Commit graph

678,699 commits

Author SHA1 Message Date
Dan Carpenter
a8c006aafe ALSA: timer: Info leak in snd_timer_user_tinterrupt()
The "r1" struct has memory holes.  We clear it with memset on one path
where it is used but not the other.  Let's just memset it at the start
of the function so it's always safe.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-31 17:27:05 +02:00
Dan Carpenter
e8ed68205f ALSA: timer: remove some dead code
We just checked "id.card < 0" on the lines before so we know it's not
true here.  We can delete that check.

Also checkpatch.pl complains about some extra curly braces so we may as
well fix that while we're at it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-31 17:27:02 +02:00
Paul Gortmaker
49e1590c2e serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text
In commit d0aeaa83f0 ("serial: exar:
split out the exar code from 8250_pci") the exar driver got its own
Kconfig.  However the text for the new option was never changed from
the original 8250_PCI text, and hence it appears confusing when you
get asked the same question twice:

  8250/16550 PCI device support (SERIAL_8250_PCI) [Y/n/m/?] (NEW)
    8250/16550 PCI device support (SERIAL_8250_EXAR) [Y/n/m] (NEW)

Adding to the confusion, is that there is no help text for this new
option to indicate it is specific to a certain family of cards.

Fix both issues at the same time, as well as the space vs. tab issues
introduced in the same commit.

Fixes: d0aeaa83f0 ("serial: exar: split out the exar code from 8250_pci")
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 17:26:20 +02:00
Nicolas Ferre
497e1e16f4 tty/serial: atmel: fix TX path in atmel_console_write()
A side effect of 89d8232411 ("tty/serial: atmel_serial: BUG: stop DMA
from transmitting in stop_tx") is that the console can be called with
TX path disabled. Then the system would hang trying to push charecters
out in atmel_console_putchar().

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 89d8232411 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting
in stop_tx")
Cc: stable <stable@vger.kernel.org>	#4.4+
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 17:26:20 +02:00
Richard Genoud
31ca2c63fd tty/serial: atmel: fix race condition (TX+DMA)
If uart_flush_buffer() is called between atmel_tx_dma() and
atmel_complete_tx_dma(), the circular buffer has been cleared, but not
atmel_port->tx_len.
That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
atmel_port->tx_len) bytes).

Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org> # 3.12+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 17:26:19 +02:00
Uwe Kleine-König
a6040bc610 serial: mxs-auart: Fix baudrate calculation
The reference manual for the i.MX28 recommends to calculate the divisor
as

	divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer

, so let's do this. For a typical setup of UARTCLK = 24 MHz and baud
rate = 115200 this changes the divisor from 6666 to 6667 and so the
actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to
115194.240 Bd (error ≅ 0.005 %).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 17:26:19 +02:00
Rémy Léone
c46988aef2 Use sphinx.version_info directly instead of parsing
Using the development version of sphinx caused the parsing of the
version to fail.

Signed-off-by: Rémy Léone <remy.leone@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-31 09:19:37 -06:00
Cao jin
036db11cab sparse doc: fix reference path
Documentation/sparse.txt has been moved to
Documentation/dev-tools/sparse.rst

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-31 09:18:38 -06:00
Dmitry Bilunov
7a0c5c5b83 dm raid: fix NULL pointer dereference for raid1 without bitmap
Commit 4257e08 ("dm raid: support to change bitmap region size")
introduced a bitmap resize call during preresume phase. User can create
a DM device with "raid" target configured as raid1 with no metadata
devices to hold superblock/bitmap info. It can be achieved using the
following sequence:

  truncate -s 32M /dev/shm/raid-test
  LOOP=$(losetup --show -f /dev/shm/raid-test)
  dmsetup create raid-test-linear0 --table "0 1024 linear $LOOP 0"
  dmsetup create raid-test-linear1 --table "0 1024 linear $LOOP 1024"
  dmsetup create raid-test --table "0 1024 raid raid1 1 2048 2 - /dev/mapper/raid-test-linear0 - /dev/mapper/raid-test-linear1"

This results in the following crash:

[ 4029.110216] device-mapper: raid: Ignoring chunk size parameter for RAID 1
[ 4029.110217] device-mapper: raid: Choosing default region size of 4MiB
[ 4029.111349] md/raid1:mdX: active with 2 out of 2 mirrors
[ 4029.114770] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[ 4029.114802] IP: bitmap_resize+0x25/0x7c0 [md_mod]
[ 4029.114816] PGD 0
…
[ 4029.115059] Hardware name: Aquarius Pro P30 S85 BUY-866/B85M-E, BIOS 2304 05/25/2015
[ 4029.115079] task: ffff88015cc29a80 task.stack: ffffc90001a5c000
[ 4029.115097] RIP: 0010:bitmap_resize+0x25/0x7c0 [md_mod]
[ 4029.115112] RSP: 0018:ffffc90001a5fb68 EFLAGS: 00010246
[ 4029.115127] RAX: 0000000000000005 RBX: 0000000000000000 RCX: 0000000000000000
[ 4029.115146] RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000000
[ 4029.115166] RBP: ffffc90001a5fc28 R08: 0000000800000000 R09: 00000008ffffffff
[ 4029.115185] R10: ffffea0005661600 R11: ffff88015cc29a80 R12: ffff88021231f058
[ 4029.115204] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 4029.115223] FS:  00007fe73a6b4740(0000) GS:ffff88021ea80000(0000) knlGS:0000000000000000
[ 4029.115245] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4029.115261] CR2: 0000000000000030 CR3: 0000000159a74000 CR4: 00000000001426e0
[ 4029.115281] Call Trace:
[ 4029.115291]  ? raid_iterate_devices+0x63/0x80 [dm_raid]
[ 4029.115309]  ? dm_table_all_devices_attribute.isra.23+0x41/0x70 [dm_mod]
[ 4029.115329]  ? dm_table_set_restrictions+0x225/0x2d0 [dm_mod]
[ 4029.115346]  raid_preresume+0x81/0x2e0 [dm_raid]
[ 4029.115361]  dm_table_resume_targets+0x47/0xe0 [dm_mod]
[ 4029.115378]  dm_resume+0xa8/0xd0 [dm_mod]
[ 4029.115391]  dev_suspend+0x123/0x250 [dm_mod]
[ 4029.115405]  ? table_load+0x350/0x350 [dm_mod]
[ 4029.115419]  ctl_ioctl+0x1c2/0x490 [dm_mod]
[ 4029.115433]  dm_ctl_ioctl+0xe/0x20 [dm_mod]
[ 4029.115447]  do_vfs_ioctl+0x8d/0x5a0
[ 4029.115459]  ? ____fput+0x9/0x10
[ 4029.115470]  ? task_work_run+0x79/0xa0
[ 4029.115481]  SyS_ioctl+0x3c/0x70
[ 4029.115493]  entry_SYSCALL_64_fastpath+0x13/0x94

The raid_preresume() function incorrectly assumes that the raid_set has
a bitmap enabled if RT_FLAG_RS_BITMAP_LOADED is set.  But
RT_FLAG_RS_BITMAP_LOADED is getting set in __load_dirty_region_bitmap()
even if there is no bitmap present (and bitmap_load() happily returns 0
even if a bitmap isn't present).  So the only way forward in the
near-term is to check if the bitmap is present by seeing if
mddev->bitmap is not NULL after bitmap_load() has been called.

By doing so the above NULL pointer is avoided.

Fixes: 4257e08 ("dm raid: support to change bitmap region size")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Dmitry Bilunov <kmeaw@yandex-team.ru>
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Acked-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-31 11:05:54 -04:00
Stefan Agner
abf1e0a980 tty: serial: fsl_lpuart: lock port on console write
The console write code is not entirely race free (e.g. the operations
to disabling the UART interrupts are not atomic) hence locking is
required. This has been become apparent with the PREEMPT RT patchset
applied: With the fully preemptible kernel configuration the system
often ended up in a freeze already at startup.

Disable interrupts and lock using read_lock_irqsave. Try to lock in
the sysrq/oops case, but don't bother if locking fails.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 16:56:10 +02:00
Tobias Klauser
4d9d7d896d serial: altera_uart: add earlycon support
Nios2 currently uses its own early printk implementation, rather than
using unified earlycon support to show boot messages on altera_uart.

