Commit graph

1,058,063 commits

Author SHA1 Message Date
Thomas Zimmermann
311ac6f3e5 drm/omapdrm: Remove outdated comment
The comment refers to drm_irq_install() et al, which are not used by
omapdrm. The functions are part of the DRM IRQ midlayer and shouldn't
be used any longer. Remove the comment.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706073125.7689-1-tzimmermann@suse.de
2021-07-15 11:24:53 +02:00
Thomas Zimmermann
db20ea679d drm/vbox: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706075011.9009-1-tzimmermann@suse.de
2021-07-15 11:16:06 +02:00
Thomas Zimmermann
48bd858084 drm/qxl: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706074735.8849-1-tzimmermann@suse.de
2021-07-15 11:16:06 +02:00
Maxime Ripard
27da370e0f
drm/vc4: hdmi: Remove drm_encoder->crtc usage
The drm_encoder crtc pointer isn't really fit for an atomic driver,
let's rely on the connector state instead.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707141930.1811128-1-maxime@cerno.tech
2021-07-15 11:08:25 +02:00
Maxime Ripard
44fe9f90eb
drm/vc4: hdmi: Only call into DRM framework if registered
Our hotplug handler will currently call the drm_kms_helper_hotplug_event
every time a hotplug interrupt is called.

However, since the device is registered after all the drivers have
finished their bind callback, we have a window between when we install
our interrupt handler and when drm_dev_register() is eventually called
where our handler can run and call drm_kms_helper_hotplug_event but the
device hasn't been registered yet, causing a null pointer dereference.

Fix this by making sure we only call drm_kms_helper_hotplug_event if our
device has been properly registered.

Fixes: f4790083c7 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-4-maxime@cerno.tech
2021-07-15 10:50:09 +02:00
Maxime Ripard
776efe800f
drm/vc4: hdmi: Drop devm interrupt handler for hotplug interrupts
The hotplugs interrupt handlers are registered through the
devm_request_threaded_irq function. However, while free_irq is indeed
called properly when the device is unbound or bind fails, it's called
after unbind or bind is done.

In our particular case, it means that on failure it creates a window
where our interrupt handler can be called, but we're freeing every
resource (CEC adapter, DRM objects, etc.) it might need.

In order to address this, let's switch to the non-devm variant to
control better when the handler will be unregistered and allow us to
make it safe.

Fixes: f4790083c7 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-3-maxime@cerno.tech
2021-07-15 10:50:05 +02:00
Maxime Ripard
32a19de21a
drm/vc4: hdmi: Drop devm interrupt handler for CEC interrupts
The CEC interrupt handlers are registered through the
devm_request_threaded_irq function. However, while free_irq is indeed
called properly when the device is unbound or bind fails, it's called
after unbind or bind is done.

In our particular case, it means that on failure it creates a window
where our interrupt handler can be called, but we're freeing every
resource (CEC adapter, DRM objects, etc.) it might need.

In order to address this, let's switch to the non-devm variant to
control better when the handler will be unregistered and allow us to
make it safe.

Fixes: 15b4511a4a ("drm/vc4: add HDMI CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-2-maxime@cerno.tech
2021-07-15 10:43:20 +02:00
Yang Yingliang
95edbbf78c platform/x86: amd-pmc: Fix missing unlock on error in amd_pmc_send_cmd()
Add the missing unlock before return from function amd_pmc_send_cmd()
in the error handling case.

Fixes: 95e1b60f8d ("platform/x86: amd-pmc: Fix command completion code")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210715074327.1966083-1-yangyingliang@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-15 10:27:20 +02:00
Takashi Iwai
2c4e315457 ALSA: compress: Initialize mutex in snd_compress_new()
Currently the snd_compr.lock mutex isn't initialized in the API
functions although the lock is used many places in other code in
compress offload API.  It's because the object was expected to be
initialized via snd_compress_register(), but this was never used by
ASoC, which is the only user.  Instead, ASoC initializes the mutex by
itself, and this is error-prone.

This patch moves the mutex initialization into the more appropriate
place, snd_compress_new(), for avoiding the missing init.

Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210714162424.4412-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-15 10:22:38 +02:00
Takashi Iwai
fc93c96fe3 ALSA: compress: Drop unused functions
snd_compress_register() and snd_compress_deregister() API functions
have been never used by in-tree drivers.
Let's clean up the dead code.

Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210714162424.4412-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-15 10:22:30 +02:00
Suravee Suthikulpanit
4a5c155a5a MAINTAINERS: Add Suravee Suthikulpanit as Reviewer for AMD IOMMU (AMD-Vi)
To help review changes related to AMD IOMMU.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1626296542-30454-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-07-15 09:00:16 +02:00
Steve French
9946aa630a
Merge pull request #61 from namjaejeon/cifsd-for-next
ksmbd-fixes
2021-07-14 20:55:12 -05:00
He Fengqing
75f0fc7b48 bpf: Fix potential memleak and UAF in the verifier.
In bpf_patch_insn_data(), we first use the bpf_patch_insn_single() to
insert new instructions, then use adjust_insn_aux_data() to adjust
insn_aux_data. If the old env->prog have no enough room for new inserted
instructions, we use bpf_prog_realloc to construct new_prog and free the
old env->prog.

There have two errors here. First, if adjust_insn_aux_data() return
ENOMEM, we should free the new_prog. Second, if adjust_insn_aux_data()
return ENOMEM, bpf_patch_insn_data() will return NULL, and env->prog has
been freed in bpf_prog_realloc, but we will use it in bpf_check().

So in this patch, we make the adjust_insn_aux_data() never fails. In
bpf_patch_insn_data(), we first pre-malloc memory for the new
insn_aux_data, then call bpf_patch_insn_single() to insert new
instructions, at last call adjust_insn_aux_data() to adjust
insn_aux_data.

Fixes: 8041902dae ("bpf: adjust insn_aux_data when patching insns")
Signed-off-by: He Fengqing <hefengqing@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210714101815.164322-1-hefengqing@huawei.com
2021-07-14 18:31:24 -07:00
Namjae Jeon
a9c241d01d ksmbd: fix typo in comment
Fix typo "openning" -> "opening".

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-07-15 10:25:30 +09:00
Kuniyuki Iwashima
f170acda7f bpf: Fix a typo of reuseport map in bpf.h.
Fix s/BPF_MAP_TYPE_REUSEPORT_ARRAY/BPF_MAP_TYPE_REUSEPORT_SOCKARRAY/ typo
in bpf.h.

Fixes: 2dbb9b9e6d ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210714124317.67526-1-kuniyu@amazon.co.jp
2021-07-14 18:12:05 -07:00
Matt Roper
7ad2d09ccd Merge branch 'topic/revid_steppings' into drm-intel-next
The switch from old old IS_FOO_REVID() macros to the new table-based
IS_FOO_{GT,DISP}_STEP() macros is needed on both drm-intel-next (for
display-based DMC matching) and drm-intel-gt-next (for workaround
guards).  To avoid conflicts, we'll apply the patches to a topic branch
and merge it to both intel branches to ensure the transition to the
new macros is clean.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2021-07-14 17:57:51 -07:00
Matt Roper
d6e6ac294d Merge branch 'topic/revid_steppings' into drm-intel-gt-next
The switch from old old IS_FOO_REVID() macros to the new table-based
IS_FOO_{GT,DISP}_STEP() macros is needed on both drm-intel-next (for
display-based DMC matching) and drm-intel-gt-next (for workaround
guards).  To avoid conflicts, we'll apply the patches to a topic branch
and merge it to both intel branches to ensure the transition to the
new macros is clean.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2021-07-14 17:55:21 -07:00
Matt Roper
eee42141e4 drm/i915/icl: Drop workarounds that only apply to pre-production steppings
We're past the point at which we usually drop workarounds that were
never needed on production hardware.  The driver will already print an
error and apply taint if loaded on pre-production hardware.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-13-matthew.d.roper@intel.com
2021-07-14 17:49:02 -07:00
Matt Roper
41eb74d51d drm/i915/cnl: Drop all workarounds
All of the Cannon Lake hardware that came out had graphics fused off,
and our userspace drivers have already dropped their support for the
platform; CNL-specific code in i915 that isn't inherited by subsequent
platforms is effectively dead code.  Let's remove all of the
CNL-specific workarounds as a quick and easy first step.

References: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6899
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-12-matthew.d.roper@intel.com
2021-07-14 17:48:03 -07:00
Matt Roper
dae751f40c drm/i915/dg1: Use revid->stepping tables
Switch DG1 to use a revid->stepping table as we're trying to do on all
platforms going forward.

This removes the last use of IS_REVID() and REVID_FOREVER, so remove
those now-unused macros as well to prevent their accidental use on
future platforms.

v2:
 - Use COMMON_STEP() macro in table.  (Anusha)

Bspec: 44463
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com
2021-07-14 17:47:11 -07:00
Matt Roper
97cf9b5815 drm/i915/rkl: Use revid->stepping tables
Switch RKL to use a revid->stepping table as we're trying to do on all
platforms going forward.

