mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-15 19:56:03 +00:00
678,699 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
a4aab099cc |
ath10k: fix spectral scan for QCA99X0 family of chipsets
spectral_bin length (number of bins per fft sample) is usually a value where (2^n = value), n is an integer. All of the QCA99X0 family of chipsets seems to report a spectral_bin length of 2^n + 'm' bytes, where m = 4, 12 based on the chipset. This 'm' bytes seems to carry some radar related info which is currently discarded only for 'bin_len = 68' bytes. Extend this discarding of irrelevant 'bin_len' for QCA9984, QCA9888, IPQ4019 as well by introducing a hardware parameter 'spectral_bin_discard'. Also for QCA988X based family of chipsets which doesn't seem to have this issue and also for some of the hardware which I have not tested like QCA6174/QCA9377 the existing behaviour is retained as it is. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> |
||
|
|
17e310b8ee |
Add clock for CPPI 4.1 DMA engine thats
part of USB OTG subsystem on DA830 and DA850. This builds on top of the pull request sent earlier: https://www.spinics.net/lists/arm-kernel/msg573985.html -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY7eaYAAoJEGFBu2jqvgRN6UAP/0DdWfDVUs4dr4eGpknSpuWI HOGnlqwZhCujNhavrAkxfYXsNezAgtPOskWJ/ssNHjQwJlkL1QQ49up/wYSFwouA 6VoomcAcsRlcVkQ0ZImq5czGl+xlbNvF9+WU9JDSkoajdbFyaB/Ni2YCTVkeBI3a Hvh74tXgs0EmZT0spjW4jlMqmEmdDT739YEpopnIKNIwgnkUWkSNRv0XBNemE/Oh a0qLgff0YQtyObklicy3yMRyU81cdFgWRPQe/lsNJAO+HtQoLgDLpGg96yzZfCEM SAtnKBexc16l2wO7UPd41iu1JQjlqJWiukoaqw7YHnlKIj9U/ZgM32Ob9a6Qd60s EOukXRdrsqTGhAVG2c2sTda0TLB3MG69AHb65HdbE99Pn2l5b73nEPETgAp4DEMh oSnPpXY/joGxf7dR3+94Zj2VmZ4bC1OajejErLnv6tOmYJpWhJkCGWGTIEy4ZBNe 5czidYr9n66GtzpVhsHbv2k3T0SVrLEcQFfLZVTeckxuykAZIXp4q0YHOFS5kl85 T9tCL7KLDxUjdi4aArVPblcmDIwq3ZNygSc3IUr/UXC6A/ZdCcgZ5LjFaM3BB1O+ 9RFLjndF6XMre7geSa6Mm2hTUedQrt7unurHaYAkIfxBRc6XrDDblXm9f8fh/clz 9VSwPRqXuoNO5OyY5BFk =gHAD -----END PGP SIGNATURE----- Merge tag 'davinci-for-v4.12/soc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc Add clock for CPPI 4.1 DMA engine thats part of USB OTG subsystem on DA830 and DA850. This builds on top of the pull request sent earlier: https://www.spinics.net/lists/arm-kernel/msg573985.html * tag 'davinci-for-v4.12/soc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: Add clock for CPPI 4.1 DMA engine Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
1bbecc8cd0 |
SoC for 4.12:
- huge PM cleanup - Move SoC detection to its own driver -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEl0I5XWmUIrwBfFMm2KKDO9oT4sIFAljrtPEACgkQ2KKDO9oT 4sKj5g/+OpnpOZWlnV7poaiFcRXKupKgfL913o0jmsc33h5e5OIt9G+woWcPSn+D F68ArSKCKo54SNq1ZGE8imwrkAkBLcl4afBs5rZ67JJI5fBG3Wguj/smUxS5tthX SfNGd2t7SAGc/9NlQR7W3gizS/ATCrDoCdSpHYIV5zzjf0zbnqgjmWbfkhhc+45b /7A/PGFqAL53CpXxTzjkYP5HejWZ5qV5grjc884sUdHNeScteqlCCXDX2VVDtKC+ hWBV8afizdOOSRDfXSPfGIk/LP1VP7zswotJf0RojzxKWk+RJEkNYr6CHNqugNhe MRWdBWRat1HeQ9jK9rr4U6tJhNhnfJWTPtz7Nf+GeZIxrc2RDALBV9w9Z7ikl3rv Or7sCmV/49RWCHOzeBg1ldv/kIq0rlZb8/UKkB0buuymNf/gpiW4VfbT0xBoURee P8/1nY6mkQNhbesu0T2KYkwYTGLXcorS6gndx0eq8NooRbkl/BSd2rxSlyGDIKxc OrFo/aexOP0akmyN1SGRx2i9Pv5Ke+Lq1f4tYFtHFhqZEeVCHMMSPZdaBvclko5D 1HSh8DCxWMMQXirwrYMQwJ2mdcCK/numQIywKKvYbLB1N1OahJkupXb3l+DftiTo 2AU8gBLMs7Xj3e/oq5Sms/yhJxj5g3TQwyjLN4jPO0+4M/0zLfs= =rsRg -----END PGP SIGNATURE----- Merge tag 'at91-ab-4.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc SoC for 4.12: - huge PM cleanup - Move SoC detection to its own driver * tag 'at91-ab-4.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: move SoC detection to its own driver ARM: at91: pm: correct typo ARM: at91: pm: Remove at91_pm_set_standby ARM: at91: pm: Merge all at91sam9*_pm_init ARM: at91: pm: Tie the USB clock mask to the pmc ARM: at91: pm: Tie the memory controller type to the ramc id ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories. ARM: at91: pm: Simplify at91rm9200_standby ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S ARM: at91: pm: Move global variables into at91_pm_data ARM: at91: pm: Move at91_ramc_read/write to pm.c ARM: at91: pm: Cleanup headers MAINTAINERS: Add memory drivers to AT91 entry MAINTAINERS: Update AT91 entry ARM: at91: pm: cpu_idle: switch DDR to power-down mode Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node" Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
d7718c147a |
ARM: mach-hisi: Hisilicon SoC updates for 4.12
- Fix the error return code in hip04_smp_init -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY6IFTAAoJEAvIV27ZiWZcR78P/3e9yd9dcZXzjfYD9UMzxW67 h7CloL9U1c3xC8vvPvU8tbCdiZQAvhU6JWmfJlBap2gVUDcPLmFgl8zDOnUG8Ar+ Qx4jruv7Kd5m0HrugZIdHxLeuK4DrdRy/gz6LG49V0J8eoMJPtcJAo/8i4gso12C mr98lYs8FUHoETYEgeSw2oU73I7oTJhLymvTSSAs5bCsYdST6Y9+KpF/tISi8Yqm ezSpUjp7b089QZD0K6zsET0EgNYWF2vejOYi1jKIrejF7K4pJWPKp7xduqCDCYjQ vV3n/JLDZyDSXD0JKgBEuYHYyiII3O8us2m5yPx6UWpCTXzH4z28nMy6hlY9uBJ3 2zN9SOJGJutmXOBPoewPzy20wS9bFwTIsRTGPrTZia3SaHFoe/S4gaeWcnVWQzs+ op9FpM7iLxpHO/ZWUqKwJoFUFeHJhzo/WUb3GRcVadHhTD3/lrONIvyGKsuBWIUq 682IGb9S7il1RIB48383tFzgW9HUNeHXta9dnOsV3/EmlDI/2szDXd34Ncz9m2oP MRlDccc90I79g2nGKE0+1Axu5h5bkdsOKhkcc2PYCtq0Q290wnhaTd0Q23ie+hQX dZN9oSGffXThbUoJaVceHPA7t+HGIek21FYHyIYLFc+jcMgRIEXmgMft05b56kWX gvwHlW9jUukK7lvG39IV =HwMR -----END PGP SIGNATURE----- Merge tag 'hisi-armv7-soc-for-4.12' of git://github.com/hisilicon/linux-hisi into next/soc ARM: mach-hisi: Hisilicon SoC updates for 4.12 - Fix the error return code in hip04_smp_init * tag 'hisi-armv7-soc-for-4.12' of git://github.com/hisilicon/linux-hisi: ARM: hisi: fix error return code in hip04_smp_init() Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
ab57c2b494 |
i.MX SoC changes for 4.12:
- A correction on mmdc_pmu_write_accesses event definition.
- Add new axi_id perf command to support MMDC filter memory usage
profiling.
- Set correct SPI chip_select in platform device registration, so that
spi-imx driver code can be improved to use chip_select directly for
harwdare setup instead of indirectly via the cs_gpio mapping array.
- Disable APIS bus supervisor protect for i.MX25, since the default
configuration doesn't work for a few peripherals accessed through
SDMA.
- Add compatible check for the secondary generation of I2SE i.MX28
Duckbill board support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY64oDAAoJEFBXWFqHsHzO0OcH+wadr5A/YJBUnFqJeQKxaOPU
rZBb0alc4+YLY5OAJ7kj/KFaO9YYDn+Y6N3bwcuHyQ93UZ5xmXWyFAmRJuknDBsj
uH/9a/HwmWNt1XjD8dMw8jVH6/uU4EK02SDwve+GDjl46tS45JISYWLlCfzW1ORt
WCD656/+mnvvWNMFk0l8A6u557PjCuy/z/Eq+CLXzPom72WpTmJMKSicooeWCjCN
2JqvNE1B5ny8QRspgo+1QukoTE3LqbTtPjXdhW3+Xr4R93e46/eKEQ4bCCygcp3O
0DcleV8TqwUXnKGnt/LDoD+fHUjmFFbEWKSYwmo/nlLH7ftRfDUyeZgeFaDzVsQ=
=Ha8G
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
i.MX SoC changes for 4.12:
- A correction on mmdc_pmu_write_accesses event definition.
- Add new axi_id perf command to support MMDC filter memory usage
profiling.
- Set correct SPI chip_select in platform device registration, so that
spi-imx driver code can be improved to use chip_select directly for
harwdare setup instead of indirectly via the cs_gpio mapping array.
- Disable APIS bus supervisor protect for i.MX25, since the default
configuration doesn't work for a few peripherals accessed through
SDMA.
- Add compatible check for the secondary generation of I2SE i.MX28
Duckbill board support.
* tag 'imx-soc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: mxs: add support for I2SE Duckbill 2 boards
ARM: i.MX25: globally disable supervisor protect
ARM: imx: set correct chip_select in platform setup
ARM: imx: Add AXI address filter support for MMDC profiling
ARM: imx: Fix mmdc_pmu_write_accesses event definition
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
|
627871b71c |
ath9k: Add cast to u8 to FREQ2FBIN macro
The macro results are assigned to u8 variables/fields. Adding the cast fixes plenty of clang warnings about "implicit conversion from 'int' to 'u8'". Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> |
||
|
|
dd726fcb6b |
Samsung ARM64 update for v4.12:
1. Exynos power management drivers support now ARMv8 SoC - Exynos5433 - so
select them in ARCH_EXYNOS.
2. Enable few Exynos drivers for supported ARMv8 SoCs.
-----BEGIN PGP SIGNATURE-----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=lXKo
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Samsung ARM64 update for v4.12:
1. Exynos power management drivers support now ARMv8 SoC - Exynos5433 - so
select them in ARCH_EXYNOS.
2. Enable few Exynos drivers for supported ARMv8 SoCs.
* tag 'samsung-soc64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7
arm64: exynos: Enable Exynos PMU and PM domains drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
|
050fd820dc |
ath9k: Add Dell Wireless 1601 with wowlan capability
Add the Dell Wireless 1601 card as an AR9462 in the ath9k pci list. Note that the wowlan feature is supported and has been tested successfully. Signed-off-by: Damien Thébault <damien@dtbo.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> |
||
|
|
d12523f14e |
Samsung SoC drivers update for v4.12 - split building of the PMU driver between
ARMv7 and ARMv8. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY6Os5AAoJEME3ZuaGi4PXD9MP/2Yptk98gN/UCV9CnYjJns9+ 6DIyQS3nVKBd2kz5Vp6e4ClpRfNbC3TrX2zfIIW1yICy8Y3URuFhhoT/wrzqRdIw eYjQnuKzUnA6yacERdnBbPMyRnZIClfcWAQoo2gu8KC/LbDilfLk03pdtVk6gKH5 4AD2bWHGcq5TWFGtB+Ynpt3PIHCJH7s6Lwvcsk2Bl8PTTCRUxPKbzwgw0t5FHTjB cg/G4mxVGATdwpMpcONnV2XTgm2/ckIL578Dq+qwVHj/lViJwegJnBlWd3zn8GEw xzFUz3SM4mnxbukOucWvCN+D9jLSBZ1eUMRp+JTp4G+SEnnJ7JZznnXkqaik2b3j CD4jC+l86RTZ04cBLdevx9JccMjrFxVTVYKeVIKjifJngM7sZ1v3cUc4zJJthadn eco47qS0YU2hIjDqiul4vBk6hSFgDUo/zzAYO8LyGTVLy2KqrgAxNhGLCF+/Hhzp XM8JF9b+DWdOC6mnUM85eiQNLHV6ZJAwxqJCW7Q6Rh/aEkJ82kfbSMe7t8Noi6df hwQK7SvyRqtHc7JiILk+u2JNYDh/EISOyxePIQvRHiZlHDXhVVBP9J05+/rgb6yt e7RMuoVYGaNYBIZx37AUVZwpZWKxlzwQjuKGRr1RSt7KUSmoiklvtPtQ1GIiSRb0 EfRF3M9+47qPVKv1AVab =Wfmu -----END PGP SIGNATURE----- Merge tag 'samsung-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Samsung SoC drivers update for v4.12 - split building of the PMU driver between ARMv7 and ARMv8. * tag 'samsung-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: Do not build ARMv7 PMU drivers on ARMv8 Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
b7dcf68f38 |
ath9k: off by one in ath9k_hw_nvram_read_array()
The > should be >= or we read one space beyond the end of the array.
