No functional change intended. At present, 'r' will always be -EBUSY
on a control transfer to the 'out' label.
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-5-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functional change intended.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A survey of the callsites reveals that they all ensure the vCPU is in
guest mode before calling kvm_check_nested_events. Remove this dead
code so that the only negative value this function returns (at the
moment) is -EBUSY.
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-2-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test that nested TSC scaling works as expected with both L1 and L2
scaled.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-12-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the TSC offset and multiplier on nested transitions and expose
the TSC scaling feature to L1.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-11-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently vmx_vcpu_load_vmcs() writes the TSC_MULTIPLIER field of the
VMCS every time the VMCS is loaded. Instead of doing this, set this
field from common code on initialization and whenever the scaling ratio
changes.
Additionally remove vmx->current_tsc_ratio. This field is redundant as
vcpu->arch.tsc_scaling_ratio already tracks the current TSC scaling
ratio. The vmx->current_tsc_ratio field is only used for avoiding
unnecessary writes but it is no longer needed after removing the code
from the VMCS load path.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Message-Id: <20210607105438.16541-1-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The write_l1_tsc_offset() callback has a misleading name. It does not
set L1's TSC offset, it rather updates the current TSC offset which
might be different if a nested guest is executing. Additionally, both
the vmx and svm implementations use the same logic for calculating the
current TSC before writing it to hardware.
Rename the function and move the common logic to the caller. The vmx/svm
specific code now merely sets the given offset to the corresponding
hardware structure.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-9-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When L2 is entered we need to "merge" the TSC multiplier and TSC offset
values of 01 and 12 together.
The merging is done using the following equations:
offset_02 = ((offset_01 * mult_12) >> shift_bits) + offset_12
mult_02 = (mult_01 * mult_12) >> shift_bits
Where shift_bits is kvm_tsc_scaling_ratio_frac_bits.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-8-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to implement as much of the nested TSC scaling logic as
possible in common code, we need these vendor callbacks for retrieving
the TSC offset and the TSC multiplier that L1 has set for L2.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-7-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes kvm_scale_tsc() needs to use the current scaling ratio and
other times (like when reading the TSC from user space) it needs to use
L1's scaling ratio. Have the caller specify this by passing the ratio as
a parameter.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-5-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All existing code uses kvm_compute_tsc_offset() passing L1 TSC values to
it. Let's document this by renaming it to kvm_compute_l1_tsc_offset().
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-4-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store L1's scaling ratio in the kvm_vcpu_arch struct like we already do
for L1's TSC offset. This allows for easy save/restore when we enter and
then exit the nested guest.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-3-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function is needed for KVM's nested virtualization. The nested TSC
scaling implementation requires multiplying the signed TSC offset with
the unsigned TSC multiplier.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-2-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the TDP MMU is in use, wait to allocate the rmaps until the shadow
MMU is actually used. (i.e. a nested VM is launched.) This saves memory
equal to 0.2% of guest memory in cases where the TDP MMU is used and
there are no nested guests involved.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-8-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If only the TDP MMU is being used to manage the memory mappings for a VM,
then many rmap operations can be skipped as they are guaranteed to be
no-ops. This saves some time which would be spent on the rmap operation.
It also avoids acquiring the MMU lock in write mode for many operations.
This makes it safe to run the VM without rmaps allocated, when only
using the TDP MMU and sets the stage for waiting to allocate the rmaps
until they're needed.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a field to control whether new memslots should have rmaps allocated
for them. As of this change, it's not safe to skip allocating rmaps, so
the field is always set to allocate rmaps. Future changes will make it
safe to operate without rmaps, using the TDP MMU. Then further changes
will allow the rmaps to be allocated lazily when needed for nested
oprtation.
No functional change expected.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new lock to protect the arch-specific fields of memslots if they
need to be modified in a kvm->srcu read critical section. A future
commit will use this lock to lazily allocate memslot rmaps for x86.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-5-bgardon@google.com>
[Add Documentation/ hunk. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Factor out copying kvm_memslots from allocating the memory for new ones
in preparation for adding a new lock to protect the arch-specific fields
of the memslots.
