Commit graph

1,058,063 commits

Author SHA1 Message Date
Sander Vanheule
0df0240946
regmap: mdio: Reject invalid addresses
When an invalid register offset is provided, the upper bits are silently
discarded. Change this to return -ENXIO instead, to help catch potential
bugs.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://lore.kernel.org/r/047007e0e9fb596480829f11f8c7e6281d235c70.1623244066.git.sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-14 15:00:29 +01:00
Sander Vanheule
ce62df2290
regmap: mdio: Fix regmap_bus pointer constness
A const qualifier was omitted in the declaration of the regmap_bus
pointer, resulting in the following errors:

drivers/base/regmap/regmap-mdio.c: In function ‘__regmap_init_mdio’:
drivers/base/regmap/regmap-mdio.c:87:7: warning: assignment discards
‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
   87 |   bus = &regmap_mdio_c22_bus;
      |       ^
drivers/base/regmap/regmap-mdio.c:89:7: warning: assignment discards
‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
   89 |   bus = &regmap_mdio_c45_bus;
      |       ^

Fix this by ensuring the pointer has the same qualifiers as the assigned
values.

Fixes: f083be9db0 ("regmap: mdio: Add clause-45 support")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://lore.kernel.org/r/f304ca638ffdc66d4803a6df1f75436894bd1d5f.1623244066.git.sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-14 15:00:28 +01:00
Jaroslav Kysela
12ffd72682
ASoC: soc-pcm: fix the return value in dpcm_apply_symmetry()
In case, where the loops are not executed for a reason, the uninitialized
variable 'err' is returned to the caller. Make code fully predictible
and assign zero in the declaration.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20210614071746.1787072-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-14 14:59:17 +01:00
Yang Yingliang
68912ebf4d
ASoC: axi-spdif: Use devm_platform_get_and_ioremap_resource()
Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210610133120.141405-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-14 14:59:16 +01:00
Yang Yingliang
9494d05997
ASoC: atmel-classd: Use devm_platform_get_and_ioremap_resource()
Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210611022115.3583765-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-14 14:59:15 +01:00
Yang Yingliang
be374dc0b5
ASoC: mchp-i2s-mcc: Use devm_platform_get_and_ioremap_resource()
Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210611044256.3899583-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-14 14:59:14 +01:00
Mark Brown
a918e29174
Merge series "ASoC: codecs: add wcd938x support" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds support for Qualcomm WCD938X codec.

Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire devices, RX and
TX respectively supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
7 x TX diff inputs, 8 DMICs and MBHC.

Eventhough this device has two SoundWire devices, only tx device has
access to main codec Control/Status Registers!

For codec driver to be functional it would need both tx and rx Soundwire devices
to be up and this is taken care by using device component framework and device-links
are used to ensure proper pm dependencies. Ex tx does not enter suspend
before rx or codec is suspended.

This patchset along with other SoundWire patches on the list
have been tested on SM8250 MTP device.

Thanks,
srini

Changes since v8:
 - moved Kconfig and Makefile changes to last patch as suggested by Mark
 - removed array of enums and used static entries instead. Suggested by Mark
 - return true if put succeeds, Suggested by Mark
 - removed some unneeded semi-colons in switch

Srinivas Kandagatla (9):
  ASoC: dt-bindings: wcd938x: add bindings for wcd938x
  ASoC: codecs: wcd-clsh: add new version support
  ASoC: codecs: wcd938x: add basic driver
  ASoC: dt-bindings: wcd938x-sdw: add bindings for wcd938x-sdw
  ASoC: codecs: wcd938x-sdw: add SoundWire driver
  ASoC: codecs: wcd938x: add basic controls
  ASoC: codecs: wcd938x: add playback dapm widgets
  ASoC: codecs: wcd938x: add capture dapm widgets
  ASoC: codecs: wcd938x: add audio routing and Kconfig