Bspec: 44501
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-10-matthew.d.roper@intel.com
2021-07-14 17:47:11 -07:00
Matt Roper
61b2dc4b58 drm/i915/jsl_ehl: Use revid->stepping tables
Switch JSL/EHL to use a revid->stepping table as we're trying to do on
all platforms going forward.

v2:
 - Use COMMON_STEP().  (Anusha)

Bspec: 29153
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-9-matthew.d.roper@intel.com
2021-07-14 17:47:01 -07:00
Matt Roper
cc7a3393f2 drm/i915/icl: Use revid->stepping tables
Switch ICL to use a revid->stepping table as we're trying to do on all
platforms going forward.  While we're at it, let's include some
additional steppings that have popped up, even if we don't yet have any
workarounds tied to those steppings (we probably need to audit our
workaround list soon to see if any of the bounds have moved or if new
workarounds have appeared).

Note that the current bspec table is missing information about how to
map PCI revision ID to GT/display steppings; it only provides an SoC
stepping.  The mapping to GT/display steppings (which aren't always the
same as the SoC stepping) used to be in the bspec, but was apparently
dropped during an update in Nov 2019; I've made my changes here based on
an older bspec snapshot that still had the necessary information.  We've
requested that the missing information be restored.

I'm only including the production revids in the table here since we're
past the point at which we usually stop trying to support pre-production
hardware.  An appropriate check is added to
intel_detect_preproduction_hw() to print an error and taint the kernel
just in case someone still tries to load the driver on old
pre-production hardware.

v2:
 - Drop pre-production steppings and add error/taint at startup when
   loading on pre-production hardware.

Bspec: 21141  # pre-Nov 2019 snapshot
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-8-matthew.d.roper@intel.com
2021-07-14 17:36:22 -07:00
Matt Roper
3dd22d46c7 drm/i915/glk: Use revid->stepping tables
Switch GLK to use a revid->stepping table as we're trying to do on all
platforms going forward.  Pre-production and placeholder revisions are
omitted.

Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.

Bspec: 19131
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-7-matthew.d.roper@intel.com
2021-07-14 17:36:22 -07:00
Alexei Starovoitov
cf2c6f0863 bpf: Sync tools/include/uapi/linux/bpf.h
Commit 47316f4a30 missed updating tools/.../bpf.h.
Sync it.

Fixes: 47316f4a30 ("bpf: Support input xdp_md context in BPF_PROG_TEST_RUN")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-07-14 17:36:20 -07:00
Matt Roper
fd51fa8ac6 drm/i915/bxt: Use revid->stepping tables
Switch BXT to use a revid->stepping table as we're trying to do on all
platforms going forward.  Note that the REVID macros we had before
weren't being used anywhere in the code and weren't even correct; the
table values come from the bspec (and omits all the placeholder and
preproduction revisions).

Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.

Bspec: 13620
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-6-matthew.d.roper@intel.com
2021-07-14 17:36:13 -07:00
Matt Roper
6eea6f16e6 drm/i915/kbl: Drop pre-production revision from stepping table
We're long past the point where we need to care about pre-production
hardware, and we already warn the user and taint the kernel if we detect
the driver is being loaded on pre-production hardware.

Bspec: 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-5-matthew.d.roper@intel.com
2021-07-14 17:36:12 -07:00
Matt Roper
0f93f5da1c drm/i915/skl: Use revid->stepping tables
Switch SKL to use a revid->stepping table as we're trying to do on all
platforms going forward.  Also drop the preproduction revisions and add
the newer steppings we hadn't already handled.

Note that SKL has a case where a newer revision ID corresponds to an
older GT/disp stepping (0x9 -> STEP_J0, 0xA -> STEP_I1).  Also, the lack
of a revision ID 0x8 in the table is intentional and not an oversight.
We'll re-write the KBL-specific comment to make it clear that these kind
of quirks are expected.

v2:
 - Since GT and display steppings are always identical on SKL use a
   macro to set both values at once in a more readable manner.  (Anusha)
 - Drop preproduction steppings.

Bspec: 13626
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-4-matthew.d.roper@intel.com
2021-07-14 17:35:59 -07:00
Matt Roper
c314b69395 drm/i915: Make pre-production detection use direct revid comparison
Although we're converting our workarounds to use a revid->stepping
lookup table, the function that detects pre-production hardware should
continue to compare against PCI revision ID values directly.  These are
listed in the bspec as integers, so it's easier to confirm their
correctness if we just use an integer literal rather than a symbolic
name anyway.

Bspec: 13620, 19131, 13626, 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-3-matthew.d.roper@intel.com
2021-07-14 17:35:59 -07:00
Anusha Srivatsa
db47fe727e drm/i915/step: s/<platform>_revid_tbl/<platform>_revids
Simplify the stepping info array name.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-2-matthew.d.roper@intel.com
2021-07-14 17:35:43 -07:00
Nicolas Saenz Julienne
aebacb7f6c timers: Fix get_next_timer_interrupt() with no timers pending
31cd0e119d ("timers: Recalculate next timer interrupt only when
necessary") subtly altered get_next_timer_interrupt()'s behaviour. The
function no longer consistently returns KTIME_MAX with no timers
pending.

