Commit graph

1,058,063 commits

Author SHA1 Message Date
Biju Das
1dbd981fcf dt-bindings: net: renesas,etheravb: Document Gigabit Ethernet IP
Document Gigabit Ethernet IP found on RZ/G2L SoC.

Gigabit Ethernet Interface includes Ethernet controller (E-MAC),
Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory
access controller (DMAC) for transferring transmitted Ethernet
frames to and received Ethernet frames from respective storage
areas in the URAM at high speed.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210727123450.15918-1-biju.das.jz@bp.renesas.com
Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-02 14:15:27 -06:00
Md Haris Iqbal
3087b335b5 block/rnbd: Use sysfs_emit instead of s*printf function for sysfs show
sysfs_emit function was added to be aware of the PAGE_SIZE maximum of
the temporary buffer used for outputting sysfs content, so there is no
possible overruns. So replace the uses of any s*printf functions for
the sysfs show functions with sysfs_emit.

Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20210726115950.470543-3-jinpu.wang@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:40 -06:00
Gioh Kim
94dace8c85 block/rnbd-clt: Use put_cpu_ptr after get_cpu_ptr
This patch replaces put_cpu_var with put_cpu_ptr because
get_cpu_ptr should be paired with put_cpu_ptr.

Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20210726115950.470543-2-jinpu.wang@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:40 -06:00
Damien Le Moal
2bc1f6e442 block: remove blk-mq-sysfs dead code
In block/blk-mq-sysfs.c, struct blk_mq_ctx_sysfs_entry is not used to
define any attribute since the "mq" sysfs directory contains only
sub-directories (no attribute files). As a result, blk_mq_sysfs_show(),
blk_mq_sysfs_store(), and struct sysfs_ops blk_mq_sysfs_ops are all
unused and unnecessary. Remove all this unused code.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210713081837.524422-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:29 -06:00
Matteo Croce
9f65c489b6 loop: raise media_change event
Make the loop device raise a DISK_MEDIA_CHANGE event on attach or detach.

	# udevadm monitor -up |grep -e DISK_MEDIA_CHANGE -e DEVNAME &

	# losetup -f zero
	[    7.454235] loop0: detected capacity change from 0 to 16384
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop0
	DEVNAME=/dev/loop0
	DEVNAME=/dev/loop0

	# losetup -f zero
	[   10.205245] loop1: detected capacity change from 0 to 16384
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop1
	DEVNAME=/dev/loop1
	DEVNAME=/dev/loop1

	# losetup -f zero2
	[   13.532368] loop2: detected capacity change from 0 to 40960
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop2
	DEVNAME=/dev/loop2

	# losetup -D
	DEVNAME=/dev/loop1
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop1
	DEVNAME=/dev/loop2
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop2
	DEVNAME=/dev/loop0
	DISK_MEDIA_CHANGE=1
	DEVNAME=/dev/loop0

Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-7-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:29 -06:00
Matteo Croce
e6138dc12d block: add a helper to raise a media changed event
Refactor disk_check_events() and move some code into disk_event_uevent().
Then add disk_force_media_change(), a helper which will be used by
devices to force issuing a DISK_EVENT_MEDIA_CHANGE event.

Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-6-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Matteo Croce
13927b31b1 block: export diskseq in sysfs
Add a new sysfs handle to export the new diskseq value.
Place it in <sysfs>/block/<disk>/diskseq and document it.

    $ grep . /sys/class/block/*/diskseq
    /sys/class/block/loop0/diskseq:13
    /sys/class/block/loop1/diskseq:14
    /sys/class/block/loop2/diskseq:5
    /sys/class/block/loop3/diskseq:6
    /sys/class/block/ram0/diskseq:1
    /sys/class/block/ram1/diskseq:2
    /sys/class/block/vda/diskseq:7

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-5-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Matteo Croce
7957d93bf3 block: add ioctl to read the disk sequence number
Add a new BLKGETDISKSEQ ioctl which retrieves the disk sequence number
from the genhd structure.

    # ./getdiskseq /dev/loop*
    /dev/loop0:     13
    /dev/loop0p1:   13
    /dev/loop0p2:   13
    /dev/loop0p3:   13
    /dev/loop1:     14
    /dev/loop1p1:   14
    /dev/loop1p2:   14
    /dev/loop2:     5
    /dev/loop3:     6

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-4-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Matteo Croce
87eb710747 block: export the diskseq in uevents
Export the newly introduced diskseq in uevents:

    $ udevadm info /sys/class/block/* |grep -e DEVNAME -e DISKSEQ
    E: DEVNAME=/dev/loop0
    E: DISKSEQ=1
    E: DEVNAME=/dev/loop1
    E: DISKSEQ=2
    E: DEVNAME=/dev/loop2
    E: DISKSEQ=3
    E: DEVNAME=/dev/loop3
    E: DISKSEQ=4
    E: DEVNAME=/dev/loop4
    E: DISKSEQ=5
    E: DEVNAME=/dev/loop5
    E: DISKSEQ=6
    E: DEVNAME=/dev/loop6
    E: DISKSEQ=7
    E: DEVNAME=/dev/loop7
    E: DISKSEQ=8
    E: DEVNAME=/dev/nvme0n1
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p1
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p2
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p3
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p4
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p5
    E: DISKSEQ=9
    E: DEVNAME=/dev/sda
    E: DISKSEQ=10
    E: DEVNAME=/dev/sda1
    E: DISKSEQ=10
    E: DEVNAME=/dev/sda2
    E: DISKSEQ=10

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-3-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Matteo Croce
cf17994855 block: add disk sequence number
Associating uevents with block devices in userspace is difficult and racy:
the uevent netlink socket is lossy, and on slow and overloaded systems
has a very high latency.
Block devices do not have exclusive owners in userspace, any process can
set one up (e.g. loop devices). Moreover, device names can be reused
(e.g. loop0 can be reused again and again). A userspace process setting
up a block device and watching for its events cannot thus reliably tell
whether an event relates to the device it just set up or another earlier
instance with the same name.

Being able to set a UUID on a loop device would solve the race conditions.
But it does not allow to derive orderings from uevents: if you see a
uevent with a UUID that does not match the device you are waiting for,
you cannot tell whether it's because the right uevent has not arrived yet,
or it was already sent and you missed it. So you cannot tell whether you
should wait for it or not.

Associating a unique, monotonically increasing sequential number to the
lifetime of each block device, which can be retrieved with an ioctl
immediately upon setting it up, allows to solve the race conditions with
uevents, and also allows userspace processes to know whether they should
wait for the uevent they need or if it was dropped and thus they should
move on.

Additionally, increment the disk sequence number when the media change,
i.e. on DISK_EVENT_MEDIA_CHANGE event.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-2-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
2164877c7f block: remove cmdline-parser.c
cmdline-parser.c is only used by the cmdline faux partition format,
so merge the code into that and avoid an indirect call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210728053756.409654-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
abd2864a3e block: remove disk_name()
Remove the disk_name function now that all users are gone.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
1d7035478f block: simplify disk name formatting in check_partition
disk_name for partition 0 just copies out the disk_name field.  Replace
the call to disk_name with a %s format specifier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
453b8ab696 block: simplify printing the device names disk_stack_limits
Printk ->disk_name directly for the disk and use the %pg format specifier
for the block device, which is equivalent to a bdevname call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
a291bb43e5 block: use the %pg format specifier in show_partition
Simplify printing the partition name by using the %pg format specifier
that is equivalent to a bdevname call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
a9e7bc3de4 block: use the %pg format specifier in printk_all_partitions
Simplify printing the partition name by using the %pg format specifier
that is equivalent to a bdevname call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Abd-Alrhman Masalkhi
26e2d7a362 block: reduce stack usage in diskstats_show
I have compiled the kernel with a cross compiler "hppa-linux-gnu-" v9.3.0
on x86-64 host machine. I got the following warning:

block/genhd.c: In function ‘diskstats_show’:
block/genhd.c:1227:1: warning: the frame size of 1688 bytes is larger
than 1280 bytes [-Wframe-larger-than=]
 1227  |  }

By Reduced the stack footprint by using the %pg printk specifier instead
of disk_name to remove the need for the on-stack buffer.

Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
2f4731dcd0 block: remove bdput
Now that we've stopped using inode references for anything meaninful
in the block layer get rid of the helper to put it and just open code
the call to iput on the block_device inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
14cf1dbb55 block: remove bdgrab
All callers are gone, and no one should grab a pure inode reference to
a block device anymore.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210722075402.983367-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
4b2731226d loop: don't grab a reference to the block device
The whole device block device won't be removed while the disk is still
alive, so don't bother to grab a reference to it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Ming Lei <ming.lei@rehat.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
9d3b881389 block: change the refcounting for partitions
Instead of acquiring an inode reference on open make sure partitions
always hold device model references to the disk while alive, and switch
open to grab only a device model reference to the opened block device.
If that is a partition the disk reference is transitively held by the
partition already.

