CurrentWirelessMode in struct hal_data_8188e is not used. Remove the
component and the enum with its possible values.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211016113008.27549-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems that previous versions of this driver provided a procfs
interface for debugging.
Remove the procfs helper functions which are no longer used.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211016113008.27549-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove a bunch of unused structs, enums and defines
from Hal8188EPhyCfg.h.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211016113008.27549-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the PHY_SetRFPathSwitch_8188E function which is not used.
It was the only caller of phy_setrfpathswitch_8188e, that function
can be removed as well.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211016113008.27549-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove prototypes of functions that aren't present in this driver.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211016113008.27549-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit aefb1fc5c1 ("staging: r8188eu: odm BoardType is never set")
clarified that the odm board type is always 0.
The CheckCondition functions extract the board type from the hex
parameter and stores it in _board. For _board == 0,
(_board == cond) && cond != 0x00 is always false. Remove the checks.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211016113008.27549-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SupportInterface in struct odm_dm_struct is always ODM_ITRF_USB.
Remove the variable and the code to configure the interface.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211016113008.27549-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hal variable HW_VAR_TRIGGER_GPIO_0 and the rtl8192cu_trigger_gpio_0
function are not used. Remove them.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211016113008.27549-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove some unused constants and variables that are left over from
previous cleanup patches.
Suggested-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211017111705.18989-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hexadecimal addresses in device tree must be defined using lower case.
There are some of them that are still in upper case. Change them all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20211017070656.12654-2-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ODM_CmnInfoPtrArrayHook() there is only the case
ODM_CMNINFO_STA_STATUS and the function is called only with this value.
Remove ODM_CmnInfoPtrArrayHook() and fix the three places where it is
called.
Acked-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211015163507.9091-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pMacPhyMode is not used. Remove it from odm_dm_struct and remove
related dead code.
Acked-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211015163507.9091-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pBandType is never set, it stays at the default value 0. Remove it
from odm_dm_struct and remove related unneeded code.
Acked-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211015163507.9091-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function ODM_AntselStatistics_88C() is not used, remove it.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211015163507.9091-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function GetPSDData() is not used, remove it. It is the only user of
ConvertTo_dB() and ODM_StallExecution(), remove these two functions
and the now unused dB_Invert_Table as well.
Acked-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211015163507.9091-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function ODM_SingleDualAntennaDefaultSetting() is not used,
remove it.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211015163507.9091-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove empty functions from odm.c.
Acked-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211015163507.9091-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turn iov_iter_fault_in_readable into a function that returns the number
of bytes not faulted in, similar to copy_to_user, instead of returning a
non-zero value when any of the requested pages couldn't be faulted in.
This supports the existing users that require all pages to be faulted in
as well as new users that are happy if any pages can be faulted in.
Rename iov_iter_fault_in_readable to fault_in_iov_iter_readable to make
sure this change doesn't silently break things.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Turn fault_in_pages_{readable,writeable} into versions that return the
number of bytes not faulted in, similar to copy_to_user, instead of
returning a non-zero value when any of the requested pages couldn't be
faulted in. This supports the existing users that require all pages to
be faulted in as well as new users that are happy if any pages can be
faulted in.
Rename the functions to fault_in_{readable,writeable} to make sure
this change doesn't silently break things.
Neither of these functions is entirely trivial and it doesn't seem
useful to inline them, so move them to mm/gup.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Fix following coccicheck warning:
./drivers/hwmon/tmp421.c:416:1-23: WARNING: Function
for_each_child_of_node should have of_node_put() before return.
Early exits from for_each_child_of_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20211018121538.16482-1-wanjiabing@vivo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.
Replace pci_dev->driver with to_pci_driver(). This is a step toward
removing pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.
Replace pdev->driver with to_pci_driver(). This is a step toward removing
pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.
Replace pdev->driver with to_pci_driver(). This is a step toward removing
pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.
Replace pdev->driver with to_pci_driver(). This is a step toward removing
pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.
Replace pdev->driver with to_pci_driver(). This is a step toward removing
pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.
