[ Upstream commit 73ab05aa46 ]
With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241010014432.194742-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 466e4d801c ]
Adding task_work from NMI context requires the following:
- The kasan_record_aux_stack() is not NMU safe and must be avoided.
- Using TWA_RESUME is NMI safe. If the NMI occurs while the CPU is in
userland then it will continue in userland and not invoke the `work'
callback.
Add TWA_NMI_CURRENT as an additional notify mode. In this mode skip
kasan and use irq_work in hardirq-mode to for needed interrupt. Set
TIF_NOTIFY_RESUME within the irq_work callback due to k[ac]san
instrumentation in test_and_set_bit() which does not look NMI safe in
case of a report.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240704170424.1466941-3-bigeasy@linutronix.de
Stable-dep-of: 73ab05aa46 ("sched/core: Disable page allocation in task_tick_mm_cid()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5c16492c6 ]
At the moment we don't store cookie for perf_event probes,
while we do that for the rest of the probes.
Adding cookie fields to struct bpf_link_info perf event
probe records:
perf_event.uprobe
perf_event.kprobe
perf_event.tracepoint
perf_event.perf_event
And the code to store that in bpf_link_info struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20240119110505.400573-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 4deecdd29c ("bpf: fix unpopulated name_len field in perf_event link info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3acf8ace68 ]
Add missed value to kprobe attached through perf link info to
hold the stats of missed kprobe handler execution.
The kprobe's missed counter gets incremented when kprobe handler
is not executed due to another kprobe running on the same cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org
Stable-dep-of: 4deecdd29c ("bpf: fix unpopulated name_len field in perf_event link info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09d88791c7 ]
The bpf_redirect_info is shared between the SKB and XDP redirect paths,
and the two paths use the same numeric flag values in the ri->flags
field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that
if skb bpf_redirect_neigh() is used with a non-NULL params argument and,
subsequently, an XDP redirect is performed using the same
bpf_redirect_info struct, the XDP path will get confused and end up
crashing, which syzbot managed to trigger.
With the stack-allocated bpf_redirect_info, the structure is no longer
shared between the SKB and XDP paths, so the crash doesn't happen
anymore. However, different code paths using identically-numbered flag
values in the same struct field still seems like a bit of a mess, so
this patch cleans that up by moving the flag definitions together and
redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap
with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make
sure the overlap is not re-introduced by mistake.
Fixes: e624d4ed4a ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-by: syzbot+cca39e6e84a367a7e6f6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=cca39e6e84a367a7e6f6
Link: https://lore.kernel.org/bpf/20240920125625.59465-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1442ee0011 upstream.
Kunkun Jiang reported that there is a small window of opportunity for
userspace to force a change of affinity for a VPE while the VPE has already
been unmapped, but the corresponding doorbell interrupt still visible in
/proc/irq/.
Plug the race by checking the value of vmapp_count, which tracks whether
the VPE is mapped ot not, and returning an error in this case.
This involves making vmapp_count common to both GICv4.1 and its v4.0
ancestor.
Fixes: 64edfaa9a2 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c182ece6-2ba0-ce4f-3404-dba7a3ab6c52@huawei.com
Link: https://lore.kernel.org/all/20241002204959.2051709-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42aafd8b48 upstream.
UBLK_F_USER_COPY requires userspace to call write() on ublk char
device for filling request buffer, and unprivileged device can't
be trusted.
So don't allow user copy for unprivileged device.
Cc: stable@vger.kernel.org
Fixes: 1172d5b8be ("ublk: support user copy")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241016134847.2911721-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d7b2ce43d upstream.
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.
include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
| static
8 warnings generated.
Fixes: 6517798dd3 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dae9f1187 upstream.
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list.
