Seeing these errors when GT is likely in suspend state-
"RPM wakelock ref not held during HW access"
Ensure GT is awake before trying to access HW registers. Avoid
reading the register if that is not the case.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Fixes: 41e5c17ebf ("drm/i915/guc/slpc: Sysfs hooks for SLPC")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907232704.12982-1-vinay.belgaumkar@intel.com
- Prevent a message about missing PRMT from being printed on systems
that do not support PRM, which are the majority now (Aubrey Li).
- Drop unnecessary header include from scan.c (Kari Argillander).
- Update the list of ACPICA maintainers after recent departure of
one of them (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmE7qKISHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxA98P/2lFdmZb/Wv7jVd97DTDgE09k9G9T8EX
e0dt4ZFwh8U0yNnxGuskDMAp8W5QP4rd6dZrD3ici3ebR63zzuUg8vdlY3yS2pXT
15qxTca5505ffKp+LTaKIC7fGC3SolSEF8BAG6vKcLc8A0JDNZcuAALYWBsUzB36
FAYKp4b/jnmNSsocHl9Uatwo5sJU2gy2aLIu8V1e07WHgS3ywljBhBrQSIDOGyZG
8vQqWALUviGU1jSM0JYIuBPPZPSLIhc0Y3jp/9GNZDcT3St9IQktjQckBIjxemd8
UQJrk+Y7ZkgtDzcDPIZOB3oyOvYsPiMz+VkLLzA9kzNqS/UOa1p9rNBt/UBIaSug
rB5P+iU6Ub9tYpS/E6r2T49vov4H5rgHsF+0kG/9UwZFSYSYHiIzH/ellPDQAv4h
rNxUs2NFz+V4fsj913A06+/T7bBKO7E24fLmQCCfuJknUPIwPwoM60nk7oMKKNeV
j/rMyr4BoCA51JOnynjrrBfZkKgHoMKPfLuU18Rcmgz2OCpSzN2f+njROMIm3jmn
LwgnpJOJmCs0cuPPNMkuz7ETlvk1fiVbCS1iZNkUlC8B5V358p1uJAGWZSdcx+D/
jYK9qPT652/Xc29xxgV0asaDVd8odR6YxDMqT9RsI34KIXTghZDS7qSBeeVwhUi5
QWqGWlAZsNH0
=CmpE
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These prevent a confusing PRMT-related message from being printed,
drop an unnecessary header file include and update the list of ACPICA
maintainers.
Specifics:
- Prevent a message about missing PRMT from being printed on systems
that do not support PRM, which are the majority now (Aubrey Li).
- Drop unnecessary header include from scan.c (Kari Argillander).
- Update the list of ACPICA maintainers after recent departure of one
of them (Rafael Wysocki)"
* tag 'acpi-5.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Update the list of maintainers
ACPI: PRM: Find PRMT table before parsing it
ACPI: scan: Remove unneeded header linux/nls.h
As best I can tell, the logic for these has been broken for a long time
(at least before the move to git), such that they never conflict with
anything. Also, nothing checks for these flags and prevented opens or
read/write behavior on the files. They don't seem to do anything.
Given that, we can rip these symbols out of the kernel, and just make
flock(2) return 0 when LOCK_MAND is set in order to preserve existing
behavior.
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
- Make the HWP performance levels calibration on hybrid processors
in intel_pstate more straightforward (Rafael Wysocki).
- Prevent the PM core from leaving devices in suspend after a
failing system-wide suspend transition in some cases when driver
PM flags are used (Prasad Sodagudi).
- Drop unused function argument from the dedicated wake IRQs
handling code (Sergey Shtylyov).
- Fix up Energy Model kerneldoc comments and include them in the
Energy Model documentation (Lukasz Luba).
- Use my kernel.org address in MAINTAINERS insead of the personal
one (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=lVfk
-----END PGP SIGNATURE-----
Merge tag 'pm-5.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These improve hybrid processors support in intel_pstate, fix an issue
in the core devices PM code, clean up the handling of dedicated wake
IRQs, update the Energy Model documentation and update MAINTAINERS.
