Commit graph

678,699 commits

Author SHA1 Message Date
David S. Miller
24d79ce0dc Merge branch 'xgene-v2'
Iyappan Subramanian says:

====================
drivers: net: xgene-v2: Add RGMII based 1G driver

This patch set adds support for RGMII based 1GbE hardware which uses a linked
list of DMA descriptor architecture (v2) for APM X-Gene SoCs.

v4: Address review comments from v3
	- fixed local variable declarations to reverse christmas tree order

v3: Address review comments from v2
	- fixed kbuild warnings (this 'if' clause does not guard)

v2: Address review comments from v1
	- moved create_desc_ring and delete_desc_ring to open() and close()
	  respectively
	- changed to use dma_zalloc APIs
	- fixed tx_timeout()
	- removed tx completion polling upper bound
	- added error checking on rx packets
	- added netif_stop_queue() and netif_wake_queue()

v1:
	- Initial version
====================

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:25:05 -08:00
Iyappan Subramanian
70dbd9b258 MAINTAINERS: Add entry for APM X-Gene SoC Ethernet (v2) driver
This patch adds a MAINTAINERS entry for the ethernet driver for
the on-chip ethernet interface which uses a linked list of DMA
descriptor architecture (v2) for APM X-Gene SoCs.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:25:04 -08:00
Iyappan Subramanian
b105bcdaaa drivers: net: xgene-v2: Add transmit and receive
This patch adds,
    - Transmit
    - Transmit completion poll
    - Receive poll
    - NAPI handler

and enables the driver.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:25:04 -08:00
Iyappan Subramanian
3b3f9a75d9 drivers: net: xgene-v2: Add base driver
This patch adds,

     - probe, remove, shutdown
     - open, close and stats
     - create and delete ring
     - request and delete irq

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:25:04 -08:00
Iyappan Subramanian
272d6dc1fc drivers: net: xgene-v2: Add ethernet hardware configuration
This patch adds functions to configure ethernet hardware.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:25:04 -08:00
Iyappan Subramanian
81ccd0cab2 drivers: net: xgene-v2: Add mac configuration
This patch adds functions to configure and control mac.  This
patch also adds helper functions to get/set registers.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:25:04 -08:00
Iyappan Subramanian
384fe7a4d7 drivers: net: xgene-v2: Add DMA descriptor
This patch adds DMA descriptor setup and interrupt enable/disable
functions.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:25:04 -08:00
Dmitry V. Levin
745cb7f8a5 uapi: fix linux/packet_diag.h userspace compilation error
Replace MAX_ADDR_LEN with its numeric value to fix the following
linux/packet_diag.h userspace compilation error:

/usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function)
  __u8 pdmc_addr[MAX_ADDR_LEN];

This is not the first case in the UAPI where the numeric value
of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h
already does the same:

$ grep MAX_ADDR_LEN include/uapi/linux/if_link.h
	__u8 mac[32]; /* MAX_ADDR_LEN */

There are no UAPI headers besides these two that use MAX_ADDR_LEN.

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:22:28 -08:00
Rick Farrington
35ae57eae9 liquidio: add support for XPS
Add support for XPS.

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:21:17 -08:00
Paolo Abeni
294acf1c01 net/tunnel: set inner protocol in network gro hooks
The gso code of several tunnels type (gre and udp tunnels)
takes for granted that the skb->inner_protocol is properly
initialized and drops the packet elsewhere.

On the forwarding path no one is initializing such field,
so gro encapsulated packets are dropped on forward.

Since commit 3872035241 ("gre: Use inner_proto to obtain
inner header protocol"), this can be reproduced when the
encapsulated packets use gre as the tunneling protocol.

The issue happens also with vxlan and geneve tunnels since
commit 8bce6d7d0d ("udp: Generalize skb_udp_segment"), if the
forwarding host's ingress nic has h/w offload for such tunnel
and a vxlan/geneve device is configured on top of it, regardless
of the configured peer address and vni.

