Commit graph

1,058,063 commits

Author SHA1 Message Date
Matthew Hagan
56e4e54842 ARM: dts: NSP: Fix MX64/MX65 eeprom node name
Running dtbs_check yields the following message when checking the
MX64/MX65 devicetree:
at24@50: $nodename:0: 'at24@50' does not match '^eeprom@[0-9a-f]{1,2}$'

This patch fixes the issue by renaming the at24 node appropriately.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:58 -07:00
Matthew Hagan
38f8111369 ARM: dts: NSP: Fix MDIO mux node names
While functional, the mdio-mux-mmioreg binding does not conform to
Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml in that an
mdio-mux compatible is also required. Without this the following output
is observed when running dtbs_check:

mdio-mux@32000: compatible: ['mdio-mux-mmioreg'] is too short

This change brings conformance to this requirement and corresponds
likewise to Rafal Milecki's change to the BCM5301x platform[1].

[1] https://lore.kernel.org/linux-arm-kernel/20210822191256.3715003-1-f.fainelli@gmail.com/T/

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:57 -07:00
Matthew Hagan
15a563d008 ARM: dts: NSP: Fix mpcore, mmc node names
Running dtbs_check yielded the issues with bcm-nsp.dtsi.

Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:56 -07:00
Matthew Hagan
695717eb4c ARM: dts: NSP: Add bcm958623hr board name to dts
This board was previously added to
Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
however the dts file was not updated to reflect this change. This patch
corrects bcm958623hr.dts by adding the board name to the compatible.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:55 -07:00
Rafał Miłecki
c5e1df3276 ARM: dts: BCM5301X: Fix memory nodes names
Thix fixes:
arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']}
arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:55 -07:00
Rafał Miłecki
6ee0b56f75 ARM: dts: BCM5301X: Fix MDIO mux binding
This fixes following error for all BCM5301X dts files:
mdio-bus-mux@18003000: compatible: ['mdio-mux-mmioreg'] is too short

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:54 -07:00
Rafał Miłecki
9dba049b6d ARM: dts: BCM5301X: Fix nodes names
This fixes following errors for all BCM5301X dts files:
chipcommonA@18000000: $nodename:0: 'chipcommonA@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mdio-bus-mux@18003000: $nodename:0: 'mdio-bus-mux@18003000' does not match '^mdio-mux[\\-@]?'
dmu@1800c000: $nodename:0: 'dmu@1800c000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:53 -07:00
Matthew Hagan
af413758ea ARM: dts: NSP: Add DT files for Meraki MX65 series
MX65 & MX65W Hardware info:
  - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
  - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
  - Storage: 1 GB (Micron MT29F8G08ABACA)
  - Networking: BCM58625 switch (2x 1GbE ports)
    2x Qualcomm QCA8337 switches (10x 1GbE ports total)
  - PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
  - USB: 1x USB2.0
  - Serial: Internal header
  - WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.

Note that a driver and firmware image for the BCM59111 PSE has been
released under GPL, but this is not present in the kernel.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:53 -07:00
Matthew Hagan
d50a0923f3 ARM: dts: NSP: Add DT files for Meraki MX64 series
MX64 & MX64W Hardware info:
  - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
  - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
  - Storage: 1 GB (Micron MT29F8G08ABACA)
  - Networking: BCM58625 internal switch (5x 1GbE ports)
  - USB: 1x USB2.0
  - Serial: Internal header
  - WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus

This patch adds the Meraki MX64 series-specific bindings. Since some
devices make use of the older A0 SoC, changes need to be made to
accommodate this case, including removal of coherency options and
modification to the secondary-boot-reg.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:52 -07:00
Matthew Hagan
2698fbb457 ARM: dts: NSP: Add Ax stepping modifications
While uncommon, some Ax NSP SoCs exist in the wild. This stepping
requires a modified secondary CPU boot-reg and removal of DMA coherency
properties. Without these modifications, the secondary CPU will be
inactive and many peripherals will exhibit undefined behaviour.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:51 -07:00
Matthew Hagan
f509d4a78a ARM: dts: NSP: Add common bindings for MX64/MX65
These bindings are required for all Meraki MX64/MX65 devices. These
common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND
partitions, EHCI, OHCI and pinctrl.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:50 -07:00
Matthew Hagan
e544f2cfb2 dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
Add bindings for the Meraki MX64/MX65 series.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:50 -07:00
Matthew Hagan
4bb2642cbd ARM: dts: NSP: Move USB3 PHY to internal MDIO bus
This patch largely replicates Vivek Unune's patch "ARM: dts:
BCM5301X:Make usb3 phy use mdio phy driver"[1] for the NSP platform,
whereby we need to create an mdio-mux to facilitate switches
configured via external MDIO, in this case on the Meraki MX65.