Specifics:
- Make the HWP performance levels calibration on hybrid processors in
intel_pstate more straightforward (Rafael Wysocki).
- Prevent the PM core from leaving devices in suspend after a failing
system-wide suspend transition in some cases when driver PM flags
are used (Prasad Sodagudi).
- Drop unused function argument from the dedicated wake IRQs handling
code (Sergey Shtylyov).
- Fix up Energy Model kerneldoc comments and include them in the
Energy Model documentation (Lukasz Luba).
- Use my kernel.org address in MAINTAINERS insead of the personal one
(Rafael Wysocki)"
* tag 'pm-5.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
MAINTAINERS: Change Rafael's e-mail address
PM: sleep: core: Avoid setting power.must_resume to false
Documentation: power: include kernel-doc in Energy Model doc
PM: EM: fix kernel-doc comments
cpufreq: intel_pstate: hybrid: Rework HWP calibration
ACPI: CPPC: Introduce cppc_get_nominal_perf()
PM: sleep: wakeirq: drop useless parameter from dev_pm_attach_wake_irq()
'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum'
is more concise and yields better error messages.
Fix a couple more cases which have appeared.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Mark Brown <broonie@kernel.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Aswath Govindraju <a-govindraju@ti.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210910165153.2843871-1-robh@kernel.org
Magnus Karlsson says:
====================
This patch set facilitates adding new tests as well as describing
existing ones in the xsk selftests suite and adds 3 new test suites at
the end. The idea is to isolate the run-time that executes the test
from the actual implementation of the test. Today, implementing a test
amounts to adding test specific if-statements all around the run-time,
which is not scalable or amenable for reuse. This patch set instead
introduces a test specification that is the only thing that a test
fills in. The run-time then gets this specification and acts upon it
completely unaware of what test it is executing. This way, we can get
rid of all test specific if-statements from the run-time and the
implementation of the test can be contained in a single function. This
hopefully makes it easier to add tests and for users to understand
what the test accomplishes.
As a recap of what the run-time does: each test is based on the
run-time launching two threads and connecting a veth link between the
two threads. Each thread opens an AF_XDP socket on that veth interface
and one of them sends traffic that the other one receives and
validates. Each thread has its own umem. Note that this behavior is
not changed by this patch set.
A test specification consists of several items. Most importantly:
* Two packet streams. One for Tx thread that specifies what traffic to
send and one for the Rx thread that specifies what that thread
should receive. If it receives exactly what is specified, the test
passes, otherwise it fails. A packet stream can also specify what
buffers in the umem that should be used by the Rx and Tx threads.
* What kind of AF_XDP sockets it should create and bind to what
interfaces
* How many times it should repeat the socket creation and destruction
* The name of the test
The interface for the test spec is the following:
void test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx,
struct ifobject *ifobj_rx, enum test_mode mode);
/* Reset everything but the interface specifications and the mode */
void test_spec_reset(struct test_spec *test);
void test_spec_set_name(struct test_spec *test, const char *name);
Packet streams have the following interfaces:
struct pkt *pkt_stream_get_pkt(struct pkt_stream *pkt_stream, u32 pkt_nb)
struct pkt *pkt_stream_get_next_rx_pkt(struct pkt_stream *pkt_stream)
struct pkt_stream *pkt_stream_generate(struct xsk_umem_info *umem,
u32 nb_pkts, u32 pkt_len);
void pkt_stream_delete(struct pkt_stream *pkt_stream);
struct pkt_stream *pkt_stream_clone(struct xsk_umem_info *umem,
struct pkt_stream *pkt_stream);
/* Replaces all packets in the stream*/
void pkt_stream_replace(struct test_spec *test, u32 nb_pkts, u32 pkt_len);
/* Replaces every other packet in the stream */
void pkt_stream_replace_half(struct test_spec *test, u32 pkt_len, u32 offset);
/* For creating custom made packet streams */
void pkt_stream_generate_custom(struct test_spec *test, struct pkt *pkts,
u32 nb_pkts);
/* Restores the default packet stream */
void pkt_stream_restore_default(struct test_spec *test);
