Commit graph

1,058,063 commits

Author SHA1 Message Date
Minas Harutyunyan
dbe2518b2d usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA
When last descriptor in a descriptor list completed with XferComplete
interrupt, core switching to handle next descriptor and assert BNA
interrupt. Both these interrupts are set while dwc2_hsotg_epint()
handler called. Each interrupt should be handled separately: first
XferComplete interrupt then BNA interrupt, otherwise last completed
transfer will not be giveback to function driver as completed
request.

Fixes: 729cac693e ("usb: dwc2: Change ISOC DDMA flow")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:42:00 +02:00
Kishon Vijay Abraham I
5cf86349e9 usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd()
No functional change. Since configuration to stop HCD is invoked from
multiple places, group all of them in usb_stop_hcd().

Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-4-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:41:30 +02:00
Kishon Vijay Abraham I
b7a0a792f8 xhci: Set HCD flag to defer primary roothub registration
Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer
registering primary roothub in usb_add_hcd(). This will make sure both
primary roothub and secondary roothub will be registered along with the
second HCD. This is required for cold plugged USB devices to be detected
in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM
or J7200 EVM).

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:41:30 +02:00
Kishon Vijay Abraham I
58877b0824 usb: core: hcd: Add support for deferring roothub registration
It has been observed with certain PCIe USB cards (like Inateck connected
to AM64 EVM or J7200 EVM) that as soon as the primary roothub is
registered, port status change is handled even before xHC is running
leading to cold plug USB devices not detected. For such cases, registering
both the root hubs along with the second HCD is required. Add support for
deferring roothub registration in usb_add_hcd(), so that both primary and
secondary roothubs are registered along with the second HCD.

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:41:30 +02:00
Maxime Ripard
a43dd76bac
drm/vc4: dsi: Switch to devm_drm_of_get_bridge
The new devm_drm_of_get_bridge removes most of the boilerplate we
have to deal with. Let's switch to it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910130941.1740182-4-maxime@cerno.tech
2021-09-14 10:40:24 +02:00
Maxime Ripard
0caddbbfdf
drm/vc4: dpi: Switch to devm_drm_of_get_bridge
The new devm_drm_of_get_bridge removes most of the boilerplate we
have to deal with. Let's switch to it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910130941.1740182-3-maxime@cerno.tech
2021-09-14 10:39:30 +02:00
Maxime Ripard
87ea95808d
drm/bridge: Add a function to abstract away panels
Display drivers so far need to have a lot of boilerplate to first
retrieve either the panel or bridge that they are connected to using
drm_of_find_panel_or_bridge(), and then either deal with each with ad-hoc
functions or create a drm panel bridge through drm_panel_bridge_add.

In order to reduce the boilerplate and hopefully create a path of least
resistance towards using the DRM panel bridge layer, let's create the
function devm_drm_of_get_bridge() to reduce that boilerplate.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910130941.1740182-2-maxime@cerno.tech
2021-09-14 10:39:01 +02:00
Joel Stanley
3c8cf108d0 ARM: configs: aspeed_g5: Reneable DRM_FBDEV_EMULATION
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling
DRM_FBDEV_EMULATION for configurations that had it enabled.

Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-14 18:08:02 +09:30
Minas Harutyunyan
91bb163e1e usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave
According USB spec each ISOC transaction should be performed in a
designated for that transaction interval. On bus errors or delays
in operating system scheduling of client software can result in no
packet being transferred for a (micro)frame. An error indication
should be returned as status to the client software in such a case.

Current implementation in case of missed/dropped interval send same
data in next possible interval instead of reporting missed isoc.

This fix complete requests with -ENODATA if interval elapsed.

HSOTG core in BDMA and Slave modes haven't HW support for
(micro)frames tracking, this is why SW should care about tracking
of (micro)frames. Because of that method and consider operating
system scheduling delays, added few additional checking's of elapsed
target (micro)frame:
1. Immediately before enabling EP to start transfer.
2. With any transfer completion interrupt.
3. With incomplete isoc in/out interrupt.
4. With EP disabled interrupt because of incomplete transfer.
5. With OUT token received while EP disabled interrupt (for OUT
transfers).
6. With NAK replied to IN token interrupt (for IN transfers).

As part of ISOC flow, additionally fixed 'current' and 'target' frame
calculation functions. In HS mode SOF limits provided by DSTS register
is 0x3fff, but in non HS mode this limit is 0x7ff.