Add earlycon support to altera_uart so that other archs may use it.
Also, this (together with the corresponding patch for altera_jtaguart)
will allow the early printk implementation in arch/nios2 to be removed
in a future patch.

Cc: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 16:56:10 +02:00
Tim Gardner
a4199f5eb8 tty: Disable default console blanking interval
BugLink: http://bugs.launchpad.net/bugs/869017

Console blanking is not enabling DPMS power saving (thereby negating any
power-saving benefit), and is simply turning the screen content blank. This
means that any crash output is invisible which is unhelpful on a server
(virtual or otherwise).

Furthermore, CRT burn in concerns should no longer govern the default case.
Affected users could always set consoleblank on the kernel command line.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 16:56:10 +02:00
Vignesh R
b2c663d155 serial: 8250: 8250_core: Fix irq name for 8250 serial IRQ
Using dev_name() as IRQ name during request_irq() might be misleading in
case of serial over PCI. Therefore identify serial port IRQ using
uart_port's name field. This will help mapping IRQs to appropriate
ttySN(where N is the serial port index) instances.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 16:56:10 +02:00
Vignesh R
f7048b1590 tty: serial_core: Add name field to uart_port struct
Introduce a field to store name of uart_port that can be used to easily
identify UART port instances on a system that has more than one UART
instance. The name is of the form ttyXN(eg. ttyS0, ttyAMA0,..) where N
is number that particular UART instance.
This field will be useful when printing debug info for a particular port
or in register IRQs with unique IRQ name. Port name is populated during
uart_add_one_port().

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 16:56:10 +02:00
Thomas Gleixner
a89eae6225 irqchip fixes for 4.11-rc5
- Fix mvebu-odmi dependency selection
 - Fix mips-gic virtual/hw mapping
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAljeXH4VHG1hcmMuenlu
 Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDLsgQAKyoMYSotsh8WTLvTjegmgFbWDs/
 cs5NsCwSUBiuuNvikD9H7gXbeNWeF8P4sHS7T6E+2zRycconYCqYWfa7LxKEL+dd
 1ZuD4opRaHoVSH5Q/MFYorCWkGvFrLydgStKIeq4gDJgUpSAmZzw91IzJI1w55k5
 g5UH2bfQaQUTn9rCwcq5j9zuKr2bCsSVveYZ66TDfZrYafilX/v6KbDPtSLWxymb
 Nc0XqYcEeQcYHqMLGKYW6dr/9Qzc643qvFacST4tHcondlToHBzk2iFCQAlO64B1
 e1L9SKTagdy3jdK6TpZptV5UFO9MqrLbxy4C1DJnWqKv0MawOhrTQh06gorBS0K+
 ACsStpEdpHLCrdHk5a7njVKzbANF6nuKU6nmJQdyFBo4AIBTl42deTtGBo4y3xUR
 IRjb/LvZguBP7RbDp2KpQu5GzHj5h5wdIw33e455+cEYxrNGP9v8OWSAa0cvZOC4
 5bCnCkT1zTWYSOm0ALTFp5SKgEGru/rBoVCel15v353H5MeQoRdeIA913iUWEVb6
 92c8wAxIky4L1APfLLzr0vc0jPds6xX2dDTo15Z8sWz4X51MHuYWa9tHqOJLxtDO
 X0IQCmexf0RMovG64I9se6dHlykjiMX6gNwpdEata3hnNYrZNcECgD7POqi8TBag
 GI4ctsSPXBdoNF71
 =rcDs
 -----END PGP SIGNATURE-----

Merge tag 'irq-fixes-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier

- Fix mvebu-odmi dependency selection
- Fix mips-gic virtual/hw mapping
2017-03-31 16:54:48 +02:00
Dmitry Safonov
ada26481df x86/mm: Make in_compat_syscall() work during exec
The x86 mmap() code selects the mmap base for an allocation depending on
the bitness of the syscall. For 64bit sycalls it select mm->mmap_base and
for 32bit mm->mmap_compat_base.