Replace pdev->driver with to_pci_driver(). This is a step toward removing
pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Save the struct pci_driver and struct pci_error_handlers pointers from
pdev->driver instead of chasing the pointers several times. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Everything except the first 32 bits was lost when the pause flags were
added. This makes the 50000baseCR2 mode flag (bit 34) not appear.
I have tested this with a 10G card (SFN5122F-R7) by modifying it to
return a non-legacy link mode (10000baseCR).
Signed-off-by: Erik Ekman <erik@kryo.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix delay settings applied to wrong cpu in parse_port_config. The delay
values is set to the wrong index as the cpu_port_index is incremented
too early. Start the cpu_port_index to -1 so the correct value is
applied to address also the case with invalid phy mode and not available
port.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS for net-next:
1) Add new run_estimation toggle to IPVS to stop the estimation_timer
logic, from Dust Li.
2) Relax superfluous dynset check on NFT_SET_TIMEOUT.
3) Add egress hook, from Lukas Wunner.
4) Nowadays, almost all hook functions in x_table land just call the hook
evaluation loop. Remove remaining hook wrappers from iptables and IPVS.
From Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alvin Šipraga says:
====================
net: dsa: add support for RTL8365MB-VC
This series adds support for Realtek's RTL8365MB-VC, a 4+1 port
10/100/1000M Ethernet switch. The driver - rtl8365mb - was developed by
Michael Ramussen and myself.
This version of the driver is relatively slim, implementing only the
standalone port functionality and no offload capabilities. It is based
on a previous RFC series [1] from August, and the main difference is the
removal of some spurious VLAN operations. Otherwise I have simply
addressed most of the feedback. Please see the respective patches for
more detail.
In parallel I am working on offloading the bridge layer capabilities,
but I would like to get the basic stuff upstreamed as soon as possible.
v3 -> v4:
- get irq before setting virq parents (fixes kernel test robot
warning)
- remove pad-to-72-bytes logic in tagger xmit (fixes DENG Qingfang's
suggestion); no longer needed as we set CPU minimum RX size to 64
bytes
- use mutex to protect MIB counter access instead of a spinlock (fixes
Jakub's feedback on v3 statistics refactoring)
v2 -> v3:
- move IRQ setup earlier in probe per Florian's suggestion
- fix compilation error on some archs due to FIELD_PREP use in v1
- follow Jakub's suggestion and use the standard ethtool stats API;
NOTE: new patch in the series for relevant DSA plumbing
- following the stats change, it became apparent that the rtl8366
helper library is no longer that helpful; scrap it and implement
the ethtool ops specifically for this chip
v1 -> v2:
- drop DSA port type checks during MAC configuration
- use OF properties to configure RGMII TX/RX delay
- don't set default fwd_offload_mark if packet is trapped to CPU
- remove port mapping macros
- update device tree bindings documentation with an example
- cosmetic changes to the tagging driver using FIELD_* macros
[1] https://lore.kernel.org/netdev/20210822193145.1312668-1-alvin@pqrs.dk/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The RTL8365MB-VC ethernet switch controller has 4 internal PHYs for its
user-facing ports. All that is needed is to let the PHY driver core
pick up the IRQ made available by the switch driver.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a realtek-smi subdriver for the RTL8365MB-VC 4+1 port
10/100/1000M switch controller. The driver has been developed based on a
GPL-licensed OS-agnostic Realtek vendor driver known as rtl8367c found
in the OpenWrt source tree.
Despite the name, the RTL8365MB-VC has an entirely different register
layout to the already-supported RTL8366RB ASIC. Notwithstanding this,
the structure of the rtl8365mb subdriver is loosely based on the rtl8366rb
subdriver. Like the 'rb, it establishes its own irqchip to handle
cascaded PHY link status interrupts.
The RTL8365MB-VC switch is capable of offloading a large number of
features from the software, but this patch introduces only the most
basic DSA driver functionality. The ports always function as standalone
ports, with bridging handled in software.
