Commit graph

678,699 commits

Author SHA1 Message Date
Mintz, Yuval
3981594409 qed: Reduce verbosity of unimplemented MFW messages
Management firmware and driver are meant to be both backward and forward
compatibile with each other.

If a new mangement firmware would work with an older driver,
it's possible that driver would receive indications which are meaningless
to it. That's perfectly acceptible from the firmware part - so no need to
log such messages at default verbosity; That would only serve to confuse
users.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23 11:53:30 -07:00
Mintz, Yuval
1799100207 qed: Correct endian order of MAC passed to MFW
The management firmware is running on a Big Endian processor,
and when running on LE platform HW is configured to swap access
to memory shared between management firmware and driver on
32-bit granulariy.

As a result, for matters of simplicity most of the APIs between
driver and management firmware are based on 32-bit variables.
MAC settings are one exception, as driver needs to fill a byte
array when indicating to management firmware that primary MAC
has changed.
Due to the swap, driver must make sure that the mac that was
provided in byte-order would be translated into native order,
otherwise after the swap the management firmware would read
it swapped.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23 11:53:30 -07:00
Tomer Tayar
2f67af8c59 qed: Pass src/dst sizes when interacting with MFW
The driver interaction with management firmware involves a union
of all the data-members relating to the commands the driver prepares.

Current interface assumes the caller always passes such a union -
but thats cumbersome as well as risky [chancing a stack corruption
in case caller accidentally passes a smaller member instead of union].

Change implementation so that caller could pass a pointer to any
of the members instead of the union.

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23 11:53:29 -07:00
Tomer Tayar
4ed1eea82a qed: Revise MFW command locking
Interaction of driver -> management firmware is based
on a one-pending mailbox [per interface], and various
mailbox commands need to be synchronized.

Current scheme is messy, and there's a difficulty extending
it as it deals differently with various commands as well as
making assumption on the required behavior for load/unload
requests.

Drop the current scheme into a completion-list-based approach;
Each flow would try sending the command when possible,
allowing one flow to complete another flow's completion and
relieve the mailbox before sending its own command.

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23 11:53:29 -07:00
Rob Herring
7d79f6098d ARM: dts: ti: fix PCI bus dtc warnings
dtc recently added PCI bus checks. Fix these warnings.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-23 11:43:32 -07:00
Yegor Yefremov
ce2899428e ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY
Though cpsw doesn't support EEE feature, Atheros 8035 provides
automatic EEE support that is enabled by default. This causes
occasional link drops when link partner also announces EEE support.
These link drops occur on both 100Mbit/s and 1000Mbit/s speeds.
So disable EEE advertising completely.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-23 11:42:55 -07:00
Adam Ford
06e1a5cc57 ARM: dts: OMAP3: Fix MFG ID EEPROM
The manufacturing information is stored in the EEPROM.  This chip
is an AT24C64 not not (nor has it ever been) 24C02.  This patch will
correctly address the EEPROM to read the entire contents and not just
256 bytes (of 0xff).

Fixes: 5e3447a29a ("ARM: dts: LogicPD Torpedo: Add AT24 EEPROM Support")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-23 11:41:51 -07:00
Linus Torvalds
131fbf4f9c Merge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "Zygo tracked down a very old bug with inline compressed extents.

  I didn't tag this one for stable because I want to do individual
  tested backports. It's a little tricky and I'd rather do some extra
  testing on it along the way"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: add missing memset while reading compressed inline extents
  Btrfs: fix regression in lock_delalloc_pages
  btrfs: remove btrfs_err_str function from uapi/linux/btrfs.h
2017-03-23 11:39:33 -07:00
Tony Lindgren
6bff547451 Merge branch 'hwmod-cleanup' into omap-for-v4.12/soc 2017-03-23 11:31:46 -07:00
Linus Torvalds
f341d9f08a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Several netfilter fixes from Pablo and the crew:
      - Handle fragmented packets properly in netfilter conntrack, from
        Florian Westphal.
      - Fix SCTP ICMP packet handling, from Ying Xue.
      - Fix big-endian bug in nftables, from Liping Zhang.
      - Fix alignment of fake conntrack entry, from Steven Rostedt.

 2) Fix feature flags setting in fjes driver, from Taku Izumi.

 3) Openvswitch ipv6 tunnel source address not set properly, from Or
    Gerlitz.

 4) Fix jumbo MTU handling in amd-xgbe driver, from Thomas Lendacky.