Fixes: b8273570f8 ("genetlink: fix netns vs. netlink table locking (2)")
Cc: stable@vger.kernel.org
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241003104431.12391-1-a.kovaleva@yadro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 386520e0ec ]
Similarly to RTNL_FLAG_DOIT_UNLOCKED, this new flag
allows dump operations registered via rtnl_register()
or rtnl_register_module() to opt-out from RTNL protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5be2062e30 ("mpls: Handle error of rtnl_register_module().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d51705614f ]
Since introduced, mctp has been ignoring the returned value of
rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 583be982d9 ("mctp: Add device handling and netlink interface")
Fixes: 831119f887 ("mctp: Add neighbour netlink interface")
Fixes: 06d2f4c583 ("mctp: Add netlink route management")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07cc7b0b94 ]
Before commit addf9b90de ("net: rtnetlink: use rcu to free rtnl message
handlers"), once rtnl_msg_handlers[protocol] was allocated, the following
rtnl_register_module() for the same protocol never failed.
However, after the commit, rtnl_msg_handler[protocol][msgtype] needs to
be allocated in each rtnl_register_module(), so each call could fail.
Many callers of rtnl_register_module() do not handle the returned error,
and we need to add many error handlings.
To handle that easily, let's add wrapper functions for bulk registration
of rtnetlink message handlers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 78b7b99183 ("vxlan: Handle error of rtnl_register_module().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8874e414fe ]
Add defines to get major and minor version from a TPMI version field
value. This will avoid code duplication to convert in every feature
driver. Also add define for invalid version field.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20231003184916.1860084-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 1d39092397 ("powercap: intel_rapl_tpmi: Ignore minor version change")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3868ab0f19 ]
The 2023 SIGCOMM paper "Improving Network Availability with Protective
ReRoute" has indicated Linux TCP's RTO-triggered txhash rehashing can
effectively reduce application disruption during outages. To better
measure the efficacy of this feature, this patch adds three more
detailed stats during RTO recovery and exports via TCP_INFO.
Applications and monitoring systems can leverage this data to measure
the network path diversity and end-to-end repair latency during network
outages to improve their network infrastructure.
The following counters are added to tcp_sock in order to track RTO
events over the lifetime of a TCP socket.
1. u16 total_rto - Counts the total number of RTO timeouts.
2. u16 total_rto_recoveries - Counts the total number of RTO recoveries.
3. u32 total_rto_time - Counts the total time spent (ms) in RTO
recoveries. (time spent in CA_Loss and
CA_Recovery states)
To compute total_rto_time, we add a new u32 rto_stamp field to
tcp_sock. rto_stamp records the start timestamp (ms) of the last RTO
recovery (CA_Loss).
Corresponding fields are also added to the tcp_info struct.
Signed-off-by: Aananth V <aananthv@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 27c80efcc2 ("tcp: fix TFO SYN_RECV to not zero retrans_stamp with retransmits out")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59c34008d3 ]
Add new PCI device IDs into the root IDs and miscellaneous IDs lists to
provide support for the latest generation of AMD 1Ah family 60h processor
models.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20240722092801.3480266-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e640f0a47 ]
Add the new PCI Device IDs to the MISC IDs list to support new
generation of AMD 1Ah family 70h Models of processors.
[ bp: Massage commit message. ]
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240510111829.969501-1-Shyam-sundar.S-k@amd.com
Stable-dep-of: 59c34008d3 ("x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9246b487ab ]
Add DMA support for audio function of Glenfly Arise chip, which uses
Requester ID of function 0.
Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com
Signed-off-by: SiyuLi <siyuli@glenfly.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
[bhelgaas: lower-case hex to match local code, drop unused Device IDs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28ead3eaab ]
bpf progs can be attached to kernel functions, and the attached functions
can take different parameters or return different return values. If
prog attached to one kernel function tail calls prog attached to another
kernel function, the ctx access or return value verification could be
bypassed.
