Commit graph

678,699 commits

Author SHA1 Message Date
Paolo Bonzini
0ad3bed6c5 kvm: nVMX: move nested events check to kvm_vcpu_running
vcpu_run calls kvm_vcpu_running, not kvm_arch_vcpu_runnable,
and the former does not call check_nested_events.

Once KVM_REQ_EVENT is removed from the APICv interrupt injection
path, however, this would leave no place to trigger a vmexit
from L2 to L1, causing a missed interrupt delivery while in guest
mode.  This is caught by the "ack interrupt on exit" test in
vmx.flat.

[This does not change the calls to check_nested_events in
 inject_pending_event.  That is material for a separate cleanup.]

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-15 14:54:33 +01:00
Paolo Bonzini
967235d320 KVM: vmx: clear pending interrupts on KVM_SET_LAPIC
Pending interrupts might be in the PI descriptor when the
LAPIC is restored from an external state; we do not want
them to be injected.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-15 14:54:33 +01:00
Paolo Bonzini
db1c056cee kvm: vmx: Use the hardware provided GPA instead of page walk
As in the SVM patch, the guest physical address is passed by
VMX to x86_emulate_instruction already, so mark the GPA as available
in vcpu->arch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-15 14:54:32 +01:00
Maarten Lankhorst
1592364de3 drm: Resurrect atomic rmfb code, v3
This was somehow lost between v3 and the merged version in Maarten's
patch merged as:

commit f2d580b9a8
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Wed May 4 14:38:26 2016 +0200

    drm/core: Do not preserve framebuffer on rmfb, v4.

This introduces a slight behavioral change to rmfb. Instead of
disabling a crtc when the primary plane is disabled, we try to
preserve it.

Apart from old versions of the vmwgfx xorg driver, there is
nothing depending on rmfb disabling a crtc. Since vmwgfx is
a legacy driver we can safely only disable the plane with atomic.

If this commit is rejected by the driver then we will still fall
back to the old behavior and turn off the crtc.

v2:
- Remove plane->fb assignment, done by drm_atomic_clean_old_fb.
- Add WARN_ON when atomic_remove_fb fails.
- Always call drm_atomic_state_put.
v3:
- Use drm_drv_uses_atomic_modeset
- Handle the case where the first plane-disable-only commit fails
  with -EINVAL. Some drivers do not support this, fall back to
  disabling all crtc's in this case.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/66fc3da5-697b-1613-0a67-a5293209f0dc@linux.intel.com
2017-02-15 15:40:57 +02:00
Arnaldo Carvalho de Melo
b30a7d1fc9 perf pmu: Fix check for unset alias->unit array
The alias->unit field is an array, so to check that it is not set we
should see if it is an empty string, i.e. alias->unit[0], instead of
checking alias->unit != NULL, as this will _always_ evaluate to 'true'.

Pointed out by clang.

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170214182435.GD4458@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-15 10:06:20 -03:00
Mark Rutland
ffe7afd171 arm64/kprobes: consistently handle MRS/MSR with XZR
Now that we have XZR-safe helpers for fiddling with registers, use these
in the arm64 kprobes code rather than open-coding the logic.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15 12:20:29 +00:00
Mark Rutland
521c646108 arm64: cpufeature: correctly handle MRS to XZR
In emulate_mrs() we may erroneously write back to the user SP rather
than XZR if we trap an MRS instruction where Xt == 31.

Use the new pt_regs_write_reg() helper to handle this correctly.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 77c97b4ee2 ("arm64: cpufeature: Expose CPUID registers by emulation")
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15 12:20:29 +00:00
Mark Rutland
8b6e70fccf arm64: traps: correctly handle MRS/MSR with XZR
Currently we hand-roll XZR-safe register handling in
user_cache_maint_handler(), though we forget to do the same in
ctr_read_handler(), and may erroneously write back to the user SP rather
than XZR.

Use the new helpers to handle these cases correctly and consistently.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 116c81f427 ("arm64: Work around systems with mismatched cache line sizes")
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15 12:20:29 +00:00
Mark Rutland
6c23e2ff70 arm64: ptrace: add XZR-safe regs accessors
In A64, XZR and the SP share the same encoding (31), and whether an
instruction accesses XZR or SP for a particular register parameter
depends on the definition of the instruction.