 5) sk->sk_frag.page not released properly in some cases, from Eric
    Dumazet.

 6) Fix RTNL deadlocks in nl80211, from Johannes Berg.

 7) Fix erroneous RTNL lockdep splat in crypto, from Herbert Xu.

 8) Cure improper inflight handling during AF_UNIX GC, from Andrey
    Ulanov.

 9) sch_dsmark doesn't write to packet headers properly, from Eric
    Dumazet.

10) Fix SCM_TIMESTAMPING_OPT_STATS handling in TCP, from Soheil Hassas
    Yeganeh.

11) Add some IDs for Motorola qmi_wwan chips, from Tony Lindgren.

12) Fix nametbl deadlock in tipc, from Ying Xue.

13) GRO and LRO packets not counted correctly in mlx5 driver, from Gal
    Pressman.

14) Fix reset of internal PHYs in bcmgenet, from Doug Berger.

15) Fix hashmap allocation handling, from Alexei Starovoitov.

16) nl_fib_input() needs stronger netlink message length checking, from
    Eric Dumazet.

17) Fix double-free of sk->sk_filter during sock clone, from Daniel
    Borkmann.

18) Fix RX checksum offloading in aquantia driver, from Pavel Belous.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits)
  net:ethernet:aquantia: Fix for RX checksum offload.
  amd-xgbe: Fix the ECC-related bit position definitions
  sfc: cleanup a condition in efx_udp_tunnel_del()
  Bluetooth: btqcomsmd: fix compile-test dependency
  inet: frag: release spinlock before calling icmp_send()
  tcp: initialize icsk_ack.lrcvtime at session start time
  genetlink: fix counting regression on ctrl_dumpfamily()
  socket, bpf: fix sk_filter use after free in sk_clone_lock
  ipv4: provide stronger user input validation in nl_fib_input()
  bpf: fix hashmap extra_elems logic
  enic: update enic maintainers
  net: bcmgenet: remove bcmgenet_internal_phy_setup()
  ipv6: make sure to initialize sockc.tsflags before first use
  fjes: Do not load fjes driver if extended socket device is not power on.
  fjes: Do not load fjes driver if system does not have extended socket device.
  net/mlx5e: Count LRO packets correctly
  net/mlx5e: Count GSO packets correctly
  net/mlx5: Increase number of max QPs in default profile
  net/mlx5e: Avoid supporting udp tunnel port ndo for VF reps
  net/mlx5e: Use the proper UAPI values when offloading TC vlan actions
  ...
2017-03-23 11:29:49 -07:00
Arnd Bergmann
ab4949640d reiserfs: avoid a -Wmaybe-uninitialized warning
The latest gcc-7.0.1 snapshot warns about an unintialized variable use:

In file included from fs/reiserfs/lbalance.c:8:0:
fs/reiserfs/lbalance.c: In function 'leaf_item_bottle.isra.3':
fs/reiserfs/reiserfs.h:1279:13: error: '*((void *)&n_ih+8).v' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  v2->v = (v2->v & cpu_to_le64(15ULL << 60)) | cpu_to_le64(offset);
           ~~^~~
fs/reiserfs/reiserfs.h:1279:13: error: '*((void *)&n_ih+8).v' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  v2->v = (v2->v & cpu_to_le64(15ULL << 60)) | cpu_to_le64(offset);

This happens because the offset/type pair that is stored in
ih.key.u.k_offset_v2 is actually uninitialized when we call
set_le_ih_k_offset() and set_le_ih_k_type(). After we have called both,
all data is correct, but the first of the two reads uninitialized data
for the type field and writes it back before it gets overwritten.

This works around the warning by initializing the k_offset_v2 through
the slightly larger memcpy().

[JK: Remove now unused define and make it obvious we initialize the key]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2017-03-23 19:22:15 +01:00
Peter Zijlstra
56222b212e futex: Drop hb->lock before enqueueing on the rtmutex
When PREEMPT_RT_FULL does the spinlock -> rt_mutex substitution the PI
chain code will (falsely) report a deadlock and BUG.

The problem is that it hold hb->lock (now an rt_mutex) while doing
task_blocks_on_rt_mutex on the futex's pi_state::rtmutex. This, when
interleaved just right with futex_unlock_pi() leads it to believe to see an
AB-BA deadlock.

