Commit graph

271,723 commits

Author SHA1 Message Date
Mark Rustad
d490d15877 ixgbe: Check whether FDIRCMD writes actually complete
Wait up to about 100 us for FDIRCMD writes to complete and return
failure indications.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01 16:44:59 -07:00
Don Skidmore
b5529ef5be ixgbe: Assign set_phy_power dynamically where needed
There are various reasons why this method may or may not need to be
defined and some of these we don't know until runtime.  So we will
set the value in get_invariants.

Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01 16:42:39 -07:00
Don Skidmore
bd8069ace5 ixgbe: add new function to check for management presence
This patch adds a support function that will indicate for the
existence of management FW.

Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01 16:40:19 -07:00
Anjali Singhai Jain
92faef8561 i40e: Set defport behavior for the Main VSI when in promiscuous mode
This fixes bugs where the port is not receiving multicast or VLAN tagged
packets when in promiscuous mode. This can occur when a SW bridge is
created on top of the device.

This also fixes issues where the promiscuous behavior setting was not
being preserved across a reset caused by features being enabled or
disabled.

We are using defport instead of doing a true promiscuous mode because we do
not need to receive the SRIOV or VMDq VSI directed traffic which would suck
up bandwidth and is really not intended for the SW bridge.

In addition, with defport we get VLAN promiscuous behavior which is not
possible from the VSI level promiscuous setting.

Change-ID: Ie21985eac32d5af1c02e9d71c6430a90d5bab40f
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01 16:33:00 -07:00
David Ward
e704059272 net: qmi_wwan: Sierra Wireless MC73xx -> Sierra Wireless MC7304/MC7354
Other Sierra Wireless MC73xx devices exist, with different USB IDs.

Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 15:16:17 -07:00
Andrew Lunn
bc0f4a87fc net: phy: fixed_phy: Set phy capabilities even when link down.
What features a phy supports is masked in genphy_config_init() by
looking at the PHYs BMSR register.

If the link is down, fixed_phy_update_regs() will only set the auto-
negotiation capable bit in BMSR. Thus genphy_config_init() comes to
the conclusion the PHY can only perform 10/Half, and masks out the
higher speed features. If however the link it up, BMSR is set to
indicate the speed the PHY is capable of auto-negotiating, and
genphy_config_init() does not mask out the high speed features.

To fix this, when the link is down, have fixed_phy_update_regs() leave
the link status, auto-negotiation complete, and link partner
capabilities unset, but set all the local capabilities depending on
the fixed phy speed.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 14:48:03 -07:00
Andrew Lunn
a5597008db phy: fixed_phy: Add gpio to determine link up/down.
An SFP module may have a link up/down status pin which can be
connection to a GPIO line of the host. Add support for reading such an
GPIO in the fixed_phy driver.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 14:48:02 -07:00
Andrew Lunn
8b59d19e74 dsa: mv88e6xxx: Don't poll forced interfaces for state changes
When polling for link status, don't consider ports which have a forced
link. Such ports don't monitor their phy or may not even have a phy.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 14:48:02 -07:00
Andrew Lunn
e7e72ac05a dsa: mv88e6xxx: Set the RGMII delay based on phy interface
Some Marvell switches allow the RGMII Rx and Tx clock to be delayed
when the port is using RGMII. Have the adjust_link function look at
the phy interface type and enable this delay as requested.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 14:48:02 -07:00
Andrew Lunn
34b31da486 phy: fixed_phy: Set supported speed in phydev
Set the supported field of the phydev to indicate the speed features
of the phy. If the phy is never attached to a netdev, but used in an
adjust_link() function, the speed will be incorrectly evaluated to
10/half rather than the correct speed/duplex.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 14:48:02 -07:00
Andrew Lunn
dea870242a dsa: mv88e6xxx: Allow speed/duplex of port to be configured
The current code sets user ports to perform auto negotiation using the
phy. CPU and DSA ports are configured to full duplex and maximum speed
the switch supports.