We store the SP in pt_regs::regs[31], and thus when emulating
instructions, we must be careful to not erroneously read from or write
back to the saved SP. Unfortunately, we often fail to be this careful.

In all cases, instructions using a transfer register parameter Xt use
this to refer to XZR rather than SP. This patch adds helpers so that we
can more easily and consistently handle these cases.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15 12:20:29 +00:00
Arnd Bergmann
f705d95463 arm64: include asm/assembler.h in entry-ftrace.S
In a randconfig build I ran into this build error:

arch/arm64/kernel/entry-ftrace.S: Assembler messages:
arch/arm64/kernel/entry-ftrace.S:101: Error: unknown mnemonic `ldr_l' -- `ldr_l x2,ftrace_trace_function'

The macro is defined in asm/assembler.h, so we should include that file.

Fixes: 829d2bd133 ("arm64: entry-ftrace.S: avoid open-coded {adr,ldr}_l")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15 11:34:25 +00:00
Arnd Bergmann
12f043ff2b arm64: fix warning about swapper_pg_dir overflow
With 4 levels of 16KB pages, we get this warning about the fact that we are
copying a whole page into an array that is declared as having only two pointers
for the top level of the page table:

arch/arm64/mm/mmu.c: In function 'paging_init':
arch/arm64/mm/mmu.c:528:2: error: 'memcpy' writing 16384 bytes into a region of size 16 overflows the destination [-Werror=stringop-overflow=]

This is harmless since we actually reserve a whole page in the definition of the
array that comes from, and just the extern declaration is short. The pgdir
is initialized to zero either way, so copying the actual entries here seems
like the best solution.

Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-15 11:32:18 +00:00
Paolo Bonzini
ee10689117 Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
This brings in two fixes for potential host crashes, from Ben
Herrenschmidt and Nick Piggin.
2017-02-15 12:30:20 +01:00
Rashmica Gupta
10d4cf188a powerpc/asm: Define STACK_PT_REGS_OFFSET macro in asm-offsets.c
There are quite a few entries in asm-offests.c which look like:

  DEFINE(REG, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, reg));

So define a macro to do it once.

Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
[mpe: Rename to STACK_PT_REGS_OFFSET for excruciating explicitness]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15 21:47:51 +11:00
Sergey Senozhatsky
f222449c9d timekeeping: Use deferred printk() in debug code
We cannot do printk() from tk_debug_account_sleep_time(), because
tk_debug_account_sleep_time() is called under tk_core seq lock.
The reason why printk() is unsafe there is that console_sem may
invoke scheduler (up()->wake_up_process()->activate_task()), which,
in turn, can return back to timekeeping code, for instance, via
get_time()->ktime_get(), deadlocking the system on tk_core seq lock.

[   48.950592] ======================================================
[   48.950622] [ INFO: possible circular locking dependency detected ]
[   48.950622] 4.10.0-rc7-next-20170213+ #101 Not tainted
[   48.950622] -------------------------------------------------------
[   48.950622] kworker/0:0/3 is trying to acquire lock:
[   48.950653]  (tk_core){----..}, at: [<c01cc624>] retrigger_next_event+0x4c/0x90
[   48.950683]
               but task is already holding lock:
[   48.950683]  (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90
[   48.950714]
               which lock already depends on the new lock.

