Commit graph

1,058,063 commits

Author SHA1 Message Date
Vidya
aee5122491 octeontx2-af: configure npc for cn10k to allow packets from cpt
On CN10K, the higher bits in the channel number represents the CPT
channel number. Mask out these higher bits in the npc configuration
to allow packets from cpt for parsing.

Signed-off-by: Vidya <vvelumuri@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:33 +01:00
Hariprasad Kelam
99b8e5479d octeontx2-af: cn10K: Get NPC counters value
The way SW can identify the number NPC counters supported by silicon
has changed for CN10K. This patch addresses this reading appropriate
registers to find out number of counters available.

Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:33 +01:00
Subbaraya Sundeep
7df5b4b260 octeontx2-af: Allocate low priority entries for PF
If the mcam entry allocation request is from PF
and NOT a priority allocation request then allocate
low priority entries so that PF entries always have
lower priority than its VFs. This is required so
that entries with (base) MCAM match criteria have lower
priority compared to entries with (base + additional)
match criteria. This patch considers only best case
scenario where PF entries are allocated from low
priority zone if low priority zone has free space.
There are worst case scenarios like:
1. VFs allocating hundreds of MCAM entries leading to VFs
using all mid priority zone and low priority zone entries
hence no entries free from low priority zone for PF.
2. All the PFs and VFs in the system allocating and freeing
entries causing fragmentation in MCAM space and all the
entries requested by PF could not fit in low priority
zone for allocation.
This patch do not handle worst case scenarios.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:33 +01:00
Sunil Goutham
2da4894327 octeontx2-pf: devlink params support to set mcam entry count
Added support for setting or modifying MCAM entry count at
runtime via devlink params.

commands:
  devlink dev param show
pci/0002:02:00.0:
  name mcam_count type driver-specific
    values:
      cmode runtime value 16

  devlink dev param set pci/0002:02:00.0 name mcam_count
				value 64 cmode runtime

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:33 +01:00
Sunil Goutham
2e2a8126ff octeontx2-pf: Unify flow management variables
Variables used for TC flow management like maximum number
of flows, number of flows installed etc are a copy of ntuple
flow management variables. Since both TC and NTUPLE are not
supported at the same time, it's better to unify these with
common variables.

This patch addresses this unification and also does cleanup of
other minor stuff wrt TC.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:33 +01:00
Sunil Goutham
cc65fcab88 octeontx2-pf: Sort the allocated MCAM entry indices
Per single mailbox request a maximum of 256 MCAM entries
can be allocated. If more than 256 are being allocated, then
the mcam indices in the final list could get jumbled. Hence
sort the indices.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:33 +01:00
Rakesh Babu
3cffaed213 octeontx2-pf: Ntuple filters support for VF netdev
Add packet flow classification support for both LMAC mapped virtual
functions and loopback VFs. This patch adds supports for ntuple
offload feature.

Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:33 +01:00
Sunil Goutham
0b3834aeaf octeontx2-pf: Enable NETIF_F_RXALL support for VF driver
Enabled NETIF_F_RXALL support for VF driver.
Also removed MTU range comments which are no longer valid.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:32 +01:00
Sunil Goutham
a83bdada06 octeontx2-af: Add debug messages for failures
Added debug messages for various failures during probe.
This will help in quickly identifying the API where the failure
is happening.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:32 +01:00
Naveen Mamindlapalli
7278c359e5 octeontx2-af: add proper return codes for AF mailbox handlers
Add appropriate error codes to be used when returning from AF
mailbox handlers due to some error condition.

Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:32 +01:00
Subbaraya Sundeep
9cfc580956 octeontx2-af: Modify install flow error codes
When installing a flow using npc_install_flow
mailbox there are number of reasons to reject
the request like caller is not permitted,
invalid channel specified in request, flow
not supported in extraction profile and so on.
Hence define new error codes for npc flows and use
them instead of generic error codes.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 10:06:32 +01:00
David S. Miller
354e1f9d88 mlx5-updates-2021-08-16
The following patchset provides two separate mlx5 updates
 1) Ethtool RSS context and MQPRIO channel mode support:
   1.1) enable mlx5e netdev driver to allow creating Transport Interface RX
        (TIRs) objects on the fly to be used for ethtool RSS contexts and
        TX MQPRIO channel mode
   1.2) Introduce mlx5e_rss object to manage such TIRs.
   1.3) Ethtool support for RSS context
   1.4) Support MQPRIO channel mode
 
 2) Bridge offloads Lag support:
    to allow adding bond net devices to mlx5 bridge
   2.1) Address bridge port by (vport_num, esw_owner_vhca_id) pair
        since vport_num is only unique per eswitch and in lag mode we
        need to manage ports from both eswitches.
   2.2) Allow connectivity between representors of different eswitch
        instances that are attached to same bridge
   2.3) Bridge LAG, Require representors to be in shared FDB mode and
        introduce local and peer ports representors,
        match on paired eswitch metadata in peer FDB entries,
        And finally support addition/deletion and aging of peer flows.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmEa8gwACgkQSD+KveBX
 +j56lAf/esRKDA2kKdtYr7AUNCDmRf/Fj5jBRuASuEWOGgoBaGNZprBw7So5MZdc
 kZpkTnrvFZ5KXsq8nfCJsFkmepHMfJYmTc4VWXpMOyxYlsTwQc9UQ3MBboylMYqL
 23KJKxurFN0kyMIOGciqXaetHgIhf+iQx1osJZd4WGk1soiWX7JiDV6gXXEZu4Ge
 VH261CwOCLwpJ4STTMdjgcGnARStMcr0I3LJm7BWoMVls6FcLXcNslhvcRYYyUiX
 B5UXYrZPLA39CegL/y/jP1vdH6pStb453x1dtjIoJiM+iOIjTaGkYOLF6w2QQWqd
 /8R4MPeAYJ4ENsWmrEbPG+F/5GIN1Q==
 =KWry
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2021-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2021-08-16

The following patchset provides two separate mlx5 updates
1) Ethtool RSS context and MQPRIO channel mode support:
  1.1) enable mlx5e netdev driver to allow creating Transport Interface RX
       (TIRs) objects on the fly to be used for ethtool RSS contexts and
       TX MQPRIO channel mode
  1.2) Introduce mlx5e_rss object to manage such TIRs.
  1.3) Ethtool support for RSS context
  1.4) Support MQPRIO channel mode

2) Bridge offloads Lag support:
   to allow adding bond net devices to mlx5 bridge
  2.1) Address bridge port by (vport_num, esw_owner_vhca_id) pair
       since vport_num is only unique per eswitch and in lag mode we
       need to manage ports from both eswitches.
  2.2) Allow connectivity between representors of different eswitch
       instances that are attached to same bridge
  2.3) Bridge LAG, Require representors to be in shared FDB mode and
       introduce local and peer ports representors,
       match on paired eswitch metadata in peer FDB entries,
       And finally support addition/deletion and aging of peer flows.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17 09:51:19 +01:00
Jaime Liao
6f802696c2 mtd: spinand: macronix: Add Quad support for serial NAND flash
Adding FLAG "SPINAND_HAS_QE_BIT" for Quad mode support on Macronix
Serial Flash.
Validated via normal(default) and QUAD mode by read, erase, read back,
on Xilinx Zynq PicoZed FPGA board which included Macronix
SPI Host(drivers/spi/spi-mxic.c).

Signed-off-by: Jaime Liao <jaimeliao@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1628472472-32008-1-git-send-email-jaimeliao@mxic.com.tw
2021-08-17 10:42:00 +02:00
Iwona Winiarska
8b07e990fb soc: aspeed: p2a-ctrl: Fix boundary check for mmap
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.