Fixes:
|
||
|
|
32d8b52b90 |
Renesas ARM Based SoC Sysc Updates for v4.12
* Add support for R-Car H3 ES2.0 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY59ObAAoJENfPZGlqN0++mmAP/iLPRVjE0DoqVVQbNeIq4pOI 0HaIU2MZH6cPN2868CBp+8/UsPQXUBtpBRdRsc7+B2gSQteFhEZ8b+tTJ007BohM YO4XSSfwEUedKoPB5N88hleGrXjvUbNBECOeD5XSOX3X9qQLDUkzpgDgfL0WPl6D gU3G7IitR2KnBTz5n8XbrdTVccZbafXutj3Sp8pTxd4Yc8ajL8MkxbwTjlGratfw sOUW1zxIv7c9eanfbYZQ3ZGNm++2w/WnqhPBTYfxcBVK95dslWjkxf7HawujeaP7 CihAakoH9QoYsrnyEMbMn4xpCJEYB8U5zaIzyOFHhGCtF5AXUrKFcn1DMpU7sORJ mu4UDUHIugGsu/RdOcOdB/dZ5GcfFtVehDLKtAGdoAwyc6eY9URAwOlOV9abOCtf qWSGHv0dKCVg5fLcuCzXMYd7DxXN1X4A0wj94S6XF5S1/wcWJaOU2uJKPSguoUzW vQt4jIM7TUUK6YAVj0xec40lXf0AuJ4FcXI/9TEnYnmqzOEwZzKzrlMv3xnqp08k jQarhWJLvN23lDAtGOorLJKOZyveXy0E3I9IJT8PgZpGmOlijSRBzhXsN1NeGsYo 663+3feI4Qe5vtu8Obv/vA0BcYHiA+AcEBwWYFAZOGGSM2IucORxX9UAu8XBmtRB FnS/AB2yrsoL9VjKgeYt =m+ef -----END PGP SIGNATURE----- Merge tag 'renesas-sysc-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Renesas ARM Based SoC Sysc Updates for v4.12 * Add support for R-Car H3 ES2.0 * tag 'renesas-sysc-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0 soc: renesas: rcar-sysc: Add support for fixing up power area tables soc: renesas: Register SoC device early base: soc: Allow early registration of a single SoC device base: soc: Let soc_device_match() return no match when called too early Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
214b8b8e0e |
Alpine DT changes for 4.12
A bunch of clean up for Alpine device trees, nothing fancy. -----BEGIN PGP SIGNATURE----- iQIcBAABCgAGBQJY8R9iAAoJEFxNi8it27zYMTMP/1SE9M1Gy5nngeTxVTJeTvbf vTElGQ6FzV9HBkL88b3+fVcUWh0YTlffzUWE7cfPPOaaXkImYRF+7QrL8zht9nS8 SIIjS1j/wVBm0Zl4/vuYiMZJR0CJOLypFV8ELb24Xj96Mt7idUHGZNL4T8ygCd8W HoKNDhpstg7rHPJFjjDM6OanQbhTJIpxfkKbBNfe+wg1e9O3Jj082ldOFU9jkS6D wTu8XFYo+YnbIrK+K4HuK2V0sawOPK9ga0/+6K9TChN20pO/dsphlMpkL1VPc7Vf lK3Mt3eeR9GOCQvIh4gzcPjcJGtlWbjlvCsLsb7oXP9s1CxxcbGfRgYevIj7S2Lw M/gG0oi2BcdRjx9oc+H0OZYGAcWHMUyCJH6JHYzDi9NKl6hfvbJc/eS6f1c6S4ie boDmBuaVp6N2k7jKtW3D49CEWX4XYgx2weuA/b/fjKyFzcPXCJ+Z/N+506KH9ByR D4um8m6IGeeubALSVh9URkKT/YQDpa8+szGMNDJwN5eyr50rTp1ETSmL4O+stFIX 5qLMdDXMLtmiOQ5qbrKsz4ip3SJMTLvnknbfiCN7EHxs7Tmorth7q1PUoCgsAWHn zFaDlhuHvWmCGshRqFYf+iVpPXD+UZHiHztggXFZ3YafQjfG8iwJw7OlvTcMpWGB u5IlWBm1qM+ynQAhy6mK =aD3G -----END PGP SIGNATURE----- Merge tag 'alpine-dt-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/atenart/linux into next/dt Alpine DT changes for 4.12 A bunch of clean up for Alpine device trees, nothing fancy. * tag 'alpine-dt-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/atenart/linux: ARM: dts: alpine: add valid clock-frequency values ARM: dts: alpine: add spaces before the uart node units. ARM: dts: alpine: remove 0x's from the uart1 node unit address ARM: dts: alpine: fix PCIe node name Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
d6d9ac9e48 |
mvebu dt for 4.12 (part 3)
Use label for USB and SATA nodes on Armada 38x -----BEGIN PGP SIGNATURE----- iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWO+kqSMcZ3JlZ29yeS5j bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71V2vAJ47Vu37Pig3 Quq7c68ByWMNhRv0IgCgpJOKmYRrcibw/AbrHIh6ZZUoN7g= =AtGR -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-4.12-3' of git://git.infradead.org/linux-mvebu into next/dt mvebu dt for 4.12 (part 3) Use label for USB and SATA nodes on Armada 38x * tag 'mvebu-dt-4.12-3' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: label USB and SATA nodes Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
5fadb51017 |
Aspeed devicetree updates for 4.12
Updates to the device tree to include upstreamed drivers: - SPI flash controller - Watchdog - ADC In addition we describe some of the clocks so that upstream kernels can boot on hardware. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY7ZDwAAoJEGt2WQeBR3CeYSkP/2l1HHYbBkIr7778RkHVbnMj LWVAqg9z/PpwMdv5PLER56FtkczxxVsR0zpKIgeX9aRY5VGZdtxSw4lDWvIj6XWu VQNxQtwT+BzybPKgrACaz5GIct8JxnE/7cdvpVTaFJB+wgNXcIUNwkoXMse+GE94 vWuMNKwJhv5aLpoSfgMpcVIx83ZfAzEj1J1ZQ0IvRAnctypZRhvZKSwlIifJmDId UVAzQN9Vd53jJpwZaWtZcfBRRY/oY+KlxLFqrPO3MfxM6DMv7/88/zRbS47DkDsZ l+wfb5f+OvpUos6UbQWItrJv02a6tkgDZNHzLQ38QRCXn5k/FBDCsYj/v09dInqD NIo+0crqgZBf26vZps729H3HxlIBJgrDtkFiAaSUSbHgChm9eXMiZFJoqdLt/6hs kJsnqLTDHnqYX/cZKq6w9xlKBHoH9lI4lbhV1O8Mr2AFtLNbBkIOQMboQfvpjpgW Dm1KdHZm4tAS/mOBvPwu3lTT/WPPwby7Gno5dkNMtG4HTyf773Q//bC6PsVmO9hd VQjwrdvBVZYGqXJfMw03zhj6eAS23PkyuU99BsK2JETj3f2fxrqCFdc43aH04uMW 371yLBI9l7Et2WC+JMsPm5UW5P6yKwlPdYLRr5xJPM3YjoV2zklf0ACi4rEL7Kxp XFQaJ0nRKyCGx0y6O5Zr =bGNK -----END PGP SIGNATURE----- Merge tag 'aspeed-4.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt Aspeed devicetree updates for 4.12 Updates to the device tree to include upstreamed drivers: - SPI flash controller - Watchdog - ADC In addition we describe some of the clocks so that upstream kernels can boot on hardware. * tag 'aspeed-4.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: arm: dts: aspeed: Describe ADCs for AST2400/AST2500 ARM: dts: aspeed: romulus: Add UART1 ARM: dts: aspeed: Update watchdog compatible strings ARM: dts: aspeed: Add a fastread property ARM: dts: aspeed: Add SPI controller bindings to Romulus ARM: dts: aspeed: Make G4 clocks fixed ARM: dts: aspeed: Make G5 clocks fixed ARM: dts: aspeed: add SPI controller bindings Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
286f3f4787 |
HID: wacom: Treat HID_DG_TOOLSERIALNUMBER as unsigned
Because HID_DG_TOOLSERIALNUMBER doesn't first cast the value recieved from HID
to an unsigned type, sign-extension rules can cause the value of
wacom_wac->serial[0] to inadvertently wind up with all 32 of its highest bits
set if the highest bit of "value" was set.
This can cause problems for Tablet PC devices which use AES sensors and the
xf86-input-wacom userspace driver. It is not uncommon for AES sensors to send a
serial number of '0' while the pen is entering or leaving proximity. The
xf86-input-wacom driver ignores events with a serial number of '0' since it
cannot match them up to an in-use tool. To ensure the xf86-input-wacom driver
does not ignore the final out-of-proximity event, the kernel does not send
MSC_SERIAL events when the value of wacom_wac->serial[0] is '0'. If the highest
bit of HID_DG_TOOLSERIALNUMBER is set by an in-prox pen which later leaves
proximity and sends a '0' for HID_DG_TOOLSERIALNUMBER, then only the lowest 32
bits of wacom_wac->serial[0] are actually cleared, causing the kernel to send
an MSC_SERIAL event. Since the 'input_event' function takes an 'int' as
argument, only those lowest (now-cleared) 32 bits of wacom_wac->serial[0] are
sent to userspace, causing xf86-input-wacom to ignore the event. If the event
was the final out-of-prox event, then xf86-input-wacom may remain in a state
where it believes the pen is in proximity and refuses to allow other devices
under its control (e.g. the touchscreen) to move the cursor.
It should be noted that EMR devices and devices which use both the
HID_DG_TOOLSERIALNUMBER and WACOM_HID_WD_SERIALHI usages (in that order) would
be immune to this issue. It appears only AES devices are affected.