  Task1 (holds rt_mutex,	Task2 (does FUTEX_LOCK_PI)
         does FUTEX_UNLOCK_PI)

				lock hb->lock
				lock rt_mutex (as per start_proxy)
  lock hb->lock

Which is a trivial AB-BA.

It is not an actual deadlock, because it won't be holding hb->lock by the
time it actually blocks on the rt_mutex, but the chainwalk code doesn't
know that and it would be a nightmare to handle this gracefully.

To avoid this problem, do the same as in futex_unlock_pi() and drop
hb->lock after acquiring wait_lock. This still fully serializes against
futex_unlock_pi(), since adding to the wait_list does the very same lock
dance, and removing it holds both locks.

Aside of solving the RT problem this makes the lock and unlock mechanism
symetric and reduces the hb->lock held time.

Reported-and-tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104152.161341537@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:14:59 +01:00
Peter Zijlstra
bebe5b5143 futex: Futex_unlock_pi() determinism
The problem with returning -EAGAIN when the waiter state mismatches is that
it becomes very hard to proof a bounded execution time on the
operation. And seeing that this is a RT operation, this is somewhat
important.

While in practise; given the previous patch; it will be very unlikely to
ever really take more than one or two rounds, proving so becomes rather
hard.

However, now that modifying wait_list is done while holding both hb->lock
and wait_lock, the scenario can be avoided entirely by acquiring wait_lock
while still holding hb-lock. Doing a hand-over, without leaving a hole.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104152.112378812@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:10 +01:00
Peter Zijlstra
cfafcd117d futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()
By changing futex_lock_pi() to use rt_mutex_*_proxy_lock() all wait_list
modifications are done under both hb->lock and wait_lock.

This closes the obvious interleave pattern between futex_lock_pi() and
futex_unlock_pi(), but not entirely so. See below:

Before:

futex_lock_pi()			futex_unlock_pi()
  unlock hb->lock

				  lock hb->lock
				  unlock hb->lock

				  lock rt_mutex->wait_lock
				  unlock rt_mutex_wait_lock
				    -EAGAIN

  lock rt_mutex->wait_lock
  list_add
  unlock rt_mutex->wait_lock

  schedule()

  lock rt_mutex->wait_lock
  list_del
  unlock rt_mutex->wait_lock

				  <idem>
				    -EAGAIN

  lock hb->lock


After:

futex_lock_pi()			futex_unlock_pi()

  lock hb->lock
  lock rt_mutex->wait_lock
  list_add
  unlock rt_mutex->wait_lock
  unlock hb->lock

  schedule()
				  lock hb->lock
				  unlock hb->lock
  lock hb->lock
  lock rt_mutex->wait_lock
  list_del
  unlock rt_mutex->wait_lock

				  lock rt_mutex->wait_lock
				  unlock rt_mutex_wait_lock
				    -EAGAIN

  unlock hb->lock


It does however solve the earlier starvation/live-lock scenario which got
introduced with the -EAGAIN since unlike the before scenario; where the
-EAGAIN happens while futex_unlock_pi() doesn't hold any locks; in the
after scenario it happens while futex_unlock_pi() actually holds a lock,
and then it is serialized on that lock.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104152.062785528@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:09 +01:00
Peter Zijlstra
38d589f2fd futex,rt_mutex: Restructure rt_mutex_finish_proxy_lock()
With the ultimate goal of keeping rt_mutex wait_list and futex_q waiters
consistent it's necessary to split 'rt_mutex_futex_lock()' into finer
parts, such that only the actual blocking can be done without hb->lock
held.

Split split_mutex_finish_proxy_lock() into two parts, one that does the
blocking and one that does remove_waiter() when the lock acquire failed.

When the rtmutex was acquired successfully the waiter can be removed in the
acquisiton path safely, since there is no concurrency on the lock owner.

This means that, except for futex_lock_pi(), all wait_list modifications
are done with both hb->lock and wait_lock held.

[bigeasy@linutronix.de: fix for futex_requeue_pi_signal_restart]

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104152.001659630@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:09 +01:00
Peter Zijlstra
50809358dd futex,rt_mutex: Introduce rt_mutex_init_waiter()
Since there's already two copies of this code, introduce a helper now
before adding a third one.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.950039479@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:09 +01:00
Peter Zijlstra
16ffa12d74 futex: Pull rt_mutex_futex_unlock() out from under hb->lock
There's a number of 'interesting' problems, all caused by holding
hb->lock while doing the rt_mutex_unlock() equivalient.