Fixes: 01c60dcea9 ("drivers/misc: Add Aspeed P2A control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-17 18:00:44 +09:30
Iwona Winiarska
b49a0e69a7 soc: aspeed: lpc-ctrl: Fix boundary check for mmap
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.

Fixes: 6c4e976785 ("drivers/misc: Add Aspeed LPC control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-17 17:58:42 +09:30
Takashi Iwai
8fc8e90315 ALSA: hda: Drop workaround for a hang at shutdown again
The commit 0165c4e19f ("ALSA: hda: Fix hang during shutdown due to
link reset") modified the shutdown callback of the HD-audio controller
for working around a hang.  Meanwhile, the actual culprit of the hang
was identified to be the leftover active codecs that may interfere
with the powered down controller somehow, but we took a minimal fix
approach for 5.14, and that was the commit above.

Now, since the codec drivers go runtime-suspend at shutdown for 5.15,
we can revert the change and make sure that the full runtime-suspend
is performed at shutdown of HD-audio controller again.  This patch
essentially reverts the commit above to restore the behavior.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045
Link: https://lore.kernel.org/r/20210817075630.7115-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-17 09:56:55 +02:00
Takashi Iwai
c0a7f9372c Merge branch 'for-linus' into for-next 2021-08-17 09:46:27 +02:00
Takashi Iwai
4bf61ad5f0 ALSA: hda/via: Apply runtime PM workaround for ASUS B23E
ASUS B23E requires the same workaround like other machines with
VT1802, otherwise it looses the codec power on a few nodes and the
sound kept silence.

Fixes: a0645daf16 ("ALSA: HDA: Early Forbid of runtime PM")
Link: https://lore.kernel.org/r/ac2232f142efcd67fe6ac38897f704f7176bd200.camel@gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210817052432.14751-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-17 08:02:44 +02:00
Imre Deak
0165c4e19f ALSA: hda: Fix hang during shutdown due to link reset
During system shutdown codecs may be still active, and resetting the
controller->codec HW link in this state - based on the bug reporter's
tests - leads to the shutdown sequence to get stuck. This happens at
least on the reporter's KBL system with an ALC662 codec.

For now fix the issue by skipping the link reset step.

Fixes: 472e18f63c ("ALSA: hda: Release controller display power during shutdown/reboot")
References: https://bugzilla.kernel.org/show_bug.cgi?id=214045
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3618#note_1024665
Reported-and-tested-by: youling257@gmail.com
Cc: youling257@gmail.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20210816174259.2759103-1-imre.deak@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-17 07:14:30 +02:00
Darrick J. Wong
8d04fbe71f iomap: move loop control code to iter.c
Now that we've moved iomap to the iterator model, rename this file to be
in sync with the functions contained inside of it.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
fad0a1ab34 iomap: constify iomap_iter_srcmap
The srcmap returned from iomap_iter_srcmap is never modified, so mark
the iomap returned from it const and constify a lot of code that never
modifies the iomap.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
65dd814a61 fsdax: switch the fault handlers to use iomap_iter
Avoid the open coded calls to ->iomap_begin and ->iomap_end and call
iomap_iter instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Shiyang Ruan
c2436190e4 fsdax: factor out a dax_fault_actor() helper
The core logic in the two dax page fault functions is similar. So, move
the logic into a common helper function. Also, to facilitate the
addition of new features, such as CoW, switch-case is no longer used to
handle different iomap types.

Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Shiyang Ruan
55f81639a7 fsdax: factor out helpers to simplify the dax fault code
The dax page fault code is too long and a bit difficult to read. And it
is hard to understand when we trying to add new features. Some of the
PTE/PMD codes have similar logic. So, factor out helper functions to
simplify the code.

Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[hch: minor cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
b74b1293e6 iomap: rework unshare flag
Instead of another internal flags namespace inside of buffered-io.c,
just pass a UNSHARE hint in the main iomap flags field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
1b5c1e36dc iomap: pass an iomap_iter to various buffered I/O helpers
Pass the iomap_iter structure instead of individual parameters to
various internal helpers for buffered I/O.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
57320a01fe iomap: remove iomap_apply
iomap_apply is unused now, so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
[djwong: rebase this patch to preserve git history of iomap loop control]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
ca289e0b95 fsdax: switch dax_iomap_rw to use iomap_iter
Switch the dax_iomap_rw implementation to use iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
3d99a1ce38 iomap: switch iomap_swapfile_activate to use iomap_iter
Switch iomap_swapfile_activate to use iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
c4740bf1ed iomap: switch iomap_seek_data to use iomap_iter
Rewrite iomap_seek_data to use iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
40670d18e8 iomap: switch iomap_seek_hole to use iomap_iter
Rewrite iomap_seek_hole to use iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
6d8a1287a4 iomap: switch iomap_bmap to use iomap_iter
Rewrite the ->bmap implementation based on iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
[djwong: restructure the loop to make its behavior a little clearer]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
7892386d35 iomap: switch iomap_fiemap to use iomap_iter
Rewrite the ->fiemap implementation based on iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
a6d3d49587 iomap: switch __iomap_dio_rw to use iomap_iter
Switch __iomap_dio_rw to use iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
253564baff iomap: switch iomap_page_mkwrite to use iomap_iter
Switch iomap_page_mkwrite to use iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
2aa3048e03 iomap: switch iomap_zero_range to use iomap_iter
Switch iomap_zero_range to use iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
8fc274d1f4 iomap: switch iomap_file_unshare to use iomap_iter
Switch iomap_file_unshare to use iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
ce83a0251c iomap: switch iomap_file_buffered_write to use iomap_iter
Switch iomap_file_buffered_write to use iomap_iter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
f6d480006c iomap: switch readahead and readpage to use iomap_iter
Switch the page cache read functions to use iomap_iter instead of
iomap_apply.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
f4b896c213 iomap: add the new iomap_iter model
The iomap_iter struct provides a convenient way to package up and
maintain all the arguments to the various mapping and operation
functions.  It is operated on using the iomap_iter() function that
is called in loop until the whole range has been processed.  Compared
to the existing iomap_apply() function this avoid an indirect call
for each iteration.

For now iomap_iter() calls back into the existing ->iomap_begin and
->iomap_end methods, but in the future this could be further optimized
to avoid indirect calls entirely.

Based on an earlier patch from Matthew Wilcox <willy@infradead.org>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
[djwong: add to apply.c to preserve git history of iomap loop control]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
740499c784 iomap: fix the iomap_readpage_actor return value for inline data
The actor should never return a larger value than the length that was
passed in.  The current code handles this gracefully, but the opcoming
iter model will be more picky.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
1acd9e9c01 iomap: mark the iomap argument to iomap_read_page_sync const
iomap_read_page_sync never modifies the passed in iomap, so mark
it const.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
78c64b00f8 iomap: mark the iomap argument to iomap_read_inline_data const
iomap_read_inline_data never modifies the passed in iomap, so mark
it const.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
7e4f4b2d68 fsdax: mark the iomap argument to dax_iomap_sector as const
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
6d49cc8545 fs: mark the iomap argument to __block_write_begin_int const
__block_write_begin_int never modifies the passed in iomap, so mark it
const.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
e3c4ffb0c2 iomap: mark the iomap argument to iomap_inline_data_valid const
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
4495c33e4d iomap: mark the iomap argument to iomap_inline_data const
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
66b8165ed4 iomap: mark the iomap argument to iomap_sector const
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
1d25d0aecf iomap: remove the iomap arguments to ->page_{prepare,done}
These aren't actually used by the only instance implementing the methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00
Christoph Hellwig
d9d381f3ef iomap: fix a trivial comment typo in trace.h
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 21:26:33 -07:00