Tested by internal tool which also using for dwc3 testing.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:35:10 +02:00
Li Jun
8cfac9a674 usb: dwc3: core: balance phy init and exit
After we start to do core soft reset while usb role switch,
the phy init is invoked at every switch to device mode, but
its counter part de-init is missing, this causes the actual
phy init can not be done when we really want to re-init phy
like system resume, because the counter maintained by phy
core is not 0. considering phy init is actually redundant for
role switch, so move out the phy init from core soft reset to
dwc3 core init where is the only place required.

Fixes: f88359e158 ("usb: dwc3: core: Do core softreset when switch mode")
Cc: <stable@vger.kernel.org>
Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Tested-by: John Stultz <john.stultz@linaro.org> #HiKey960
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1631068099-13559-1-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:34:50 +02:00
Rafał Miłecki
d91adc5322 Revert "USB: bcma: Add a check for devm_gpiod_get"
This reverts commit f3de5d857b.

That commit broke USB on all routers that have USB always powered on and
don't require toggling any GPIO. It's a majority of devices actually.

The original code worked and seemed safe: vcc GPIO is optional and
bcma_hci_platform_power_gpio() takes care of checking the pointer before
using it.

This revert fixes:
[   10.801127] bcma_hcd: probe of bcma0:11 failed with error -2

Fixes: f3de5d857b ("USB: bcma: Add a check for devm_gpiod_get")
Cc: stable <stable@vger.kernel.org>
Cc: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20210831065419.18371-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:34:15 +02:00
Guenter Roeck
aad06846a2 usb: ehci: Simplify platform driver registration
Use platform_register_drivers() and platform_unregister_drivers() to
register and unregister ehci platform drivers. This simplifies the code
and prevents the following build errors seen with sparc:allmodconfig.

drivers/usb/host/ehci-hcd.c:1301: error:
	"PLATFORM_DRIVER" redefined
drivers/usb/host/ehci-sh.c:173:31: error:
	'ehci_hcd_sh_driver' defined but not used

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907123002.3951446-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:33:52 +02:00
Johan Hovold
91fac0741d USB: cdc-acm: fix minor-number release
If the driver runs out of minor numbers it would release minor 0 and
allow another device to claim the minor while still in use.

Fortunately, registering the tty class device of the second device would
fail (with a stack dump) due to the sysfs name collision so no memory is
leaked.

Fixes: cae2bc768d ("usb: cdc-acm: Decrement tty port's refcount if probe() fail")
Cc: stable@vger.kernel.org      # 4.19
Cc: Jaejoong Kim <climbbb.kim@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210907082318.7757-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:33:40 +02:00
Yang Yingliang
856e6e8e0f usb: dwc2: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:32:56 +02:00
Pawel Laszczak
b69ec50b3e usb: cdns3: fix race condition before setting doorbell
For DEV_VER_V3 version there exist race condition between clearing
ep_sts.EP_STS_TRBERR and setting ep_cmd.EP_CMD_DRDY bit.
Setting EP_CMD_DRDY will be ignored by controller when
EP_STS_TRBERR is set. So, between these two instructions we have
a small time gap in which the EP_STSS_TRBERR can be set. In such case
the transfer will not start after setting doorbell.

Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org> # 5.12.x
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210907062619.34622-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:32:41 +02:00
Dan Carpenter
17956b53eb usb: gadget: r8a66597: fix a loop in set_feature()
This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts.  But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.

This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.

Fixes: 96fe53ef54 ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:32:27 +02:00
Pavel Hofman
f5dfd98a80 usb: gadget: u_audio: EP-OUT bInterval in fback frequency
The patch increases the bitshift in feedback frequency
calculation with EP-OUT bInterval value.

Tests have revealed that Win10 and OSX UAC2 drivers require
the feedback frequency to be based on the actual packet
interval instead of on the USB2 microframe. Otherwise they
ignore the feedback value. Linux snd-usb-audio driver
detects the applied bitshift automatically.

Tested-by: Henrik Enquist <henrik.enquist@gmail.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210906130822.12256-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:32:06 +02:00
Keith Busch
70f437fb43 nvme-tcp: fix io_work priority inversion
Dispatching requests inline with the .queue_rq() call may block while
holding the send_mutex. If the tcp io_work also happens to schedule, it
may see the req_list is non-empty, leaving "pending" true and remaining
in TASK_RUNNING. Since io_work is of higher scheduling priority, the
.queue_rq task may not get a chance to run, blocking forward progress
and leading to io timeouts.