One more thing. Realtek's nomenclature for switches makes it hard to
know exactly what other ASICs might be supported by this driver. The
vendor driver goes by the name rtl8367c, but as far as I can tell, no
chip actually exists under this name. As such, the subdriver is named
rtl8365mb to emphasize the potentially limited support. But it is clear
from the vendor sources that a number of other more advanced switches
share a similar register layout, and further support should not be too
hard to add given access to the relevant hardware. With this in mind,
the subdriver has been written with as few assumptions about the
particular chip as is reasonable. But the RTL8365MB-VC is the only
hardware I have available, so some further work is surely needed.
Co-developed-by: Michael Rasmussen <mir@bang-olufsen.dk>
Signed-off-by: Michael Rasmussen <mir@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit implements a basic version of the 8 byte tag protocol used
in the Realtek RTL8365MB-VC unmanaged switch, which carries with it a
protocol version of 0x04.
The implementation itself only handles the parsing of the EtherType
value and Realtek protocol version, together with the source or
destination port fields. The rest is left unimplemented for now.
The tag format is described in a confidential document provided to my
company by Realtek Semiconductor Corp. Permission has been granted by
the vendor to publish this driver based on that material, together with
an extract from the document describing the tag format and its fields.
It is hoped that this will help future implementors who do not have
access to the material but who wish to extend the functionality of
drivers for chips which use this protocol.
In addition, two possible values of the REASON field are specified,
based on experiments on my end. Realtek does not specify what value this
field can take.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtl8365mb is a new realtek-smi subdriver for the RTL8365MB-VC 4+1 port
10/100/1000M Ethernet switch controller. Its compatible string is
"realtek,rtl8365mb".
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move things around a little so that this tag driver is alphabetically
ordered. The Kconfig file is sorted based on the tristate text.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub pointed out that we have a new ethtool API for reporting device
statistics in a standardized way, via .get_eth_{phy,mac,ctrl}_stats.
Add a small amount of plumbing to allow DSA drivers to take advantage of
this when exposing statistics.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
UAPI header should have no C++ style comment but only in the
traditional C style comment, but there is still one place we used it
mistakenly. This patch corrects it.
Fixes: 5422835666 ("ALSA: ctl: remove unused macro for timestamping of elem_value")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211018114035.18433-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UAPI headers are built with -std=c90 and C++ style comments are
explicitly prohibited. The recent commit overlooked the rule and
caused the error at header installation. This patch corrects those.
Fixes: bea36afa10 ("ALSA: firewire-motu: add message parser to gather meter information in register DSP model")
Fixes: 90b28f3bb8 ("ALSA: firewire-motu: add message parser for meter information in command DSP model")
Fixes: 634ec0b290 ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211018113812.0a16efb0@canb.auug.org.au
Link: https://lore.kernel.org/r/20211018063700.30834-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit f07c776f6d ("arm64: dts: mediatek: Move reset controller
constants into common location") moves the reset controller headers.
However, it forgot to rename the DT example in mt8192-afe-pcm.yaml.
Renames the DT example to pass dt_binding_check.
Fixes: f07c776f6d ("arm64: dts: mediatek: Move reset controller constants into common location")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211018101608.3818840-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During development of V5 of the i2s-tdm patch series, I replaced
the atomic refcount with a regular integer, as it was only ever
accessed within a spinlock.
Foolishly, I got the semantics of atomic_dec_and_test wrong, which
resulted in a test for 0 actually becoming a test for >0.
The result was that setting the audio frequency broke; switching
from 44100 Hz audio playback to 96000 Hz audio playback would
garble the sound most unpleasantly.
Fix this by checking for --refcount == 0, which is what it should
have been all along.
Fixes: 081068fd64 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211015210730.308946-1-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement driver_name to provide an alternative to card_name for userspace
configuration of Amlogic audio cards.
Suggested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211017160028.23318-1-christianshewitt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Up to now aic32x4_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211015071113.2795767-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Do nothing if format was zero at snd_soc_runtime_set_dai_fmt().
soc-core.c can be more simple code by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ee8jt7d3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
