When the user submits a control URB via usbfs, the user supplies the
bRequestType value and the kernel uses it to compute the pipe value.
However, do_proc_control() performs this computation incorrectly in
the case where the bRequestType direction bit is set to USB_DIR_IN and
the URB's transfer length is 0: The pipe's direction is also set to IN
but it should be OUT, which is the direction the actual transfer will
use regardless of bRequestType.
Commit 5cc59c418f ("USB: core: WARN if pipe direction != setup
packet direction") added a check to compare the direction bit in the
pipe value to a control URB's actual direction and to WARN if they are
different. This can be triggered by the incorrect computation
mentioned above, as found by syzbot.
This patch fixes the computation, thus avoiding the WARNing.
Reported-and-tested-by: syzbot+72af3105289dcb4c055b@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210712185436.GB326369@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rewrite copy_huge_page() and move it into mm/util.c so it's always
available. Fixes an exposure of uninitialised memory on configurations
with HUGETLB and UFFD enabled and MIGRATION disabled.
Fixes: 8cc5fcbb5b ("mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many thanks to Kirill for reminding that PageDoubleMap cannot be relied on
to warn of pte mappings in the Anon THP case; and a scan of subpages does
not seem appropriate here. Note how follow_trans_huge_pmd() does not even
mark an Anon THP as mlocked when compound_mapcount != 1: multiple mlocking
of Anon THP is avoided, so simply return from page_mlock() in this case.
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Fixes: d9770fcc1c ("mm/rmap: fix old bug: munlocking THP missed other mlocks")
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the case where act->id is FLOW_ACTION_POLICE and also
act->police.rate_bytes_ps > 0 or act->police.rate_pkt_ps is not > 0
the boolean variable pps contains an uninitialized value when
function otx2_tc_act_set_police is called. Fix this by initializing
pps to false.
Addresses-Coverity: ("Uninitialized scalar variable)"
Fixes: 68fbff68db ("octeontx2-pf: Add police action for TC flower")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When TEE target mirrors traffic to another interface, sk_buff may
not have enough headroom to be processed correctly.
ip_finish_output2() detect this situation for ipv4 and allocates
new skb with enogh headroom. However ipv6 lacks this logic in
ip_finish_output2 and it leads to skb_under_panic:
skbuff: skb_under_panic: text:ffffffffc0866ad4 len:96 put:24
head:ffff97be85e31800 data:ffff97be85e317f8 tail:0x58 end:0xc0 dev:gre0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:110!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 393 Comm: kworker/2:2 Tainted: G OE 5.13.0 #13
Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.4 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x48/0x4a
Call Trace:
skb_push.cold.111+0x10/0x10
ipgre_header+0x24/0xf0 [ip_gre]
neigh_connected_output+0xae/0xf0
ip6_finish_output2+0x1a8/0x5a0
ip6_output+0x5c/0x110
nf_dup_ipv6+0x158/0x1000 [nf_dup_ipv6]
tee_tg6+0x2e/0x40 [xt_TEE]
ip6t_do_table+0x294/0x470 [ip6_tables]
nf_hook_slow+0x44/0xc0
nf_hook.constprop.34+0x72/0xe0
ndisc_send_skb+0x20d/0x2e0
ndisc_send_ns+0xd1/0x210
addrconf_dad_work+0x3c8/0x540
process_one_work+0x1d1/0x370
worker_thread+0x30/0x390
kthread+0x116/0x130
ret_from_fork+0x22/0x30
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename module_init & module_exit functions that are named
"mod_init" and "mod_exit" so that they are unique in both the
System.map file and in initcall_debug output instead of showing
up as almost anonymous "mod_init".
This is helpful for debugging and in determining how long certain
module_init calls take to execute.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: linux-x25@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the function irdma_sc_parse_fpm_commit_buf always returns 0, remove
the returned value check and change the returned type to void.
Fixes: 3f49d68425 ("RDMA/irdma: Implement HW Admin Queue OPs")
Link: https://lore.kernel.org/r/20210708064752.797520-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Majd Dibbiny <majd@nvidia.com>
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit 48d6b3336a ("RDMA/irdma: Add ABI definitions") adds
./include/uapi/rdma/irdma-abi.h with an additional unneeded closing
bracket at the end of the SPDX-License-Identifier line.
Hence, ./scripts/spdxcheck.py complains:
include/uapi/rdma/irdma-abi.h: 1:77 Syntax error: )
Remove that closing bracket to make spdxcheck.py happy.
