Commit graph

79,953 commits

Author SHA1 Message Date
John Crispin
5fff610b7c MIPS: ralink: adds early_printk support
Add the code needed to make early printk work.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4897/
2013-02-17 01:25:31 +01:00
John Crispin
3a5bfe7bdb MIPS: ralink: adds OF code
Until there is a generic MIPS way of handing the DTB over from bootloader to
kernel we rely on a built in devicetrees. The OF code also remaps those register
ranges that we use global in our drivers.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4895/
2013-02-17 01:25:31 +01:00
John Crispin
3f0a06b036 MIPS: ralink: adds clkdev code
These SoCs have a limited number of fixed rate clocks. Add support for the
clk and clkdev api.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4894/
2013-02-17 01:25:30 +01:00
John Crispin
7e47cefa69 MIPS: ralink: adds prom and cmdline code
Add minimal code to handle commandlines.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4892/
2013-02-17 01:25:30 +01:00
John Crispin
c06e836ada MIPS: ralink: adds reset code
Resetting these SoCs requires no real magic. The code is straight forward.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4891/
2013-02-17 01:25:29 +01:00
John Crispin
19d3814e7b MIPS: ralink: adds irq code
All of the Ralink Wifi SoC currently supported by this series share the same
interrupt controller (INTC).

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4890/
2013-02-17 01:25:29 +01:00
John Crispin
8563991026 MIPS: ralink: adds include files
Before we start adding the platform code we add the common include files.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4893/
2013-02-17 01:25:28 +01:00
Gabor Juhos
9c099c4e79 MIPS: ath79: simplify MISC IRQ handling
The current code uses multiple if statements for
demultiplexing the different interrupt sources.
Additionally, the MISC interrupt controller has
32 interrupt sources and the current code does not
handles all of them.

Get rid of the if statements and process all interrupt
sources in a loop to fix these issues.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4874/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 01:25:27 +01:00
Gabor Juhos
f160a289e0 MIPS: ath79: simplify ath79_gpio_function_* routines
Make ath79_gpio_function_{en,dis}able to be wrappers
around ath79_gpio_function_setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4871/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 01:25:27 +01:00
Gabor Juhos
8838becdf5 MIPS: ath79: fix GPIO function selection for AR934x SoCs
GPIO function selection is not working on the AR934x
SoCs because the offset of the function selection
register is different on those.

Add a helper routine which returns the correct
register address based on the SoC type, and use
that in the 'ath79_gpio_function_*' routines.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4870/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 01:25:27 +01:00
Steven J. Hill
778eeb1b19 MIPS: Add new GIC clocksource.
Add new clocksource that uses the counter present on the MIPS
Global Interrupt Controller.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Patchwork: http://patchwork.linux-mips.org/patch/4681/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 01:25:21 +01:00
Steven J. Hill
4cb764b454 MIPS: dsp: Simplify the DSP macros.
Simplify the DSP macros for vanilla (non-microMIPS) kernels and
toolchains that do not support the DSP ASEs.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Patchwork: http://patchwork.linux-mips.org/patch/4687/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:24 +01:00
Steven J. Hill
d0c1b478e0 MIPS: dsp: Support toolchains without DSP ASE and microMIPS.
Add macros to support the DSP ASE with microMIPS kernels when the
toolchain does not have support.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Patchwork: http://patchwork.linux-mips.org/patch/4686/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:24 +01:00
Steven J. Hill
32a7ede673 MIPS: dsp: Add assembler support for DSP ASEs.
Newer toolchains support the DSP and DSP Rev2 instructions. This patch
performs a check for that support and adds compiler and assembler
flags for only the files that need use those instructions.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4752/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:23 +01:00
Steven J. Hill
f8fa4811db MIPS: Add support for the M14KEc core.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Patchwork: http://patchwork.linux-mips.org/patch/4682/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:23 +01:00
Steven J. Hill
127993e561 MIPS: Clean-ups for MIPS Technologies Inc. generic header file.
Clean up standard header text and remove unused #define.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Patchwork: http://patchwork.linux-mips.org/patch/4703/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:22 +01:00
Jayachandran C
7b53eb4d40 MIPS: PCI: Multi-node PCI support for Netlogic XLP
On a multi-chip XLP board, each node can have 4 PCIe links. Update
XLP PCI code to initialize PCIe on all the nodes.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4803/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:22 +01:00
Jayachandran C
cba3b64303 MIPS: Netlogic: Fix for quad-XLP boot
On multi-chip boards, the first core on slave SoCs may take much
more time to wakeup. Add code to wait for the core to come up before
proceeding with the rest of the boot up.