Instead of checking for pending requests within io_work, let the queueing
restart io_work outside the send_mutex lock if there is more work to be
done.

Fixes: a0fdd14180 ("nvme-tcp: rerun io_work if req_list is not empty")
Reported-by: Samuel Jones <sjones@kalrayinc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-14 10:32:05 +02:00
Ruozhu Li
9817d763db nvme-rdma: destroy cm id before destroy qp to avoid use after free
We should always destroy cm_id before destroy qp to avoid to get cma
event after qp was destroyed, which may lead to use after free.
In RDMA connection establishment error flow, don't destroy qp in cm
event handler.Just report cm_error to upper level, qp will be destroy
in nvme_rdma_alloc_queue() after destroy cm id.

Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-14 10:32:04 +02:00
Anton Eidelman
79f528afa9 nvme-multipath: fix ANA state updates when a namespace is not present
nvme_update_ana_state() has a deficiency that results in a failure to
properly update the ana state for a namespace in the following case:

  NSIDs in ctrl->namespaces:	1, 3,    4
  NSIDs in desc->nsids:		1, 2, 3, 4

Loop iteration 0:
    ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH.
Loop iteration 1:
    ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH.
Loop iteration 2:
    ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH.

Where the update to the ANA state of NSID 3 is missed.  To fix this
increment n and retry the update with the same ns when ns->head->ns_id is
higher than nsid,

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2021-09-14 10:32:04 +02:00
Faizel K B
f81c08f897 usb: testusb: Fix for showing the connection speed
testusb' application which uses 'usbtest' driver reports 'unknown speed'
from the function 'find_testdev'. The variable 'entry->speed' was not
updated from  the application. The IOCTL mentioned in the FIXME comment can
only report whether the connection is low speed or not. Speed is read using
the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade.  The
call is implemented in the function 'handle_testdev' where the file
descriptor was availble locally. Sample output is given below where 'high
speed' is printed as the connected speed.

sudo ./testusb -a
high speed      /dev/bus/usb/001/011    0
/dev/bus/usb/001/011 test 0,    0.000015 secs
/dev/bus/usb/001/011 test 1,    0.194208 secs
/dev/bus/usb/001/011 test 2,    0.077289 secs
/dev/bus/usb/001/011 test 3,    0.170604 secs
/dev/bus/usb/001/011 test 4,    0.108335 secs
/dev/bus/usb/001/011 test 5,    2.788076 secs
/dev/bus/usb/001/011 test 6,    2.594610 secs
/dev/bus/usb/001/011 test 7,    2.905459 secs
/dev/bus/usb/001/011 test 8,    2.795193 secs
/dev/bus/usb/001/011 test 9,    8.372651 secs
/dev/bus/usb/001/011 test 10,    6.919731 secs
/dev/bus/usb/001/011 test 11,   16.372687 secs
/dev/bus/usb/001/011 test 12,   16.375233 secs
/dev/bus/usb/001/011 test 13,    2.977457 secs
/dev/bus/usb/001/011 test 14 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 17,    0.148826 secs
/dev/bus/usb/001/011 test 18,    0.068718 secs
/dev/bus/usb/001/011 test 19,    0.125992 secs
/dev/bus/usb/001/011 test 20,    0.127477 secs
/dev/bus/usb/001/011 test 21 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 24,    4.133763 secs
/dev/bus/usb/001/011 test 27,    2.140066 secs
/dev/bus/usb/001/011 test 28,    2.120713 secs
/dev/bus/usb/001/011 test 29,    0.507762 secs

Signed-off-by: Faizel K B <faizel.kb@dicortech.com>
Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:31:41 +02:00
Eugene Syromiatnikov
844f7eaaed include/uapi/linux/xfrm.h: Fix XFRM_MSG_MAPPING ABI breakage
Commit 2d151d3907 ("xfrm: Add possibility to set the default to block
if we have no policy") broke ABI by changing the value of the XFRM_MSG_MAPPING
enum item, thus also evading the build-time check
in security/selinux/nlmsgtab.c:selinux_nlmsg_lookup for presence of proper
security permission checks in nlmsg_xfrm_perms.  Fix it by placing
XFRM_MSG_SETDEFAULT/XFRM_MSG_GETDEFAULT to the end of the enum, right before
__XFRM_MSG_MAX, and updating the nlmsg_xfrm_perms accordingly.