For example, if prog1 is attached to func1 which takes only 1 parameter
and prog2 is attached to func2 which takes two parameters. Since verifier
assumes the bpf ctx passed to prog2 is constructed based on func2's
prototype, verifier allows prog2 to access the second parameter from
the bpf ctx passed to it. The problem is that verifier does not prevent
prog1 from passing its bpf ctx to prog2 via tail call. In this case,
the bpf ctx passed to prog2 is constructed from func1 instead of func2,
that is, the assumption for ctx access verification is bypassed.
Another example, if BPF LSM prog1 is attached to hook file_alloc_security,
and BPF LSM prog2 is attached to hook bpf_lsm_audit_rule_known. Verifier
knows the return value rules for these two hooks, e.g. it is legal for
bpf_lsm_audit_rule_known to return positive number 1, and it is illegal
for file_alloc_security to return positive number. So verifier allows
prog2 to return positive number 1, but does not allow prog1 to return
positive number. The problem is that verifier does not prevent prog1
from calling prog2 via tail call. In this case, prog2's return value 1
will be used as the return value for prog1's hook file_alloc_security.
That is, the return value rule is bypassed.
This patch adds restriction for tail call to prevent such bypasses.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20240719110059.797546-4-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e8fb2eda9 ]
Use the correct struct member name in the kernel-doc notation
to prevent a kernel-doc build warning.
include/linux/jbd2.h:1303: warning: Function parameter or struct member 'j_transaction_overhead_buffers' not described in 'journal_s'
include/linux/jbd2.h:1303: warning: Excess struct member 'j_transaction_overhead' description in 'journal_s'
Fixes: e3a00a2378 ("jbd2: precompute number of transaction descriptor blocks")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20240710182252.4c281445@canb.auug.org.au/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240723051647.3053491-1-rdunlap@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4367ac838 ]
The scsi device flag no_start_on_resume is not set by any scsi low
level driver. Remove it. This reverts the changes introduced by commit
0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume").
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 7a6bbc2829 ("scsi: sd: Do not repeat the starting disk message")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 831ec5e353 ]
Since we put dvc_tlv static variable to a header file it's copied to
each module that includes the header. But not all of them are actually
used it.
Fix this W=1 build warning:
include/sound/tas2781-tlv.h:18:35: warning: 'dvc_tlv' defined but not
used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403290354.v0StnRpc-lkp@intel.com/
Fixes: ae065d0ce9 ("ALSA: hda/tas2781: remove digital gain kcontrol")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <0e461545a2a6e9b6152985143e50526322e5f76b.1711665731.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee08acb58f ]
In order to optimize the data transfer, let's use the async DMA operation
for writing (queuing) data to the host.
In the async path, the completion event for the transfer ring will only be
sent to the host when the controller driver notifies the MHI stack of the
actual transfer completion using the callback (mhi_ep_skb_completion)
supplied in "struct mhi_ep_buf_info".
Also to accommodate the async operation, the transfer ring read offset
(ring->rd_offset) is cached in the "struct mhi_ep_chan" and updated locally
to let the stack queue further ring items to the controller driver. But the
actual read offset of the transfer ring will only be updated in the
completion callback.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: c7d0b2db5b ("bus: mhi: ep: Do not allocate memory for MHI objects from DMA zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b786ed8fb ]
These callbacks can be implemented by the controller drivers to perform
async read/write operation that increases the throughput.
For aiding the async operation, a completion callback is also introduced.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: c7d0b2db5b ("bus: mhi: ep: Do not allocate memory for MHI objects from DMA zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 927105244f ]
In the preparation for adding async API support, let's rename the existing
APIs to read_sync() and write_sync() to make it explicit that these APIs
are used for synchronous read/write.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: c7d0b2db5b ("bus: mhi: ep: Do not allocate memory for MHI objects from DMA zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 245eeff18d ]
If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.
The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1a1c3d794e ("ASoC: cs35l56: Use PCI SSID as the firmware UID")
Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 372c669271 ]
This reverts commit 41efa43124.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along. If this is
re-added later, this could be squashed with these commits:
0194425af0 ("PCI/MSI: Provide IMS (Interrupt Message Store) support")
c9e5bea273 ("PCI/MSI: Provide pci_ims_alloc/free_irq()")
which added the non-stub implementations.