A test can then then in the most basic case described like this
(provided the test specification has been created before calling the
function):
static bool testapp_aligned(struct test_spec *test)
{
test_spec_set_name(test, "RUN_TO_COMPLETION");
testapp_validate_traffic(test);
}
Running the same test in unaligned mode would then look like this:
static bool testapp_unaligned(struct test_spec *test)
{
if (!hugepages_present(test->ifobj_tx)) {
ksft_test_result_skip("No 2M huge pages present.\n");
return false;
}
test_spec_set_name(test, "UNALIGNED_MODE");
test->ifobj_tx->umem->unaligned_mode = true;
test->ifobj_rx->umem->unaligned_mode = true;
/* Let half of the packets straddle a buffer boundrary */
pkt_stream_replace_half(test, PKT_SIZE,
XSK_UMEM__DEFAULT_FRAME_SIZE - 32);
/* Populate fill ring with addresses in the packet stream */
test->ifobj_rx->pkt_stream->use_addr_for_fill = true;
testapp_validate_traffic(test);
pkt_stream_restore_default(test);
return true;
}
3 of the last 4 patches in the set add 3 new test suites, one for
unaligned mode, one for testing the rejection of tricky invalid
descriptors plus the acceptance of some valid ones in the Tx ring, and
one for testing 2K frame sizes (the default is 4K).
What is left to do for follow-up patches:
* Convert the statistics tests to the new framework.
* Implement a way of registering new tests without having the enum
test_type. Once this has been done (together with the previous
bullet), all the test types can be dropped from the header
file. This means that we should be able to add tests by just writing
a single function with a new test specification, which is one of the
goals.
* Introduce functions for manipulating parts of the test or interface
spec instead of direct manipulations such as
test->ifobj_rx->pkt_stream->use_addr_for_fill = true; which is kind
of awkward.
* Move the run-time and its interface to its own .c and .h files. Then
we can have all the tests in a separate file.
* Better error reporting if a test fails. Today it does not state what
test fails and might not continue execute the rest of the tests due
to this failure. Failures are not propagated upwards through the
functions so a failed test will also be a passed test, which messes
up the stats counting. This needs to be changed.
* Add option to run specific test instead of all of them
* Introduce pacing of sent packets so that they are never dropped
by the receiver even if it is stalled for some reason. If you run
the current tests on a heavily loaded system, they might fail in SKB
mode due to packets being dropped by the driver on Tx. Though I have
never seen it, it might happen.
v1 -> v2:
* Fixed a number of spelling errors [Maciej]
* Fixed use after free bug in pkt_stream_replace() [Maciej]
* pkt_stream_set -> pkt_stream_generate_custom [Maciej]
* Fixed formatting problem in testapp_invalid_desc() [Maciej]
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add tests for 2K frame size. Both a standard send and receive test and
one testing for invalid descriptors when the frame size is 2K.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-21-magnus.karlsson@gmail.com
Add tests for invalid xsk descriptors in the Tx ring. A number of
handcrafted nasty invalid descriptors are created and submitted to the
tx ring to check that they are validated correctly. Corner case valid
ones are also sent. The tests are run for both aligned and unaligned
mode.
pkt_stream_set() is introduced to be able to create a hand-crafted
packet stream where every single packet is specified in detail.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-20-magnus.karlsson@gmail.com
Eliminate a test specific if-statement for the RX_FILL_EMTPY stats
test that is present in the test runner. We can do this as we now have
the use_addr_for_fill option. Just create and empty Rx packet stream
and indicated that the test runner should use the addresses in that to
populate the fill ring. As there are no packets in the stream, the
fill ring will be empty and we will get the error stats that we want
to test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-19-magnus.karlsson@gmail.com
Add a test for unaligned mode in which packet buffers can be placed
anywhere within the umem. Some packets are made to straddle page
boundaries in order to check for correctness. On the Tx side, buffers
are now allocated according to the addresses found in the packet
stream. Thus, the placement of buffers can be controlled with the
boolean use_addr_for_fill in the packet stream.
