Commit graph

1,058,063 commits

Author SHA1 Message Date
Chunyan Zhang
245ca2cc21
spi: sprd: Fix the wrong WDG_LOAD_VAL
Use 50ms as default timeout value and the time clock is 32768HZ.
The original value of WDG_LOAD_VAL is not correct, so this patch
fixes it.

Fixes: ac17750120 ("spi: sprd: Add the support of restarting the system")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20210826091549.2138125-2-zhang.lyra@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-26 12:09:37 +01:00
Evgeny Novikov
4720f1bf4e usb: ehci-orion: Handle errors of clk_prepare_enable() in probe
ehci_orion_drv_probe() did not account for possible errors of
clk_prepare_enable() that in particular could cause invocation of
clk_disable_unprepare() on clocks that were not prepared/enabled yet,
e.g. in remove or on handling errors of usb_add_hcd() in probe. Though,
there were several patches fixing different issues with clocks in this
driver, they did not solve this problem.

Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe()
to avoid calls of clk_disable_unprepare() without previous successful
invocation of clk_prepare_enable().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 8c869edaee ("ARM: Orion: EHCI: Add support for enabling clocks")
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 13:09:34 +02:00
Andrey Ignatov
96a6b93b69 rtnetlink: Return correct error on changing device netns
Currently when device is moved between network namespaces using
RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID,
IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and
target namespace already has device with same name, userspace will get
EINVAL what is confusing and makes debugging harder.

Fix it so that userspace gets more appropriate EEXIST instead what makes
debugging much easier.

Before:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: Invalid argument

After:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: File exists

The problem is that do_setlink() passes its `char *ifname` argument,
that it gets from a caller, to __dev_change_net_namespace() as is (as
`const char *pat`), but semantics of ifname and pat can be different.

For example, __rtnl_newlink() does this:

net/core/rtnetlink.c
    3270	char ifname[IFNAMSIZ];
     ...
    3286	if (tb[IFLA_IFNAME])
    3287		nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
    3288	else
    3289		ifname[0] = '\0';
     ...
    3364	if (dev) {
     ...
    3394		return do_setlink(skb, dev, ifm, extack, tb, ifname, status);
    3395	}

, i.e. do_setlink() gets ifname pointer that is always valid no matter
if user specified IFLA_IFNAME or not and then do_setlink() passes this
ifname pointer as is to __dev_change_net_namespace() as pat argument.

But the pat (pattern) in __dev_change_net_namespace() is used as:

net/core/dev.c
   11198	err = -EEXIST;
   11199	if (__dev_get_by_name(net, dev->name)) {
   11200		/* We get here if we can't use the current device name */
   11201		if (!pat)
   11202			goto out;
   11203		err = dev_get_valid_name(net, dev, pat);
   11204		if (err < 0)
   11205			goto out;
   11206	}

As the result the `goto out` path on line 11202 is neven taken and
instead of returning EEXIST defined on line 11198,
__dev_change_net_namespace() returns an error from dev_get_valid_name()
and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier.

Fixes: d8a5ec6727 ("[NET]: netlink support for moving devices between network namespaces.")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26 12:08:08 +01:00
Vladimir Oltean
67021f25d9
regmap: teach regmap to use raw spinlocks if requested in the config
Some drivers might access regmap in a context where a raw spinlock is
held. An example is drivers/irqchip/irq-ls-extirq.c, which calls
regmap_update_bits() from struct irq_chip :: irq_set_type, which is a
method called by __irq_set_trigger() under the desc->lock raw spin lock.

Since desc->lock is a raw spin lock and the regmap internal lock for
mmio is a plain spinlock (which can become sleepable on RT), this is an
invalid locking scheme and we get a splat stating that this is a
"[ BUG: Invalid wait context ]".

It seems reasonable for regmap to have an option use a raw spinlock too,
so add that in the config such that drivers can request it.

Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210825205041.927788-2-vladimir.oltean@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-26 12:07:32 +01:00
Robin Murphy
2fd276c3ee
ASoC: dwc: Get IRQ optionally
The IRQ is explicitly optional, so use platform_get_irq_optional() and
avoid platform_get_irq() logging a spurious error when trying to use the
thing in DMA mode.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/c857f334e3c9e651e088b675b3938cb5f798b133.1629906123.git.robin.murphy@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-26 12:07:23 +01:00
Jonathan Lemon
bc8e05d6b9 ptp: ocp: Simplify Kconfig.
Remove the 'imply' statements, these apparently are not doing
what I expected.  Platform modules which are used by the driver
still need to be enabled in the overall config for them to be
used, but there isn't a hard dependency on them.