On execve the registers of the task invoking exec() are copied to the child
pt_regs. So child->pt_regs->orig_ax contains the execve syscall number of the
parent.

exec() calls mmap() which in turn uses in_compat_syscall() to check whether
the mapping is for a 32bit or a 64bit task. The decision is made on the
following criteria:

  ia32	  child->thread.status & TS_COMPAT
   x32	  child->pt_regs.orig_ax & __X32_SYSCALL_BIT
  ia64	  !ia32 && !x32 

child->thread.status is corretly set up in set_personality_*(), but the
syscall number in child->pt_regs.orig_ax is left unmodified.

Therefore the parent/child combinations work or fail in the following way:

Parent Child Child->thread_status  child->pt_regs.orig_ax  in_compat()  Works
ia64    ia64   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 0     false       Y
ia64    ia32   TS_COMPAT == 1	   __X32_SYSCALL_BIT == 0     true        Y
ia64     x32   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 0     false       N
ia32    ia64   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 0     false       Y
ia32    ia32   TS_COMPAT == 1	   __X32_SYSCALL_BIT == 0     true        Y
ia32     x32   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 0     false       N
 x32    ia64   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 1     true        N
 x32    ia32   TS_COMPAT == 1	   __X32_SYSCALL_BIT == 1     true        Y
 x32     x32   TS_COMPAT == 0	   __X32_SYSCALL_BIT == 1     true        Y

Make set_personality_*() store the syscall number incl. __X32_SYSCALL_BIT
which corresponds to the newly started ELF executable in the childs
pt_regs, i.e. pretend that the exec was invoked from a task with the same
executable format.

So both thread.status and pt_regs.orig_ax correspond to the new ELF format
and in_compat_syscall() returns the correct result.

[ tglx: Rewrote changelog ]

Fixes: commit 1b028f784e ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Reported-by: Adam Borowski <kilobyte@angband.pl>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170331111137.28170-1-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-31 16:53:02 +02:00
Paulo Zanoni
d7c530b259 drm/i915: make a few DDI functions static
We don't need to export them since they're not being used outside the
file. The next time I try to find the callers for these things I will
know I won't need to look outside intel_ddi.c.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490907472-10883-1-git-send-email-paulo.r.zanoni@intel.com
2017-03-31 11:32:41 -03:00
Eric Biggers
f363b089be blk-mq: constify struct blk_mq_ops
Constify all instances of blk_mq_ops, as they are never modified.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-31 08:28:58 -06:00
Jiri Olsa
3e00cbe889 perf tools: Do not fail in case of empty HOME env variable
Currently we fail in the following case:

  $ unset HOME
  $ ./perf record ls
  $ echo $?
  255

It's because the config code init fails due to a missing HOME variable
value. Fix this by skipping the user config init if there's no HOME
variable value.

Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170330144637.7468-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-31 11:26:04 -03:00
Arnaldo Carvalho de Melo
67ef28794d tools include uapi: Grab copies of stat.h and fcntl.h
We will need it to build tools/perf/trace/beauty/statx.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nin41ve2fa63lrfbdr6x57yr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-31 11:26:03 -03:00
Dan Carpenter
5885615e44 ALSA: emux: stop if copy_from_user() fails
If we can't fill the "patch" struct because "count" is too small (it can
be as low as 4 bytes) or because copy_from_user() failed, then just
return instead of using unintialized data.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-31 16:23:52 +02:00
Matt Redfearn
42969893b4 irqchip/mips-gic: Fix Local compare interrupt
Commit 4cfffcfa51 ("irqchip/mips-gic: Fix local interrupts") added
mapping of several local interrupts during initialisation of the gic
driver. This associates virq numbers with these interrupts.
Unfortunately, as not all of the interrupts are mapped in hardware
order, when drivers subsequently request these interrupts they conflict
with the mappings that have already been set up. For example, this
manifests itself in the gic clocksource driver, which fails to probe
with the message:

clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x7350c9738,
max_idle_ns: 440795203769 ns
GIC timer IRQ 25 setup failed: -22

This is because virq 25 (the correct IRQ number specified via device
tree) was allocated to the PERFCTR interrupt (and 24 to the timer, 26 to
the FDC). To fix this, map all of these local interrupts in the hardware
order so as to associate their virq numbers with the correct hw
interrupts.

Fixes: 4cfffcfa51 ("irqchip/mips-gic: Fix local interrupts")
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-31 14:38:25 +01:00
Jan Kiszka
7cd3e9dbdd serial: 8250_lpss: Unconditionally set PCI master for Quark
MSI needs it as well.