One new pkt_stream interface is introduced: pkt_stream_replace_half()
that replaces every other packet in the default packet stream with the
specified new packet. The constant DEFAULT_OFFSET is also
introduced. It specifies at what offset from the start of a chunk a Tx
packet is placed by the sending thread. This is just to be able to
test that it is possible to send packets at an offset not equal to
zero.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-18-magnus.karlsson@gmail.com
Introduce the concept of a default packet stream that is the set of
packets sent by most tests. Then add the ability to replace it for a
test that would like to send or receive something else through the use
of the function pkt_stream_replace() and then restored with
pkt_stream_restore_default(). These are then used to convert the
STAT_TEST_TX_INVALID to use these new APIs.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-17-magnus.karlsson@gmail.com
Allow for invalid packets to be sent. These are verified by the Rx
thread not to be received. Or put in another way, if they are
received, the test will fail. This feature will be used to eliminate
an if statement for a stats test and will also be used by other tests
in later patches. The previous code could only deal with valid
packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-16-magnus.karlsson@gmail.com
Remove the MAX_SOCKS define as it always will be one for the forseable
future and the code does not work for any other case anyway.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-15-magnus.karlsson@gmail.com
Make the pthread_t variables local scope instead of global. No reason
for them to be global.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-14-magnus.karlsson@gmail.com
Make xdp_flags and bind_flags local instead of global by moving them
into the interface object. These flags decide if the socket should be
created in SKB mode or in DRV mode and therefore they are sticky and
will survive a test_spec_reset. Since every test is first run in SKB
mode then in DRV mode, this change only happens once. With this
change, the configured_mode global variable can also be
erradicated. The first test_spec_init() also becomes superfluous and
can be eliminated.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-13-magnus.karlsson@gmail.com
Add the ability in the test specification to specify numbers of
sockets to create. The default is one socket. This is then used to
remove test specific if-statements around the bpf_res tests.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-12-magnus.karlsson@gmail.com
Replace the second_step global variable with a test specification
variable called total_steps that a test can be set to indicate how
many times the packet stream should be sent without reinitializing any
sockets. This eliminates test specific code in the test runner around
the bidirectional test.
The total_steps variable is 1 by default as most tests only need a
single round of packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-11-magnus.karlsson@gmail.com
Introduce rx_on and tx_on in the ifobject so that we can describe if
the thread should create a socket with only tx, rx, or both. This
eliminates some test specific if statements from the code. We can also
eliminate the flow vector structure now as this is fully specified
by the tx_on and rx_on variables.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-10-magnus.karlsson@gmail.com
Add a use_poll option to the ifobject so that we do not need to use a
test specific if-statement in the test runner.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-9-magnus.karlsson@gmail.com
Introduce the test name in the test specification. This so we can set
the name locally in the test function and simplify the logic for
printing out test results.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-8-magnus.karlsson@gmail.com
Make the frame size configurable instead of it being hard coded to a
default. This is a property of the umem and will make it possible to
implement tests for different umem frame sizes in a later patch.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-7-magnus.karlsson@gmail.com
Move the global variable rxqsize to struct xsk_socket_info as it
describes the size of a ring in that struct. By default, it is set to
the size dictated by libbpf.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-6-magnus.karlsson@gmail.com
Move the global variables num_frames and frame_headroom to struct
xsk_umem_info. They describe properties of the umem so no reason for
them to be global.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-5-magnus.karlsson@gmail.com
Introduce a test specification to be able to concisely describe a
test. Currently, a test is implemented by sprinkling test specific if
statements here and there, which is not scalable or easy to
understand. The end goal with this patch set is to come to the point
in which a test is completely specified by a test specification that
can easily be constructed in a single function so that new tests can
be added without too much trouble. This test specification will be run
by a test runner that has no idea about tests. It just executes the
what test specification states.