[   48.950714]
               the existing dependency chain (in reverse order) is:
[   48.950714]
               -> #5 (hrtimer_bases.lock){-.-...}:
[   48.950744]        _raw_spin_lock_irqsave+0x50/0x64
[   48.950775]        lock_hrtimer_base+0x28/0x58
[   48.950775]        hrtimer_start_range_ns+0x20/0x5c8
[   48.950775]        __enqueue_rt_entity+0x320/0x360
[   48.950805]        enqueue_rt_entity+0x2c/0x44
[   48.950805]        enqueue_task_rt+0x24/0x94
[   48.950836]        ttwu_do_activate+0x54/0xc0
[   48.950836]        try_to_wake_up+0x248/0x5c8
[   48.950836]        __setup_irq+0x420/0x5f0
[   48.950836]        request_threaded_irq+0xdc/0x184
[   48.950866]        devm_request_threaded_irq+0x58/0xa4
[   48.950866]        omap_i2c_probe+0x530/0x6a0
[   48.950897]        platform_drv_probe+0x50/0xb0
[   48.950897]        driver_probe_device+0x1f8/0x2cc
[   48.950897]        __driver_attach+0xc0/0xc4
[   48.950927]        bus_for_each_dev+0x6c/0xa0
[   48.950927]        bus_add_driver+0x100/0x210
[   48.950927]        driver_register+0x78/0xf4
[   48.950958]        do_one_initcall+0x3c/0x16c
[   48.950958]        kernel_init_freeable+0x20c/0x2d8
[   48.950958]        kernel_init+0x8/0x110
[   48.950988]        ret_from_fork+0x14/0x24
[   48.950988]
               -> #4 (&rt_b->rt_runtime_lock){-.-...}:
[   48.951019]        _raw_spin_lock+0x40/0x50
[   48.951019]        rq_offline_rt+0x9c/0x2bc
[   48.951019]        set_rq_offline.part.2+0x2c/0x58
[   48.951049]        rq_attach_root+0x134/0x144
[   48.951049]        cpu_attach_domain+0x18c/0x6f4
[   48.951049]        build_sched_domains+0xba4/0xd80
[   48.951080]        sched_init_smp+0x68/0x10c
[   48.951080]        kernel_init_freeable+0x160/0x2d8
[   48.951080]        kernel_init+0x8/0x110
[   48.951080]        ret_from_fork+0x14/0x24
[   48.951110]
               -> #3 (&rq->lock){-.-.-.}:
[   48.951110]        _raw_spin_lock+0x40/0x50
[   48.951141]        task_fork_fair+0x30/0x124
[   48.951141]        sched_fork+0x194/0x2e0
[   48.951141]        copy_process.part.5+0x448/0x1a20
[   48.951171]        _do_fork+0x98/0x7e8
[   48.951171]        kernel_thread+0x2c/0x34
[   48.951171]        rest_init+0x1c/0x18c
[   48.951202]        start_kernel+0x35c/0x3d4
[   48.951202]        0x8000807c
[   48.951202]
               -> #2 (&p->pi_lock){-.-.-.}:
[   48.951232]        _raw_spin_lock_irqsave+0x50/0x64
[   48.951232]        try_to_wake_up+0x30/0x5c8
[   48.951232]        up+0x4c/0x60
[   48.951263]        __up_console_sem+0x2c/0x58
[   48.951263]        console_unlock+0x3b4/0x650
[   48.951263]        vprintk_emit+0x270/0x474
[   48.951293]        vprintk_default+0x20/0x28
[   48.951293]        printk+0x20/0x30
[   48.951324]        kauditd_hold_skb+0x94/0xb8
[   48.951324]        kauditd_thread+0x1a4/0x56c
[   48.951324]        kthread+0x104/0x148
[   48.951354]        ret_from_fork+0x14/0x24
[   48.951354]
               -> #1 ((console_sem).lock){-.....}:
[   48.951385]        _raw_spin_lock_irqsave+0x50/0x64
[   48.951385]        down_trylock+0xc/0x2c
[   48.951385]        __down_trylock_console_sem+0x24/0x80
[   48.951385]        console_trylock+0x10/0x8c
[   48.951416]        vprintk_emit+0x264/0x474
[   48.951416]        vprintk_default+0x20/0x28
[   48.951416]        printk+0x20/0x30
[   48.951446]        tk_debug_account_sleep_time+0x5c/0x70
[   48.951446]        __timekeeping_inject_sleeptime.constprop.3+0x170/0x1a0
[   48.951446]        timekeeping_resume+0x218/0x23c
[   48.951477]        syscore_resume+0x94/0x42c
[   48.951477]        suspend_enter+0x554/0x9b4
[   48.951477]        suspend_devices_and_enter+0xd8/0x4b4
[   48.951507]        enter_state+0x934/0xbd4
[   48.951507]        pm_suspend+0x14/0x70
[   48.951507]        state_store+0x68/0xc8
[   48.951538]        kernfs_fop_write+0xf4/0x1f8
[   48.951538]        __vfs_write+0x1c/0x114
[   48.951538]        vfs_write+0xa0/0x168
[   48.951568]        SyS_write+0x3c/0x90
[   48.951568]        __sys_trace_return+0x0/0x10
[   48.951568]
               -> #0 (tk_core){----..}:
[   48.951599]        lock_acquire+0xe0/0x294
[   48.951599]        ktime_get_update_offsets_now+0x5c/0x1d4
[   48.951629]        retrigger_next_event+0x4c/0x90
[   48.951629]        on_each_cpu+0x40/0x7c
[   48.951629]        clock_was_set_work+0x14/0x20
[   48.951660]        process_one_work+0x2b4/0x808
[   48.951660]        worker_thread+0x3c/0x550
[   48.951660]        kthread+0x104/0x148
[   48.951690]        ret_from_fork+0x14/0x24
[   48.951690]
               other info that might help us debug this:

[   48.951690] Chain exists of:
                 tk_core --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock

[   48.951721]  Possible unsafe locking scenario:

[   48.951721]        CPU0                    CPU1
[   48.951721]        ----                    ----
[   48.951721]   lock(hrtimer_bases.lock);
[   48.951751]                                lock(&rt_b->rt_runtime_lock);
[   48.951751]                                lock(hrtimer_bases.lock);
[   48.951751]   lock(tk_core);
[   48.951782]
                *** DEADLOCK ***

[   48.951782] 3 locks held by kworker/0:0/3:
[   48.951782]  #0:  ("events"){.+.+.+}, at: [<c0156590>] process_one_work+0x1f8/0x808
[   48.951812]  #1:  (hrtimer_work){+.+...}, at: [<c0156590>] process_one_work+0x1f8/0x808
[   48.951843]  #2:  (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90
[   48.951843]   stack backtrace:
[   48.951873] CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.10.0-rc7-next-20170213+
[   48.951904] Workqueue: events clock_was_set_work
[   48.951904] [<c0110208>] (unwind_backtrace) from [<c010c224>] (show_stack+0x10/0x14)
[   48.951934] [<c010c224>] (show_stack) from [<c04ca6c0>] (dump_stack+0xac/0xe0)
[   48.951934] [<c04ca6c0>] (dump_stack) from [<c019b5cc>] (print_circular_bug+0x1d0/0x308)
[   48.951965] [<c019b5cc>] (print_circular_bug) from [<c019d2a8>] (validate_chain+0xf50/0x1324)
[   48.951965] [<c019d2a8>] (validate_chain) from [<c019ec18>] (__lock_acquire+0x468/0x7e8)
[   48.951995] [<c019ec18>] (__lock_acquire) from [<c019f634>] (lock_acquire+0xe0/0x294)
[   48.951995] [<c019f634>] (lock_acquire) from [<c01d0ea0>] (ktime_get_update_offsets_now+0x5c/0x1d4)
[   48.952026] [<c01d0ea0>] (ktime_get_update_offsets_now) from [<c01cc624>] (retrigger_next_event+0x4c/0x90)
[   48.952026] [<c01cc624>] (retrigger_next_event) from [<c01e4e24>] (on_each_cpu+0x40/0x7c)
[   48.952056] [<c01e4e24>] (on_each_cpu) from [<c01cafc4>] (clock_was_set_work+0x14/0x20)
[   48.952056] [<c01cafc4>] (clock_was_set_work) from [<c015664c>] (process_one_work+0x2b4/0x808)
[   48.952087] [<c015664c>] (process_one_work) from [<c0157774>] (worker_thread+0x3c/0x550)
[   48.952087] [<c0157774>] (worker_thread) from [<c015d644>] (kthread+0x104/0x148)
[   48.952087] [<c015d644>] (kthread) from [<c0107830>] (ret_from_fork+0x14/0x24)

Replace printk() with printk_deferred(), which does not call into
the scheduler.