To address the issue, this change initialize the inner_protocol
field for encapsulated packets in both ipv4 and ipv6 gro complete
callbacks.

Fixes: 3872035241 ("gre: Use inner_proto to obtain inner header protocol")
Fixes: 8bce6d7d0d ("udp: Generalize skb_udp_segment")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:19:52 -08:00
robert.foss@collabora.com
8aad6f14c0 qed: Fix copy of uninitialized memory
In qed_ll2_start_ooo() the ll2_info variable is uninitialized and then
passed to qed_ll2_acquire_connection() where it is copied into a new
memory space.

This shouldn't cause any issue as long as non of the copied memory is
every read.
But the potential for a bug being introduced by reading this memory
is real.

Detected by CoverityScan, CID#1399632 ("Uninitialized scalar variable")

Signed-off-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:18:09 -08:00
Joao Pinto
64f48e593a net: stmicro: replace kzalloc with devm_kzalloc
The axi variable was not being freed upon device removal.
With devm_kzalloc it ensures that it is properly freed.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:17:08 -08:00
Tobias Klauser
e3c36e483b net: mediatek: Use eth_hw_addr_random()
Use eth_hw_addr_random() to set a random dev_addr and update
addr_assign_type instead of open-coding it.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:16:34 -08:00
David S. Miller
c021aaca5f Merge branch 'thunderx-misc-fixes'
Sunil Goutham says:

====================
net: thunderx: Miscellaneous fixes

This patch set fixes multiple issues such as IOMMU
translation faults when kernel is booted with IOMMU enabled
on host, incorrect MAC ID reading from ACPI tables and IPv6
UDP packet drop due to failure of checksum validation.

Changes from v1:
- As suggested by David Miller, got rid of conditional
  calling of DMA map/unmap APIs. Also updated commit message
  in 'IOMMU translation faults' patch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:12:42 -08:00
Thanneeru Srinivasulu
36fa35d22b net: thunderx: Allow IPv6 frames with zero UDP checksum
Do not consider IPv6 frames with zero UDP checksum as frames
with bad checksum and drop them.

Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:12:41 -08:00
Sunil Goutham
78aacb6f6e net: thunderx: Fix invalid mac addresses for node1 interfaces
When booted with ACPI, random mac addresses are being
assigned to node1 interfaces due to mismatch of bgx_id
in BGX driver and ACPI tables.

This patch fixes this issue by setting maximum BGX devices
per node based on platform/soc instead of a macro. This
change will set the bgx_id appropriately.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:12:41 -08:00
Sunil Goutham
18de7ba95f net: thunderx: Fix LMAC mode debug prints for QSGMII mode
When BGX/LMACs are in QSGMII mode, for some LMACs, mode info is
not being printed. This patch will fix that. With changes already
done to not do any sort of serdes 2 lane mapping config calculation
in kernel driver, we can get rid of this logic.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:12:41 -08:00
Sunil Goutham
83abb7d7c9 net: thunderx: Fix IOMMU translation faults
ACPI support has been added to ARM IOMMU driver in 4.10 kernel
and that has resulted in VNIC interfaces throwing translation
faults when kernel is booted with ACPI as driver was not using
DMA API. This patch fixes the issue by using DMA API which inturn
will create translation tables when IOMMU is enabled.

Also VNIC doesn't have a seperate receive buffer ring per receive
queue, so there is no 1:1 descriptor index matching between CQE_RX
and the index in buffer ring from where a buffer has been used for
DMA'ing. Unlike other NICs, here it's not possible to maintain dma
address to virt address mappings within the driver. This leaves us
no other choice but to use IOMMU's IOVA address conversion API to
get buffer's virtual address which can be given to network stack
for processing.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:12:41 -08:00
Zhu Yanjun
3b12f73a5c rds: ib: add error handle
In the function rds_ib_setup_qp, the error handle is missing. When some
error occurs, it is possible that memory leak occurs. As such, error
handle is added.