Fixes:
|
||
|
|
16101f0510 |
Second set of devicetree changes for omaps for v4.12 merge window
to configure various devices: - Enable DCAN on am57xx-idk - Enable CPSW ethernet0 and 1 on am335x-icev2 - Non-critical fix for droid 4 PMIC interrupt triggering - Stop disabling SRAM and GPMC on droid 4 - Configure CPCAP PMIC related devices on droid 4 for ADC, charger and USB PHY. The charger and USB PHY drivers are still being discussed, but the binding for them has been acked by Rob and Sebastian so they should be safe to merge together with the ADC driver in Linux next that they depend on -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAljruX4RHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXM16g/8DeQMUItFTVrUBfvlHYAakL3hCJKGJQoU 8vL+4N6oGhPzFje65ifX90GuPidKJDffkExbzBZn5K1JapuuafQDZ75QyxkM2tx2 fESMgKNpXe78K+0GQ3sLESB6DQMQCai6H3XUKjXKi/dcG3NG6J9BQJJXdM2jFLsT OxIDVtHmwAJwx/BclmjCPsAKZVW/3HiqMXoiovXb0aQQXNjBqlmhBQUL+YO8Kxwq VOlGhsxzHPubAEv98VQeTUpZR4G+1JljmDP4UW4H2HHdWMzNvZIyd7Tk/6Tr+ek1 GPr89zm9QqpvzVXvLqwRG27EF9EpYbMbcrUn+02YV6Z0Wrbh6m6Hm0fg3nqGrkdC l4DG0SExzGzi/Vxgfw71JyXcyEabF4gOMMLGcVFcAA/83PaRFB5kFENOW0gMLQ5e 9G6zesj/0ET7m/qMAVcExA+gREXOjCswc3twrYx9vYeS03Ma4Jzg7pzmS+Af+Wcn leNviCjVb4aArBAxvEEId0ajVicftc0by61HviRacm1TUL4Gh0mvyJtN3sjRD+8w dFSFVzGpBs9WQWuf82OVss1c4vLN/0I6sTa3RQT2PNUBAA+4GFFWJxrlDTXH8+tp oN2Ubc9JKt8hPJUY3AeXgC35kqloTUIPJARhIbmjeWKTJ1h/FXHBVEEyp3ut/vuE 7/oCbfeW7k0= =Jna8 -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.12/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Second set of devicetree changes for omaps for v4.12 merge window to configure various devices: - Enable DCAN on am57xx-idk - Enable CPSW ethernet0 and 1 on am335x-icev2 - Non-critical fix for droid 4 PMIC interrupt triggering - Stop disabling SRAM and GPMC on droid 4 - Configure CPCAP PMIC related devices on droid 4 for ADC, charger and USB PHY. The charger and USB PHY drivers are still being discussed, but the binding for them has been acked by Rob and Sebastian so they should be safe to merge together with the ADC driver in Linux next that they depend on * tag 'omap-for-v4.12/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration ARM: dts: omap4-droid4: Add CPCAP PMIC battery charger configuration ARM: dts: omap4-droid4: Add CPCAP PMIC ADC configuration ARM: dts: omap4-droid4: Stop disabling SRAM and GPMC ARM: dts: omap4-droid4: Fix interrupt triggering for cpcap ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1 ARM: dts: am57xx-idk: Add DCAN support Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
77f2369789 |
DT for 4.12:
- Add SFRBU on sama5d2 - DT improvements for sama5d2_xplained, sama5d3_xplained, at91sam9x5ek and Axentia TSE-850 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEl0I5XWmUIrwBfFMm2KKDO9oT4sIFAljwf8cACgkQ2KKDO9oT 4sKN+w//WxdbKG6tOOIeIn/qFbbYDQ7mJhpX9h3ZuHntnp3TXCed8dog8ELIKcPP uQzkKvwOMq+MtGpjEFstCpO3YBD7lvjXD1MmhARSVI5B3mvSp3eeQdI7QgzHJHna 0oQaKtQgNo1LxhkK2guo/C3CzTULaSRzLcofRzjdnAg+xeGZgcd8u3yRQ6phfTgZ XZ8QrzpnOAe9se9/oNzyWcIkXSYJkihDp0/0iOfDWUoERek/B4PFUxxKAemONL9o EencH4249RWLk4lZ/RCSWLiSceCV2YebcwL7GcYNINnt17xkS/MaqTmxEyPSp7cJ aGYQr9bD+BIK+YYRuNN6tUlbTXN27+0z74c19yXWQPjcY5sh1W64Yra9LSJKqaKj RTZQyEvKWYoHAcJ9SRFvEUGZmjnEoIr0SeghW2mcBSnBFUOvfWQkzypiYHDgmvlb UMWXRNwqHTpP0n9ogeUW1Hd6aEdsoU5DeMF2FTEC8UxgJt7QukyfmfnywCdSfzuT 9EHAYo3yutb/lQZosRrV252Q3FS/2SpY+p0jaP01w2UFllQpcDil5DnLt9JaepeK bQeE+orOHfkBCNZFzSZjTA6/mQQzzuAYHKq6LPBdGOk0WphWvU17KPZUllJYu9T1 iAnD/1Uh2yJFXQdDYmXtQIi/R037vaSVVtTxyXWKteTdotpALjc= =VO8s -----END PGP SIGNATURE----- Merge tag 'at91-ab-4.12-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt DT for 4.12: - Add SFRBU on sama5d2 - DT improvements for sama5d2_xplained, sama5d3_xplained, at91sam9x5ek and Axentia TSE-850 * tag 'at91-ab-4.12-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: sama5d3_xplained: not all ADC channels are available ARM: dts: at91: sama5d3_xplained: fix ADC vref ARM: dts: at91: add envelope detector mux to the Axentia TSE-850 ARM: dts: at91: Disable SPI on at91sam9x5ek to allow MCI1 to work. ARM: dts: at91: Fix matrix compatible ARM: dts: at91: sama5d2_xplained: enable RTC wakeup ARM: dts: at91: sama5d2: add sfrbu Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
a43315e3dd |
i.MX device tree updates for 4.12:
- New board support: I2SE's i.MX28 Duckbill-2 boards, Gateworks Ventana
i.MX6 GW5903/GW5904, Zodiac Inflight Innovations RDU2 board, Engicam
i.CoreM6 Quad/Dual OpenFrame modules, Boundary Device i.MX6 Quad Plus
SOM.
- Improve compatible string for i.MX50 eSDHC, i.MX7S SRC devices and
i.MX6SX UART device.
- Add interrupts for switch and PHY devices on VF610 ZII Devel C board.
- Add LVDS, LCD backlight, touchscreen and SAI2 support for i.MX6
icore, geam, and isiot boards.
- A series from Lucas Stach to improve i.MX6Q Plus device tree and add
PRE/PRG devices.
- A series from Stefan Agner to update imx7-colibri device tree
regarding to display, PMIC/regulator support.
- Fix PCI bus DTC warnings seen with the latest compiler.
- Set default phy_type and dr_mode for i.MX25 USBOTG port.
- A couple of small improvements on i.MX25 pin function DT header.
- Add audio support for imx6q-cm-fx6 board using Wolfson wm8731 codec
which is muxed to SSI2 device.
- Other random updates, small fixes and trivial cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY65XcAAoJEFBXWFqHsHzO0goH/jVVtrnkbfzjEZ+jSU30XY+L
8kR/R+5+PgT3LXZ/U3ZHWqbLOrYtnsmqUjA4loaRwTfyMEPnkRx86XUE86U/xfVy
FuWhFuQ/lLDyfon/CvrEXQ73+CTq8Q5PBqKefg9twi5fNkN2wRqVCD5i4cVgxMpi
KF6DchLv0eW2Zn6fYySf4zNcOIvbkma/qn/Ju2kZEP6TKadIgYvX5Tcw47d2fKsv
E5vypBXdWlNV4SzZyAm4CS9X3pjIQa8zIXHyJAeiqBY/2H7u6z/UvOqnRt0RFnX5
eaVtHF2DwuC9DyjyNVBK1Fhi/7++nnmbLRvBK9G4LBZNmIbcWJEVMHsQcsDQ2h8=
=hpdP
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree updates for 4.12:
- New board support: I2SE's i.MX28 Duckbill-2 boards, Gateworks Ventana
i.MX6 GW5903/GW5904, Zodiac Inflight Innovations RDU2 board, Engicam
i.CoreM6 Quad/Dual OpenFrame modules, Boundary Device i.MX6 Quad Plus
SOM.
- Improve compatible string for i.MX50 eSDHC, i.MX7S SRC devices and
i.MX6SX UART device.
- Add interrupts for switch and PHY devices on VF610 ZII Devel C board.
- Add LVDS, LCD backlight, touchscreen and SAI2 support for i.MX6
icore, geam, and isiot boards.
- A series from Lucas Stach to improve i.MX6Q Plus device tree and add
PRE/PRG devices.
- A series from Stefan Agner to update imx7-colibri device tree
regarding to display, PMIC/regulator support.
- Fix PCI bus DTC warnings seen with the latest compiler.
- Set default phy_type and dr_mode for i.MX25 USBOTG port.
- A couple of small improvements on i.MX25 pin function DT header.
- Add audio support for imx6q-cm-fx6 board using Wolfson wm8731 codec
which is muxed to SSI2 device.
- Other random updates, small fixes and trivial cleanups.
* tag 'imx-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits)
ARM: dts: imx6q-utilite-pro: add hpd gpio
ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
ARM: dts: imx: add Gateworks Ventana GW5903 support
ARM: dts: i.MX25: add AIPS control registers
ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
ARM: dts: imx7-colibri: remove 1.8V fixed regulator
ARM: dts: imx7-colibri: allow to disable Ethernet rail
ARM: dts: imx7-colibri: fix PMIC voltages
ARM: dts: imx7-colibri: use OF graph to describe the display
ARM: dts: imx6qp-nitrogen6_som2: add Quad Plus variant of the SOM
ARM: dts: imx6q-icore: Add touchscreen node
ARM: dts: vf610-zii-dev-rev-b: change switch2 label
ARM: dts: imx6ul-[geam|isiot]: Add sai2 node
ARM: dts: imx6ul-isiot-common: Add touchscreen node
ARM: dts: imx6ul-isiot: Add i2c nodes
ARM: dts: imx6ul-isiot: Add imx6ul-isiot-common.dtsi
ARM: dts: imx6ul-isiot: Add backlight support for lcdif
ARM: dts: imx6ul-geam: Add backlight support for lcdif
ARM: dts: imx6: add ZII RDU2 boards
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
|
b633b31406 |
Support for the usb-sata controller on the rock2 and another new rk3288
board, the phyCORE som and its PCM-947 carrier board from Phytec. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAljpQsEQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgSw5CACTf+7cvykZ3aKvtfo76yacC84mSMdLFOQl IPkQBX6cV2CEes8xoKjsHXwvYgpgX6Jz58S86ATfi+h3uMu4l7dld+yMaipTcZp/ ROCtf16r+sjq3kndDGoqSFyq5+YZ2En+mz+86YDdEYS3vZvASp+gSVRkn7NUPlrU +O2Wb8mdY+Hl8XYSZcsmQ7zNjxw/G9pyqVly0/3aSuHRVAbtn4KyunbfkhHdK4LJ NOFji0t+FIXEr8FNBpiRFnIQ19KILzWmrIr5c92Tz+t11R8+wSIwITYpsAomwVqO QWtI1alwusJHY2MwdLXlFtBAW3BwsTt72gasl6AigpvYIP0AxKna =R6eU -----END PGP SIGNATURE----- Merge tag 'v4.12-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Support for the usb-sata controller on the rock2 and another new rk3288 board, the phyCORE som and its PCM-947 carrier board from Phytec. * tag 'v4.12-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add support for PCM-947 carrier board dt-bindings: Document Phytec phyCORE-RK3288 RDK ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM ARM: dts: rockchip: Enable sata support on rock2 square Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
6daf2aab1c |
Samsung DeviceTree ARM update for v4.12:
1. Enhancements to PCIe nodes on Exynos5440.
2. Fix thermal values on some of Exynos5420 boards like Odroid XU3.
3. Add proper clock frequency properties to DSI nodes.
4. Fix watchdog reset on Exynos4412.
5. Fix watchdog infinite interrupt in soft mode on Exynos4210,
Exynos5440, S3C64xx and S5Pv210.
6. Enable watchdog on Exynos4 and S3C SoCs.
-----BEGIN PGP SIGNATURE-----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=QHlh
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DeviceTree ARM update for v4.12:
1. Enhancements to PCIe nodes on Exynos5440.
2. Fix thermal values on some of Exynos5420 boards like Odroid XU3.
3. Add proper clock frequency properties to DSI nodes.
4. Fix watchdog reset on Exynos4412.
5. Fix watchdog infinite interrupt in soft mode on Exynos4210,
Exynos5440, S3C64xx and S5Pv210.
