The current model uses an integer ID and a fixed size struct for the
parameters of each device option.
The new model allows the device option structs to grow in size over
time. A driver may assume that changes to device option structs will
always be appended.
New device options will also generally have a
`supported_features_mask` so that the driver knows which fields within a
particular device option are enabled.
`gve_device_option.feat_mask` is changed to `required_features_mask`,
and it is a bitmask which must match the value expected by the driver.
This gives the device the ability to break backwards compatibility with
old drivers for certain features by blocking the old drivers from trying
to use the feature.
We maintain ABI compatibility with the old model for
GVE_DEV_OPT_ID_RAW_ADDRESSING in case a driver is using a device which
does not support the new model.
This patch introduces some new terminology:
RDA - Raw DMA Addressing - Buffers associated with SKBs are directly DMA
mapped and read/updated by the device.
QPL - Queue Page Lists - Driver uses bounce buffers which are DMA mapped
with the device for read/write and data is copied from/to SKBs.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using `page_offset` like a boolean means a page may only be split into
two sections. With page sizes larger than 4k, this can be very wasteful.
Future commits in this patchset use `struct gve_rx_slot_page_info` in a
way which supports a fixed buffer size and a variable page size.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Future use cases will have a different padding value.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These functions will be shared by the GQI and DQO variants of the GVNIC
driver as of follow-up patches in this series.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DQO is a new descriptor format for our next generation virtual NIC.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the ARM VIC binding document to DT schema format using
json-schema.
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210617205317.3060163-1-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Since commit 86588296ac ("fdt: Properly handle "no-map" field in the memory region"),
nomap memory is changed to call memblock_mark_nomap() instead of
memblock_remove(). But it only changed the reserved memory with fixed
addr and size case in early_init_dt_reserve_memory_arch(), not
including the dynamical allocation by size case in
early_init_dt_alloc_reserved_memory_arch().
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210611131153.3731147-2-aisheng.dong@nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
For nomap case, the memory block will be removed by memblock_remove()
in early_init_dt_alloc_reserved_memory_arch(). So it's meaningless to
call memblock_free() on error path.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20210611131153.3731147-1-aisheng.dong@nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
The legacy PCI interrupt lines need to be enabled using PCIE_APP_IRNEN bits
13 (INTA), 14 (INTB), 15 (INTC) and 16 (INTD). The old code however was
taking (for example) "13" as raw value instead of taking BIT(13). Define
the legacy PCI interrupt bits using the BIT() macro and then use these in
PCIE_APP_IRN_INT.
Link: https://lore.kernel.org/r/20210106135540.48420-1-martin.blumenstingl@googlemail.com
Fixes: ed22aaaede ("PCI: dwc: intel: PCIe RC controller driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rahul Tanwar <rtanwar@maxlinear.com>
First problem is that optlen is fetched without checking
there is more than one byte to parse.
Fix this by taking care of IPV6_TLV_PAD1 before
fetching optlen (under appropriate sanity checks against len)
Second problem is that IPV6_TLV_PADN checks of zero
padding are performed before the check of remaining length.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: c1412fce7e ("net/ipv6/exthdrs.c: Strict PadN option checking")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart says:
====================
net: macsec: fix key length when offloading
The key length used to copy the key to offloading drivers and to store
it is wrong and was working by chance as it matched the default key
length. But using a different key length fails. Fix it by using instead
the max length accepted in uAPI to store the key and the actual key
length when copying it.
This was tested on the MSCC PHY driver but not on the Atlantic MAC
(looking at the code it looks ok, but testing would be appreciated).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The key length used to store the macsec key was set to MACSEC_KEYID_LEN
(16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.
Fix this by using MACSEC_MAX_KEY_LEN instead (the max length accepted in
uAPI).
Fixes: 27736563ce ("net: atlantic: MACSec egress offload implementation")
Fixes: 9ff40a751a ("net: atlantic: MACSec ingress offload implementation")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The key length used to store the macsec key was set to MACSEC_KEYID_LEN
(16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.
Fix this by using MACSEC_MAX_KEY_LEN instead (the max length accepted in
uAPI).
Fixes: 28c5107aa9 ("net: phy: mscc: macsec support")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The key length used when offloading macsec to Ethernet or PHY drivers
was set to MACSEC_KEYID_LEN (16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.
Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length
accepted in uAPI) and secy->key_len to copy it.
Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When in the round-robin mode, if the tracer detects a change in the
hwlatd thread affinity by an external tool, e.g., taskset, the
round-robin logic is disabled. The disable_migrate variable currently
tracks this.
