Commit graph

388,138 commits

Author SHA1 Message Date
Nobuhiro Iwamatsu
ddcd91c6b8 sh_eth: use EDSR_ENALL to set EDSR
Use now always available EDSR_ENALL instead of the bare number to set EDSR.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
[Sergei: added the changelog, reworded the subject, changing the prefix.]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-06 16:04:03 -07:00
Nobuhiro Iwamatsu
41d5ffeb9d sh_eth: remove #ifdef around EDSR and GECMR bit definitions
Remove #ifdef around 'enum EDSR_BIT' and 'enum GECMR_BIT', replacing it with the
comments on which SoCs these registers exist.

SH7757 also has EDSR, so add a comment about it to 'enum EDSR_BIT'.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
[Sergei: folded in the former patch #2, updated the changelog, reworded the
subject, changing the prefix.]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-06 16:04:03 -07:00
Chen Gong
ace3647afb ACPI/APEI: Update einj documentation for param1/param2
To ensure EINJ working well when injecting errors via EINJ
table, add some restrictions: param1 must be a valid physical
RAM address and param2 must specify page granularity or
narrower.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-06-06 15:28:11 -07:00
Greg Kroah-Hartman
1c83d94ff6 xHCI: USB 2.0 Link PM and misc cleanup patches
Hi Greg,
 
 Here's six patches to be queued for 3.11.
 
 The first four add support for a new type of host hardware-managed USB
 2.0 Link Power Management.  Hosts with BESL support, including Intel
 Haswell ULT systems, will now be able to have USB 2.0 devices go into
 the lower power link state (L1) in between packets.  These patches have
 been tested on Haswell ULT platforms with USB 2.0 webcams that support
 Link PM.
 
 The other two patches are clean up.  One from Julius clarifies the xHCI
 endpoint context debugging to make it consistent with standard endpoint
 addresses, instead of xHCI endpoint context indexes.  The one from Alex
 changes the xHCI driver to be consistent about passing a void pointer to
 the xHCI IRQ handler.
 
 Sarah Sharp
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRsPbvAAoJEBMGWMLi1Gc5Gq8P/RZ31S1KWeB0psXXYbrm9Slq
 79VP3cBYdx7FzBw87bDGDQ3KNsircMLkwVpWjpP3K3y3JFRgK8iUvs4rmd1xiqC3
 Mx6UjHYhiIDKukI79Dg7hHFizD0dx3u6iQc+CBagQs7YH7o/EEFwX4UaNA3LbYq8
 jC6mrAGPHjR5kfU5wtYizFLZo5FMlquGfNjCg8xabl3aOqEDtOZ3K8B2PVYfVMzh
 RC+dat4cCyBJXSXoA/vqXZ7OOLFM+knTKWlaYevemA2a4PYGd25uMziTTto9TA9I
 KrUx0UQa7s8PfCWsnX+sW152dUeVaeamDcxAKaYv2XcXDZhRuZQSTdsmDpmWILm/
 pqEaQJgSQhq0dbmNG1mlaSw9MXO85Nq9eetkAgJ1wKmF/P1z7Q31KH0Ss/5MvjHG
 VjoN3mo5Tb0GlitIoB/SVsMqjlUMtCGdJSG7z16M6G9CQd2Qu8riJgg9K8ZdBYty
 IrjR/ypeoOJWtHd3CdnyFcyIN9eBaDpjALSM2WWexndS7+tLmo67xWgDZC19iX3/
 Q78nHdcjVBhcV/vH7DlF7PQA+fXkBfvkIelPqgxhvd5Wia8j5Qtm61QkPxZ5zDac
 3tGmW8JgRLCVMzVccE+0I4EypWf6+UWadpJx/YIdL12FEWs8Qv+W3IjwLSmSo4Gk
 Vt8TbDSIVBezNXrLDpN7
 =NDUW
 -----END PGP SIGNATURE-----

Merge tag 'for-usb-next-2013-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next

Sarah writes:

xHCI: USB 2.0 Link PM and misc cleanup patches

Hi Greg,

Here's six patches to be queued for 3.11.