 .../bindings/sound/qcom,wcd938x-sdw.yaml      |   70 +
 .../bindings/sound/qcom,wcd938x.yaml          |  146 +
 sound/soc/codecs/Kconfig                      |   14 +
 sound/soc/codecs/Makefile                     |    4 +
 sound/soc/codecs/wcd-clsh-v2.c                |  348 +-
 sound/soc/codecs/wcd-clsh-v2.h                |   16 +
 sound/soc/codecs/wcd938x-sdw.c                |  315 ++
 sound/soc/codecs/wcd938x.c                    | 3753 +++++++++++++++++
 sound/soc/codecs/wcd938x.h                    |  720 ++++
 9 files changed, 5376 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
 create mode 100644 sound/soc/codecs/wcd938x-sdw.c
 create mode 100644 sound/soc/codecs/wcd938x.c
 create mode 100644 sound/soc/codecs/wcd938x.h

--
2.21.0
2021-06-14 14:58:52 +01:00
Even Xu
aa59d6bb5e HID: intel-ish-hid: ipc: Specify that EHL no cache snooping
Specify that EHL doesn't support DMA cache snooping.

Acked-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-06-14 15:55:09 +02:00
Even Xu
4aae88b9a9 HID: intel-ish-hid: ishtp: Add dma_no_cache_snooping() callback
Different platforms have different DMA capability, on most of
platforms, DMA support cache snooping. But few platforms,
such as ElkhartLake (EHL), don't support cache snooping
which requires cache flush from driver.

So add a hardware level callback to let ishtp driver know if cache
flush is needed.

As most of platform support cache snooping, so driver will not
do cache flush by default, until platform implements this callback
and return true explicitly.

Acked-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-06-14 15:55:09 +02:00
Even Xu
65e4122d2e HID: intel-ish-hid: Set ISH driver depends on x86
During ISH DMA enabling, some platforms (such as EHL) don't
support cache snooping, driver needs involve clflush_cache_range
API which isn't supported by all archs (such as ARM).

Considering ISH only exists on Intel platforms, add the dependence
in Kconfig to avoid build warnings or errors on other archs.

Acked-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-06-14 15:55:09 +02:00
Viresh Kumar
771fac5e26 Revert "cpufreq: CPPC: Add support for frequency invariance"
This reverts commit 4c38f2df71.

There are few races in the frequency invariance support for CPPC driver,
namely the driver doesn't stop the kthread_work and irq_work on policy
exit during suspend/resume or CPU hotplug.

A proper fix won't be possible for the 5.13-rc, as it requires a lot of
changes. Lets revert the patch instead for now.

Fixes: 4c38f2df71 ("cpufreq: CPPC: Add support for frequency invariance")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-14 15:55:02 +02:00
Rafael J. Wysocki
3f491a28b1 Merge back ACPI power management material for v5.14. 2021-06-14 15:37:49 +02:00
Zoltan Tamas Vajda
b5539722eb HID: hid-input: add Surface Go battery quirk
The Elantech touchscreen/digitizer in the Surface Go mistakenly reports
having a battery. This results in a low battery message every time you
try to use the pen.

This patch adds a quirk to ignore the non-existent battery and
gets rid of the false low battery messages.

Signed-off-by: Zoltan Tamas Vajda <zoltan.tamas.vajda@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-06-14 15:37:16 +02:00
Austin Kim
f8e5388a9d HID: intel-ish-hid: Fix minor typos in comments
Change "poiner" to "pointer" in comments.

Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-06-14 15:09:47 +02:00
Michael Ellerman
e41d6c3f4f powerpc/signal64: Copy siginfo before changing regs->nip
In commit 96d7a4e06f ("powerpc/signal64: Rewrite handle_rt_signal64()
to minimise uaccess switches") the 64-bit signal code was rearranged to
use user_write_access_begin/end().

As part of that change the call to copy_siginfo_to_user() was moved
later in the function, so that it could be done after the
user_write_access_end().

In particular it was moved after we modify regs->nip to point to the
signal trampoline. That means if copy_siginfo_to_user() fails we exit
handle_rt_signal64() with an error but with regs->nip modified, whereas
previously we would not modify regs->nip until the copy succeeded.

Returning an error from signal delivery but with regs->nip updated
leaves the process in a sort of half-delivered state. We do immediately
force a SEGV in signal_setup_done(), called from do_signal(), so the
process should never run in the half-delivered state.

