The int3472-discrete driver can enter an error path after initialising
int3472->clock.ena_gpio, but before it has registered the clock. This will
cause a NULL pointer dereference, because clkdev_drop() is not null aware.
Instead of guarding the call to skl_int3472_unregister_clock() by checking
for .ena_gpio, check specifically for the presence of the clk_lookup, which
will guarantee clkdev_create() has already been called.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214453
Fixes: 7540599a5e ("platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()")
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20211008224608.415949-1-djrscally@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This change set feature enahancements for spcr3 transfer modes as well as
adds support for half-duplex 3-wire mode transfer.
Kamal Dasu (3):
spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode
spi: bcm-qspi: clear MSPI spifie interrupt during probe
spi: bcm-qspi: add support for 3-wire mode for half duplex transfer
drivers/spi/spi-bcm-qspi.c | 262 +++++++++++++++++++++++++++++--------
1 file changed, 208 insertions(+), 54 deletions(-)
--
2.17.1
The comment decribing the IPC timeout hadn't been updated when the
actual timeout was changed from 3 to 5 seconds in
commit a7d53dbbc7 ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") .
Since the value is anyway updated to 10s now, take this opportunity to
update the value in the comment too.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit a7d53dbbc7 ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") states that the recommended timeout range
is 5-10 seconds. Adjust the timeout value to the higher of those i.e 10
seconds, to account for situations where the 5 seconds is insufficient
for disconnect command success.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-3-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The macro IPC_TIMEOUT is already in jiffies (it is also used like that
elsewhere in the file when calling wait_for_completion_timeout()). Don’t
convert it using helper functions for the purposes of calculating the
busy loop expiry time.
Fixes: e7b7ab3847 (“platform/x86: intel_scu_ipc: Sleeping is fine when polling”)
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-2-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The comment decribing the IPC timeout hadn't been updated when the
actual timeout was changed from 3 to 5 seconds in
commit a7d53dbbc7 ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") .
Since the value is anyway updated to 10s now, take this opportunity to
update the value in the comment too.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit a7d53dbbc7 ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") states that the recommended timeout range
is 5-10 seconds. Adjust the timeout value to the higher of those i.e 10
seconds, to account for situations where the 5 seconds is insufficient
for disconnect command success.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-3-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The macro IPC_TIMEOUT is already in jiffies (it is also used like that
elsewhere in the file when calling wait_for_completion_timeout()). Don’t
convert it using helper functions for the purposes of calculating the
busy loop expiry time.
Fixes: e7b7ab3847 (“platform/x86: intel_scu_ipc: Sleeping is fine when polling”)
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-2-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In emit_tail_call() of bpf_jit_comp32.c, "blez t2" (t2 <= 0) is
not consistent with the comment "t2 < 0", update the comment to
keep consistency.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/1633915150-13220-3-git-send-email-yangtiezhu@loongson.cn
The config options MIPS_CBPF_JIT and MIPS_EBPF_JIT are useless, remove
them in arch/mips/Kconfig, and then modify arch/mips/net/Makefile.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/1633915150-13220-2-git-send-email-yangtiezhu@loongson.cn
DELL_WMI_PRIVACY is a feature toggle for the main dell-wmi driver,
so it must depend on the Kconfig option which enables the main
dell-wmi driver.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211011132338.407571-1-hdegoede@redhat.com
DELL_WMI_PRIVACY is a feature toggle for the main dell-wmi driver,
so it must depend on the Kconfig option which enables the main
dell-wmi driver.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211011132338.407571-1-hdegoede@redhat.com
* kvm-arm64/raz-sysregs:
: .
: Simplify the handling of RAZ register, removing pointless indirections.
: .
KVM: arm64: Replace get_raz_id_reg() with get_raz_reg()
KVM: arm64: Use get_raz_reg() for userspace reads of PMSWINC_EL0
KVM: arm64: Return early from read_id_reg() if register is RAZ
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reading a RAZ ID register isn't different from reading any other RAZ
register, so get rid of get_raz_id_reg() and replace it with get_raz_reg(),
which does the same thing, but does it without going through two layers of
indirection.
No functional change.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211011105840.155815-4-alexandru.elisei@arm.com
PMSWINC_EL0 is a write-only register and was initially part of the VCPU
register state, but was later removed in commit 7a3ba3095a ("KVM:
arm64: Remove PMSWINC_EL0 shadow register"). To prevent regressions, the
register was kept accessible from userspace as Read-As-Zero (RAZ).
The read function that is used to handle userspace reads of this
register is get_raz_id_reg(), which, while technically correct, as it
returns 0, it is not semantically correct, as PMSWINC_EL0 is not an ID
register as the function name suggests.
Add a new function, get_raz_reg(), to use it as the accessor for
PMSWINC_EL0, as to not conflate get_raz_id_reg() to handle other types
of registers.