The first four add support for a new type of host hardware-managed USB
2.0 Link Power Management.  Hosts with BESL support, including Intel
Haswell ULT systems, will now be able to have USB 2.0 devices go into
the lower power link state (L1) in between packets.  These patches have
been tested on Haswell ULT platforms with USB 2.0 webcams that support
Link PM.

The other two patches are clean up.  One from Julius clarifies the xHCI
endpoint context debugging to make it consistent with standard endpoint
addresses, instead of xHCI endpoint context indexes.  The one from Alex
changes the xHCI driver to be consistent about passing a void pointer to
the xHCI IRQ handler.

Sarah Sharp
2013-06-06 15:21:02 -07:00
Chen Gong
c5a130325f ACPI/APEI: Add parameter check before error injection
When param1 is enabled in EINJ but not assigned with a valid
value, sometimes it will cause the error like below:

APEI: Can not request [mem 0x7aaa7000-0x7aaa7007] for APEI EINJ Trigger registers

It is because some firmware will access target address specified in
param1 to trigger the error when injecting memory error. This will
cause resource conflict with regular memory. So It must be removed
from trigger table resources, but incorrect param1/param2
combination will stop this action. Add extra check to avoid
this kind of error.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-06-06 15:20:51 -07:00
H. Peter Anvin
60e019eb37 x86: Get rid of ->hard_math and all the FPU asm fu
Reimplement FPU detection code in C and drop old, not-so-recommended
detection method in asm. Move all the relevant stuff into i387.c where
it conceptually belongs. Finally drop cpuinfo_x86.hard_math.

[ hpa: huge thanks to Borislav for taking my original concept patch
  and productizing it ]

[ Boris, note to self: do not use static_cpu_has before alternatives! ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1367244262-29511-2-git-send-email-bp@alien8.de
Link: http://lkml.kernel.org/r/1365436666-9837-2-git-send-email-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-06-06 14:32:04 -07:00
Mark Langsdorf
d50b110f14 sata highbank: add bit-banged SGPIO driver support
Highbank supports SGPIO by bit-banging out the SGPIO signals over
three GPIO pins defined in the DTB. Add support for this SGPIO
functionality.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-06 14:05:24 -07:00
Mark Langsdorf
439d7a358f ahci: make ahci_transmit_led_message into a function pointer
Create a new ata_port_operations function pointer called
transmit_led_message and give it the default value of
ahci_transmit_led_message. This allows AHCI controllers with
non-standard LED interfaces to use the existing em_ interface.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-06 14:05:23 -07:00
Betty Dall
081d0fe0ef PCI/AER: Reset link for devices below Root Port or Downstream Port
When a PCIe device reports a fatal error, we reset the link leading
to it.  Previously we only did this for devices below Downstream Ports,
not for devices directly below Root Ports.

This patch changes that so we reset the link leading to devices below
Root Ports just like we do for those below Downstream Ports.

[bhelgaas: changelog, keep dev_printk(KERN_DEBUG)]
Signed-off-by: Betty Dall <betty.dall@hp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06 15:00:04 -06:00
Betty Dall
0ba98ec919 ACPI / APEI: Force fatal AER severity when component has been reset
The CPER error record has a reset bit that indicates that the platform
has reset the component. The reset bit can be set for any severity
error including recoverable.  From the AER code path's perspective,
any error is fatal if the component has been reset.  This patch
upgrades the severity of the AER recovery to AER_FATAL whenever the
CPER error record indicates that the component has been reset.

[bhelgaas: s/bus has been reset/component has been reset/]
Signed-off-by: Betty Dall <betty.dall@hp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06 14:39:16 -06:00
Betty Dall
fde41b9fa2 PCI/AER: Remove "extern" from function declarations
We had an inconsistent mix of using and omitting the "extern" keyword
on function declarations in header files.  This removes them all.

