Commit graph

1,058,063 commits

Author SHA1 Message Date
Suman Anna
9b694bea4b ARM: dts: am33xx-l4: Add PRUSS node
Add the DT nodes for the PRU-ICSS on AM33xx family of SoCs. The AM33xx
SoCs contain a single PRU-ICSS instance and is represented by a pruss
node and other child nodes. PRU-ICSS is supported only on AM3356+ SoCs
though in the AM33xx family, so the nodes are added under the
corresponding disabled interconnect target module node in the common
am33xx-l4 dtsi file. The target module node should be enabled in only
those derivative board files that use a SoC containing PRU-ICSS.

The PRUSS subsystem node contains the entire address space. The various
sub-modules of the PRU-ICSS are represented as individual child nodes
(so platform devices themselves) of the PRUSS subsystem node. These
include the two PRU cores and the interrupt controller. All the Data
RAMs are represented within a child node of its own named 'memories'
without any compatible. The Real Time Media Independent Interface
controller (MII_RT), and the CFG sub-module are represented as syscon
nodes. The PRUSS CFG module has a clock mux for IEP clock, this clk
node is added under the CFG child node 'clocks'. The default source
for this mux clock is the PRU_ICSS_IEP_GCLK clock.

The DT nodes use all standard properties. The regs property in the PRU
nodes define the addresses for the Instruction RAM, the Debug and Control
sub-modules for that PRU core. The firmware for each PRU core is defined
through a 'firmware-name' property.

The default names for the firmware images for each PRU core are defined
as follows (these can be adjusted either in derivative board dts files
or through sysfs at runtime if required):
     PRU-ICSS PRU0 Core: am335x-pru1_0-fw
     PRU-ICSS PRU1 Core: am335x-pru1_1-fw

Note:
1. There are few more sub-modules like the Industrial Ethernet Peripheral
   (IEP), MDIO, UART, eCAP that do not have bindings and so will be added
   in the future.
2. The PRUSS INTC on AM335x SoCs also connect the host interrupts 0 to
   TSC_ADC; 6 and 7 as possible DMA events, so use the 'ti,irqs-reserved'
   property in derivative board dts files _if_ any of them should not be
   handled by the host OS.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-08-03 15:25:08 +03:00
Greg Kroah-Hartman
6bfc527290 interconnect fixes for v5.14
This contains a few core and driver fixes that have been reported.
 - core: Fix undersized devres_alloc allocation
 - core: Zero initial BW after sync-state
 - core: Always call pre_aggregate before aggregate
 - qcom: rpmh: Ensure floor BW is enforced for all nodes
 - qcom: rpmh: Add BCMs to commit list in pre_aggregate
 
 Signed-off-by: Georgi Djakov <djakov@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJhCSPmAAoJEIDQzArG2BZjWvQQAMRZamVsziZtA0/L8H9fs6mh
 cumEtl0ez7WtCWkJKIsGdkYVCwybezsz51WRaV11yuZl211bjLSyh9Lwof2UTVos
 HK8GAL/2HCogTagDgK31gcjH+mC2UTF1gcx1+Isa6MXb6BBqGkPQGZHG2AEALeO5
 slwZpGERNfyZbnj/6kIDU/zkb6dYI3fIfeTAOsHJiwZyIN1ebVnqxpZQm+74VNN3
 fDmheNSBgznouBQQEbw3kmka18NGaD08FfZ5+gkCJkFo2t27cczgmwfi7xDfU8QT
 NsslwEfp5RH2r5h5KLZQqM0VlN81NuME1dO8H+x8QHemNImXisCgbbIJD228LSEQ
 RRT9I1+LWwEnRhYcCBzurKEbh6BN1dYoAE0QamqGyPkGw2nVZY85i/rDyZMU76DW
 QqE0HPL7GtnKC2N6/dSxK3K0l9zQkROU8080DSFQ1EF1nH79KQ4/49OPjYVi0iFf
 iMsbBkP31F4Mqbo7JGl2MH4Ml9uHdmXDWtBKJ8cU6M6SFcJ+TU4CjRQmEYykR+iW
 FNqzXpcsAbAQ82kWbyI1aEY4kTMW0R25ryxwqfXT544DPDDYrUS9Oe/EZ3iipV8z
 3t4OtYdIMoS6iXc5uEO6fbuayHvT5w8Fw5gdBZQrnRo/RKWLvjebubz7Nim3SUuJ
 2tAU8eD3eQ+AUKRk4qYl
 =qcmS
 -----END PGP SIGNATURE-----