Update xlp_wakeup_core to also skip the boot node and the boot CPU
initialization which is already complete.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4783/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:22 +01:00
Jayachandran C
37a7059bc4 MIPS: Netlogic: use preset loops per jiffy
Doing calibrate delay on a hardware thread will be inaccurate since
it depends on the load on other threads in the core. It will also
slow down the boot process when done for 128 hardware threads. Switch
to a pre-computed loops per jiffy based on the core frequency. The
value is computed based on the core frequency and roughly matches the
value calculated by calibrate_delay().

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4791/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:21 +01:00
Jayachandran C
5a4cbe3811 MIPS: Netlogic: No hazards needed for XLR/XLS
TLB and COP0 hazards are handled in hardware for Netlogic XLR/XLS
SoCs. Update hazards.h to pick more optimal set of definitions when
compiling for XLR/XLS.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4788/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:21 +01:00
Jayachandran C
8cd3d64c57 MIPS: PCI: Prevent hang on XLP reg read
Reading PCI extended register at 0x255 on a bridge will hang if there
is no device connected on the link. Make PCI read routine skip this
register.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4789/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:20 +01:00
Jayachandran C
4e45e542cd MIPS: Netlogic: Use PIC timer as a clocksource
The XLR/XLS/XLP PIC has a 8 countdown timers which run at the PIC
frequencey. One of these can be used as a clocksource to provide
timestamps that is common across cores. This can be used in place
of the count/compare clocksource which is per-CPU.

On XLR/XLS PIC registers are 32-bit, so we just use the lower 32-bits
of the PIC counter. On XLP, the whole 64-bit can be used.

Provide common macros and functions for PIC timer registers on XLR/XLS
and XLP, and use them to register a PIC clocksource.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4786/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:20 +01:00
Jayachandran C
a69ba6293d MIPS: Netlogic: Split XLP L1 i-cache among threads
Since we now use r4k cache code for Netlogic XLP, it is
better to split L1 icache among the active threads, so that
threads won't step on each other while flushing icache.

The L1 dcache is already split among the threads in the core.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4787/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:20 +01:00
Jayachandran C
a264b5e8dc MIPS: PCI: Byteswap not needed in little-endian mode
Rename function xlp_enable_pci_bswap() to xlp_config_pci_bswap(), which
is a better description for its functionality.  When compiled in
big-endian mode, xlp_config_pci_bswap() will configure the PCIe links
to byteswap.  In little-endian mode, no swap configuration is needed
for the PCIe controller, and the function is empty.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4802/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:19 +01:00
Jayachandran C
220d9122e8 MIPS: Netlogic: Optimize EIMR/EIRR accesses in 32-bit
Provide functions ack_c0_eirr(), set_c0_eimr(), clear_c0_eimr()
and read_c0_eirr_and_eimr() that do the EIMR and EIRR operations
and update the interrupt handling code to use these functions.
Also, use the EIMR register functions to mask interrupts in the
irq code.