Cc: Joe Jin <joe.jin@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Guanglei Li <guanglei.li@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:09:18 -08:00
VSR Burru
67e303e0c7 liquidio: improve UDP TX performance
Improve UDP TX performance by:
* reducing the ring size from 2K to 512
* replacing the numerous streaming DMA allocations for info buffers and
  gather lists with one large consistent DMA allocation per ring

BQL is not effective here.  We reduced the ring size because there is heavy
overhead with dma_map_single every so often.  With iommu=on, dma_map_single
in PF Tx data path was taking longer time (~700usec) for every ~250
packets.  Debugged intel_iommu code, and found that PF driver is utilizing
too many static IO virtual address mapping entries (for gather list entries
and info buffers): about 100K entries for two PF's each using 8 rings.
Also, finding an empty entry (in rbtree of device domain's iova mapping in
kernel) during Tx path becomes a bottleneck every so often; the loop to
find the empty entry goes through over 40K iterations; this is too costly
and was the major overhead.  Overhead is low when this loop quits quickly.

Netperf benchmark numbers before and after patch:

PF UDP TX
+--------+--------+------------+------------+---------+
|        |        |  Before    |  After     |         |
| Number |        |  Patch     |  Patch     |         |
|  of    | Packet | Throughput | Throughput | Percent |
| Flows  |  Size  |  (Gbps)    |  (Gbps)    | Change  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.52     |   0.93     |  +78.9  |
|   1    |  1024  |   1.62     |   2.84     |  +75.3  |
|        |  1518  |   2.44     |   4.21     |  +72.5  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.45     |   1.59     | +253.3  |
|   4    |  1024  |   1.34     |   5.48     | +308.9  |
|        |  1518  |   2.27     |   8.31     | +266.1  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.40     |   1.61     | +302.5  |
|   8    |  1024  |   1.64     |   4.24     | +158.5  |
|        |  1518  |   2.87     |   6.52     | +127.2  |
+--------+--------+------------+------------+---------+

VF UDP TX
+--------+--------+------------+------------+---------+
|        |        |  Before    |  After     |         |
| Number |        |  Patch     |  Patch     |         |
|  of    | Packet | Throughput | Throughput | Percent |
| Flows  |  Size  |  (Gbps)    |  (Gbps)    | Change  |
+--------+--------+------------+------------+---------+
|        |   360  |   1.28     |   1.49     |  +16.4  |
|   1    |  1024  |   4.44     |   4.39     |   -1.1  |
|        |  1518  |   6.08     |   6.51     |   +7.1  |
+--------+--------+------------+------------+---------+
|        |   360  |   2.35     |   2.35     |    0.0  |
|   4    |  1024  |   6.41     |   8.07     |  +25.9  |
|        |  1518  |   9.56     |   9.54     |   -0.2  |
+--------+--------+------------+------------+---------+
|        |   360  |   3.41     |   3.65     |   +7.0  |
|   8    |  1024  |   9.35     |   9.34     |   -0.1  |
|        |  1518  |   9.56     |   9.57     |   +0.1  |
+--------+--------+------------+------------+---------+

Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:07:00 -08:00
David Ahern
5be083cedc net: ipv6: Remove redundant RTA_OIF in multipath routes
Dinesh reported that RTA_MULTIPATH nexthops are 8-bytes larger with IPv6
than IPv4. The recent refactoring for multipath support in netlink
messages does discriminate between non-multipath which needs the OIF
and multipath which adds a rtnexthop struct for each hop making the
RTA_OIF attribute redundant. Resolve by adding a flag to the info
function to skip the oif for multipath.