Fixes: 2d151d3907 ("xfrm: Add possibility to set the default to block if we have no policy")
References: https://lore.kernel.org/netdev/20210901151402.GA2557@altlinux.org/
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Antony Antony <antony.antony@secunet.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-09-14 10:31:35 +02:00
Ajay Garg
6b0be25ca0 usb: gadget: fix for a typo that conveys logically-inverted information.
Upon calling usb_ep_autoconfig_release(), the endpoint becomes *not
valid*.

Signed-off-by: Ajay Garg <ajaygargnsit@gmail.com>
Link: https://lore.kernel.org/r/20210909120624.77557-1-ajaygargnsit@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:27:54 +02:00
Colin Ian King
5b5ec04fb2 usb: gadget: goku_udc: Fix mask and set operation on variable master
The variable master is being masked with ~MST_R_BITS however this
masked value is never used, the following updates to master are
assignments. I suspect the original intention was to mask out the
MST_R_BITS and then bit-wise or in the appropriate read bits rather
than perform an assignment. Fix this by using the |= operator rather
than a straight assignment.

Note that this code is pre-git history, so I can't find a sha for
it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210910163131.94796-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:27:23 +02:00
Tony Luck
81065b35e2 x86/mce: Avoid infinite loop for copy from user recovery
There are two cases for machine check recovery:

1) The machine check was triggered by ring3 (application) code.
   This is the simpler case. The machine check handler simply queues
   work to be executed on return to user. That code unmaps the page
   from all users and arranges to send a SIGBUS to the task that
   triggered the poison.

2) The machine check was triggered in kernel code that is covered by
   an exception table entry. In this case the machine check handler
   still queues a work entry to unmap the page, etc. but this will
   not be called right away because the #MC handler returns to the
   fix up code address in the exception table entry.

Problems occur if the kernel triggers another machine check before the
return to user processes the first queued work item.

Specifically, the work is queued using the ->mce_kill_me callback
structure in the task struct for the current thread. Attempting to queue
a second work item using this same callback results in a loop in the
linked list of work functions to call. So when the kernel does return to
user, it enters an infinite loop processing the same entry for ever.

There are some legitimate scenarios where the kernel may take a second
machine check before returning to the user.

1) Some code (e.g. futex) first tries a get_user() with page faults
   disabled. If this fails, the code retries with page faults enabled
   expecting that this will resolve the page fault.

2) Copy from user code retries a copy in byte-at-time mode to check
   whether any additional bytes can be copied.

On the other side of the fence are some bad drivers that do not check
the return value from individual get_user() calls and may access
multiple user addresses without noticing that some/all calls have
failed.

Fix by adding a counter (current->mce_count) to keep track of repeated
machine checks before task_work() is called. First machine check saves
the address information and calls task_work_add(). Subsequent machine
checks before that task_work call back is executed check that the address
is in the same page as the first machine check (since the callback will
offline exactly one page).

Expected worst case is four machine checks before moving on (e.g. one
user access with page faults disabled, then a repeat to the same address
with page faults enabled ... repeat in copy tail bytes). Just in case
there is some code that loops forever enforce a limit of 10.

 [ bp: Massage commit message, drop noinstr, fix typo, extend panic
   messages. ]

Fixes: 5567d11c21 ("x86/mce: Send #MC singal from task work")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/YT/IJ9ziLqmtqEPu@agluck-desk2.amr.corp.intel.com
2021-09-14 10:27:03 +02:00
Cristian Birsan
6854ccc468 USB: host: ehci-atmel: Add support for HSIC phy
Add support for USB Host High Speed Port HSIC phy.

Tested-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20210910163842.1596407-3-cristian.birsan@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:26:29 +02:00
Cristian Birsan
6a9a7a1a09 dt-bindings: usb: atmel: add USB PHY type property
Add USB PHY type property for controllers with HSIC support.

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20210910163842.1596407-2-cristian.birsan@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:26:29 +02:00
Neal Liu
7f2d73788d usb: ehci: handshake CMD_RUN instead of STS_HALT
For Aspeed, HCHalted status depends on not only Run/Stop but also
ASS/PSS status.
Handshake CMD_RUN on startup instead.

