Adding bpf_get_func_ip helper for BPF_PROG_TYPE_TRACING programs,
specifically for all trampoline attach types.
The trampoline's caller IP address is stored in (ctx - 8) address.
so there's no reason to actually call the helper, but rather fixup
the call instruction and return [ctx - 8] value directly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-4-jolsa@kernel.org
- fix the read and write iterators (Bart Van Assche)
-----BEGIN PGP SIGNATURE-----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=sDu1
-----END PGP SIGNATURE-----
Merge tag 'configfs-5.13-1' of git://git.infradead.org/users/hch/configfs
Pull configfs fix from Christoph Hellwig:
- fix the read and write iterators (Bart Van Assche)
* tag 'configfs-5.13-1' of git://git.infradead.org/users/hch/configfs:
configfs: fix the read and write iterators
* fbdev: Avoid use-after-free by not deleting current video mode
* ttm: Avoid NULL-ptr deref in ttm_range_man_fini()
* vmwgfx: Fix a merge commit
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmDv8eAACgkQaA3BHVML
eiOjIwgAgN7WLhSA3FjdfxIsPCeEleeysc+gdIHEi2q5BOFQa3zmjB+D+a8efqsF
pp5VTGvR2BH+v5qNnxKCRVvtit5zvcipIreB0k/dRBvCtZ/iDeDjxVlqvuNud7/9
ZMCuUy4vv4VhcXxALoKo6ADRTITBWWGmtbkhgPRQT8kaT3v8M71x4TU9cH/oyn1Y
DBRb514WnlgbuYtouWtYhR9GhPHj1dIL3XjklHaOeOUN+yOww5P43iT2UktMxY6e
rJkMK9gNR9Tjhb9FpXQmArgCJbiZClu/ndy5P7EZcibskrUrOIbmdKFsfRshpGxI
4GTW3aXbXbO9RHz2qg7v8YTrbX/YSw==
=c9Dy
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-07-15' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull (less than what git shortlog provides):
* fbdev: Avoid use-after-free by not deleting current video mode
* ttm: Avoid NULL-ptr deref in ttm_range_man_fini()
* vmwgfx: Fix a merge commit
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YO/yoFO+iSEqnIH0@linux-uq9g
This contains a couple of fixes from Uwe that I missed for v5.14-rc1.
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmDukoMZHHRoaWVycnku
cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoSe0D/wNNdTHdI3uzn/jhU6W1Hmw
CHU0nza4wh/n445VYc/0+0dFxMEqyI/vwGw79xcpTb/drydklJ9FrpXqSG4Tp2T0
cW/Br3w89yAtNvO/gsbro+ckgHfhLO+O1hZ9OtpbsqKMgnXWwky5qc7mfojUaAEu
aCBnbJ0f7BVm4BHIjQirbys5txs/tnExtuOPjGRYs5/UP2jLi8mqHlt3/sUHsT49
u/x1nhGp3/NReJUou0CKvmHS1srNn7c8dGCINR1cPv57WdWwABXSSAp7iRYyqR+g
/4dIeo5ToA7l3c5KEmcwA/d1vNlDB6B6YI6lgiBthxTnS+F07nEv1IJCbb1RzSXJ
8Sg8az8Vfza/Dv/TB5Tmn01YNPFXa+XX+f3mP9syuYUd3G9xf8+QekkGK4hXSGIi
ZkeoozwRjHy0TA5g0DqynciAjEYBV2DqBrBhdFVaDlCzEdPuSNY2Y4B5HXHC/ZM0
2i5e4+yd1cOrsW0Pzx02wQxlAl6ZE0uM6HJZkMSTzYI+zU85izQurA2hXyHPjopF
tHK0HZRKa4Xg+ua+85TTjpKgQnQcZgLUNgtrbZ7mdbZO0S2leAQs3Sa0UBGiSxO5
UPj1DUVpmN7uw95Qm/giD4NndEtlsit7DMY2pBrOt+NUPfM5yiLXhSB8C8+BJFVp
xNfpu1LWd8l5OVd4txEpLA==
=ij9H
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"A couple of fixes from Uwe that I missed for v5.14-rc1"
* tag 'pwm/for-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: ep93xx: Ensure configuring period and duty_cycle isn't wrongly skipped
pwm: berlin: Ensure configuring period and duty_cycle isn't wrongly skipped
pwm: tiecap: Ensure configuring period and duty_cycle isn't wrongly skipped
pwm: spear: Ensure configuring period and duty_cycle isn't wrongly skipped
pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skipped
Enabling BPF_TRAMP_F_IP_ARG for trampolines that actually need it.