6. Enable watchdog on Exynos4 and S3C SoCs.
* tag 'samsung-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: add HDMI controller phandle to exynos4.dtsi
ARM: dts: s5pv210: Fix infinite interrupt in soft mode
ARM: dts: s3c64xx: Fix infinite interrupt in soft mode
ARM: dts: exynos: Fix infinite interrupt in soft mode on Exynos4210 and Exynos5440
ARM: dts: exynos: Enable watchdog on all Exynos4 boards
ARM: dts: s3c64xx: Enable watchdog on all S3C64xx boards
ARM: dts: exynos: Fix watchdog reset on Exynos4412
ARM: dts: exynos: Add the burst and esc clock frequency properties to DSI node
ARM: dts: exynos: Do not ignore real-world fuse values for thermal zone 0 on Exynos5420
ARM: dts: exynos: Add phy-pcie node for pcie to Exynos5440
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
|
107193765b |
mvebu dt for 4.12 (part 2)
Use disk-activity trigger for armada-385-linksys Keep dts alphabetically ordered for clearfog (Armada 388) -----BEGIN PGP SIGNATURE----- iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWOgNoSMcZ3JlZ29yeS5j bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71V3cAJ9gBnFQKIkt jDbi9jpxM7vxznt0VgCgnnYcZsFjE7jFAxs+w4KDVd3jYo8= =XQtw -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-4.12-2' of git://git.infradead.org/linux-mvebu into next/dt mvebu dt for 4.12 (part 2) Use disk-activity trigger for armada-385-linksys Keep dts alphabetically ordered for clearfog (Armada 388) * tag 'mvebu-dt-4.12-2' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-385-linksys: disk-activity trigger for all ARM: dts: clearfog: keep dts alphabetically ordered Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
a51ed6cfb2 |
Second Round of Renesas ARM Based SoC DT Updates for v4.12
Corrections: * Correct clock frequency of X2 DU clock input for r8a7791/koelsch board * Correct Z clock for r8a7792 SoC * Correct parent of SSI[0-9] clocks for r8a779[013] SoCs * Correct ethernet clock parent on r7s72100 SoC * Correct DU clock for r8a7794/silk board Cleanups: * Drop _clk suffix from external CAN clock node name on r8a779[01] SoCs Enhancements: * Enable rtc r7s72100/genmai board * Add Z2 clock for r8a7794 SoC * Add DU clock for r8a7794 SoC * Add power-domains to SDHI for r8a7794 and r7s72100 SoCs * Add reset control properties for r8a774[35] SoCs -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY57Z+AAoJENfPZGlqN0++410QALS78C/4O3vVj3AXABGTnQBc B0cIlfmw1plyx1g0GhZJZYfZ/8bDjdw4yhu7xz0pttWSyfNZpYS7TMf2Uyf6bWtx lMP3N7HYX12y4d/TKmg/w8zNT/P5sBSuAcDwlbRMAKVJer0ztECHmPLawJesF6Vw 2n0VZZpi1A9n4riJukigbiFkRPNjmQAIDB3Rx1afXeyVtUVwImvBb3vJoZHaYJ+T MWaUQ4N+ve22HNm6k8UxJqglDxf9GO5k+SXppPwqUsZlHF41nuR5zWOWxUQl5SCQ G2OQGLcR0iXPcuiFbb3DScuVtwXlm8AgZNOEOGssukC7JkwTFvwHJWMXFBt4ZlPS yDFxTcCqyUtI4NbcsLO3eIEddzG+07V5UwWQw82LXktY2/rYn0I2jgcoAPh6zVou gkA68FaMZSp2WYMfd9EdppyrxaLGbSSi/g3BQnV3HJgYjGqwtb7QSRVM2tmeMEnp RTrAnmTYfRPm04FYyBlwmw7YaDiia5MHp4f45B2mWcXBDlYqepvxDHCyj1lX2ySL /QmVPGrQGSWEgbLhB1kKzSpI90zZBJMzNWE7GaYhb5dXZW2SpjkcpzhHxLtB2BLR xIHIlQ+RHiS0fOPFll3/wfvGDoN1H+P6nh1kz0BJFeQ7ph9iNNVnD9QOaXqePKqL rlbJMygQXSAQ6A8lNrS0 =N8Dk -----END PGP SIGNATURE----- Merge tag 'renesas-dt2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.12 Corrections: * Correct clock frequency of X2 DU clock input for r8a7791/koelsch board * Correct Z clock for r8a7792 SoC * Correct parent of SSI[0-9] clocks for r8a779[013] SoCs * Correct ethernet clock parent on r7s72100 SoC * Correct DU clock for r8a7794/silk board Cleanups: * Drop _clk suffix from external CAN clock node name on r8a779[01] SoCs Enhancements: * Enable rtc r7s72100/genmai board * Add Z2 clock for r8a7794 SoC * Add DU clock for r8a7794 SoC * Add power-domains to SDHI for r8a7794 and r7s72100 SoCs * Add reset control properties for r8a774[35] SoCs * tag 'renesas-dt2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits) ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name ARM: dts: r8a7790: Drop _clk suffix from external CAN clock node name ARM: dts: genmai: Enable rtc and rtc_x1 clock ARM: dts: rskrza1: add rtc DT support ARM: dts: rskrza1: set rtc_x1 clock value ARM: dts: r7s72100: add rtc to device tree ARM: dts: r7s72100: add RTC_X clock inputs to device tree ARM: dts: r7s72100: add rtc clock to device tree ARM: dts: koelsch: Correct clock frequency of X2 DU clock input ARM: dts: r8a7794: Add Z2 clock ARM: dts: r8a7792: Correct Z clock ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks ARM: dts: r7s72100: fix ethernet clock parent ARM: dts: silk: Correct clock of DU1 ARM: dts: alt: Correct clock of DU1 ARM: dts: r8a7794: Correct clock of DU1 ARM: dts: r8a7794: Add DU1 clock to device tree ARM: dts: r7s72100: add power-domains to sdhi ... Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
9ef0f50a23 |
Qualcomm Device Tree Changes for v4.12
* Add Coresight components for MSM8974 * Fixup MSM8974 ADSP XO clk and add RPMCC node * Fix typo in APQ8060 * Add SDCs on MSM8660 * Revert MSM8974 USB gadget change due to issues -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY5tTkAAoJEFKiBbHx2RXVq7AQAMkcalh0NImOfm4uy4alB0ku +3Hr7vkAajQY1MHOqJMdqqSytiycC6TEF8q6ihRuAYK2dWeNARX+FB0Fds+H2ndE IgodHQWqUVKoBa+MTarav6nc9ajb9ToPtbpnhkM36k3eVfGhzLQ2NHd18gpfdEYV RvTA3RZCzHux+anzmJgLcANqEDAfIRjzH4F9hQ1gzPPqiNXTReJYeGXk1eMro76X cx49w0R4jQEgo4pstmYHkJ7wCL0XLz8swNZFlQx1f5qBd010IPW8zeX38rmuRF9M zf54Va57gi8mD+SU+6mGs3OMtgztDDjvtwbef45dweOLxNZYMdh221UJz2/MIt8n mF8Lc4M+SLgy9DbwmOcFtOtYKIZv7/19stH2Yv9/nVMkRYNaQLIgXfK9liTgesj2 65JAFiQGPnA66KLAqJbHeMp3iEAUVeGCigZHNMYq0eYxX0lrQRF+7LYokVtEcJhu L1zbBNJHuuhCdL4eVnheD3j3jab9IdEfEdxG4RlsBuVwT0bIYSslL6mwZIKwnuTS PFbO8t9u/bLyujrbxnqO/aHsGH0AA6yUosb77HHRpkyZZo/nMRtM3eNpaX5n4WAV CSbQzRp2IHTLU+QBCaVQvZc+xi4e0veXG7EkYRi3D/+QH7fG8Ix7jxGNJpsAZtol me85BP13RaJ2dakcRpKj =N6rc -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm Device Tree Changes for v4.12 * Add Coresight components for MSM8974 * Fixup MSM8974 ADSP XO clk and add RPMCC node * Fix typo in APQ8060 * Add SDCs on MSM8660 * Revert MSM8974 USB gadget change due to issues * tag 'qcom-dts-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: Revert "ARM: dts: qcom: msm8974: Add USB gadget nodes" ARM: dts: qcom: msm8974: Add RPMCC DT node ARM: dts: fix typo on APQ8060 Dragonboard ARM: dts: add SDC2 and SDC4 to the MSM8660 family ARM: dts: msm8974: Hook up adsp-pil's xo clock ARM: dts: qcom: Add msm8974 CoreSight components Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
63466c49cb |
ZTE driver updates for 4.12:
It includes a couple of small cleanups on zx296718 power domain drivers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJY65viAAoJEFBXWFqHsHzOkqAH/ig7pVmp3s0H/4xmY3fKOpk2 R2FGXNSWSLyKt+jkQfTKfsQZmaGadefg6KUzXLuBdE306LZkZssmjLqBEv3LBGYE oC+q29Y8S/qb3g1c+B2fMPO1MSfQWRGKgaKUOdDiFw7lBCBplsv2gzntW8aSSpi1 eNraNzpmaesSVUNPrO4uTwRNmvn9mx00k5H2OJWSnyMtFQzo+FDbpj1ULgMfLeLl j6Jnszsp98STkB3Kzc9XGwO8OlHlsr/nnVvJVWJGiyFhwVTncGwLe9gL3ZqFxRYr SjE4Z28xkHcajQBmYmA0SkNHdtERjKxzjYQo9nYP7/rI3kL5r12+iWU7Q29B0ck= =JWPf -----END PGP SIGNATURE----- Merge tag 'zte-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers ZTE driver updates for 4.12: It includes a couple of small cleanups on zx296718 power domain drivers. * tag 'zte-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: zte: pm_domains: Remove .owner field for driver soc: zte: pm_domains: Remove redundant dev_err call in zx2967_pd_probe() Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
912c9fbe66 |
i.MX drivers updates for 4.12:
- A series from Lucas Stach which partly rewrites the imx gpc driver
to support multiple power domains, and moves the related code from
imx platform into drivers folder.
- A series from Dong Aisheng which fixes the issues with Lucas' code
changes and improves things.
- Add workaround for i.MX6QP hardware erratum ERR009619 that is PRE
clocks may be stalled during the power up sequencing of the PU power
domain.
- Add imx-gpcv2 driver to support power domains managed by GPCv2 IP
block found on i.MX7 series of SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY6zd4AAoJEFBXWFqHsHzODtoH/jwTFRhAhfKG2wfplkP+U4HT
gijXHDybebRGll2voGAL7YX7GPhLcy0NSGdiK/ckTtHlvR4E2uxcwaIwzXIE1CTb
MXfv7p+3FXhjcqgbvl122hnLAMWOYjcbH3tFzBy1jlpGp9oEmHx4OtpdlgyD5GJ7
+En6aDtbU0g8aJg9ldZfO8iSAJz1CAqpap+FRjpcPX4xXflOQwQfxJNWuDeg75k6
U3zB2r+lbmjIfohUHWAnHsU2Jf4WPrBrjVsj/1YsiE5rMNPfxAEPYSQJAumG7JtO
qTPWf3qJnSyrWBscPRR3Fs//11IgXZXSCWBPBZjng0ELFS3Rkdvp87etjZraSjU=
=Sypm
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers updates for 4.12:
- A series from Lucas Stach which partly rewrites the imx gpc driver
to support multiple power domains, and moves the related code from
imx platform into drivers folder.
- A series from Dong Aisheng which fixes the issues with Lucas' code
changes and improves things.
- Add workaround for i.MX6QP hardware erratum ERR009619 that is PRE
clocks may be stalled during the power up sequencing of the PU power
domain.
- Add imx-gpcv2 driver to support power domains managed by GPCv2 IP
block found on i.MX7 series of SoCs.