Use 'depend' for selectable modules which provide functions
used directly by the driver.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26 12:06:42 +01:00
Mathias Nyman
669bc5a188 xhci: Add bus number to some debug messages
As we register two usb buses for each xHC, and systems with several
hosts are more and more common it is getting hard to follow the
flow of debug messages without knowing which bus they belong to

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 13:06:03 +02:00
Mathias Nyman
0d9b9f533b xhci: Add additional dynamic debug to follow URBs in cancel and error cases.
Add more debugging messages to follow what happends to a URB internally
in special cases like URB cancel, halted endpoints and endpoint reset.

Helps tracking issues like URB never given back by host.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 13:06:03 +02:00
Mathias Nyman
2847c46c61 Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"
This reverts commit 5d5323a6f3.

That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.

Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2

After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.

Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.

exit latency calculations have been revised since then

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 13:06:02 +02:00
Mathias Nyman
94f339147f xhci: Fix failure to give back some cached cancelled URBs.
Only TDs with status TD_CLEARING_CACHE will be given back after
cache is cleared with a set TR deq command.

xhci_invalidate_cached_td() failed to set the TD_CLEARING_CACHE status
for some cancelled TDs as it assumed an endpoint only needs to clear the
TD it stopped on.

This isn't always true. For example with streams enabled an endpoint may
have several stream rings, each stopping on a different TDs.

Note that if an endpoint has several stream rings, the current code
will still only clear the cache of the stream pointed to by the last
cancelled TD in the cancel list.

This patch only focus on making sure all canceled TDs are given back,
avoiding hung task after device removal.
Another fix to solve clearing the caches of all stream rings with
cancelled TDs is needed, but not as urgent.

This issue was simultanously discovered and debugged by
by Tao Wang, with a slightly different fix proposal.

Fixes: 674f8438c1 ("xhci: split handling halted endpoints into two steps")
Cc: <stable@vger.kernel.org> #5.12
Reported-by: Tao Wang <wat@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 13:06:02 +02:00
Mathias Nyman
4843b4b5ec xhci: fix even more unsafe memory usage in xhci tracing
Removes static char buffer usage in the following decode functions:
	xhci_decode_ctrl_ctx()
	xhci_decode_slot_context()
	xhci_decode_usbsts()
	xhci_decode_doorbell()
	xhci_decode_ep_context()

Caller must provide a buffer to use.
In tracing use __get_str() as recommended to pass buffer.

Minor changes are needed in other xhci code as these functions are also
used elsewhere

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 13:06:02 +02:00
Mathias Nyman
cbf286e8ef xhci: fix unsafe memory usage in xhci tracing
Removes static char buffer usage in the following decode functions:
	xhci_decode_trb()
	xhci_decode_ptortsc()

Caller must provide a buffer to use.
In tracing use __get_str() as recommended to pass buffer.

Minor chanes are needed in xhci debugfs code as these functions are also
used there. Changes include moving XHCI_MSG_MAX definititon from
xhci-trace.h to xhci.h

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 13:06:02 +02:00
Heiner Kallweit
4b33433ee7 r8169: add rtl_enable_exit_l1
This adds a function for what has been magic register writes so far.
It's based on recent changes to vendor drivers r8101, r8168, r8125,
and deals with events that trigger an early ASPM L1 exit.
Description of the bits has been kindly provided by Realtek.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26 12:05:43 +01:00
Paolo Abeni
9af771d2ec selftests/net: allow GRO coalesce test on veth
This change extends the existing GRO coalesce test to
allow running on top of a veth pair, so that no H/W dep
is required to run them.

By default gro.sh will use the veth backend, and will try
to use exiting H/W in loopback mode if a specific device
name is provided with the '-i' command line option.

No functional change is intended for the loopback-based
tests, just move all the relevant initialization/cleanup
code into the related script.

Introduces a new initialization helper script for the
veth backend, and plugs the correct helper script according
to the provided command line.