The BPF_TRAMP_F_IP_ARG adds extra 3 instructions to trampoline code
and is used only by programs with bpf_get_func_ip helper, which is
added in following patch and sets call_get_func_ip bit.
This patch ensures that BPF_TRAMP_F_IP_ARG flag is used only for
trampolines that have programs with call_get_func_ip set.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-3-jolsa@kernel.org
Storing caller's ip in trampoline's stack. Trampoline programs
can reach the IP in (ctx - 8) address, so there's no change in
program's arguments interface.
The IP address is takes from [fp + 8], which is return address
from the initial 'call fentry' call to trampoline.
This IP address will be returned via bpf_get_func_ip helper
helper, which is added in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-2-jolsa@kernel.org
When sending the compression context to some servers, they rejected
the SMB3.1.1 negotiate protocol because they expect the compression
context to have a data length of a multiple of 8.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We have a few ref counters srv_count, ses_count and
tc_count which we use for ref counting. Added a WARN_ON
during the decrement of each of these counters to make
sure that they don't go below their minimum values.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although it is unlikely to be have ended up with a null
session pointer calling cifs_try_adding_channels in cifs_mount.
Coverity correctly notes that we are already checking for
it earlier (when we return from do_dfs_failover), so at
a minimum to clarify the code we should make sure we also
check for it when we exit the loop so we don't end up calling
cifs_try_adding_channels or mount_setup_tlink with a null
ses pointer.
Addresses-Coverity: 1505608 ("Derefernce after null check")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
When there is no cached DFS referral of tcon->dfs_path, then reconnect
to same share.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 by defining
__GCC4_has_attribute___no_sanitize_coverage__.
Fixes: 540540d06e ("kcov: add __no_sanitize_coverage to fix noinstr for all architectures")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The blocks containing the bad block table can become bad as well. So
make sure to skip any blocks that are marked bad when searching for the
bad block table.
Otherwise in very rare cases where two BBT blocks wear out it might
happen that an obsolete BBT is used instead of a newer available
version.
This only applies to drivers which make use of a bad block marker in flash.
Other drivers won't be able to identify bad BBT blocks and thus can't skip
these.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210625123821.207458-1-s.riedmueller@phytec.de
"PAGESIZE / 512" is the number of ECC chunks.
"ECC_BYTES" is the number of bytes needed to store a single ECC code.
"2" is the space reserved by the bad block marker.
"2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal
than the total number of OOB bytes, otherwise it won't fit.
Fix the equation by substituting s/>=/<=/.
Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com
Erasing an AMD linear flash card (AM29F016D) crashes after the first
sector has been erased. Likewise, writing to it crashes after two bytes
have been written. The reason is a missing check for a null pointer -
the cmdset_priv field is not set for this type of card.
Fixes: 4844ef8030 ("mtd: cfi_cmdset_0002: Add support for polling status register")
Signed-off-by: Andreas Persson <andreasp56@outlook.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/DB6P189MB05830B3530B8087476C5CFE4C1159@DB6P189MB0583.EURP189.PROD.OUTLOOK.COM
There are flash drivers which registers the OTP callbacks although the
flash doesn't support OTP regions and return -ENODATA for these
callbacks if there is no OTP. If this happens, the probe of the whole
flash will fail. Fix it by handling the ENODATA return code and skip
the OTP region nvmem setup.
Fixes: 4b361cfa86 ("mtd: core: add OTP nvmem provider support")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210707135359.32398-1-michael@walle.cc
Smatch complains that zero length read/writes will lead to an
uninitalized return value. I don't know if that's possible, but
it's nicer to return a zero literal anyway so let's do that.
Fixes: 88d1250267 ("mtd: devices: add support for microchip 48l640 EERAM")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/YMyir961W28TX5dT@mwanda
Syzbot reported a circular locking dependency:
https://syzkaller.appspot.com/bug?id=7bd106c28e846d1023d4ca915718b1a0905444cb
This happens because of the following lock dependencies:
1. loop_ctl_mutex -> bdev->bd_mutex (when loop_control_ioctl calls
loop_remove, which then calls del_gendisk; this also happens in
loop_exit which eventually calls loop_remove)
2. bdev->bd_mutex -> mtd_table_mutex (when blkdev_get_by_dev calls
__blkdev_get, which then calls blktrans_open)
3. mtd_table_mutex -> major_names_lock (when register_mtd_blktrans
calls __register_blkdev)
4. major_names_lock -> loop_ctl_mutex (when blk_request_module calls
loop_probe)
Hence there's an overall dependency of:
loop_ctl_mutex ----------> bdev->bd_mutex
^ |
| |
| v
major_names_lock <--------- mtd_table_mutex
We can break this circular dependency by holding mtd_table_mutex only
for the required critical section in register_mtd_blktrans. This
avoids the mtd_table_mutex -> major_names_lock dependency.