No functional change intended.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Small refactor to facilitate allocating rmaps for all memslots at once.
No functional change expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Small code deduplication. No functional change expected.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, when dirty logging is started in initially-all-set mode,
we write protect huge pages to prepare for splitting them into
4K pages, and leave normal pages untouched as the logging will
be enabled lazily as dirty bits are cleared.
However, enabling dirty logging lazily is also feasible for huge pages.
This not only reduces the time of start dirty logging, but it also
greatly reduces side-effect on guest when there is high dirty rate.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20210429034115.35560-3-zhukeqian1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for write protecting large page lazily during dirty log tracking,
for which we will only need to write protect gfns at large page
granularity.
No functional or performance change expected.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20210429034115.35560-2-zhukeqian1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that kvm_hv_flush_tlb() has been patched to support XMM hypercall
inputs, we can start advertising this feature to guests.
Cc: Alexander Graf <graf@amazon.com>
Cc: Evgeny Iakovlev <eyakovl@amazon.de>
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <e63fc1c61dd2efecbefef239f4f0a598bd552750.1622019134.git.sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V supports the use of XMM registers to perform fast hypercalls.
This allows guests to take advantage of the improved performance of the
fast hypercall interface even though a hypercall may require more than
(the current maximum of) two input registers.
The XMM fast hypercall interface uses six additional XMM registers (XMM0
to XMM5) to allow the guest to pass an input parameter block of up to
112 bytes.
Add framework to read from XMM registers in kvm_hv_hypercall() and use
the additional hypercall inputs from XMM registers in kvm_hv_flush_tlb()
when possible.
Cc: Alexander Graf <graf@amazon.com>
Co-developed-by: Evgeny Iakovlev <eyakovl@amazon.de>
Signed-off-by: Evgeny Iakovlev <eyakovl@amazon.de>
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <fc62edad33f1920fe5c74dde47d7d0b4275a9012.1622019134.git.sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As of now there are 7 parameters (and flags) that are used in various
hyper-v hypercall handlers. There are 6 more input/output parameters
passed from XMM registers which are to be added in an upcoming patch.
To make passing arguments to the handlers more readable, capture all
these parameters into a single structure.
Cc: Alexander Graf <graf@amazon.com>
Cc: Evgeny Iakovlev <eyakovl@amazon.de>
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <273f7ed510a1f6ba177e61b73a5c7bfbee4a4a87.1622019133.git.sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-v XMM fast hypercalls use XMM registers to pass input/output
parameters. To access these, hyperv.c can reuse some FPU register
accessors defined in emulator.c. Move them to a common location so both
can access them.
While at it, reorder the parameters of these accessor methods to make
them more readable.
Cc: Alexander Graf <graf@amazon.com>
Cc: Evgeny Iakovlev <eyakovl@amazon.de>
Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Message-Id: <01a85a6560714d4d3637d3d86e5eba65073318fa.1622019133.git.sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function 'is_nx_huge_page_enabled' is called only by kvm/mmu, so make
it as inline fucntion and remove the unnecessary declaration.
Cc: Ben Gardon <bgardon@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Message-Id: <1622102271-63107-1-git-send-email-zhangshaokun@hisilicon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CHECK_EXTENSION ioctl can return any negative value on error,
and not necessarily -1. Change the assertion to reflect that.
Signed-off-by: Fuad Tabba <tabba@google.com>
Message-Id: <20210615150443.1183365-1-tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use cpuidle context helpers to switch to using DAIF.IF instead
of PMR to mask interrupts, ensuring that we suspend with
interrupts being able to reach the CPU interface.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210615111227.2454465-5-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The PSCI CPU suspend code isn't aware of the PMR vs DAIF game,
resulting in a system that locks up if entering CPU suspend
with GICv3 pNMI enabled.
To save the day, teach the suspend code about our new cpuidle
context helpers, which will do everything that's required just
like the usual WFI cpuidle code.