There are however use cases where the CPU has a slower port, and when
user ports have SFP modules with fixed speed. In these cases, port
settings to be read from a fixed_phy devices. The switch driver then
needs to implement the adjust_link op, so the port settings can be
set.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 14:48:01 -07:00
Florian Fainelli
5a11dd7d96 net: phy: Allow PHY devices to identify themselves as Ethernet switches, etc.
Some Ethernet MAC drivers using the PHY library require the hardcoding
of link parameters when interfaced to a switch device, SFP module,
switch to switch port, etc. This has typically lead to various ad-hoc
implementations looking like this:

- using a "fixed PHY" emulated device, which will provide link
  indication towards the Ethernet MAC driver and hardware

- pretend there is no PHY and hardcode link parameters, ala mv643x_eth

Based on that, it is desireable to have the PHY drivers advertise the
correct link parameters, just like regular Ethernet PHYs towards their
CPU Ethernet MAC drivers, however, Ethernet MAC drivers should be able
to tell whether this link should be monitored or not. In the context
of an Ethernet switch, SFP module, switch to switch link, we do not
need to monitor this link since it should be always up.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 14:48:01 -07:00
Pravin B Shelar
4c22279848 ip-tunnel: Use API to access tunnel metadata options.
Currently tun-info options pointer is used in few cases to
pass options around. But tunnel options can be accessed using
ip_tunnel_info_opts() API without using the pointer. Following
patch removes the redundant pointer and consistently make use
of API.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 12:28:56 -07:00
Sunil Goutham
d77a238498 net: thunderx: Support for internal loopback mode
Support for setting VF's corresponding BGX LMAC in internal
loopback mode. This mode can be used for verifying basic HW
functionality such as packet I/O, RX checksum validation,
CQ/RBDR interrupts, stats e.t.c. Useful when DUT has no external
network connectivity.

'loopback' mode can be enabled or disabled via ethtool.

Note: This feature is not supported when no of VFs enabled are
morethan no of physical interfaces i.e active BGX LMACs

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30 21:54:12 -07:00
Sunil Goutham
92dc87697e net: thunderx: Support for upto 96 queues for a VF
This patch adds support for handling multiple qsets assigned to a
single VF. There by increasing no of queues from earlier 8 to max
no of CPUs in the system i.e 48 queues on a single node and 96 on
dual node system. User doesn't have option to assign which Qsets/VFs
 to be merged. Upon request from VF, PF assigns next free Qsets as
secondary qsets. To maintain current behavior no of queues is kept
to 8 by default which can be increased via ethtool.

If user wants to unbind NICVF driver from a secondary Qset then it
should be done after tearing down primary VF's interface.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30 21:54:12 -07:00
Sunil Goutham
39ad6eea6c net: thunderx: Rework interrupt handling
Rework interrupt handler to avoid checking IRQ affinity of
CQ interrupts. Now separate handlers are registered for each IRQ
including RBDR. Register interrupt handlers for only those
which are being used. Add nicvf_dump_intr_status() and use it
in irq handlers.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30 21:54:12 -07:00
Sunil Goutham
aa2e259b47 net: thunderx: Support for HW VLAN stripping
This patch configures HW to strip 802.1Q header if found in a
receiving packet. The stripped VLAN ID and TCI information is
passed on to software via CQE_RX. Also sets netdev's 'vlan_features'
so that other HW offload features can be used for tagged packets.

This offload feature can be enabled or disabled via ethtool.

Network stack normally ignores RPS for 802.1Q packets and hence low
throughput. With this offload enabled throughput for tagged packets
will be almost same as normal packets.

Note: This patch doesn't enable HW VLAN insertion for transmit packets.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30 21:54:12 -07:00
Sunil Goutham
38bb5d4f4f net: thunderx: Receive hashing HW offload support
Adding support for receive hashing HW offload by using RSS_ALG
and RSS_TAG fields of CQE_RX descriptor. Also removed dependency
on minimum receive queue count to configure RSS so that hash is
always generated.

This hash is used by RPS logic to distribute flows across multiple
CPUs. Offload can be disabled via ethtool.

Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30 21:54:12 -07:00
Sunil Goutham
6051cba77c net: thunderx: mailboxes: remove code duplication
Use the nicvf_send_msg_to_pf() function in the mailbox code.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30 21:54:11 -07:00
Sunil Goutham
a2dc5dedbb net: thunderx: Add receive error stats reporting via ethtool
Added ethtool support to dump receive packet error statistics reported
in CQE. Also made some small fixes

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30 21:54:11 -07:00
David S. Miller
06fb4e701b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-08-30 21:45:01 -07:00
Jesse Gross
8e816df879 geneve: Use GRO cells infrastructure.
Geneve can benefit from GRO at the device level in a manner similar
to other tunnels, especially as hardware offloads are still emerging.

After this patch, aggregated frames are seen on the tunnel interface.
Single stream throughput nearly doubles in ideal circumstances (on
old hardware).

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29 13:44:29 -07:00
David S. Miller
f5004a14fa Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:

====================
pull request: bluetooth-next 2015-08-28

One more bunch of Bluetooth patches for 4.3:

 - Crash fix for hci_bcm driver
 - Enhancements to hci_intel driver (e.g. baudrate configuration)
 - Fix for SCO link type after multiple connect attempts
 - Cleanups & minor fixes in a few other places

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29 13:15:03 -07:00
Tony Lindgren
f892a84cc8 net/smsc911x: Fix deferred probe for interrupt
The interrupt handler may not be available when smsc911x probes if the
interrupt handler is a GPIO controller for example. Let's fix that
by adding handling for -EPROBE_DEFER.

Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29 13:09:17 -07:00
Jiri Benc
a43a9ef6a2 vxlan: do not receive IPv4 packets on IPv6 socket
By default (subject to the sysctl settings), IPv6 sockets listen also for
IPv4 traffic. Vxlan is not prepared for that and expects IPv6 header in
packets received through an IPv6 socket.

In addition, it's currently not possible to have both IPv4 and IPv6 vxlan
tunnel on the same port (unless bindv6only sysctl is enabled), as it's not
possible to create and bind both IPv4 and IPv6 vxlan interfaces and there's
no way to specify both IPv4 and IPv6 remote/group IP addresses.

Set IPV6_V6ONLY on vxlan sockets to fix both of these issues. This is not
done globally in udp_tunnel, as l2tp and tipc seems to work okay when
receiving IPv4 packets on IPv6 socket and people may rely on this behavior.
The other tunnels (geneve and fou) do not support IPv6.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29 13:07:54 -07:00
Jiri Benc
7f9562a1f4 ip_tunnels: record IP version in tunnel info
There's currently nothing preventing directing packets with IPv6
encapsulation data to IPv4 tunnels (and vice versa). If this happens,
IPv6 addresses are incorrectly interpreted as IPv4 ones.

Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this
in ip_tunnel_info. Reject packets at appropriate places if they are supposed
to be encapsulated into an incompatible protocol.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29 13:07:54 -07:00
Jiri Benc
46fa062ad6 ip_tunnels: convert the mode field of ip_tunnel_info to flags
The mode field holds a single bit of information only (whether the
ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags.
This allows more mode flags to be added.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29 13:07:54 -07:00
Nikolay Aleksandrov
b0d4943eec bonding: fix bond_poll_controller bh_enable warning
The problem is rcu_read_unlock_bh() which triggers a warning when irqs are
disabled. ndo_poll_controller should run with irqs disabled always so we
can drop the rcu_read_lock_bh.