Should have no practical impact, though, as DMA is always available on
the Quark. But given the few users of pci_alloc_irq_vectors so far, this
incorrect pattern may spread otherwise.

Fixes: 3f3a46951e ("serial: 8250_lpss: set PCI master only for private DMA")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 15:36:54 +02:00
Samuel Thibault
2ed2b8621b braille-console: Fix value returned by _braille_console_setup
commit bbeddf52ad ("printk: move braille console support into
separate braille.[ch] files") introduced _braille_console_setup()
to outline the braille initialization code.  There was however some
confusion over the value it was supposed to return. commit 2cfe6c4ac7
("printk: Fix return of braille_register_console()") tried to fix it
but failed to.

This fixes and documents the returned value according to the use
in printk.c: non-zero return means a parsing error, and thus this
console configuration should be ignored.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Aleksey Makarov <aleksey.makarov@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 15:29:06 +02:00
Geert Uytterhoeven
cfa6eb2391 serial: sh-sci: Fix (AUTO)RTS in sci_init_pins()
If a UART has dedicated RTS/CTS pins, and hardware control flow is
disabled (or AUTORTS is not yet effective), changing any serial port
configuration deasserts RTS, as .set_termios() calls sci_init_pins().

To fix this, consider the current (AUTO)RTS state when (re)initializing
the pins.  Note that for SCIFA/SCIFB, AUTORTS needs explicit
configuration of the RTS# pin function, while (H)SCIF handles this
automatically.

Fixes: d2b9775d79 ("serial: sh-sci: Correct pin initialization on (H)SCIF")
Fixes: e9d7a45a03 ("serial: sh-sci: Add pin initialization for SCIFA/SCIFB")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 15:29:06 +02:00
Geert Uytterhoeven
5f76895e4c serial: sh-sci: Fix late enablement of AUTORTS
When changing hardware control flow for a UART with dedicated RTS/CTS
pins, the new AUTORTS state is not immediately reflected in the
hardware, but only when RTS is raised.  However, the serial core does
not call .set_mctrl() after .set_termios(), hence AUTORTS may only
become effective when the port is closed, and reopened later.
Note that this problem does not happen when manually using stty to
change CRTSCTS, as AUTORTS will work fine on next open.

To fix this, call .set_mctrl() from .set_termios() when dedicated
RTS/CTS pins are present, to refresh the AUTORTS or RTS state.
This is similar to what other drivers supporting AUTORTS do (e.g.
omap-serial).

Reported-by: Baumann, Christoph (C.) <cbaumann@visteon.com>
Fixes: 33f50ffc25 ("serial: sh-sci: Fix support for hardware-assisted RTS/CTS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 15:29:05 +02:00
Geert Uytterhoeven
e37f712f76 serial: sh-sci: Fix hang in sci_reset()
When the .set_termios() callback resets the UART, it first waits (busy
loops) until all characters in the transmit FIFO have been transmitted,
to prevent a port configuration change from impacting these characters.

However, if the UART has dedicated RTS/CTS hardware flow control
enabled, these characters may have been stuck in the FIFO due to CTS not
being asserted by the remote side.

  - When a new user opens the port, .set_termios() is called while
    transmission is still disabled, leading to an infinite loop:

	NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s!

  - When an active user changes port configuration without waiting for
    the draining of the transmit FIFO, this may also block indefinitely,
    until CTS is asserted by the remote side.

This has been observed with SCIFA (on r8a7740/armadillo), and SCIFB and
HSCIF (on r8a7791/koelsch).

To fix this, remove the code that waits for the draining of the transmit
FIFO.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 15:29:05 +02:00
Lee Jones
b5090cb46e serial: st-asc: Change default baudrate from 9600 to 115200
9600 is old school.

Most applications use 115200 as the default baud these days.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 15:29:05 +02:00
Lionel Debieve
ef49ffd8b5 tty: serial: st-asc: Make the locking RT aware
The lock is a sleeping lock and local_irq_save() is not the
standard implementation now. Working for both -RT and non
RT.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 15:29:05 +02:00
Alexandre TORGUE
a1365c4081 ARM: configs: Add new config fragment to change RAM start point
Add a new fragment to over-ride the RAM start point to 0xd0000000.

