Commit graph

678,699 commits

Author SHA1 Message Date
Antoine Tenart
ffdc394e1b ARM: dts: alpine: add valid clock-frequency values
Update the Alpine clock-frequency values with valid default values. The
bootloader can still update these values if needed, but at least we can
boot if it does not.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
2017-04-03 09:06:55 +02:00
Antoine Tenart
5254588801 ARM: dts: alpine: add spaces before the uart node units.
Cosmetic cleanup to have consistent node definitions. Add a space before
the node units which do not have one.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
2017-04-03 09:06:53 +02:00
Antoine Tenart
70c4b99a3a ARM: dts: alpine: remove 0x's from the uart1 node unit address
Remove 0x's from the uart1 node unit address to have consistent nodes.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
2017-04-03 09:06:49 +02:00
Takashi Iwai
f87e7f2589 ALSA: hda - Improved position reporting on SKL+
Apply the same methods to obtain the current stream position as ASoC
Intel SKL driver uses.  It reads the position from DPIB for a playback
stream while it still reads from the position buffer for a capture
stream.  For a capture stream, some ugly workaround is needed to
settle down the inconsistent position.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-03 08:43:17 +02:00
Takashi Iwai
70eafad849 ALSA: hda - Move SKL+ vendor specific register definitions to hda_register.h
They may be used by both legacy and ASoC drivers.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-03 08:43:07 +02:00
Takashi Iwai
2c1f81381e ALSA: hda - Avoid tricky macros
The macros _snd_hdac_chip_read() and *_write() expand to different
types (b,w,l) per their argument.  They were thought to be used only
internally for other snd_hdac_chip_*() macros, but in some situations
we need to call these directly, and they are way too ugly.

Instead of saving a few lines, we just write these macros explicitly
with the types, so that they can be used in a saner way.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-03 08:42:43 +02:00
Dave Airlie
320d8c3d38 Merge tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc into drm-next
drm-misc for 4.12:

Core:
- Removed some fb subsampling dimension checks from core (Ville)
- Some MST slot cleanup (Dhinakaran)
- Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel)
- Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts
  (Daniel)
- Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel)
- Cleanups around vblank as well as allowing lockless counter reads (Chris W.)
- VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas)

Drivers:
- Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.)
- Thunderbolt external GPU awareness added (Lukas)

* tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits)
  apple-gmux: Don't switch external DP port on 2011+ MacBook Pros
  drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo
  drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo
  drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo
  PCI: Recognize Thunderbolt devices
  MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo
  drm: Fix locking gotcha in page_flip ioctl
  drm: Clarify the role of plane_state argument to drm_simple update().
  drm: Clear e after kfree in drm_mode_page_flip_ioctl
  drm: Convert cmpxchg(bool) back to a two step operation
  drm/bridge: ti-tfp410: support hpd via gpio
  drm: use .hword to represent 16-bit numbers
  Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl"
  drm: Fixup failure paths in drm_atomic_helper_set_config
  drm: Peek at the current counter/timestamp for vblank queries
  drm: Refactor vblank sequence number comparison
  drm: vblank cannot be enabled if dev->irq_enabled is false
  drm: Mark up accesses of vblank->enabled outside of its spinlock
  drm: Make the decision to keep vblank irq enabled earlier
  drm/atomic-helper: Remove the backoff hack from set_config
  ...
2017-04-03 16:30:24 +10:00
Michael Ellerman
63f44d6514 powerpc/book3s: Print task info if we take a machine check in user mode
For an MCE (Machine Check Exception) that hits while in user mode
MSR(PR=1), print the task info to the console MCE error log. This may
help to identify an application that triggered the MCE.

After this patch the MCE console looks like:

  Severe Machine check interrupt [Recovered]
    NIP: [0000000010039778] PID: 762 Comm: ebizzy
    Initiator: CPU
    Error type: SLB [Multihit]
      Effective address: 0000000010039778

  Severe Machine check interrupt [Not recovered]
    NIP: [0000000010039778] PID: 763 Comm: ebizzy
    Initiator: CPU
    Error type: UE [Page table walk ifetch]
      Effective address: 0000000010039778
  ebizzy[763]: unhandled signal 7 at 0000000010039778 nip 0000000010039778 lr 0000000010001b44 code 30004

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-03 16:12:00 +10:00
Mahesh Salgaonkar
5b1d6fc2d4 powerpc/book3s: Print the kernel function name in machine check
For D-side errors we print the load/store address that caused the
machine check as 'Effective address'. But the instruction that may have
caused the machine check can also be helpful, so in addition to printing
the NIP, also print the kernel function name as well.