* tag 'imx-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
soc: imx: gpc: add defines for domain index
soc: imx: Add GPCv2 power gating driver
dt-bindings: Add GPCv2 power gating driver
soc: imx: gpc: remove unnecessary readable_reg callback
dt-bindings: imx-gpc: correct the DOMAIN_INDEX using
soc: imx: gpc: keep PGC_X_CTRL name align with reference manual
soc: imx: gpc: fix comment when power up domain
soc: imx: gpc: fix imx6sl gpc power domain regression
soc: imx: gpc: fix domain_index sanity check issue
soc: imx: gpc: fix the wrong using of regmap cache
soc: imx: gpc: fix gpc clk get error handling
soc: imx: move PGC handling to a new GPC driver
dt-bindings: add multidomain support to i.MX GPC DT binding
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
|
7b020654e5 |
This moves the ICST helper library from arch/arm to drivers/clk
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJY52LfAAoJEEEQszewGV1zXCsP/A3A+ZdgJ5Y8A5sN58v1F8mN cEPjDj3pvA+YGtIk3EGFhKGqeREMYV+9m2VENdDlM2hKt7PYZ9js4VguKw/SWcvK vEf1UaTAACjtX3hsBU09oNBBKcju5Mz1Kd6aC7p9WktE4lEHqq0S3j98psvGZmlP H1mW5tC0eF3KHHiIPe30rCniWnAubWacos/y34t+e/bYm942OwmpjwOpli2TNok5 oIDi3c+84X3yL1gZ37z3UAxgPRDgQ1sZf04H4QUoeuHyKGu+olgeKK5uvsclFBS2 FrtL78IS9IqP4bIc67i+pj9/Idw18KWnXwdNDDajEKWlHcmqGPkpjRD2AyAvGw6K 3VNH+mpYlIEIuA+MZowVfXuIXr5iG3NkBKBndpcl4Pu8H/hNBFw3bb4J6IK8Jmbh VhZVgUXDaOb/3qBWV8h5nVzi5dSMchCnMO0xuCTgzZIs6IEHr6XGk2oq50vBevkN skJpRp9fHkdSOiG2r7PW8UoDjULxEq+1REg9p7urJsbgkAaGAozuaXJRq8+smHsy Vv4QczFWi9/ygEvbYJ5ZhpzLz3Wo30vKsWCfm9+9D97fHQPwAhywf61O4tWJBLwp 7Xm+ozOmbd5KQ+PdN+j0vz3IXccxD9Zs67j12TgxO9gzzz1VvNdTPywDOzDawmeI 2oHs7RnHy9LDhNW3HNQy =012f -----END PGP SIGNATURE----- Merge tag 'arm-to-clk-icst' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/drivers This moves the ICST helper library from arch/arm to drivers/clk * tag 'arm-to-clk-icst' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM/clk: move the ICST library to drivers/clk ARM: plat-versatile: remove stale clock header Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
5397b5c45c |
Qualcomm ARM Based Driver Updates for v4.12
* Add SCM APIs for restore_sec_cfg and iommu secure page table -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY5tb5AAoJEFKiBbHx2RXV3ngP/jRA6pEiWKcjYEVuwLM/RtxS SkY5baf9wm/OO4h/3fqEOzuIufQYmh5lj3FvbpPLNKHIjDQXVzm1tnKttxgU7jNB 3dhqo/UAVMT8jdWrMEb+1vbLC1a8Dcv/N01KGmj/WBUOa73VwNjRXr5kaCJyh36Z qdpu6duCxE708zDY/ckTVHjEf1bumhEw6mpJqmbCo/ZFSP8O7AbSagxbtk24mss2 WJjarZ6qDlbQoDb6oRcAZZVJG6+bB9H+7B+JRmGdRe9vuGyP8aaEHlajWj+VuN1o RcuH4fjj4cCmhTF/6ONDVHD1JiUZFr9tidsYtgnWxesbftZcYC5nyPjp7YFRIckA 4HITlqkulbIoBUMocaj1gLuAWz7YzVckUvVrOk7PXZitw1i8VgeE9DSAMxX12QX6 w0feXdHz/SRm7Xa0JZ+nYd9kWd3sSDzB5cS0xwA2kvvcgUYfasQNeWe9xVOx4+nC B7fzY+yywSp3IWadEhDjxmjJxgo5+H5tiknHlA6NRSb0+t0683fCkVqV8n6VQUIn JOHtRgeA8LKscGGWdnTn9DUZ0zHO52pq6n6H+njmKKePhZRRKVfoVIKS2dTPIX/s xfEwUgKKgaHOYhFI6AXV0V/GBnWEYgu2KEnHWpqgaurw1OyjOY1jjosIFOiJDmJj /8RiIzKG01xJFY2UvzCX =Ms8b -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Qualcomm ARM Based Driver Updates for v4.12 * Add SCM APIs for restore_sec_cfg and iommu secure page table * tag 'qcom-drivers-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: firmware: qcom_scm: add two scm calls for iommu secure page table firmware/qcom: add qcom_scm_restore_sec_cfg() Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
43ba9236b4 |
Defconfig updates for omaps for v4.12 merge window. Mostly
to update to use new ti-cpufreq driver, the rest is just to enable drivers found on various devices: - Update to use ti-cpufreq driver that we now have - Enable SATA for ti81xx as a loadable module - Enable Ethernet PHY for DP83848 - Enable modem related modules for PPP, QMI and USB ACM as loadable modules - Enable droid 4 related drivers as lodable modules except for PMIC and regulator so eMMC can be used for root -----BEGIN PGP SIGNATURE----- iQJEBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAljrt8gRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXPp6g/2MhQ+ho4WZeborGINGhvKLV9feIGLyd1s Dgt8Ex1ilRBh79t1W3c+tWAk0VcP//LuRi0ZIE5DAby9QoSB54WYJLMAI8uhsvIh vke753kZYeZx/eycsV/lI0cM9HRkQsCOecVjsYNtc1/sM2rfWvE3ajA+b6EzHbRX RR2Zp/OZDOuL+T7B1agc9N1bPEKg7ZRVavOtS8IyZFo+/wt/ffJp5Fg+Ebarc+zr xqzXzdKvFTCZ+u+HWudZmPzp+2t0y2OEcbXbZO5bB8fOQsxqb6B7/7utfYhPN6W2 eQQCN4D1Gfu9egeAv/iQi5eCFvqFs9kngDx+HXAe4ZB6Ai4BEAP0ph6QHBgE87UR 8iv9r29h6FIqGoUw+Ua8tQjMDgmUC6fUD32V7PUuqBHzE2q0whRPfEZrjGzEtApj Upsi+NNudlctFA4h1v4CBN1Weykc2dSlYZJTJfN7tTa4fwk37nMaDZSdH56iWeLD DY5/GSooUnGh4y1OvFsFOL+ZsW/Y+GB1eebf6VfmypthuX6Fe4J5nd731dywyZ4d QatVTC9RYnN0HDR+imOLMm0OMGKz70t1fYkZjhTmBRPd/imNxoRlrtx11Wdz8Hey XgHD+YnvAZrhBf32nutxuufu+fUvKaUMMDHQzx4RTDtxSXO+QvkvbqeBBCCfXuWh s/BNNIfZuQ== =4IRe -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig Defconfig updates for omaps for v4.12 merge window. Mostly to update to use new ti-cpufreq driver, the rest is just to enable drivers found on various devices: - Update to use ti-cpufreq driver that we now have - Enable SATA for ti81xx as a loadable module - Enable Ethernet PHY for DP83848 - Enable modem related modules for PPP, QMI and USB ACM as loadable modules - Enable droid 4 related drivers as lodable modules except for PMIC and regulator so eMMC can be used for root * tag 'omap-for-v4.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Enable droid 4 devices ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules ARM: omap2plus_defconfig: Enable TI Ethernet PHY ARM: omap2plus_defconfig: enable ahci-dm816 module ARM: omap2plus_defconfig: Enable support for ti-cpufreq Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
b0d40760da |
i.MX defconfig updates for 4.12:
- Enable MAX11801 and HID_MULTITOUCH touch drivers.
- Enable SMSC_PHY driver, as imx6sl-evk board has a LAN8720A ethernet
phy supported by it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEbBAABAgAGBQJY65FXAAoJEFBXWFqHsHzOyfYH9A3tKXcNwIUJhzfpLI9FTi4h
1w3j1dJO0hzj8Apd+7o7bJWXLDsNGAs0We8sYeZWjeyOol2wMt6Lc4LrSrn9lQhp
LlLzEKeqiX4UI+Az6YCv5AG8XefCUtb3w5zK2nQkC8w3Ge4fs1l7X9mJCMpRYtPQ
D3rqcksRKoAAVXmaO3d1MHNi2lycVUVdxHW/z7S68oeL6gqEAXC07op9in4TJCaY
zwIvXxuLta1GQszwPGUFRXIb70OhLbJ48433gUZDLLuItlgFAmIEAn9nzFXN3q3p
dpuEeYKSD0IeJZqIkLzaBZ3OCm4/gNrbsduSzmihZSm9W03mJAOoqgnqQBbfTA==
=5aru
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig updates for 4.12:
- Enable MAX11801 and HID_MULTITOUCH touch drivers.
- Enable SMSC_PHY driver, as imx6sl-evk board has a LAN8720A ethernet
phy supported by it.
* tag 'imx-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select SMSC_PHY
ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
|
cbc54d67bf |
Samsung defconfig ARM update for v4.12:
1. Enable DYNAMIC_DEBUG because it is useful for debugging. 2. Increase CMA memory region to allow handling H.264 1080p videos. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY6OzmAAoJEME3ZuaGi4PXUgIQAJsHVe6PQpRkSumBxhHf12ex GhCNkERibshTLKo/qpEtKR3hYsUpITD6UxJ9izuAkM8oyFL0RMG54WECL7ZYQNAo JnNZJV7Vy4v0gVPI7LtA2KetR8aDcVJN0qUn9FrLAVyiX1rfZ/8w/1+Z7D9HhKSj IIThGIxP5lHZnGla9vCU4h5HCn2DXbm94PHidLluSpY8zQ41dgSGQ4mEEkzZGbSX KLvzXB6KJU/54nb4GLXqOQjrqTwjt9iFp55dZ/zZIm8gatxNf+Hh2pJ64ksYIpFI oN2+INKE2EsK2TSoxUHMbiCR2xjCIMmqa2botrmgRKKvp52b97/8L8U8Dn3oL+R0 GAhIBINCCP2WKeoBEgqTK+8ChshEDYe0EYJDxUFHBEoheENpEEyjuvuPDLve1p9D oLbFVLilA2MzYjPTqrl5tMjrjII6Fgs7lNPRSSalGKZYIiFlLndQ1EL7D6f+feCn 7MOhgEe3HcjLnMgNJv/0QAgRdw8yFoGAFj9tq81EMMaFEngGNU5Nvaw3YcNyzRyK ZTTe14XIOMzhFsbVFKkkSXD7gWLOkwZXRtWKhkeDcezd1CXUqtL6gMnKL2TzAjJI q4zKe3OX55TQlUt/AYB39x2vTxDqbz+PmXSKuo9WjqvfR2UvCELuZHYfZm3at05Z nDU1cav4C7F2kr3ixcZG =ScYV -----END PGP SIGNATURE----- Merge tag 'samsung-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig Samsung defconfig ARM update for v4.12: 1. Enable DYNAMIC_DEBUG because it is useful for debugging. 2. Increase CMA memory region to allow handling H.264 1080p videos. * tag 'samsung-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96 ARM: exynos_defconfig: Enable DYNAMIC_DEBUG and get rid of old ext3 Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
d0815dfd91 |
mvebu dt64 for 4.12 (part 2)
- crypto engine description for the Armada 7k/8k SoCs and the boards using it - SDHCI description for the Armada 37xx and 7k/8k SoCs and the boards using it -----BEGIN PGP SIGNATURE----- iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWO+ljCMcZ3JlZ29yeS5j bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71Q9dAJ4i+PBERM8X wh0AI0kekOBF33L4YQCcDr5wYXQdCYgwnTBVYadOHvce61A= =zSnq -----END PGP SIGNATURE----- Merge tag 'mvebu-dt64-4.12-2' of git://git.infradead.org/linux-mvebu into next/dt64 mvebu dt64 for 4.12 (part 2) - crypto engine description for the Armada 7k/8k SoCs and the boards using it - SDHCI description for the Armada 37xx and 7k/8k SoCs and the boards using it * tag 'mvebu-dt64-4.12-2' of git://git.infradead.org/linux-mvebu: arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB arm64: marvell: dts: add crypto engine description for 7k/8k arm64: dts: marvell: add sdhci support for Armada 7K/8K arm64: dts: marvell: add eMMC support for Armada 37xx Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
08fd8c9567 |
ARM64: DT: Hisilicon SoC DT updates for 4.12
- Reset the hi6220 mmc hosts to avoid hang - Add the binding for the hi3798cv200 SoC and the poplar board - Add basic dts files to support the hi3798cv200 poplar board - Enable the Mbigen, XGE, RoCE and SAS for the hip07 d05 board - Add driver strength MACRO for the hi3660 SoC - Add the pinctrl dtsi file for hikey960 board to configure the pins -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY66cBAAoJEAvIV27ZiWZcSAAP/3qvcWDNVwc7Rg5JIcbvBP09 mBbcutrHmFVi5Swd3yuTyNErRFliVsdDV3dwanxlXOojqYgE4WpJQFKtXr8obQUa q3yk+gzMIS3+P18dJPU+SFsCwLDaUF4PkiRm3vd4Oc6fgPfqCbWfYcS6jOhbBdzD GWAMp6j/vn3Br3RSFe2NgH43kv2H4efEh0lrKj3wk2mCDF3s69PaMGPLgCfeV1F0 pYwyO/2v4TWuJkO8U7g1XyvK6LRO49mWDKdqhP0hZpr3DJP7T5u9E4bxScBwG2GY ENURvZpl3Kd1thfR9+7FkwNg0Z7Y9hVNI5763JzLusd6pw1y2jDU9oEESpuVi1FH 9dwqloiLuonYSPvAM9XS84CXnguFoqjndf7Z3d9yliS86GRn4g5B5t20rlLtSE+4 o+IcLQy6z6CpDHugTzav3oBsscckEiWsmX0X6Jym23+buzFcHWOPOQldIUUSDDoq 9oct1AxBrQA9F9KspaiWRy38Bwi8qRT5FT+BfBai3y45FeEKdRFUghIwdeqm4F2v 1JulIiPelHUtELAcAEJFRVQzgfSVuGuXCAHVHpgXE018UnNvhfl3/VtUtvLI71wf jukY2JIJsG9r/NHR1uZU8LGN70bNUjHXwuF0R/zh2zwZT+mDgxEe5zOlCbQyYJbt uqVy7+asSKcbOLabW/Ae =5zO6 -----END PGP SIGNATURE----- Merge tag 'hisi-arm64-dt-for-4.12' of git://github.com/hisilicon/linux-hisi into next/dt64 ARM64: DT: Hisilicon SoC DT updates for 4.12 - Reset the hi6220 mmc hosts to avoid hang - Add the binding for the hi3798cv200 SoC and the poplar board - Add basic dts files to support the hi3798cv200 poplar board - Enable the Mbigen, XGE, RoCE and SAS for the hip07 d05 board - Add driver strength MACRO for the hi3660 SoC - Add the pinctrl dtsi file for hikey960 board to configure the pins * tag 'hisi-arm64-dt-for-4.12' of git://github.com/hisilicon/linux-hisi: arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board arm64: dts: hisi: add SAS nodes for the hip07 SoC arm64: dts: hisi: add RoCE nodes for the hip07 SoC arm64: dts: hisi: add network related nodes for the hip07 SoC arm64: dts: hisi: add mbigen nodes for the hip07 SoC arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board arm64: dts: hi6220: Reset the mmc hosts Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
b42f45558e |
ZTE arm64 device tree updates for 4.12:
- Add mmc devices for ZX296718 SoC and enable those available on
zx296718-evb board.