Additionally, enable veth-based tests by default.

v1 -> v2:
  - drop unused code in setup_veth_ns() - Willem

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26 12:03:49 +01:00
Catalin Marinas
1a7f67e618 Merge branch 'for-next/entry' into for-next/core
* for-next/entry:
  : More entry.S clean-ups and conversion to C.
  arm64: entry: call exit_to_user_mode() from C
  arm64: entry: move bulk of ret_to_user to C
  arm64: entry: clarify entry/exit helpers
  arm64: entry: consolidate entry/exit helpers
2021-08-26 11:49:33 +01:00
Catalin Marinas
622909e51a Merge branches 'for-next/mte', 'for-next/misc' and 'for-next/kselftest', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
  arm64/perf: Replace '0xf' instances with ID_AA64DFR0_PMUVER_IMP_DEF

* for-next/mte:
  : Miscellaneous MTE improvements.
  arm64/cpufeature: Optionally disable MTE via command-line
  arm64: kasan: mte: remove redundant mte_report_once logic
  arm64: kasan: mte: use a constant kernel GCR_EL1 value
  arm64: avoid double ISB on kernel entry
  arm64: mte: optimize GCR_EL1 modification on kernel entry/exit
  Documentation: document the preferred tag checking mode feature
  arm64: mte: introduce a per-CPU tag checking mode preference
  arm64: move preemption disablement to prctl handlers
  arm64: mte: change ASYNC and SYNC TCF settings into bitfields
  arm64: mte: rename gcr_user_excl to mte_ctrl
  arm64: mte: avoid TFSRE0_EL1 related operations unless in async mode

* for-next/misc:
  : Miscellaneous updates.
  arm64: Do not trap PMSNEVFR_EL1
  arm64: mm: fix comment typo of pud_offset_phys()
  arm64: signal32: Drop pointless call to sigdelsetmask()
  arm64/sve: Better handle failure to allocate SVE register storage
  arm64: Document the requirement for SCR_EL3.HCE
  arm64: head: avoid over-mapping in map_memory
  arm64/sve: Add a comment documenting the binutils needed for SVE asm
  arm64/sve: Add some comments for sve_save/load_state()
  arm64: replace in_irq() with in_hardirq()
  arm64: mm: Fix TLBI vs ASID rollover
  arm64: entry: Add SYM_CODE annotation for __bad_stack
  arm64: fix typo in a comment
  arm64: move the (z)install rules to arch/arm64/Makefile
  arm64/sve: Make fpsimd_bind_task_to_cpu() static
  arm64: unnecessary end 'return;' in void functions
  arm64/sme: Document boot requirements for SME
  arm64: use __func__ to get function name in pr_err
  arm64: SSBS/DIT: print SSBS and DIT bit when printing PSTATE
  arm64: cpufeature: Use defined macro instead of magic numbers
  arm64/kexec: Test page size support with new TGRAN range values

* for-next/kselftest:
  : Kselftest additions for arm64.
  kselftest/arm64: signal: Add a TODO list for signal handling tests
  kselftest/arm64: signal: Add test case for SVE register state in signals
  kselftest/arm64: signal: Verify that signals can't change the SVE vector length
  kselftest/arm64: signal: Check SVE signal frame shows expected vector length
  kselftest/arm64: signal: Support signal frames with SVE register data
  kselftest/arm64: signal: Add SVE to the set of features we can check for
  kselftest/arm64: pac: Fix skipping of tests on systems without PAC
  kselftest/arm64: mte: Fix misleading output when skipping tests
  kselftest/arm64: Add a TODO list for floating point tests
  kselftest/arm64: Add tests for SVE vector configuration
  kselftest/arm64: Validate vector lengths are set in sve-probe-vls
  kselftest/arm64: Provide a helper binary and "library" for SVE RDVL
  kselftest/arm64: Ignore check_gcr_el1_cswitch binary
2021-08-26 11:49:27 +01:00
Pavel Skripkin
ce6a700704 staging: r8188eu: remove {read,write}_macreg
These 2 functions are unused, so they can be simply removed

Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/d591e29d77da73790c71f7a8e508a8b16fd48f65.1629789580.git.paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:39:36 +02:00
Marc Zyngier
419025b3b4 Merge branch kvm-arm64/misc-5.15 into kvmarm-master/next
* kvm-arm64/misc-5.15:
  : Misc improvements for 5.15:
  :
  : - Account the number of VMID-wide TLB invalidations as
  :   remote TLB flushes
  : - Fix comments in the VGIC code
  : - Cleanup the PMU IMPDEF identification
  : - Streamline the TGRAN2 usage
  : - Avoid advertising a 52bit IPA range for non-64KB configs
  : - Avoid spurious signalling when a HW-mapped interrupt is in the
  :   A+P state on entry, and in the P state on exit, but that the
  :   physical line is not pending anymore.
  : - Bunch of minor cleanups
  KVM: arm64: Trim guest debug exception handling

Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-08-26 11:36:12 +01:00
Alexandru Elisei
50cb99fa89 arm64: Do not trap PMSNEVFR_EL1
Commit 31c00d2aea ("arm64: Disable fine grained traps on boot") zeroed
the fine grained trap registers to prevent unwanted register traps from
occuring. However, for the PMSNEVFR_EL1 register, the corresponding
HDFG{R,W}TR_EL2.nPMSNEVFR_EL1 fields must be 1 to disable trapping. Set
both fields to 1 if FEAT_SPEv1p2 is detected to disable read and write
traps.