This patch introduces the test specification and, as a start, puts the
two interface objects in there, one containing the packet stream to be
sent and the other one the packet stream that is supposed to be
received for a test to pass. The global variables containing these can
then be eliminated. The following patches will convert each existing
test into a test specification and add the needed fields into it and
the functionality in the test runner that act on the test
specification. At the end, the test runner should contain no test
specific code and each test should be described in a single simple
function.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-4-magnus.karlsson@gmail.com
Introduce a typedef of the thread function so this can be passed to
init_iface() in order to simplify that function.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-3-magnus.karlsson@gmail.com
Simplify the xsk_info and umem_info allocation by allocating them
upfront in an array, instead of allocating an array of pointers to
future creations of these. Allocating them upfront also has the
advantage that configuration information can be stored in these
structures instead of relying on global variables. With the previous
structure, xsk_info and umem_info were created too late to be able to
store most configuration information. This will be used to eliminate
most global variables in later patches in this series.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-2-magnus.karlsson@gmail.com
- Limit the linear region to 51-bit when KVM is running in nVHE mode
otherwise, depending on the placement of the ID map, kernel-VA to
hyp-VA translations may produce addresses that either conflict with
other HYP mappings or generate addresses outside of the 52-bit
addressable range.
- Instruct kmemleak not to scan the memory reserved for kdump as this
range is removed from the kernel linear map and therefore not
accessible.
-----BEGIN PGP SIGNATURE-----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=7RDb
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Limit the linear region to 51-bit when KVM is running in nVHE mode.
Otherwise, depending on the placement of the ID map, kernel-VA to
hyp-VA translations may produce addresses that either conflict with
other HYP mappings or generate addresses outside of the 52-bit
addressable range.
- Instruct kmemleak not to scan the memory reserved for kdump as this
range is removed from the kernel linear map and therefore not
accessible.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kdump: Skip kmemleak scan reserved memory for kdump
arm64: mm: limit linear region to 51 bits for KVM in nVHE mode
* Build warning fixes in Makefile and Dino PCI driver
* Fix when sched_clock is marked unstable
* Drop strnlen_user() in favour of generic version
* Prevent kernel to write outside userspace signal stack
* Remove CONFIG_SET_FS incl. KERNEL_DS and USER_DS from parisc and switch to
__get/put_kernel_nofault()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYTsgrwAKCRD3ErUQojoP
X+MNAP0Q3XAta0ySRrEiuuZKACD5lJgFwEglvrHW5MWKA2qTdwD/cJ2hYLb4jMSf
ezMaiGvyFAOUf4Krk6Gopbp38wHHGw0=
=j26N
-----END PGP SIGNATURE-----
Merge tag 'for-5.15/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Build warning fixes in Makefile and Dino PCI driver
- Fix when sched_clock is marked unstable
- Drop strnlen_user() in favour of generic version
- Prevent kernel to write outside userspace signal stack
- Remove CONFIG_SET_FS including KERNEL_DS and USER_DS from parisc and
switch to __get/put_kernel_nofault()
* tag 'for-5.15/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Implement __get/put_kernel_nofault()
parisc: Mark sched_clock unstable only if clocks are not syncronized
parisc: Move pci_dev_is_behind_card_dino to where it is used
parisc: Reduce sigreturn trampoline to 3 instructions
parisc: Check user signal stack trampoline is inside TASK_SIZE
parisc: Drop useless debug info and comments from signal.c
parisc: Drop strnlen_user() in favour of generic version
parisc: Add missing FORCE prerequisite in Makefile
Including:
- Intel VT-d:
- PASID leakage in intel_svm_unbind_mm();
- Deadlock in intel_svm_drain_prq().
- AMD IOMMU: Fixes for an unhandled page-fault bug when AVIC is used
for a KVM guest.
- Make CONFIG_IOMMU_DEFAULT_DMA_LAZY architecture instead of IOMMU
driver dependent
-----BEGIN PGP SIGNATURE-----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=/POW
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d:
- PASID leakage in intel_svm_unbind_mm()
- Deadlock in intel_svm_drain_prq()
- AMD IOMMU: Fixes for an unhandled page-fault bug when AVIC is used
for a KVM guest.