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-31 14:19:40 +02:00
M'boumba Cedric Madianga
0899cd2a5f ARM: configs: stm32: Add I2C support
This patch adds I2C support for STM32 default configuration

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-31 14:19:18 +02:00
Aneesh Kumar K.V
f6eedbba7a powerpc/mm/hash: Increase VA range to 128TB
We update the hash linux page table layout such that we can support
512TB. But we limit the TASK_SIZE to 128TB. We can switch to 128TB by
default without conditional because that is the max virtual address
supported by other architectures. We will later add a mechanism to
on-demand increase the application's effective address range to 512TB.

Having the page table layout changed to accommodate 512TB makes testing
large memory configuration easier with less code changes to kernel

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:10:01 +11:00
Aneesh Kumar K.V
59248aecc4 powerpc/mm/hash: Convert mask to unsigned long
This doesn't have any functional change. But helps in avoiding mistakes
in case the shift bit changes

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:10:00 +11:00
Aneesh Kumar K.V
e6f81a9201 powerpc/mm/hash: Support 68 bit VA
Inorder to support large effective address range (512TB), we want to
increase the virtual address bits to 68. But we do have platforms like
p4 and p5 that can only do 65 bit VA. We support those platforms by
limiting context bits on them to 16.

The protovsid -> vsid conversion is verified to work with both 65 and 68
bit va values. I also documented the restrictions in a table format as
part of code comments.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:10:00 +11:00
Michael Ellerman
85beb1c486 powerpc/mm/hash: Check for non-kernel address in get_kernel_vsid()
get_kernel_vsid() has a very stern comment saying that it's only valid
for kernel addresses, but there's nothing in the code to enforce that.

Rather than hoping our callers are well behaved, add a check and return
a VSID of 0 (invalid).

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:59 +11:00
Aneesh Kumar K.V
941711a3a0 powerpc/mm/hash: Use context ids 1-4 for the kernel
Currently we use the top 4 context ids (0x7fffc-0x7ffff) for the kernel.
Kernel VSIDs are built using these top context values and effective the
segement ID. In subsequent patches we want to increase the max effective
address to 512TB. We will achieve that by increasing the effective
segment IDs there by increasing virtual address range.

We will be switching to a 68bit virtual address in the following patch.
But platforms like Power4 and Power5 only support a 65 bit virtual
address. We will handle that by limiting the context bits to 16 instead
of 19 on those platforms. That means the max context id will have a
different value on different platforms.

So that we don't have to deal with the kernel context ids changing
between different platforms, move the kernel context ids down to use
context ids 1-4.

We can't use segment 0 of context-id 0, because that maps to VSID 0,
which we want to keep as invalid, so we avoid context-id 0 entirely.
Similarly we can't use the last segment of the maximum context, so we
avoid it too.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Switch from 0-3 to 1-4 so VSID=0 remains invalid]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:59 +11:00
Michael Ellerman
760573c1a9 powerpc/mm: Split radix vs hash mm context initialisation
Complete the split of the radix vs hash mm context initialisation.

This is mostly code movement, with the exception that we now limit the
context allocation to PRTB_ENTRIES - 1 on radix.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:58 +11:00
Michael Ellerman
c1ff840d21 powerpc/mm/hash: Pull hash constants into hash__alloc_context_id()
The min and max context id values used in alloc_context_id() are
currently the right values for use on hash, and happen to also be safe
for use on radix.

But we need to change that in a subsequent patch, so make the min/max
ids parameters and pull the hash values into hsah__alloc_context_id().

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:58 +11:00
Michael Ellerman
a336f2f5b0 powerpc/mm/hash: Abstract context id allocation for KVM
KVM wants to be able to allocate an MMU context id, which it does
currently by calling __init_new_context().

We're about to rework that code, so provide a wrapper for KVM so it
can not worry about the details.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:57 +11:00
Aneesh Kumar K.V
302413cad5 powerpc/mm/slice: Update slice mask printing to use bitmap printing.
We now get output like below which is much better.

[    0.935306]  good_mask low_slice: 0-15
[    0.935360]  good_mask high_slice: 0-511

Compared to

[    0.953414]  good_mask:1111111111111111 - 1111111111111.........

