On some boards the hpd pin of a hdmi connector is wired up to a gpio
pin. Since in the DRM world the tfp410 driver is responsible for
handling the connector, add support for hpd gpios in this very driver.
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/2e47786ab3d04078ae70d0c4064f7c4d@rwthex-s1-b.rwth-ad.de
Commit 3b164a00a9 ("HID: wacom: Cleanup unsupported device_type
for BAMBOO_PT") cleaned up Bamboo devices which our driver falsely
claimed had touch. Bamboo One Medium also does not have touch.
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit a544c619a5 ("HID: wacom: do not attempt to switch mode
while in probe") introduces delayed work for querying (setting the
mode) on all tablets. Bamboo Touch (056a:00d0) has a ghost
interface which claims to be a pen device. Though this device can
be removed, we have to set the mode on the ghost pen interface
before we remove it. After the aforementioned delay was introduced
the device was being removed before the mode setting could be
executed.
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A previous commit (below) adds a check for already probed interfaces to
Wacom's matching heuristic. Unfortunately this causes the Bamboo Pen
(CTL-460) to match itself to its 'ghost' touch interface. After
subsequent changes to the driver this match to the ghost causes the
kernel to crash. This patch avoids calling wacom_add_shared_data()
for the BAMBOO_PEN's ghost touch interface.
Fixes: 41372d5d40 ("HID: wacom: Augment 'oVid' and 'oPid' with heuristics for HID_GENERIC")
Cc: stable <stable@vger.kernel.org> # 4.9
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
By allowing platform MSI domain to be created on ACPI platforms,
a platform device MSI domain can be set-up when it is probed.
In order to do that, the MSI domain the platform device connects
to should be retrieved, so the iort_get_platform_device_domain() is
introduced to retrieve the domain from the IORT kernel layer.
With the domain retrieved, we need a proper way to set the
domain to platform device.
Given that some platform devices (irqchips) require the MSI irqdomain
to be their interrupt parent domain, the MSI irqdomain should be
determined before platform device is probed but after the platform
device is allocated which means that the code setting up the MSI
irqdomain, ie acpi_configure_pmsi_domain() should be called in
acpi_platform_notify() (that is triggered after adding a device but
before the respective driver is probed) for the platform MSI domain
code set-up path to work properly.
Acked-by: Rafael J. Wysocki <rafael@kernel.org> [for glue.c]
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
[lorenzo.pieralisi@arm.com: rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Ming Lei <ming.lei@canonical.com>
Tested-by: Wei Xu <xuwei5@hisilicon.com>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
The input mapping code incorrectly maps the Airplane Mode button to
KEY_WLAN, which stands for WiFi toggle, but doesn't affect Bluetooth
(and other active radios) which is expected behavior for Airplane
Mode.
The fix replaces KEY_WLAN with the more appropriate KEY_RFKILL.
The declared usage code 0x88 corresponds to Airplane Mode button on
all keyboards handled by hid-asus (I2C netbook keyboards and USB
RoG series keyboards), so the fix doesn't introduce any
inconsistencies across different models.
Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Keyboards handled by hid-asus declare special key functions
using a vendor-specific page, however, alongside legitimate
key functions, dummy usages with seemingly arbitrary values
are also declared and can lead to keyboards being detected
as pointer devices by some software (such as X.org).
In addition, for the I2C keyboard volume controls are
separately declared in a Consumer Usage page, with the same
dummy usage problem.
The fix in 1989dada7c ("HID: input: ignore System Control
application usages if not System Controls") does not mitigate
the problem described above, therefore dummy usages need to
be ignored in the driver itself.
This fix properly ignores dummy usages and introduces a quirk
for custom handling of the Consumer Usages on the I2C keyboard.
Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Before commits a1cbda7a65a7a ("HID: asus: drop dependency
on I2C_HID") and 64a403c6555fd ("HID: asus: support Republic
Of Gamers special keys") hid-asus only pertained to a single
I2C keyboard model found in ASUS X205TA, F205TA, & X200HA. The
aforementioned commits expanded this support to other ASUS
laptop keyboard models.
In order to clarify that existing keyboard and touchpad quirks
only apply to the I2C devices, and not ASUS keyboards in
general, I2C HID IDs and their corresponding quirk sets have
been renamed. In addition, the latter commit introduced
special key handling, which also applies to the I2C keyboard,
not just Republic of Gamers series. Therefore, the
rog_map_key_clear() macro is renamed to asus_map_key_clear()
for the sake of generality.
Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for the special keys found on the internal keyboard of the
Asus Republic of Gamers (ROG) laptop models GL553VD, GL553VE, GL753VD
and GL753VE.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is nothing transport-specific in this driver, and we will now be
adding support for some Asus USB devices too.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For devices connecting to an ITS, the devices need to identify themself
through a devid; this devid is represented in the IORT table in named
component node [1] for platform devices, so this patch adds code that
scans the IORT table to retrieve the devices devid.
Add an IORT interface to collect ITS devices devid to carry out platform
devices MSI mappings with IORT tables.
[1]: https://static.docs.arm.com/den0049/b/DEN0049B_IO_Remapping_Table.pdf
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
[lorenzo.pieralisi@arm.com: rewrote commit log/dropped ITS changes]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Ming Lei <ming.lei@canonical.com>
Tested-by: Wei Xu <xuwei5@hisilicon.com>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
If, while locating GPIOs by name, we get probe deferral, we should
immediately report it to caller rather than trying to fall back to parsing
unnamed GPIOs from _CRS block.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-and-Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On Bay Trail / Cherry Trail systems with a LID switch, the LID switch is
often connect to a gpioint handled by an _IAE event handler.
Before this commit such systems would not wake up when opening the lid,
requiring the powerbutton to be pressed after opening the lid to wakeup.
Note that Bay Trail / Cherry Trail systems use suspend-to-idle, so
the interrupts are generated anyway on those lines on lid switch changes,
but they are treated by the IRQ subsystem as spurious while suspended if
not marked as wakeup IRQs.
This commit calls enable_irq_wake() for _IAE GpioInts with a valid
event handler which have their Wake flag set. This fixes such systems
not waking up when opening the lid.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
They are part of HUTRR34 for multi-touch digitizers:
0x0E Device configuration CA 16.7
0x23 Device settings CL 16.7
Signed-off-by: Xiaolei Yu <dreifachstein@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It's reported that the time of insmoding a klp.ko for one of our
out-tree modules is too long.
~ time sudo insmod klp.ko
real 0m23.799s
user 0m0.036s
sys 0m21.256s
Then we found the reason: our out-tree module used a lot of static local
variables, so klp.ko has a lot of relocation records which reference the
module. Then for each such entry klp_find_object_symbol() is called to
resolve it, but this function uses the interface kallsyms_on_each_symbol()
even for finding module symbols, so will waste a lot of time on walking
through vmlinux kallsyms table many times.
This patch changes it to use module_kallsyms_on_each_symbol() for modules
symbols. After we apply this patch, the sys time reduced dramatically.
~ time sudo insmod klp.ko
real 0m1.007s
user 0m0.032s
sys 0m0.924s
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The t_data_nents and t_bidi_data_nents are the numbers of the
segments, but it couldn't be sure the block size equals to size
of the segment.
For the worst case, all the blocks are discontiguous and there
will need the same number of iovecs, that's to say: blocks == iovs.
So here just set the number of iovs to block count needed by tcmu
cmd.
Tested-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If there has BIDI data, its first iov[] will overwrite the last
iov[] for se_cmd->t_data_sg.
To fix this, we can just increase the iov pointer, but this may
introuduce a new memory leakage bug: If the se_cmd->data_length
and se_cmd->t_bidi_data_sg->length are all not aligned up to the
DATA_BLOCK_SIZE, the actual length needed maybe larger than just
sum of them.
So, this could be avoided by rounding all the data lengthes up
to DATA_BLOCK_SIZE.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Tested-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch closes a race between se_lun deletion during configfs
unlink in target_fabric_port_unlink() -> core_dev_del_lun()
-> core_tpg_remove_lun(), when transport_clear_lun_ref() blocks
waiting for percpu_ref RCU grace period to finish, but a new
NodeACL mappedlun is added before the RCU grace period has
completed.
This can happen in target_fabric_mappedlun_link() because it
only checks for se_lun->lun_se_dev, which is not cleared until
after transport_clear_lun_ref() percpu_ref RCU grace period
finishes.
This bug originally manifested as NULL pointer dereference
OOPsen in target_stat_scsi_att_intr_port_show_attr_dev() on
v4.1.y code, because it dereferences lun->lun_se_dev without
a explicit NULL pointer check.