Reported-and-tested-by: syzbot+6a8a0d93c91e8fbf2e80@syzkaller.appspotmail.com
Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210617160904.570111-1-desmondcheongzx@gmail.com
Check for whether of_property_count_elems_of_size() returns a negative
error code.
Fixes: 13b8976827 ("mtd: rawnand: Add support for secure regions in NAND memory")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/YMtQFXE0F1w7mUh+@mwanda
Add support for the bus clock for the serial flash controller on the
rk3036. Taken from the Rockchip BSP kernel but not tested on real
hardware (as I lack a 3036 based SoC to test).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210713094718.1709-2-jon.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add dt-binding for hclk_sfc on rk3036
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210713094718.1709-1-jon.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The compatible strings below were added to
rockchip-io-domain.txt, but never added to the device tree,
so add io-domains nodes to rv1108.dtsi
"rockchip,rv1108-io-voltage-domain"
"rockchip,rv1108-pmu-io-voltage-domain"
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210625111746.6269-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The compatible string below was added to
rockchip-io-domain.txt, but never added to the device tree,
so add a io-domains node to rk3188.dtsi
"rockchip,rk3188-io-voltage-domain"
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210625111746.6269-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rockchip-io-domain.txt file was converted to YAML.
IO Voltage Domain nodes are sub nodes of grf and pmugrf nodes.
Add rockchip-io-domain.yaml object to the grf.yaml file.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210625111746.6269-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Current dts files with 'io-domains' nodes are manually verified.
In order to automate this process rockchip-io-domain.txt has to be
converted to YAML.
Changed:
Add supply properties for:
rockchip,rk3328-io-voltage-domain
rockchip,rv1108-io-voltage-domain
rockchip,rv1108-pmu-io-voltage-domain
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210625111746.6269-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Andrii Nakryiko says:
====================
pull-request: bpf 2021-07-15
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 37 insertions(+), 15 deletions(-).
The main changes are:
1) Fix NULL pointer dereference in BPF_TEST_RUN for BPF_XDP_DEVMAP and
BPF_XDP_CPUMAP programs, from Xuan Zhuo.
2) Fix use-after-free of net_device in XDP bpf_link, from Xuan Zhuo.
3) Follow-up fix to subprog poke descriptor use-after-free problem, from
Daniel Borkmann and John Fastabend.
4) Fix out-of-range array access in s390 BPF JIT backend, from Colin Ian King.
5) Fix memory leak in BPF sockmap, from John Fastabend.
6) Fix for sockmap to prevent proc stats reporting bug, from John Fastabend
and Jakub Sitnicki.
7) Fix NULL pointer dereference in bpftool, from Tobias Klauser.
8) AF_XDP documentation fixes, from Baruch Siach.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hi Linus,
Please, pull the following patches that fix many fall-through
warnings when building with Clang and -Wimplicit-fallthrough.
This pull-request also contains the patch for Makefile that enables
-Wimplicit-fallthrough for Clang, globally.
It's also important to notice that since we have adopted the use of
the pseudo-keyword macro fallthrough; we also want to avoid having
more /* fall through */ comments being introduced. Notice that contrary
to GCC, Clang doesn't recognize any comments as implicit fall-through
markings when the -Wimplicit-fallthrough option is enabled. So, in
order to avoid having more comments being introduced, we have to use
the option -Wimplicit-fallthrough=5 for GCC, which similar to Clang,
will cause a warning in case a code comment is intended to be used
as a fall-through marking. The patch for Makefile also enforces this.
We had almost 4,000 of these issues for Clang in the beginning,
and there might be a couple more out there when building some
architectures with certain configurations. However, with the
recent fixes I think we are in good shape and it is now possible
to enable -Wimplicit-fallthrough for Clang. :)
Thanks!