- Add VOU controller device, output devices HDMI and TVENC, and enable
display support for zx296718-evb board.
- Remove pll_vga clock from ZX296718 device tree, as it's not a fixed
rate clock.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY66HJAAoJEFBXWFqHsHzOUREH/RADjsUVP/5Jb1Dqs9FghOzK
DxIsFEc6TaeeDEzBA8p2jnd4xUi0vBSuJJw77QS/tYLt0eB+ermqw5MFYHknMyOY
OeDUx15fnC0n9WSkC4IFqlGXCnBuibcxjILSLwzsZ4jdVnvZtJ0nFAEckOpqeRDj
N9byLnK8fDZhlMP1A/opZhL51WKRSL/ImkqguoC5+Mm+/Lq2OuTtQukobfVHlTjc
lePX5uTPAujXoA9olHn0oliTPA/BDV9+ZWId4tqBSYxdJ06w0KqRiCk8xW04d1qF
BXEVOv4jo5HdTDa0ikUBcvvn0vD4RqZR6Wo/1I88nHY4mNJKF4ibqlMguL1mueA=
=d5as
-----END PGP SIGNATURE-----
Merge tag 'zte-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
ZTE arm64 device tree updates for 4.12:
- Add mmc devices for ZX296718 SoC and enable those available on
zx296718-evb board.
- Add VOU controller device, output devices HDMI and TVENC, and enable
display support for zx296718-evb board.
- Remove pll_vga clock from ZX296718 device tree, as it's not a fixed
rate clock.
* tag 'zte-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: zte: add tvenc device for zx296718
arm64: dts: zte: add vou and hdmi devices for zx296718
arm64: dts: zte: add mmc devices for zx296718
arm64: dts: zte: remove zx296718 pll_vga clock
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
|
13ed63b6cb |
Freescale arm64 device tree updates for 4.12:
- Add support of LS2088A SoC, which is a derivative of existing
LS2080A SoC, and the major difference is on ARM cores.
- Add support of LS1088A SoC which includes eight Cortex-A53 cores
with 32 KB L1 D-cache and I-cache respectively.
- Add crypto and thermal device support for LS1012A platform.
- Add ECC register region for SATA device on LS1012A, LS1043A and
LS1046A platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY649rAAoJEFBXWFqHsHzO3O4H/Ry5BxyUsrIziFCMNv05chEw
/C5AJVGGHyZTc2q/nGeR+wkDXhB7p7xX9D4Fzl+lAss58J20yB403dbrc5r2cmPk
aataxt1q4wfH9KekGlEqkolkQrMPRb7i+j36xpjVUCeFww8C8rszFC3CJwcTLFX8
pdhykfIpKz/Osy1hWH4Nt9Ss3L+8DhmQGh1bueriggQ5f/MPkhZUk7goK4j8mlC+
i5oWcO6wWvTXg1HTW+PbtBFJWqQ7ztb0qHSikoJ8yWtIkzehlcgrO7qkdf8hI8pV
gj48OMrvS4b/aYsAKmfVGCDpNqedoJDVbPRXkES8/z1avkKUmGLnhr9Ftdw7saA=
=BYDv
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Freescale arm64 device tree updates for 4.12:
- Add support of LS2088A SoC, which is a derivative of existing
LS2080A SoC, and the major difference is on ARM cores.
- Add support of LS1088A SoC which includes eight Cortex-A53 cores
with 32 KB L1 D-cache and I-cache respectively.
- Add crypto and thermal device support for LS1012A platform.
- Add ECC register region for SATA device on LS1012A, LS1043A and
LS1046A platforms.
* tag 'imx-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add entry for FSL LS1088A RDB, QDS boards
dt-bindings: clockgen: Add compatible string for LS1088A
arm64: dts: Add support for FSL's LS1088A SoC
arm64: dts: ls1012a: add crypto node
arm64: dts: ls1012a: add thermal monitor node
arm64: dts: updated sata node on ls1012a platform
arm64: dts: added ecc register address to sata node on ls1046a
arm64: dts: added ecc register address to sata node on ls1043a
arm64: dts: freescale: ls2088a: Add DTS support for FSL's LS2088A SoC
arm64: dts: freescale: ls2080a: Split devicetree for code resuability
dt-bindings: Add compatible for LS2088A QDS and RDB board
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
|
ab719074fa |
Basic support for new rk3328, a 4-core Cortex-A53 soc and a fix for the
default memory definition on the px5 eval board. While the bootloader should already override it with the actual amount, it's better to not carry around wrong values. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAljpQgUQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgSriCACyesU9O1mz0CHWArxHY1O4UJ8SYdZqotOv Q8XVWA7H9wrLMazyauHDGxZ63PbSMuhkOzpbUwBl6BEgUtVtr2j0c8JgvLk7IAqS 07ggX/7cYoqCLB8CKqkgdGKYjWIVwkGm0zL7lBwtlF6WnTl92B+gHEll8sv8R7ua EO1Biq+o/XZrmsBoBBWtnaJdZYAcIMEU3qRtI4mInvOHkDCEvW0kaKuPT9A2h75j 7Asgpn0Na3sqX3UPAk5F1+YCEV40aZ10qPV1HurKL1E61HepDWs3rjymyXh0H12q B9yzOGPfxdoU21rCAu1HtMu4ujo5ppvKRajeE4nyag92TTuP2lu4 =tcTl -----END PGP SIGNATURE----- Merge tag 'v4.12-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64 Basic support for new rk3328, a 4-core Cortex-A53 soc and a fix for the default memory definition on the px5 eval board. While the bootloader should already override it with the actual amount, it's better to not carry around wrong values. * tag 'v4.12-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: fix the memory size of PX5 Evaluation board arm64: dts: rockchip: add RK3328 eavluation board devicetree dt-bindings: document rockchip rk3328-evb board arm64: dts: rockchip: add core dtsi file for RK3328 SoCs dt-bindings: add binding for rk3328-grf Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
eeef69c9eb |
Samsung DeviceTree ARM64 update for v4.12:
1. Add IR, touchscreen and panel to TM2/TM2E boards. 2. Add proper clock frequency properties to DSI nodes. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY6OyZAAoJEME3ZuaGi4PXMTUP/RErX9qqM49S4ygyFqgMcDy7 i7Zbkgxl9MfNOzzRLRUD9POsI7VjdCvOks1AWV6RMw1TOKHEjF/ChRsFoZBaneZu UKSybe50sB+Xqok4Wo1RN+FRo9tVaOtOlPdQguR1f9salR40/eg6XC4tTdbsjzSE m74+pnUdZuGTvXwkwrdXShKYgk0Z5fsBlM3QhOnG1XXfs+A/1yzpxDuDapB4WU/K s+z2dQ7VtA5SaoAhpAwuejdlu41W7NkYVSp3Ejoc4eZiIqPQuzv7djb0uT6K+SPh Wmq4m2UQX3UWU48aDHdFoEeS03mX0ILNZAuDOiW2ZrAmXUVIXwh94VVjp0j3pNGB fda1mRGk85jZBBenAi0BIhqVYmK1oBRTpOHQpgriGM6SOcJMUhLCeQBcL6fJ+/hu x1kI6+6bgC5s5lPeYGk/k+XFF6No1pbc6g4UAG/BlWQ8A9g5Uu5ZsvY9cIxHxEtx 2AAXWJ7uLpztxuAryENRVHiiMY7w+FJBXuNbtSW9TYQx3lsVjmEsyiDHaMIVy6V8 r/cuKPtcj0/pDNY1lg4N0DpjPZpISx66viFIzfM5Fg6fiLRtNurzuUCbDj75Xckl Nx9vrxpgBFfwU4q++HItB2n8HykewusCC3TCs8YNOeHs1yRUvhlEwVswGqtNoKuc 5uGMtR4P0EqhwmU4AMXd =kk6u -----END PGP SIGNATURE----- Merge tag 'samsung-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64 Samsung DeviceTree ARM64 update for v4.12: 1. Add IR, touchscreen and panel to TM2/TM2E boards. 2. Add proper clock frequency properties to DSI nodes. * tag 'samsung-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add the burst and esc clock frequency properties to DSI node arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board arm64: dts: exynos: Add stmfts touchscreen node for TM2 and TM2E arm64: dts: exynos: Enable ir-spi in the TM2 and TM2E boards Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
c3acc32d6f |
Second Round of Renesas ARM64 Based SoC DT Updates for v4.12
Corrections: * r8a7795: Correct SATA device size to 2MiB for r8a7795 SoC Cleanup: * Drop _clk suffix from X12 clock node name for r8a7795 SoC Enhancements: * Add reset control properties for r8a779[56] -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY569jAAoJENfPZGlqN0++4kIP/isnugtJf5N1dRc82mxIDd3e 8wAKOI3+gXK6dQPr5HP6nD7YgUWWgj+SKX8G8d/VRxWkBHKVdOBmSq6h/nkY2hg6 XcnbRu+dIB2fthXW4vdvnj1j5gIz1b0Y8aXL5cZSX+5nxeZPfdiZt0n7YSKU2Bg5 wlHXUWhkXYDZfz9wqRmqU2mjkbh5dwqHHYMLcrwazVhvS68XdJvAwUKzrtCfndKv n727ypPZP5QX569r4Ub1AtY3J3y4F4aMl7eWbh8ZxTJoMYrtLhmq7gms1thmTp77 xVeHFHCDEThREY7NgubisI9oyVEssqkB/8cDbCo6IPvDNNuJ1M5FAfAHNcBQ+2Wg 3PiKDoVXkBL7zuQIl0JjiWPEBKWZkEnictXX+1CsgHZPLnQFAKncYilpvX3jz+Gq 2eETERdgNbx5pEej/mZsyLVFe6TQ5GoSz74YQQkS4KajfIGZmYAgUXL0sIlo3MKi X1jhQy4Ux41nG+arJPYyx8R+Db9qrDhs43npfe+y5i9D/JbIxASDE4J0RypU993x H6SEUMDoEG+1dcR4Ez7rCeWm8CG9eVDks0oMZlRaOXbqvPBsy43YvuiYdTEE3x+X HSJubtalb1pDqe4Fi0DmuOU/2kQf74/mBmD971sjBNupT61e4Q3rW8bwz5pO+45Y lgLStN9v8ptgyMr+hU4o =HWqJ -----END PGP SIGNATURE----- Merge tag 'renesas-arm64-dt2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64 Second Round of Renesas ARM64 Based SoC DT Updates for v4.12 Corrections: * r8a7795: Correct SATA device size to 2MiB for r8a7795 SoC Cleanup: * Drop _clk suffix from X12 clock node name for r8a7795 SoC Enhancements: * Add reset control properties for r8a779[56] * tag 'renesas-arm64-dt2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: r8a7795: salvator-x: Drop _clk suffix from X12 clock node name arm64: dts: r8a7796: Add reset control properties arm64: dts: r8a7795: Add reset control properties arm64: dts: r8a7795: Correct SATA device size to 2MiB Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
f6b71673e1 |
Qualcomm ARM64 Updates for v4.12
* Fixup MSM8996 SMP2P and add ADSP PIL / SLPI SMP2P node * Replace PMU compatible w/ A53 specific one * Add APQ8016 ramoops * Update MSM8916 hexagon node * Add PM8994 RTC -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY5tYFAAoJEFKiBbHx2RXVmmcP/12qDv1XsywbDo0ib3Elnjbe lRRBG1WCK8II+ludg9eXgeADkzYlCWJ3lPxux95BHvwFpDmd1I6gD7E6a8d6NBRs FOmyf9+3QHGEI8jUqr/1oNDXQRhEj7UiHtN4Hrr3kZIjE7sjsfKr+ZvCXly38IIE vQTN3KdwnOSZm/KgyU13BdtphFfogRxtxzbiBKGN3sMRqHtfRndnqDOxWrpOYTZM IQjxf0xZdHhDOXGRgXNHa7ljdQ/gmhBYOdYBaj6KJV+pgWiF2i/zaxt8tejPXoxV +jl2uIF3iWjVDL7fg71q0wdoQ9p3mCXA0zcvB+rvFGWawDanh+Rgv5PqyYNv96gH 6C6LBajKGDxBn72HJ/GjcxpZldLhz2x9gdG0IPVVgRLha2Sj49RQn5tjTKEzF7AW zkYBU+2LUmIe4Ns1PfFeDqtE0k+kyKvUoQhH6cHUt5ePmtVErJpRog52BRxdbRtd Xke3DYXjVdrS097qMmISxC6O1BDFMEhc18+exaFOhcuDhBxze7vx72b2n9K6Dcl9 HuA3TmGH8RsFcB8rXhumHbgc3vtZ7ohIuRLMnFx5WoDIb+w8j2Q1qe5XuIFicxYF nr4+/bDKwmWwjqvoAm5cCTaCQFxUrisj39sCPWXihMaTUcIC7Vc5BO0TOiqyKdUo QrTpACwrFYStYzBbFHzj =3+wW -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64 Qualcomm ARM64 Updates for v4.12 * Fixup MSM8996 SMP2P and add ADSP PIL / SLPI SMP2P node * Replace PMU compatible w/ A53 specific one * Add APQ8016 ramoops * Update MSM8916 hexagon node * Add PM8994 RTC * tag 'qcom-arm64-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: msm8996: Add ADSP PIL node arm64: dts: qcom: pm8994: Add rtc node arm64: dts: apq8016-sbc: Add ramoops arm64: dts: qcom: msm8916: Update hexagon node arm64: dts: msm8996: Add SLPI SMP2P dt node. arm64: dts: qcom: Replace PMU compatible with a53 specific one arm64: dts: qcom: msm8996: Fixup smp2p node Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