In post v4.1 code with target-core RCU conversion, the code
in target_stat_scsi_att_intr_port_show_attr_dev() no longer
uses se_lun->lun_se_dev, but the same race still exists.
To address the bug, go ahead and set se_lun>lun_shutdown as
early as possible in core_tpg_remove_lun(), and ensure new
NodeACL mappedlun creation in target_fabric_mappedlun_link()
fails during se_lun shutdown.
Reported-by: James Shen <jcs@datera.io>
Cc: James Shen <jcs@datera.io>
Tested-by: James Shen <jcs@datera.io>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a iscsi-target specific TMR reference leak
during session shutdown, that could occur when a TMR was
quiesced before the hand-off back to iscsi-target code
via transport_cmd_check_stop_to_fabric().
The reference leak happens because iscsit_free_cmd() was
incorrectly skipping the final target_put_sess_cmd() for
TMRs when transport_generic_free_cmd() returned zero because
the se_cmd->cmd_kref did not reach zero, due to the missing
se_cmd assignment in original code.
The result was iscsi_cmd and it's associated se_cmd memory
would be freed once se_sess->sess_cmd_map where released,
but the associated se_tmr_req was leaked and remained part
of se_device->dev_tmr_list.
This bug would manfiest itself as kernel paging request
OOPsen in core_tmr_lun_reset(), when a left-over se_tmr_req
attempted to dereference it's se_cmd pointer that had
already been released during normal session shutdown.
To address this bug, go ahead and treat ISCSI_OP_SCSI_CMD
and ISCSI_OP_SCSI_TMFUNC the same when there is an extra
se_cmd->cmd_kref to drop in iscsit_free_cmd(), and use
op_scsi to signal __iscsit_free_cmd() when the former
needs to clear any further iscsi related I/O state.
Reported-by: Rob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Reported-by: Chu Yuan Lin <cyl@datera.io>
Cc: Chu Yuan Lin <cyl@datera.io>
Tested-by: Chu Yuan Lin <cyl@datera.io>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch corrects the argument in usb_ep_free_request as it is
mistakenly set to ep_out. It should be ep_in for status request.
Signed-off-by: Manish Narani <mnarani@xilinx.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The new cmd_time_out configfs attribute for TCMU is allowed to
be disabled, so go ahead and drop the tcmu_cmd_time_out_store()
check.
Reported-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The size of .word is the size of a word in the given platform, which
for intel systems is 16-bits but other architectures use different
sizes. However, .hword emits 16-bit numbers regardless of the
platform (and despite the name). The quantities specified in EDID are
platform independent, so they should work in spite of the default
target of the cc you are using, so use .hword where EDID specifies
16-bit numbers.
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: David Airlie <airlied@linux.ie>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Javi Merino <javi.merino@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1490795123-16851-1-git-send-email-javi.merino@kernel.org
v2 of the commit 2c77bb29d3 ("drm: simplify the locking in the GETCRTC ioctl")
accidentally introduced a unrelated change in intel_display.c, revert the
unrelated change.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 2c77bb29d3 ("drm: simplify the locking in the GETCRTC ioctl")
Reported-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/6be47261-475f-c190-af56-c136677246d9@linux.intel.com
Add support for multiple IOMMUs to perf by exposing an AMD IOMMU PMU for
each IOMMU found in the system via:
/bus/event_source/devices/amd_iommu_x
where x is the IOMMU index. This allows users to specify different
events to be programmed into the performance counters of each IOMMU.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[ Improve readability, shorten names. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1490166162-10002-11-git-send-email-Suravee.Suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Current AMD IOMMU perf PMU inappropriately uses the hardware struct
inside the union in struct hw_perf_event, extra_reg in particular.
Instead, introduce an AMD IOMMU-specific struct with required parameters
to be programmed into the IOMMU performance counter control register.
Update the pasid field from 16 to 20 bits while at it.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[ Fixup macros, shorten get_next_avail_iommu_bnk_cntr() local vars, massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-10-git-send-email-Suravee.Suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, amd_iommu_pc_get_max_[banks|counters]() use end-point device
ID to locate an IOMMU and check the reported max banks/counters. The
logic assumes that the IOMMU_BASE_DEVID belongs to the first IOMMU, and
uses it to acquire a reference to the first IOMMU, which does not work
on certain systems. Instead, modify the function to take an IOMMU index,
and use it to query the corresponding AMD IOMMU instance.