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmDvPV0ACgkQRwW0y0cG
2zGJ1xAAsbSN8I+ESxFCKi4UwQC71988isb0rHGL6rQPBbEYD2bbI+82aGu6WH8z
2ZVQZa5x3tUoIsqR2GMK5Npn1dFvuNWGZkYzlgjAp+FgzaULCLUc4NW9DEWU/Kbd
UBz8ilXL7tUAlDalUYjXAVVTxMnRTZ+BDCbEmIdRZ5X/pMlD2xHeMGG4kh8/cHjJ
+mqFwCFPZoyLJzPBnm37OEfIr8JxrLZAo1gfmz5sxfmBdYDY3hjV/BVgP8h0bkY9
ITaq0LMEAPMXvU+4DP3DxuqzRr9COYMcddmbaWwsXPd7UAuoXwGLvqx7JE0QqY3g
J80w4/hXqEa4o4/fUAsfjYEQoNTEnhl0iGskBJD2xy5Lj17/m4aOSL44ibr2Ag67
yfJPWi9tooYELEGNobPVHPuqk4ts6amKTOKqHWMBEcTEOIGzaGWPEjRoyaMivfZ3
G3ZbEPEYERcJRizm63UbciLeslGsxb6tdYQEy5VI8Wa7caz9Ci9HT+jjS7Vm2fuq
1zg+vIgwuSxvwxrSV/PDTRcQm9EM/MoRL0D4jbr7gtYD6KNwH8Vo6M21CoaB9gH3
FgMiCT4zy9KiONjVDJKkjtzuk+9OwpI5AAg0/fAQ4Ak9TzUN3Xfg7HpytETCIJ0Z
Ii3Jqwe+3IRTNq94ZTIiX/0hT7i5GsPxUfPzI2vwttCJn9ctUcM=
=XVNN
-----END PGP SIGNATURE-----
Merge tag 'Wimplicit-fallthrough-clang-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"This fixes many fall-through warnings when building with Clang and
-Wimplicit-fallthrough, and also enables -Wimplicit-fallthrough for
Clang, globally.
It's also important to notice that since we have adopted the use of
the pseudo-keyword macro fallthrough, we also want to avoid having
more /* fall through */ comments being introduced. Contrary to GCC,
Clang doesn't recognize any comments as implicit fall-through markings
when the -Wimplicit-fallthrough option is enabled.
So, in order to avoid having more comments being introduced, we use
the option -Wimplicit-fallthrough=5 for GCC, which similar to Clang,
will cause a warning in case a code comment is intended to be used as
a fall-through marking. The patch for Makefile also enforces this.
We had almost 4,000 of these issues for Clang in the beginning, and
there might be a couple more out there when building some
architectures with certain configurations. However, with the recent
fixes I think we are in good shape and it is now possible to enable
the warning for Clang"
* tag 'Wimplicit-fallthrough-clang-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits)
Makefile: Enable -Wimplicit-fallthrough for Clang
powerpc/smp: Fix fall-through warning for Clang
dmaengine: mpc512x: Fix fall-through warning for Clang
usb: gadget: fsl_qe_udc: Fix fall-through warning for Clang
powerpc/powernv: Fix fall-through warning for Clang
MIPS: Fix unreachable code issue
MIPS: Fix fall-through warnings for Clang
ASoC: Mediatek: MT8183: Fix fall-through warning for Clang
power: supply: Fix fall-through warnings for Clang
dmaengine: ti: k3-udma: Fix fall-through warning for Clang
s390: Fix fall-through warnings for Clang
dmaengine: ipu: Fix fall-through warning for Clang
iommu/arm-smmu-v3: Fix fall-through warning for Clang
mmc: jz4740: Fix fall-through warning for Clang
PCI: Fix fall-through warning for Clang
scsi: libsas: Fix fall-through warning for Clang
video: fbdev: Fix fall-through warning for Clang
math-emu: Fix fall-through warning
cpufreq: Fix fall-through warning for Clang
drm/msm: Fix fall-through warning in msm_gem_new_impl()
...
Alexei Starovoitov says:
====================
The first request to support timers in bpf was made in 2013 before sys_bpf
syscall was added. That use case was periodic sampling. It was address with
attaching bpf programs to perf_events. Then during XDP development the timers
were requested to do garbage collection and health checks. They were worked
around by implementing timers in user space and triggering progs with
BPF_PROG_RUN command. The user space timers and perf_event+bpf timers are not
armed by the bpf program. They're done asynchronously vs program execution.
The XDP program cannot send a packet and arm the timer at the same time. The
tracing prog cannot record an event and arm the timer right away. This large
class of use cases remained unaddressed. The jiffy based and hrtimer based
timers are essential part of the kernel development and with this patch set
the hrtimer based timers will be available to bpf programs.