Tested-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:26:02 +02:00
Colin Ian King
18d6b39ee8 usb: gadget: f_uac2: clean up some inconsistent indenting
There are bunch of statements where the indentation is not correct,
clean these up.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210902224758.57600-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:22:18 +02:00
Chris Wilson
13be2efc39 rtc: cmos: Disable irq around direct invocation of cmos_interrupt()
As previously noted in commit 66e4f4a9cc ("rtc: cmos: Use
spin_lock_irqsave() in cmos_interrupt()"):

<4>[  254.192378] WARNING: inconsistent lock state
<4>[  254.192384] 5.12.0-rc1-CI-CI_DRM_9834+ #1 Not tainted
<4>[  254.192396] --------------------------------
<4>[  254.192400] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
<4>[  254.192409] rtcwake/5309 [HC0[0]:SC0[0]:HE1:SE1] takes:
<4>[  254.192429] ffffffff8263c5f8 (rtc_lock){?...}-{2:2}, at: cmos_interrupt+0x18/0x100
<4>[  254.192481] {IN-HARDIRQ-W} state was registered at:
<4>[  254.192488]   lock_acquire+0xd1/0x3d0
<4>[  254.192504]   _raw_spin_lock+0x2a/0x40
<4>[  254.192519]   cmos_interrupt+0x18/0x100
<4>[  254.192536]   rtc_handler+0x1f/0xc0
<4>[  254.192553]   acpi_ev_fixed_event_detect+0x109/0x13c
<4>[  254.192574]   acpi_ev_sci_xrupt_handler+0xb/0x28
<4>[  254.192596]   acpi_irq+0x13/0x30
<4>[  254.192620]   __handle_irq_event_percpu+0x43/0x2c0
<4>[  254.192641]   handle_irq_event_percpu+0x2b/0x70
<4>[  254.192661]   handle_irq_event+0x2f/0x50
<4>[  254.192680]   handle_fasteoi_irq+0x9e/0x150
<4>[  254.192693]   __common_interrupt+0x76/0x140
<4>[  254.192715]   common_interrupt+0x96/0xc0
<4>[  254.192732]   asm_common_interrupt+0x1e/0x40
<4>[  254.192750]   _raw_spin_unlock_irqrestore+0x38/0x60
<4>[  254.192767]   resume_irqs+0xba/0xf0
<4>[  254.192786]   dpm_resume_noirq+0x245/0x3d0
<4>[  254.192811]   suspend_devices_and_enter+0x230/0xaa0
<4>[  254.192835]   pm_suspend.cold.8+0x301/0x34a
<4>[  254.192859]   state_store+0x7b/0xe0
<4>[  254.192879]   kernfs_fop_write_iter+0x11d/0x1c0
<4>[  254.192899]   new_sync_write+0x11d/0x1b0
<4>[  254.192916]   vfs_write+0x265/0x390
<4>[  254.192933]   ksys_write+0x5a/0xd0
<4>[  254.192949]   do_syscall_64+0x33/0x80
<4>[  254.192965]   entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[  254.192986] irq event stamp: 43775
<4>[  254.192994] hardirqs last  enabled at (43775): [<ffffffff81c00c42>] asm_sysvec_apic_timer_interrupt+0x12/0x20
<4>[  254.193023] hardirqs last disabled at (43774): [<ffffffff81aa691a>] sysvec_apic_timer_interrupt+0xa/0xb0
<4>[  254.193049] softirqs last  enabled at (42548): [<ffffffff81e00342>] __do_softirq+0x342/0x48e
<4>[  254.193074] softirqs last disabled at (42543): [<ffffffff810b45fd>] irq_exit_rcu+0xad/0xd0
<4>[  254.193101]
                  other info that might help us debug this:
<4>[  254.193107]  Possible unsafe locking scenario:

<4>[  254.193112]        CPU0
<4>[  254.193117]        ----
<4>[  254.193121]   lock(rtc_lock);
<4>[  254.193137]   <Interrupt>
<4>[  254.193142]     lock(rtc_lock);
<4>[  254.193156]
                   *** DEADLOCK ***