[   98.502922] bond0: making interface eth1 the new active one
[   98.503039] ------------[ cut here ]------------
[   98.503039] WARNING: CPU: 0 PID: 1744 at kernel/softirq.c:150 __local_bh_enable_ip+0x96/0xc0()
[   98.503039] Modules linked in: bonding(OE) rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache netconsole ppdev joydev parport_pc serio_raw parport i2c_piix4 video acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc virtio_net e1000 ata_generic pcnet32 mii virtio_pci virtio_ring virtio pata_acpi
[   98.503039] CPU: 0 PID: 1744 Comm: ifenslave Tainted: G           OE   4.2.0-rc7+ #56
[   98.503039] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   98.503039]  0000000000000000 00000000e96ba230 ffff880020c236b8 ffffffff8183f105
[   98.503039]  0000000000000000 0000000000000000 ffff880020c236f8 ffffffff810a9496
[   98.503039]  ffff88002ea99e08 0000000000000200 ffffffffa02a8e06 ffff88002ea99e08
[   98.503039] Call Trace:
[   98.503039]  [<ffffffff8183f105>] dump_stack+0x4c/0x65
[   98.503039]  [<ffffffff810a9496>] warn_slowpath_common+0x86/0xc0
[   98.503039]  [<ffffffffa02a8e06>] ? bond_poll_controller+0x146/0x250 [bonding]
[   98.503039]  [<ffffffff810a95ca>] warn_slowpath_null+0x1a/0x20
[   98.503039]  [<ffffffff810ae376>] __local_bh_enable_ip+0x96/0xc0
[   98.503039]  [<ffffffffa02a8e2f>] bond_poll_controller+0x16f/0x250 [bonding]
[   98.503039]  [<ffffffffa02a8cf3>] ? bond_poll_controller+0x33/0x250 [bonding]
[   98.503039]  [<ffffffff810feaed>] ? trace_hardirqs_off+0xd/0x10
[   98.503039]  [<ffffffff81848afb>] ? _raw_spin_unlock_irqrestore+0x5b/0x60
[   98.503039]  [<ffffffff816ec48e>] netpoll_poll_dev+0x6e/0x350
[   98.503039]  [<ffffffff816eb977>] ? netpoll_start_xmit+0x137/0x1d0
[   98.503039]  [<ffffffff816b2e8b>] ? __alloc_skb+0x5b/0x210
[   98.503039]  [<ffffffff816ec89d>] netpoll_send_skb_on_dev+0x12d/0x2a0
[   98.503039]  [<ffffffff816eccde>] netpoll_send_udp+0x2ce/0x430
[   98.503039]  [<ffffffffa0190850>] write_msg+0xb0/0xf0 [netconsole]
[   98.503039]  [<ffffffff81116b63>] call_console_drivers.constprop.25+0x133/0x260
[   98.503039]  [<ffffffff81117934>] console_unlock+0x2f4/0x580
[   98.503039]  [<ffffffff81117ea5>] ? vprintk_emit+0x2e5/0x630
[   98.503039]  [<ffffffff81117ee5>] vprintk_emit+0x325/0x630
[   98.503039]  [<ffffffff81118379>] vprintk_default+0x29/0x40
[   98.503039]  [<ffffffff8183de4f>] printk+0x55/0x6b
[   98.503039]  [<ffffffff816c754c>] __netdev_printk+0x16c/0x260
[   98.503039]  [<ffffffff816c7a12>] netdev_info+0x62/0x80
[   98.503039]  [<ffffffffa02ab464>] bond_change_active_slave+0x134/0x6a0 [bonding]
[   98.503039]  [<ffffffffa02aba95>] bond_select_active_slave+0xc5/0x310 [bonding]
[   98.503039]  [<ffffffffa02aeb78>] bond_enslave+0x1088/0x10c0 [bonding]
[   98.503039]  [<ffffffffa02af46b>] bond_do_ioctl+0x37b/0x400 [bonding]
[   98.503039]  [<ffffffff81101d8d>] ? trace_hardirqs_on+0xd/0x10
[   98.503039]  [<ffffffff816dc437>] ? rtnl_lock+0x17/0x20
[   98.503039]  [<ffffffff816e5fd1>] dev_ifsioc+0x331/0x3e0
[   98.503039]  [<ffffffff816e62dc>] dev_ioctl+0xec/0x6c0
[   98.503039]  [<ffffffff816a6c6a>] sock_do_ioctl+0x4a/0x60
[   98.503039]  [<ffffffff816a7300>] sock_ioctl+0x1c0/0x250
[   98.503039]  [<ffffffff81271bfe>] do_vfs_ioctl+0x2ee/0x540
[   98.503039]  [<ffffffff810fd943>] ? up_read+0x23/0x40
[   98.503039]  [<ffffffff81070993>] ? __do_page_fault+0x1d3/0x420
[   98.503039]  [<ffffffff8127e246>] ? __fget_light+0x66/0x90
[   98.503039]  [<ffffffff81271ec9>] SyS_ioctl+0x79/0x90
[   98.503039]  [<ffffffff8184936e>] entry_SYSCALL_64_fastpath+0x12/0x76
[   98.503039] ---[ end trace 00cfa804b0670051 ]---