Fixes: beb1afac51 ("net: ipv6: Add support to dump multipath routes
       via RTA_MULTIPATH attribute")
Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:04:48 -08:00
Florian Fainelli
038e893d78 tg3: Add the ability to conditionally build w/ HWMON
Introduce a Kconfig option: CONFIG_TIGON3_HWMON which allows to build
in/out support for thermal sensors reported by Tigon3 NICs.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 13:03:00 -08:00
Prarit Bhargava
fda78d7a0e PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()
The pci_bus_type .shutdown method, pci_device_shutdown(), is called from
device_shutdown() in the kernel restart and shutdown paths.

Previously, pci_device_shutdown() called pci_msi_shutdown() and
pci_msix_shutdown().  This disables MSI and MSI-X, which causes the device
to fall back to raising interrupts via INTx.  But the driver is still bound
to the device, it doesn't know about this change, and it likely doesn't
have an INTx handler, so these INTx interrupts cause "nobody cared"
warnings like this:

  irq 16: nobody cared (try booting with the "irqpoll" option)
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.2-1.el7_UNSUPPORTED.x86_64 #1
  Hardware name: Hewlett-Packard HP Z820 Workstation/158B, BIOS J63 v03.90 06/
  ...

The MSI disabling code was added by d52877c7b1 ("pci/irq: let
pci_device_shutdown to call pci_msi_shutdown v2") because a driver left MSI
enabled and kdump failed because the kexeced kernel wasn't prepared to
receive the MSI interrupts.

Subsequent commits 1851617cd2 ("PCI/MSI: Disable MSI at enumeration even
if kernel doesn't support MSI") and  e80e7edc55 ("PCI/MSI: Initialize MSI
capability for all architectures") changed the kexeced kernel to disable
all MSIs itself so it no longer depends on the crashed kernel to clean up
after itself.

Stop disabling MSI/MSI-X in pci_device_shutdown().  This resolves the
"nobody cared" unhandled IRQ issue above.  It also allows PCI serial
devices, which may rely on the MSI interrupts, to continue outputting
messages during reboot/shutdown.

[bhelgaas: changelog, drop pci_msi_shutdown() and pci_msix_shutdown() calls
altogether]
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=187351
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: David Arcari <darcari@redhat.com>
CC: Myron Stowe <mstowe@redhat.com>
CC: Lukas Wunner <lukas@wunner.de>
CC: Keith Busch <keith.busch@intel.com>
CC: Mika Westerberg <mika.westerberg@linux.intel.com>
2017-03-09 14:56:10 -06:00
Linus Torvalds
cb2113cb98 features and fixes for 4.11 rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJYwPOdAAoJELDendYovxMvaREH/jWjZt38HQFyWYmpGN/jTl5e
 fl2kK8PcYR50WDVMROG50MoWeDWj4OiCHkQTln/BIckBfi895qNE+S27Z6ZvPBcY
 Xqx+lbcKej1KU5O11Kmmuz7Jz/h3pyP09lY7vG50pxLMBVJy8L2P3Oj66fB4MbY0
 u5DQtPSwRDlf86gNisQuRHDYIF+LZ+ZQD5SL0hRz5UStnxojbX0oxP/ijz/tyshP
 Qk5PZXWLOTcWn8mvKJu9wqfNur9FLT+FE8dYzAqa8hoLECl3wR3jUxGb1kNVt+GB
 GuK6AHtJ7plVjfMYaAJtjYJnBaCGTCt3GuSzGJhoES0RkC/u1knuQBe87hKhzCc=
 =gYGK
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fix and cleanup from Juergen Gross:
 "This contains one fix for MSIX handling under Xen and a trivial
  cleanup patch"

* tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xenbus: Remove duplicate inclusion of linux/init.h
  xen: do not re-use pirq number cached in pci device msi msg data
2017-03-09 12:23:30 -08:00
Kinglong Mee
5427290d64 SUNRPC/backchanel: set XPT_CONG_CTRL flag for bc xprt
The xprt for backchannel is created separately, not in TCP/UDP code.  It
needs the XPT_CONG_CTRL flag set on it too--otherwise requests on the
NFSv4.1 backchannel are rjected in svc_process_common():