Link: https://lore.kernel.org/r/20240410221307.2162676-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 382d1741b5 ]
As defined by the MANA Hardware spec, the queue size for DMA is 4KB
minimal, and power of 2. And, the HWC queue size has to be exactly
4KB.
To support page sizes other than 4KB on ARM64, define the minimal
queue size as a macro separately from the PAGE_SIZE, which we always
assumed it to be 4KB before supporting ARM64.
Also, add MANA specific macros and update code related to size
alignment, DMA region calculations, etc.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1718655446-6576-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 9e517a8e9d ("RDMA/mana_ib: use the correct page table index based on hardware page size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d3cefaf65 ]
Krzysztof reported an issue [0] which is caused by parallel attempts to
instantiate the same I2C client device. This can happen if driver
supports auto-detection, but certain devices are also instantiated
explicitly.
The original change isn't actually wrong, it just revealed that I2C core
isn't prepared yet to handle this scenario.
Calls to i2c_new_client_device() can be nested, therefore we can't use a
simple mutex here. Parallel instantiation of devices at different addresses
is ok, so we just have to prevent parallel instantiation at the same address.
We can use a bitmap with one bit per 7-bit I2C client address, and atomic
bit operations to set/check/clear bits.
Now a parallel attempt to instantiate a device at the same address will
result in -EBUSY being returned, avoiding the "sysfs: cannot create duplicate
filename" splash.
Note: This patch version includes small cosmetic changes to the Tested-by
version, only functional change is that address locking is supported
for slave addresses too.
[0] https://lore.kernel.org/linux-i2c/9479fe4e-eb0c-407e-84c0-bd60c15baf74@ans.pl/T/#m12706546e8e2414d8f1a0dc61c53393f731685cc
Fixes: caba40ec35 ("eeprom: at24: Probe for DDR3 thermal sensor in the SPD case")
Cc: stable@vger.kernel.org
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73febd775b ]
Two drivers already implement custom debugfs handling for their
i2c_adapter and more will come. So, let the core create a debugfs
directory per adapter and pass that to drivers for their debugfs files.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 8d3cefaf65 ("i2c: core: Lock address during client device instantiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 678379e1d4 upstream.
Cloning a descriptor table picks the size that would cover all currently
opened files. That's fine for clone() and unshare(), but for close_range()
there's an additional twist - we clone before we close, and it would be
a shame to have
close_range(3, ~0U, CLOSE_RANGE_UNSHARE)
leave us with a huge descriptor table when we are not going to keep
anything past stderr, just because some large file descriptor used to
be open before our call has taken it out.
Unfortunately, it had been dealt with in an inherently racy way -
sane_fdtable_size() gets a "don't copy anything past that" argument
(passed via unshare_fd() and dup_fd()), close_range() decides how much
should be trimmed and passes that to unshare_fd().
The problem is, a range that used to extend to the end of descriptor
table back when close_range() had looked at it might very well have stuff
grown after it by the time dup_fd() has allocated a new files_struct
and started to figure out the capacity of fdtable to be attached to that.
That leads to interesting pathological cases; at the very least it's a
QoI issue, since unshare(CLONE_FILES) is atomic in a sense that it takes
a snapshot of descriptor table one might have observed at some point.
Since CLOSE_RANGE_UNSHARE close_range() is supposed to be a combination
of unshare(CLONE_FILES) with plain close_range(), ending up with a
weird state that would never occur with unshare(2) is confusing, to put
it mildly.
It's not hard to get rid of - all it takes is passing both ends of the
range down to sane_fdtable_size(). There we are under ->files_lock,
so the race is trivially avoided.
So we do the following:
* switch close_files() from calling unshare_fd() to calling
dup_fd().