No functional change intended.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211011105840.155815-3-alexandru.elisei@arm.com
If read_id_reg() is called for an ID register which is Read-As-Zero (RAZ),
it initializes the return value to zero, then goes through a list of
registers which require special handling before returning the final value.
By not returning as soon as it checks that the register should be RAZ, the
function creates the opportunity for bugs, if, for example, a patch changes
a register to RAZ (like has happened with PMSWINC_EL0 in commit
11663111cd), but doesn't remove the special handling from read_id_reg();
or if a register is RAZ in certain situations, but readable in others.
Return early to make it impossible for a RAZ register to be anything other
than zero.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211011105840.155815-2-alexandru.elisei@arm.com
Rename the wmaa-backlight-wmi driver and associated KConfig option to
remove the remaining references to the "WMAA" ACPI handle which was
used in the previous name. The driver has already been updated to
remove internal references to "WMAA". As part of the renaming, the
components in the name have been rearranged to reflect the standard
vendor_wmi_feature pattern.
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Link: https://lore.kernel.org/r/20210927202359.13684-2-ddadap@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The "wmaa" in the name of the wmaa-backlight-wmi driver was named after
the ACPI method handle for EC-based backlight control on the systems
this driver was tested on during development. However, this "WMAA"
handle is generated by the WMI compilation process, and isn't actually
a part of the backlight control mechanism which this driver supports.
Since the "WMAA" handle isn't actually a part of the firmware backlight
interface, the various identifiers in this driver using "WMAA" or
"wmaa" aren't actually appropriate.
As a common denominator across the systems supported by this driver is
that they are hybrid graphics systems with NVIDIA GPUs, using "nvidia"
in the driver name seems more appropriate than "wmaa". Update the
driver to remove "wmaa" and "WMAA" in identifier names where they
appear. The kerneldoc comments for the enum wmi_brightness_method
values are replaced with the verbatim text from the decompiled BMF code
for this WMI class.
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Link: https://lore.kernel.org/r/20210927202359.13684-1-ddadap@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix shift argument for function rol32(). It should be provided in bits,
while was provided in bytes.
Fixes: 86148190a7 ("platform/mellanox: mlxreg-io: Add support for complex attributes")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210927142214.2613929-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Change kstrtou32() argument 'base' to be zero instead of 'len'.
It works by chance for setting one bit value, but it is not supposed to
work in case value passed to mlxreg_io_attr_store() is greater than 1.
It works for example, for:
echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable
But it will fail for:
echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable,
where n > 1.
The flow for input buffer conversion is as below:
_kstrtoull(const char *s, unsigned int base, unsigned long long *res)
calls:
rv = _parse_integer(s, base, &_res);
For the second case, where n > 1:
- _parse_integer() converts 's' to 'val'.
For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3
'len' is set to 3 (string buffer 0x33 0x0a), etcetera.
- 'base' is equal or greater then '2' (length of input buffer).
As a result, _parse_integer() exits with result zero (rv):
rv = 0;
while (1) {
...
if (val >= base)-> (2 >= 2)
break;
...
rv++;
...
}
And _kstrtoull() in their turn will fail:
if (rv == 0)
return -EINVAL;
Fixes: 5ec4a8ace0 ("platform/mellanox: Introduce support for Mellanox register access driver")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210927142214.2613929-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix shift argument for function rol32(). It should be provided in bits,
while was provided in bytes.
Fixes: 86148190a7 ("platform/mellanox: mlxreg-io: Add support for complex attributes")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210927142214.2613929-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Change kstrtou32() argument 'base' to be zero instead of 'len'.
It works by chance for setting one bit value, but it is not supposed to
work in case value passed to mlxreg_io_attr_store() is greater than 1.
It works for example, for:
echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable
But it will fail for:
echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable,
where n > 1.
The flow for input buffer conversion is as below:
_kstrtoull(const char *s, unsigned int base, unsigned long long *res)
calls:
rv = _parse_integer(s, base, &_res);
For the second case, where n > 1:
- _parse_integer() converts 's' to 'val'.
For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3
'len' is set to 3 (string buffer 0x33 0x0a), etcetera.
- 'base' is equal or greater then '2' (length of input buffer).
As a result, _parse_integer() exits with result zero (rv):
rv = 0;
while (1) {
...
if (val >= base)-> (2 >= 2)
break;
...
rv++;
...
}
And _kstrtoull() in their turn will fail:
if (rv == 0)
return -EINVAL;
Fixes: 5ec4a8ace0 ("platform/mellanox: Introduce support for Mellanox register access driver")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210927142214.2613929-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
As described at Documentation/ABI/README doesn't contain an
Attribute: field.