1191         if (versp->vs_need_cong_ctrl &&
1192             !test_bit(XPT_CONG_CTRL, &rqstp->rq_xprt->xpt_flags))
1193                 goto err_bad_vers;

Fixes: 5283b03ee5 ("nfs/nfsd/sunrpc: enforce transport...")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-03-09 15:20:46 -05:00
Rafał Miłecki
0b660259e9 ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger
Such a trigger doesn't exist in Linux and is not needed as LED is being
turned off by default. This could cause errors in LEDs core code when
trying to set default trigger.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-03-09 12:17:18 -08:00
Rafał Miłecki
820a3e952b ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger
Such a trigger doesn't exist in Linux and is not needed as LED is being
turned off by default. This could cause errors in LEDs core code when
trying to set default trigger.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-03-09 12:16:47 -08:00
Kirill A. Shutemov
90eceff1a3 mm: introduce __p4d_alloc()
For full 5-level paging we need a helper to allocate p4d page table.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 11:48:48 -08:00
Kirill A. Shutemov
c2febafc67 mm: convert generic code to 5-level paging
Convert all non-architecture-specific code to 5-level paging.

It's mostly mechanical adding handling one more page table level in
places where we deal with pud_t.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 11:48:47 -08:00
Kirill A. Shutemov
048456dcf2 asm-generic: introduce <asm-generic/pgtable-nop4d.h>
Like with pgtable-nopud.h for 4-level paging, this new header is base
for converting an architectures to properly folded p4d_t level.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 11:48:47 -08:00
Kirill A. Shutemov
9849a5697d arch, mm: convert all architectures to use 5level-fixup.h
If an architecture uses 4level-fixup.h we don't need to do anything as
it includes 5level-fixup.h.

If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK
before inclusion of the header. It makes asm-generic code to use
5level-fixup.h.

If an architecture has 4-level paging or folds levels on its own,
include 5level-fixup.h directly.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 11:48:47 -08:00
Kirill A. Shutemov
30ec842660 asm-generic: introduce __ARCH_USE_5LEVEL_HACK
We are going to introduce <asm-generic/pgtable-nop4d.h> to provide
abstraction for properly (in opposite to 5level-fixup.h hack) folded
p4d level. The new header will be included from pgtable-nopud.h.

If an architecture uses <asm-generic/nop*d.h>, we cannot use
5level-fixup.h directly to quickly convert the architecture to 5-level
paging as it would conflict with pgtable-nop4d.h.

With this patch an architecture can define __ARCH_USE_5LEVEL_HACK before
inclusion <asm-genenric/nop*d.h> to use 5level-fixup.h.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 11:48:47 -08:00
Kirill A. Shutemov
505a60e225 asm-generic: introduce 5level-fixup.h
We are going to switch core MM to 5-level paging abstraction.

This is preparation step which adds <asm-generic/5level-fixup.h>
As with 4level-fixup.h, the new header allows quickly make all
architectures compatible with 5-level paging in core MM.

In long run we would like to switch architectures to properly folded p4d
level by using <asm-generic/pgtable-nop4d.h>, but it requires more
changes to arch-specific code.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 11:48:47 -08:00
Kirill A. Shutemov
6fb895692a x86/cpufeature: Add 5-level paging detection
Look for 'la57' in /proc/cpuinfo to see if your machine supports 5-level
paging.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 11:48:47 -08:00
Michael Sartain
4da14d5922 staging: greybus: firmware: Convert sscanf calls to strtoul
Also convert the fw_update_type and fw_timeout variables to
unsigned and update the printf specifier to %u.

The FW_MGMT_IOC_SET_TIMEOUT_MS ioctl takes an unsigned int
and checkpatch was complaining about not checking the sscanf
return values.

Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Acked-by: Viresh Kumar <viresh.kumar at linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:29:50 +01:00
Michael Sartain
afb5fdfc12 staging: greybus: firmware: Change long long unsigned to unsigned long long
Fixes checkpatch warning:
  type 'long long unsigned int' should be specified
  in [[un]signed] [short|int|long|long long] order

Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Acked-by: Viresh Kumar <viresh.kumar at linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:29:50 +01:00
Michael Sartain
5099c4c4a6 staging: greybus: firmware: Remove extra braces from single line if
Fixes checkpatch warning:
  braces {} are not necessary for any arm of this statement

Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Acked-by: Viresh Kumar <viresh.kumar at linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:29:50 +01:00
Michael Sartain
0c3801875c staging: greybus: firmware: Remove trailing semicolon from FW_TIMEOUT_DEFAULT
Fixes checkpatch warning:
  macros should not use a trailing semicolon

Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Acked-by: Viresh Kumar <viresh.kumar at linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:29:50 +01:00
Narcisa Ana Maria Vasile
001943e8ea staging: vc04_services: Refactor conditionals
Refactor conditionals to reduce one level of indentation and improve
code readability.

Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:27:28 +01:00
Narcisa Ana Maria Vasile
418314821b staging: vc04_services: Remove error message on kmalloc() failure
Remove 'Out of memory' message because kmalloc already prints a message
in case of error.

Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:27:28 +01:00
David S. Miller
9c13e8d0c2 Merge branch 'mvpp2-add-initial-support-for-PPv2.2'
Thomas Petazzoni says:

====================
net: mvpp2: add initial support for PPv2.2

The goal of this patch series is to add basic support for PPv2.2 in
the existing mvpp2 driver. mvpp2 currently supported the PPv2.1
version of the IP, used in the 32 bits Marvell Armada 375 SoC. PPv2.2
is an evolution of this IP block, used in the 64 bits Marvell Armada
7K/8K SoCs.

In order to ease the review, the introduction of PPv2.2 support has
been made into multiple small commits, with the final commit adding
the compatible string that makes the PPv2.2 support actually
usable. The series remain fully bisectable.

People interested in testing the code will find the full series (plus
a few Device Tree patches) at:

  https://github.com/MISL-EBU-System-SW/mainline-public/tree/4.11/mvpp2.2-support-v3

I'd like to thank Stefan Chulski and Marcin Wojtas, who helped me a
lot in the development of this patch series, by reviewing the patches,
and giving lots of useful hints to debug the driver on PPv2.2. Thanks
as well to Russell King for reviewing previous iterations of this
series, and providing suggestions and fixes.

Changes between v2 and v3:

 - Rebased on v4.11-rc1.

 - Add patch "net: mvpp2: fix DMA address calculation in
   mvpp2_txq_inc_put()", to properly take into account the "packet
   offset" field of the TX descriptors. Without this, we were getting
   DMA_API_DEBUG warnings that we are unmapping DMA mappings with a
   non-mapped DMA address.

 - In patch "net: mvpp2: add and use accessors for TX/RX descriptors",
   add a function named mvpp2_txdesc_offset_get(), which is needed for
   the DMA address calculation fix.

 - In patch "net: mvpp2: add and use accessors for TX/RX descriptors",
   fix the calculation of tx_desc physical address and packet offset
   in mvpp2_tx_frag_process(). The offset was assigned into the buffer
   physical address, and the physical address to the packet offset,
   which meant the fragment process was completely broken.

 - In patch "net: mvpp2: adjust the allocation/free of BM pools for
   PPv2.2" fix how MVPP22_BM_ADDR_HIGH_VIRT_RLS_MASK is used. This
   mask is already shifted. So the value should be shifted before
   being masked and not the opposite.