Merge tag 'icc-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus

Georgi writes:

interconnect fixes for v5.14

This contains a few core and driver fixes that have been reported.
- core: Fix undersized devres_alloc allocation
- core: Zero initial BW after sync-state
- core: Always call pre_aggregate before aggregate
- qcom: rpmh: Ensure floor BW is enforced for all nodes
- qcom: rpmh: Add BCMs to commit list in pre_aggregate

Signed-off-by: Georgi Djakov <djakov@kernel.org>

* tag 'icc-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
  interconnect: Fix undersized devress_alloc allocation
  interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate
  interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes
  interconnect: Always call pre_aggregate before aggregate
  interconnect: Zero initial BW after sync-state
2021-08-03 14:10:59 +02:00
David S. Miller
c8f6c77d06 Merge branch 'Space-cleanup'
Arnd Bergmann says:

====================
drivers/net/Space.c cleanup

I discovered that there are still a couple of drivers that rely on
beiong statically initialized from drivers/net/Space.c the way
we did in the last century. As it turns out, there are a couple
of simplifications that can be made here, as well as some minor
bugfixes.

There are four classes of drivers that use this:

- most 10mbit ISA bus ethernet drivers (and one 100mbit one)
- both ISA localtalk drivers
- several m68k ethernet drivers
- one obsolete WAN driver

I found that the drivers using in arch/m68k/ don't actually benefit
from being probed this way as they do not rely on the netdev= command
line arguments, they have simply never been changed to work like a
modern driver.

I had previously sent a patch to remove the sbni/granch driver, and
there were no objections to this patch but forgot to resend it after
some discussion about another patch in the same series.

For the ISA drivers, there is usually no way to probe multiple devices
at boot time other than the netdev= arguments, so all that logic is left
in place for the moment, but centralized in a single file that only gets
included in the kernel build if one or more of the drivers are built-in.

I'm also changing the old-style init_module() functions in these drivers
to static functions with a module_init() annotation, to more closely
resemble modern drivers. These are the last drivers in the kernel to
still use init_module/cleanup_module, removing those may enable future
cleanups to the module loading process.

       Arnd

Changes in v2:

- replace xsurf100 change with Michael's version
- make it PATCH instead of RFC
- rebase to net-next as of August 3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:27 +01:00
Arnd Bergmann
a07d8ecf6b ethernet: isa: convert to module_init/module_exit
There are a couple of ISA ethernet drivers that use the old
init_module/cleanup_module function names for the main entry
points, nothing else uses those any more.

Change them to the documented method with module_init()
and module_exit() markers next to static functions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:26 +01:00
Arnd Bergmann
d52c1069d6 wan: hostess_sv11: use module_init/module_exit helpers
This is one of very few drivers using the old init_module/cleanup_module
function names. Change it over to the modern method.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:26 +01:00
Arnd Bergmann
72bcad5393 wan: remove sbni/granch driver
The driver was merged in 1999 and has only ever seen treewide cleanups
since then, with no indication whatsoever that anyone has actually
had access to hardware for testing the patches.

>From the information in the link below, it appears that the hardware
is for some leased line system in Russia that has since been
discontinued, and useless without any remote end to connect to.

As the driver still feels like a Linux-2.2 era artifact today, it
appears that the best way forward is to just delete it.

Link: https://www.tms.ru/%D0%90%D0%B4%D0%B0%D0%BF%D1%82%D0%B5%D1%80_%D0%B4%D0%BB%D1%8F_%D0%B2%D1%8B%D0%B4%D0%B5%D0%BB%D0%B5%D0%BD%D0%BD%D1%8B%D1%85_%D0%BB%D0%B8%D0%BD%D0%B8%D0%B9_Granch_SBNI12-10
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:26 +01:00
Arnd Bergmann
db3db1f417 wan: remove stale Kconfig entries
The dscc4 driver was removed in 2019 but these Kconfig entries remain,
so remove them as well.