The way sysfs ABI is supposed to work is that each different
attribute would have a separate file. So, the right way to
map this would be like:
/sys/.../dell_privacy_supported_type/mic_mute
/sys/.../dell_privacy_supported_type/camera_shutter
/sys/.../dell_privacy_current_state/mic_mute
/sys/.../dell_privacy_current_state/camera_shutter
However, it seems to late to fix that, as this was merged already on
Kernel 5.13, and a change right now would be a regression.
So, instead, let's at least fix the entry to match the expected
format.
While here, fix the format of the contact, which is not a valid
e-mail URL.
This should also fix the current warnings produced when building the
docs:
Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi:35: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi:2: WARNING: Unexpected indentation.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/42846621fdf2bf206feb114d06b14cbc47475fb5.1632740376.git.mchehab+huawei@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This change configures the MSPI controller to use 3-wire interface when
a slave device devictree nodes indicates this via the optional property.
Signed-off-by: Kamal Dasu <kdasu@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211008203603.40915-4-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding 32-bits and 64-bits per transfer modes using the SPCR3
register settings provided in MSPI controller ver >= 1.5
Signed-off-by: Kamal Dasu <kdasu@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211008203603.40915-2-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Intermittent Kernel crash has been observed on probe in
bcm_qspi_mspi_l2_isr() handler when the MSPI spifie interrupt bit
has not been cleared before registering for interrupts.
Fix the driver to move SoC specific custom interrupt handling code
before we register IRQ in probe. Also clear MSPI interrupt status
resgiter prior to registering IRQ handlers.
Fixes: cc20a38612 ("spi: iproc-qspi: Add Broadcom iProc SoCs support")
Signed-off-by: Kamal Dasu <kdasu@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211008203603.40915-3-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SH machine drivers have some ASoC DAI format specifications that use
older defines based on outdated terminology which we're trying to retire,
update to the new bindings.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210915172302.36677-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using fch clock controller as parent mclk source for rt5682
codec. Add config to enable clock framework support for 48MHz fixed
clock when machine driver config is selected.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211011055354.67719-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'component' is allocated in snd_soc_register_component(), but component->list
is not initalized, this may cause snd_soc_del_component_unlocked() deref null
ptr in the error handing case.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__list_del_entry_valid+0x81/0xf0
Call Trace:
snd_soc_del_component_unlocked+0x69/0x1b0 [snd_soc_core]
snd_soc_add_component.cold+0x54/0x6c [snd_soc_core]
snd_soc_register_component+0x70/0x90 [snd_soc_core]
devm_snd_soc_register_component+0x5e/0xd0 [snd_soc_core]
tas2552_probe+0x265/0x320 [snd_soc_tas2552]
? tas2552_component_probe+0x1e0/0x1e0 [snd_soc_tas2552]
i2c_device_probe+0xa31/0xbe0
Fix by adding INIT_LIST_HEAD() to snd_soc_component_initialize().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211009065840.3196239-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The following warning occurred sporadically on s390:
DMA-API: nvme 0006:00:00.0: device driver maps memory from kernel text or rodata [addr=0000000048cc5e2f] [len=131072]
WARNING: CPU: 4 PID: 825 at kernel/dma/debug.c:1083 check_for_illegal_area+0xa8/0x138
It is a false-positive warning, due to broken logic in debug_dma_map_sg().
check_for_illegal_area() checks for overlay of sg elements with kernel text
or rodata. It is called with sg_dma_len(s) instead of s->length as
parameter. After the call to ->map_sg(), sg_dma_len() will contain the
length of possibly combined sg elements in the DMA address space, and not
the individual sg element length, which would be s->length.
The check will then use the physical start address of an sg element, and
add the DMA length for the overlap check, which could result in the false
warning, because the DMA length can be larger than the actual single sg
element length.
In addition, the call to check_for_illegal_area() happens in the iteration
over mapped_ents, which will not include all individual sg elements if
any of them were combined in ->map_sg().
Fix this by using s->length instead of sg_dma_len(s). Also put the call to
check_for_illegal_area() in a separate loop, iterating over all the
individual sg elements ("nents" instead of "mapped_ents").
While at it, as suggested by Robin Murphy, also move check_for_stack()
inside the new loop, as it is similarly concerned with validating the
individual sg elements.
Link: https://lore.kernel.org/lkml/20210705185252.4074653-1-gerald.schaefer@linux.ibm.com
Fixes: 884d05970b ("dma-debug: use sg_dma_len accessor")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
htmldocs began producing the following warnings:
kernel/dma/mapping.c:256: WARNING: Definition list ends without a
blank line; unexpected unindent.
kernel/dma/mapping.c:257: WARNING: Bullet list ends without a blank
line; unexpected unindent.
Reformatting the list without hyphens fixes the warnings and produces
both a readable text and HTML output.
