When a LPAR is migratable, we should consider the maximum possible NUMA
node instead of the number of NUMA nodes from the actual system.
The DT property 'ibm,current-associativity-domains' defines the maximum
number of nodes the LPAR can see when running on that box. But if the
LPAR is being migrated on another box, it may see up to the nodes
defined by 'ibm,max-associativity-domains'. So if a LPAR is migratable,
that value should be used.
Unfortunately, there is no easy way to know if an LPAR is migratable or
not. The hypervisor exports the property 'ibm,migratable-partition' in
the case it set to migrate partition, but that would not mean that the
current partition is migratable.
Without this patch, when a LPAR is started on a 2 node box and then
migrated to a 3 node box, the hypervisor may spread the LPAR's CPUs on
the 3rd node. In that case if a CPU from that 3rd node is added to the
LPAR, it will be wrongly assigned to the node because the kernel has
been set to use up to 2 nodes (the configuration of the departure node).
With this patch applies, the CPU is correctly added to the 3rd node.
Fixes: f9f130ff2e ("powerpc/numa: Detect support for coregroup")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210511073136.17795-1-ldufour@linux.ibm.com
Fix the !CONFIG_BLOCK build after the recent cleanup.
Fixes: 5ed964f8e5 ("mm: hide laptop_mode_wb_timer entirely behind the BDI API")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-34-bigeasy@linutronix.de
When we are building all the various pinctrl structures for the
Allwinner pinctrl devices, we do some estimation about the maximum
number of distinct function (names) that we will need.
So far we take the number of pins as an upper bound, even though we
can actually have up to four special functions per pin. This wasn't a
problem until now, since we indeed have typically far more pins than
functions, and most pins share common functions.
However the H616 "-r" pin controller has only two pins, but four
functions, so we run over the end of the array when we are looking for
a matching function name in sunxi_pinctrl_add_function - there is no
NULL sentinel left that would terminate the loop:
[ 8.200648] Unable to handle kernel paging request at virtual address fffdff7efbefaff5
[ 8.209179] Mem abort info:
....
[ 8.368456] Call trace:
[ 8.370925] __pi_strcmp+0x90/0xf0
[ 8.374559] sun50i_h616_r_pinctrl_probe+0x1c/0x28
[ 8.379557] platform_probe+0x68/0xd8
Do an actual worst case allocation (4 functions per pin, three common
functions and the sentinel) for the initial array allocation. This is
now heavily overestimating the number of functions in the common case,
but we will reallocate this array later with the actual number of
functions, so it's only temporarily.
Fixes: 561c1cf17c ("pinctrl: sunxi: Add support for the Allwinner H616-R pin controller")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210722132548.22121-1-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-35-bigeasy@linutronix.de
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-33-bigeasy@linutronix.de
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-26-bigeasy@linutronix.de
To avoid code duplication, allocate the per-engine shared channel in
the core code instead. This is the usual channel that all jobs are
submitted to when MLOCKing is not in use. Once MLOCKs are implemented
on Host1x side, we can also update this to avoid allocating a shared
channel when MLOCKs are enabled.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
With the new UAPI implementation, engines are powered on and off
when there are active jobs, and the core code handles channel
allocation. To accommodate that, boot the engine as part of
runtime PM instead of using the open_channel callback, which is
not used by the new submit path.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Update the tegra_drm.h UAPI header, adding the new proposed UAPI.
The old staging UAPI is left in for now, with minor modification
to avoid name collisions.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Casting a small array of u8 to an unsigned long is *never* OK:
- it does funny thing when the array size is less than that of a long,
as it accesses random places in the stack
- it makes everything even more fun with a BE kernel
Fix this by building the unsigned long used as a bitmap byte by byte,
in a way that works across endianess and has no undefined behaviours.
An extra BUILD_BUG_ON() catches the unlikely case where the array
would be larger than a single unsigned long.