Fixes: 28c9eb9042 ("net/wan: dscc4: remove broken dscc4 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:26 +01:00
Arnd Bergmann
4228c39428 make legacy ISA probe optional
There are very few ISA drivers left that rely on the static probing from
drivers/net/Space.o. Make them all select a new CONFIG_NETDEV_LEGACY_INIT
symbol, and drop the entire probe logic when that is disabled.

The 9 drivers that are called from Space.c are the same set that
calls netdev_boot_setup_check().

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:26 +01:00
Arnd Bergmann
5ea2f5ffde move netdev_boot_setup into Space.c
This is now only used by a handful of old ISA drivers,
and can be moved into the file they already all depend on.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:26 +01:00
Michael Schmitz
f8ade8dddb xsurf100: drop include of lib8390.c
Now that ax88796.c exports the ax_NS8390_reinit() symbol, we can
include 8390.h instead of lib8390.c, avoiding duplication of that
function and killing a few compile warnings in the bargain.

Fixes: 861928f4e6 ("net-next: New ax88796 platform
driver for Amiga X-Surf 100 Zorro board (m68k)")

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:26 +01:00
Michael Schmitz
375df5f8c1 ax88796: export ax_NS8390_init() hook
The block I/O code for the new X-Surf 100 ax88796 driver needs
ax_NS8390_init() for error fixup in its block_output function.

Export this static function through the ax_NS8390_reinit()
wrapper so we can lose the lib8380.c include in the X-Surf 100
driver.

[arnd: add the declaration in the header to avoid a
 -Wmissing-prototypes warning]
Fixes: 861928f4e6 ("net-next: New ax88796 platform
driver for Amiga X-Surf 100 Zorro board (m68k)")
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:25 +01:00
Arnd Bergmann
e179d78ee1 m68k: remove legacy probing
There are six m68k specific drivers that use the legacy probe method
in drivers/net/Space.c. However, all of these only support a single
device, and they completely ignore the command line settings from
netdev_boot_setup_check, so there is really no point at all.

Aside from sun3_82586, these already have a module_init function that
can be used for built-in mode as well, simply by removing the #ifdef.

Note that the 82596 driver was previously used on ISA as well, but
that got dropped long ago.

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:25 +01:00
Arnd Bergmann
47fd22f2b8 cs89x0: rework driver configuration
There are two drivers in the cs89x0 file, with the CONFIG_CS89x0_PLATFORM
symbol deciding which one is getting built. This is somewhat confusing
and makes it more likely ton configure a driver that works nowhere.

Split up the Kconfig option into separate ISA and PLATFORM drivers,
with the ISA symbol explicitly connecting to the static probing in
drivers/net/Space.c

The two drivers are still mutually incompatible at compile time,
which could be lifted by splitting them into multiple files,
but in practice this will make no difference.

The platform driver can now be enabled for compile-testing on
non-ARM machines.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:25 +01:00
Arnd Bergmann
8bbdf1bdf2 3c509: stop calling netdev_boot_setup_check
This driver never uses the information returned by
netdev_boot_setup_check, and is not called by the boot-time probing from
driver/net/Space.c, so just remove these stale references.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:25 +01:00
Arnd Bergmann
81dd3ee596 appletalk: ltpc: remove static probing
This driver never relies on the netdev_boot_setup_check()
to get its configuration, so it can just as well do its
own probing all the time.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:25 +01:00
Arnd Bergmann
19a11bf06c natsemi: sonic: stop calling netdev_boot_setup_check
The data from the kernel command line is no longer used since the
probe function gets it from the platform device resources instead.

The jazz version was changed to be like this in 2007, the xtensa
version apparently copied the code from there.

Fixes: ed9f0e0bf3 ("remove setup of platform device from jazzsonic.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:25 +01:00
Arnd Bergmann
0852aeb9c3 bcmgenet: remove call to netdev_boot_setup_check
The driver has never used the netdev->{irq,base_addr,mem_start}
members, so this call is completely unnecessary.

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 13:05:25 +01:00
David S. Miller
2dbf4c2e7e Merge branch 'ethtool-runtime-pm'
Heiner Kallweit says:

====================
ethtool: runtime-resume netdev parent before ethtool ops

If a network device is runtime-suspended then:
- network device may be flagged as detached and all ethtool ops (even if
  not accessing the device) will fail because netif_device_present()
  returns false
- ethtool ops may fail because device is not accessible (e.g. because being
  in D3 in case of a PCI device)

It may not be desirable that userspace can't use even simple ethtool ops
that not access the device if interface or link is down. To be more friendly
to userspace let's ensure that device is runtime-resumed when executing
ethtool ops in kernel.