Fixes: 616f45416c ("bonding: implement bond_poll_controller()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 22:25:43 -07:00
Sergei Shtylyov
7a468ac624 sh_eth: propagate platform_get_irq() error upstream
The driver overrides the error returned by platform_get_irq() with -ENODEV
which e.g. precludes the deferred  probing from working. Propagate the real
error code to the driver core instead.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 22:25:43 -07:00
Sergei Shtylyov
f375339e49 ravb: propagate platform_get_irq() error upstream
The driver overrides the error returned by platform_get_irq() with -ENODEV
which e.g. precludes the deferred  probing from working. Propagate the real
error code to the driver core instead.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 22:25:42 -07:00
Sergei Shtylyov
ef899c0778 phylib: simplify NULL checks
Fix scripts/checkpatch.pl's messages like:

CHECK: Comparison to NULL could be written "!phydrv->read_mmd_indirect"

BTW, it doesn't detect the reversed comparisons (which I've fixed as well).

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 14:15:25 -07:00
Sergei Shtylyov
d3765f08d6 phylib: simplify bogus phy_device_create() result
Get rid of the bogus string of type casts where ERR_PTR() is enough.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 14:15:24 -07:00
Shradha Shah
b0fbdae127 sfc: Allow driver to cope with a lower number of VIs than it needs for RSS
Previously, the driver would refuse to load if it couldn't secure
enough VIs from the MC to fulfill its RSS requirements.
This was causing probe to fail on later functions in
configurations where we'd run out of VIs, such as having many
VFs.

This change allows the driver to load with fewer VIs, down to a
minimum of 2. A warning will be printed saying that RSS
requirements were not met, possibly affecting performance.

efx->max_tx_channels needs to be set to avoid going down the
failure path in efx_probe_nic() immediately in the loop after the
probe() NIC-type function.
Also, Set rc=ENOSPC when bombing out of efx_probe_nic due to lack
of VIs.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:53:47 -07:00
Hariprasad Shenai
a69265e9f6 cxgb4: Force uninitialized state if FW in adapter is unsupported
Forcing uninitialized state allows us to upgrade and reinitialize
the adapter.

    FW_VERSION_T4 = 1.4.0.0
    FW_VERSION_T5 = 0.0.0.0
    FW_VERSION_T6 = 0.0.0.0
At this point driver supports above and greater than above version.

If FW in adapter < min FW_VERSION driver supports tries to upgrade the FW
If FW in adapter >= FW_VERSION driver supports then it follows normal path

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:49:07 -07:00
David Ahern
8f58336d3f net: Add ethernet header for pass through VRF device
The change to use a custom dst broke tcpdump captures on the VRF device:

$ tcpdump -n -i vrf10
...
05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64
05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84:
	0x0000:  0102 0a02 01fe 0000 9181 55e5 0001 bd11  ..........U.....
	0x0010:  da55 0000 0000 bb5d 0700 0000 0000 1011  .U.....]........
	0x0020:  1213 1415 1617 1819 1a1b 1c1d 1e1f 2021  ...............!
	0x0030:  2223 2425 2627 2829 2a2b 2c2d 2e2f 3031  "#$%&'()*+,-./01
	0x0040:  3233 3435 3637                           234567

Local packets going through the VRF device are missing an ethernet header.
Fix by adding one and then stripping it off before pushing back to the IP
stack. With this patch you get the expected dumps:

...
05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64
05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64
...