[bhelgaas: split out from "move AER severity defines" patch]
Signed-off-by: Betty Dall <betty.dall@hp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06 14:37:07 -06:00
Daniel Vetter
bb76006379 drm/i915: pipe config quirk infrastructure plus sdvo mode.flags fix
For various reasons the hw state readout might not be able to
faithfully match the hw state:
- broken hw (like the case which motivated this patch here where the
  sdvo encoder does not implemented mandatory functionality
  correctly).
- platforms which are not supported fully with the pipe config
  infrastructure
- if our code doesn't support a given hw configuration natively, e.g.
  special restrictions on the per-pipe panel fitters when they're used
  in high-quality scaling modes.

In all these cases both fastboot and the hw state cross checker need
to be aware of these cases and act accordingly. To be able to do this
add a new quirk flag to the pipe config structure.

The specific case at hand is an sdvo encoder which doesn't implement
the get_timings function, so adjusted_mode flags will be wrong. The
strange thing though is that the encoder _does_ work, even though it
doesn't implement any of the timings functions (so neither get nor
set, neither for input nor output timings).

Not that non-compliant sdvo encoder are any surprise at all ...

v2:
- Don't read random garbage from the dtd if the get_timings call
  failed (suggested by Chris).
- Still check the interlaced flag, that's read out from someplace
  else. We want maximal paranoia, after all.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-06 22:35:44 +02:00
Betty Dall
9e50a9122f PCI/AER: Move AER severity defines to aer.h
The function aer_recover_queue() is a public interface and the
severity argument uses #defines that are in the private header
pci/pcie/aer/aerdrv.h.

This patch moves the #defines from pci/pcie/aer/aerdrv.h to
include/linux/aer.h.

[bhelgaas: split "remove 'extern' from declarations" to another patch]
Signed-off-by: Betty Dall <betty.dall@hp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06 14:34:14 -06:00
Bjorn Helgaas
8d2a171f18 PCI/AER: Set dev->__aer_firmware_first only for matching devices
Previously, we always updated info->firmware_first, even for HEST entries
that didn't match the device.  Therefore, if the last HEST descriptor was
a PCIe structure that didn't match the device, we always cleared
dev->__aer_firmware_first.

Tested-by: Betty Dall <betty.dall@hp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06 14:33:38 -06:00
Bjorn Helgaas
a6bd73cdc9 PCI/AER: Factor out HEST device type matching
This factors out the matching of HEST structure type and PCIe device type
to improve readability.  No functional change.

Tested-by: Betty Dall <betty.dall@hp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06 14:33:27 -06:00
Bjorn Helgaas
8b8d2b658f PCI/AER: Don't parse HEST table for non-PCIe devices
AER is a PCIe-only capability, so there's no point in trying to match
a HEST PCIe structure with a non-PCIe device.

Previously, a HEST global AER bridge entry (type 8) could incorrectly
match *any* bridge, even a legacy PCI-PCI bridge, and a non-global
HEST entry could match a legacy PCI device.