The 64-bit interrupt request and mask registers (EIRR and EIMR) are
accessed when the interrupts are off, and the common operations are
to set or clear a bit in these registers. Using the 64-bit c0 access
functions for these operations is not optimal in 32-bit, because it
will disable/restore interrupts and split/join the 64-bit value during
each register access.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4790/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:19 +01:00
Jayachandran C
f0cb40e5c3 MIPS: Netlogic: add XLS6xx to FMN config
Add support for XLS6xx CPUs to the Fast Message Network (FMN)
configuration.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4785/
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:18 +01:00
John Crispin
2636562594 MIPS: lantiq: rework external irq code
This code makes the irqs used by the EIU loadable from the DT. Additionally we
add a helper that allows the pinctrl layer to map external irqs to real irq
numbers.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4818/
2013-02-17 00:15:18 +01:00
John Crispin
bae696a267 MIPS: lantiq: improve pci reset gpio handling
We need to make sure that the reset gpio is available and also set a sane
default state.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4817/
2013-02-17 00:15:17 +01:00
John Crispin
d0c550dc36 MIPS: lantiq: add GPHY clock gate bits
Explicitly enable the clock gate of the internal GPHYs found on xrx200.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4816/
2013-02-17 00:15:17 +01:00
John Crispin
740c606e8e MIPS: lantiq: adds static clock for PP32
The Lantiq DSL SoCs have an internal networking processor. Add code to read
the static clock rate.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4815/
2013-02-17 00:15:17 +01:00
John Crispin
3d18c17e4f MIPS: lantiq: trivial typo fix
"nodes" is written with a single "s"

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4814/
2013-02-17 00:15:16 +01:00
John Crispin
42f3caef03 MIPS: show correct cpu name for 24KEc
Make sure 24KEc is properly identified inside /proc/cpuinfo

Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17 00:15:16 +01:00
Ben Dooks
251019fb97 ARM: 7650/1: mm: replace direct access to mm->context.id with new macro
The mmid macro is meant to be used to get the mm->context.id data
from the mm structure, but it seems to have been missed in a cuple
of files.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-16 17:54:27 +00:00
Ben Dooks
9520a5bece ARM: 7649/1: mm: mm->context.id fix for big-endian
Since the new ASID code in b5466f8728
("ARM: mm: remove IPI broadcasting on ASID rollover") was changed to
use 64bit operations it has broken the BE operation due to an issue
with the MM code accessing sub-fields of mm->context.id.

When running in BE mode we see the values in mm->context.id are stored
with the highest value first, so the LDR in the arch/arm/mm/proc-macros.S
reads the wrong part of this field. To resolve this, change the LDR in
the mmid macro to load from +4.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-16 17:54:26 +00:00
Thierry Reding
352af7d4dd ARM: 7648/1: pci: Allow passing per-controller private data
In order to allow drivers to specify private data for each controller,
this commit adds a private_data field to the struct hw_pci. This field
is an array of nr_controllers pointers that will be used to initialize
the private_data field of the corresponding controller's pci_sys_data
structure.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-16 17:54:25 +00:00
Thierry Reding
276fd3c5f8 ARM: 7647/1: pci: Keep pci_common_init() around after init
When using deferred driver probing, PCI host controller drivers may
actually require this function after the init stage.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-16 17:54:24 +00:00
Russell King
bce2bd3cda ARM: fix warnings introduced by previous patch
869486d5f51 (ARM: 7646/1: mm: use static_vm for managing static mapped
areas) introduced new warnings:

arch/arm/mm/mmu.c: In function 'pci_reserve_io':
arch/arm/mm/mmu.c:888:16: warning: unused variable 'addr'
arch/arm/mm/mmu.c:887:20: warning: unused variable 'vm'

because it failed to delete the two local variables it no longer used.
Fix this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-16 17:54:23 +00:00
Joonsoo Kim
101eeda38c ARM: 7646/1: mm: use static_vm for managing static mapped areas
A static mapped area is ARM-specific, so it is better not to use
generic vmalloc data structure, that is, vmlist and vmlist_lock
for managing static mapped area. And it causes some needless overhead and
reducing this overhead is better idea.