This patch series covers the typical case that the netdev parent is power-
managed, e.g. a PCI device. Not sure whether cases exist where the netdev
itself is power-managed. If yes then we may need an extension for this.
But the series as-is at least shouldn't cause problems in that case.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:58:22 +01:00
Heiner Kallweit
d43c65b05b ethtool: runtime-resume netdev parent in ethnl_ops_begin
If a network device is runtime-suspended then:
- network device may be flagged as detached and all ethtool ops (even if not
  accessing the device) will fail because netif_device_present() returns
  false
- ethtool ops may fail because device is not accessible (e.g. because being
  in D3 in case of a PCI device)

It may not be desirable that userspace can't use even simple ethtool ops
that not access the device if interface or link is down. To be more friendly
to userspace let's ensure that device is runtime-resumed when executing the
respective ethtool op in kernel.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:58:22 +01:00
Heiner Kallweit
41107ac22f ethtool: move netif_device_present check from ethnl_parse_header_dev_get to ethnl_ops_begin
If device is runtime-suspended and not accessible then it may be
flagged as not present. If checking whether device is present is
done too early then we may bail out before we have the chance to
runtime-resume the device. Therefore move this check to
ethnl_ops_begin(). This is in preparation of a follow-up patch
that tries to runtime-resume the device before executing ethtool
ops.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:58:22 +01:00
Heiner Kallweit
c5ab51df03 ethtool: move implementation of ethnl_ops_begin/complete to netlink.c
In preparation of subsequent extensions to both functions move the
implementations from netlink.h to netlink.c.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:58:22 +01:00
Heiner Kallweit
f32a213765 ethtool: runtime-resume netdev parent before ethtool ioctl ops
If a network device is runtime-suspended then:
- network device may be flagged as detached and all ethtool ops (even if not
  accessing the device) will fail because netif_device_present() returns
  false
- ethtool ops may fail because device is not accessible (e.g. because being
  in D3 in case of a PCI device)

It may not be desirable that userspace can't use even simple ethtool ops
that not access the device if interface or link is down. To be more friendly
to userspace let's ensure that device is runtime-resumed when executing the
respective ethtool op in kernel.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:58:22 +01:00
Antoine Tenart
4039146777 net: ipv6: fix returned variable type in ip6_skb_dst_mtu
The patch fixing the returned value of ip6_skb_dst_mtu (int -> unsigned
int) was rebased between its initial review and the version applied. In
the meantime fade56410c was applied, which added a new variable (int)
used as the returned value. This lead to a mismatch between the function
prototype and the variable used as the return value.

Fixes: 40fc3054b4 ("net: ipv6: fix return value of ip6_skb_dst_mtu")
Cc: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:56:17 +01:00
Fei Qin
9fdc5d85a8 nfp: update ethtool reporting of pauseframe control
Pauseframe control is set to symmetric mode by default on the NFP.
Pause frames can not be configured through ethtool now, but ethtool can
report the supported mode.

Fixes: 265aeb511b ("nfp: add support for .get_link_ksettings()")
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:53:18 +01:00
Bijie Xu
0161d151f3 net: sched: provide missing kdoc for tcf_pkt_info and tcf_ematch_ops
Provide missing kdoc of fields of struct tcf_pkt_info and tcf_ematch_ops.

Found using ./scripts/kernel-doc -none -Werror include/net/pkt_cls.h

Signed-off-by: Bijie Xu <bijie.xu@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:52:32 +01:00
Bijie Xu
c87a4c542b net: flow_offload: correct comments mismatch with code
Correct mismatch between the name of flow_offload_has_one_action()
and its kdoc entry.