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:30:08 -07:00
Chas Williams
274b045509 net/xen-netfront: only napi_synchronize() if running
If an interface isn't running napi_synchronize() will hang forever.

[  392.248403] rmmod           R  running task        0   359    343 0x00000000
[  392.257671]  ffff88003760fc88 ffff880037193b40 ffff880037193160 ffff88003760fc88
[  392.267644]  ffff880037610000 ffff88003760fcd8 0000000100014c22 ffffffff81f75c40
[  392.277524]  0000000000bc7010 ffff88003760fca8 ffffffff81796927 ffffffff81f75c40
[  392.287323] Call Trace:
[  392.291599]  [<ffffffff81796927>] schedule+0x37/0x90
[  392.298553]  [<ffffffff8179985b>] schedule_timeout+0x14b/0x280
[  392.306421]  [<ffffffff810f91b9>] ? irq_free_descs+0x69/0x80
[  392.314006]  [<ffffffff811084d0>] ? internal_add_timer+0xb0/0xb0
[  392.322125]  [<ffffffff81109d07>] msleep+0x37/0x50
[  392.329037]  [<ffffffffa00ec79a>] xennet_disconnect_backend.isra.24+0xda/0x390 [xen_netfront]
[  392.339658]  [<ffffffffa00ecadc>] xennet_remove+0x2c/0x80 [xen_netfront]
[  392.348516]  [<ffffffff81481c69>] xenbus_dev_remove+0x59/0xc0
[  392.356257]  [<ffffffff814e7217>] __device_release_driver+0x87/0x120
[  392.364645]  [<ffffffff814e7cf8>] driver_detach+0xb8/0xc0
[  392.371989]  [<ffffffff814e6e69>] bus_remove_driver+0x59/0xe0
[  392.379883]  [<ffffffff814e84f0>] driver_unregister+0x30/0x70
[  392.387495]  [<ffffffff814814b2>] xenbus_unregister_driver+0x12/0x20
[  392.395908]  [<ffffffffa00ed89b>] netif_exit+0x10/0x775 [xen_netfront]
[  392.404877]  [<ffffffff81124e08>] SyS_delete_module+0x1d8/0x230
[  392.412804]  [<ffffffff8179a8ee>] system_call_fastpath+0x12/0x71

Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:29:19 -07:00
Corinna Vinschen
d7d2d89d4b r8169: Add software counter for multicast packages
The multicast hardware counter on 8168/8111 chips is only 32 bit while the
statistics in struct rtnl_link_stats64 are 64 bit.  Given that statistics
are requested on an irregular basis, an overflow of the hardware counter
can go unnoticed.  To count even very large numbers of multicast packets
reliably, add a software counter and remove previously applied code to
fill the multicast field requested by @rtl8169_get_stats64 with the values
read from the rx_multicast hardware counter.

Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 13:22:50 -07:00
Frederic Danis
917522aae1 Bluetooth: hci_bcm: Fix crash on suspend
If bcm_suspend is called whithout device opened there is a crash as
it tries to use bdev->hu which is NULL.
Rename bcm_device_list_lock to bcm_device_lock as it does not only apply
to bcm_device_list.

Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28 21:09:14 +02:00
Loic Poulain
1ab1f239bf Bluetooth: hci_intel: Add support for platform driver
A platform device can be used to provide some specific resources in
order to manage the controller. In this first patch we retrieve the
reset gpio which is used to power on/off the controller.

The main issue is to match the current tty with the correct pdev.
In case of ACPI, we can easily find the right tty/pdev pair because
they are both child of the same UART port.