Now, we have newly introduced static_vm infrastructure.
With it, we don't need to iterate all mapped areas. Instead, we just
iterate static mapped areas. It helps to reduce an overhead of finding
matched area. And architecture dependency on vmalloc layer is removed,
so it will help to maintainability for vmalloc layer.

Reviewed-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-16 17:54:22 +00:00
Joonsoo Kim
ed8fd2186a ARM: 7645/1: ioremap: introduce an infrastructure for static mapped area
In current implementation, we used ARM-specific flag, that is,
VM_ARM_STATIC_MAPPING, for distinguishing ARM specific static mapped area.
The purpose of static mapped area is to re-use static mapped area when
entire physical address range of the ioremap request can be covered
by this area.

This implementation causes needless overhead for some cases.
For example, assume that there is only one static mapped area and
vmlist has 300 areas. Every time we call ioremap, we check 300 areas for
deciding whether it is matched or not. Moreover, even if there is
no static mapped area and vmlist has 300 areas, every time we call
ioremap, we check 300 areas in now.

If we construct a extra list for static mapped area, we can eliminate
above mentioned overhead.
With a extra list, if there is one static mapped area,
we just check only one area and proceed next operation quickly.

In fact, it is not a critical problem, because ioremap is not frequently
used. But reducing overhead is better idea.

Another reason for doing this work is for removing architecture dependency
on vmalloc layer. I think that vmlist and vmlist_lock is internal data
structure for vmalloc layer. Some codes for debugging and stat inevitably
use vmlist and vmlist_lock. But it is preferable that they are used
as least as possible in outside of vmalloc.c

Now, I introduce an ARM-specific infrastructure for static mapped area. In
the following patch, we will use this and resolve above mentioned problem.

Reviewed-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-16 17:54:22 +00:00
Joonsoo Kim
48dc369d21 ARM: 7644/1: vmregion: remove vmregion code entirely
Now, there is no user for vmregion.
So remove it.

Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-16 17:54:21 +00:00
Will Deacon
5d1c20bce5 ARM: 7637/1: memory: use SZ_ constants for defining the virtual memory layout
Parts of the virtual memory layout (mainly the modules area) are
described using open-coded immediate values.

Use the SZ_ definitions from linux/sizes.h instead to make the code
clearer.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-16 17:54:17 +00:00
Jacob Shin
e259514eef perf/x86/amd: Enable northbridge performance counters on AMD family 15h
On AMD family 15h processors, there are 4 new performance
counters (in addition to 6 core performance counters) that can
be used for counting northbridge events (i.e. DRAM accesses).

Their bit fields are almost identical to the core performance
counters. However, unlike the core performance counters, these
MSRs are shared between multiple cores (that share the same
northbridge).

We will reuse the same code path as existing family 10h
northbridge event constraints handler logic to enforce
this sharing.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jacob Shin <jacob.shin@amd.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-7-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-16 09:37:27 +01:00
Ralf Baechle
5b003119ab MIPS: Cleanup break and trap codes.
Very ancient out-of-tree KDB versions were using BRK_KDB code but it's
unused in modern kernels since a long time.  Delete it.

The microMIPS encoding only reserves 4 bits for a trap code so it's time
for further weedkilling.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-15 23:07:38 +01:00
Steven J. Hill
8e8dc33543 MIPS: Redefine value of BRK_BUG.
The BRK_BUG value is used in the BUG and __BUG_ON inline macros. For
standard MIPS cores the code in the 'tne' instruction is 10-bits long.
In microMIPS, the 'tne' instruction is recoded and the code can only be
4-bits long. We change the value to 12 instead of 512 so that both classic
and microMIPS kernels build.

[ralf@linux-mips.org: Many of the break codes starting from 0 are used
across many MIPS UNIX variants.  Codes starting from 512 are operating
system specific additions.  1023 again is also used by other operating
systems]

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-15 23:07:38 +01:00
Steven J. Hill
a96102be70 MIPS: Add printing of ISA version in cpuinfo.
Display the MIPS ISA version release in the /proc/cpuinfo file.