Fixes: 1490d9f841 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210725180830.250218-1-maz@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-10-bigeasy@linutronix.de
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-9-bigeasy@linutronix.de
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-8-bigeasy@linutronix.de
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20210803141621.780504-7-bigeasy@linutronix.de
STM32MP135 SoC embeds 9 GPIO banks of 16 gpios each. Those GPIO
banks contain same features as STM32MP157 GPIO banks except that
each GPIO line of the STM32MP135 can be secured.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de
Link: https://lore.kernel.org/r/20210723132810.25728-3-alexandre.torgue@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
New compatible to manage ball out and pin muxing of STM32MP135 SoC.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de
Link: https://lore.kernel.org/r/20210723132810.25728-2-alexandre.torgue@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The static function host1x_bo_lookup() in drm.c is also useful
elsewhere. Extract it as tegra_gem_lookup() in gem.c.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The value of pcs->flags is not overwritten in function
pcs_parse_bits_in_pinctrl_entry() and its subfunctions, so moving this
check to the beginning of the function eliminates unnecessary rollback
operations.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210722033930.4034-3-thunder.leizhen@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix to return -ENOTSUPP instead of 0 when PCS_HAS_PINCONF is true, which
is the same as that returned in pcs_parse_pinconf().
Fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210722033930.4034-2-thunder.leizhen@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The new UAPI will have its own firewall, and we don't want to run
the firewall in the Host1x driver for those jobs. As such, add a
parameter to host1x_job_alloc to specify if we want to skip the
firewall in the Host1x driver.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for inserting syncpoint waits in the CDMA pushbuffer.
These waits need to be done in HOST1X class, while gather submitted
by the application execute in engine class.
Support is added by converting the gather list of job into a command
list that can include both gathers and waits. When the job is
submitted, these commands are pushed as the appropriate opcodes
on the CDMA pushbuffer.
Also supported are waits relative to the start of the job,
which are useful for jobs doing multiple things with an engine
that doesn't natively support pipelining.
While at it, use 32-bit waits on chips that support them.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a callback field to the job structure, to be called just before
the job is to be freed. This allows the job's submitter to clean
up any of its own state, like decrement runtime PM refcounts.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a new property for jobs to enable or disable recovery i.e.
CPU increments of syncpoints to max value on job timeout. This
allows for a more solid model for hanged jobs, where userspace
doesn't need to guess if a syncpoint increment happened because
the job completed, or because job timeout was triggered.
On job timeout, we stop the channel, NOP all future jobs on the
channel using the same syncpoint, mark the syncpoint as locked
and resume the channel from the next job, if any.
The future jobs are NOPed, since because we don't do the CPU
increments, the value of the syncpoint is no longer synchronized,
and any waiters would become confused if a future job incremented
the syncpoint. The syncpoint is marked locked to ensure that any
future jobs cannot increment the syncpoint either, until the
application has recognized the situation and reallocated the
syncpoint.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add an implementation of dma_fences based on syncpoints. Syncpoint
interrupts are used to signal fences. Additionally, after
software signaling has been enabled, a 30 second timeout is started.
If the syncpoint threshold is not reached within this period,
the fence is signalled with an -ETIMEDOUT error code. This is to
allow fences that would never reach their syncpoint threshold to
be cleaned up. The timeout can potentially be removed in the future
after job tracking code has been refactored.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SC8180x platform comes with PMC8180 and PMC8180c, add support for
the GPIO controller in these PMICs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210629003851.1787673-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The HP ProBook 650 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210810100846.65844-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.
For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.
For spi-pic32, this is probably not currently an issue but is still good to
fix though.
Fixes: 1bcb9f8ceb ("spi: spi-pic32: Add PIC32 SPI master driver")
Cc: Purna Chandra Mandal <purna.mandal@microchip.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081727.19491-2-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.
For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.
For spi-fsl-dspi, this is probably not currently an issue but is still
good to fix though.
Fixes: 90ba37033c ("spi: spi-fsl-dspi: Add DMA support for Vybrid")
Cc: Sanchayan Maity <maitysanchayan@gmail.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210810081727.19491-1-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse warnings triggered truncating the IDs of some platform device
tables. Unfortunately some of the IDs in the match tables were missed
which breaks audio. The KBL change has been verified to fix audio, the
CML change was not tested as it was found through grepping the broken
changes and found to match the same situation in anticipation that it
should also be fixed.
Fixes: 94efd726b9 ("ASoC: Intel: kbl_da7219_max98357a: shrink platform_id below 20 characters")
Fixes: 24e46fb811 ("ASoC: Intel: bxt_da7219_max98357a: shrink platform_id below 20 characters")
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Matt Davis <mattedavis@google.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210809213544.1682444-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Vladimir Oltean says:
====================
Fix broken backpressure during FDB dump in DSA drivers
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).
When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.
Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.