Found using ./scripts/kernel-doc -Werror -none include/net/flow_offload.h

Signed-off-by: Bijie Xu <bijie.xu@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:52:32 +01:00
Jakub Kicinski
c32325b8fd virtio-net: realign page_to_skb() after merges
We ended up merging two versions of the same patch set:

commit 8fb7da9e99 ("virtio_net: get build_skb() buf by data ptr")
commit 5c37711d9f ("virtio-net: fix for unable to handle page fault for address")

into net, and

commit 7bf64460e3 ("virtio-net: get build_skb() buf by data ptr")
commit 6c66c147b9 ("virtio-net: fix for unable to handle page fault for address")

into net-next. Redo the merge from commit 126285651b ("Merge
ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net"), so that
the most recent code remains.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:46:26 +01:00
Takashi Iwai
97367c9722 ALSA: seq: Fix racy deletion of subscriber
It turned out that the current implementation of the port subscription
is racy.  The subscription contains two linked lists, and we have to
add to or delete from both lists.  Since both connection and
disconnection procedures perform the same order for those two lists
(i.e. src list, then dest list), when a deletion happens during a
connection procedure, the src list may be deleted before the dest list
addition completes, and this may lead to a use-after-free or an Oops,
even though the access to both lists are protected via mutex.

The simple workaround for this race is to change the access order for
the disconnection, namely, dest list, then src list.  This assures
that the connection has been established when disconnecting, and also
the concurrent deletion can be avoided.

Reported-and-tested-by: folkert <folkert@vanheusden.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210801182754.GP890690@belle.intranet.vanheusden.com
Link: https://lore.kernel.org/r/20210803114312.2536-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-03 13:43:40 +02:00
David S. Miller
dc1a8079eb Merge branch 'bnxt_en-rx-ring'
Michael Chan says:

====================
bnxt_en: Increase maximum RX ring size when jumbo ring is unused

The RX jumbo ring is automatically enabled when HW GRO/LRO is enabled or
when the MTU exceeds the page size.  The RX jumbo ring provides a lot
more RX buffer space when it is in use.  When the RX jumbo ring is not
in use, some users report that the current maximum of 2K buffers is
too limiting.  This patchset increases the maximum to 8K buffers when
the RX jumbo ring is not used.  The default RX ring size is unchanged
at 511.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:38:47 +01:00
Michael Chan
c1129b51ca bnxt_en: Increase maximum RX ring size if jumbo ring is not used
The current maximum RX ring size is defined assuming the RX jumbo ring
(aka aggregation ring) is used.  The RX jumbo ring is automicatically used
when the MTU exceeds a threshold or when rx-gro-hw/lro is enabled.  The RX
jumbo ring is automatically sized up to 4 times the size of the RX ring
size.

The BNXT_MAX_RX_DESC_CNT constant is the upper limit on the size of the
RX ring whether or not the RX jumbo ring is used.  Obviously, the
maximum amount of RX buffer space is significantly less when the RX jumbo
ring is not used.

To increase flexibility for the user who does not use the RX jumbo ring,
we now define a bigger maximum RX ring size when the RX jumbo ring is not
used.  The maximum RX ring size is now up to 8K when the RX jumbo ring
is not used.  The maximum completion ring size also needs to be scaled
up to accomodate the larger maximum RX ring size.

Note that when the RX jumbo ring is re-enabled, the RX ring size will
automatically drop if it exceeds the maximum.

Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:38:47 +01:00
Michael Chan
03c7448790 bnxt_en: Don't use static arrays for completion ring pages
We currently store these page addresses and DMA addreses in static
arrays.  On systems with 4K pages, we support up to 64 pages per
completion ring.  The actual number of pages for each completion ring
may be much less than 64.  For example, when the RX ring size is set
to the default 511 entries, only 16 completion ring pages are needed
per ring.

In the next patch, we'll be doubling the maximum number of completion
pages.  So we convert to allocate these arrays as needed instead of
declaring them statically.

Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 12:38:46 +01:00
David Disseldorp
40fd8845c0 scsi: target: core: Drop unnecessary se_cmd ASC/ASCQ members
These members are only used for ALUA sense detail propagation, which can
just as easily be done via sense_reason_t.

Link: https://lore.kernel.org/r/20210728115353.2396-4-ddiss@suse.de
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03 07:27:43 -04:00
David Disseldorp
35410f8624 scsi: target: sbp: Drop incorrect ASC/ASCQ usage
The se_cmd scsi_asc and scsi_ascq members are only used for tracking ALUA
SCSI sense detail between target_core_alua and translate_sense_reason(), so
they're effectively always zero here.