<4>[  254.193161] 6 locks held by rtcwake/5309:
<4>[  254.193174]  #0: ffff888104861430 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x5a/0xd0
<4>[  254.193232]  #1: ffff88810f823288 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xe7/0x1c0
<4>[  254.193282]  #2: ffff888100cef3c0 (kn->active#285
<7>[  254.192706] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled
<4>[  254.193307] ){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xf0/0x1c0
<4>[  254.193333]  #3: ffffffff82649fa8 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend.cold.8+0xce/0x34a
<4>[  254.193387]  #4: ffffffff827a2108 (acpi_scan_lock){+.+.}-{3:3}, at: acpi_suspend_begin+0x47/0x70
<4>[  254.193433]  #5: ffff8881019ea178 (&dev->mutex){....}-{3:3}, at: device_resume+0x68/0x1e0
<4>[  254.193485]
                  stack backtrace:
<4>[  254.193492] CPU: 1 PID: 5309 Comm: rtcwake Not tainted 5.12.0-rc1-CI-CI_DRM_9834+ #1
<4>[  254.193514] Hardware name: Google Soraka/Soraka, BIOS MrChromebox-4.10 08/25/2019
<4>[  254.193524] Call Trace:
<4>[  254.193536]  dump_stack+0x7f/0xad
<4>[  254.193567]  mark_lock.part.47+0x8ca/0xce0
<4>[  254.193604]  __lock_acquire+0x39b/0x2590
<4>[  254.193626]  ? asm_sysvec_apic_timer_interrupt+0x12/0x20
<4>[  254.193660]  lock_acquire+0xd1/0x3d0
<4>[  254.193677]  ? cmos_interrupt+0x18/0x100
<4>[  254.193716]  _raw_spin_lock+0x2a/0x40
<4>[  254.193735]  ? cmos_interrupt+0x18/0x100
<4>[  254.193758]  cmos_interrupt+0x18/0x100
<4>[  254.193785]  cmos_resume+0x2ac/0x2d0
<4>[  254.193813]  ? acpi_pm_set_device_wakeup+0x1f/0x110
<4>[  254.193842]  ? pnp_bus_suspend+0x10/0x10
<4>[  254.193864]  pnp_bus_resume+0x5e/0x90
<4>[  254.193885]  dpm_run_callback+0x5f/0x240
<4>[  254.193914]  device_resume+0xb2/0x1e0
<4>[  254.193942]  ? pm_dev_err+0x25/0x25
<4>[  254.193974]  dpm_resume+0xea/0x3f0
<4>[  254.194005]  dpm_resume_end+0x8/0x10
<4>[  254.194030]  suspend_devices_and_enter+0x29b/0xaa0
<4>[  254.194066]  pm_suspend.cold.8+0x301/0x34a
<4>[  254.194094]  state_store+0x7b/0xe0
<4>[  254.194124]  kernfs_fop_write_iter+0x11d/0x1c0
<4>[  254.194151]  new_sync_write+0x11d/0x1b0
<4>[  254.194183]  vfs_write+0x265/0x390
<4>[  254.194207]  ksys_write+0x5a/0xd0
<4>[  254.194232]  do_syscall_64+0x33/0x80
<4>[  254.194251]  entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[  254.194274] RIP: 0033:0x7f07d79691e7
<4>[  254.194293] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
<4>[  254.194312] RSP: 002b:00007ffd9cc2c768 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
<4>[  254.194337] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f07d79691e7
<4>[  254.194352] RDX: 0000000000000004 RSI: 0000556ebfc63590 RDI: 000000000000000b
<4>[  254.194366] RBP: 0000556ebfc63590 R08: 0000000000000000 R09: 0000000000000004
<4>[  254.194379] R10: 0000556ebf0ec2a6 R11: 0000000000000246 R12: 0000000000000004

which breaks S3-resume on fi-kbl-soraka presumably as that's slow enough
to trigger the alarm during the suspend.

Fixes: 6950d046eb ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ")
References: 66e4f4a9cc ("rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()"):
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Xiaofei Tan <tanxiaofei@huawei.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210305122140.28774-1-chris@chris-wilson.co.uk
2021-09-14 10:20:19 +02:00
Kathiravan T
9da2c3f761 arm64: qcom: ipq6018: add usb3 DT description
Based on downstream codeaurora code.

Tested (USB2 only) on IPQ6010 based hardware.

Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/ebc2d340d566fa2d43127e253d5b8b134a87a78e.1630389452.git.baruch@tkos.co.il
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:15:55 +02:00
Baruch Siach
1880f9b2b9 dt-bindings: usb: qcom,dwc3: add binding for IPQ6018
Add compatible string for Qualcomm IPQ6018 SoC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/6a9b00d16a707aa2a94bcba71a24932cc201a473.1630389452.git.baruch@tkos.co.il
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:15:55 +02:00
Balaji Prakash J
7bee318838 usb: dwc3: reference clock period configuration
Set reference clock period when it differs from dwc3 default hardware
set.

We could calculate clock period based on reference clock frequency. But
this information is not always available. This is the case of PCI bus
attached USB host. For that reason we use a custom property.

Tested (USB2 only) on IPQ6010 SoC based board with 24 MHz reference
clock while hardware default is 19.2 MHz.