- Make CONFIG_IOMMU_DEFAULT_DMA_LAZY architecture instead of IOMMU
driver dependent
* tag 'iommu-fixes-v5.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Clarify default domain Kconfig
iommu/vt-d: Fix a deadlock in intel_svm_drain_prq()
iommu/vt-d: Fix PASID leak in intel_svm_unbind_mm()
iommu/amd: Remove iommu_init_ga()
iommu/amd: Relocate GAMSup check to early_enable_iommus
Here is a second round of misc driver patches for 5.15-rc1.
In here is only updates for the Habanalabs driver. This request is late
because the previously-objected-to dma-buf patches are all removed and
some fixes that you and others found are now included in here as well.
All of these have been in linux-next for well over a week with no
reports of problems, and they are all self-contained to only this one
driver. Full details are in the shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYTtnnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldxgCfeXoRaaCBSzpbejgf48CQRd/m/v0AmgMRVUxB
kJ58eqBrDMdeExOkvkh8
=6d/9
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull habanalabs updates from Greg KH:
"Here is another round of misc driver patches for 5.15-rc1.
In here is only updates for the Habanalabs driver. This request is
late because the previously-objected-to dma-buf patches are all
removed and some fixes that you and others found are now included in
here as well.
All of these have been in linux-next for well over a week with no
reports of problems, and they are all self-contained to only this one
driver. Full details are in the shortlog"
* tag 'char-misc-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (61 commits)
habanalabs/gaudi: hwmon default card name
habanalabs: add support for f/w reset
habanalabs/gaudi: block ICACHE_BASE_ADDERESS_HIGH in TPC
habanalabs: cannot sleep while holding spinlock
habanalabs: never copy_from_user inside spinlock
habanalabs: remove unnecessary device status check
habanalabs: disable IRQ in user interrupts spinlock
habanalabs: add "in device creation" status
habanalabs/gaudi: invalidate PMMU mem cache on init
habanalabs/gaudi: size should be printed in decimal
habanalabs/gaudi: define DC POWER for secured PMC
habanalabs/gaudi: unmask out of bounds SLM access interrupt
habanalabs: add userptr_lookup node in debugfs
habanalabs/gaudi: fetch TPC/MME ECC errors from F/W
habanalabs: modify multi-CS to wait on stream masters
habanalabs/gaudi: add monitored SOBs to state dump
habanalabs/gaudi: restore user registers when context opens
habanalabs/gaudi: increase boot fit timeout
habanalabs: update to latest firmware headers
habanalabs/gaudi: minimize number of register reads
...
ttm:
- Fix ttm_bo_move_memcpy() when ttm_resource is subclassed.
- Fix ttm deadlock if target BO isn't idle
- ttm build fix
- ttm docs fix
dma-buf:
- config option fixes
fbdev:
- limit resolutions to avoid int overflow
i915:
- stddef change.
amdgpu:
- Misc cleanups, typo fixes
- EEPROM fix
- Add some new PCI IDs
- Scatter/Gather display support for Yellow Carp
- PCIe DPM fix for RKL platforms
- RAS fix
amdkfd:
- SVM fix
vc4:
- static function fix
mgag200:
- fix uninit var
panfrost:
- lock_region fixes
- Make some dma-buf config options depend on DMA_SHARED_BUFFER.
- Handle multiplication overflow of fbdev xres/yres in the core.