3d3949df4e |
arm64: tegra: Device tree changes for v4.12-rc1
This adds a bunch of features for Tegra186, such as PMC, ethernet, I2C, SDHCI and GPIO. It also enables various features on the P2771 devkit. A small fix is made to the compatible string list for the flow controller on Tegra132 and the IOMMU is enabled for host1x on Tegra210. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAljmyEETHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zof6+D/4q3/aatnXbrQ+nYvcXdSYq+ISOaCEA Ll23ePKJvTiPGE1+rIy64NyljAdiSFhul6PCFumCaX39J7QoOgY5AE3DvOgx/xEh RhAqRxlq04rYqTqlNovwgbV0XI8TDYAnuelGrRp6f6gC8J2EqReFIWG9P+11MYcD Zim6Xzyl42v0u//3oy/JOhE0iEK1/Mv35Wv8VTxHFsh+TMhhm2M+vAFDgFeVv6q0 863ooxrw935FbAR6LRm6cIiyF1EknQ5z7LgDnJVHFke/nAggcItldkgRqijA4C8c ctJTvigOIZmhoCfF6Jh5fAuPCqhxsvZAoC5h8kWKmqw7tDS4Aysaf8cZDo034yrO y6HC632iqP3UvNj5WMTExBC4FFwHx6wp/ESdYsxih00F0/hOPsObeorUiQ2DJkjc 0XMWKEXuBWzyRYYFSY1zgs9rq0nmqlX/TL6+Lrz1FPzgMWXFvt9B2cCnssDGa7U6 uzKezAbU8eTg5muawYnStttJROdxbHBaDbRNVkvbtYUV2mYfmfAqVD5RjrssYerD cLoIU0jgjZa0wk1D0JUX6quT0rvRpmGo013G6Luk01D1jG2udTkNXIexyBtndJmr ZEuzfRLAAdDo7OpirgcWxpja4m/17Dp/LnLg1tzksHk3UxnrFD83Hrtpgif+ci8x +t8oScJqGFhgiQ== =yRy3 -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.12-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64 arm64: tegra: Device tree changes for v4.12-rc1 This adds a bunch of features for Tegra186, such as PMC, ethernet, I2C, SDHCI and GPIO. It also enables various features on the P2771 devkit. A small fix is made to the compatible string list for the flow controller on Tegra132 and the IOMMU is enabled for host1x on Tegra210. * tag 'tegra-for-4.12-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Update the Tegra132 flowctrl compatible string arm64: tegra: Add GPU node for Tegra186 arm64: tegra: Enable IOMMU for host1x on Tegra210 arm64: tegra: Enable VIC on Tegra210 arm64: tegra: Add GPIO expanders on P2771 arm64: tegra: Add power monitors on P2771 arm64: tegra: Add GPIO keys on P2771 arm64: tegra: Enable current monitors on P3310 arm64: tegra: Enable SD/MMC slot on P2771 arm64: tegra: Enable SDHCI controllers on P3110 arm64: tegra: Add initial power tree for P3310 arm64: tegra: Enable ethernet on P3310 arm64: tegra: Enable I2C controllers on P3310 arm64: tegra: Invert the PMC interrupt on P3310 arm64: tegra: Add ethernet support for Tegra186 arm64: tegra: Add PMC controller on Tegra186 Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
e1851247a0 |
dt-bindings: Updates for v4.12-rc1
This contains an update for the flow controller device tree binding as well as the addition of the binding for the GP10B GPU found on the new Tegra186 (Parker) SoC. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAljmxg4THHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoYy6D/41zgWP+rlYO03xHdQ9g/tJgpKWtGmg U0hiAxycHiFuSnHv8cOHihEPHzR55hAQPTbr9lAM/gcXjUHVAQ0pPRm50Iu5Q0if M3QSRhZPSqP54pibNDrsd8Pz75gWTNEvc971IqBPkCiqTmte7T0w9Zlw1x5Ol6vV WT8fu7HAliysjpiEKAglrgcmYDAJ+vLI6ybTj6ZxcyXTQN7jexIXEeOMVIpIGRYN oAVqSWHlUYJO/wIZzpVOTh2mvlVw+EIMeNnIoOZmGhBH2EPGWAwto0adags0c7ws WsfIWFOv1zg4BeNer/BevWnMREJrco2uOWyIF8RITcG2n+nKuKTcnGTtWr+MO77D 5iNImLHZOcZKk9lOHofaEvdN55sGtoUEriQC1gQa5LpFL6nawTs9erEQS3QT3xVn Z0+boaa5h7wxQVxLie0CjSqLnzl1rF/+HVx/Gg995zHUKld04mNqhtkwcCxqptIO 1M0Y6qjGZkYPRXM7Wqz/D9tPSfGZXLLVi0zh5rn8B4rLEygc8SVEXpEtOlJAW5NP 1UomYh2oBXkigGLDJAljgoNk4ZPCOP25JtHFgULIKIpgVUQVPYpPyCVtnQa+2il8 7vrpez3omPj49yBFEjtynYq7vCjeTyxQ1K+5pjX9LVv9rU8YyrwE7tzjo4jve9vy gJmnB5AQ73/HTw== =EArG -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.12-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt dt-bindings: Updates for v4.12-rc1 This contains an update for the flow controller device tree binding as well as the addition of the binding for the GP10B GPU found on the new Tegra186 (Parker) SoC. * tag 'tegra-for-4.12-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: Add documentation for GP10B GPU dt-bindings: tegra: Update compatible strings for Tegra flowctrl Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
286d3ac582 |
Qualcomm ARM Based defconfig Updates for v4.12
* Enable QCOM remoteproc and related drivers -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY5tgAAAoJEFKiBbHx2RXVGloP/1Vx72WxIvYBoF2jkP5cEdqn PJXS5Gsd8x3K9acf0Rnf8Q2Z29Qd0HK7zNmiIcTpNgIK6fnaSxVcJ4DOUMt3D01+ N30IPRKMXq3vVQwibFlFS6Lap6T1brNqPC3kL4PA1jzS5CVcs2LvjCfWr4K8KdJR bNxZURa3wxsZ9Km/bELv1bkIAwX/JYWZ6nkulTp7oF3C3+Q4d8V+KpaX2/hJ9ej+ sdlDjL2+LgRN+V5cE3eTX2Qud/sf4QZj9v5RH2oY7Qy2fmmK1oad1wL/QoxUmKYZ JmQNoukCD2c/7rukjWq1/ijYCLIptxkKuRWjFxVRBFQ7jefvem9BCDhuoARj/H+N J655f9yxfSRLTJ4nzrn/YbBJBfrNkFtMqdVNkcLVXsqiQ5sWlsjX9/QRz2BVB4i+ 4paMaP5ilBleI+v4oQcN+9adG439vgz2639jYhgoVFWrAzZ9LnsW9NDD5Os3arUa GIeJSEkrDJOocb5hvuTm+8nmaoQSo/p5FnRM4v/t9AXi7ntx0BztIvBXJ8SYS7Ve lgxf+KVgH98Iyi+wteRcl/AA/oP53HPEXJkkzDSh9LardXZrTr2MgTaZIV5mtTEH QJP0O692wGo7/MZnqfidR7VZAAO7SjOgk0UUO9WyCaM6sYtF377J78Ptmxjy4k2V kAYSct6bEY+6dSfP2oBh =Ma84 -----END PGP SIGNATURE----- Merge tag 'qcom-defconfig-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig Qualcomm ARM Based defconfig Updates for v4.12 * Enable QCOM remoteproc and related drivers * tag 'qcom-defconfig-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
55de807595 |
soc/tegra: Core SoC changes for v4.12-rc1
This contains PMC support for Tegra186 as well as a proper driver for the flow controller found on SoCs up to Tegra210. This also turns the fuse driver into an explicitly non-modular driver. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAljmx1ITHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoWt2D/9hNQqNgxW+6QOq3EuxWHDPs6hWOHRy v13TM7cQg7Qc6zXnmc+SzEp5eT7+GbNNgtrQ7ukfzKPeDwbPXf+NwsprS+STayvF dxqtcem/6tID3WJxzYJRJY3d8hH3BCvQhJf+uF8V2za1F/f4f6mHDtUboPVO2LIa L4IdtXQEwoVyPdnH2GDdKG6uOHnufBLVsS+DFXWeuY/nPiTgFcBQAgOuNwFZK1/V FisKON2QIg0yh6Y7UjDGh5X9ODR2OC+9g1kGV7hY3tlvz/JovZxc8CPnQsPg2QR7 1heGwNTHEOkAeClvRdAr+guV1wDvY4vA+2U1XeQeSLg3gq4lIfRKp8+xrwfnkyS+ rmllTA/85LCiTO9slKoSdv6vSSgb7K549z/dYdIqwDTPU0GE1xzFF4DTvs2OwmtF y4ziCDM+6H1EgesZDcVZikVFjof+q8h2j1FEsloe6HjmhcJ42lQWRLFbEPk1XMec cWNynVMjRxaQP/8cJTHYpnpa6e6/Eqv1GhWYWl+9yqodJhBJtrzPZLaGKfYiaG2R QcG48WsBGDtV5zYKUEG5/LKNWaFvcAjhfi9JXh44FMBlBNZ+EyWThJPTvL06glk4 SKaBx69Ft5fOHlIQG9/lT+u0RmLmmMkSNHeW/Zh9s08xeJhK3lHLnpT8s6kDxui5 Nhid59CnZh8SnQ== =n4aM -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers soc/tegra: Core SoC changes for v4.12-rc1 This contains PMC support for Tegra186 as well as a proper driver for the flow controller found on SoCs up to Tegra210. This also turns the fuse driver into an explicitly non-modular driver. * tag 'tegra-for-4.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: Add initial flowctrl support for Tegra132/210 soc/tegra: flowctrl: Add basic platform driver soc/tegra: Move Tegra flowctrl driver ARM: tegra: Remove unnecessary inclusion of flowctrl header soc: tegra: make fuse-tegra explicitly non-modular soc/tegra: Fix link errors with PMC disabled soc/tegra: Implement Tegra186 PMC support Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
c58ab5376a |
ARM: tegra: Maintainer changes for v4.12-rc1
Stephen has been focussing on other areas of the open source community within NVIDIA, but Jon has been helping out with the kernel development for a while now. Replace Stephen's entry with one from Jon. Secondly, Alex has unfortunately left the company and therefore won't be serving as a Tegra maintainer any longer. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAljmxtYTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoSydD/9eNAMFxy0oXmESTI9QCtnY3idd15zK +HrRQ5LpPbb5bcafzNtsShXATLDgIUiY2AkW9Ckw2bkeOFqWJRcUql5McR/gh4Q3 m0lIyrO3oH8TDrnJopIdUupjM/4RYdk1208lclxtlbZIvMAZJ1jXXX1033EUuSt7 X//lbuAqgYiw8JwWU3tV9NovDD9lea7Eukyx0il/VVihdzrfHVqQD6CDrofx7Dgx 0FlOax0X1qItSKiqky/8ewq9ljOciXwuTIt5aWaqihFXRCKZG/+rFSSuNtev9U2V 6I0pBieakxFdXbD10/UpWAtICkOCzjOhbp0IUWIQfr84+rmiXf8dN8OLJcz0W2k3 JKY+XWfwlLaweE9TzwPXgASbYYTAkZGdiVLrXF1uLHM5VOStoySIlOYBauamANvr o8G/idexBOWuy+uigu4qX/3POc6a71GIS9kzYW4a/bXJxMS7MC/Jzzgsqk0+RBRn IhBG55BjsNSNqPoKkb6PNqssbKHmd1L/x/7Lkk/KezDuPcLz/vKEUXeNRuTQ1JbW 4XYE64voUXiAduSpRsOY2r7K/o1BNhALZz4tCHarYCFGU1u/y+KqSYr8QZCBF/5P TeDXnS5AfDwLMRqEUksfSQPzHfAzrTJZz9IYXazOTo5FznVWxApd4iAy3HKvEWtX Xg/4Ny9ATiSFXw== =xkMB -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.12-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/fixes-non-critical ARM: tegra: Maintainer changes for v4.12-rc1 Stephen has been focussing on other areas of the open source community within NVIDIA, but Jon has been helping out with the kernel development for a while now. Replace Stephen's entry with one from Jon. Secondly, Alex has unfortunately left the company and therefore won't be serving as a Tegra maintainer any longer. * tag 'tegra-for-4.12-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: MAINTAINERS: tegra: Remove self as maintainer MAINTAINERS: tegra: Replace Stephen with Jon Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