This fixes my Altra system, which would otherwise lock-up at
boot time when booted with irqchip.gicv3_pseudo_nmi=1.
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210615111227.2454465-4-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that we have helpers that are aware of the pseudo-NMI
feature, introduce them to cpu_do_idle(). This allows for
some nice cleanup.
No functional change intended.
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210615111227.2454465-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
As we need to start doing some additional work on all idle
paths, let's introduce a set of macros that will perform
the work related to the GICv3 pseudo-NMI idle entry exit.
Stubs are introduced to 32bit ARM for compatibility.
As these helpers are currently unused, there is no functional
change.
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210615111227.2454465-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmDLL74ACgkQnJ2qBz9k
QNleSAf/XikH+tsM6K9yDEeU93GGSqKUB71n9clSQBIiGZ7/UliG0wotrUjec9Rg
vBTZlh3JEdfboeBei+mG3hmOdAoYK4HMsJJikqRGPyWOTujh1eOZlT1LOXaY5zNM
631A9pWe8edlpr4Mq7Wb4nO4FToEZ91iXDLliFF371aV8kP/yuv5ZjHwIn5Pt5gI
DPnWwaJ+meW9KZ4gVKAfvZLVkKFat2xJ9r2LDpqbIkH9SBcfjBmeHOy0gFyCKx6l
yma5iANgtWLhesP6ZwSeaRb1+T9altSLCCFZrYdKH9PXTMFUqzrbiZ8tfVmllePZ
GaUOWcHYiLmvqvXnaAREiHnMFT6prg==
=kevs
-----END PGP SIGNATURE-----
Merge tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and fanotify fixes from Jan Kara:
"A fixup finishing disabling of quotactl_path() syscall (I've missed
archs using different way to declare syscalls) and a fix of an fd leak
in error handling path of fanotify"
* tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: finish disable quotactl_path syscall
fanotify: fix copy_event_to_user() fid error clean up
Instead of attaching the last reported rate to tx packets, use
ieee80211_tx_status_ext to immediately pass the rate to mac80211 after
receiving it from the firmware.
Preparation for implementing full tx status reporting
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use ieee80211_tx_status_ext instead of ieee80211_free_skb and
ieee80211_tx_status. This makes it compatible with 802.3 encap offload
and improves performance by removing a redundant sta lookup
Signed-off-by: Felix Fietkau <nbd@nbd.name>
io-wq defaults to per-node masks for IO workers. This works fine by
default, but isn't particularly handy for workloads that prefer more
specific affinities, for either performance or isolation reasons.
This adds IORING_REGISTER_IOWQ_AFF that allows the user to pass in a CPU
mask that is then applied to IO thread workers, and an
IORING_UNREGISTER_IOWQ_AFF that simply resets the masks back to the
default of per-node.
Note that no care is given to existing IO threads, they will need to go
through a reschedule before the affinity is correct if they are already
running or sleeping.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The continue statement in the for-loop is redundant. Re-work the hw_lock
check to remove it.
Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix the following compilation warning if PTP_1588_CLOCK is not enabled
drivers/net/ethernet/intel/ice/ice_ptp.h:149:1:
error: return type defaults to ‘int’ [-Werror=return-type]
ice_ptp_request_ts(struct ice_ptp_tx *tx, struct sk_buff *skb)
Fixes: ea9b847cda ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ptp_read_system_prets and ptp_read_system_postts functions already
check for the NULL value of the ptp_system_timestamp structure pointer.
There is no need to check this manually in the ice driver code. Remove
the checks.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Counter
------
First part of general rework of counter subsystem to add a chrdev interface
for event drive data capture. Most of it will hopefully land next cycle.
* Consolidate documentation to avoid multiple copies of same docs in per
device files.
* Constify various arrays etc across subsystem.
* 104-quad-8:
- Annotate the module config parameter to avoid using it when kernel is
locked down.
- Spelling and trivial comment drops etc
* Intel QEP
- Follow up cleanups of trivial stuff from initial patch series.
IIO
---
Includes some cleanups as part of two ongoing audits
- runtime pm usage in IIO.