TLDR: bpf timers is a wrapper of hrtimers with all the extra safety added
to make sure bpf progs cannot crash the kernel.
v6->v7:
- address Andrii's comments and add his Acks.
v5->v6:
- address code review feedback from Martin and add his Acks.
- add usercnt > 0 check to bpf_timer_init and remove timers_cancel_and_free
second loop in map_free callbacks.
- add cond_resched_rcu.
v4->v5:
- Martin noticed the following issues:
. prog could be reallocated bpf_patch_insn_data().
Fixed by passing 'aux' into bpf_timer_set_callback, since 'aux' is stable
during insn patching.
. Added missing rcu_read_lock.
. Removed redundant record_map.
- Discovered few bugs with stress testing:
. One cpu does htab_free_prealloced_timers->bpf_timer_cancel_and_free->hrtimer_cancel
while another is trying to do something with the timer like bpf_timer_start/set_callback.
Those ops try to acquire bpf_spin_lock that is already taken by bpf_timer_cancel_and_free,
so both cpus spin forever. The same problem existed in bpf_timer_cancel().
One bpf prog on one cpu might call bpf_timer_cancel and wait, while another cpu is in
the timer callback that tries to do bpf_timer_*() helper on the same timer.
The fix is to do drop_prog_refcnt() and unlock. And only then hrtimer_cancel.
Because of this had to add callback_fn != NULL check to bpf_timer_cb().
Also removed redundant bpf_prog_inc/put from bpf_timer_cb() and replaced
with rcu_dereference_check similar to recent rcu_read_lock-removal from drivers.
bpf_timer_cb is in softirq.
. Managed to hit refcnt==0 while doing bpf_prog_put from bpf_timer_cancel_and_free().
That exposed the issue that bpf_prog_put wasn't ready to be called from irq context.
Fixed similar to bpf_map_put which is irq ready.
- Refactored BPF_CALL_1(bpf_spin_lock) into __bpf_spin_lock_irqsave() to
make the main logic more clear, since Martin and Yonghong brought up this concern.
v3->v4:
1.
Split callback_fn from bpf_timer_start into bpf_timer_set_callback as
suggested by Martin. That makes bpf timer api match one to one to
kernel hrtimer api and provides greater flexibility.
2.
Martin also discovered the following issue with uref approach:
bpftool prog load xdp_timer.o /sys/fs/bpf/xdp_timer type xdp
bpftool net attach xdpgeneric pinned /sys/fs/bpf/xdp_timer dev lo
rm /sys/fs/bpf/xdp_timer
nc -6 ::1 8888
bpftool net detach xdpgeneric dev lo
The timer callback stays active in the kernel though the prog was detached
and map usercnt == 0.
It happened because 'bpftool prog load' pinned the prog only.
The map usercnt went to zero. Subsequent attach and runs didn't
affect map usercnt. The timer was able to start and bpf_prog_inc itself.
When the prog was detached the prog stayed active.
To address this issue added
if (!atomic64_read(&(t->map->usercnt))) return -EPERM;
to the first patch.
Which means that timers are allowed only in the maps that are held
by user space with open file descriptor or maps pinned in bpffs.
3.
Discovered that timers in inner maps were broken.
The inner map pointers are dynamic. Therefore changed bpf_timer_init()
to accept explicit map pointer supplied by the program instead
of hidden map pointer supplied by the verifier.
To make sure that pointer to a timer actually belongs to that map
added the verifier check in patch 3.
4.
Addressed Yonghong's feedback. Improved comments and added
dynamic in_nmi() check.
Added Acks.
v2->v3:
The v2 approach attempted to bump bpf_prog refcnt when bpf_timer_start is
called to make sure callback code doesn't disappear when timer is active and
drop refcnt when timer cb is done. That led to a ton of race conditions between
callback running and concurrent bpf_timer_init/start/cancel on another cpu,
and concurrent bpf_map_update/delete_elem, and map destroy.
Then v2.5 approach skipped prog refcnt altogether. Instead it remembered all
timers that bpf prog armed in a link list and canceled them when prog refcnt
went to zero. The race conditions disappeared, but timers in map-in-map could
not be supported cleanly, since timers in inner maps have inner map's life time
and don't match prog's life time.