In order to decide if there are any timers pending we check whether the
next expiry will happen NEXT_TIMER_MAX_DELTA jiffies from now.
Unfortunately, the next expiry time and the timer base clock are no
longer updated in unison. The former changes upon certain timer
operations (enqueue, expire, detach), whereas the latter keeps track of
jiffies as they move forward. Ultimately breaking the logic above.

A simplified example:

- Upon entering get_next_timer_interrupt() with:

	jiffies = 1
	base->clk = 0;
	base->next_expiry = NEXT_TIMER_MAX_DELTA;

  'base->next_expiry == base->clk + NEXT_TIMER_MAX_DELTA', the function
  returns KTIME_MAX.

- 'base->clk' is updated to the jiffies value.

- The next time we enter get_next_timer_interrupt(), taking into account
  no timer operations happened:

	base->clk = 1;
	base->next_expiry = NEXT_TIMER_MAX_DELTA;

  'base->next_expiry != base->clk + NEXT_TIMER_MAX_DELTA', the function
  returns a valid expire time, which is incorrect.

This ultimately might unnecessarily rearm sched's timer on nohz_full
setups, and add latency to the system[1].

So, introduce 'base->timers_pending'[2], update it every time
'base->next_expiry' changes, and use it in get_next_timer_interrupt().

[1] See tick_nohz_stop_tick().
[2] A quick pahole check on x86_64 and arm64 shows it doesn't make
    'struct timer_base' any bigger.

Fixes: 31cd0e119d ("timers: Recalculate next timer interrupt only when necessary")
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2021-07-15 01:23:54 +02:00
Frederic Weisbecker
1a3402d93c posix-cpu-timers: Fix rearm racing against process tick
Since the process wide cputime counter is started locklessly from
posix_cpu_timer_rearm(), it can be concurrently stopped by operations
on other timers from the same thread group, such as in the following
unlucky scenario:

         CPU 0                                CPU 1
         -----                                -----
                                           timer_settime(TIMER B)
   posix_cpu_timer_rearm(TIMER A)
       cpu_clock_sample_group()
           (pct->timers_active already true)

                                           handle_posix_cpu_timers()
                                               check_process_timers()
                                                   stop_process_timers()
                                                       pct->timers_active = false
       arm_timer(TIMER A)

   tick -> run_posix_cpu_timers()
       // sees !pct->timers_active, ignore
       // our TIMER A

Fix this with simply locking process wide cputime counting start and
timer arm in the same block.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Fixes: 60f2ceaa81 ("posix-cpu-timers: Remove unnecessary locking around cpu_clock_sample_group")
Cc: stable@vger.kernel.org
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
2021-07-15 01:20:10 +02:00
David S. Miller
3ffd3dad4b Merge branch 'r8152-pm-fixxes'
Takashi Iwai says:

====================
r8152: Fix a couple of PM problems

it seems that r8152 driver suffers from the deadlock at both runtime
and system PM.  Formerly, it was seen more often at hibernation
resume, but now it's triggered more frequently, as reported in SUSE
Bugzilla:
  https://bugzilla.suse.com/show_bug.cgi?id=1186194

While debugging the problem, I stumbled on a few obvious bugs and here
is the results with two patches for addressing the resume problem.

***

However, the story doesn't end here, unfortunately, and those patches
don't seem sufficing.  The rest major problem is that the driver calls
napi_disable() and napi_enable() in the PM suspend callbacks.  This
makes the system stalling at (runtime-)suspend.  If we drop
napi_disable() and napi_enable() calls in the PM suspend callbacks, it
starts working (that was the result in Bugzilla comment 13):
  https://bugzilla.suse.com/show_bug.cgi?id=1186194#c13

So, my patches aren't enough and we still need to investigate
further.  It'd be appreciated if anyone can give a fix or a hint for
more debugging.  The usage of napi_disable() at PM callbacks is unique
in this driver and looks rather suspicious to me; but I'm no expert in
this area so I might be wrong...
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-14 14:57:55 -07:00
Takashi Iwai
776ac63a98 r8152: Fix a deadlock by doubly PM resume
r8152 driver sets up the MAC address at reset-resume, while
rtl8152_set_mac_address() has the temporary autopm get/put.  This may
lead to a deadlock as the PM lock has been already taken for the
execution of the runtime PM callback.

This patch adds the workaround to avoid the superfluous autpm when
called from rtl8152_reset_resume().

Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-14 14:57:55 -07:00
Takashi Iwai
9c23aa5147 r8152: Fix potential PM refcount imbalance
rtl8152_close() takes the refcount via usb_autopm_get_interface() but
it doesn't release when RTL8152_UNPLUG test hits.  This may lead to
the imbalance of PM refcount.  This patch addresses it.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-14 14:57:55 -07:00
Christophe Branchereau
868d043f05
drm/panel: Add Innolux EJ030NA 3.0" 320x480 panel
Add support for the Innolux/Chimei EJ030NA 3.0"
320x480 TFT panel.

This panel can be found in the LDKs, RS97 V2.1 and RG300 (non IPS)
handheld gaming consoles.

While being 320x480, it is actually a horizontal 4:3
panel with non-square pixels in delta arrangement.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625121045.81711-2-paul@crapouillou.net
2021-07-14 21:49:07 +01:00
Paul Cercueil
1333adfcc3
dt-bindings: display/panel: Add Innolux EJ030NA
Add binding for the Innolux EJ030NA panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625121045.81711-1-paul@crapouillou.net
2021-07-14 21:43:48 +01:00
Alex Hung
23e9592b06 platform/x86: wireless-hotkey: remove hardcoded "hp" from the error message
This driver is no longer specific to HP laptops so "hp" in the error
message is no longer applicable.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Link: https://lore.kernel.org/r/20210710190810.313104-1-alex.hung@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-14 22:32:26 +02:00
Austin Kim
893c47d196 selinux: return early for possible NULL audit buffers
audit_log_start() may return NULL in below cases:

  - when audit is not initialized.
  - when audit backlog limit exceeds.

After the call to audit_log_start() is made and then possible NULL audit
buffer argument is passed to audit_log_*() functions,
audit_log_*() functions return immediately in case of a NULL audit buffer
argument.

But it is optimal to return early when audit_log_start() returns NULL,
because it is not necessary for audit_log_*() functions to be called with
NULL audit buffer argument.

So add exception handling for possible NULL audit buffers where
return value can be handled from callers.

Signed-off-by: Austin Kim <austin.kim@lge.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-07-14 15:25:27 -04:00
Jinzhou Su
775da83005 drm/amdgpu: add another Renoir DID
Add new PCI device id.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.11.x
2021-07-14 15:08:55 -04:00
Jinzhou Su
0c492e22ba drm/amdgpu: add another Renoir DID
Add new PCI device id.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-14 14:55:36 -04:00
James Clark
83d1fc92d4 perf cs-etm: Split Coresight decode by aux records
Populate the auxtrace queues using AUX records rather than whole
auxtrace buffers so that the decoder is reset between each aux record.

This is similar to the auxtrace_queues__process_index() ->
auxtrace_queues__add_indexed_event() flow where
perf_session__peek_event() is used to read AUXTRACE events out of random
positions in the file based on the auxtrace index.

But now we loop over all PERF_RECORD_AUX events instead of AUXTRACE
buffers. For each PERF_RECORD_AUX event, we find the corresponding
AUXTRACE buffer using the index, and add a fragment of that buffer to
the auxtrace queues.

No other changes to decoding were made, apart from populating the
auxtrace queues. The result of decoding is identical to before, except
in cases where decoding failed completely, due to not resetting the
decoder.

The reason for this change is because AUX records are emitted any time
tracing is disabled, for example when the process is scheduled out.
Because ETM was disabled and enabled again, the decoder also needs to be
reset to force the search for a sync packet. Otherwise there would be
fatal decoding errors.

Testing
=======

Testing was done with the following script, to diff the decoding results
between the patched and un-patched versions of perf:

	#!/bin/bash
	set -ex

	$1 script -i $3 $4 > split.script
	$2 script -i $3 $4 > default.script

	diff split.script default.script | head -n 20

And it was run like this, with various itrace options depending on the
quantity of synthesised events:

	compare.sh ./perf-patched ./perf-default perf-per-cpu-2-threads.data --itrace=i100000ns

No changes in output were observed in the following scenarios:

* Simple per-cpu
	perf record -e cs_etm/@tmc_etr0/u top

* Per-thread, single thread
	perf record -e cs_etm/@tmc_etr0/u --per-thread ./threads_C

* Per-thread multiple threads (but only one thread collected data):
	perf record -e cs_etm/@tmc_etr0/u --per-thread --pid 4596,4597

* Per-thread multiple threads (both threads collected data):
	perf record -e cs_etm/@tmc_etr0/u --per-thread --pid 4596,4597

* Per-cpu explicit threads:
	perf record -e cs_etm/@tmc_etr0/u --pid 853,854

* System-wide (per-cpu):
    perf record -e cs_etm/@tmc_etr0/u -a

* No data collected (no aux buffers)
	Can happen with any command when run for a short period

* Containing truncated records
	Can happen with any command

* Containing aux records with 0 size
	Can happen with any command

* Snapshot mode (various files with and without buffer wrap)
	perf record -e cs_etm/@tmc_etr0/u -a --snapshot