 - Add a new patch "net: mvpp2: set dma mask and coherent dma mask on
   PPv2.2", to set the DMA mask and DMA coherent mask. By setting the
   DMA mask to 40 bits we avoid using bounce buffers when network
   packets are above the 4 GB limit. The coherent mask remains set to
   32 bits, because the BM pools must all have the same high 32 bits
   in their addresses.

 - Use "dma" instead of "phys" where appropriate, as suggested by
   Russell King.

 - Use the "cookie" field of the RX descriptor to store the physical
   address instead of the virtual address, and then use phys_to_virt()
   to get the virtual address. This allows to work around the limit
   that the "cookie" field only has 40 bits, which is not sufficient
   to store a virtual address on 64 bits platforms. This was suggested
   by Russell King.

   As part of this change, also got rid of all the compile time
   conditionals on CONFIG_ARCH_DMA_ADDR_T_64BIT, to get better
   compile-time coverage.

 - In patch "net: mvpp2: handle misc PPv2.1/PPv2.2 differences":

    * Instead of calling mvpp21_port_power_up(port) only on PPv2.1,
      remove this function, and call its relevant parts directly from
      ->probe(). Only mvpp2_port_fc_adv_enable() is PPv2.1
      specific. Reported by Russell King.

    * Add a mvpp22_port_mii_set() function that properly initializes
      SGMII support on PPv2.2. Code provided by Russell King.

 - In patch "net: mvpp2: handle register mapping and access for PPv2.2":

    * Adjust the code to match the change of the DT binding in terms
      of mapping the second register area on PPv2.2.

    * Rework the register accessors to remove the get_cpu()/put_cpu(),
      and instead use separate accessors for global registers
      vs. per-CPU registers.

 - Add a few new patches removing dead/unused/useless code:

   net: mvpp2: remove support for buffer header
   net: mvpp2: remove unused register definition MVPP2_TXQ_THRESH_REG
   net: mvpp2: remove mvpp2_txq_pend_desc_num_get() function

 - Fix a number of checkpatch warnings.

Changes between v1 and v2:

 - Made a separate series from the set of patches doing preparation
   changes/fixes to the mvpp2 driver.

 - Rebased on top of v4.10-rc1.

 - Update Kconfig text of the mvpp2 driver to mention the support for
   Armada 7K and 8K (PPv2.2).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:14 -08:00
Thomas Petazzoni
fc5e1550e5 net: mvpp2: finally add the PPv2.2 compatible string
Now that the mvpp2 driver has been modified to accommodate the support
for PPv2.2, we can finally advertise this support by adding the
appropriate compatible string.

At the same time, we update the Kconfig description of the MVPP2 driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
2067e0a13c net: mvpp2: set dma mask and coherent dma mask on PPv2.2
On PPv2.2, the streaming mappings can be anywhere in the first 40 bits
of the physical address space. However, for the coherent mappings, we
still need them to be in the first 32 bits of the address space,
because all BM pools share a single register to store the high 32 bits
of the BM pool address, which means all BM pools must be allocated in
the same 4GB memory area.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
fceb55d415 net: mvpp2: add support for an additional clock needed for PPv2.2
The PPv2.2 variant of the network controller needs an additional
clock, the "MG clock" in order for the IP block to operate
properly. This commit adds support for this additional clock to the
driver, reworking as needed the error handling path.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
59b9a31ede net: mvpp2: adapt rxq distribution to PPv2.2
In PPv2.1, we have a maximum of 8 RXQs per port, with a default of 4
RXQs per port, and we were assigning RXQs 0->3 to the first port, 4->7
to the second port, 8->11 to the third port, etc.

In PPv2.2, we have a maximum of 32 RXQs per port, and we must allocate
RXQs from the range of 32 RXQs available for each port. So port 0 must
use RXQs in the range 0->31, port 1 in the range 32->63, etc.