Fixes: 48d6b3336a ("RDMA/irdma: Add ABI definitions")
Link: https://lore.kernel.org/r/20210701104127.1877-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following unused variable warning:
drivers/infiniband/hw/irdma/uk.c:934:6: warning: variable 'total_size' set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20210707211455.2076-1-tatyana.e.nikolova@intel.com
Link: https://lkml.org/lkml/2021/7/1/726
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 551c46edc7 ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Statistical counters are not incrementing in some adapter versions with
newer FW. This is due to the stats context length mismatch between FW and
driver. Since the L2 driver updates the length correctly, use the stats
length from L2 driver while allocating the DMA'able memory and creating
the stats context.
Fixes: 9d6b648c31 ("bnxt_en: Update firmware interface spec to 1.10.1.65.")
Link: https://lore.kernel.org/r/1626010296-6076-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The recent move of hv_do_rep_hypercall() to this file adds
a reference to touch_nmi_watchdog(). Its function definition
is included indirectly when compiled on x86, but not when
compiled on ARM64. So add the explicit #include.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626058204-2106-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
inode->i_mutex has been replaced with inode->i_rwsem long ago. Fix
comments still mentioning i_mutex.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Fix the following warning:
fs/fcntl.c:373:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough]
fallthrough;
^
include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough'
# define fallthrough __attribute__((__fallthrough__))
by placing the fallthrough; statement inside ifdeffery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Fix the following warning:
kernel/debug/gdbstub.c:1049:4: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough]
fallthrough;
^
include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough'
# define fallthrough __attribute__((__fallthrough__)
by placing the fallthrough; statement inside ifdeffery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Commit bc41a7f364 ("LICENSES: Add the CC-BY-4.0 license")
unfortunately introduced LICENSES/dual/CC-BY-4.0 in UTF-8 Unicode text
While python will barf at it with:
FAIL: 'ascii' codec can't decode byte 0xe2 in position 2109: ordinal not in range(128)
Traceback (most recent call last):
File "scripts/spdxcheck.py", line 244, in <module>
spdx = read_spdxdata(repo)
File "scripts/spdxcheck.py", line 47, in read_spdxdata
for l in open(el.path).readlines():
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 2109: ordinal not in range(128)
While it is indeed debatable if 'Licensor.' used in the license file
needs unicode quotes, instead, force spdxcheck to read utf-8.
Reported-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210707204840.30891-1-nm@ti.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The orginal formula will caused rdma fifo threshold config overflow
and no one could come out a solution for all SoC,
set threshold to 70% of max fifo size to make sure it will
not overflow, and 70% is a empirical vlaue.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
There is no need to free a NULL value. Instead, free the object
that is leaking due to the iterator.
The semantic patch that finds this problem is as follows:
// <smpl>
@@
expression x,e;
identifier f;
@@
x = f(...);
if (x == NULL) {
... when any
when != x = e
* of_node_put(x);
...
}
// </smpl>
Fixes: 6529007522 ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709200717.3676376-1-Julia.Lawall@inria.fr
The ffa_linux_errmap buffer access index is supposed to range from 0-8
but it ranges from 1-9 instead. It reads one element out of bounds. It
also changes the success into -EINVAL though ffa_to_linux_errno is never
used in case of success, it is expected to work for success case too.
It is slightly confusing code as the negative of the error code
is used as index to the buffer. Fix it by negating it at the start and
make it more readable.
Link: https://lore.kernel.org/r/20210707134739.1869481-1-sudeep.holla@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
clang produces the following warning:
drivers/firmware/arm_ffa/driver.c:123: warning: expecting
prototype for FF(). Prototype was for FFA_PAGE_SIZE() instead
This comment starts with '/**', but isn't a kernel-doc comment.
Refer Documentation/doc-guide/kernel-doc.rst
Fix the same by removing the kernel-doc style comment here.
Link: https://lore.kernel.org/r/20210622162202.3485866-1-sudeep.holla@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the driver core calls the probe callback it already checked that
the devices match, so there is no need to call the match callback again.
Link: https://lore.kernel.org/r/20210621201652.127611-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The bus probe callback calls the driver callback without further
checking. Better be safe than sorry and refuse registration of a driver
without a probe function to prevent a NULL pointer exception.