This v3 approach makes timers to be owned by maps. It allows timers in inner
maps to be supported from the start. This apporach relies on "user refcnt"
scheme used in prog_array that stores bpf programs for bpf_tail_call. The
bpf_timer_start() increments prog refcnt, but unlike 1st approach the timer
callback does decrement the refcnt. The ops->map_release_uref is
responsible for cancelling the timers and dropping prog refcnt when user space
reference to a map is dropped. That addressed all the races and simplified
locking.
Andrii presented a use case where specifying callback_fn in bpf_timer_init()
is inconvenient vs specifying in bpf_timer_start(). The bpf_timer_init()
typically is called outside for timer callback, while bpf_timer_start() most
likely will be called from the callback.
timer_cb() { ... bpf_timer_start(timer_cb); ...} looks like recursion and as
infinite loop to the verifier. The verifier had to be made smarter to recognize
such async callbacks. Patches 7,8,9 addressed that.
Patch 1 and 2 refactoring.
Patch 3 implements bpf timer helpers and locking.
Patch 4 implements map side of bpf timer support.
Patch 5 prevent pointer mismatch in bpf_timer_init.
Patch 6 adds support for BTF in inner maps.
Patch 7 teaches check_cfg() pass to understand async callbacks.
Patch 8 teaches do_check() pass to understand async callbacks.
Patch 9 teaches check_max_stack_depth() pass to understand async callbacks.
Patches 10 and 11 are the tests.
v1->v2:
- Addressed great feedback from Andrii and Toke.
- Fixed race between parallel bpf_timer_*() ops.
- Fixed deadlock between timer callback and LRU eviction or bpf_map_delete/update.
- Disallowed mmap and global timers.
- Allow spin_lock and bpf_timer in an element.
- Fixed memory leaks due to map destruction and LRU eviction.
- A ton more tests.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
ASan reports several memory leaks running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
The fourth of these leaks is related to some strings never being freed
in trace__parse_events_option.
This patch adds the missing frees.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/34d08535b11124106b859790549991abff5a7de8.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reports several memory leaks running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
The third of these leaks is related to evsel->priv fields of sycalls
never being deallocated.
This patch adds the function evlist__free_syscall_tp_fields which
iterates over all evsels in evlist, matching syscalls, and calling the
missing frees.
This new function is called at the end of trace__run, right before
calling evlist__delete.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/46526611904ec5ff2768b59014e3afce8e0197d1.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reports several memory leaks running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
The second of these leaks is caused by the arg_fmt field of syscall not
being deallocated.
This patch adds a new function syscall__exit which is called on all
syscalls.table entries in trace__exit, which will free the arg_fmt
field.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/d68f25c043d30464ac9fa79c3399e18f429bca82.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reports several memory leaks running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
The first of these leaks is related to struct trace fields never being
deallocated.
This patch adds the function trace__exit, which is called at the end of
cmd_trace, replacing the existing deallocation, which is now moved
inside the new function.
This function deallocates:
- ev_qualifier
- ev_qualifier_ids.entries
- syscalls.table
- sctbl
- perfconfig_events
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/de5945ed5c0cb882cbfa3268567d0bff460ff016.1626343282.git.rickyman7@gmail.com
[ Removed needless initialization to zero, missing named initializers are zeroed by the compiler ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check that map-in-map supports bpf timers.
Check that indirect "recursion" of timer callbacks works:
timer_cb1() { bpf_timer_set_callback(timer_cb2); }
timer_cb2() { bpf_timer_set_callback(timer_cb1); }
Check that
bpf_map_release
htab_free_prealloced_timers
bpf_timer_cancel_and_free
hrtimer_cancel
works while timer cb is running.
"while true; do ./test_progs -t timer_mim; done"
is a great stress test. It caught missing timer cancel in htab->extra_elems.
timer_mim_reject.c is a negative test that checks
that timer<->map mismatch is prevented.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-12-alexei.starovoitov@gmail.com
Add bpf_timer test that creates timers in preallocated and
non-preallocated hash, in array and in lru maps.
Let array timer expire once and then re-arm it for 35 seconds.
Arm lru timer into the same callback.
Then arm and re-arm hash timers 10 times each.
At the last invocation of prealloc hash timer cancel the array timer.
Force timer free via LRU eviction and direct bpf_map_delete_elem.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-11-alexei.starovoitov@gmail.com
Teach max stack depth checking algorithm about async callbacks
that don't increase bpf program stack size.
Also add sanity check that bpf_tail_call didn't sneak into async cb.
