As the Intel VT-d driver has switched to use the iommu_ops.map_pages()
callback, multiple pages of the same size will be mapped in a call.
There's no need to put the clflush'es in iotlb_sync_map() callback.
Move them back into __domain_mapping() to simplify the code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210720020615.4144323-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the map_pages() and unmap_pages() callback for the Intel IOMMU
driver to allow calls from iommu core to map and unmap multiple pages of
the same size in one call. With map/unmap_pages() implemented, the prior
map/unmap callbacks are deprecated.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210720020615.4144323-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pgsize bitmap is used to advertise the page sizes our hardware supports
to the IOMMU core, which will then use this information to split physically
contiguous memory regions it is mapping into page sizes that we support.
Traditionally the IOMMU core just handed us the mappings directly, after
making sure the size is an order of a 4KiB page and that the mapping has
natural alignment. To retain this behavior, we currently advertise that we
support all page sizes that are an order of 4KiB.
We are about to utilize the new IOMMU map/unmap_pages APIs. We could change
this to advertise the real page sizes we support.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210720020615.4144323-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1626683578-64214-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The tlv320aic31xx driver relies on regcache_sync() to restore the register
contents after going to _BIAS_OFF, for example during system suspend. This
does not work for the jack detection configuration since that is configured
via the same register that status is read back from so the register is
volatile and not cached. This can also cause issues during init if the jack
detection ends up getting set up before the CODEC is initially brought out
of _BIAS_OFF, we will reset the CODEC and resync the cache as part of that
process.
Fix this by explicitly reapplying the jack detection configuration after
resyncing the register cache during power on.
This issue was found by an engineer working off-list on a product
kernel, I just wrote up the upstream fix.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210723180200.25105-1-broonie@kernel.org
Cc: stable@vger.kernel.org
If people are going to insist on calling iommu_iova_to_phys()
pointlessly and expecting it to work, we can at least do ourselves a
favour by handling those cases in the core code, rather than repeatedly
across an inconsistent handful of drivers.
Since all the existing drivers implement the internal callback, and any
future ones are likely to want to work with iommu-dma which relies on
iova_to_phys a fair bit, we may as well remove that currently-redundant
check as well and consider it mandatory.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/f564f3f6ff731b898ff7a898919bf871c2c7745a.1626354264.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
sctp_inet6addr_event deletes 'addr' from 'local_addr_list' when setting
netdev down, but it is possible to delete the incorrect entry (match
the first one with the same ipaddr, but the different 'ifindex'), if
there are some netdevs with the same 'local-link' ipaddr added already.
It should delete the entry depending on 'sin6_addr' and 'sin6_scope_id'
both. otherwise, the endpoint will call 'sctp_sf_ootb' if it can't find
the according association when receives 'heartbeat', and finally will
reply 'abort'.
For example:
1.when linux startup
the entries in local_addr_list:
ifindex:35 addr:fe80::40:43ff:fe80:0 (eths0.201)
ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209)
ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210)
the route table:
local fe80::40:43ff:fe80:0 dev eths0.201
local fe80::40:43ff:fe80:0 dev eths0.209
local fe80::40:43ff:fe80:0 dev eths0.210
2.after 'ifconfig eths0.209 down'
the entries in local_addr_list:
ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209)
ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210)
the route table:
local fe80::40:43ff:fe80:0 dev eths0.201
local fe80::40:43ff:fe80:0 dev eths0.210
3.asoc not found for src:[fe80::40:43ff:fe80:0]:37381 dst:[:1]:53335
::1->fe80::40:43ff:fe80:0 HEARTBEAT
fe80::40:43ff:fe80:0->::1 ABORT
Signed-off-by: Chen Shen <peterchenshen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Assign dwmac5_est_irq_status to est_irq_status callback function for
GMAC 4.10 and 5.10. With this, EST related interrupts could be handled
properly.
Fixes: e49aa315cb ("net: stmmac: EST interrupts handling and error reporting")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Acked-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We only ever now set strict mode enabled in iommu_set_dma_strict(), so
just remove the argument.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-7-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make IOMMU_DEFAULT_LAZY default for when AMD_IOMMU config is set, which
matches current behaviour.
For "fullflush" param, just call iommu_set_dma_strict(true) directly.
Since we get a strict vs lazy mode print already in iommu_subsys_init(),
and maintain a deprecation print when "fullflush" param is passed, drop the
prints in amd_iommu_init_dma_ops().
Finally drop global flag amd_iommu_unmap_flush, as it has no longer has any
purpose.
[jpg: Rebase for relocated file and drop amd_iommu_unmap_flush]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1626088340-5838-6-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make IOMMU_DEFAULT_LAZY default for when INTEL_IOMMU config is set,
as is current behaviour.