* undo the calling convention change done to unshare_fd() in
60997c3d45 "close_range: add CLOSE_RANGE_UNSHARE"
* introduce struct fd_range, pass a pointer to that to dup_fd()
and sane_fdtable_size() instead of "trim everything past that point"
they are currently getting. NULL means "we are not going to be punching
any holes"; NR_OPEN_MAX is gone.
* make sane_fdtable_size() use find_last_bit() instead of
open-coding it; it's easier to follow that way.
* while we are at it, have dup_fd() report errors by returning
ERR_PTR(), no need to use a separate int *errorp argument.
Fixes: 60997c3d45 "close_range: add CLOSE_RANGE_UNSHARE"
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0f02536ff upstream.
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute.
Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20240917134246.584026-1-mikisabate@gmail.com
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 599f689905 upstream.
The cec_msg_set_reply_to() helper function never zeroed the
struct cec_msg flags field, this can cause unexpected behavior
if flags was uninitialized to begin with.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0dbacebede ("[media] cec: move the CEC framework out of staging and to media")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abf3a3ea9a upstream.
The numbering in Exynos7885's FSYS CMU bindings has 4 duplicated by
accident, with the rest of the bindings continuing with 5.
Fix this by moving CLK_MOUT_FSYS_USB30DRD_USER to the end as 11.
Since CLK_MOUT_FSYS_USB30DRD_USER is not used in any device tree as of
now, and there are no other clocks affected (maybe apart from
CLK_MOUT_FSYS_MMC_SDIO_USER which the number was shared with, also not
used in a device tree), this is the least impactful way to solve this
problem.
Fixes: cd268e309c ("dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS")
Cc: stable@vger.kernel.org
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-2-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cfa7f3d2c5 ]
When tracing user functions with uprobe functionality, it's common to
install the probe (e.g., a BPF program) at the first instruction of the
function. This is often going to be `push %rbp` instruction in function
preamble, which means that within that function frame pointer hasn't
been established yet. This leads to consistently missing an actual
caller of the traced function, because perf_callchain_user() only
records current IP (capturing traced function) and then following frame
pointer chain (which would be caller's frame, containing the address of
caller's caller).
So when we have target_1 -> target_2 -> target_3 call chain and we are
tracing an entry to target_3, captured stack trace will report
target_1 -> target_3 call chain, which is wrong and confusing.
This patch proposes a x86-64-specific heuristic to detect `push %rbp`
(`push %ebp` on 32-bit architecture) instruction being traced. Given
entire kernel implementation of user space stack trace capturing works
under assumption that user space code was compiled with frame pointer
register (%rbp/%ebp) preservation, it seems pretty reasonable to use
this instruction as a strong indicator that this is the entry to the
function. In that case, return address is still pointed to by %rsp/%esp,
so we fetch it and add to stack trace before proceeding to unwind the
rest using frame pointer-based logic.
We also check for `endbr64` (for 64-bit modes) as another common pattern
for function entry, as suggested by Josh Poimboeuf. Even if we get this
wrong sometimes for uprobes attached not at the function entry, it's OK
because stack trace will still be overall meaningful, just with one
extra bogus entry. If we don't detect this, we end up with guaranteed to
be missing caller function entry in the stack trace, which is worse
overall.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240729175223.23914-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53369581dc ]
We want to determine the size of the devcoredump before writing it out.
To that end, we will run the devcoredump printer with NULL data to get
the size, alloc data based on the generated offset, then run the
devcorecump again with a valid data pointer to print. This necessitates
not writing data to the data pointer on the initial pass, when it is
NULL.
v5:
- Better commit message (Jonathan)
- Add kerenl doc with examples (Jani)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-3-matthew.brost@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e9629d0ae ]
Use perf_allow_kernel() for 'pa_enable' (physical addresses),
'pct_enable' (physical timestamps) and context IDs. This means that
perf_event_paranoid is now taken into account and LSM hooks can be used,
which is more consistent with other perf_event_open calls. For example
PERF_SAMPLE_PHYS_ADDR uses perf_allow_kernel() rather than just
perfmon_capable().