Link: https://lore.kernel.org/r/20210621201652.127611-1-u.kleine-koenig@pengutronix.de
Fixes: e781858488 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The scmi_linux_errmap buffer access index is supposed to depend on the
array size to prevent element out of bounds access. It uses SCMI_ERR_MAX
to check bounds but that can mismatch with the array size. It also
changes the success into -EIO though scmi_linux_errmap is never used in
case of success, it is expected to work for success case too.
It is slightly confusing code as the negative of the error code
is used as index to the buffer. Fix it by negating it at the start and
make it more readable.
Link: https://lore.kernel.org/r/20210707135028.1869642-1-sudeep.holla@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The bus probe callback calls the driver callback without further
checking. Better be safe than sorry and refuse registration of a driver
without a probe function to prevent a NULL pointer exception.
Link: https://lore.kernel.org/r/20210624095059.4010157-2-sudeep.holla@arm.com
Fixes: 933c504424 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the driver core calls the probe callback it already checked that
the devices match, so there is no need to call the match callback again.
Link: https://lore.kernel.org/r/20210624095059.4010157-1-sudeep.holla@arm.com
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add missing header <asm/smp.h> on include/asm/smp_plat.h, as it calls function
cpu_logical_map(). Also include it on kernel/cpufeature.c since it has calls to
functions cpu_panic_kernel() and cpu_die_early().
Both files call functions defined on this header, make the header dependencies
less fragile.
Signed-off-by: Carlos Bilbao <bilbao@vt.edu>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/4325940.LvFx2qVVIh@iron-maiden
Signed-off-by: Will Deacon <will@kernel.org>
When the kernel is built with CONFIG_KASAN_HW_TAGS and the CPU supports
MTE, memory accesses are checked at 16-byte granularity, and
out-of-bounds accesses can result in tag check faults. Our current
implementation of strlen() makes unaligned 16-byte accesses (within a
naturally aligned 4096-byte window), and can trigger tag check faults.
This can be seen at boot time, e.g.
| BUG: KASAN: invalid-access in __pi_strlen+0x14/0x150
| Read at addr f4ff0000c0028300 by task swapper/0/0
| Pointer tag: [f4], memory tag: [fe]
|
| CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-09550-g03c2813535a2-dirty #20
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x0/0x1b0
| show_stack+0x1c/0x30
| dump_stack_lvl+0x68/0x84
| print_address_description+0x7c/0x2b4
| kasan_report+0x138/0x38c
| __do_kernel_fault+0x190/0x1c4
| do_tag_check_fault+0x78/0x90
| do_mem_abort+0x44/0xb4
| el1_abort+0x40/0x60
| el1h_64_sync_handler+0xb0/0xd0
| el1h_64_sync+0x78/0x7c
| __pi_strlen+0x14/0x150
| __register_sysctl_table+0x7c4/0x890
| register_leaf_sysctl_tables+0x1a4/0x210
| register_leaf_sysctl_tables+0xc8/0x210
| __register_sysctl_paths+0x22c/0x290
| register_sysctl_table+0x2c/0x40
| sysctl_init+0x20/0x30
| proc_sys_init+0x3c/0x48
| proc_root_init+0x80/0x9c
| start_kernel+0x640/0x69c
| __primary_switched+0xc0/0xc8
To fix this, we can reduce the (strlen-internal) MIN_PAGE_SIZE to 16
bytes when CONFIG_KASAN_HW_TAGS is selected. This will cause strlen() to
align the base pointer downwards to a 16-byte boundary, and to discard
the additional prefix bytes without counting them. All subsequent
accesses will be 16-byte aligned 16-byte LDPs. While the comments say
the body of the loop will access 32 bytes, this is performed as two
16-byte acceses, with the second made only if the first did not
encounter a NUL byte, so the body of the loop will not over-read across
a 16-byte boundary.
No other string routines are affected. The other str*() routines will
not make any access which straddles a 16-byte boundary, and the mem*()
routines will only make acceses which straddle a 16-byte boundary when
which is entirely within the bounds of the relevant base and size
arguments.
Fixes: 325a1de812 ("arm64: Import updated version of Cortex Strings' strlen")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210712090043.20847-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
doing make install on an Ubuntu that is installed on an LVM will fail to
boot. Turns out that defconfig misses 2 device mapper related configs
for the Ubuntu initramfs.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This fixes a permanent rebuild of the 32 bit vdso. The RPM build process
was first calling 'make bzImage' and 'make modules' as a second step.
This caused a recompilation of vdso32.so, which in turn also changed
the build-id of vmlinux.