Tested-by: Betty Dall <betty.dall@hp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-06 14:31:42 -06:00
Trond Myklebust
c45ffdd269 NFSv4: Close another NFSv4 recovery race
State recovery currently relies on being able to find a valid
nfs_open_context in the inode->open_files list.
We therefore need to put the nfs_open_context on the list while
we're still protected by the sp->so_reclaim_seqcount in order
to avoid reboot races.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:44 -04:00
Trond Myklebust
275bb30786 NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:43 -04:00
Trond Myklebust
3efb972247 NFSv4: Refactor _nfs4_open_and_get_state to set ctx->state
Instead of having the callers set ctx->state, do it inside
_nfs4_open_and_get_state.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:42 -04:00
Trond Myklebust
4197a055eb NFSv4: Cleanup: pass the nfs_open_context to nfs4_do_open
All the callers have an open_context at this point, and since we always
need one in order to do state recovery, it makes sense to use it as the
basis for the nfs4_do_open() call.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:42 -04:00
Trond Myklebust
1a1a29fa84 NFSv4: Remove redundant check for FMODE_EXEC in nfs_finish_open
We already check the EXEC access mode in the lower layers.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:41 -04:00
Trond Myklebust
9ec2ef53b9 SUNRPC: Remove redundant call to rpc_set_running() in __rpc_execute()
The RPC_TASK_RUNNING flag will always have been set in rpc_make_runnable()
once we get past the test for out_of_line_wait_on_bit() returning
ERESTARTSYS.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:40 -04:00
Trond Myklebust
74fe5f7c2a SUNRPC: Remove unused functions rpc_task_set/has_priority
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:40 -04:00
Trond Myklebust
64bbe3d670 SUNRPC: Remove the unused helpers task_for_each() and task_for_first()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:39 -04:00
Trond Myklebust
0053a8e65c SUNRPC: Remove unused function rpc_queue_empty
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:39 -04:00
Trond Myklebust
a76580fbf0 SUNRPC: Fix a potential race in rpc_execute
If the rpc_task is asynchronous, it could theoretically finish executing
on the workqueue it was assigned by rpc_make_runnable() before we get
round to testing RPC_IS_ASYNC() in rpc_execute.

In practice, however, all the existing callers hold a reference to the
rpc_task, so this can't happen today...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:38 -04:00
Trond Myklebust
5cc2216db8 NFSv4.1: Simplify setting the layout header credential
ctx->cred == ctx->state->owner->so_cred, so let's just use the former.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:38 -04:00
Trond Myklebust
4f0b429df1 NFSv4.1: Enable state protection
Use the EXCHGID4_FLAG_BIND_PRINC_STATEID exchange_id flag to enable
stateid protection. This means that if we create a stateid using a
particular principal, then we must use the same principal if we
want to change that state.
IOW: if we OPEN a file using a particular credential, then we have
to use the same credential in subsequent OPEN_DOWNGRADE, CLOSE,
or DELEGRETURN operations that use that stateid.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:37 -04:00
Trond Myklebust
cd5875fefe NFSv4.1: Use layout credentials for get_deviceinfo calls
This is not strictly needed, since get_deviceinfo is not allowed to
return NFS4ERR_ACCESS or NFS4ERR_WRONG_CRED, but lets do it anyway
for consistency with other pNFS operations.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:37 -04:00
Trond Myklebust
ab7cb0dfab NFSv4.1: Ensure that test_stateid and free_stateid use correct credentials
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:36 -04:00
Trond Myklebust
965e9c23de NFSv4.1: Ensure that reclaim_complete uses the right credential
We want to use the same credential for reclaim_complete as we used
for the exchange_id call.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:35 -04:00
Trond Myklebust
9556000d8c NFSv4.1: Ensure that layoutreturn uses the correct credential
We need to use the same credential as was used for the layoutget
and/or layoutcommit operations.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:35 -04:00
Trond Myklebust
6ab59344d9 NFSv4.1: Ensure that layoutget is called using the layout credential
Ensure that we use the same credential for layoutget, layoutcommit and
layoutreturn.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-06 16:24:34 -04:00
Aaro Koskinen
877ea664f6 staging: octeon-usb: cvmx-usbcx-defs.h: reformat license text to fit 80 cols
Reformat the original license text to fit in 80-column terminal. No
change in wording.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:15:04 -07:00
Aaro Koskinen
56ac87dbae staging: octeon-usb: cvmx-usbcx-defs.h: delete CVS keyword marker
Delete CVS keyword marker and a comment that the file is autogenerated.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:15:04 -07:00
Aaro Koskinen
1337de71a9 staging: octeon-usb: cvmx-usbcx-defs.h: avoid long lines in comments
Format all comments (except license text) to fit to 80 column terminals.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:15:04 -07:00
Aaro Koskinen
3d3792e91f staging: octeon-usb: cvmx-usbcx-defs.h: clean up macros
Use helper macros to avoid copy-paste and too long lines.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:15:03 -07:00
Aaro Koskinen
8f55eb2ee3 staging: octeon-usb: cvmx-usbcx-defs.h: delete unused macros
Delete some unused macros.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:15:03 -07:00
Aaro Koskinen
ebf5950a9a staging: octeon-usb: cvmx-usbcx-defs.h: fix comment style
Adjust struct member comments to be closer to kernel-doc format.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:15:03 -07:00
Aaro Koskinen
215f7493f5 staging: octeon-usb: cvmx-usbcx-defs.h: fix struct indentation
Fix struct indentation.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:13:58 -07:00
Aaro Koskinen
ceba5567fd staging: octeon-usb: cvmx-usbcx-defs.h: fix brace placement
Fix placement of braces in structs and unions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:13:57 -07:00
Aaro Koskinen
8aaefbef65 staging: octeon-usb: cvmx-usbcx-defs.h: delete unused union members
Delete unused union members.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:13:57 -07:00
Aaro Koskinen
a972c4830d staging: octeon-usb: cvmx-usbcx-defs.h: delete unused data types
Delete unused data types.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:12:44 -07:00
Aldo Iljazi
2dad6e4688 Staging: ft1000-pcmcia: ft1000_dnld.c: fixed four checkpatch
Fixed four checkpatch error complains, specifically:
ft1000_dnld.c:512: ERROR: space prohibited after that '&' (ctx:WxW)
ft1000_dnld.c:514: ERROR: space prohibited after that '&' (ctx:WxW)
ft1000_dnld.c:694: ERROR: space prohibited before that close parenthesis ')'
ft1000_dnld.c:713: ERROR: space prohibited before that close parenthesis ')'