However in doing so, we are creating an overlap with usb3_phy's
ccb-mii range. To resolve this, usb3_phy should be moved to a child
node of the internal MDIO bus. The result is heavily based upon Vivek's
patch. This has also been cross-referenced with Yendapally Reddy's
earlier work which utilised the subsequently dropped brcm,nsp-usb3-phy
driver: "[PATCH v2 4/4] arm: dts: nsp: Add USB nodes to device tree"
[2]. Finally, this change provides conformance to the bcm-ns-usb3-phy
documentation, utilising the required usb3-dmp-syscon property. Note
that support for the deprecated ccb-mii bindings has been dropped as of
"phy: phy-bcm-ns-usb3: drop support for deprecated DT binding"[3].

[1] https://lore.kernel.org/patchwork/patch/933971/
[2] https://www.spinics.net/lists/arm-kernel/msg555132.html
[3] https://lore.kernel.org/linux-devicetree/20201113113423.9466-1-zajec5@gmail.com/

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:49 -07:00
Matthew Hagan
2644193266 ARM: dts: NSP: add MDIO bus controller node
This patch adds the node for the MDIO bus controller, present on the NSP
SoC.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:48 -07:00
Matthew Hagan
986fad2beb ARM: dts: NSP: disable qspi node by default
The QSPI bus is enabled by default, however this may not used on all
devices. This patch disables by default, requiring it to be explicitly
enabled where required.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:48 -07:00
Matthew Hagan
6e41ab534f ARM: dts: NSP: enable DMA on bcm988312hr
The previous patch "ARM: dts: NSP: Disable PL330 by default, add
dma-coherent property" set the DMAC to disabled by default, requiring it
to be manually enabled on each device. The bcm988312hr was mistakenly
omitted. This patch adds it back.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:47 -07:00
Matthew Hagan
239cf17718 dt-bindings: arm: bcm: add NSP devices to SoCs
Currently only the SoC names are added. This patch expands these to add
the devices.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:46 -07:00
Matthew Hagan
e5a8339e13 ARM: dts: NSP: add device names to compatible
Currently only the SoC type and platform are specified for all NSP
devices. This patch adds the device names.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14 14:34:45 -07:00
Akira Yokosawa
242f4c77b1 docs: zh_TW/index: Move arm64/index to arch-specific section
arm64/index is architecture specific.
Move it to the section "特定體系結構文檔" or "Architecture-specific
documentation".

Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Fixes: e5cb9494fe ("docs/zh_TW: add translations for zh_TW/arm64")
Cc: Hu Haowen <src.res@email.cn>
Link: https://lore.kernel.org/r/53d86385-b4db-5d02-be6b-795900166f17@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-09-14 15:15:43 -06:00
Junhua Huang
121ca40797 docs/zh_CN: Add zh_CN/admin-guide/sysrq.rst
Add translation zh_CN/admin-guide/sysrq.rst and link it to
zh_CN/admin-guide/index.rst while clean its todo entry.

Signed-off-by: Junhua Huang <huang.junhua@zte.com.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20210910022531.243882-1-junhuahuangdream@163.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-09-14 15:13:54 -06:00
Marijn Suijten
6e714b5838 clk: qcom: gpucc-sdm660: Remove fallback to global clock names
The necessary clocks for this driver are already fully specified in
sdm630 DT under the .fw_name, and do not need an implicit fallback to
their global name.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210829204822.289829-5-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-09-14 14:09:48 -07:00
Marijn Suijten
916e9eceb0 clk: qcom: mmcc-sdm660: Use ARRAY_SIZE for num_parents
Where possible, use ARRAY_SIZE to determine the number of parents in
clk_parent_data, instead of hardcoding it.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210829204822.289829-4-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-09-14 14:09:48 -07:00
Marijn Suijten
7340264ee4 clk: qcom: gpucc-sdm660: Use ARRAY_SIZE for num_parents
Where possible, use ARRAY_SIZE to determine the number of parents in
clk_parent_data, instead of hardcoding it.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210829204822.289829-3-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-09-14 14:09:48 -07:00
Marijn Suijten
00ff818888 clk: qcom: gcc-sdm660: Use ARRAY_SIZE for num_parents
Where possible, use ARRAY_SIZE to determine the number of parents in
clk_parent_data instead of hardcoding a number that relies on an array
defined hundreds of lines above.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210829204822.289829-2-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-09-14 14:09:47 -07:00
Utkarsh Verma
3454cd5616 Documentation: checkpatch: Add SYMBOLIC_PERMS message
Add a new message type SYMBOLIC_PERMS under the 'Permissions'
subsection. Octal permission bits are easier to read and understand
instead of their symbolic macro names.

Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Utkarsh Verma <utkarshverma294@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Link: https://lore.kernel.org/r/20210904082330.14864-1-utkarshverma294@gmail.com
[jc: Tweaked wording as suggested by Dwaipayan Ray]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-09-14 15:09:24 -06:00
Utkarsh Verma
29bd0cace2 Documentation: checkpatch: Add TRAILING_SEMICOLON message
Add a new message type TRAILING_SEMICOLON for the macro definitions
that conclude with a semicolon.

Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Utkarsh Verma <utkarshverma294@gmail.com>
Link: https://lore.kernel.org/r/20210904074201.13532-1-utkarshverma294@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-09-14 15:07:49 -06:00
Utkarsh Verma
d9548979f7 Documentation: checkpatch: Add SPLIT_STRING message
Add a new message type SPLIT_STRING under the 'Indentation and Line
Breaks' subsection. Checkpatch documentation for the splitting of
quoted strings that appear in userspace, across multiple lines.

Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Utkarsh Verma <utkarshverma294@gmail.com>
Link: https://lore.kernel.org/r/20210904073621.12987-1-utkarshverma294@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-09-14 15:07:26 -06:00
Li Xinhai
d7482c0da7 Doc: page_migration: fix numbering for non-LRU movable flags
The non-LRU movable flags part is not relevant to above 3 funcitons, so remove
the number 4.

Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>

Link: https://lore.kernel.org/r/20210908145215.592325-1-lixinhai.lxh@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-09-14 14:54:01 -06:00
Stephen Kitt
f99b4fe27f docs: block: fix discard_max_bytes references
When discard_max_hw_bytes was introduced, in commit 0034af0365
("block: make /sys/block/<dev>/queue/discard_max_bytes writeable"),
the discard_max_bytes documentation section was renamed to
discard_max_hw_bytes, but the references it contains to
discard_max_bytes weren't updated.

This patch refers to discard_max_hw_bytes instead. It also reflows the
paragraph so that sentences end lines.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20210910105142.2116749-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-09-14 14:50:41 -06:00
Thomas Gleixner
31c9d7c829 Documentation/process: Add tip tree handbook
Add a document to the subsystem/maintainer handbook section, which explains
what the tip tree is, how it operates and what rules and expectations it
has.

  [ bp:

   - Add a SPDX identifier, work in most comments from the thread.
   - 9bf19b78a2 ("Documentation/submitting-patches: Document the SoB
     chain") is also in the main Documentation but I'm leaving the
     paragraph here because it has the proper structure - text talks about
     SoBs and referencing somewhere else would interrupt the flow.
   - Move backtraces in changelogs to main submitting-patches.rst.
   - "Patch version information" is explained to a great detail in
     submitting-patches.rst too.
   - Hyperlink resend reminders section.
  ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Link: https://lkml.kernel.org/r/20181107171149.165693799@linutronix.de
Link: https://lore.kernel.org/r/20210913153942.15251-3-bp@alien8.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-09-14 14:46:49 -06:00
Thomas Gleixner
604370e106 Documentation/process: Add maintainer handbooks section
General rules for patch submission, coding style and related details are
available, but most subsystems have their subsystem-specific extra rules
which differ or go beyond the common rules.

Mark suggested to add a subsystem/maintainer handbook section, where
subsystem maintainers can explain their specific quirks.

Add the section and link to it from the submitting-patches document.

  [ bp: Add a SPDX identifier. ]

Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20181107171149.074948887@linutronix.de
Link: https://lore.kernel.org/r/20210913153942.15251-2-bp@alien8.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-09-14 14:46:49 -06:00
Huang Rui
3ca706c189 drm/ttm: fix type mismatch error on sparc64
On sparc64, __fls() returns an "int", but the drm TTM code expected it
to be "unsigned long" as on x86.  As a result, on sparc (and arc, and
m68k) you get build errors because 'min()' checks that the types match.

As suggested by Linus, it can use min_t instead of min to force the type
to be "unsigned int".

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-14 13:36:02 -07:00
José Roberto de Souza
5f0d421493 drm/i915/dg1: Add new PCI id
New DG1 PCI id.

BSpec: 44463
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913181909.35237-1-jose.souza@intel.com
2021-09-14 13:29:09 -07:00
Linus Torvalds
77e02cf57b memblock: introduce saner 'memblock_free_ptr()' interface
The boot-time allocation interface for memblock is a mess, with
'memblock_alloc()' returning a virtual pointer, but then you are
supposed to free it with 'memblock_free()' that takes a _physical_
address.

Not only is that all kinds of strange and illogical, but it actually
causes bugs, when people then use it like a normal allocation function,
and it fails spectacularly on a NULL pointer:

   https://lore.kernel.org/all/20210912140820.GD25450@xsang-OptiPlex-9020/

or just random memory corruption if the debug checks don't catch it:

   https://lore.kernel.org/all/61ab2d0c-3313-aaab-514c-e15b7aa054a0@suse.cz/

I really don't want to apply patches that treat the symptoms, when the
fundamental cause is this horribly confusing interface.