I also fixed an error with slice_dbg printing.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:56 +11:00
Aneesh Kumar K.V
82185222ff powerpc/mm/slice: Move slice_mask struct definition to slice.c
This structure definition need not be in a header since this is used only by
slice.c file. So move it to slice.c. This also allow us to use SLICE_NUM_HIGH
instead of 64.

I also switch the low_slices type to u64 from u16. This doesn't have an impact
on size of struct due to padding added with u16 type. This helps in using
bitmap printing function for printing slice mask.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:56 +11:00
Aneesh Kumar K.V
1b2fa5a046 powerpc/mm: Remove checks that TASK_SIZE_USER64 is too small
Remove the checks that TASK_SIZE_USER64 is smaller than H_PGTABLE_RANGE
and USER_VSID_RANGE.

In a following patch we will deliberately add support for a TASK_SIZE
smaller than both ranges, so this will no longer be an error condition.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Keep the check in pgtable_64.c that we don't exceed USER_VSID_RANGE]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:55 +11:00
Aneesh Kumar K.V
52b1e66587 powerpc/mm: Move copy_mm_to_paca to paca.c
We also update the function arg to struct mm_struct. Move this so that function
finds the definition of struct mm_struct. No functional change in this patch.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:54 +11:00
Aneesh Kumar K.V
a4d3621503 powerpc/mm/slice: Update the function prototype
This avoid copying the slice_mask struct as function return value

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:54 +11:00
Aneesh Kumar K.V
f3207c124e powerpc/mm/slice: Convert slice_mask high slice to a bitmap
In followup patch we want to increase the va range which will result
in us requiring high_slices to have more than 64 bits. To enable this
convert high_slices to bitmap. We keep the number bits same in this patch
and later change that to higher value

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Fold in fix to use bitmap_empty()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:53 +11:00
Aneesh Kumar K.V
6aa59f5162 powerpc/mm: Move hash specific pte bits to be top bits of RPN
We don't support the full 57 bits of physical address and hence can
overload the top bits of RPN as hash specific pte bits.

Add a BUILD_BUG_ON() to enforce the relationship between H_PAGE_F_SECOND
and H_PAGE_F_GIX.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Move the BUILD_BUG_ON() into hash_utils_64.c and comment it]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:52 +11:00
Aneesh Kumar K.V
2f18d53375 powerpc/mm: Lower the max real address to 53 bits
Max value supported by hardware is 51 bits address. Radix page table define
a slot of 57 bits for future expansion. We restrict the value supported in
linux kernel 53 bits, so that we can use the bits between 57-53 for storing
hash linux page table bits. This is done in the next patch.

This will free up the software page table bits to be used for features
that are needed for both hash and radix. The current hash linux page table
format doesn't have any free software bits. Moving hash linux page table
specific bits to top of RPN field free up the software bits for other purpose.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:52 +11:00
Aneesh Kumar K.V
32789d3821 powerpc/mm: Define all PTE bits based on radix definitions.
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:51 +11:00
Aneesh Kumar K.V
54c4025efc powerpc/mm: Define _PAGE_SOFT_DIRTY unconditionally
Conditional PTE bit definition is confusing and results in coding error.

Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:51 +11:00
Aneesh Kumar K.V
a525108cf1 powerpc/mm/hugetlb: Filter out hugepage size not supported by page table layout
Without this if firmware reports 1MB page size support we will crash
trying to use 1MB as hugetlb page size.

echo 300 > /sys/kernel/mm/hugepages/hugepages-1024kB/nr_hugepages

kernel BUG at ./arch/powerpc/include/asm/hugetlb.h:19!
.....
....
[c0000000e2c27b30] c00000000029dae8 .hugetlb_fault+0x638/0xda0
[c0000000e2c27c30] c00000000026fb64 .handle_mm_fault+0x844/0x1d70
[c0000000e2c27d70] c00000000004805c .do_page_fault+0x3dc/0x7c0
[c0000000e2c27e30] c00000000000ac98 handle_page_fault+0x10/0x30

With fix, we don't enable 1MB as hugepage size.

bash-4.2# cd /sys/kernel/mm/hugepages/
bash-4.2# ls
hugepages-16384kB  hugepages-16777216kB

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 23:09:50 +11:00