Signed-off-by: Aldo Iljazi <neonsync1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:12:43 -07:00
Thomas Pugliese
3a57aa8161 wusbcore wire adapter: ignore HWA_NOTIF_BPST_ADJ notifications
No action is needed for the HWA_NOTIF_BPST_ADJ event.  Ignore it instead
of printing a warning to the log since these events can happen dozens of
times per second.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:11:14 -07:00
Thomas Pugliese
3e6159eefd UWB: HWA: add support for Alereon 5310 and 5611 devices
This patch adds support for the Alereon 5310 and 5611 devices to the
HWA-rc driver.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:11:14 -07:00
Fabio Estevam
f0f6b80368 serial: imx: Improve Kconfig text
Some improvements in the Kconfig text:

- Vendor is Freescale now
- Provide a better example for the console parameter, which is something like
console=ttymxc0
- Do not pass the names of ancient bootloaders

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:09:55 -07:00
Fabio Estevam
37fb5b5604 serial: imx: Allow module build
There is no need to only allow the serial driver to be built-in.

Allow the imx serial driver to be built as a module.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:09:55 -07:00
Fabio Estevam
e8bfa76073 serial: imx: Fix warning when !CONFIG_SERIAL_IMX_CONSOLE
When CONFIG_SERIAL_IMX_CONSOLE is not selected the following build warnings
appear:

drivers/tty/serial/imx.c:274:13: warning: 'imx_port_ucrs_save' defined but not used [-Wunused-function]
drivers/tty/serial/imx.c:283:13: warning: 'imx_port_ucrs_restore' defined but not used [-Wunused-function]

imx_port_ucrs_save() and imx_port_ucrs_restore() are only used when
CONFIG_CONSOLE_POLL or CONFIG_SERIAL_IMX_CONSOLE are selected, so protect these
functions declaration with a proper ifdef.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:09:55 -07:00
Alexey Khoroshilov
9f6d20ff84 tty/serial/sirf: fix error propagation in sirfsoc_uart_probe()
If pinctrl_get_select_default() fails, sirfsoc_uart_probe()
returns IS_ERR(result) instead of PTR_ERR(result).

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 13:07:05 -07:00