If controller is powered-on from the driver, we need to wait for a
HCI boot event before being able to send any command.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28 21:00:38 +02:00
Marcel Holtmann
0ed97e8294 Bluetooth: btintel: Add MODULE_FIRMWARE entries for iBT 3.0 controllers
The iBT 3.0 controllers need intel/ibt-11-5.sfi and intel/ibt-11-5.ddc
firmware files from linux-firmware repository.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-08-28 21:00:37 +02:00
Minjune Kim
5075edae08 Bluetooth: btusb: Correct typos based on checkpatch.pl
Signed-off-by: Minjune Kim <infinite.minjune.kim@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28 21:00:37 +02:00
Loic Poulain
ff2895592f Bluetooth: hci_intel: Add Intel baudrate configuration support
Implement the set_baudrate callback for hci_intel.
 - Controller requires a read Intel version command before updating
   its baudrate.
 - The operation consists in an async cmd since the controller does
   not respond at the same speed.
 - Wait 100ms to let the controller change its baudrate.
 - Clear RTS until we change our own UART speed

Manage speed change in the setup function, we need to restore the oper
speed once chip has booted on patched firmware.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28 21:00:37 +02:00
Loic Poulain
e54991677e Bluetooth: hci_uart: Fix zero len data packet reception issue
Packets with a variable length value equal to zero were not received.

Since no more data expected (and input buffer entirely consumed), we
need to complete/forward the packet immediately instead of waiting for
more data.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28 21:00:37 +02:00
Shengzhen Li
d4902632ff Bluetooth: btmrvl: change device pointer passed to dev_coredumpv
This change ensures we will get driver name as 'btmrvl_sdio'
in udev event.

Signed-off-by: Shengzhen Li <szli@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28 21:00:36 +02:00
David S. Miller
0d36938bb8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-08-27 21:45:31 -07:00
Linus Torvalds
4941b8f0c2 powerpc fixes for 4.2 #3
- Fix MSI/MSI-X on pseries from Guilherme
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV36wHAAoJEFHr6jzI4aWAGEcP/jbSrPmb2O0n4r7URpEw0mz5
 zrzDJhmu3s+S+nVqrmPt9ZkMKTp93pICR8/h6+2PV2zp81lLAUV/RK8DUK2l+u2w
 u5yE1aTTpcTWiz7OfqVK6AGtcoGQJFMIBuxa5IoPbNW9PBHNyF/+5FcOxFVPUEjy
 uMOu87gK1EiiLj8o2KirfIMVoXftbiPrw4MINAAcp78aAss7pA0Ae2/kMYW59Bvh
 CiwsHSQKExk5SCszIbrFekBxAMMlpBVqgaIZK+92qFpDKbJvGtA4SStGsIine6Ho
 xURDK6z0l34X7lmdDwJmcnH+W/zP/acJjPUf+UhK/cskp0YDooL2sJ1oiiD7CJzO
 HcTxjb+iqWh8k8L5G0KVI67LdyycpHSj2F4o2wD+8FLUYM7qA0W6RtICshVDXtcV
 j28mufbkPIFLzyOhbjGdS97v2TrqRil0NFaJwovI3uUHb1hQ5ztpu/Sa36vI/e1q
 lvBw4bfXbLdiz87X9M0m4//po7WAOfdkdyOswdJmpiYYn45ZOIxzdlHJGkvRHVKV
 oHd429d8fpX49/4NRtBlwEQ3HrH01kIDIFjWNWYVOCncmb3j+hUqFRDIiORIy6TN
 h53AwhG5VDJEx0rqLwpGB2acZbjpiLRiqz6M3nbkyeFP5HStJ9GwVEPtBeyMpyLU
 qhJEJ5SXTcqxe/GOa3K9
 =qDdb
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Fix MSI/MSI-X on pseries from Guilherme"

* tag 'powerpc-4.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/PCI: Disable MSI/MSI-X interrupts at PCI probe time in OF case
  PCI: Make pci_msi_setup_pci_dev() non-static for use by arch code
2015-08-27 17:59:17 -07:00
Linus Torvalds
e001d7084a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Some straggler bug fixes here:

   1) Netlink_sendmsg() doesn't check iterator type properly in mmap
      case, from Ken-ichirou MATSUZAWA.

   2) Don't sleep in atomic context in bcmgenet driver, from Florian
      Fainelli.

   3) The pfkey_broadcast() code patch can't actually ever use anything
      other than GFP_ATOMIC.  And the cases that right now pass
      GFP_KERNEL or similar will currently trigger an RCU splat.  Just
      use GFP_ATOMIC unconditionally.  From David Ahern.