Also delete global flag intel_iommu_strict:
- In intel_iommu_setup(), call iommu_set_dma_strict(true) directly. Also
remove the print, as iommu_subsys_init() prints the mode and we have
already marked this param as deprecated.
- For cap_caching_mode() check in intel_iommu_setup(), call
iommu_set_dma_strict(true) directly; also reword the accompanying print
with a level downgrade and also add the missing '\n'.
- For Ironlake GPU, again call iommu_set_dma_strict(true) directly and
keep the accompanying print.
[jpg: Remove intel_iommu_strict]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-5-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the
opportunity to set {lazy|strict} mode as default at build time. Then put
the two config options in an choice, as they are mutually exclusive.
[jpg: Make choice between strict and lazy only (and not passthrough)]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-4-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As well as the default domain type, it's useful to know whether strict
or lazy for DMA domains, so add this info in a separate print.
The (stict/lazy) mode may be also set via iommu.strict earlyparm, but
this will be processed prior to iommu_subsys_init(), so that print will be
accurate for drivers which don't set the mode via custom means.
For the drivers which set the mode via custom means - AMD and Intel drivers
- they maintain prints to inform a change in policy or that custom cmdline
methods to change policy are deprecated.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-3-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the x86 drivers support iommu.strict, deprecate the custom
methods.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-2-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add trace event to report samples and their timestamp coming from the
EC. It allows to check if the timestamps are correct and the filter is
working correctly without introducing too much latency.
To enable these events:
cd /sys/kernel/debug/tracing/
echo 1 > events/cros_ec/enable
echo 0 > events/cros_ec/cros_ec_request_start/enable
echo 0 > events/cros_ec/cros_ec_request_done/enable
echo 1 > tracing_on
cat trace_pipe
Observe event flowing:
irq/105-chromeo-95 [000] .... 613.659758: cros_ec_sensorhub_timestamp: ...
irq/105-chromeo-95 [000] .... 613.665219: cros_ec_sensorhub_filter: dx: ...
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Use dynamic interrupt moderation library to implement coalesce
adaptive feature for nfp driver.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packets are aggregated over the MBIM link and currently the MHI net
device will count each aggregated packet rather then the actual
packets themselves.
If a protocol handler module is specified, use that to count the
packets rather than directly in the MHI net device. This is in line
with the behaviour of the USB net cdc_mbim driver.
Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the code by removing unnecessary label and returning directly.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: hns3: add support devlink
This series adds devlink support for the HNS3 ethernet driver.
change log:
V2 -> V3:
1. remove two patches of setting rx/tx buffer size by devlink param.
V1 -> V2:
1. add more detailed descriptions of parameters in document hns3.rst.
RFC -> V1:
1. use DEVLINK_INFO_VERSION_GENERIC_FW instead of "fw-version".
2. add devlink documentation for hns3 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink reload support for HNS3 ethernet VF driver.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink reload support for HNS3 ethernet PF driver.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink get info support for HNS3 ethernet VF driver.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink get info support for HNS3 ethernet PF driver.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink register support for HNS3 ethernet VF driver.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink register support for HNS3 ethernet PF driver.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a file to document devlink support for hns3 driver, now support devlink
info and devlink reload.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
AMD systems with uPEP HID AMDI007 should be using revision 2 and
the AMD method.
Fixes: 8fbd6c15ea ("ACPI: PM: Adjust behavior for field problems on AMD systems")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Implement the map_pages() callback for the ARM SMMU driver
to allow calls from iommu_map to map multiple pages of
the same size in one call. Also, remove the map() callback
for the ARM SMMU driver, as it will no longer be used.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-16-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the unmap_pages() callback for the ARM SMMU driver
to allow calls from iommu_unmap to unmap multiple pages of
the same size in one call. Also, remove the unmap() callback
for the SMMU driver, as it will no longer be used.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-15-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the unmap_pages() callback for the ARM LPAE io-pgtable
format.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-11-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The PTE methods currently operate on a single entry. In preparation
for manipulating multiple PTEs in one map or unmap call, allow them
to handle multiple PTEs.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-10-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since iommu_pgsize can calculate how many pages of the
same size can be mapped/unmapped before the next largest
page size boundary, add support for invoking an IOMMU
driver's map_pages() callback, if it provides one.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1623850736-389584-9-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extend iommu_pgsize() to populate an optional 'count' parameter so that
we can direct unmapping operation to the ->unmap_pages callback if it
has been provided by the driver.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1623850736-389584-8-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The 'addr_merge' parameter to iommu_pgsize() is a fabricated address
intended to describe the alignment requirements to consider when
choosing an appropriate page size. On the iommu_map() path, this address
is the logical OR of the virtual and physical addresses.