[ baruch: rewrite commit message; drop GFLADJ code; remove 'quirk-' from
  property name; mention tested hardware ]

Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Balaji Prakash J <bjagadee@codeaurora.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Nacked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/9f399bdf1ff752e31ab7497e3d5ce19bbb3ff247.1630389452.git.baruch@tkos.co.il
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:15:55 +02:00
Baruch Siach
7ea606e8f2 dt-bindings: usb: dwc3: add reference clock period
Document the snps,ref-clock-period-ns property that describes reference
clock period when it deviates from the default set value.

Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/f5ea5bc3664a98a684ad4b699a1ac610e847176f.1630389452.git.baruch@tkos.co.il
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:15:55 +02:00
Len Baker
6943ee7c9d usb: ohci: Prefer struct_size over open coded arithmetic
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kzalloc() function.

[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210911112631.10004-1-len.baker@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:13:59 +02:00
Philipp Zabel
9c172d4cdf usb: typec: hd3ss3220: Use regmap_write_bits()
Use the regmap_write_bits() macro instead of regmap_update_bits_base().
No functional change.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20210907092706.31748-1-p.zabel@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:12:06 +02:00
Pali Rohár
74e1eb3b4a serial: mvebu-uart: fix driver's tx_empty callback
Driver's tx_empty callback should signal when the transmit shift register
is empty. So when the last character has been sent.

STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which
happens when the last byte is loaded into transmit shift register.

STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift
register are empty.

So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty()
callback function.

Fixes: 30530791a7 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:07:10 +02:00
Nishanth Menon
79e9e30a92 serial: 8250: 8250_omap: Fix RX_LVL register offset
Commit b67e830d38 ("serial: 8250: 8250_omap: Fix possible interrupt
storm on K3 SoCs") introduced fixup including a register read to
RX_LVL, however, we should be using word offset than byte offset
since our registers are on 4 byte boundary (port.regshift = 2) for
8250_omap.

Fixes: b67e830d38 ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs")
Cc: stable <stable@vger.kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210903050550.29050-1-nm@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:06:37 +02:00
Sean Anderson
ea017f5853 tty: serial: uartlite: Prevent changing fixed parameters
This device does not support changing baud, parity, data bits, stop
bits, or detecting breaks. Disable "changing" these settings to prevent
their termios from diverging from the actual state of the uart.

In order to determine the correct parameters to enforce, we read the
various new devicetree parameters to discover how the uart was
configured when it was synthesized. The defaults match
ulite_console_setup. xlnx,use-parity, xlnx,odd-parity, and
xlnx,data-bits are optional since there were in-tree users (and
presumably out-of-tree users) who did not set them.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20210826192154.3202269-5-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:05:32 +02:00
Sean Anderson
8517b62e0a sh: j2: Update uartlite binding with data and parity properties
These properties are necessary for properly calculating the uart
timeout. I inspected the J2 source code, and believe these values to be
correct.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20210826192154.3202269-4-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:05:32 +02:00
Sean Anderson
3de536a8c3 dt-bindings: serial: uartlite: Add properties for synthesis-time parameters
The uartlite device is a "soft" device. Many parameters, such as baud
rate, data bits, and the presence of a parity bit are configured before
synthesis and may not be changed (or discovered) at runtime. However, we
must know what these settings are in order to properly calculate the
uart timeout (and to inform the user about the actual baud of the uart).

These properties are present for out-of-tree bindings generated by
Xilinx's tools. However, they are also (mostly) present in in-tree
bindings. I chose current-speed over xlnx,baudrate primarily because it
seemed to be used by more existing bindings. Although these properties
are marked as "required", note that only current-speed is required by
the driver itself. Hopefully, this will allow for an easier transition.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20210826192154.3202269-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:05:32 +02:00
Sean Anderson
f77529d9b9 dt-bindings: serial: uartlite: Convert to json-schema
This converts the existing documentation for the uartlite binding to
json-schema.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20210826192154.3202269-2-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:05:32 +02:00
Sam Protsenko
538a990920 dt-bindings: serial: samsung: Add Exynos850 doc
Add compatible string for Exynos850 SoC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20210811114827.27322-4-semen.protsenko@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:02:37 +02:00
Len Baker
42c457cc9a serial: 8250_pci: Prefer struct_size over open coded arithmetic
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the struct_size() helper to do the arithmetic instead of the
argument "size + size * count" in the kzalloc() function.