Currently, hardcode the IOMMU index to 0 since the current AMD IOMMU
perf implementation supports only a single IOMMU. A subsequent patch
will add support for multiple IOMMUs, and will use a proper IOMMU index.
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-7-git-send-email-Suravee.Suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce amd_iommu_get_num_iommus(), which returns the value of
amd_iommus_present. The function is used to replace direct access to the
variable, which is now declared as static.
This function will also be used by AMD IOMMU perf driver.
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-6-git-send-email-Suravee.Suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Clean up register initialization and make use of BIT_ULL(x) where
appropriate. This should not affect logic and functionality.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-3-git-send-email-Suravee.Suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that Intel PT supports more types of trace content than just branch
tracing, it may be useful to allow the user to disable branch tracing
when it is not needed.
The special case is BDW, where not setting BranchEn is not supported.
This is slightly trickier than necessary, because up to this moment
the driver has been setting BranchEn automatically and the userspace
assumes as much. Instead of reversing the semantics of BranchEn, we
introduce a 'passthrough' bit, which will forego the default and allow
the user to set BranchEn to their heart's content.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170206144140.14402-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use a timeout rather than a fixed number of loops to avoid running for
very long periods, such as under the kbuilder VMs.
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170310105733.6444-1-chris@chris-wilson.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The main PELT function ___update_load_avg(), which implements the
accumulation and progression of the geometric average series, is
implemented along the following lines for the scenario where the time
delta spans all 3 possible sections (see figure below):
1. add the remainder of the last incomplete period
2. decay old sum
3. accumulate new sum in full periods since last_update_time
4. accumulate the current incomplete period
5. update averages
Or:
d1 d2 d3
^ ^ ^
| | |
|<->|<----------------->|<--->|
... |---x---|------| ... |------|-----x (now)
load_sum' = (load_sum + weight * scale * d1) * y^(p+1) + (1,2)
p
weight * scale * 1024 * \Sum y^n + (3)
n=1
weight * scale * d3 * y^0 (4)
load_avg' = load_sum' / LOAD_AVG_MAX (5)
Where:
d1 - is the delta part completing the remainder of the last
incomplete period,
d2 - is the delta part spannind complete periods, and
d3 - is the delta part starting the current incomplete period.
We can simplify the code in two steps; the first step is to separate
the first term into new and old parts like:
(load_sum + weight * scale * d1) * y^(p+1) = load_sum * y^(p+1) +
weight * scale * d1 * y^(p+1)
Once we've done that, its easy to see that all new terms carry the
common factors:
weight * scale
If we factor those out, we arrive at the form:
load_sum' = load_sum * y^(p+1) +
weight * scale * (d1 * y^(p+1) +
p
1024 * \Sum y^n +
n=1
d3 * y^0)
Which results in a simpler, smaller and faster implementation.
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: matt@codeblueprint.co.uk
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: umgwanakikbuti@gmail.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1486935863-25251-3-git-send-email-yuyang.du@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The __update_load_avg() function is an __always_inline because its
used with constant propagation to generate different variants of the
code without having to duplicate it (which would be prone to bugs).
Explicitly instantiate the 3 variants.
Note that most of this is called from rather hot paths, so reducing
branches is good.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh suggested moving the _ONCE logic inside the trap handler, using a
bit in the bug_entry::flags field, avoiding the need for the extra
variable.
Sadly this only works for WARN_ON_ONCE(), since the others have
printk() statements prior to triggering the trap.
Still, this saves a fair amount of text and some data:
text data filename
10682460 4530992 defconfig-build/vmlinux.orig
10665111 4530096 defconfig-build/vmlinux.patched
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I've screwed this up when removing the legacy backoff hack.
Fixes: 38b6441e4e ("drm/atomic-helper: Remove the backoff hack from set_config")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329174136.10330-1-daniel.vetter@ffwll.ch
Dmitry noted that the new atomic_try_cmpxchg() primitive is broken when
the old pointer doesn't point to the local stack.
He writes:
"Consider a classical lock-free stack push:
node->next = atomic_read(&head);
do {
} while (!atomic_try_cmpxchg(&head, &node->next, node));
This code is broken with the current implementation, the problem is
with unconditional update of *__po.