fe8fee6901 |
ARM SOC PM domain support for 4.12
Dave Gerlach (5):
PM / Domains: Add generic data pointer to genpd data struct
PM / Domains: Do not check if simple providers have phandle cells
dt-bindings: Add TI SCI PM Domains
soc: ti: Add ti_sci_pm_domains driver
ARM: keystone: Drop PM domain support for k2g
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ayBe
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-pmdomain' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers
ARM SOC PM domain support for 4.12
Dave Gerlach (5):
PM / Domains: Add generic data pointer to genpd data struct
PM / Domains: Do not check if simple providers have phandle cells
dt-bindings: Add TI SCI PM Domains
soc: ti: Add ti_sci_pm_domains driver
ARM: keystone: Drop PM domain support for k2g
* tag 'arm-soc-pmdomain' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: keystone: Drop PM domain support for k2g
soc: ti: Add ti_sci_pm_domains driver
dt-bindings: Add TI SCI PM Domains
PM / Domains: Do not check if simple providers have phandle cells
PM / Domains: Add generic data pointer to genpd data struct
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
|
916a491d11 |
drm/i915: Avoid format string expansion from engine names
While highly unlikely, this makes sure that the string built from engine names won't be processed as a format string. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170411045630.GA6612@beast |
||
|
|
9b70ae4951 |
PCI: Include PCI-to-PCIe bridges as "Downstream Ports"
A PCI/PCI-X to PCI Express bridge, sometimes referred to as a "reverse bridge", is a bridge with conventional PCI or PCI-X on its primary side and a PCI Express Port on its secondary (downstream) side. That PCIe Port is a Downstream Port and could be connected to a slot, just like a Root Port or a Switch Downstream Port. Make pcie_downstream_port() return true for them, so we can access the Slot registers in the PCIe capability. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
|
2149ed8d6f |
Allwinner H5 DT changes for 4.12
H5 patches for 4.12, which are mostly related to reworking the H3 DTSI to be usable on the arm64 H5 DTSI, that shares almost everything with the H3 but the CPU cores. We then have patches to support the H5 boards on top. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY5guIAAoJEBx+YmzsjxAgCOAP/izjrX7AD/lxwAQ1BtfIuNcK rSpQ4TjF7hO1r0pN1XoIs538U5uYWiBPhpoL+bxu9cdv33i1jojM6MFMAGfyWES4 bjEHU/dI6zBGeJ/icwSEjP1Wl6N+h6eZwzJ01VQsdc91RZXXqgT2xCVXGIJDtuTw H/+iwvpF6ZqyTFXzhhx8YH7Aqn0X9+nuy6WALyr7d4awa7uLw0QL54Lr3gJWaGvm Si/o8SjZU6pLF3KyDlcOwlDem+YD6ghH+eZXa1323xoctPQRuFZTiinnolhxJWFc w+yhK6PtfR8CJ/WlfEEtMjjYQxeefr6MCQjaPjrY67YwE61PlcOZADAB77DujZ/2 Na47Olqp7vJ1yg19X5W/GlxfWa9P0H0VuRE8ZPMfZXGIHFBTgjHuE+pGds38IDvd Zr0z/fX9WjTUDK9qFD9JHDL9FAJo7gjNGMMMiUvEjR8xpTJhhmAeAzpgZj+Aa78f ZOYzu8J1xYf2yT/Xj/lDz7FHcWJEc89go9fX+lc8ILaFcXYvokqjfGnD6+ODf0FW sO54p1OhjEt8yIEnH2js9C+YCIsuMeZ6e6fHjfp/uVVLPb94fhXKSQGYKRmXPJkK gEdd2OS+I+diM0BAd2mKRlr57mEoPtkl07yx2E2eqCjIG/8wBN0C76KM9p0yPWof YAaV+iAHOdsvT43alrXp =ilmt -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-h5-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner H5 DT changes for 4.12 H5 patches for 4.12, which are mostly related to reworking the H3 DTSI to be usable on the arm64 H5 DTSI, that shares almost everything with the H3 but the CPU cores. We then have patches to support the H5 boards on top. * tag 'sunxi-dt-h5-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: sunxi: h3/h5: switch apb0-related clocks to r_ccu arm64: allwinner: h5: enable USB OTG on Orange Pi PC 2 board arm64: allwinner: h5: add support for the Orange Pi PC 2 board arm64: allwinner: h5: add Allwinner H5 .dtsi ARM: sunxi: h3/h5: add usb_otg and OHCI/EHCI for usbc0 on H3/H5 arm: sun8i: h3: split Allwinner H3 .dtsi arm: sun8i: h3: correct the GIC compatible in H3 to gic-400 arm: sun8i: h3: drop pinctrl-a10.h inclusion for H3 DTSI arm: sun8i: h3: drop skeleton.dtsi inclusion in H3 DTSI Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
a9465b581d |
Allwinner H3 DT changes for 4.12
H3 patches for 4.12, which are mostly related to reworking the H3 DTSI to be usable on the arm64 H5 DTSI, that shares almost everything with the H3 but the CPU cores. We also have some new device addition (USB, mostly) that would conflict otherwise. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY5gm5AAoJEBx+YmzsjxAg3R0QAISn8cFytu1xYAdVRsIz+xsU 4B1X9XFpGj0W9gWCco+6+LHwRyKSAsnGZ1djGNvvbsPiHIUCOHh7BArPBncRcV+B Whiuzbt0zhAjFdHGK9LiiouxpsvfSC5oa2o4erN19+PSbDUCL+zdz8KHs8Zi/Cn5 sJWY6TZocRprSf4oxrsXFbG6Wt0gtO9/tyrqFs5prY5ZEGxcEAC/0XiMBem7UBx/ dqGkM7kPzd9qNq9YjTikjoeDQh+kJn0aNj8IKmb6ubS+XLcRCNQL2vuPaygr6+RA JBn2QXiBCwwqADmhwboBBuBqDtAQAKOVKxXW6qsb4sw6BQMTCqsRrbvYIOnw0L4v wWfikT8E5zEO0g1163Mo2Tt2OtmfUp5mF1T+xktiz8RWm9XV3bHMXpk2v337ZaBY 5m5gUoHj2GJdl6uinsOBLB0RNM5b0Ijp4OEPKIEALOflBWQgbZSRqpKr8dx9Ik5x FAyP9xle8VMP2cVXwAqVC3IfnnbI25fuW+nOuSmt5a1f49vWVC2X0VAPivGHxgYH hJ+kZnzQJliAP1/xeHfIndvQ86fYykJ3uZMPxJsb5AbZalxNMhqUe1h2OeTwaChU CnNzgfAZA0Yha3le6IdPqjZJsfBOaLflha3Ie6sftymgYyhDXLm/QrUU2Fu4W1yj dfslnt3VEfTHZGSb6F0L =zcf9 -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-h3-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner H3 DT changes for 4.12 H3 patches for 4.12, which are mostly related to reworking the H3 DTSI to be usable on the arm64 H5 DTSI, that shares almost everything with the H3 but the CPU cores. We also have some new device addition (USB, mostly) that would conflict otherwise. * tag 'sunxi-dt-h3-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: sun8i: h2+: enable USB OTG for Orange Pi Zero board ARM: sun8i: h3: enable USB OTG on Orange Pi One ARM: sunxi: h3/h5: add usb_otg and OHCI/EHCI for usbc0 on H3/H5 arm: sun8i: h3: split Allwinner H3 .dtsi arm: sun8i: h3: correct the GIC compatible in H3 to gic-400 arm: sun8i: h3: drop pinctrl-a10.h inclusion for H3 DTSI arm: sun8i: h3: drop skeleton.dtsi inclusion in H3 DTSI Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
6929f0f6a4 |
Allwinner arm64 DT changes for 4.12
Some patches to enable the PRCM block in the A64 -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY5gSTAAoJEBx+YmzsjxAguFkQAJkdxquuse8N15nl3E4zbnNs SbuJt7eVluQgOs1EZUFxKCFfui0I90jzq0C5QDrmkld/+bF5aRU8YrQLetZc/xwg TovxA2NtpgHlXv32/PKQsMNqSx1mFQuZgLlN+O7yL4q1E6mH2qZCHj/xOz40rrBi kb3dRKGxJdRt9Hc5l2Sysy8kkQXnGDcn8lA4DuQvTvxDp/TanOKV86VdtMEw6LYR 4TKqnveXgDe48+5a8RdycgevX35HyULTSMJYIlmWXPtc6YtlL1VgzevGMUCcnGt4 EocPwh08ot+x2aQXOBVYgstMFG3RhdPq1VeYfZj32LXFDNCXvDXq0/iYE5u0UozM m3njtzaQg5FH961NoXbghPwgdsvl2KBR3pjNHMA0LhCDepfIC3I+lDE74o+93kcK DyKaA8k48pP1VS+K/vJkYwPuMGkJmfhgOrMRKV2ABFKczy6fCX6K5Hcbv2s7csPA /o7EmG5oLKTBc1cfH3EXSi9uqJB533dxWh0xlahZE0m9h0bjHvCdzwEKqVGHUGJ2 Jz+tSMHNN89v11u6HnzCTJkAXXG5pRTP5khkh6JlI1+E3sOdF0rR0H77fsxjCKXt 2E4i5jUy92fFU0Gd/Jcbfa6T4wYKzFeAaaNd4DjsvvBDeFUU7933VNWd92buc8A7 im9JN0pRe+faD28BuJw9 =5XFn -----END PGP SIGNATURE----- Merge tag 'sunxi-dt64-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner arm64 DT changes for 4.12 Some patches to enable the PRCM block in the A64 * tag 'sunxi-dt64-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: add R_PIO pinctrl node arm64: allwinner: a64: add r_ccu node Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
ec4c22e7c3 |
Allwinner DT changes for 4.12
As usual a number of changes, among which:
- All the sun5i DTSI has been reworked based on the new documentation and
the IPs that are actually found in all those SoCs. Part of that rework
also brought the GR8 DTSI to include sun5i.dtsi
- Mali devfreq and thermal throttling support on the A33
- AC power supplies for the AXP209 and AXP22X PMIC
- CAN support for the A20
- CPUFreq-based thermal throttling for the A33
- New board: NanoPi NEO Air
-----BEGIN PGP SIGNATURE-----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=m9vZ
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.12
As usual a number of changes, among which:
- All the sun5i DTSI has been reworked based on the new documentation and
the IPs that are actually found in all those SoCs. Part of that rework
also brought the GR8 DTSI to include sun5i.dtsi
- Mali devfreq and thermal throttling support on the A33
- AC power supplies for the AXP209 and AXP22X PMIC
- CAN support for the A20
- CPUFreq-based thermal throttling for the A33
- New board: NanoPi NEO Air
* tag 'sunxi-dt-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (38 commits)
ARM: sun8i: sina33: add highest OPP of CPUs
ARM: sun8i: a33: Add devfreq-based GPU cooling
ARM: sun8i: a33: add CPU thermal throttling
ARM: sun8i: a33: add thermal sensor
ARM: dts: sun7i: fix device node ordering
ARM: dts: sun4i: fix device node ordering
ARM: dts: sun7i: Add can0_pins_a pinctrl settings
ARM: dts: sun7i: Add CAN node
ARM: dts: sun4i: Add can0_pins_a pinctrl settings
ARM: dts: sun4i: Add CAN node
ARM: sun7i: cubietruck: enable ACIN und USB power supply subnode
ARM: dts: sun5i: Add interrupt for display backend
dt-bindings: display: sun4i: Add display backend interrupt to device tree binding
ARM: dts: sun7i: Use axp209.dtsi on A20-OLinuXino-Micro
ARM: dts: sun6i: sina31s: Enable SPDIF out
ARM: sun8i: sina33: add cpu-supply
ARM: sun8i: a33: add all operating points
ARM: sun5i: chip: enable ACIN power supply subnode
ARM: dts: sun8i: sina33: enable ACIN power supply subnode
ARM: dtsi: axp22x: add AC power supply subnode
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|