Notably:

 - a PI inversion on hb->lock; and,

 - a SCHED_DEADLINE crash because of pointer instability.

The previous changes:

 - changed the locking rules to cover {uval,pi_state} with wait_lock.

 - allow to do rt_mutex_futex_unlock() without dropping wait_lock; which in
   turn allows to rely on wait_lock atomicity completely.

 - simplified the waiter conundrum.

It's now sufficient to hold rtmutex::wait_lock and a reference on the
pi_state to protect the state consistency, so hb->lock can be dropped
before calling rt_mutex_futex_unlock().

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.900002056@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:08 +01:00
Peter Zijlstra
73d786bd04 futex: Rework inconsistent rt_mutex/futex_q state
There is a weird state in the futex_unlock_pi() path when it interleaves
with a concurrent futex_lock_pi() at the point where it drops hb->lock.

In this case, it can happen that the rt_mutex wait_list and the futex_q
disagree on pending waiters, in particular rt_mutex will find no pending
waiters where futex_q thinks there are. In this case the rt_mutex unlock
code cannot assign an owner.

The futex side fixup code has to cleanup the inconsistencies with quite a
bunch of interesting corner cases.

Simplify all this by changing wake_futex_pi() to return -EAGAIN when this
situation occurs. This then gives the futex_lock_pi() code the opportunity
to continue and the retried futex_unlock_pi() will now observe a coherent
state.

The only problem is that this breaks RT timeliness guarantees. That
is, consider the following scenario:

  T1 and T2 are both pinned to CPU0. prio(T2) > prio(T1)

    CPU0

    T1
      lock_pi()
      queue_me()  <- Waiter is visible

    preemption

    T2
      unlock_pi()
	loops with -EAGAIN forever

Which is undesirable for PI primitives. Future patches will rectify
this.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.850383690@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:08 +01:00
Peter Zijlstra
bf92cf3a51 futex: Cleanup refcounting
Add a put_pit_state() as counterpart for get_pi_state() so the refcounting
becomes consistent.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.801778516@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:08 +01:00
Peter Zijlstra
734009e96d futex: Change locking rules
Currently futex-pi relies on hb->lock to serialize everything. But hb->lock
creates another set of problems, especially priority inversions on RT where
hb->lock becomes a rt_mutex itself.

The rt_mutex::wait_lock is the most obvious protection for keeping the
futex user space value and the kernel internal pi_state in sync.

Rework and document the locking so rt_mutex::wait_lock is held accross all
operations which modify the user space value and the pi state.

This allows to invoke rt_mutex_unlock() (including deboost) without holding
hb->lock as a next step.

Nothing yet relies on the new locking rules.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.751993333@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:07 +01:00
Peter Zijlstra
5293c2efda futex,rt_mutex: Provide futex specific rt_mutex API
Part of what makes futex_unlock_pi() intricate is that
rt_mutex_futex_unlock() -> rt_mutex_slowunlock() can drop
rt_mutex::wait_lock.

This means it cannot rely on the atomicy of wait_lock, which would be
preferred in order to not rely on hb->lock so much.

The reason rt_mutex_slowunlock() needs to drop wait_lock is because it can
race with the rt_mutex fastpath, however futexes have their own fast path.

Since futexes already have a bunch of separate rt_mutex accessors, complete
that set and implement a rt_mutex variant without fastpath for them.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.702962446@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:07 +01:00
Peter Zijlstra
fffa954fb5 futex: Remove rt_mutex_deadlock_account_*()
These are unused and clutter up the code.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.652692478@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:07 +01:00
Peter Zijlstra
1b367ece0d futex: Use smp_store_release() in mark_wake_futex()
Since the futex_q can dissapear the instruction after assigning NULL,
this really should be a RELEASE barrier. That stops loads from hitting
dead memory too.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.604296452@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:06 +01:00
Peter Zijlstra
499f5aca2c futex: Cleanup variable names for futex_top_waiter()
futex_top_waiter() returns the top-waiter on the pi_mutex. Assinging
this to a variable 'match' totally obscures the code.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.554710645@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23 19:10:06 +01:00
David Hildenbrand
90db10434b KVM: kvm_io_bus_unregister_dev() should never fail
No caller currently checks the return value of
kvm_io_bus_unregister_dev(). This is evil, as all callers silently go on
freeing their device. A stale reference will remain in the io_bus,
getting at least used again, when the iobus gets teared down on
kvm_destroy_vm() - leading to use after free errors.