After this patch the MCE console log would look like:

  Severe Machine check interrupt [Recovered]
    NIP [d00000001bc70194]: init_module+0x194/0x2b0 [bork_kernel]
    Initiator: CPU
    Error type: SLB [Parity]
      Effective address: d000000026de0000

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-03 16:11:36 +10:00
Yuejie Shi
89e357d83c af_key: Add lock to key dump
A dump may come in the middle of another dump, modifying its dump
structure members. This race condition will result in NULL pointer
dereference in kernel. So add a lock to prevent that race.

Fixes: 83321d6b98 ("[AF_KEY]: Dump SA/SP entries non-atomically")
Signed-off-by: Yuejie Shi <syjcnss@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-03 08:05:17 +02:00
Daniel Vetter
ba515d3407 drm/i915: Update DRIVER_DATE to 20170403
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-04-03 07:52:18 +02:00
Al Viro
a8e2844001 Merge branch 'work.statx' into for-next 2017-04-03 01:06:59 -04:00
Al Viro
2b5efc0897 alpha: fix stack smashing in old_adjtimex(2)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-03 01:06:53 -04:00
David Howells
3209f68b3c statx: Include a mask for stx_attributes in struct statx
Include a mask in struct stat to indicate which bits of stx_attributes the
filesystem actually supports.

This would also be useful if we add another system call that allows you to
do a 'bulk attribute set' and pass in a statx struct with the masks
appropriately set to say what you want to set.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-03 01:06:00 -04:00
David Howells
47071aee6a statx: Reserve the top bit of the mask for future struct expansion
Reserve the top bit of the mask for future expansion of the statx struct
and give an error if statx() sees it set.  All the other bits are ignored
if we see them set but don't support the bit; we just clear the bit in the
returned mask.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-03 01:05:59 -04:00
Darrick J. Wong
5f955f26f3 xfs: report crtime and attribute flags to statx
statx has the ability to report inode creation times and inode flags, so
hook up di_crtime and di_flags to that functionality.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-03 01:05:59 -04:00
David Howells
99652ea56a ext4: Add statx support
Return enhanced file attributes from the Ext4 filesystem.  This includes
the following:

 (1) The inode creation time (i_crtime) as stx_btime, setting STATX_BTIME.

 (2) Certain FS_xxx_FL flags are mapped to stx_attribute flags.

This requires that all ext4 inodes have a getattr call, not just some of
them, so to this end, split the ext4_getattr() function and only call part
of it where appropriate.

Example output:

	[root@andromeda ~]# touch foo
	[root@andromeda ~]# chattr +ai foo
	[root@andromeda ~]# /tmp/test-statx foo
	statx(foo) = 0
	results=fff
	  Size: 0               Blocks: 0          IO Block: 4096    regular file
	Device: 08:12           Inode: 2101950     Links: 1
	Access: (0644/-rw-r--r--)  Uid:     0   Gid:     0
	Access: 2016-02-11 17:08:29.031795451+0000
	Modify: 2016-02-11 17:08:29.031795451+0000
	Change: 2016-02-11 17:11:11.987790114+0000
	 Birth: 2016-02-11 17:08:29.031795451+0000
	Attributes: 0000000000000030 (-------- -------- -------- -------- -------- -------- -------- --ai----)

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-03 01:05:58 -04:00
Eric Biggers
64bd72048a statx: optimize copy of struct statx to userspace
I found that statx() was significantly slower than stat().  As a
microbenchmark, I compared 10,000,000 invocations of fstat() on a tmpfs
file to the same with statx() passed a NULL path:

	$ time ./stat_benchmark

	real	0m1.464s
	user	0m0.275s
	sys	0m1.187s

	$ time ./statx_benchmark

	real	0m5.530s
	user	0m0.281s
	sys	0m5.247s

statx is expected to be a little slower than stat because struct statx
is larger than struct stat, but not by *that* much.  It turns out that
most of the overhead was in copying struct statx to userspace, mostly in
all the stac/clac instructions that got generated for each __put_user()
call.  (This was on x86_64, but some other architectures, e.g. arm64,
have something similar now too.)

stat() instead initializes its struct on the stack and copies it to
userspace with a single call to copy_to_user().  This turns out to be
much faster, and changing statx to do this makes it almost as fast as
stat:

	$ time ./statx_benchmark

	real	0m1.624s
	user	0m0.270s
	sys	0m1.354s

For zeroing the reserved fields, start by zeroing the full struct with
memset.  This makes it clear that every byte copied to userspace is
initialized, even implicit padding bytes (though there are none
currently).  In the scenarios I tested, it also performed the same as a
designated initializer.  Manually initializing each field was still
slightly faster, but would have been more error-prone and less
verifiable.