In case of success it writes the same value back into *__po, but in
case of cmpxchg success we might have lose ownership of some memory
locations and potentially over what __po has pointed to. The same
holds for the re-read of *__po. "
He also points out that this makes it surprisingly different from the
similar C/C++ atomic operation.
After investigating the code-gen differences caused by this patch; and
a number of alternatives (Linus dislikes this interface lots), we
arrived at these results (size x86_64-defconfig/vmlinux):
GCC-6.3.0:
10735757 cmpxchg
10726413 try_cmpxchg
10730509 try_cmpxchg + patch
10730445 try_cmpxchg-linus
GCC-7 (20170327):
10709514 cmpxchg
10704266 try_cmpxchg
10704266 try_cmpxchg + patch
10704394 try_cmpxchg-linus
From this we see that the patch has the advantage of better code-gen
on GCC-7 and keeps the interface roughly consistent with the C
language variant.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: a9ebf306f5 ("locking/atomic: Introduce atomic_try_cmpxchg()")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove faulty leftover check in do_rename(), apparently introduced in a
merge that combined whiteout support changes with commit f03b8ad8d3
("fs: support RENAME_NOREPLACE for local filesystems")
Fixes: f03b8ad8d3 ("fs: support RENAME_NOREPLACE for local
filesystems")
Fixes: 9e0a1fff8d ("ubifs: Implement RENAME_WHITEOUT")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Richard Weinberger <richard@nod.at>
instead of filenames, print inode numbers, file types, and length.
Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
if a character is not printable, print '?' instead of that.
Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
if filename is encrypted, filename could have no printable characters.
so remove it.
Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In commit 6afaf8a484 ("UBI: flush wl before clearing update marker") I
managed to trigger and fix a similar bug. Now here is another version of
which I assumed it wouldn't matter back then but it turns out UBI has a
check for it and will error out like this:
|ubi0 warning: validate_vid_hdr: inconsistent used_ebs
|ubi0 error: validate_vid_hdr: inconsistent VID header at PEB 592
All you need to trigger this is? "ubiupdatevol /dev/ubi0_0 file" + a
powercut in the middle of the operation.
ubi_start_update() sets the update-marker and puts all EBs on the erase
list. After that userland can proceed to write new data while the old EB
aren't erased completely. A powercut at this point is usually not that
much of a tragedy. UBI won't give read access to the static volume
because it has the update marker. It will most likely set the corrupted
flag because it misses some EBs.
So we are all good. Unless the size of the image that has been written
differs from the old image in the magnitude of at least one EB. In that
case UBI will find two different values for `used_ebs' and refuse to
attach the image with the error message mentioned above.
So in order not to get in the situation, the patch will ensure that we
wait until everything is removed before it tries to write any data.
The alternative would be to detect such a case and remove all EBs at the
attached time after we processed the volume-table and see the
update-marker set. The patch looks bigger and I doubt it is worth it
since usually the write() will wait from time to time for a new EB since
usually there not that many spare EB that can be used.
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
The latest change to the BUG() macro inadvertently reverted the earlier
commit:
b06dd879f5 ("x86: always define BUG() and HAVE_ARCH_BUG, even with !CONFIG_BUG")
... that sanitized the behavior with CONFIG_BUG=n.
I noticed this as some warnings have appeared again that were previously
fixed as a side effect of that patch:
kernel/seccomp.c: In function '__seccomp_filter':
kernel/seccomp.c:670:1: error: no return statement in function returning non-void [-Werror=return-type]
...
This combines the two patches and uses the ud2 macro to define BUG()
in case of CONFIG_BUG=n.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 9a93848fe7 ("x86/debug: Implement __WARN() using UD0")
Link: http://lkml.kernel.org/r/20170329211646.2707365-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This code seems to be very old and has gotten only minor updates.
It's overcomplicated and has a bunch of comments that are, at best,
of purely historical interest. Nowadays we have a shiny function
probe_kernel_write() that does more or less exactly what we need.
Use it.
I switched the page that we test from swapper_pg_dir to
empty_zero_page because writing zero to empty_zero_page is more
obviously safe than writing to the paging structures. (It's
extremely unlikely that any of this would cause problems in practice
because the write will fail on any supported CPU.)
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/0b9e64ab0236de30e7572213cea77bf95ae2e990.1490831211.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>