I started out looking at just automating a sane replacement sequence,
but because of this mix or virtual and physical addresses, and because
people have used the "__pa()" macro that can take either a regular
kernel pointer, or just the raw "unsigned long" address, it's all quite
messy.

So this just introduces a new saner interface for freeing a virtual
address that was allocated using 'memblock_alloc()', and that was kept
as a regular kernel pointer.  And then it converts a couple of users
that are obvious and easy to test, including the 'xbc_nodes' case in
lib/bootconfig.c that caused problems.

Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 40caa127f3 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-14 13:23:22 -07:00
Nirmoy Das
b04ce53eac drm/amdgpu: use IS_ERR for debugfs APIs
debugfs APIs returns encoded error so use
IS_ERR for checking return value.

v2: return PTR_ERR(ent)

References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-By: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-09-14 16:21:15 -04:00
Christian Gmeiner
500e6dfbb4 arm64: dts: ti: k3-am64-mcu: Add pinctrl
Add the definition of the pinctrl for the MCU domain.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210818111747.88569-1-christian.gmeiner@gmail.com
2021-09-14 15:18:35 -05:00
Simon Ser
7bbee36d71 amd/display: downgrade validation failure log level
In amdgpu_dm_atomic_check, dc_validate_global_state is called. On
failure this logs a warning to the kernel journal. However warnings
shouldn't be used for atomic test-only commit failures: user-space
might be perfoming a lot of atomic test-only commits to find the
best hardware configuration.

Downgrade the log to a regular DRM atomic message. While at it, use
the new device-aware logging infrastructure.

This fixes error messages in the kernel when running gamescope [1].

[1]: https://github.com/Plagman/gamescope/issues/245

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 16:18:33 -04:00
Christian König
c92db8d64f drm/amdgpu: fix use after free during BO move
The memory backing old_mem is already freed at that point, move the
check a bit more up.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: bfa3357ef9 ("drm/ttm: allocate resource object instead of embedding it v2")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1699
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-09-14 16:17:39 -04:00
Kenneth Feng
5598d7c21a drm/amd/pm: fix the issue of uploading powerplay table
fix the issue of uploading powerplay table due to the dependancy of rlc.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-09-14 16:15:21 -04:00
Ernst Sjöstrand
67a44e6598 drm/amd/amdgpu: Increase HWIP_MAX_INSTANCE to 10
Seems like newer cards can have even more instances now.
Found by UBSAN: array-index-out-of-bounds in
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:318:29
index 8 is out of range for type 'uint32_t *[8]'

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1697
Cc: stable@vger.kernel.org
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 16:14:41 -04:00
xinhui pan
0fcfb30019 drm/amdgpu: Fix a race of IB test
Direct IB submission should be exclusive. So use write lock.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 15:59:58 -04:00
xinhui pan
405a81ae3f drm/amdgpu: VCN avoid memory allocation during IB test
alloc extra msg from direct IB pool.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 15:59:58 -04:00
xinhui pan
cb9038aa8a drm/amdgpu: VCE avoid memory allocation during IB test
alloc extra msg from direct IB pool.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 15:59:58 -04:00
xinhui pan
68331d7cf3 drm/amdgpu: UVD avoid memory allocation during IB test
move BO allocation in sw_init.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 15:59:58 -04:00
Candice Li
de3a1e3360 drm/amdgpu: Unify PSP TA context
Remove all TA binary structures and add the specific binary
structure in struct ta_context.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 15:59:58 -04:00
James Zhu
9cec53c18a drm/amdgpu: move iommu_resume before ip init/resume
Separate iommu_resume from kfd_resume, and move it before
other amdgpu ip init/resume.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 15:59:58 -04:00
James Zhu
ea20e246f3 drm/amdgpu: add amdgpu_amdkfd_resume_iommu
Add amdgpu_amdkfd_resume_iommu for amdgpu.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 15:59:58 -04:00
James Zhu
f8846323d5 drm/amdkfd: separate kfd_iommu_resume from kfd_resume
Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.

v2: squash in fix for !CONFIG_HSA_AMD

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 15:59:46 -04:00
shaoyunl
8e6d0b6996 drm/amdgpu: Get atomicOps info from Host for sriov setup
The AtomicOp Requester Enable bit is reserved in VFs and the PF value applies to all
associated VFs. so guest driver can not directly enable the atomicOps for VF, it
depends on PF to enable it. In current design, amdgpu driver  will get the enabled
atomicOps bits through private pf2vf data

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 15:57:11 -04:00
Michael Strauss
3da35006fe drm/amd/display: Enable mem low power control for DCN3.1 sub-IP blocks
[WHY]
Sequences to handle powering down these sub-IP blocks are now ready for use

Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14 15:57:11 -04:00