Also rename statx_set_result() to cp_statx() for consistency with
cp_old_stat() et al., and make it noinline so that struct statx doesn't
add to the stack usage during the main portion of the syscall execution.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-03 01:05:57 -04:00
Eric Biggers
b15fb70b82 statx: remove incorrect part of vfs_statx() comment
request_mask and query_flags are function arguments, not passed in
struct kstat.  So remove the part of the comment which claims otherwise.
This was apparently left over from an earlier version of the statx
patch.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-03 01:05:57 -04:00
Eric Biggers
8c7493aa3e statx: reject unknown flags when using NULL path
The statx() system call currently accepts unknown flags when called with
a NULL path to operate on a file descriptor.  Left unchanged, this could
make it hard to introduce new query flags in the future, since
applications may not be able to tell whether a given flag is supported.

Fix this by failing the system call with EINVAL if any flags other than
KSTAT_QUERY_FLAGS are specified in combination with a NULL path.

Arguably, we could still permit known lookup-related flags such as
AT_SYMLINK_NOFOLLOW.  However, that would be inconsistent with how
sys_utimensat() behaves when passed a NULL path, which seems to be the
closest precedent.  And given that the NULL path case is (I believe)
mainly intended to be used to implement a wrapper function like fstatx()
that doesn't have a path argument, I think rejecting lookup-related
flags too is probably the best choice.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-03 01:05:56 -04:00
Eric Biggers
75dd7e4bb6 Documentation/filesystems: fix documentation for ->getattr()
Following the recent merge of statx, correct the documented prototype
for the ->getattr() inode operation, and add an entry to the porting
file.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-03 01:05:56 -04:00
Peter Senna Tschudin
a68ee76f4a drm/bridge: megachips-stdpxxxx-ge-b850v3-fw: Fix bridge initialization
Reordering of the device nodes based on unit address resulted in
ge_b850v3_lvds_attach() being called before
ge_b850v3_lvds_ptr->stdp4028_i2c was populated.

This patch moves the drm bridge initialization from
ge_b850v3_lvds_init() to stdp4028_ge_b850v3_fw_probe() ensuring that
ge_b850v3_lvds_ptr->stdp4028_i2c is properly populated.

Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330081928.8537-1-peter.senna@collabora.com
2017-04-03 09:58:05 +05:30
Tobias Klauser
921d701e6f nios2: reserve boot memory for device tree
Make sure to reserve the boot memory for the flattened device tree.
Otherwise it might get overwritten, e.g. when initial_boot_params is
copied, leading to a corrupted FDT and a boot hang/crash:

  bootconsole [early0] enabled
  Early console on uart16650 initialized at 0xf8001600
  OF: fdt: Error -11 processing FDT
  Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!

  ---[ end Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!

Guenter Roeck says:

> I think I found the problem. In unflatten_and_copy_device_tree(), with added
> debug information:
>
> OF: fdt: initial_boot_params=c861e400, dt=c861f000 size=28874 (0x70ca)
>
> ... and then initial_boot_params is copied to dt, which results in corrupted
> fdt since the memory overlaps. Looks like the initial_boot_params memory
> is not reserved and (re-)allocated by early_init_dt_alloc_memory_arch().

Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reference: http://lkml.kernel.org/r/20170226210338.GA19476@roeck-us.net
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-04-02 20:13:57 -07:00
Grygorii Strashko
75514b6654 net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeout
In case, if TX watchdog is fired some or all netdev TX queues will be
stopped and as part of recovery it is required not only to drain and
reinitailize CPSW TX channeles, but also wake up stoppted TX queues what
doesn't happen now and netdevice will stop transmiting data until
reopenned.