This commit adapts the mvpp2 to this difference between PPv2.1 and
PPv2.2:

 - The constant definition MVPP2_MAX_RXQ is replaced by a new field
   'max_port_rxqs' in 'struct mvpp2', which stores the maximum number of
   RXQs per port. This field is initialized during ->probe() depending
   on the IP version.

 - MVPP2_RXQ_TOTAL_NUM is removed, and instead we calculate the total
   number of RXQs by multiplying the number of ports by the maximum of
   RXQs per port. This was anyway used in only one place.

 - In mvpp2_port_probe(), the calculation of port->first_rxq is adjusted
   to cope with the different allocation strategy between PPv2.1 and
   PPv2.2. Due to this change, the 'next_first_rxq' argument of this
   function is no longer needed and is removed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
a73fef1002 net: mvpp2: rework RXQ interrupt group initialization for PPv2.2
This commit adjusts how the MVPP2_ISR_RXQ_GROUP_REG register is
configured, since it changed between PPv2.1 and PPv2.2.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
6763ce3127 net: mvpp2: add AXI bridge initialization for PPv2.2
The PPv2.2 unit is connected to an AXI bus on Armada 7K/8K, so this
commit adds the necessary initialization of the AXI bridge.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
2697582144 net: mvpp2: handle misc PPv2.1/PPv2.2 differences
This commit handles a few miscellaneous differences between PPv2.1 and
PPv2.2 in different areas, where code done for PPv2.1 doesn't apply for
PPv2.2 or needs to be adjusted (getting the MAC address, disabling PHY
polling, etc.).

Thanks to Russell King for providing the initial implementation of
mvpp22_port_mii_set().

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
a786841df7 net: mvpp2: handle register mapping and access for PPv2.2
This commit adjusts the mvpp2 driver register mapping and access logic
to support PPv2.2, to handle a number of differences.

Due to how the registers are laid out in memory, the Device Tree binding
for the "reg" property is different:

 - On PPv2.1, we had a first area for the packet processor
   registers (common to all ports), and then one area per port.

 - On PPv2.2, we have a first area for the packet processor
   registers (common to all ports), and a second area for numerous other
   registers, including a large number of per-port registers

In addition, on PPv2.2, the area for the common registers is split into
so-called "address spaces" of 64 KB each. They allow to access per-CPU
registers, where each CPU has its own copy of some registers. A few
other registers, which have a single copy, also need to be accessed from
those per-CPU windows if they are related to a per-CPU register. For
example:

  - Writing to MVPP2_TXQ_NUM_REG selects a TX queue. This register is a
    per-CPU register, it must be accessed from the current CPU register
    window.

  - Then a write to MVPP2_TXQ_PENDING_REG, MVPP2_TXQ_DESC_ADDR_REG (and
    a few others) will affect the TX queue that was selected by the
    write to MVPP2_TXQ_NUM_REG. It must be accessed from the same CPU
    window as the write to the TXQ_NUM_REG.

Therefore, the ->base member of 'struct mvpp2' is replaced with a
->cpu_base[] array, each entry pointing to a mapping of the per-CPU
area. Since PPv2.1 doesn't have this concept of per-CPU windows, all
entries in ->cpu_base[] point to the same io-remapped area.

The existing mvpp2_read() and mvpp2_write() accessors use cpu_base[0],
they are used for registers for which the CPU window doesn't matter.

mvpp2_percpu_read() and mvpp2_percpu_write() are new accessors added to
access the registers for which the CPU window does matter, which is why
they take a "cpu" as argument.

The driver is then changed to use mvpp2_percpu_read() and
mvpp2_percpu_write() where it matters.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
b02f31fbf9 net: mvpp2: adjust mvpp2_{rxq, txq}_init for PPv2.2
In PPv2.2, the MVPP2_RXQ_DESC_ADDR_REG and MVPP2_TXQ_DESC_ADDR_REG
registers have a slightly different layout, because they need to contain
a 64-bit address for the RX and TX descriptor arrays. This commit
adjusts those functions accordingly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00