[ralf@linux-mips.org: Add support for MIPS I ... IV legacy architecture
revisions.  Also differenciate between MIPS32 and MIPS64 versions instead
of lumping them together as just r1 and r2.

Note to application programmers: this indicates the CPU's ISA level
It does not imply the current execution environment does support it.  For
example an O32 application seeing "mips64r2" would still be restricted by
by the execution environment to 32-bit - but the kernel could run mips64r2
code.  The same for a 32-bit kernel running on a 64-bit processor.  This
field doesn't include ASEs or optional architecture modules nor other
detailed flags such as the availability of an FPU.]

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/4714/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-15 23:07:38 +01:00
Venkat Subbiah
0e49caf661 MIPS: Octeon: Adding driver to measure interrupt latency on Octeon.
Signed-off-by: Venkat Subbiah <venkat.subbiah@cavium.com>
[Rewrote timeing calculations]
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4660/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-15 23:07:37 +01:00
Julia Lawall
42913c7992 MIPS: Loongson2: Use clk API instead of direct dereferences
A struct clk value is intended to be an abstract pointer, so it should be
manipulated using the various API functions.

clk_put is additionally added on the failure paths.

The semantic match that finds the first problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1;
identifier i;
@@

*e = clk_get(...)
 ... when != e = e1
     when any
*e->i
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: kernel-janitors@vger.kernel.org
Cc: linux-mips@linux-mips.org,
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4751/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-15 23:07:37 +01:00
Scott Wood
64871ff6e8 powerpc/e500/qemu-e500: enable coreint
The MPIC code will disable coreint if it detects an insufficient
MPIC version.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-15 14:13:26 -06:00
Scott Wood
7c509ee014 powerpc/mpic: allow coreint to be determined by MPIC version
This will be used by the qemu-e500 platform, as the MPIC version (and
thus whether we have coreint) depends on how QEMU is configured.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-15 14:13:22 -06:00
Linus Torvalds
f741656d64 Revert the PVonHVM kexec. The patch introduces a regression
with older hypervisor stacks, such as Xen 4.1.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRHZ7eAAoJEFjIrFwIi8fJZ+sH/ieMkzdBB6aqbFMcNr7mkfBo
 i3swjO2JQI7REYIHfKEVoR3IgHfqKEuABdeEQrceE0XqDepFh84YiKGI2QpPRWEA
 903vUV4DXVdcBrypbL45tSFZ1Jxsrzx+F7WfV/f9WHyeiwOyaZTGVQH0VuOzpcum
 RvPTT7MmC7g8MJDi66SDYBaX/pBQzifQ81nMWWjXNw0w4CwWX7le1cScZEP42MR6
 jTEHzYMLDojdO+2aQM5pt/0CGI5tzBHtX5nNRl6tovlPI3ckknYYx6a7RfxkfZzF
 IkMIuGS32yLfsswPPIiMs47/Qgiq3BN6eSTJXMZKUwQokL9yEs8LodcnRDYfgyQ=
 =fqcJ
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull xen fixes from Konrad Rzeszutek Wilk:
 "Two fixes:

   - A simple bug-fix for redundant NULL check.

   - CVE-2013-0228/XSA-42: x86/xen: don't assume %ds is usable in
     xen_iret for 32-bit PVOPS

  and two reverts:

   - Revert the PVonHVM kexec.  The patch introduces a regression with
     older hypervisor stacks, such as Xen 4.1."

* tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  Revert "xen PVonHVM: use E820_Reserved area for shared_info"
  Revert "xen/PVonHVM: fix compile warning in init_hvm_pv_info"
  xen: remove redundant NULL check before unregister_and_remove_pcpu().
  x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.
2013-02-15 12:12:55 -08:00