Hence, add netif_tx_wake_all_queues() call in .ndo_tx_timeout() to complete
recovery and restore TX path.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02 19:42:44 -07:00
David S. Miller
d4f4b91582 Merge branch 'rds-minor-bug-fixes'
Sowmini Varadhan says:

====================
rds: tcp: couple of minor bug fixes

A couple of minor bugfixes that showed up during testing
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02 19:41:01 -07:00
Sowmini Varadhan
087d975353 rds: tcp: canonical connection order for all paths with index > 0
The rds_connect_worker() has a bug in the check that enforces the
canonical connection order described in the comments of
rds_tcp_state_change(). The intention is to make sure that all
the multipath connections are always initiated by the smaller IP
address via rds_start_mprds. To achieve this, rds_connection_worker
should check that cp_index > 0.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02 19:41:00 -07:00
Sowmini Varadhan
e97656d03c rds: tcp: allow progress of rds_conn_shutdown if the rds_connection is marked ERROR by an intervening FIN
rds_conn_shutdown() runs in workq context, and marks the rds_connection
as DISCONNECTING before quiescing Tx/Rx paths. However, after all I/O
has quiesced, we may still find the rds_connection state to be
RDS_CONN_ERROR if an intervening FIN was processed in softirq context.

This is not a fatal error: rds_conn_shutdown() should continue the
shutdown, and there is no need to log noisy messages about this event.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02 19:41:00 -07:00
Eric Dumazet
d3fbff306c sock: correctly test SOCK_TIMESTAMP in sock_recv_ts_and_drops()
It seems the code does not match the intent.

This broke packetdrill, and probably other programs.

Fixes: 6c7c98bad4 ("sock: avoid dirtying sk_stamp, if possible")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02 19:34:55 -07:00
Andrew Morton
e270e96686 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: fix build with gcc-4.4.4
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_set_rxfh':
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: error: unknown field 'rss' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: missing braces around initializer
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: (near initialization for 'rrp.<anonymous>')
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1068: error: unknown field 'rss' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: excess elements in struct initializer
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: (near initialization for 'rrp')

gcc-4.4.4 has issues with anonymous union initializers.  Work around this.

Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02 19:32:57 -07:00
Andrew Morton
956327913c drivers/net/ethernet/mellanox/mlx5/core/en_main.c: fix build with gcc-4.4.4
drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts':
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2210: error: unknown field 'rqn' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2211: warning: missing braces around initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2211: warning: (near initialization for 'direct_rrp.<anonymous>')
drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts_to_channels':
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: error: unknown field 'rss' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: missing braces around initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: (near initialization for 'rrp.<anonymous>')
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: initialization makes integer from pointer without a cast
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2228: error: unknown field 'rss' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2229: warning: excess elements in struct initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2229: warning: (near initialization for 'rrp')
drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts_to_drop':
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2238: error: unknown field 'rqn' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2239: warning: missing braces around initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2239: warning: (near initialization for 'drop_rrp.<anonymous>')

gcc-4.4.4 has issues with anonymous union initializers.  Work around this.

Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02 19:32:57 -07:00
Joao Pinto
44781fef13 net: stmmac: fix cbs configuration
Sending again, because forgot to include net-dev.

The QoS IP does not accept AVB capabilities to default/queue 0, this way we
guarantee 75% bandwidth for AVB. This patch assures that only queues >= 1
gets CBS confgured. Additional info was also added to stmmac.txt.

Reported-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02 19:30:06 -07:00
Elena Reshetova
ddb99e118e security, keys: convert key_user.usage from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-04-03 10:49:06 +10:00
Elena Reshetova
fff292914d security, keys: convert key.usage from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-04-03 10:49:05 +10:00
Linus Torvalds
a71c9a1c77 Linux 4.11-rc5 v4.11-rc5 2017-04-02 17:23:54 -07:00
Linus Torvalds
f49237bfcd dmaengine fixes for 4.11-rc5
Couple of minor fixes for 4.11
  - array bound fix for __get_unmap_pool()
  - cyclic period splitting for bcm2835
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJY4L1bAAoJEHwUBw8lI4NHoI4P/j+t5ZiMd9LgBaEWrkQRJd0j
 RiTD2ub93XRaMGCCTG9mpKy6QJ18T2Hma8e73sW6+kxG0KPP7JldvK395cO9pTgb
 R0CktSA72HPlUyy+OSg5OeB9T3pdcOfwv/RuD1g4TfEyknGVTWXKd4u/v5Lupn/y
 UTWIhsd/0VlIIIEKlaoelG0UsK92rqAc3dnjdVzx102XuZZYBStZxP7j7Jnuep4y
 O4BNLq64/og5X8VvSGjvzkzV83X+JFxPLk1sVrcmChzttOjKWRZkTssiR6DH5qni
 pz7WI3fxDFgJJwLSejAfhHo+wOwaezytymlVmfViAfDQLgDG8hrt/if1meBffrg6
 VpumHcgKiDfPanji1fauC2DK9QFZZ0NuT0DXsL07csVFbqRndFp3qIhDGHy00z4k
 r2MrFiGcuA5LEQotha3VKD0Z5HjeOOUKCj9hacZAuCXNUohX8KX6Yietc7oEIWco
 WCodC6vQ3yICPI4bS9dUIkJRkI1qJoB5f5cVcl9NaMybXza/mvyeI7yIOWgoRBvf
 O0bh1j8sxeyYyfsJ8DZ+NI3uBKm5+iMb6VsVWrso+O8+0sH3f+s8wZkemMDWCBMv
 V1kx5ZVKJ+7qw4OLOm6tlom8WGdvYQAQjYoLT0Zh9yXc5CQUfpwk4tZ0WOnsoVIi
 vIJGh6uu3S1rXOTeGXJR
 =bNTJ
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-fix-4.11-rc5' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
 "A couple of minor fixes for 4.11:

   - array bound fix for __get_unmap_pool()

   - cyclic period splitting for bcm2835"

* tag 'dmaengine-fix-4.11-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
  dmaengine: bcm2835: Fix cyclic DMA period splitting
2017-04-02 16:29:34 -07:00
Xiubo Li
a5d68ba858 tcmu: Skip Data-Out blocks before gathering Data-In buffer for BIDI case
For the bidirectional case, the Data-Out buffer blocks will always at
the head of the tcmu_cmd's bitmap, and before gathering the Data-In
buffer, first of all it should skip the Data-Out ones, or the device
supporting BIDI commands won't work.

Fixed: 26418649ee ("target/user: Introduce data_bitmap, replace
		data_length/data_head/data_tail")
Reported-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Tested-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Cc: stable@vger.kernel.org # 4.6+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-04-02 16:18:51 -07:00
Jonathan Corbet
f504d47be5 docs: Convert unshare.txt to RST and add to the user-space API manual
This is a straightforward conversion, without any real textual changes.
Since this document has seen no substantive changes since its addition in
2006, some such changes are probably warranted.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 15:18:32 -06:00
Jonathan Corbet
1d596dee38 docs: Create a user-space API guide
This is meant to be the place for documentation relevant to application
developers.  It's empty for the moment, but at least we have a place now!

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 15:16:58 -06:00
Nicholas Bellinger
1c99de981f iscsi-target: Drop work-around for legacy GlobalSAN initiator
Once upon a time back in 2009, a work-around was added to support
the GlobalSAN iSCSI initiator v3.3 for MacOSX, which during login
did not propose nor respond to MaxBurstLength, FirstBurstLength,
DefaultTime2Wait and DefaultTime2Retain keys.

The work-around in iscsi_check_proposer_for_optional_reply()
allowed the missing keys to be proposed, but did not require
waiting for a response before moving to full feature phase
operation.  This allowed GlobalSAN v3.3 to work out-of-the
box, and for many years we didn't run into login interopt
issues with any other initiators..

Until recently, when Martin tried a QLogic 57840S iSCSI Offload
HBA on Windows 2016 which completed login, but subsequently
failed with:

    Got unknown iSCSI OpCode: 0x43

The issue was QLogic MSFT side did not propose DefaultTime2Wait +
DefaultTime2Retain, so LIO proposes them itself, and immediately
transitions to full feature phase because of the GlobalSAN hack.
However, the QLogic MSFT side still attempts to respond to
DefaultTime2Retain + DefaultTime2Wait, even though LIO has set
ISCSI_FLAG_LOGIN_NEXT_STAGE3 + ISCSI_FLAG_LOGIN_TRANSIT
in last login response.

So while the QLogic MSFT side should have been proposing these
two keys to start, it was doing the correct thing per RFC-3720
attempting to respond to proposed keys before transitioning to
full feature phase.

All that said, recent versions of GlobalSAN iSCSI (v5.3.0.541)
does correctly propose the four keys during login, making the
original work-around moot.

So in order to allow QLogic MSFT to run unmodified as-is, go
ahead and drop this long standing work-around.