Link: https://lore.kernel.org/r/20210728115353.2396-3-ddiss@suse.de
Cc: Chris Boot <bootc@bootc.net>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03 07:27:43 -04:00
David Disseldorp
7e457e5efc scsi: target: core: Avoid using lun_tg_pt_gp after unlock
core_alua_state_lba_dependent() currently uses lun->lun_tg_pt_gp without
holding the lun_tg_pt_gp_lock. The lock is taken in the caller, so obtain
the needed tg_pt_gp_id there instead.

Link: https://lore.kernel.org/r/20210728115353.2396-2-ddiss@suse.de
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03 07:27:42 -04:00
Bodo Stroesser
018c14911d scsi: target: tcmu: Add new feature KEEP_BUF
When running command pipelining for WRITE direction commands (e.g. tape
device write), userspace sends cmd completion to cmd ring before processing
write data. In that case userspace has to copy data before sending
completion, because cmd completion also implicitly releases the data buffer
in data area.

The new feature KEEP_BUF allows userspace to optionally keep the buffer
after completion by setting new bit TCMU_UFLAG_KEEP_BUF in
tcmu_cmd_entry_hdr->uflags. In that case buffer has to be released
explicitly by writing the cmd_id to new action item free_kept_buf.

All kept buffers are released during reset_ring and if userspace closes uio
device (tcmu_release).

Link: https://lore.kernel.org/r/20210713175021.20103-1-bostroesser@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03 07:27:42 -04:00
Bart Van Assche
c11a1ae9b8 scsi: ufs: Add fault injection support
Make it easier to test the UFS error handler and abort handler.

Link: https://lore.kernel.org/r/20210722033439.26550-19-bvanassche@acm.org
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03 07:27:42 -04:00
Jessica Yu
ced75a2f5d MAINTAINERS: Add Luis Chamberlain as modules maintainer
Luis has kindly agreed to help maintain the module loader. As my
responsibilities have shifted, I've found myself with less cycles to
devote to upstream maintenance these days. Luis is already very involved
and engaged upstream, and with his experience maintaining the kmod
module loader and usermode helper, I believe he is a great fit for this
area of the kernel.

Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-08-03 13:24:40 +02:00
Jason Ekstrand
1354d830cb drm/i915: Call i915_globals_exit() if pci_register_device() fails
In the unlikely event that pci_register_device() fails, we were tearing
down our PMU setup but not globals.  This leaves a bunch of memory slabs
lying around.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 32eb6bcfdd ("drm/i915: Make request allocation caches global")
[danvet: Fix conflicts against removal of the globals_flush
infrastructure.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-3-jason@jlekstrand.net
(cherry picked from commit db484889d1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed small conflict while cherry picking]
2021-08-03 07:13:53 -04:00
Matt Roper
9c9c6d0ab0 drm/i915: Correct SFC_DONE register offset
The register offset for SFC_DONE was missing a '0' at the end, causing
us to read from a non-existent register address.  We only use this
register in error state dumps so the mistake hasn't caused any real
problems, but fixing it will hopefully make the error state dumps a bit
more useful for debugging.

Fixes: e50dbdbfd9 ("drm/i915/tgl: Add SFC instdone to error state")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728233411.2365788-1-matthew.d.roper@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 82929a2140)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-08-03 07:08:56 -04:00
Cong Wang
83f3153556 bpf, unix: Check socket type in unix_bpf_update_proto()
As of now, only AF_UNIX datagram socket supports sockmap. But
unix_proto is shared for all kinds of AF_UNIX sockets, so we
have to check the socket type in unix_bpf_update_proto() to
explicitly reject other types, otherwise they could be added
into sockmap, too.

Fixes: c63829182c ("af_unix: Implement ->psock_update_sk_prot()")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210731195038.8084-1-xiyou.wangcong@gmail.com
2021-08-03 12:52:53 +02:00
Arnd Bergmann
f41e57af92 net: sparx5: fix bitmask on 32-bit targets
I saw the build failure that was fixed in commit 6387f65e2a ("net:
sparx5: fix compiletime_assert for GCC 4.9") and noticed another
issue that was introduced in the same patch: Using GENMASK() to
create a 64-bit mask does not work on 32-bit architectures.