With the addition of the "mode" config and the mode "none," the
disable_migrate logic is equivalent to switch to the "none" mode.
Hence, instead of using a hidden variable to track this behavior,
switch the mode to none, informing the user about this change.
Link: https://lkml.kernel.org/r/a679af672458d6b1f62252605905c5214030f247.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Provides the "mode" config to the hardware latency detector. hwlatd has
two different operation modes. The default mode is the "round-robin" one,
in which a single hwlatd thread runs, migrating among the allowed CPUs in a
"round-robin" fashion. This is the current behavior.
The "none" sets the allowed cpumask for a single hwlatd thread at the
startup, but skips the round-robin, letting the scheduler handle the
migration.
In preparation to the per-cpu mode.
Link: https://lkml.kernel.org/r/f3b1271262aa030c680e26615c1b9b2d71e55e92.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Clark's email is williams@redhat.com.
No functional change.
Link: https://lkml.kernel.org/r/6fa4b49e17ab8a1ff19c335ab7cde38d8afb0e29.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Modify the netdev_dbg content from int to char * in usbnet_defer_kevent(),
this looks more readable.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
bootconfig is a new feature that appends scripts onto the initrd, and the
kernel executes the scripts as an extended kernel command line.
Need to add tests to test that the happened. To test the bootconfig
properly, the initrd needs to be updated and the kernel rebooted. ktest is
the perfect solution to perform these tests.
Add a example bootconfig.conf in the tools/testing/ktest/examples/include
and example bootconfig scripts in tools/testing/ktest/examples/bootconfig
and also include verifier scripts that ktest will install on the target
and run to make sure that the bootconfig options in the scripts took place
after the target rebooted with the new initrd update.
Link: https://lkml.kernel.org/r/20210618112647.6a81dec5@oasis.local.home
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use the new pci_dev_trylock() helper to simplify our locking.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20210623022824.308041-3-mcgrof@kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Other places in the kernel use this form, and so just
provide a common path for it.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20210623022824.308041-2-mcgrof@kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In the case where the call to vfio_register_group_dev fails the error
return path kfree's mdev_state but not mdev_state->vconfig. Fix this
by kfree'ing mdev_state->vconfig before returning.
Addresses-Coverity: ("Resource leak")
Fixes: 437e41368c ("vfio/mdpy: Convert to use vfio_register_group_dev()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210622183710.28954-1-colin.king@canonical.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Sort out the mess with the local variables in
intel_fbdev_init_bios(). Get rid of all aliasing pointers,
use standard naming/types, and introduce a few more locals
in the loops to avoid the hard to read long struct walks.
While at we also polish the debugs a bit to use the
canonical [CRTC:%d:%s] style.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-6-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Just pass the full atomic state+crtc to the pre-skl watermark
functions, and clean up the types/variable names around the area.
Note that having both .compute_pipe_wm() and .compute_intermediate_wm()
is entirely redundant now. We could unify them to a single vfunc.
But let's do this one step at a time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-5-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit 61ca49a910 ("libceph: don't set global_id until we get an
auth ticket") delayed the setting of global_id too much. It is set
only after all tickets are received, but in pre-nautilus clusters an
auth ticket and the service tickets are obtained in separate steps
(for a total of three MAuth replies). When the service tickets are
requested, global_id is used to build an authorizer; if global_id is
still 0 we never get them and fail to establish the session.
Moving the setting of global_id into protocol implementations. This
way global_id can be set exactly when an auth ticket is received, not
sooner nor later.
Fixes: 61ca49a910 ("libceph: don't set global_id until we get an auth ticket")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
There is no result to pass in msgr2 case because authentication
failures are reported through auth_bad_method frame and in MAuth
case an error is returned immediately.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Since the llb allocation has a fixed size, let's grab it before
the potentially variable sized cfb. That should avoid some allocation
failure cases once we allow different compression ratios for FBC1.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Not much point in dynamically allocating the line length
buffer mm node that I can see. Just embed it directly like
we do the for the cfb node. One less failure point to worry
about.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
There is an assignment of ancillary->mode to itself which looks
dubious since the proceeding comment states that the speed and
mode is taken over from the SPI main device, indicating that
ancillary->mode should assigned using the value spi->mode.
Fix this.
Addresses-Coverity: ("Self assignment")
Fixes: 0c79378c01 ("spi: add ancillary device support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210623172300.161484-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently IRQ_CLEAR register is marked as write-only, however using
regmap_update_bits on this register will have some side effects.
so mark IRQ_CLEAR register appropriately as readable and volatile.