[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210905155728.11147-1-len.baker@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:00:51 +02:00
Rafał Miłecki
0f3b577384 dt-bindings: serial: brcm,bcm6345-uart: convert to the json-schema
This helps validating DTS files.

Redundant generic descriptions (e.g. "The base address of the UART
register bank") were dropped and periph_clk was dropped from example as
not required.

Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20210829131927.13682-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:00:21 +02:00
Vinay Belgaumkar
00598d5c69 drm/i915: Get PM ref before accessing HW register
Seeing these errors when GT is likely in suspend state-
"RPM wakelock ref not held during HW access"

Ensure GT is awake before trying to access HW registers. Avoid
reading the register if that is not the case.

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Fixes: 41e5c17ebf ("drm/i915/guc/slpc: Sysfs hooks for SLPC")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907232704.12982-1-vinay.belgaumkar@intel.com
(cherry picked from commit f25e3908b9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14 10:57:14 +03:00
Daniel Vetter
031536665f drm/i915: Release ctx->syncobj on final put, not on ctx close
gem context refcounting is another exercise in least locking design it
seems, where most things get destroyed upon context closure (which can
race with anything really). Only the actual memory allocation and the
locks survive while holding a reference.

This tripped up Jason when reimplementing the single timeline feature
in

commit 00dae4d3d3
Author: Jason Ekstrand <jason@jlekstrand.net>
Date:   Thu Jul 8 10:48:12 2021 -0500

    drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)

We could fix the bug by holding ctx->mutex in execbuf and clear the
pointer (again while holding the mutex) context_close, but it's
cleaner to just make the context object actually invariant over its
_entire_ lifetime. This way any other ioctl that's potentially racing,
but holding a full reference, can still rely on ctx->syncobj being
an immutable pointer. Which without this change, is not the case.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: 00dae4d3d3 ("drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)")
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-2-daniel.vetter@ffwll.ch
(cherry picked from commit c238980efd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14 10:57:02 +03:00
Thomas Hellström
04a3ab6acd drm/i915/gem: Fix the mman selftest
Using the I915_MMAP_TYPE_FIXED mmap type requires the TTM backend, so
for that mmap type, use __i915_gem_object_create_user() instead of
i915_gem_object_create_internal(), as we really want to tests objects
mmap-able by user-space.

This also means that the out-of-space error happens at object creation
and returns -ENXIO rather than -ENOSPC, so fix the code up to expect
that on out-of-offset-space errors.

Finally only use I915_MMAP_TYPE_FIXED for LMEM and SMEM for now if
testing on LMEM-capable devices. For stolen LMEM, we still take the
same path as for integrated, as that haven't been moved over to TTM yet,
and user-space should not be able to create out of stolen LMEM anyway.

v2:
 - Check the presence of the obj->ops->mmap_offset callback rather than
   hardcoding the supported mmap regions in can_mmap() (Maarten Lankhorst)

Fixes: 7961c5b60f ("drm/i915: Add TTM offset argument to mmap.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831122931.157536-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 450cede7f3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14 10:56:56 +03:00
Daniele Ceraolo Spurio
415406380c drm/i915/guc: drop guc_communication_enabled
The function is only used from within GEM_BUG_ON(), which is causing
warnings with Wunneeded-internal-declaration in some builds. Since the
function is a simple wrapper around a CT function, we can just call the
CT function directly instead.

Fixes: 1fb12c5871 ("drm/i915/guc: skip disabling CTBs before sanitizing the GuC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210823163137.19770-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 5db1856781)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14 10:56:49 +03:00
Kai-Heng Feng
c8dead5751 drm/i915/dp: Use max params for panels < eDP 1.4
Users reported that after commit 2bbd6dba84 ("drm/i915: Try to use
fast+narrow link on eDP again and fall back to the old max strategy on
failure"), the screen starts to have wobbly effect.

Commit a5c936add6 ("drm/i915/dp: Use slow and wide link training for
everything") doesn't help either, that means the affected eDP 1.2 panels
only work with max params.

So use max params for panels < eDP 1.4 as Windows does to solve the
issue.

v3:
 - Do the eDP rev check in intel_edp_init_dpcd()

v2:
 - Check eDP 1.4 instead of DPCD 1.1 to apply max params

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3714
Fixes: 2bbd6dba84 ("drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure")
Fixes: a5c936add6 ("drm/i915/dp: Use slow and wide link training for everything")
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820075301.693099-1-kai.heng.feng@canonical.com
(cherry picked from commit d7f213c131)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14 10:56:40 +03:00