Fixes: 0bf43f15db ("timekeeping: Prints the amounts of time spent during suspend")
Reported-and-tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "[4.9+]" <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-15 11:46:08 +01:00
Rashmica Gupta
4546561551 powerpc/asm: Use OFFSET macro in asm-offsets.c
A lot of entries in asm-offests.c look like this:

  DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));

But there is a common macro, OFFSET, which makes this cleaner:

  OFFSET(TI_flags, thread_info, flags)

So use it.

Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15 21:42:19 +11:00
Shawn Lin
8c7cdbf927 mmc: core: add mmc prefix for blk_fixups
That makes all the quirks table look more consistent.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15 11:34:27 +01:00
Shawn Lin
0e9cfcf44e mmc: core: move all quirks together into quirks.h
It's not appreciated to place quirks everywhere, let's
put them together just like what we do for USB, PCI etc.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15 11:34:27 +01:00
Shawn Lin
1144c1e4dd mmc: core: improve the quirks for sdio devices
Rename mmc_fixup_methods to sdio_fixup_methods to better
reflect that it's for sdio devices. So we could also pass
on it from sdio card's probe sequence just like what we do
for eMMC and block there.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15 11:34:26 +01:00
Shawn Lin
884f386078 mmc: core: move some sdio IDs out of quirks file
Consolidate all the sdio devices' IDs into sdio_ids.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15 11:34:26 +01:00
Shawn Lin
28fc64af63 mmc: core: change quirks.c to be a header file
Rename quirks.c to quirks.h, and include it for
individual C files which need it.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15 11:34:26 +01:00
Masahiro Yamada
4e03f628b4 mmc: sdhci-cadence: fix bit shift of read data from PHY port
This macro is currently unused, but it may be useful for debug use.
Fix it just in case.

Fixes: ff6af28faf ("mmc: sdhci-cadence: add Cadence SD4HC support")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15 11:32:14 +01:00
Hauke Mehrtens
9050d50e22 MIPS: lantiq: Set physical_memsize
physical_memsize is needed by the vpe loader code and the platform
specific code has to define it. This value will be given to the
firmware loaded with the VPE loader. I am not aware of any standard
interface or better value to provide here.