Fixes: da0363f7bf ("ASoC: qcom: Fix for DMA interrupt clear reg overwriting")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210624092153.5771-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct rdma_id_private contains three bit-fields, tos_set,
timeout_set, and min_rnr_timer_set. These are set by accessor functions
without any synchronization. If two or all accessor functions are invoked
in close proximity in time, there will be Read-Modify-Write from several
contexts to the same variable, and the result will be intermittent.
Fixed by protecting the bit-fields by the qp_mutex in the accessor
functions.
The consumer of timeout_set and min_rnr_timer_set is in
rdma_init_qp_attr(), which is called with qp_mutex held for connected
QPs. Explicit locking is added for the consumers of tos and tos_set.
This commit depends on ("RDMA/cma: Remove unnecessary INIT->INIT
transition"), since the call to rdma_init_qp_attr() from
cma_init_conn_qp() does not hold the qp_mutex.
Fixes: 2c1619edef ("IB/cma: Define option to set ack timeout and pack tos_set")
Fixes: 3aeffc46af ("IB/cma: Introduce rdma_set_min_rnr_timer()")
Link: https://lore.kernel.org/r/1624369197-24578-3-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rdma_create_qp(), a connected QP will be transitioned to the INIT
state.
Afterwards, the QP will be transitioned to the RTR state by the
cma_modify_qp_rtr() function. But this function starts by performing an
ib_modify_qp() to the INIT state again, before another ib_modify_qp() is
performed to transition the QP to the RTR state.
Hence, there is no need to transition the QP to the INIT state in
rdma_create_qp().
Link: https://lore.kernel.org/r/1624369197-24578-2-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Steen Hegelund says:
====================
Adding the Sparx5i Switch Driver
This series provides the Microchip Sparx5i Switch Driver
The SparX-5 Enterprise Ethernet switch family provides a rich set of
Enterprise switching features such as advanced TCAM-based VLAN and QoS
processing enabling delivery of differentiated services, and security
through TCAMbased frame processing using versatile content aware processor
(VCAP). IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K IPv6
(S,G) multicast groups. L3 security features include source guard and
reverse path forwarding (uRPF) tasks. Additional L3 features include
VRF-Lite and IP tunnels (IP over GRE/IP).
The SparX-5 switch family features a highly flexible set of Ethernet ports
with support for 10G and 25G aggregation links, QSGMII, USGMII, and
USXGMII. The device integrates a powerful 1 GHz dual-core ARM® Cortex®-A53
CPU enabling full management of the switch and advanced Enterprise
applications.
The SparX-5 switch family targets managed Layer 2 and Layer 3 equipment in
SMB, SME, and Enterprise where high port count 1G/2.5G/5G/10G switching
with 10G/25G aggregation links is required.
The SparX-5 switch family consists of following SKUs:
VSC7546 SparX-5-64 supports up to 64 Gbps of bandwidth with the following
primary port configurations.
- 6 ×10G
- 16 × 2.5G + 2 × 10G
- 24 × 1G + 4 × 10G
VSC7549 SparX-5-90 supports up to 90 Gbps of bandwidth with the following
primary port configurations.
- 9 × 10G
- 16 × 2.5G + 4 × 10G
- 48 × 1G + 4 × 10G
VSC7552 SparX-5-128 supports up to 128 Gbps of bandwidth with the
following primary port configurations.
- 12 × 10G
- 6 x 10G + 2 x 25G
- 16 × 2.5G + 8 × 10G
- 48 × 1G + 8 × 10G
VSC7556 SparX-5-160 supports up to 160 Gbps of bandwidth with the
following primary port configurations.
- 16 × 10G
- 10 × 10G + 2 × 25G
- 16 × 2.5G + 10 × 10G
- 48 × 1G + 10 × 10G
VSC7558 SparX-5-200 supports up to 200 Gbps of bandwidth with the
following primary port configurations.
- 20 × 10G
- 8 × 25G
In addition, the device supports one 10/100/1000/2500/5000 Mbps
SGMII/SerDes node processor interface (NPI) Ethernet port.
Time sensitive networking (TSN) is supported through a comprehensive set of
features including frame preemption, cut-through, frame replication and
elimination for reliability, enhanced scheduling: credit-based shaping,
time-aware shaping, cyclic queuing, and forwarding, and per-stream policing
and filtering.
Together with IEEE 1588 and IEEE 802.1AS support, this guarantees
low-latency deterministic networking for Industrial Ethernet.
The Sparx5i support is developed on the PCB134 and PCB135 evaluation boards.
- PCB134 main networking features:
- 12x SFP+ front 10G module slots (connected to Sparx5i through SFI).