There is nothing the callers could do, except retrying over and over
again.

So let's simply remove the bus altogether, print an error and make
sure no one can access this broken bus again (returning -ENOMEM on any
attempt to access it).

Fixes: e93f8a0f82 ("KVM: convert io_bus to SRCU")
Cc: stable@vger.kernel.org # 3.4+
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-23 19:02:25 +01:00
Wanpeng Li
08d839c4b1 KVM: VMX: Fix enable VPID conditions
This can be reproduced by running L2 on L1, and disable VPID on L0
if w/o commit "KVM: nVMX: Fix nested VPID vmx exec control", the L2
crash as below:

KVM: entry failed, hardware error 0x7
EAX=00000000 EBX=00000000 ECX=00000000 EDX=000306c3
ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000 00000000 0000ffff 00009300
CS =f000 ffff0000 0000ffff 00009b00
SS =0000 00000000 0000ffff 00009300
DS =0000 00000000 0000ffff 00009300
FS =0000 00000000 0000ffff 00009300
GS =0000 00000000 0000ffff 00009300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT=     00000000 0000ffff
IDT=     00000000 0000ffff
CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000

Reference SDM 30.3 INVVPID:

Protected Mode Exceptions
- #UD
  - If not in VMX operation.
  - If the logical processor does not support VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=0).
  - If the logical processor supports VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=1) but does
    not support the INVVPID instruction (IA32_VMX_EPT_VPID_CAP[32]=0).

So we should check both VPID enable bit in vmx exec control and INVVPID support bit
in vmx capability MSRs to enable VPID. This patch adds the guarantee to not enable
VPID if either INVVPID or single-context/all-context invalidation is not exposed in
vmx capability MSRs.

Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-23 19:02:22 +01:00
Wanpeng Li
63cb6d5f00 KVM: nVMX: Fix nested VPID vmx exec control
This can be reproduced by running kvm-unit-tests/vmx.flat on L0 w/ vpid disabled.

Test suite: VPID
Unhandled exception 6 #UD at ip 00000000004051a6
error_code=0000      rflags=00010047      cs=00000008
rax=0000000000000000 rcx=0000000000000001 rdx=0000000000000047 rbx=0000000000402f79
rbp=0000000000456240 rsi=0000000000000001 rdi=0000000000000000
r8=000000000000000a  r9=00000000000003f8 r10=0000000080010011 r11=0000000000000000
r12=0000000000000003 r13=0000000000000708 r14=0000000000000000 r15=0000000000000000
cr0=0000000080010031 cr2=0000000000000000 cr3=0000000007fff000 cr4=0000000000002020
cr8=0000000000000000
STACK: @4051a6 40523e 400f7f 402059 40028f

We should hide and forbid VPID in L1 if it is disabled on L0. However, nested VPID
enable bit is set unconditionally during setup nested vmx exec controls though VPID
is not exposed through nested VMX capablity. This patch fixes it by don't set nested
VPID enable bit if it is disabled on L0.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5c614b3583 (KVM: nVMX: nested VPID emulation)
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-23 19:02:14 +01:00
Wanpeng Li
24dccf83a1 KVM: x86: correct async page present tracepoint
After async pf setup successfully, there is a broadcast wakeup w/ special
token 0xffffffff which tells vCPU that it should wake up all processes
waiting for APFs though there is no real process waiting at the moment.

The async page present tracepoint print prematurely and fails to catch the
special token setup. This patch fixes it by moving the async page present
tracepoint after the special token setup.

Before patch:

qemu-system-x86-8499  [006] ...1  5973.473292: kvm_async_pf_ready: token 0x0 gva 0x0

After patch:

qemu-system-x86-8499  [006] ...1  5973.473292: kvm_async_pf_ready: token 0xffffffff gva 0x0

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-23 19:02:07 +01:00
Jim Mattson
fb6c819843 kvm: vmx: Flush TLB when the APIC-access address changes
Quoting from the Intel SDM, volume 3, section 28.3.3.4: Guidelines for
Use of the INVEPT Instruction:

If EPT was in use on a logical processor at one time with EPTP X, it
is recommended that software use the INVEPT instruction with the
"single-context" INVEPT type and with EPTP X in the INVEPT descriptor
before a VM entry on the same logical processor that enables EPT with
EPTP X and either (a) the "virtualize APIC accesses" VM-execution
control was changed from 0 to 1; or (b) the value of the APIC-access
address was changed.

