Supported Protocol capabilities.
This is possible if max_ports is more than maximum port number, or
if there are gaps between ports of different speeds the 'Supported
Protocol' capabilities.

In such cases port->rhub will be NULL so we can't reach xhci behind it.
Add an explicit NULL check for this case, and print portli in hex
without dereferencing port->rhub.

Reported-by: Michal Pecio <michal.pecio@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20260304103856.48b785fd.michal.pecio@gmail.com
Fixes: 384c57ec72 ("usb: xhci: Add debugfs support for xHCI Port Link Info (PORTLI) register.")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260304223639.3882398-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-11 16:18:48 +01:00
Dayu Jiang
d6d5febd12 usb: xhci: Prevent interrupt storm on host controller error (HCE)
The xHCI controller reports a Host Controller Error (HCE) in UAS Storage
Device plug/unplug scenarios on Android devices. HCE is checked in
xhci_irq() function and causes an interrupt storm (since the interrupt
isn’t cleared), leading to severe system-level faults.

When the xHC controller reports HCE in the interrupt handler, the driver
only logs a warning and assumes xHC activity will stop as stated in xHCI
specification. An interrupt storm does however continue on some hosts
even after HCE, and only ceases after manually disabling xHC interrupt
and stopping the controller by calling xhci_halt().

Add xhci_halt() to xhci_irq() function where STS_HCE status is checked,
mirroring the existing error handling pattern used for STS_FATAL errors.

This only fixes the interrupt storm. Proper HCE recovery requires resetting
and re-initializing the xHC.

CC: stable@vger.kernel.org
Signed-off-by: Dayu Jiang <jiangdayu@xiaomi.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260304223639.3882398-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-11 16:18:48 +01:00
Zilin Guan
c1c8550e70 usb: xhci: Fix memory leak in xhci_disable_slot()
xhci_alloc_command() allocates a command structure and, when the
second argument is true, also allocates a completion structure.
Currently, the error handling path in xhci_disable_slot() only frees
the command structure using kfree(), causing the completion structure
to leak.

Use xhci_free_command() instead of kfree(). xhci_free_command() correctly
frees both the command structure and the associated completion structure.
Since the command structure is allocated with zero-initialization,
command->in_ctx is NULL and will not be erroneously freed by
xhci_free_command().

This bug was found using an experimental static analysis tool we are
developing. The tool is based on the LLVM framework and is specifically
designed to detect memory management issues. It is currently under
active development and not yet publicly available, but we plan to
open-source it after our research is published.

The bug was originally detected on v6.13-rc1 using our static analysis
tool, and we have verified that the issue persists in the latest mainline
kernel.

We performed build testing on x86_64 with allyesconfig using GCC=11.4.0.
Since triggering these error paths in xhci_disable_slot() requires specific
hardware conditions or abnormal state, we were unable to construct a test
case to reliably trigger these specific error paths at runtime.

Fixes: 7faac1953e ("xhci: avoid race between disable slot command and host runtime suspend")
CC: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260304223639.3882398-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-11 16:18:48 +01:00
Gabor Juhos
bb24a1c09d usb: ehci-orion: remove optional PHY handling code remnants
Since the USB core code handles the generic USB PHYs automatically, the
optional PHY handling code has been removed from the 'ehci-orion' driver
entirely by commit e04585184d ("usb: ehci-orion: avoid double PHY
initialization"). However, the devm_phy_optional_get() call has been kept
so the driver still gets the PHY even though it is not used for anything
in the driver.

Drop the remaining code, and also remove the 'phy' member of the
'orion_ehci_hcd' structure to simplify the code.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260221-ehci-orion-drop-phy-handling-v2-1-5e26aa73790b@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-11 14:59:42 +01:00
Diogo Ivo
d0ef3c4a9f usb: xhci: tegra: Remove redundant mutex when setting phy mode
As the PHY subsystem already synchronizes concurrent accesses to a PHY
instance with a core-internal mutex remove the driver specific mutex
synchronization.

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://patch.msgid.link/20260127-diogo-tegra_phy-v2-2-787b9eed3ed5@tecnico.ulisboa.pt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-11 14:59:26 +01:00