- Insufficient alignment on buffers passed to
iio_push_to_buffers_with_timstamp()
New device support
* bosch,bmc150
- Add ID for BMA253
Minor features / cleanups / minor fixes / late breaking fixes
* iio_push_to_buffers_with_timestamp() alignment fixes.
This set includes those where the best option is to mark the buffer as
__aligned(8). Normally this choice was made because there is too high a degree
of possible variation in number of channels enabled to be able to guarantee
the timestamp was always in the same location. This ruled out the more
obvious structure form used in other drivers. Only one small class of
related issues have patches under review and we can finally tighten up the
explicit rules to reflect the hidden requirement.
* dummy
- Kconfig build dependency fix.
* adi,ad_sigma_delta
- General devm related simplifications for these devices.
* adi,adf4350
- Fix some missing cleanup on error path.
* adi,adis, ADC drivers.
- Clean out unneeded spi_set_drvdata()
* ams-taos,tcs3472
- Fix a potential free of an irq that was never allocated.
* atlas,sensor
- Drop unbalanced runtime pm call and use pm_runtime_resume_and_get()
to reduce boilerplate.
* bosch,bma180
- Fix bandwidth register values used.
* bosch,bmc150
- Fix wrong pointer being dereferenced in remove.
- Stop device trying unregister itself rather than the second device.
- Refactor ACPI second device handing.
- Add support for DUAL250E ACPI HID.
- Move some stuff into the header to enable following patches to not
add additional accessor functions. Drop existing accessors.
- Add support for hinge angle setting with DUAL250E ACPI DSM to ensure
keyboard and touchpad enabled correctly when in laptop mode and disabled
otherwise.
- Add label attr for the multiple sensor locations with DUAL250E ACPI HID.
- Fix scale units for bma222
- Various reordering of devices supported lists to be alphabetical order.
- Drop unnecessary duplicated chip_info_tbl[] entries.
- Document that some devices have two interrupts, even if not currently
used by the driver.
- Move bma254 over to the bma255 driver.
- Move to more consistent scale values, based on assumption that some
datasheets use lower precision in their calculations in comparison
with others.
* hid-sensors
- Use namespaces for exported symbols.
- Update includes using manual inspection of output of the
include-what-you-use tool.
* invensense,icp10100
- Drop unbalanced runtime pm put. Use pm_runtime_resume_and_get() to cleanly
handle potential error.
* invensense,mpu6050
- Drop use of %hhx string formatting.
- runtime pm boilerplate removal and drop an unbalanced call in remove.
* liteon,ltr501
- Fix inaccurate volatile register list.
- Fix wrong mode bit.
- Add a missing leXX_to_cpu() conversion.
- Mark ltr501_chip_info structure as const.
* pulsed-light-lidar:
- Boilerplate removal using runtime_pm_resume_and_get()
* scmi-sensors
- Formatting of SPDX fix.
* silabs,si1133
- Fix a string format warning.
- Drop remaining uses of %hhx string formatting.
* silabs,si1145
- Drop use of %hhx string formatting.
* ti,ads1015
- Drop unbalanced runtime pm call in remove and reduce boilerplate.
-----BEGIN PGP SIGNATURE-----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=xwQK
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.14b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of Counter and IIO new device support, cleanups etc for 5.14
Counter
------
First part of general rework of counter subsystem to add a chrdev interface
for event drive data capture. Most of it will hopefully land next cycle.
* Consolidate documentation to avoid multiple copies of same docs in per
device files.
* Constify various arrays etc across subsystem.
* 104-quad-8:
- Annotate the module config parameter to avoid using it when kernel is
locked down.
- Spelling and trivial comment drops etc
* Intel QEP
- Follow up cleanups of trivial stuff from initial patch series.
IIO
---
Includes some cleanups as part of two ongoing audits
- runtime pm usage in IIO.
- Insufficient alignment on buffers passed to
iio_push_to_buffers_with_timstamp()
New device support
* bosch,bmc150
- Add ID for BMA253
Minor features / cleanups / minor fixes / late breaking fixes
* iio_push_to_buffers_with_timestamp() alignment fixes.