Some differences were observed in the following scenario:

* Snapshot mode (with duplicate buffers)
	perf record -e cs_etm/@tmc_etr0/u -a --snapshot

Fewer samples are generated in snapshot mode if duplicate buffers
were gathered because buffers with the same offset are now only added
once. This gives different, but more correct results and no duplicate
data is decoded any more.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Branislav Rankov <branislav.rankov@arm.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210624164303.28632-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14 14:42:36 -03:00
Arnaldo Carvalho de Melo
fa2c02e579 tools headers: Remove broken definition of __LITTLE_ENDIAN
The linux/kconfig.h file was copied from the kernel but the line where
with the generated/autoconf.h include from where the CONFIG_ entries
would come from was deleted, as tools/ build system don't create that
file, so we ended up always defining just __LITTLE_ENDIAN as
CONFIG_CPU_BIG_ENDIAN was nowhere to be found.

This in turn ended up breaking the build in some systems where
__LITTLE_ENDIAN was already defined, such as the androind NDK.

So just ditch that block that depends on the CONFIG_CPU_BIG_ENDIAN
define.

The kconfig.h file was copied just to get IS_ENABLED() and a
'make -C tools/all' doesn't breaks with this removal.

Fixes: 93281c4a96 ("x86/insn: Add an insn_decode() API")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YO8hK7lqJcIWuBzx@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14 14:39:36 -03:00
Mark Brown
eb14ecca76
Merge series "soundwire/ASoC: add mockup codec support" from Bard Liao <yung-chuan.liao@linux.intel.com>:
Adding mockup SoundWire codec is useful to debug driver/topology changes
without having any actual device connected.

Bard Liao (2):
  soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA
  soundwire: stream: don't program mockup device ports

Pierre-Louis Bossart (8):
  ASoC: codecs: add SoundWire mockup device support
  ASoC: soc-acpi: cnl: add table for SoundWire mockup devices
  ASoC: soc-acpi: tgl: add table for SoundWire mockup devices
  ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests
  soundwire: add flag to ignore all command/control for mockup devices
  soundwire: bus: squelch error returned by mockup devices
  soundwire: cadence: add debugfs interface for PDI loopbacks
  soundwire: cadence: override PDI configurations to create loopback

 drivers/soundwire/bus.c                       |  10 +-
 drivers/soundwire/cadence_master.c            | 174 ++++++++--
 drivers/soundwire/cadence_master.h            |   3 +
 drivers/soundwire/stream.c                    |   5 +-
 include/linux/soundwire/sdw.h                 |   3 +
 sound/soc/codecs/Kconfig                      |  18 +
 sound/soc/codecs/Makefile                     |   2 +
 sound/soc/codecs/sdw-mockup.c                 | 312 ++++++++++++++++++
 sound/soc/intel/boards/Kconfig                |   1 +
 sound/soc/intel/boards/sof_sdw.c              |  41 +++
 sound/soc/intel/common/Makefile               |   3 +-
 .../intel/common/soc-acpi-intel-cnl-match.c   |  15 +
 .../common/soc-acpi-intel-sdw-mockup-match.c  | 166 ++++++++++
 .../common/soc-acpi-intel-sdw-mockup-match.h  |  17 +
 .../intel/common/soc-acpi-intel-tgl-match.c   |  23 ++
 15 files changed, 754 insertions(+), 39 deletions(-)
 create mode 100644 sound/soc/codecs/sdw-mockup.c
 create mode 100644 sound/soc/intel/common/soc-acpi-intel-sdw-mockup-match.c
 create mode 100644 sound/soc/intel/common/soc-acpi-intel-sdw-mockup-match.h

base-commit: e73f0f0ee7

--
2.17.1
2021-07-14 18:29:58 +01:00
Pierre-Louis Bossart
0ccac3bcf3
ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests
Add support for SoundWire mockup devices. The configurations assume the
same topology as the CML SoundWire devices and can be used to test the
SOF firmware on a development board (RVP, UpExtreme) without any
hardware connected.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-14 18:02:07 +01:00
Pierre-Louis Bossart
3025d398c4
ASoC: soc-acpi: tgl: add table for SoundWire mockup devices
Follow the same idea as for CNL/UpExtreme and add mockup test
first. They will only be selected if the SSDT is modified to add such
mockup devices.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-14 18:02:07 +01:00
Pierre-Louis Bossart
2694cda7a4
ASoC: soc-acpi: cnl: add table for SoundWire mockup devices
Add support for two configurations with SoundWire mockup devices that
emulate the two CometLake configurations with one and two amps. This
patch helps test the SOF firmware on an UpExtreme board without any
hardware connected, e.g. by doing a loopback of the playback stream on
capture streams.