Fixes: 779df22487 ("s390/vdso: add minimal compat vdso")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The Logilink VG0022A DVB-T2 stick has these three devices. So to enable
support for this stick in the presence of MEDIA_SUBDRV_AUTOSELECT,
let DVB_USB_AF9035 select the two other drivers.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If a sub device doesn't immediately bind after it was added, emit an
error indication to the kernel log to help debugging. This happens for
example if the needed driver isn't available at all.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
break is not useful after a goto, so delete 'break' after 'goto'.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If an error occurs after a successful 'regulator_enable()' call,
'regulator_disable()' must be called.
Fix the error handling path of the probe accordingly.
Fixes: cb496cd472 ("media: cxd2880-spi: Add optional vcc regulator")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
deleted the repeated word 'the' in the comments.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for capturing embedded data from the sensor. The only
difference with capturing pixel data and embedded data is that we need
to ensure the PIX PROC is disabled for embedded data so that CAL doesn't
repack the data.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
CAL RX has a single sink and a single source pad. To support multiple
streams, we will have multiple source pads (up to 8, one for each
CAL context).
Change the driver to allow creating more source pads and change the code
accordingly to handle multiple source pads. We still keep
CAL_CAMERARX_NUM_SOURCE_PADS as 1, and the behavior is unchanged.
Also rename CAL_CAMERARX_PAD_SOURCE to CAL_CAMERARX_PAD_FIRST_SOURCE to
highlight that it's the first source.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The following patches add multistream support and we will have multiple
video devices using the same camerarx instances. Thus we need
enable/disable refcounting for the camerarx.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We don't have any locking in camerarx for the subdev ops. We have
managed fine so far without locking, but in the future multiple video
capture devices can use the same camerarx, and locking is a must.
Add a mutex to protect the camerarx subdev ops. Some of the functions
were slightly restructured to make lock handling cleaner.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When starting streaming the driver currently programs the buffer
address to the CAL base-address register and assigns the buffer pointer
to ctx->dma.pending. This is not correct, as the buffer is not
"pending", but active, and causes the first buffer to be needlessly
written twice.
Fix this by assigning the buffer pointer to ctx->dma.active.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Somewhere along the way the context uninitialization has gone a bit odd:
* We have cal_ctx_create() but no matching destroy call, but we still
need to call cal_ctx_v4l2_cleanup() for each context.
* We have cal_media_cleanup() which calls cal_ctx_v4l2_cleanup() for all
contexts, but cal_media_init() is not where the contexts are created.
* The order of uninit steps in cal_remove() is different than the error
handling path in cal_probe().
* cal_probe()'s error handling calls cal_ctx_v4l2_cleanup() for each
context, but also calls cal_media_clean(), doing the same context
cleanup twice.
So fix these, by introducing cal_ctx_destroy(), and using that in
appropriate places instead of calling cal_ctx_v4l2_cleanup() in
cal_media_clean(). Also use normal kzalloc (and kfree) instead of devm
version as we anyway do manual cleanup for each context.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Most of the driver has moved from ARRAY_SIZE(cal->phy) to
cal->data->num_csi2_phy, but we have one place left in cal_remove. Also,
checking for cal->phy[i] != NULL is not needed as we always have all the
phys instantiated.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current driver only ever needs 2 DMA contexts (one per PHY), but we
need to use more of the 8 contexts to add support for multiple streams.
Change the code so that we allocate DMA contexts as needed, which at
this time is 1 per PHY, but could be up to 8.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
struct cal_camerarx has fmtinfo field which is used to point to the
current active input format. The only place where the field is used is
cal_camerarx_get_ext_link_freq().
With multiple streams the whole concept of single input format is not
valid anymore, so lets remove the field by looking up the format in
cal_camerarx_get_ext_link_freq(), making it easier to handle the
multistream-case in the following patches.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
CAL driver enumerates mbus codes in the connected subdev to create a
list of supported formats reported to userspace, and initializes
ctx->v_fmt and ctx->fmtinfo to one of those formats.
This works fine for legacy mode, but is not correct for MC mode, and the
list is not even used in MC mode.
Fix this by adding a new function, cal_ctx_v4l2_init_mc_format, which
only initializes ctx->v_fmt and ctx->fmtinfo to a default value.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To make it more obvious if the function in question is dealing with
media-controller API or the legacy API, rename legacy API functions to
cal_legacy_*.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>