-----BEGIN PGP SIGNATURE-----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=R62Q
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Just an initial bunch of fixes for the merge window, amdgpu is most of
them with a few ttm fixes and an fbdev avoid multiply overflow fix.
core:
- Make some dma-buf config options depend on DMA_SHARED_BUFFER
- Handle multiplication overflow of fbdev xres/yres in the core
ttm:
- Fix ttm_bo_move_memcpy() when ttm_resource is subclassed
- Fix ttm deadlock if target BO isn't idle
- ttm build fix
- ttm docs fix
dma-buf:
- config option fixes
fbdev:
- limit resolutions to avoid int overflow
i915:
- stddef change.
amdgpu:
- Misc cleanups, typo fixes
- EEPROM fix
- Add some new PCI IDs
- Scatter/Gather display support for Yellow Carp
- PCIe DPM fix for RKL platforms
- RAS fix
amdkfd:
- SVM fix
vc4:
- static function fix
mgag200:
- fix uninit var
panfrost:
- lock_region fixes"
* tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drm: (36 commits)
drm/ttm: Fix a deadlock if the target BO is not idle during swap
fbmem: don't allow too huge resolutions
dma-buf: DMABUF_SYSFS_STATS should depend on DMA_SHARED_BUFFER
dma-buf: DMABUF_DEBUG should depend on DMA_SHARED_BUFFER
drm/i915: use linux/stddef.h due to "isystem: trim/fixup stdarg.h and other headers"
dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER
drm/amdkfd: drop process ref count when xnack disable
drm/amdgpu: enable more pm sysfs under SRIOV 1-VF mode
drm/amdgpu: fix fdinfo race with process exit
drm/amdgpu: Fix a deadlock if previous GEM object allocation fails
drm/amdgpu: stop scheduler when calling hw_fini (v2)
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amd/display: Initialize lt_settings on instantiation
drm/amd/display: cleanup idents after a revert
drm/amd/display: Fix memory leak reported by coverity
drm/ttm: Fix ttm_bo_move_memcpy() for subclassed struct ttm_resource
drm/amdgpu/swsmu: fix spelling mistake "minimun" -> "minimum"
drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform
drm/amdgpu: show both cmd id and name when psp cmd failed
drm/amd/display: setup system context for APUs
...
Fix a leak in s_fsnotify_connectors counter in case of a race between
concurrent add of new fsnotify mark to an object.
The task that lost the race fails to drop the counter before freeing
the unused connector.
Following umount() hangs in fsnotify_sb_delete()/wait_var_event(),
because s_fsnotify_connectors never drops to zero.
Fixes: ec44610fe2 ("fsnotify: count all objects with attached connectors")
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Link: https://lore.kernel.org/linux-fsdevel/20210907063338.ycaw6wvhzrfsfdlp@xzhoux.usersys.redhat.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andre reported fw_devlink=on breaking OLPC XO-1.5 [1].
OLPC XO-1.5 is an X86 system that uses a mix of ACPI and OF to populate
devices. The root cause seems to be ISA devices not setting their fwnode
field. But trying to figure out how to fix that doesn't seem worth the
trouble because the OLPC devicetree is very sparse/limited and fw_devlink
only adds the links causing this issue. Considering that there aren't many
users of OF in an X86 system, simply fw_devlink DT support for X86.
[1] - https://lore.kernel.org/lkml/3c1f2473-92ad-bfc4-258e-a5a08ad73dd0@web.de/
Fixes: ea718c6990 ("Revert "Revert "driver core: Set fw_devlink=on by default""")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Cc: Andre Muller <andre.muller@web.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Andre Müller <andre.muller@web.de>
Link: https://lore.kernel.org/r/20210910011446.3208894-1-saravanak@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Using generated/compile.h triggered a full LKDTM rebuild with every
build. Avoid this by using the exported strings instead.
Fixes: b8661450bc ("lkdtm: Add kernel version to failure hints")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210901233406.2571643-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()
snd_soc_register_card()
-> snd_soc_bind_card()
-> snd_soc_add_pcm_runtime()
-> adding cpu dai
-> adding codec dai
-> adding platform component.
So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.
As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.
This patch set is to fix this issue for SAI, ESAI, MICFIL, SPDIF,
XCVR drivers.