Link: https://lore.kernel.org/r/20210722075402.983367-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
0468c53234 block: allocate bd_meta_info later in add_partitions
Move the allocation of bd_meta_info after initializing the struct device
to avoid the special bdput error handling path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210722075402.983367-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
d7a66574b3 block: unhash the whole device inode earlier
Unhash the whole device inode early in del_gendisk.  This allows to
remove the first GENHD_FL_UP check in the open path as we simply
won't find a just removed inode.  The second non-racy check after
taking open_mutex is still kept.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210722075402.983367-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
a45e43cad7 block: assert the locking state in delete_partition
Add a lockdep assert instead of the outdated locking comment.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
503469b5b3 block: use bvec_kmap_local in bio_integrity_process
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
8aec120a9c block: use bvec_kmap_local in t10_pi_type1_{prepare,complete}
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
4aebe8596a block: use memcpy_from_bvec in __blk_queue_bounce
Rewrite the actual bounce buffering loop in __blk_queue_bounce to that
the memcpy_to_bvec helper can be used to perform the data copies.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
d24920e20c block: use memcpy_from_bvec in bio_copy_kern_endio_read
Use memcpy_from_bvec instead of open coding the logic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
f434cdc78e block: use memcpy_to_bvec in copy_to_high_bio_irq
Use memcpy_to_bvec instead of opencoding the logic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:28 -06:00
Christoph Hellwig
f8b679a070 block: rewrite bio_copy_data_iter to use bvec_kmap_local and memcpy_to_bvec
Use the proper helpers instead of open coding the copy.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Christoph Hellwig
bda135d9c0 block: remove bvec_kmap_irq and bvec_kunmap_irq
These two helpers are entirely unused now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727055646.118787-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Christoph Hellwig
6e0a48552b ps3disk: use memcpy_{from,to}_bvec
Use the bvec helpers instead of open coding the copy.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20210727055646.118787-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Christoph Hellwig
18a6234ccf dm-writecache: use bvec_kmap_local instead of bvec_kmap_irq
There is no need to disable interrupts in bio_copy_block, and the local
only mappings helps to avoid any sort of problems with stray writes
into the bio data.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210727055646.118787-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Christoph Hellwig
732022b86a rbd: use memzero_bvec
Use memzero_bvec instead of reimplementing it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210727055646.118787-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Christoph Hellwig
ab6c340eea block: use memzero_page in zero_fill_bio
Use memzero_bvec to zero each segment in the bio instead of manually
mapping and zeroing the data.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210727055646.118787-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Christoph Hellwig
f93a181af4 bvec: add memcpy_{from,to}_bvec and memzero_bvec helper
Add helpers to perform common memory operation on a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210727055646.118787-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Christoph Hellwig
e6e7471706 bvec: add a bvec_kmap_local helper
Add a helper to call kmap_local_page on a bvec.  There is no need for
an unmap helper given that kunmap_local accept any address in the mapped
page.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210727055646.118787-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Christoph Hellwig
e45cef51db bvec: fix the include guards for bvec.h
Fix the include guards to match the file naming.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210727055646.118787-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Christoph Hellwig
4c7251e1b5 MIPS: don't include <linux/genhd.h> in <asm/mach-rc32434/rb.h>
There is no need to include genhd.h from a random arch header, and not
doing so prevents the possibility for nasty include loops.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210727055646.118787-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Oliver Hartkopp
06447ae5e3 ioprio: move user space relevant ioprio bits to UAPI includes
systemd added a modified copy of include/linux/ioprio.h into its
code to get the relevant content definitions for the exposed
ioprio_[get|set] system calls.

Move the user space relevant ioprio bits to the UAPI includes to be
able to use the ioprio_[get|set] syscalls as intended.

Cc: Kay Sievers <kay@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20210714195655.181943-1-socketcan@hartkopp.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02 13:37:27 -06:00
Zack Rusin
e89afb51f9 drm/vmwgfx: Fix a 64bit regression on svga3
Register accesses are always 4bytes, accidently this was changed to
a void pointer whwqich badly breaks 64bit archs when running on top
of svga3.

Fixes: 2cd80dbd35 ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-3-zackr@vmware.com
(cherry picked from commit 87360168759879d68550b0c052bbcc2a0339ff74)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-08-02 21:00:37 +02:00
Laibin Qiu
dc675a9712 f2fs: fix min_seq_blocks can not make sense in some scenes.
F2FS have dirty page count control for batched sequential
write in writepages, and get the value of min_seq_blocks by
blocks_per_seg * segs_per_sec(segs_per_sec defaults to 1).
But in some scenes we set a lager section size, Min_seq_blocks
will become too large to achieve the expected effect(eg. 4thread
sequential write, the number of merge requests will be reduced).

Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-02 11:24:26 -07:00
Chao Yu
2787991516 f2fs: fix to force keeping write barrier for strict fsync mode
[1] https://www.mail-archive.com/linux-f2fs-devel@lists.sourceforge.net/msg15126.html

As [1] reported, if lower device doesn't support write barrier, in below
case:

- write page #0; persist
- overwrite page #0
- fsync
 - write data page #0 OPU into device's cache
 - write inode page into device's cache
 - issue flush

If SPO is triggered during flush command, inode page can be persisted
before data page #0, so that after recovery, inode page can be recovered
with new physical block address of data page #0, however there may
contains dummy data in new physical block address.