   4) Fix FD bit timings handling in pcan_usb driver, from Marc
      Kleine-Budde.

   5) Cache dst leaked in ip6_gre tunnel removal, fix from Huaibin Wang.

   6) Traversal into drivers/net/ethernet/renesas should be triggered by
      CONFIG_NET_VENDOR_RENESAS, not a particular driver's config
      option.  From Kazuya Mizuguchi.

   7) Fix regression in handling of igmp_join errors in vxlan, from
      Marcelo Ricardo Leitner.

   8) Make phy_{read,write}_mmd_indirect() properly take the mdio_lock
      mutex when programming the registers.  From Russell King.

   9) Fix non-forced handling in u32_destroy(), from WANG Cong.

  10) Test the EVENT_NO_RUNTIME_PM flag before it is cleared in
      usbnet_stop(), from Eugene Shatokhin.

  11) In sfc driver, don't fetch statistics firmware isn't capable of,
      from Bert Kenward.

  12) Verify ASCONF address parameter location in SCTP, from Xin Long"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state
  sctp: asconf's process should verify address parameter is in the beginning
  sfc: only use vadaptor stats if firmware is capable
  net: phy: fixed: propagate fixed link values to struct
  usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared
  drivers: net: xgene: fix: Oops in linkwatch_fire_event
  cls_u32: complete the check for non-forced case in u32_destroy()
  net: fec: use reinit_completion() in mdio accessor functions
  net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect()
  vxlan: re-ignore EADDRINUSE from igmp_join
  net: compile renesas directory if NET_VENDOR_RENESAS is configured
  ip6_gre: release cached dst on tunnel removal
  phylib: Make PHYs children of their MDIO bus, not the bus' parent.
  can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters
  net: Fix RCU splat in af_key
  net: bcmgenet: fix uncleaned dma flags
  net: bcmgenet: Avoid sleeping in bcmgenet_timeout
  netlink: mmap: fix tx type check
2015-08-27 17:52:38 -07:00
Linus Torvalds
5c98bcce64 Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm fixlet from Dan Williams:
 "This is a libnvdimm ABI fixup.

  I pushed back on this change quite hard given the late date, that it
  appears to be purely cosmetic, sysfs is not necessarily meant to be a
  user friendly UI, and the kernel interprets the reversed polarity of
  the ACPI_NFIT_MEM_ARMED flag correctly.  When this flag is set, the
  energy source of an NVDIMM is not armed and any new writes to the DIMM
  may not be preserved.

  However, Bob Moore warned me that it is important to get these things
  named correctly wherever they appear otherwise we run the risk of a
  less than cautious firmware engineer implementing the polarity the
  wrong way.  Once a mistake like that escapes into production platforms
  the flag becomes useless and we need to move to a new bit position.

  Bob has agreed to take a change through ACPICA to rename
  ACPI_NFIT_MEM_ARMED to ACPI_NFIT_MEM_NOT_ARMED, and the patch below
  from Toshi brings the sysfs representation of these flags in line with
  their respective polarities.

  Please pull for 4.2 as this is the first kernel to expose the ACPI
  NFIT sysfs representation, and this is likely a kernel that firmware
  developers will be using for checking out their NVDIMM enabling"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nfit: Clarify memory device state flags strings
2015-08-27 17:46:06 -07:00
Carol L Soto
b0f6446377 net/mlx4_core: Fix unintialized variable used in error path
The uninitialized value name in mlx4_en_activate_cq was used in order
to print an error message. Fixing it by replacing it with cq->vector.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 16:40:27 -07:00
Carol L Soto
9293267a3e net/mlx4_core: Capping number of requested MSIXs to MAX_MSIX
We currently manage IRQs in pool_bm which is a bit field
of MAX_MSIX bits. Thus, allocating more than MAX_MSIX
interrupts can't be managed in pool_bm.
Fixing this by capping number of requested MSIXs to
MAX_MSIX.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 16:40:26 -07:00