Subsequent improvements to iommu_pgsize() will need to check the
alignment of the virtual and physical components of 'addr_merge'
independently, so pass them in as separate parameters and reconstruct
'addr_merge' locally.
No functional change.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1623850736-389584-7-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Avoid the potential for shifting values by amounts greater than the
width of their type by using a bitmap to compute page size in
iommu_pgsize().
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1623850736-389584-6-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a callback for IOMMU drivers to provide a path for the
IOMMU framework to call into an IOMMU driver, which can
call into the io-pgtable code, to map a physically contiguous
rnage of pages of the same size.
For IOMMU drivers that do not specify a map_pages() callback,
the existing logic of mapping memory one page block at a time
will be used.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-5-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Mapping memory into io-pgtables follows the same semantics
that unmapping memory used to follow (i.e. a buffer will be
mapped one page block per call to the io-pgtable code). This
means that it can be optimized in the same way that unmapping
memory was, so add a map_pages() callback to the io-pgtable
ops structure, so that a range of pages of the same size
can be mapped within the same call.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-4-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a callback for IOMMU drivers to provide a path for the
IOMMU framework to call into an IOMMU driver, which can call
into the io-pgtable code, to unmap a virtually contiguous
range of pages of the same size.
For IOMMU drivers that do not specify an unmap_pages() callback,
the existing logic of unmapping memory one page block at a time
will be used.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-3-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The io-pgtable code expects to operate on a single block or
granule of memory that is supported by the IOMMU hardware when
unmapping memory.
This means that when a large buffer that consists of multiple
such blocks is unmapped, the io-pgtable code will walk the page
tables to the correct level to unmap each block, even for blocks
that are virtually contiguous and at the same level, which can
incur an overhead in performance.
Introduce the unmap_pages() page table op to express to the
io-pgtable code that it should unmap a number of blocks of
the same size, instead of a single block. Doing so allows
multiple blocks to be unmapped in one call to the io-pgtable
code, reducing the number of page table walks, and indirect
calls.
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/1623850736-389584-2-git-send-email-quic_c_gdjako@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 3370155737 ("printk: Userspace format indexing support") turned
printk() into a macro, but left the kerneldoc comment for it with the (now)
_printk() function, resulting in this docs-build warning:
kernel/printk/printk.c:1: warning: 'printk' not found
Move the kerneldoc comment back next to the (now) macro it's meant to
describe and have the docs build find it there.
Fixes: 3370155737 ("printk: Userspace format indexing support")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87o8aqt7qn.fsf@meer.lwn.net
The commit 3370155737 ("printk: Userspace format indexing support")
triggered the following build failure:
kernel/printk/index.c:140:6: warning: no previous prototype for ‘pi_create_file’ [-Wmissing-prototypes]
void pi_create_file(struct module *mod)
^~~~~~~~~~~~~~
kernel/printk/index.c:146:6: warning: no previous prototype for ‘pi_remove_file’ [-Wmissing-prototypes]
void pi_remove_file(struct module *mod)
^~~~~~~~~~~~~~
Fixes: 3370155737 ("printk: Userspace format indexing support")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Chris Down <chris@chrisdown.name>
[pmladek@suse.com: Let the compiler decide about inlining.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/lkml/YPql089IwSpudw%2F1@alley/
The list_for_each_entry() iterator, "pos" in this code, can never be
NULL so the warning will never be printed.
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt
in intel_bios.c") moved the workaround for broken or missing VBT to
intel_bios.c. However is_port_valid() only protects the handling of
different skus of the same display version. Since in
intel_setup_outputs() we share the code path with version 9, this would
also create port F for SKL/KBL, which does not exist.
Missing VBT can be reproduced when starting a headless QEMU with no
opregion available.
Avoid the issue by splitting versions 9 and 10 in intel_setup_outputs(),
which also makes it more clear what code path it's taking for each
version.
v2: move generic display version after Geminilake since that one has
a different set of outputs
Fixes: 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt in intel_bios.c")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210722232922.3796835-1-lucas.demarchi@intel.com
(cherry picked from commit ec387b8ff8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We were using GRAPHICS_VER() to handle SKL_DFSM register, which means we
were not handling GLK correctly since that has GRAPHICS_VER == 9, but
DISPLAY_VER == 10. Switch the entire branch to check DISPLAY_VER
which makes it more in line with Bspec.
Even though the Bspec has an exception for RKL in
TGL_DFSM_PIPE_D_DISABLE, we don't have to do anything as the bit has
disable semantic and RKL doesn't have pipe D.
Bspec: 50075, 7548
Fixes: 2b5a4562ed ("drm/i915/display: Simplify GLK display version tests")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723234352.214459-1-lucas.demarchi@intel.com
(cherry picked from commit 4fd177288a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>