It's impossible, since PTR_TO_CTX is not available in async cb,
hence the program cannot contain bpf_tail_call(ctx,...);
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-10-alexei.starovoitov@gmail.com
bpf_for_each_map_elem() and bpf_timer_set_callback() helpers are relying on
PTR_TO_FUNC infra in the verifier to validate addresses to subprograms
and pass them into the helpers as function callbacks.
In case of bpf_for_each_map_elem() the callback is invoked synchronously
and the verifier treats it as a normal subprogram call by adding another
bpf_func_state and new frame in __check_func_call().
bpf_timer_set_callback() doesn't invoke the callback directly.
The subprogram will be called asynchronously from bpf_timer_cb().
Teach the verifier to validate such async callbacks as special kind
of jump by pushing verifier state into stack and let pop_stack() process it.
Special care needs to be taken during state pruning.
The call insn doing bpf_timer_set_callback has to be a prune_point.
Otherwise short timer callbacks might not have prune points in front of
bpf_timer_set_callback() which means is_state_visited() will be called
after this call insn is processed in __check_func_call(). Which means that
another async_cb state will be pushed to be walked later and the verifier
will eventually hit BPF_COMPLEXITY_LIMIT_JMP_SEQ limit.
Since push_async_cb() looks like another push_stack() branch the
infinite loop detection will trigger false positive. To recognize
this case mark such states as in_async_callback_fn.
To distinguish infinite loop in async callback vs the same callback called
with different arguments for different map and timer add async_entry_cnt
to bpf_func_state.
Enforce return zero from async callbacks.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-9-alexei.starovoitov@gmail.com
In the following bpf subprogram:
static int timer_cb(void *map, void *key, void *value)
{
bpf_timer_set_callback(.., timer_cb);
}
the 'timer_cb' is a pointer to a function.
ld_imm64 insn is used to carry this pointer.
bpf_pseudo_func() returns true for such ld_imm64 insn.
Unlike bpf_for_each_map_elem() the bpf_timer_set_callback() is asynchronous.
Relax control flow check to allow such "recursion" that is seen as an infinite
loop by check_cfg(). The distinction between bpf_for_each_map_elem() the
bpf_timer_set_callback() is done in the follow up patch.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-8-alexei.starovoitov@gmail.com
BTF is required for 'struct bpf_timer' to be recognized inside map value.
The bpf timers are supported inside inner maps.
Remember 'struct btf *' in inner_map_meta to make it available
to the verifier in the sequence:
struct bpf_map *inner_map = bpf_map_lookup_elem(&outer_map, ...);
if (inner_map)
timer = bpf_map_lookup_elem(&inner_map, ...);
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-7-alexei.starovoitov@gmail.com
bpf_timer_init() arguments are:
1. pointer to a timer (which is embedded in map element).
2. pointer to a map.
Make sure that pointer to a timer actually belongs to that map.
Use map_uid (which is unique id of inner map) to reject:
inner_map1 = bpf_map_lookup_elem(outer_map, key1)
inner_map2 = bpf_map_lookup_elem(outer_map, key2)
if (inner_map1 && inner_map2) {
timer = bpf_map_lookup_elem(inner_map1);
if (timer)
// mismatch would have been allowed
bpf_timer_init(timer, inner_map2);
}
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-6-alexei.starovoitov@gmail.com
Restrict bpf timers to array, hash (both preallocated and kmalloced), and
lru map types. The per-cpu maps with timers don't make sense, since 'struct
bpf_timer' is a part of map value. bpf timers in per-cpu maps would mean that
the number of timers depends on number of possible cpus and timers would not be
accessible from all cpus. lpm map support can be added in the future.
The timers in inner maps are supported.
The bpf_map_update/delete_elem() helpers and sys_bpf commands cancel and free
bpf_timer in a given map element.
Similar to 'struct bpf_spin_lock' BTF is required and it is used to validate
that map element indeed contains 'struct bpf_timer'.
Make check_and_init_map_value() init both bpf_spin_lock and bpf_timer when
map element data is reused in preallocated htab and lru maps.
Teach copy_map_value() to support both bpf_spin_lock and bpf_timer in a single
map element. There could be one of each, but not more than one. Due to 'one
bpf_timer in one element' restriction do not support timers in global data,
since global data is a map of single element, but from bpf program side it's
seen as many global variables and restriction of single global timer would be
odd. The sys_bpf map_freeze and sys_mmap syscalls are not allowed on maps with
timers, since user space could have corrupted mmap element and crashed the
kernel. The maps with timers cannot be readonly. Due to these restrictions
search for bpf_timer in datasec BTF in case it was placed in the global data to
report clear error.