In the nested case, the burden falls on L1, unless L0 enables EPT in
vmcs02 when L1 doesn't enable EPT in vmcs12.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-23 19:02:06 +01:00
Peter Xu
c761159cf8 KVM: x86: use pic/ioapic destructor when destroy vm
We have specific destructors for pic/ioapic, we'd better use them when
destroying the VM as well.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-23 19:02:06 +01:00
Peter Xu
950712eb8e KVM: x86: check existance before destroy
Mostly used for split irqchip mode. In that case, these two things are
not inited at all, so no need to release.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-23 19:02:03 +01:00
Koji Matsuoka
8bc4793bd0 [media] soc-camera: fix rectangle adjustment in cropping
update_subrect() adjusts the sub-rectangle to be inside a base area.
It checks width and height to not exceed those of the area, then it
checks the low border (left or top) to lie within the area, then the
high border (right or bottom) to lie there too. This latter check has
a bug, which is fixed by this patch.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[g.liakhovetski@gmx.de: dropped supposedly wrong hunks]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-23 14:45:59 -03:00
Bhumika Goyal
6713c88fd0 [media] media: i2c: soc_camera: constify v4l2_subdev_* structures
v4l2_subdev_{core/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle: (One of the scripts used)

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_video_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
struct v4l2_subdev_ops obj;
@@
obj.video=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_video_ops i;

File sizes before and after the changes:
   text	   data	    bss	    dec	    hex	filename

   3459	    696	      0	   4155	   103b	/media/i2c/soc_camera/imx074.o
   3835	    320	      0	   4155	   103b	/media/i2c/soc_camera/imx074.o

   4749	   1048	      8	   5805	   16ad	/media/i2c/soc_camera/mt9m001.o
   5133	    672	      8	   5813	   16b5	/media/i2c/soc_camera/mt9m001.o

   5658	   1112	      8	   6778	   1a7a	/media/i2c/soc_camera/mt9t031.o
   6042	    728	      8	   6778	   1a7a	/media/i2c/soc_camera/mt9t031.o

   6726	    784	      0	   7510	   1d56	/media/i2c/soc_camera/mt9t112.o
   7110	    408	      0	   7518	   1d5e	/media/i2c/soc_camera/mt9t112.o

   6700	    960	     16	   7676	   1dfc	/media/i2c/soc_camera/mt9v022.o
   7084	    584	     16	   7684	   1e04	/media/i2c/soc_camera/mt9v022.o

   5569	   1576	      8	   7153	   1bf1	/media/i2c/soc_camera/ov2640.o
   5953	   1200	      8	   7161	   1bf9	/media/i2c/soc_camera/ov2640.o

   3018	   2736	      0	   5754	   167a	/media/i2c/soc_camera/ov5642.o
   3394	   2352	      0	   5746	   1672	/media/i2c/soc_camera/ov5642.o

   8348	   2104	      8	  10460	   28dc	/media/i2c/soc_camera/ov6650.o
   8716	   1728	      8	  10452	   28d4	/media/i2c/soc_camera/ov6650.o

   4165	    696	      8	   4869	   1305	/media/i2c/soc_camera/ov772x.o
   4549	    320	      8	   4877	   130d	/media/i2c/soc_camera/ov772x.o

   4033	    608	      8	   4649	   1229	/media/i2c/soc_camera/ov9640.o
   4417	    232	      8	   4657	   1231	/media/i2c/soc_camera/ov9640.o

   4983	    784	      8	   5775	   168f	/media/i2c/soc_camera/ov9740.o
   5367	    408	      8	   5783	   1697	/media/i2c/soc_camera/ov9740.o

   8578	   1312	      8	   9898	   26aa i2c/soc_camera/rj54n1cb0c.o
   8962	    936	      8	   9906	   26b2 i2c/soc_camera/rj54n1cb0c.o

   3886	    696	      0	   4582	   11e6	/media/i2c/soc_camera/tw9910.o
   4270	    320	      0	   4590	   11ee	/media/i2c/soc_camera/tw9910.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-23 14:43:49 -03:00
Geliang Tang
855749a756 [media] sh_mobile_ceu_camera: use module_platform_driver
Use module_platform_driver() helper to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-23 14:40:09 -03:00
Janusz Krzysztofik
54449af0e0 [media] media: i2c/soc_camera: fix ov6650 sensor getting wrong clock
After changes to v4l2_clk API introduced in v4.1 by commits a37462b919
'[media] V4L: remove clock name from v4l2_clk API' and 4f528afcfb
'[media] V4L: add CCF support to the v4l2_clk API', ov6650 sensor
stopped responding because v4l2_clk_get(), still called with
depreciated V4L2 clock name "mclk", started to return respective CCF
clock instead of the V4l2 one registered by soc_camera. Fix it by
calling v4l2_clk_get() with NULL clock name.