Fixes: 31c00d2aea ("arm64: Disable fine grained traps on boot")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210824154523.906270-1-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-08-26 11:35:09 +01:00
Raghavendra Rao Ananta
8ce8a6fce9 KVM: arm64: Trim guest debug exception handling
The switch-case for handling guest debug exception covers
all the debug exception classes, but functionally, doesn't
do anything with them other than ESR_ELx_EC_WATCHPT_LOW.
Moreover, even though handled well, the 'default' case
could be confusing from a security point of view, stating
that the guests' actions can potentially flood the syslog.
But in reality, the code is unreachable.

Hence, trim down the function to only handle the case with
ESR_ELx_EC_WATCHPT_LOW with a simple 'if' check.

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210823223940.1878930-1-rananta@google.com
2021-08-26 11:33:32 +01:00
Saurav Girepunje
3f60c32f15 staging: r8188eu: core: remove condition with no effect
Remove the condition with no effect (if == else) in rtw_led.c
file.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/YSFgrLUfXzgcT6k4@user
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:33:24 +02:00
Michael Straube
f7766f1b00 staging: r8188eu: remove ethernet.h header file
There are only two definitions from ethernet.h used in the driver.
Namely:

#define ETHERNET_HEADER_SIZE           14      /*  Ethernet Header Length */
#define LLC_HEADER_SIZE                6       /*  LLC Header Length */

Both are only used in the file core/rtw_recv.c. Replace the usage of
ETHERNET_HEADER_SIZE with ETH_HLEN, move the definition of LLC_HEADER_SIZE
into rtw_recv.h and remove the now unused ethernet.h header file.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210824123621.10801-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:29:05 +02:00
Michael Straube
f09dc911bd staging: r8188eu: remove ip.h header file
The struct ip_options declared in ip.h is only unsed in the optlength
macro which is also defined in ip.h and not used in the driver code.
All other definitions/declarations in ip.h are duplicated from
<include/uapi/linux/ip.h>. Remove the ip.h header file and its includes.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210824123621.10801-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:29:05 +02:00
Michael Straube
68ad97bc5a staging: r8188eu: remove if_ether.h header file
All constants, declarations and macros in if_ether.h are either
duplicated from <uapi/linux/if_ether.h> or unused. Remove the file
if_ether.h and its includes.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210824123621.10801-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:29:04 +02:00
Pavel Skripkin
f228d1d509 staging: r8188eu: make rtw_deinit_intf_priv return void
rtw_deinit_intf_priv() always return success, so there is no need in
return value

Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210823184059.19742-1-paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:24:19 +02:00
Michael Straube
bd5f258aff staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-9-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:23:13 +02:00
Michael Straube
0b704920fb staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:23:13 +02:00
Michael Straube
544984a774 staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c
Use is_multicast_ether_addr instead of custom macro IS_MCAST, all
buffers are properly aligned.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:23:13 +02:00
Michael Straube
2d4fe65101 staging: r8188eu: use is_multicast_ether_addr in core/rtw_security.c
Use is_multicast_ether_addr instead of custom macro IS_MCAST, all
buffers are properly aligned.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:23:12 +02:00
Michael Straube
d0624c3379 staging: r8188eu: use is_multicast_ether_addr in core/rtw_recv.c
Use is_multicast_ether_addr instead of custom macro IS_MCAST, all
buffers are properly aligned.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:23:12 +02:00
Michael Straube
129f4197f2 staging: r8188eu: use is_multicast_ether_addr in core/rtw_mp.c
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:23:12 +02:00
Michael Straube
08cff18916 staging: r8188eu: use is_multicast_ether_addr in core/rtw_mlme.c
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:23:12 +02:00
Michael Straube
8aa824f2ec staging: r8188eu: ensure proper alignment for eth address buffers
Add __aligned(2) to eth address buffers in structs rx_pkt_attrib and
pkt_attrib to ensure proper alignment for usage with functions from
<linux/etherdevice.h>