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: d9ae4f18c0 ("MIPS: Lantiq: Activate more drivers in default configuration")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14908/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-15 10:18:47 +00:00
Chris Wilson
75c7b0b862 drm/i915: Use preferred kernel types in i915_gem_gtt.c
Make checkpatch happy and make the use of u32/u64 consistent throughout
i915_gem_gtt.[ch]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-23-chris@chris-wilson.co.uk
2017-02-15 10:07:35 +00:00
Chris Wilson
57202f47af drm/i915: Differentiate the aliasing_ppgtt with an invalid filp
Use an invalid filp so that the aliasing_ppgtt can be clearly
identified.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-22-chris@chris-wilson.co.uk
2017-02-15 10:07:34 +00:00
Chris Wilson
e565ceb086 drm/i915: Only preallocate the aliasing GTT to the extents of the global GTT
As the aliasing GTT is only accessed via the global GTT, we will never
use more of it than we expose via the Global GTT and so we only need to
preallocate sufficient space within the ppgtt for the full GTT. Equally,
if the aliasing GTT is smaller than the global GTT, we have a serious
issue and must bail.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-21-chris@chris-wilson.co.uk
2017-02-15 10:07:33 +00:00
Chris Wilson
381b943b07 drm/i915: Remove i915_address_space.start
Once upon a time, back in the UMS days, we supported userspace
initialising the GTT and sharing portions of the GTT with other users.
Now, we own the GTT (both global and per-process) and the tables always
start at 0 - so we can remove i915_address_space.start and forget about
this old complication.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-20-chris@chris-wilson.co.uk
2017-02-15 10:07:32 +00:00
Chris Wilson
998f6c00a1 drm/i915: Remove unused ppgtt->enable()
We never assign or use the ppgtt->enable() callback, so remove it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-19-chris@chris-wilson.co.uk
2017-02-15 10:07:31 +00:00
Chris Wilson
3dc523eace drm/i915: Remove defunct GTT tracepoints
The tracepoints are now entirely synonymous with binding and unbinding the
VMA (and the tracepoints there).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-18-chris@chris-wilson.co.uk
2017-02-15 10:07:30 +00:00
Chris Wilson
75afcf72c7 drm/i915: Always mark the PDP as dirty when altered
We want to reload the PDP (and flush the TLB) when the addresses are
changed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-17-chris@chris-wilson.co.uk
2017-02-15 10:07:29 +00:00
Chris Wilson
ec151f31cd drm/i915: Remove superfluous posting reads after clear GGTT
The barrier here is not required - we apply the barrier before the range
is ever reused by the GPU instead.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-16-chris@chris-wilson.co.uk
2017-02-15 10:07:29 +00:00
Chris Wilson
c5d092a429 drm/i915: Remove bitmap tracking for used-pml4
We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-15-chris@chris-wilson.co.uk
2017-02-15 10:07:28 +00:00
Chris Wilson
e2b763caa6 drm/i915: Remove bitmap tracking for used-pdpes
We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-14-chris@chris-wilson.co.uk
2017-02-15 10:07:27 +00:00
Chris Wilson
fe52e37fa8 drm/i915: Remove bitmap tracking for used-pdes
We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-13-chris@chris-wilson.co.uk
2017-02-15 10:07:26 +00:00
Chris Wilson
dd19674bac drm/i915: Remove bitmap tracking for used-ptes
We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99295
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-12-chris@chris-wilson.co.uk
2017-02-15 10:07:24 +00:00
Chris Wilson
16a011c8be drm/i915: Tidy gen6_write_pde()
Stop passing around unused parameters makes the code more compact.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-11-chris@chris-wilson.co.uk
2017-02-15 10:07:24 +00:00
Chris Wilson
f0a22974ac drm/i915: Remove redundant clear of appgtt
Upon creation of the va range, it is initialised to point at scratch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-10-chris@chris-wilson.co.uk
2017-02-15 10:07:23 +00:00
Chris Wilson
52c126ee90 drm/i915: Always preallocate gen6/7 ppgtt
The hardware does not cope very well with us changing the PD within an
active context (the context must be idle for it to re-read the PD). As
we only check whether the page is idle before changing the entry (and on
through the PD tree), we cannot reliably replace PD entries on
gen6/gen7. To fully avoid changing the tree at runtime, preallocate it
on init.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-9-chris@chris-wilson.co.uk
2017-02-15 10:07:22 +00:00
Chris Wilson
ff685975d9 drm/i915: Move allocate_va_range to GTT
In the future, we need to call allocate_va_range on the aliasing-ppgtt
which means moving the call down from the vma into the vm (which is
more appropriate for calling the vm function).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-8-chris@chris-wilson.co.uk
2017-02-15 10:07:21 +00:00
Chris Wilson
9231da70b3 drm/i915: Remove kmap/kunmap wrappers
As these are now both plain and simple kmap_atomic/kunmap_atomic pairs,
we can remove the wrappers for a small gain of clarity (in particular,
not hiding the atomic critical sections!).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-7-chris@chris-wilson.co.uk
2017-02-15 10:07:20 +00:00
Chris Wilson
8448661d65 drm/i915: Convert clflushed pagetables over to WC maps
We flush the entire page every time we update a few bytes, making the
update of a page table many, many times slower than is required. If we
create a WC map of the page for our updates, we can avoid the clflush
but incur additional cost for creating the pagetable. We amoritize that
cost by reusing page vmappings, and only changing the page protection in
batches.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2017-02-15 10:07:18 +00:00
Chris Wilson
cbc4e9e6a6 drm/i915: Split ggtt/alasing_gtt unbind_vma
Similar to how we already split the bind_vma for ggtt/aliasing_gtt, also
split up the unbind for symmetry.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-5-chris@chris-wilson.co.uk
2017-02-15 10:05:54 +00:00
Chris Wilson
1188bc66eb drm/i915: Don't special case teardown of aliasing_ppgtt
The aliasing_ppgtt is a regular ppgtt, and we can use the regular
i915_ppgtt_put() to properly tear it down.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-4-chris@chris-wilson.co.uk
2017-02-15 10:05:53 +00:00
Chris Wilson
894ccebee2 drm/i915: Micro-optimise gen8_ppgtt_insert_entries()
Improve the sg iteration and in hte process eliminate a bug in
miscomputing the pml4 length as orig_nents<<PAGE_SHIFT is no longer the
full length of the sg table.