The mapping of the partIDs is as follows:

0xAAAA: generic full-duplex codec (not currently used)
0xAA55: headset codec (mock-up of RT711/RT5682) - full-duplex
0x55AA: amplifier (mock-up of RT1308/RT1316/Maxim 98373) - playback
with IV sense feedback
0x5555: mic codec (mock-up of RT715) - capture-only

The tables are added in a separate file to allow for mockup codecs to be
added on other platforms, but the mapping to specific topologies
remains platform-specific.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-14 18:02:06 +01:00
Pierre-Louis Bossart
81d3d3d0bf
ASoC: codecs: add SoundWire mockup device support
To test the host controller and bus management code, it is currently
required to have a physical SoundWire peripheral attached to the
bus. To help with pre-silicon or early hardware enablement, it would
be very useful to have a SoundWire 'mockup' device that is exposed in
platform firmware but does not drive any signal on the bus.

This is different to the existing ASoC 'dummy' codec uses for I2S/TDM,
the SoundWire spec makes it clear that a device that is not attached
to the bus is not permitted to interact with the bus, be it for
command/control or data.

This patch exposes a 'mockup' device, with a minimalist driver, with 4
partID values reserved by Intel for such test configurations. The
mockup device exposes one full-duplex DAI based on 2 ports (DP1 for
playback and DP8 for capture). The capture data port is just virtual,
such a mockup device is prevented by the SoundWire specification from
presenting any data generated by a Source port without being Attached.

All the callbacks exposed by the SoundWire Slave interface are
populated, even if they just return immediately. This is intentional
to describe what a minimal codec driver should do and implement and
help new codec vendors provide support for their devices.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-14 18:02:05 +01:00
Stephen Boyd
10252bae86 mmc: core: Don't allocate IDA for OF aliases
There's a chance that the IDA allocated in mmc_alloc_host() is not freed
for some time because it's freed as part of a class' release function
(see mmc_host_classdev_release() where the IDA is freed). If another
thread is holding a reference to the class, then only once all balancing
device_put() calls (in turn calling kobject_put()) have been made will
the IDA be released and usable again.

Normally this isn't a problem because the kobject is released before
anything else that may want to use the same number tries to again, but
with CONFIG_DEBUG_KOBJECT_RELEASE=y and OF aliases it becomes pretty
easy to try to allocate an alias from the IDA twice while the first time
it was allocated is still pending a call to ida_simple_remove(). It's
also possible to trigger it by using CONFIG_DEBUG_KOBJECT_RELEASE and
probe defering a driver at boot that calls mmc_alloc_host() before
trying to get resources that may defer likes clks or regulators.

Instead of allocating from the IDA in this scenario, let's just skip it
if we know this is an OF alias. The number is already "claimed" and
devices that aren't using OF aliases won't try to use the claimed
numbers anyway (see mmc_first_nonreserved_index()). This should avoid
any issues with mmc_alloc_host() returning failures from the
ida_simple_get() in the case that we're using an OF alias.

Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Cc: Sujit Kautkar <sujitka@chromium.org>
Reported-by: Zubin Mithra <zsm@chromium.org>
Fixes: fa2d0aa969 ("mmc: core: Allow setting slot index via device tree alias")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210623075002.1746924-3-swboyd@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-07-14 18:55:28 +02:00
Stephen Boyd
edb25572fc mmc: core: Use kref in place of struct mmc_blk_data::usage
Ulf reported the following KASAN splat after adding some manual hacks
into mmc-utils[1].

 DEBUG: mmc_blk_open: Let's sleep for 10s..
 mmc1: card 0007 removed
 BUG: KASAN: use-after-free in mmc_blk_get+0x58/0xb8
 Read of size 4 at addr ffff00000a394a28 by task mmc/180

 CPU: 2 PID: 180 Comm: mmc Not tainted 5.10.0-rc4-00069-gcc758c8c7127-dirty #5
 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
 Call trace:
  dump_backtrace+0x0/0x2b4
  show_stack+0x18/0x6c
  dump_stack+0xfc/0x168
  print_address_description.constprop.0+0x6c/0x488
  kasan_report+0x118/0x210
  __asan_load4+0x94/0xd0
  mmc_blk_get+0x58/0xb8
  mmc_blk_open+0x7c/0xdc
  __blkdev_get+0x3b4/0x964
  blkdev_get+0x64/0x100
  blkdev_open+0xe8/0x104
  do_dentry_open+0x234/0x61c
  vfs_open+0x54/0x64
  path_openat+0xe04/0x1584
  do_filp_open+0xe8/0x1e4
  do_sys_openat2+0x120/0x230
  __arm64_sys_openat+0xf0/0x15c
  el0_svc_common.constprop.0+0xac/0x234
  do_el0_svc+0x84/0xa0
  el0_sync_handler+0x264/0x270
  el0_sync+0x174/0x180