DSA is one of the few switchdev drivers that have an .ndo_fdb_dump
implementation, because of the assumption that the hardware and software
FDBs cannot be efficiently kept in sync via SWITCHDEV_FDB_ADD_TO_BRIDGE.
Other drivers with a home-cooked .ndo_fdb_dump implementation are
ocelot and dpaa2-switch. These appear to do the correct thing, as do the
other DSA drivers, so nothing else appears to need fixing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).
When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.
Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.
Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.
Fixes: 291d1e72b7 ("net: dsa: sja1105: Add support for FDB and MDB management")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).
When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.
Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.
Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.
Fixes: 58c59ef9e9 ("net: dsa: lantiq: Add Forwarding Database access")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).
When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.
Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.
Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.
Fixes: ab335349b8 ("net: dsa: lan9303: Add port_fast_age and port_fdb_dump methods")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into
multiple netlink skbs if the buffer provided by user space is too small
(one buffer will typically handle a few hundred FDB entries).
When the current buffer becomes full, nlmsg_put() in
dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index
of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that
point, and then the dump resumes on the same port with a new skb, and
FDB entries up to the saved index are simply skipped.
Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to
drivers, then drivers must check for the -EMSGSIZE error code returned
by it. Otherwise, when a netlink skb becomes full, DSA will no longer
save newly dumped FDB entries to it, but the driver will continue
dumping. So FDB entries will be missing from the dump.
Fix the broken backpressure by propagating the "cb" return code and
allow rtnl_fdb_dump() to restart the FDB dump with a new skb.
Fixes: e4b27ebc78 ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Missing definition for the P0_DIV2 core clock on the Renesas RZ/G2L
(R9A07G044) SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYP6nCwAKCRCKwlD9ZEnx
cBBYAQChmXlc7NoSf/fVy85x+9fA2VhbO0JxkwuK1qJD1JkusAEAq2GrHxxIba1H
NtMckRLKIAE3vJa25OQdK+T9Hasw9wY=
=mbnD
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a07g044-dt-binding-defs-tag2' into HEAD
Renesas RZ/G2L DT Binding Definitions Update
Missing definition for the P0_DIV2 core clock on the Renesas RZ/G2L
(R9A07G044) SoC, shared by driver and DT source files.
The merge_fdt_bootargs() function by definition consumes more than 1024
bytes of stack because it has a 1024 byte command line on the stack,
meaning that we always get a warning when building this file:
arch/arm/boot/compressed/atags_to_fdt.c: In function 'merge_fdt_bootargs':
arch/arm/boot/compressed/atags_to_fdt.c:98:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
However, as this is the decompressor and we know that it has a very shallow
call chain, and we do not actually risk overflowing the kernel stack
at runtime here.
This just shuts up the warning by disabling the warning flag for this
file.
Tested on Nexus 7 2012 builds.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
This fixes a Keystone 2 regression discovered as a side effect of
defining an passing the physical start/end sections of the kernel
to the MMU remapping code.
As the Keystone applies an offset to all physical addresses,
including those identified and patches by phys2virt, we fail to
account for this offset in the kernel_sec_start and kernel_sec_end
variables.
Further these offsets can extend into the 64bit range on LPAE
systems such as the Keystone 2.
Fix it like this:
- Extend kernel_sec_start and kernel_sec_end to be 64bit
- Add the offset also to kernel_sec_start and kernel_sec_end
As passing kernel_sec_start and kernel_sec_end as 64bit invariably
incurs BE8 endianness issues I have attempted to dry-code around
these.
Tested on the Vexpress QEMU model both with and without LPAE
enabled.
Fixes: 6e121df14c ("ARM: 9090/1: Map the lowmem and kernel separately")
Reported-by: Nishanth Menon <nmenon@kernel.org>
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Nishanth Menon <nmenon@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The conditional by the generic header is the same,
hence drop unnecessary duplication.
Link: https://lore.kernel.org/r/20210510114107.43006-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Currently, the (z/u)install targets in arch/arm/Makefile descend into
arch/arm/boot/Makefile to invoke the shell script, but there is no
good reason to do so.
arch/arm/Makefile can run the shell script directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Consistenly mark all entries of "linux-arm-kernel@lists.infradead.org"
as moderated for non-subscribers.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Rename module_init & module_exit functions that are named
"mod_init" and "mod_exit" so that they are unique in both the
System.map file and in initcall_debug output instead of showing
up as almost anonymous "mod_init".
This is helpful for debugging and in determining how long certain
module_init calls take to execute.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>