However that SEGV is not delivered until we've gone around to
do_notify_resume() again, so it's possible some tracing could observe
the half-delivered state.

There are other cases where we fail signal delivery with regs partly
updated, eg. the write to newsp and SA_SIGINFO, but the latter at least
is very unlikely to fail as it reads back from the frame we just wrote
to.

Looking at other arches they seem to be more careful about leaving regs
unchanged until the copy operations have succeeded, and in general that
seems like good hygenie.

So although the current behaviour is not cleary buggy, it's also not
clearly correct. So move the call to copy_siginfo_to_user() up prior to
the modification of regs->nip, which is closer to the old behaviour, and
easier to reason about.

Fixes: 96d7a4e06f ("powerpc/signal64: Rewrite handle_rt_signal64() to minimise uaccess switches")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210608134605.2783677-1-mpe@ellerman.id.au
2021-06-14 22:14:54 +10:00
Peter Zijlstra
d33b9035e1 objtool: Improve reloc hash size guestimate
Nathan reported that LLVM ThinLTO builds have a performance regression
with commit 25cf0d8aa2 ("objtool: Rewrite hashtable sizing"). Sami
was quick to note that this is due to their use of -ffunction-sections.

As a result the .text section is small and basing the number of relocs
off of that no longer works. Instead have read_sections() compute the
sum of all SHF_EXECINSTR sections and use that.

Fixes: 25cf0d8aa2 ("objtool: Rewrite hashtable sizing")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Debugged-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lkml.kernel.org/r/YMJpGLuGNsGtA5JJ@hirez.programming.kicks-ass.net
2021-06-14 14:05:36 +02:00
Neil Armstrong
103a5348c2 mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk
It has been reported that usage of memcpy() to/from an iomem mapping is invalid,
and a recent arm64 memcpy update [1] triggers a memory abort when dram-access-quirk
is used on the G12A/G12B platforms.

This adds a local sg_copy_to_buffer which makes usage of io versions of memcpy
when dram-access-quirk is enabled.

[1] 285133040e ("arm64: Import latest memcpy()/memmove() implementation")

Fixes: acdc8e71d9 ("mmc: meson-gx: add dram-access-quirk")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20210609150230.9291-1-narmstrong@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 14:02:33 +02:00
周琰杰 (Zhou Yanjie)
d1c777ee5c mmc: JZ4740: Add support for JZ4775
Add support for the variant on the JZ4775 SoC from Ingenic. Let's also
clarify that the drive clock selection and sample clock selection have been
supported since JZ4775, not X1000. So, support for these two functions has
been added for JZ4775 and JZ4780.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/1623329930-14387-3-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:45 +02:00
周琰杰 (Zhou Yanjie)
3160e02536 dt-bindings: mmc: JZ4740: Add bindings for JZ4775
Add a compatible to the mmc DT bindings for the JZ4775 SoC from Ingenic.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/1623329930-14387-2-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:44 +02:00
Haibo Chen
f62f7bcc82 mmc: sdhci-esdhc-imx: Enable support for system wakeup for SDIO
Enable support for system wakeup, by setting the wakeup capability for the
slot corresponding to the SDIO card. Users need to enable the wakeup
through the sysfs interface.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/1623326486-25275-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:44 +02:00
Wolfram Sang
21adc2e45f mmc: Improve function name when aborting a tuning cmd
'mmc_abort_tuning()' made me think tuning gets completely aborted.
However, it sends only a STOP cmd to cancel the current tuning cmd.
Tuning process may still continue after that. So, rename the function to
'mmc_send_abort_tuning()' to better reflect all this.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210608180620.40059-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:44 +02:00
Andrew Jeffery
a7ab186f60 mmc: sdhci-of-aspeed: Turn down a phase correction warning
The card timing and the bus frequency are not changed atomically with
respect to calls to the set_clock() callback in the driver. The result
is the driver sees a transient state where there's a mismatch between
the two and thus the inputs to the phase correction calculation
formula are garbage.

Switch from dev_warn() to dev_dbg() to avoid noise in the normal case,
though the change does make bad configurations less likely to be
noticed.

Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607013020.85885-1-andrew@aj.id.au
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:44 +02:00
Wolfram Sang
039259156b mmc: debugfs: add description for module parameter
Make it obvious what this is for.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210604104459.7574-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:43 +02:00
Zheyu Ma
45c8ddd06c mmc: via-sdmmc: add a check against NULL pointer dereference
Before referencing 'host->data', the driver needs to check whether it is
null pointer, otherwise it will cause a null pointer reference.

This log reveals it:

[   29.355199] BUG: kernel NULL pointer dereference, address:
0000000000000014
[   29.357323] #PF: supervisor write access in kernel mode
[   29.357706] #PF: error_code(0x0002) - not-present page
[   29.358088] PGD 0 P4D 0
[   29.358280] Oops: 0002 [#1] PREEMPT SMP PTI
[   29.358595] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-
g70e7f0549188-dirty #102
[   29.359164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[   29.359978] RIP: 0010:via_sdc_isr+0x21f/0x410
[   29.360314] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00
10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43
18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77
[   29.361661] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046
[   29.362042] RAX: 0000000000000000 RBX: ffff888107d77880
RCX: 0000000000000000
[   29.362564] RDX: 0000000000000000 RSI: ffffffff835d20bb
RDI: 00000000ffffffff
[   29.363085] RBP: ffffc90000118ed8 R08: 0000000000000001
R09: 0000000000000001
[   29.363604] R10: 0000000000000000 R11: 0000000000000001
R12: 0000000000008600
[   29.364128] R13: ffff888107d779c8 R14: ffffc90009c00200
R15: 0000000000008000
[   29.364651] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000)
knlGS:0000000000000000
[   29.365235] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.365655] CR2: 0000000000000014 CR3: 0000000005a2e000
CR4: 00000000000006e0
[   29.366170] DR0: 0000000000000000 DR1: 0000000000000000
DR2: 0000000000000000
[   29.366683] DR3: 0000000000000000 DR6: 00000000fffe0ff0
DR7: 0000000000000400
[   29.367197] Call Trace:
[   29.367381]  <IRQ>
[   29.367537]  __handle_irq_event_percpu+0x53/0x3e0
[   29.367916]  handle_irq_event_percpu+0x35/0x90
[   29.368247]  handle_irq_event+0x39/0x60
[   29.368632]  handle_fasteoi_irq+0xc2/0x1d0
[   29.368950]  __common_interrupt+0x7f/0x150
[   29.369254]  common_interrupt+0xb4/0xd0
[   29.369547]  </IRQ>
[   29.369708]  asm_common_interrupt+0x1e/0x40
[   29.370016] RIP: 0010:native_safe_halt+0x17/0x20
[   29.370360] Code: 07 0f 00 2d db 80 43 00 f4 5d c3 0f 1f 84 00 00 00
00 00 8b 05 c2 37 e5 01 55 48 89 e5 85 c0 7e 07 0f 00 2d bb 80 43 00 fb
f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d f9 91
[   29.371696] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[   29.372079] RAX: 0000000000000000 RBX: 0000000000000002
RCX: 0000000000000000
[   29.372595] RDX: 0000000000000000 RSI: ffffffff854f67a4
RDI: ffffffff85403406
[   29.373122] RBP: ffffc9000008fe90 R08: 0000000000000001
R09: 0000000000000001
[   29.373646] R10: 0000000000000000 R11: 0000000000000001
R12: ffffffff86009188
[   29.374160] R13: 0000000000000000 R14: 0000000000000000
R15: ffff888100258000
[   29.374690]  default_idle+0x9/0x10
[   29.374944]  arch_cpu_idle+0xa/0x10
[   29.375198]  default_idle_call+0x6e/0x250
[   29.375491]  do_idle+0x1f0/0x2d0
[   29.375740]  cpu_startup_entry+0x18/0x20
[   29.376034]  start_secondary+0x11f/0x160
[   29.376328]  secondary_startup_64_no_verify+0xb0/0xbb
[   29.376705] Modules linked in:
[   29.376939] Dumping ftrace buffer:
[   29.377187]    (ftrace buffer empty)
[   29.377460] CR2: 0000000000000014
[   29.377712] ---[ end trace 51a473dffb618c47 ]---
[   29.378056] RIP: 0010:via_sdc_isr+0x21f/0x410
[   29.378380] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00
10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43
18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77
[   29.379714] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046
[   29.380098] RAX: 0000000000000000 RBX: ffff888107d77880
RCX: 0000000000000000
[   29.380614] RDX: 0000000000000000 RSI: ffffffff835d20bb
RDI: 00000000ffffffff
[   29.381134] RBP: ffffc90000118ed8 R08: 0000000000000001
R09: 0000000000000001
[   29.381653] R10: 0000000000000000 R11: 0000000000000001
R12: 0000000000008600
[   29.382176] R13: ffff888107d779c8 R14: ffffc90009c00200
R15: 0000000000008000
[   29.382697] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000)
knlGS:0000000000000000
[   29.383277] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.383697] CR2: 0000000000000014 CR3: 0000000005a2e000
CR4: 00000000000006e0
[   29.384223] DR0: 0000000000000000 DR1: 0000000000000000
DR2: 0000000000000000
[   29.384736] DR3: 0000000000000000 DR6: 00000000fffe0ff0
DR7: 0000000000000400
[   29.385260] Kernel panic - not syncing: Fatal exception in interrupt
[   29.385882] Dumping ftrace buffer:
[   29.386135]    (ftrace buffer empty)
[   29.386401] Kernel Offset: disabled
[   29.386656] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1622727200-15808-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:43 +02:00
Krzysztof Kozlowski
9614708200 mmc: sdhci-sprd: use sdhci_sprd_writew
The sdhci_sprd_writew() was defined by never used in sdhci_ops:

    drivers/mmc/host/sdhci-sprd.c:134:20: warning: unused function 'sdhci_sprd_writew'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210601095403.236007-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:43 +02:00
Krzysztof Kozlowski
15dd8dc9ff mmc: sdhci-esdhc-imx: remove unused is_imx6q_usdhc
The is_imx6q_usdhc() function is unused:

  drivers/mmc/host/sdhci-esdhc-imx.c:343:19: warning: unused function 'is_imx6q_usdhc'

Reported-by: kernel test robot <lkp@intel.com>
Fixes: f47c4bbfa2 ("mmc: sdhci-esdhc-imx: create struct esdhc_soc_data")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20210601095403.236007-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:43 +02:00
Christian Löhle
09247e110b mmc: core: Allow UHS-I voltage switch for SDSC cards if supported
While initializing an UHS-I SD card, the mmc core first tries to switch to
1.8V I/O voltage, before it continues to change the settings for the bus
speed mode.

However, the current behaviour in the mmc core is inconsistent and doesn't
conform to the SD spec. More precisely, an SD card that supports UHS-I must
set both the SD_OCR_CCS bit and the SD_OCR_S18R bit in the OCR register
response. When switching to 1.8V I/O the mmc core correctly checks both of
the bits, but only the SD_OCR_S18R bit when changing the settings for bus
speed mode.

Rather than actually fixing the code to confirm to the SD spec, let's
deliberately deviate from it by requiring only the SD_OCR_S18R bit for both
parts. This enables us to support UHS-I for SDSC cards (outside spec),
which is actually being supported by some existing SDSC cards. Moreover,
this fixes the inconsistent behaviour.

Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Link: https://lore.kernel.org/r/CWXP265MB26803AE79E0AD5ED083BF2A6C4529@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
[Ulf: Rewrote commit message and comments to clarify the changes]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:43 +02:00
Andy Shevchenko
706998e701 mmc: mmc_spi: Imply container_of() to be no-op
Since we don't use structure field layout randomization
the manual shuffling can affect some macros, in particular
container_of() against struct of_mmc_spi, which becomes
a no-op when pdata member is the first one in the structure.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210528112127.71738-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:42 +02:00
Andy Shevchenko
91445d5eed mmc: mmc_spi: Drop duplicate 'mmc_spi' in the debug messages
dev_dbg() in any case prints the device and driver name, no need
to repeat this in (some) messages. Drop duplicates for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210528112127.71738-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:42 +02:00
Geert Uytterhoeven
de905475bd mmc: dw_mmc-pltfm: Remove unused <linux/clk.h>
As of commit 4cdc2ec1da ("mmc: dw_mmc: move rockchip related code
to a separate file"), dw_mmc-pltfm.c no longer uses the clock API.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/20210527194226.1705607-1-geert@linux-m68k.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:42 +02:00
Steven Lee
dd646d982c mmc: sdhci-of-aspeed: Configure the SDHCIs as specified by the devicetree.
The hardware provides capability configuration registers for each SDHCI
in the global configuration space for the SD controller. Writes to the
global capability registers are mirrored to the capability registers in
the associated SDHCI. Configuration of the capabilities must be written
through the mirror registers prior to initialisation of the SDHCI.

Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210524073308.9328-5-steven_lee@aspeedtech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:42 +02:00
Aviral Gupta
7c45b2268e mmc: core: Add a missing SPDX license header
Add the missing license header to drivers/mmc/core/block.c

Signed-off-by: Aviral Gupta <shiv14112001@gmail.com>
Link: https://lore.kernel.org/r/20210523155914.5200-1-shiv14112001@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:41 +02:00
Johan Hovold
3c0bb31077 mmc: vub3000: fix control-request direction
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Fix the SET_ROM_WAIT_STATES request which erroneously used
usb_rcvctrlpipe().

Fixes: 88095e7b47 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org      # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133026.17296-1-johan@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:41 +02:00
Tian Tao
809ae4e1ca mmc: sdhci-omap: Use pm_runtime_resume_and_get() to replace open coding
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1621558965-34077-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:41 +02:00
Tian Tao
07e70346e2 mmc: sdhci_am654: Use pm_runtime_resume_and_get() to replace open coding
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1621558775-31185-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:41 +02:00
Tian Tao
05335af1e8 mmc: core: Use pm_runtime_resume_and_get() to replace open coding
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1621513304-27824-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:41 +02:00
Yue Hu
83c4930256 mmc: cqhci: introduce get_trans_desc_offset()
The same calculation to get transfer descriptor offset is already used
at 3 different locations. Let's create a new helper to simplify code.

Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20210521034432.2321-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:40 +02:00
Yue Hu
47d23c95fe mmc: cqhci: fix typo
'descritors' -> 'descriptors'

Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20210520101330.2255-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:40 +02:00
Rob Herring
1e9daaf616 dt-bindings: mmc: Clean-up examples to match documented bindings
The "sdhci" compatible is not documented though used as a fallback in a
few cases. It is also not supported by a Linux driver. Just remove the
example as part of ridding examples of undocumented bindings.

The "brcm,bcm43xx-fmac" compatible is also not documented. Update the
example to use one of the correct ones, "brcm,bcm4329-fmac", instead and
use a device class based nodename.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210519153712.3146025-1-robh@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:40 +02:00
Yue Hu
f0ed43edb4 mmc: mediatek: remove useless data parameter from msdc_data_xfer_next()
We do not use the 'data' in msdc_data_xfer_next().

Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20210517105432.1682-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:40 +02:00
Yue Hu
151071351b mmc: mediatek: use data instead of mrq parameter from msdc_{un}prepare_data()
We already have 'mrq->data' before calling these two functions, no
need to find it again via 'mrq->data' internally. Also remove local
data variable accordingly.

Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20210517100900.1620-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:39 +02:00
Andreas Färber
8931acce6b dt-bindings: mmc: rockchip-dw-mshc: Add Rockchip RK1808
Add a compatible string for Rockchip RK1808 SoC.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210516230551.12469-7-afaerber@suse.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:39 +02:00
Tong Zhang
42933c8aa1 memstick: rtsx_usb_ms: fix UAF
This patch fixes the following issues:
1. memstick_free_host() will free the host, so the use of ms_dev(host) after
it will be a problem. To fix this, move memstick_free_host() after when we
are done with ms_dev(host).
2. In rtsx_usb_ms_drv_remove(), pm need to be disabled before we remove
and free host otherwise memstick_check will be called and UAF will
happen.