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:23:11 +02:00
Michael Straube
2a3afb168e staging: r8188eu: remove unnecessary parentheses
Remove unnecessary parentheses to improve readability.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210822114014.21584-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:20:25 +02:00
Michael Straube
f9f72f7f72 staging: r8188eu: remove dead code
if (0) is never true, remove code that is never executed.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210822114014.21584-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:20:25 +02:00
Michael Straube
3eaa30d162 staging: r8188eu: remove 5 GHz code
The driver is for chips that do not operate in the 5 GHz band.
Remove some 5 GHz related code.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823193028.12391-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:19:56 +02:00
Michael Straube
8d82693b0b staging: r8188eu: remove cmd_osdep.h header file
All functions declared in the cmd_osdep.h header file are only used in
a single c source file. Make the functions static and remove the header
file and its includes.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210821155151.25822-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:19:29 +02:00
Larry Finger
6ca88cb5e8 staging: r8188eu: Make mult-byte entities in dhcp header be big endian
The 16- and 32-bit quantities in the dhcp message definition must be
big endian.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210821151459.26078-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:19:07 +02:00
Phillip Potter
e92e5f30ad staging: r8188eu: change declaration of Efuse_Read1ByteFromFakeContent
Remove forward declaration of Efuse_Read1ByteFromFakeContent function
from core/rtw_efuse.c, as the function is defined in full directly
after this and therefore this forward declaration is redundant.

In addition, convert the storage class of the function to static, as the
function is only used with rtw_efuse.c, and tidy up the signature
alignment.

Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Michael Straube<straube.linux@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210821105615.6307-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:18:43 +02:00
Xiangyang Zhang
2d29f81ce8 staging: r8188eu: Fix a resource leak in update_bcn_wps_ie
The "pbackup_remainder_ie" variable is not freed when "pwps_ie_src" is null

Fixes: 15865124fe ("staging: r8188eu: introduce new core dir for RTL8188eu driver")
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Xiangyang Zhang <xyz.sun.ok@gmail.com>
Link: https://lore.kernel.org/r/20210821081824.14745-1-xyz.sun.ok@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:17:51 +02:00
Martin Kaiser
5598e47a79 staging: r8188eu: set pipe only once
Set the pipe for reading or writing in usbctrl_vendorreq only once.
There's no need to set it again for every retry.

This patch is an adaptation of commit 889ed8b5e3 ("staging: rtl8188eu:
set pipe only once") for the new r8188eu driver.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:17:01 +02:00
Martin Kaiser
f7231a04e4 staging: r8188eu: remove unused members of struct _io_ops
Remove function pointers which are not used by the r8188eu driver.

Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:17:01 +02:00
Martin Kaiser
22d0d6104e staging: r8188eu: clean up the usb_writeN
Remove unnecessary variables, check the length.

Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:17:01 +02:00
Martin Kaiser
e8baed3c76 staging: r8188eu: clean up the usb_writeXY functions
Remove unnecessary variables, summarize declarations and assignments.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:17:01 +02:00
Martin Kaiser
0d3e1be506 staging: r8188eu: clean up the usb_readXY functions
Remove unnecessary variables, summarize declarations and assignments.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:17:00 +02:00
Martin Kaiser
2214ea8299 staging: r8188eu: remove an unused enum
The VENDOR_READ and VENDOR_WRITE defines are not used.

Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:17:00 +02:00
Martin Kaiser
f410923ad5 staging: r8188eu: rewrite usb vendor request defines
Replace the numeric values with USB constants to make their
meaning clearer.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:17:00 +02:00
Martin Kaiser
805ac0da01 staging: rtl8188eu: use actual request type as parameter
At the moment, usbctrl_vendorreq's requesttype parameter must be set to
1 for reading and 0 for writing. It's then converted to the actual
bmRequestType for the USB control request. We can simplify the code and
avoid this conversion if the caller passes the actual bmRequestType.

This patch is an adaptation of commit 788fde0310 ("staging: rtl8188eu:
use actual request type as parameter") for the new r8188eu driver.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:17:00 +02:00
Martin Kaiser
74f64654ec staging: r8188eu: remove unused define
_HCI_OPS_OS_C_ is not used in the r8188eu driver. Remove it.

Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:17:00 +02:00
Martin Kaiser
65945da601 staging: r8188eu: remove unnecessary cast
name is a const char * by default. This type should be ok for r8188eu.

Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26 12:16:59 +02:00