This also indirectly fixes the following error message which is
misleading because perf_event_paranoid is not taken into account by
perfmon_capable():
$ perf record -e arm_spe/pa_enable/
Error:
Access to performance monitoring and observability operations is
limited. Consider adjusting /proc/sys/kernel/perf_event_paranoid
setting ...
Suggested-by: Al Grant <al.grant@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240827145113.1224604-1-james.clark@linaro.org
Link: https://lore.kernel.org/all/20240807120039.GD37996@noisy.programming.kicks-ass.net/
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c44d31cb3 ]
Algorithm registration is usually carried out during module init,
where as little work as possible should be carried out. The SIMD
code violated this rule by allocating a tfm, this then triggers a
full test of the algorithm which may dead-lock in certain cases.
SIMD is only allocating the tfm to get at the alg object, which is
in fact already available as it is what we are registering. Use
that directly and remove the crypto_alloc_tfm call.
Also remove some obsolete and unused SIMD API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e609c959a9 ]
Commit 24ab059d2e ("net: check dev->gso_max_size in gso_features_check()")
added a dev->gso_max_size test to gso_features_check() in order to fall
back to GSO when needed.
This was added as it was noticed that some drivers could misbehave if TSO
packets get too big. However, the check doesn't respect dev->gso_ipv4_max_size
limit. For instance, a device could be configured with BIG TCP for IPv4,
but not IPv6.
Therefore, add a netif_get_gso_max_size() equivalent to netif_get_gro_max_size()
and use the helper to respect both limits before falling back to GSO engine.
Fixes: 24ab059d2e ("net: check dev->gso_max_size in gso_features_check()")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240923212242.15669-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8d4d34df7 ]
Add a small netif_get_gro_max_size() helper which returns the maximum IPv4
or IPv6 GRO size of the netdevice.
We later add a netif_get_gso_max_size() equivalent as well for GSO, so that
these helpers can be used consistently instead of open-coded checks.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240923212242.15669-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: e609c959a9 ("net: Fix gso_features_check to check for both dev->gso_{ipv4_,}max_size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a4864671ca upstream.
It can be used after xas_load to check the order of loaded entries.
Compared to xa_get_order, it saves an XA_STATE and avoid a rewalk.
Added new test for xas_get_order, to make the test work, we have to export
xas_get_order with EXPORT_SYMBOL_GPL.
Also fix a sparse warning by checking the slot value with xa_entry instead
of accessing it directly, as suggested by Matthew Wilcox.
[kasong@tencent.com: simplify comment, sparse warning fix, per Matthew Wilcox]
Link: https://lkml.kernel.org/r/20240416071722.45997-4-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240415171857.19244-4-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 6758c1128c ("mm/filemap: optimize filemap folio adding")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63c15822b8 ]
The two new functions allow reading/writing values of length up to
BITS_PER_LONG bits at arbitrary position in the bitmap.
The code was taken from "bitops: Introduce the for_each_set_clump macro"
by Syed Nayyar Waris with a number of changes and simplifications:
- instead of using roundup(), which adds an unnecessary dependency
on <linux/math.h>, we calculate space as BITS_PER_LONG-offset;
- indentation is reduced by not using else-clauses (suggested by
checkpatch for bitmap_get_value());
- bitmap_get_value()/bitmap_set_value() are renamed to bitmap_read()
and bitmap_write();
- some redundant computations are omitted.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/lkml/fe12eedf3666f4af5138de0e70b67a07c7f40338.1592224129.git.syednwaris@gmail.com/
Suggested-by: Yury Norov <yury.norov@gmail.com>
Co-developed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 77b0b98bb7 ("btrfs: subpage: fix the bitmap dump which can cause bitmap corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8c2bd38b95 upstream.
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.
Fixes: c0303efeab ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04e906839a upstream.
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