This set includes those where the best option is to mark the buffer as
__aligned(8). Normally this choice was made because there is too high a degree
of possible variation in number of channels enabled to be able to guarantee
the timestamp was always in the same location. This ruled out the more
obvious structure form used in other drivers. Only one small class of
related issues have patches under review and we can finally tighten up the
explicit rules to reflect the hidden requirement.
* dummy
- Kconfig build dependency fix.
* adi,ad_sigma_delta
- General devm related simplifications for these devices.
* adi,adf4350
- Fix some missing cleanup on error path.
* adi,adis, ADC drivers.
- Clean out unneeded spi_set_drvdata()
* ams-taos,tcs3472
- Fix a potential free of an irq that was never allocated.
* atlas,sensor
- Drop unbalanced runtime pm call and use pm_runtime_resume_and_get()
to reduce boilerplate.
* bosch,bma180
- Fix bandwidth register values used.
* bosch,bmc150
- Fix wrong pointer being dereferenced in remove.
- Stop device trying unregister itself rather than the second device.
- Refactor ACPI second device handing.
- Add support for DUAL250E ACPI HID.
- Move some stuff into the header to enable following patches to not
add additional accessor functions. Drop existing accessors.
- Add support for hinge angle setting with DUAL250E ACPI DSM to ensure
keyboard and touchpad enabled correctly when in laptop mode and disabled
otherwise.
- Add label attr for the multiple sensor locations with DUAL250E ACPI HID.
- Fix scale units for bma222
- Various reordering of devices supported lists to be alphabetical order.
- Drop unnecessary duplicated chip_info_tbl[] entries.
- Document that some devices have two interrupts, even if not currently
used by the driver.
- Move bma254 over to the bma255 driver.
- Move to more consistent scale values, based on assumption that some
datasheets use lower precision in their calculations in comparison
with others.
* hid-sensors
- Use namespaces for exported symbols.
- Update includes using manual inspection of output of the
include-what-you-use tool.
* invensense,icp10100
- Drop unbalanced runtime pm put. Use pm_runtime_resume_and_get() to cleanly
handle potential error.
* invensense,mpu6050
- Drop use of %hhx string formatting.
- runtime pm boilerplate removal and drop an unbalanced call in remove.
* liteon,ltr501
- Fix inaccurate volatile register list.
- Fix wrong mode bit.
- Add a missing leXX_to_cpu() conversion.
- Mark ltr501_chip_info structure as const.
* pulsed-light-lidar:
- Boilerplate removal using runtime_pm_resume_and_get()
* scmi-sensors
- Formatting of SPDX fix.
* silabs,si1133
- Fix a string format warning.
- Drop remaining uses of %hhx string formatting.
* silabs,si1145
- Drop use of %hhx string formatting.
* ti,ads1015
- Drop unbalanced runtime pm call in remove and reduce boilerplate.
* tag 'iio-for-5.14b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (76 commits)
iio: light: tcs3472: do not free unallocated IRQ
iio: accel: bmc150: Use more consistent and accurate scale values
iio: hid-sensors: Update header includes
iio: pressure: icp10100: Balance runtime pm + use pm_runtime_resume_and_get()
iio: prox: pulsed-light-v2: Use pm_runtime_resume_and_get()
iio: chemical: atlas-sensor: Balance runtime pm + pm_runtime_resume_and_get()
iio: adc: ads1015: Balance runtime pm + pm_runtime_resume_and_get()
iio: imu: mpu6050: Balance runtime pm + use pm_runtime_resume_and_get()
iio: hid-sensors: lighten exported symbols by moving to IIO_HID namespace
iio: prox: isl29501: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: vcnl4000: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: magn: rm3100: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: adc: mxs-lradc: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: hx711: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: at91-sama5d2: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
counter: interrupt-cnt: Add const qualifier for actions_list array
iio: ltr501: mark ltr501_chip_info as const
iio: ltr501: ltr501_read_ps(): add missing endianness conversion
...