Reported-by: Martin Svec <martin.svec@zoner.cz>
Cc: Martin Svec <martin.svec@zoner.cz>
Cc: Himanshu Madhani <Himanshu.Madhani@cavium.com>
Cc: Arun Easi <arun.easi@cavium.com>
Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-04-02 14:10:16 -07:00
mchehab@s-opensource.com
0e056eb553 kernel-api.rst: fix a series of errors when parsing C files
./lib/string.c:134: WARNING: Inline emphasis start-string without end-string.
./mm/filemap.c:522: WARNING: Inline interpreted text or phrase reference start-string without end-string.
./mm/filemap.c:1283: ERROR: Unexpected indentation.
./mm/filemap.c:3003: WARNING: Inline interpreted text or phrase reference start-string without end-string.
./mm/vmalloc.c:1544: WARNING: Inline emphasis start-string without end-string.
./mm/page_alloc.c:4245: ERROR: Unexpected indentation.
./ipc/util.c:676: ERROR: Unexpected indentation.
./drivers/pci/irq.c:35: WARNING: Block quote ends without a blank line; unexpected unindent.
./security/security.c:109: ERROR: Unexpected indentation.
./security/security.c:110: WARNING: Definition list ends without a blank line; unexpected unindent.
./block/genhd.c:275: WARNING: Inline strong start-string without end-string.
./block/genhd.c:283: WARNING: Inline strong start-string without end-string.
./include/linux/clk.h:134: WARNING: Inline emphasis start-string without end-string.
./include/linux/clk.h:134: WARNING: Inline emphasis start-string without end-string.
./ipc/util.c:477: ERROR: Unknown target name: "s".

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 14:31:49 -06:00
mchehab@s-opensource.com
40bf19a8d9 kernel-api.rst: fix some complex tags at lib/bitmap.c
Fix the following issues:

./lib/bitmap.c:869: WARNING: Definition list ends without a blank line; unexpected unindent.
./lib/bitmap.c:876: WARNING: Inline emphasis start-string without end-string.
./lib/bitmap.c:508: ERROR: Unexpected indentation.

And make sure that a table and a footnote will use the right tags.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 14:29:33 -06:00
mchehab@s-opensource.com
6cc89134c0 kernel-api.rst: fix output of the vsnprintf() documentation
The vsnprintf() kernel-doc comment uses % character with a special
meaning other than escaping a constant. As ReST already defines
``literal`` as an escape sequence, let's make kernel-doc handle it,
and use it at lib/vsprintf.c.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 14:29:19 -06:00
Mauro Carvalho Chehab
c7e2c0643d docs-rst: core_api: move driver-specific stuff to drivers_api
There are several stuff there that are actually driver-specific.

Move those to the driver_api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 14:17:43 -06:00
Mauro Carvalho Chehab
61c8830bc1 kernel-api.rst: make it handle lib/crc32.c
This file has only "internal" functions:
	./lib/crc32.c:1: warning: no structured comments found

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 14:14:15 -06:00
Mauro Carvalho Chehab
baca8a0c99 kernel-api.tmpl: convert it to ReST
Brainless conversion of genericirq.tmpl book to ReST, via
	Documentation/sphinx/tmplcvt

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 14:13:27 -06:00
Mauro Carvalho Chehab
76d40fae13 genericirq.rst: add cross-reference links and use monospaced fonts
The document describes several functions that are documented
there via kernel doc macros. Add cross-references to them.

In order to be consistend with other documents, use monospaced
fonts for fields.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 14:11:27 -06:00
Mauro Carvalho Chehab
3bd3b99ab6 genericirq.tmpl: convert it to ReST
Brainless conversion of genericirq.tmpl book to ReST, via
	Documentation/sphinx/tmplcvt

Copyright information inserted manually.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 14:10:50 -06:00
Mauro Carvalho Chehab
f9b5c5304c scripts/kernel-doc: fix handling of parameters with parenthesis
lib/crc32c defines one parameter as:
	const u32 (*tab)[256]

Better handle parenthesis, to avoid those warnings:

./lib/crc32.c:149: warning: No description found for parameter 'tab)[256]'
./lib/crc32.c:149: warning: Excess function parameter 'tab' description in 'crc32_le_generic'
./lib/crc32.c:294: warning: No description found for parameter 'tab)[256]'
./lib/crc32.c:294: warning: Excess function parameter 'tab' description in 'crc32_be_generic'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 14:06:56 -06:00
Mauro Carvalho Chehab
b97f193abf scripts/kernel-doc: fix parser for apostrophes
On ReST, adding a text like ``literal`` is valid. However,
the kernel-doc script won't handle it fine.

We really need this feature, in order to escape things like
%ph, with is found on some C files.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-02 14:06:50 -06:00
Al Viro
31af2f36d5 sparc: switch to RAW_COPY_USER
... and drop zeroing in sparc32.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-02 12:53:15 -04:00