The previous patch allowed 'struct bpf_timer' as a first field in a map
element only. Relax this restriction.
Refactor lru map to s/bpf_lru_push_free/htab_lru_push_free/ to cancel and free
the timer when lru map deletes an element as a part of it eviction algorithm.
Make sure that bpf program cannot access 'struct bpf_timer' via direct load/store.
The timer operation are done through helpers only.
This is similar to 'struct bpf_spin_lock'.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-5-alexei.starovoitov@gmail.com
Introduce 'struct bpf_timer { __u64 :64; __u64 :64; };' that can be embedded
in hash/array/lru maps as a regular field and helpers to operate on it:
// Initialize the timer.
// First 4 bits of 'flags' specify clockid.
// Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed.
long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, int flags);
// Configure the timer to call 'callback_fn' static function.
long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn);
// Arm the timer to expire 'nsec' nanoseconds from the current time.
long bpf_timer_start(struct bpf_timer *timer, u64 nsec, u64 flags);
// Cancel the timer and wait for callback_fn to finish if it was running.
long bpf_timer_cancel(struct bpf_timer *timer);
Here is how BPF program might look like:
struct map_elem {
int counter;
struct bpf_timer timer;
};
struct {
__uint(type, BPF_MAP_TYPE_HASH);
__uint(max_entries, 1000);
__type(key, int);
__type(value, struct map_elem);
} hmap SEC(".maps");
static int timer_cb(void *map, int *key, struct map_elem *val);
/* val points to particular map element that contains bpf_timer. */
SEC("fentry/bpf_fentry_test1")
int BPF_PROG(test1, int a)
{
struct map_elem *val;
int key = 0;
val = bpf_map_lookup_elem(&hmap, &key);
if (val) {
bpf_timer_init(&val->timer, &hmap, CLOCK_REALTIME);
bpf_timer_set_callback(&val->timer, timer_cb);
bpf_timer_start(&val->timer, 1000 /* call timer_cb2 in 1 usec */, 0);
}
}
This patch adds helper implementations that rely on hrtimers
to call bpf functions as timers expire.
The following patches add necessary safety checks.
Only programs with CAP_BPF are allowed to use bpf_timer.
The amount of timers used by the program is constrained by
the memcg recorded at map creation time.
The bpf_timer_init() helper needs explicit 'map' argument because inner maps
are dynamic and not known at load time. While the bpf_timer_set_callback() is
receiving hidden 'aux->prog' argument supplied by the verifier.
The prog pointer is needed to do refcnting of bpf program to make sure that
program doesn't get freed while the timer is armed. This approach relies on
"user refcnt" scheme used in prog_array that stores bpf programs for
bpf_tail_call. The bpf_timer_set_callback() will increment the prog refcnt which is
paired with bpf_timer_cancel() that will drop the prog refcnt. The
ops->map_release_uref is responsible for cancelling the timers and dropping
prog refcnt when user space reference to a map reaches zero.
This uref approach is done to make sure that Ctrl-C of user space process will
not leave timers running forever unless the user space explicitly pinned a map
that contained timers in bpffs.
bpf_timer_init() and bpf_timer_set_callback() will return -EPERM if map doesn't
have user references (is not held by open file descriptor from user space and
not pinned in bpffs).
The bpf_map_delete_elem() and bpf_map_update_elem() operations cancel
and free the timer if given map element had it allocated.
"bpftool map update" command can be used to cancel timers.
The 'struct bpf_timer' is explicitly __attribute__((aligned(8))) because
'__u64 :64' has 1 byte alignment of 8 byte padding.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-4-alexei.starovoitov@gmail.com
Move ____bpf_spin_lock/unlock into helpers to make it more clear
that quadruple underscore bpf_spin_lock/unlock are irqsave/restore variants.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-3-alexei.starovoitov@gmail.com
Currently bpf_prog_put() is called from the task context only.
With addition of bpf timers the timer related helpers will start calling
bpf_prog_put() from irq-saved region and in rare cases might drop
the refcnt to zero.
To address this case, first, convert bpf_prog_free_id() to be irq-save
(this is similar to bpf_map_free_id), and, second, defer non irq
appropriate calls into work queue.
For example:
bpf_audit_prog() is calling kmalloc and wake_up_interruptible,
bpf_prog_kallsyms_del_all()->bpf_ksym_del()->spin_unlock_bh().
They are not safe with irqs disabled.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-2-alexei.starovoitov@gmail.com