Shengjiu Wang (5):
ASoC: fsl_sai: register platform component before registering cpu dai
ASoC: fsl_esai: register platform component before registering cpu dai
ASoC: fsl_micfil: register platform component before registering cpu
dai
ASoC: fsl_spdif: register platform component before registering cpu
dai
ASoC: fsl_xcvr: register platform component before registering cpu dai
sound/soc/fsl/fsl_esai.c | 16 ++++++++++------
sound/soc/fsl/fsl_micfil.c | 15 ++++++++++-----
sound/soc/fsl/fsl_sai.c | 14 +++++++++-----
sound/soc/fsl/fsl_spdif.c | 14 +++++++++-----
sound/soc/fsl/fsl_xcvr.c | 15 ++++++++++-----
5 files changed, 48 insertions(+), 26 deletions(-)
--
2.17.1
To be used by IBS raw data display: It needs the recorder's cpuid in
order to determine which errata workarounds to apply to the data, and
the pmu_mappings are needed in order to figure out which PMU sample
type is IBS Fetch vs. IBS Op.
When not available from perf.data, we assume local operation, and
retrieve cpuid and pmu mappings directly from the running system.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210817221509.88391-2-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of using the file offset in the debug file.
This fixes a regression from 00a3423492 ("perf symbols: Make
dso__load_bfd_symbols() load PE files from debug cache only"), causing
incorrect symbol resolution when debug file have been stripped from
non-debug sections (in which case its .text section is empty and doesn't
have any file position).
The debug files could also be created with a different file alignment,
and have different file positions from the mmap-ed binary, or have the
section reordered.
This instead looks for the file image base, using the corresponding bfd
*ABS* symbols. As PE symbols only have 4 bytes, it also needs to keep
.text section vma high bits.
Signed-off-by: Remi Bernon <rbernon@codeweavers.com>
Fixes: 00a3423492 ("perf symbols: Make dso__load_bfd_symbols() load PE files from debug cache only")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210909192637.4139125-1-rbernon@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '--' prevented arguments from being passed to the script, such as:
$ perf script report stackcollapse -i my_perf.data
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
LPU-Reference: 20200427142327.21172-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in these csets:
59ab844eed ("compat: remove some compat entry points")
dce4910396 ("mm: wire up syscall process_mrelease")
b48c7236b1 ("exit/bdflush: Remove the deprecated bdflush system call")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -v -e process_mrelease
event qualifier tracepoint filter: (common_pid != 19351 && common_pid != 9112) && (id == 448)
^C#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep process_mrelease tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
448 common process_mrelease sys_process_mrelease
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When memory allocation for afe->reg_back_up fails, reg_back_up can't
be used.
Keep the suspend/resume flow but skip register backup when
afe->reg_back_up is NULL, in case illegal memory access happens.
Fixes: 283b612429 ("ASoC: mediatek: implement mediatek common structure")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210910092613.30188-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()
snd_soc_register_card()
-> snd_soc_bind_card()
-> snd_soc_add_pcm_runtime()
-> adding cpu dai
-> adding codec dai
-> adding platform component.
So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.
As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()
snd_soc_register_card()
-> snd_soc_bind_card()
-> snd_soc_add_pcm_runtime()
-> adding cpu dai
-> adding codec dai
-> adding platform component.
So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.
As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.
Fixes: a2388a498a ("ASoC: fsl: Add S/PDIF CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()
snd_soc_register_card()
-> snd_soc_bind_card()
-> snd_soc_add_pcm_runtime()
-> adding cpu dai
-> adding codec dai
-> adding platform component.
So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.
As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.
Fixes: 47a70e6fc9 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()
snd_soc_register_card()
-> snd_soc_bind_card()
-> snd_soc_add_pcm_runtime()
-> adding cpu dai
-> adding codec dai
-> adding platform component.
So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.
As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.
Fixes: 43d24e76b6 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()
snd_soc_register_card()
-> snd_soc_bind_card()
-> snd_soc_add_pcm_runtime()
-> adding cpu dai
-> adding codec dai
-> adding platform component.
So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.
As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.
Fixes: 4355082149 ("ASoC: Add SAI SoC Digital Audio Interface driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>