[   11.351173] BUG: KASAN: use-after-free in rtsx_usb_ms_drv_remove+0x94/0x140 [rtsx_usb_ms]
[   11.357077]  rtsx_usb_ms_drv_remove+0x94/0x140 [rtsx_usb_ms]
[   11.357376]  platform_remove+0x2a/0x50
[   11.367531] Freed by task 298:
[   11.368537]  kfree+0xa4/0x2a0
[   11.368711]  device_release+0x51/0xe0
[   11.368905]  kobject_put+0xa2/0x120
[   11.369090]  rtsx_usb_ms_drv_remove+0x8c/0x140 [rtsx_usb_ms]
[   11.369386]  platform_remove+0x2a/0x50

[   12.038408] BUG: KASAN: use-after-free in __mutex_lock.isra.0+0x3ec/0x7c0
[   12.045432]  mutex_lock+0xc9/0xd0
[   12.046080]  memstick_check+0x6a/0x578 [memstick]
[   12.046509]  process_one_work+0x46d/0x750
[   12.052107] Freed by task 297:
[   12.053115]  kfree+0xa4/0x2a0
[   12.053272]  device_release+0x51/0xe0
[   12.053463]  kobject_put+0xa2/0x120
[   12.053647]  rtsx_usb_ms_drv_remove+0xc4/0x140 [rtsx_usb_ms]
[   12.053939]  platform_remove+0x2a/0x50

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Co-developed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210511163944.1233295-1-ztong0001@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:39 +02:00
Lucas Stach
f722e650d9 mmc: core: add support for disabling HS400 mode via DT
On some boards the data strobe line isn't wired up, rendering HS400
support broken, even if both the controller and the eMMC claim to
support it. Allow to disable HS400 mode via DT.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Link: https://lore.kernel.org/r/20210510190400.105162-3-l.stach@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:39 +02:00
Lucas Stach
2991ad76d2 mmc: sdhci-esdhc-imx: advertise HS400 mode through MMC caps
Instead of having an indirection through the SDHCI layer and emulating
a capability bit, that isn't there in hardware, do the same same thing
as with HS400_ES and advertise the support for HS400 directly through
the MMC caps.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20210510190400.105162-2-l.stach@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:39 +02:00
Lucas Stach
4d895de350 dt-bindings: mmc: add no-mmc-hs400 flag
HS400 requires a data strobe line in addition to the usual MMC signal
lines. If a board design neglects to wire up this signal, HS400 mode is
not available, even if both the controller and the eMMC are claiming to
support this mode. Add a DT flag to allow boards to disable the HS400
support in this case.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210510190400.105162-1-l.stach@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:38 +02:00
Ulf Hansson
130206a615 mmc: core: Add support for cache ctrl for SD cards
In SD spec v6.x the SD function extension registers for performance
enhancements were introduced. As a part of this an optional internal cache
on the SD card, can be used to improve performance.

The let the SD card use the cache, the host needs to enable it and manage
flushing of the cache, so let's add support for this.

Note that for an SD card supporting the cache it's mandatory for it, to
also support the poweroff notification feature. According to the SD spec,
if the cache has been enabled and a poweroff notification is sent to the
card, that implicitly also means that the card should flush its internal
cache. Therefore, dealing with cache flushing for REQ_OP_FLUSH block
requests is sufficient.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20210511101359.83521-1-ulf.hansson@linaro.org
2021-06-14 13:57:38 +02:00
Ben Chuang
34dd3cccca mmc: sdhci-pci-gli: Fine tune GL9763E L1 entry delay
Fine tune the value to 21us in order to improve read/write performance.

Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Link: https://lore.kernel.org/r/20210511061835.5559-1-benchuanggli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:38 +02:00
Geert Uytterhoeven
110a8688c6 dt-bindings: mmc: renesas,mmcif: Convert to json-schema
Convert the Renesas Multi Media Card Interface (MMCIF) Device Tree
binding documentation to json-schema.

Document missing properties.
Update the example to match reality.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/04b97315fed0f4f512356b68f9f5bb6ed7adc41f.1620648698.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:38 +02:00
Zhen Lei
d03be8c1c7 mmc: jz4740: Remove redundant error printing in jz4740_mmc_probe()
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.

Therefore, remove the error printing here to simplify code and reduce the
binary size.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210511093329.4670-1-thunder.leizhen@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:38 +02:00