- 8x SFP28 front 25G module slots (connected to Sparx5i through SFI high
speed).
- Optional, one additional 10/100/1000BASE-T (RJ45) Ethernet port
(on-board VSC8211 PHY connected to Sparx5i through SGMII).
- PCB135 main networking features:
- 48x1G (10/100/1000M) RJ45 front ports using 12xVSC8514 QuadPHY’s each
connected to VSC7558 through QSGMII.
- 4x10G (1G/2.5G/5G/10G) RJ45 front ports using the AQR407 10G QuadPHY
each port connects to VSC7558 through SFI.
- 4x SFP28 25G module slots on back connected to VSC7558 through SFI high
speed.
- Optional, one additional 1G (10/100/1000M) RJ45 port using an on-board
VSC8211 PHY, which can be connected to VSC7558 NPI port through SGMII
using a loopback add-on PCB)
This series provides support for:
- SFPs and DAC cables via PHYLINK with a number of 5G, 10G and 25G
devices and media types.
- Port module configuration for 10M to 25G speeds with SGMII, QSGMII,
1000BASEX, 2500BASEX and 10GBASER as appropriate for these modes.
- SerDes configuration via the Sparx5i SerDes driver (see below).
- Host mode providing register based injection and extraction.
- Switch mode providing MAC/VLAN table learning and Layer2 switching
offloaded to the Sparx5i switch.
- STP state, VLAN support, host/bridge port mode, Forwarding DB, and
configuration and statistics via ethtool.
More support will be added at a later stage.
The Sparx5i Chip Register Model can be browsed at this location:
https://github.com/microchip-ung/sparx-5_reginfo
and the datasheet is available here:
https://ww1.microchip.com/downloads/en/DeviceDoc/SparX-5_Family_L2L3_Enterprise_10G_Ethernet_Switches_Datasheet_00003822B.pdf
The series depends on the following series currently on their way
into the kernel:
- 25G Base-R phy mode
Link: https://lore.kernel.org/r/20210611125453.313308-1-steen.hegelund@microchip.com/
- Sparx5 Reset Driver
Link: https://lore.kernel.org/r/20210416084054.2922327-1-steen.hegelund@microchip.com/
ChangeLog:
v5:
- cover letter
- updated the description to match the latest data sheets
- basic driver
- added error message in case of reset controller error
- port struct: replacing has_sfp with inband, adding pause_adv
- host mode
- port cleanup: unregisters netdevs and then removes phylink etc
- checking for pause_adv when comparing port config changes
- getting duplex and pause state in the link_up callback.
- getting inband, autoneg and pause_adv config in the pcs_config
callback.
- port
- use only the pause_adv bits when getting aneg status
- use the inband state when updating the PCS and port config
v4:
- basic driver:
Using devm_reset_control_get_optional_shared to get the reset
control, and let the reset framework check if it is valid.
- host mode (phylink):
Use the PCS operations to get state and update configuration.
Removed the setting of interface modes. Let phylink control this.
Using the new 5gbase-r and 25gbase-r modes.
Using a helper function to check if one of the 3 base-r modes has
been selected.
Currently it will not be possible to change the interface mode by
changing the speed (e.g via ethtool). This will be added later.
v3:
- basic driver:
- removed unneeded braces
- release reference to ports node after use
- use dev_err_probe to handle DEFER
- update error value when bailing out (a few cases)
- updated formatting of port struct and grouping of bool values
- simplified the spx5_rmw and spx5_inst_rmw inline functions
- host mode (netdev):
- removed lockless flag
- added port timer init
- host mode (packet - manual injection):
- updated error counters in error situations
- implemented timer handling of watermark threshold: stop and
restart netif queues.
- fixed error message handling (rate limited)
- fixed comment style error
- used DIV_ROUND_UP macro
- removed a debug message for open ports
v2:
- Updated bindings:
- drop minItems for the reg property
- Statistics implementation:
- Reorganized statistics into ethtool groups:
eth-phy, eth-mac, eth-ctrl, rmon
as defined by the IEEE 802.3 categories and RFC 2819.
- The remaining statistics are provided by the classic ethtool
statistics command.
- Hostmode support:
- Removed netdev renaming
- Validate ethernet address in sparx5_set_mac_address()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides the configuration for the currently available evaluation
boards PCB134 and PCB135.
The series depends on the following series currently on its way
into the kernel:
- Sparx5 Reset Driver
Link: https://lore.kernel.org/r/20210416084054.2922327-1-steen.hegelund@microchip.com/
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>