 Allocated by task 33:
  stack_trace_save+0x9c/0xdc
  kasan_save_stack+0x28/0x60
  __kasan_kmalloc.constprop.0+0xc8/0xf0
  kasan_kmalloc+0x10/0x20
  mmc_blk_alloc_req+0x94/0x4b0
  mmc_blk_probe+0x2d4/0xaa4
  mmc_bus_probe+0x34/0x4c
  really_probe+0x148/0x6e0
  driver_probe_device+0x78/0xec
  __device_attach_driver+0x108/0x16c
  bus_for_each_drv+0xf4/0x15c
  __device_attach+0x168/0x240
  device_initial_probe+0x14/0x20
  bus_probe_device+0xec/0x100
  device_add+0x55c/0xaf0
  mmc_add_card+0x288/0x380
  mmc_attach_sd+0x18c/0x22c
  mmc_rescan+0x444/0x4f0
  process_one_work+0x3b8/0x650
  worker_thread+0xa0/0x724
  kthread+0x218/0x220
  ret_from_fork+0x10/0x38

 Freed by task 33:
  stack_trace_save+0x9c/0xdc
  kasan_save_stack+0x28/0x60
  kasan_set_track+0x28/0x40
  kasan_set_free_info+0x24/0x4c
  __kasan_slab_free+0x100/0x180
  kasan_slab_free+0x14/0x20
  kfree+0xb8/0x46c
  mmc_blk_put+0xe4/0x11c
  mmc_blk_remove_req.part.0+0x6c/0xe4
  mmc_blk_remove+0x368/0x370
  mmc_bus_remove+0x34/0x50
  __device_release_driver+0x228/0x31c
  device_release_driver+0x2c/0x44
  bus_remove_device+0x1e4/0x200
  device_del+0x2b0/0x770
  mmc_remove_card+0xf0/0x150
  mmc_sd_detect+0x9c/0x150
  mmc_rescan+0x110/0x4f0
  process_one_work+0x3b8/0x650
  worker_thread+0xa0/0x724
  kthread+0x218/0x220
  ret_from_fork+0x10/0x38

 The buggy address belongs to the object at ffff00000a394800
  which belongs to the cache kmalloc-1k of size 1024
 The buggy address is located 552 bytes inside of
  1024-byte region [ffff00000a394800, ffff00000a394c00)
 The buggy address belongs to the page:
 page:00000000ff84ed53 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8a390
 head:00000000ff84ed53 order:3 compound_mapcount:0 compound_pincount:0
 flags: 0x3fffc0000010200(slab|head)
 raw: 03fffc0000010200 dead000000000100 dead000000000122 ffff000009f03800
 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff00000a394900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff00000a394980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 >ffff00000a394a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                   ^
  ffff00000a394a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff00000a394b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Looking closer at the problem, it looks like a classic dangling pointer
bug. The 'struct mmc_blk_data' that is used after being freed in
mmc_blk_put() is stashed away in 'md->disk->private_data' via
mmc_blk_alloc_req() but used in mmc_blk_get() because the 'usage' count
isn't properly aligned with the lifetime of the pointer. You'd expect
the 'usage' member to be in sync with the kfree(), and it mostly is,
except that mmc_blk_get() needs to dereference the potentially freed
memory storage for the 'struct mmc_blk_data' stashed away in the
private_data member to look at 'usage' before it actually figures out if
it wants to consider it a valid pointer or not. That's not going to work
if the freed memory has been overwritten by something else after the
free, and KASAN rightly complains here.

To fix the immediate problem, let's set the private_data member to NULL
in mmc_blk_put() so that mmc_blk_get() can consider the object "on the
way out" if the pointer is NULL and not even try to look at 'usage' if
the object isn't going to be around much longer. With that set to NULL
on the last mmc_blk_put(), optimize the get path further and use a kref
underneath the 'open_lock' mutex to only up the reference count if it's
non-zero, i.e.  alive, and otherwise make mmc_blk_get() return NULL,
without actually testing the reference count if we're in the process of
removing the object from the system.

Finally, tighten the locking region on the put side to only be around
the parts that are removing the 'mmc_blk_data' from the system and
publishing that fact to the gendisk and then drop the lock as soon as we
can to avoid holding the lock around code that doesn't need it. This
fixes the KASAN issue.

Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Cc: Sujit Kautkar <sujitka@chromium.org>
Cc: Zubin Mithra <zsm@chromium.org>
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/linux-mmc/CAPDyKFryT63Jc7+DXWSpAC19qpZRqFr1orxwYGMuSqx247O8cQ@mail.gmail.com/ [1]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210623075002.1746924-2-swboyd@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-07-14 18:55:24 +02:00