Created and tested on Amstrad Delta against Linux-4.7-rc3 with
omap1_camera fixes.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-23 14:39:47 -03:00
Bjorn Helgaas
4bb6669147 PCI/MSI: Use dev_printk() when possible
Use dev_printk() when possible.  This makes messages more consistent with
other device-related messages and, in some cases, adds useful information.
This changes messages like this:

  Unable to allocate affinity masks, ignoring

to this:

  pci 0000:01:00.0: can't allocate MSI affinity masks for 4 vectors

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-23 12:29:56 -05:00
Fabrice Gasnier
d5a7e74461 ARM: dts: stm32: Enable pwm1 and pwm3 on stm32f429i-eval
Define and enable pwm1 and pwm3, timers1 & 3 trigger outputs on
on stm32f429i-eval board.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-23 18:19:14 +01:00
Fabrice Gasnier
bcd9b43eb1 ARM: dts: stm32: Enable dma by default on stm32f4 adc
Configure STM32F4 ADC to use dma by default.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-23 18:19:11 +01:00
Amelie Delaunay
4cc627472c ARM: dts: stm32: enable RTC on stm32746g-eval
This patch enables RTC on stm32746g-eval with default LSE clock source.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-23 18:19:05 +01:00
Amelie Delaunay
859e2647f0 ARM: dts: stm32: Add RTC support for STM32F746 MCU
This patch adds STM32 RTC bindings for STM32F746.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-23 18:19:02 +01:00
Amelie Delaunay
91a7f89c8f ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f746
This patch set HSE_RTC clock frequency to 1 MHz, as the clock supplied to
the RTC must be 1 MHz.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-23 18:18:59 +01:00
Gabriel Fernandez
156fdf11ae dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file
This patch lists STM32F7's RCC numeric constants.
It will be used by clock and reset drivers, and DT bindings.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-23 18:18:36 +01:00
Gabriel Fernandez
01e435d23b ARM: dts: stm32: Enable clocks for STM32F746 MCU
This patch enables clocks for STM32F746 MCU.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-23 18:18:22 +01:00
Thomas Petazzoni
66e5630284 arm64: defconfig: enable MVPP2
The MVPP2 network driver is used for the ARM64 Marvell Armada 7K and 8K
platforms, so enable it in the arm64 defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-03-23 17:50:13 +01:00
Thomas Petazzoni
6089471924 arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K
This commit adds the description of the PPv2.2 hardware block for the
Marvell Armada 7K and Armada 8K processors, and their corresponding Armada
7040 and 8040 Development boards.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-03-23 17:46:23 +01:00
Gregory CLEMENT
85bee2af8a ARM64: dts: marvell: armada-3720 add RTC support
The Armada 3720 DB board has an RTC on the I2C bus. It's a PT7C4337A from
Pericom but which claims to be fully compatible with the ds1337.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-03-23 17:43:51 +01:00
Gregory CLEMENT
a12af1c207 ARM64: dts: marvell: armada-3720-db: Add phy for USB3
Now that the gpio expander is present in the dts, use it to add an USB3
PHY using one of these gpio as a regulator.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-03-23 17:43:06 +01:00
Gregory CLEMENT
e4afb4804d ARM64: dts: marvell: armada-37xx: Add clock resource for USB3
Now that clocks are available provide a clock resource for xhci node.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-03-23 17:43:02 +01:00
Gregory CLEMENT
86fcb2bca0 ARM64: dts: marvell: armada-37xx: Fix interrupt mapping for USB3
IRQ number for xhci controller was wrong, fix it.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-03-23 17:42:58 +01:00
Ralph Sennhauser
cd2f0d0d40 ARM: dts: mvebu: linksys: enable buffer manager support
Add appropriate properties to devices in the Linksys WRT AC Series for the
mvneta driver to use hardware buffer management.

Also update "soc" ranges property and set the status of bm and bm-bppi
to "okay" (SRAM).

Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-03-23 17:29:42 +01:00