Fixes: fffe3cc8c2 ("dma-mapping: allow map_sg() ops to return negative error code")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/nouveau/nouveau_bo.c: In function ‘nouveau_ttm_tt_populate’:
drivers/gpu/drm/nouveau/nouveau_bo.c:1228:17: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/nouveau/nouveau_bo.c: In function ‘nouveau_ttm_tt_unpopulate’:
drivers/gpu/drm/nouveau/nouveau_bo.c:1252:17: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable]
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jeremy Kolb <jkolb@brandeis.edu>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416143725.2769053-8-lee.jones@linaro.org
In order to keep the code style consistency of the whole file,
the 'inst' assignments should be deleted.
The clang_analyzer complains as follows:
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c:499:8: warning:
Although the value storedto 'inst' is used in the enclosing expression,
the value is never actually read from 'inst'.
Karol: Removed unneeded brackets.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Luo penghao <luo.penghao@zte.com.cn>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210821021447.27097-1-luo.penghao@zte.com.cn
In order to keep the code style consistency of the whole file,
the 'ret' assignments should be deleted.
The clang_analyzer complains as follows:
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/uvmm.c:317:8⚠️
Although the value storedto 'ret' is used in the enclosing expression,
the value is never actually read from 'ret'.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Luo penghao <luo.penghao@zte.com.cn>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210821021106.27010-1-luo.penghao@zte.com.cn
'priv.h' included in 'base.c' is duplicated.
Remove all but the first include of priv.h from base.c.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: yong yiran <yong.yiran@zte.com.cn>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210807032054.642867-1-yong.yiran@zte.com.cn
When a timeout error occurs in i2c transter, it is usually related
to the i2c/dma IP hardware configuration. Therefore, the purpose of
this patch is to dump the key register values of i2c/dma when a
timeout occurs in i2c for debugging.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Due to changes in the hardware design of the handshaking signal
between i2c and dma, it is necessary to reset the handshaking
signal before each transfer to ensure that the multi-msgs can
be transferred correctly.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Allow polling time setting according to I2C frequency supported across
the system. For base frequency 400 KHz and 1 MHz set polling time is set
four times less than for system with base frequency 100KHz.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
1. Renesas RPC: fix unaligned bus access and QSPI data transfers in
manual modes.
2. Renesas RPC: select RESET_CONTROLLER as it is necessary for
operation.
3. FSL IFC: fix error paths.
4. Broadcom: allow building as module.
-----BEGIN PGP SIGNATURE-----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=ZsTv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OOXj
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.16
1. Renesas RPC: fix unaligned bus access and QSPI data transfers in
manual modes.
2. Renesas RPC: select RESET_CONTROLLER as it is necessary for
operation.
3. FSL IFC: fix error paths.
4. Broadcom: allow building as module.
* tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
memory: renesas-rpc-if: RENESAS_RPCIF should select RESET_CONTROLLER
memory: brcmstb_dpfe: Allow building Broadcom STB DPFE as module
memory: samsung: describe drivers in KConfig
memory: renesas-rpc-if: Avoid unaligned bus access for HyperFlash
memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode
dt-bindings: rpc: renesas-rpc-if: Add support for the R8A779A0 RPC-IF
Link: https://lore.kernel.org/r/20211010175836.13302-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add MT8195 support to the Mediatek SMI memory controller driver. This
brings also several cleanups and minor enhancements before adding actual
new device support.
-----BEGIN PGP SIGNATURE-----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=mga+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HHse
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.14 - Mediatek
Add MT8195 support to the Mediatek SMI memory controller driver. This
brings also several cleanups and minor enhancements before adding actual
new device support.
* tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
MAINTAINERS: Add entry for MediaTek SMI
memory: mtk-smi: mt8195: Add initial setting for smi-larb
memory: mtk-smi: mt8195: Add initial setting for smi-common
memory: mtk-smi: mt8195: Add smi support
memory: mtk-smi: Use devm_platform_ioremap_resource
memory: mtk-smi: Add clocks for smi-sub-common
memory: mtk-smi: Add device link for smi-sub-common
memory: mtk-smi: Add error handle for smi_probe
memory: mtk-smi: Adjust some code position
memory: mtk-smi: Rename smi_gen to smi_type
memory: mtk-smi: Use clk_bulk clock ops
dt-bindings: memory: mediatek: Add mt8195 smi sub common
dt-bindings: memory: mediatek: Add mt8195 smi binding
Link: https://lore.kernel.org/r/20211010175836.13302-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some later revisions after the original PASemi I2C controller introduce
what likely is an enable bit to the CTL register. Without setting it the
actual i2c transmission is never started.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
With all the previous preparations we can now finally add
the platform driver to support the PASemi-based controllers
in Apple SoCs. This does not work on the M1 yet but should
work on the early iPhones already.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