Then what user will see is: after overwrite & fsync + SPO, old data in
file was corrupted, if any user do care about such case, we can suggest
user to use STRICT fsync mode, in this mode, we will force to use atomic
write sematics to keep write order in between data/node and last node,
so that it avoids potential data corruption during fsync().

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-02 11:24:26 -07:00
Chao Yu
277afbde6c f2fs: fix wrong checkpoint_changed value in f2fs_remount()
In f2fs_remount(), return value of test_opt() is an unsigned int type
variable, however when we compare it to a bool type variable, it cause
wrong result, fix it.

Fixes: 4354994f09 ("f2fs: checkpoint disabling")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-02 11:24:26 -07:00
Jaegeuk Kim
2e650912c0 f2fs: show sbi status in debugfs/f2fs/status
We need to get sbi->s_flag to understand the current f2fs status as well.
One example is SBI_NEED_FSCK.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-02 11:24:26 -07:00
Daeho Jeong
4931e0c93e f2fs: turn back remapped address in compressed page endio
Turned back the remmaped sector address to the address in the partition,
when ending io, for compress cache to work properly.

Fixes: 6ce19aff0b ("f2fs: compress: add compress_inode to cache
compressed blocks")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Hyeong Jun Kim <hj514.kim@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-02 11:24:25 -07:00
Daeho Jeong
093f0bac32 f2fs: change fiemap way in printing compression chunk
When we print out a discontinuous compression chunk, it shows like a
continuous chunk now. To show it more correctly, I've changed the way of
printing fiemap info like below. Plus, eliminated NEW_ADDR(-1) in fiemap
info, since it is not in fiemap user api manual.

Let's assume 16KB compression cluster.

<before>
   Logical          Physical         Length           Flags
0:  0000000000000000 00000002c091f000 0000000000004000 1008
1:  0000000000004000 00000002c0920000 0000000000004000 1008
  ...
9:  0000000000034000 0000000f8c623000 0000000000004000 1008
10: 0000000000038000 000000101a6eb000 0000000000004000 1008

<after>
0:  0000000000000000 00000002c091f000 0000000000004000 1008
1:  0000000000004000 00000002c0920000 0000000000004000 1008
  ...
9:  0000000000034000 0000000f8c623000 0000000000001000 1008
10: 0000000000035000 000000101a6ea000 0000000000003000 1008
11: 0000000000038000 000000101a6eb000 0000000000002000 1008
12: 000000000003a000 00000002c3544000 0000000000002000 1008

Flags
0x1000 => FIEMAP_EXTENT_MERGED
0x0008 => FIEMAP_EXTENT_ENCODED

Signed-off-by: Daeho Jeong <daehojeong@google.com>
Tested-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-02 11:24:25 -07:00
Jaegeuk Kim
b7ec206173 f2fs: do not submit NEW_ADDR to read node block
After the below patch, give cp is errored, we drop dirty node pages. This
can give NEW_ADDR to read node pages. Don't do WARN_ON() which gives
generic/475 failure.

Fixes: 28607bf3aa ("f2fs: drop dirty node pages when cp is in error status")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-02 11:24:25 -07:00
Fengnan Chang
7eab7a6968 f2fs: compress: remove unneeded read when rewrite whole cluster
when we overwrite the whole page in cluster, we don't need read original
data before write, because after write_end(), writepages() can help to
load left data in that cluster.

Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-02 11:24:25 -07:00
Mark Rutland
7672150301 arm64: kasan: mte: remove redundant mte_report_once logic
We have special logic to suppress MTE tag check fault reporting, based
on a global `mte_report_once` and `reported` variables. These can be
used to suppress calling kasan_report() when taking a tag check fault,
but do not prevent taking the fault in the first place, nor does they
affect the way we disable tag checks upon taking a fault.

The core KASAN code already defaults to reporting a single fault, and
has a `multi_shot` control to permit reporting multiple faults. The only
place we transiently alter `mte_report_once` is in lib/test_kasan.c,
where we also the `multi_shot` state as the same time. Thus
`mte_report_once` and `reported` are redundant, and can be removed.

When a tag check fault is taken, tag checking will be disabled by
`do_tag_recovery` and must be explicitly re-enabled if desired. The test
code does this by calling kasan_enable_tagging_sync().

This patch removes the redundant mte_report_once() logic and associated
variables.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20210714143843.56537-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-08-02 18:15:28 +01:00