v2: Check for the end of the fourth level page table (the final pdpe)
and move onto the next.
v3: Assert that 3lvl insert_pte_entries doesn't overflow its smaller set
of PDP.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-3-chris@chris-wilson.co.uk
2017-02-15 10:05:53 +00:00
Chris Wilson
b31144c0da drm/i915: Micro-optimise gen6_ppgtt_insert_entries()
Inline the address computation to avoid the vfunc call for every page.
We still have to pay the high overhead of sg_page_iter_next(), but now
at least GCC can optimise the inner most loop, giving a significant
boost to some thrashing Unreal Engine workloads.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-2-chris@chris-wilson.co.uk
2017-02-15 10:05:52 +00:00
Chris Wilson
ba7a5741b9 drm/i915: Micro-optimise i915_get_ggtt_vma_pages()
The predominant VMA class is normal GTT, so allow gcc to emphasize that
path and avoid unnecessary stack movement.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-1-chris@chris-wilson.co.uk
2017-02-15 10:05:51 +00:00
Steffen Klassert
7785bba299 esp: Add a software GRO codepath
This patch adds GRO ifrastructure and callbacks for ESP on
ipv4 and ipv6.

In case the GRO layer detects an ESP packet, the
esp{4,6}_gro_receive() function does a xfrm state lookup
and calls the xfrm input layer if it finds a matching state.
The packet will be decapsulated and reinjected it into layer 2.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15 11:04:11 +01:00
Steffen Klassert
54ef207ac8 xfrm: Extend the sec_path for IPsec offloading
We need to keep per packet offloading informations across
the layers. So we extend the sec_path to carry these for
the input and output offload codepath.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15 11:04:10 +01:00
Pierre-Louis Bossart
bb08c04dc8 drm/dp/mst: fix kernel oops when turning off secondary monitor
100% reproducible issue found on SKL SkullCanyon NUC with two external
DP daisy-chained monitors in DP/MST mode. When turning off or changing
the input of the second monitor the machine stops with a kernel
oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly.

This issue is traced to an inconsistent control flow in
drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the
same time as 'req_payload.num_slots' is set to zero, but the pointer is
dereferenced even when req_payload.num_slot is zero.

The problematic dereference was introduced in commit dfda0df34
("drm/mst: rework payload table allocation to conform better") and may
impact all versions since v3.18

The fix suggested by Chris Wilson removes the kernel oops and was found to
work well after 10mn of monkey-testing with the second monitor power and
input buttons

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990
Fixes: dfda0df342 ("drm/mst: rework payload table allocation to conform better.")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v3.18+
Tested-by: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.com
2017-02-15 11:41:19 +02:00
Al Viro
7d7be3aa08 powerpc/spufs: Get rid of broken fasync stuff
In all the years it's been in the tree it had never been used by
anything - it would instantly trigger BUG_ON() in fs/fcntl.c due to
bogus band argument (ie. POLLIN not POLL_IN) passed to kill_fasync().
Since nobody had ever used it in ten years, let's just rip it out and be
done with that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15 20:32:59 +11:00
Hans de Goede
dfb65e71ea drm/i915: Fix not finding the VBT when it overlaps with OPREGION_ASLE_EXT
If there is no OPREGION_ASLE_EXT then a VBT stored in mailbox #4 may
use the ASLE_EXT parts of the opregion. Adjust the vbt_size calculation
for a vbt in mailbox #4 for this.

This fixes the driver not finding the VBT on a jumper ezpad mini3
cherrytrail tablet and on a ACER SW5_017 machine.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487088758-30050-1-git-send-email-jani.nikula@intel.com
2017-02-15 11:29:04 +02:00