This probably won't ever happen on this driver since it's specific
to a 64-bit SoC, but it's better to write it portably, so use
GENMASK_ULL() instead.

Fixes: f3cad2611a ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 11:52:37 +01:00
Yajun Deng
0547ffe624 net: Keep vertical alignment
Those files under /proc/net/stat/ don't have vertical alignment, it looks
very difficult. Modify the seq_printf statement, keep vertical alignment.

v2:
 - Use seq_puts() and seq_printf() correctly.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 11:51:10 +01:00
Hangbin Liu
3a755cd8b7 bonding: add new option lacp_active
Add an option lacp_active, which is similar with team's runner.active.
This option specifies whether to send LACPDU frames periodically. If set
on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".

Note, the LACPDU state frames still will be sent when init or unbind port.

v2: remove module parameter

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 11:50:22 +01:00
zhouchuangao
2414d62804 qed: Remove duplicated include of kernel.h
Duplicate include header file <linux/kernel.h>
line 4: #include <linux/kernel.h>
line 7: #include <linux/kernel.h>

Signed-off-by: zhouchuangao <zhouchuangao@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 11:49:28 +01:00
Len Baker
493c3ca6bd drivers/net/usb: Remove all strcpy() uses
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. The safe replacement is strscpy().

Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 11:48:28 +01:00
Shai Malin
9c638eaf42 qed: Remove redundant prints from the iWARP SYN handling
Remove redundant prints from the iWARP SYN handling.

Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 11:46:10 +01:00
Shai Malin
cdc1d86866 qed: Skip DORQ attention handling during recovery
The device recovery flow will reset the entire HW device, in that case
the DORQ HW block attention is redundant.

Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 11:45:44 +01:00
Shai Malin
995c3d49bd qed: Avoid db_recovery during recovery
Avoid calling the qed doorbell recovery - qed_db_rec_handler()
during device recovery.

Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 11:45:03 +01:00
Xin Long
ae954bbc45 sctp: move the active_key update after sh_keys is added
In commit 58acd10092 ("sctp: update active_key for asoc when old key is
being replaced"), sctp_auth_asoc_init_active_key() is called to update
the active_key right after the old key is deleted and before the new key
is added, and it caused that the active_key could be found with the key_id.

In Ying Xu's testing, the BUG_ON in sctp_auth_asoc_init_active_key() was
triggered:

  [ ] kernel BUG at net/sctp/auth.c:416!
  [ ] RIP: 0010:sctp_auth_asoc_init_active_key.part.8+0xe7/0xf0 [sctp]
  [ ] Call Trace:
  [ ]  sctp_auth_set_key+0x16d/0x1b0 [sctp]
  [ ]  sctp_setsockopt.part.33+0x1ba9/0x2bd0 [sctp]
  [ ]  __sys_setsockopt+0xd6/0x1d0
  [ ]  __x64_sys_setsockopt+0x20/0x30
  [ ]  do_syscall_64+0x5b/0x1a0

So fix it by moving the active_key update after sh_keys is added.

Fixes: 58acd10092 ("sctp: update active_key for asoc when old key is being replaced")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 11:43:43 +01:00
David S. Miller
07e1d6b3e0 Merge branch 'skb_expand_head'
Vasily Averin says:

====================
skbuff: introduce skb_expand_head()

currently if skb does not have enough headroom skb_realloc_headrom is called.
It is not optimal because it creates new skb.

this patch set introduces new helper skb_expand_head()
Unlike skb_realloc_headroom, it does not allocate a new skb if possible;
copies skb->sk on new skb when as needed and frees original skb in case of failures.

This helps to simplify ip[6]_finish_output2(), ip6_xmit() and few other
functions in vrf, ax25 and bpf.

There are few other cases where this helper can be used
but it requires an additional investigations.

v3 changes:
 - ax25 compilation warning fixed
 - v5.14-rc4 rebase
 - now it does not depend on non-committed pathces

v2 changes:
 - helper's name was changed to skb_expand_head
 - fixed few mistakes inside skb_expand_head():
    skb_set_owner_w should set sk on nskb
    kfree was replaced by kfree_skb()
    improved warning message
 - added minor refactoring in changed functions in vrf and bpf patches
 - removed kfree_skb() in ax25_rt_build_path caller ax25_ip_xmit
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03 11:21:39 +01:00