Commit 23e8b470c7 ("net: dsa: mv88e6xxx: Add devlink param for ATU
hash algorithm.") introduced ATU hash algorithm access via devlink, but
did not enable it for the 6320 family. Do it now.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-6-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 9e907d739c ("net: dsa: mv88e6xxx: add POT operation") did not
add the .pot_clear() method to the 6321 switch operations structure.
Add them now.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-4-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 6320 family supports the ALT_SPEED bit on ports 2, 5 and 6. Allow
this speed by implementing 6320 family specific .port_set_speed_duplex()
method.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-3-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .port_max_speed_mode() method is not used anymore since commit
40da0c32c3 ("net: dsa: mv88e6xxx: remove handling for DSA and CPU ports").
Drop it.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260504152653.1389394-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pfcp does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used
for tunnel setup and teardown.
Let's store struct sock directly in struct pfcp_dev.
pfcp_del_sock() is called from dev->netdev_ops->ndo_uninit().
The 2nd synchronize_net() in unregister_netdevice_many_notify()
ensures that inflight pfcp RX fast paths finish before pfcp_dev
is freed.
Note that synchronize_rcu() is added in the error path of
pfcp_newlink() since free_netdev() will free pfcp_dev immediately
once we remove synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-14-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
amt does not need to access struct socket itself in the fast path;
it only reads struct sock, and struct socket is only used for tunnel
setup and teardown.
Let's store struct sock directly in struct amt.
amt_dev_stop() is called as dev->netdev_ops->ndo_stop().
synchronize_net() in unregister_netdevice_many_notify() ensures
that inflight amt RX fast paths finish before amt_dev is freed.
amt no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Note that amt_dev_stop() looks buggy; cancel_delayed_work_sync()
should be called after udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-13-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bareudp does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used
for tunnel setup and teardown.
Let's store struct sock directly in struct bareudp_dev.
bareudp_sock_release() is called from dev->netdev_ops->ndo_stop().
synchronize_net() in unregister_netdevice_many_notify() ensures that
inflight bareudp RX fast paths finish before bareudp_dev is freed.
bareudp no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
geneve does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used for
tunnel setup and teardown.
Let's store struct sock directly in struct geneve_sock.
__geneve_sock_release() frees geneve_sock with kfree_rcu(), so
geneve no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will remove synchronize_rcu() in udp_tunnel_sock_release().
We must ensure that vxlan_sock is freed after inflight RX fast path.
Let's free vxlan_sock with kfree_rcu().
Note that vxlan_sock.vni_list[] is 8K and struct rcu_head must
be placed before it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3cf7203ca6 ("net/tunnel: wait until all sk_user_data
reader finish before releasing the sock") added synchronize_rcu()
in udp_tunnel_sock_release().
This was intended to protect the fast path of a dying vxlan device
from dereferencing vxlan_sock->sock->sk after sock_orphan() has set
sock->sk to NULL.
However, vxlan does not need to access struct socket itself in the
fast path; it only reads struct sock, and struct socket is only
used for tunnel setup and teardown.
Let's store struct sock directly in struct vxlan_sock.
In the next patch, we will free vxlan_sock with kfree_rcu(), then
vxlan no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_tunnel_sock_release() could set sk->sk_user_data to NULL
while vxlan_gro_prepare_receive() is running.
Let's check if rcu_dereference_sk_user_data() is NULL after
skb_gro_remcsum_init().
Fixes: 5602c48cf8 ("vxlan: change vxlan to use UDP socket GRO")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel_notify_{add,del}_rx_port() do not need
struct socket.
Let's change udp_tunnel_notify_{add,del}_rx_port() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel_{push,drop}_rx_port() do not need struct socket.
Let's change udp_tunnel_{push,drop}_rx_port() to take struct
sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel6_dst_lookup() does not need struct socket.
Let's change udp_tunnel6_dst_lookup() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even setup_udp_tunnel_sock() does not need struct socket.
Let's change setup_udp_tunnel_sock() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
While the UDP tunnel interface accepts struct socket, this
encourages users to store the pointer unnecessarily. This
leads to extra dereferences when accessing struct sock fields
(e.g., sk->sk_user_data instead of sock->sk->sk_user_data).
Furthermore, these dereferences necessitate synchronize_rcu()
in udp_tunnel_sock_release() to protect the fast paths from
sock_orphan() setting sk->sk_socket to NULL.
This overhead can be avoided if users store the struct sock
pointer directly in their private structures.
As a prep, let's change udp_tunnel_sock_release() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document the MDIO interface topology with an ASCII diagram
showing the MAC, PCS (MMD 3), FEC, Separated PMA (MMD 8), and PMD
(MMD 1) blocks and their interconnects. The diagram illustrates how
4 lanes connect the MAC through PCS, FEC, and PMA, then narrow to
2 lanes at the PMD.
The c45 read and write routines are enhanced to support
read and write of the separated PMA for the fbnic.
Co-developed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260430150802.3521-4-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Consolidate the register reads for boiler plate registers
to reduce LOC and cleanup pcs reads for DEVS1 to
fetch overrides for reserved bits that the hardware does not
return.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260430150802.3521-3-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add airoha_fe_get() and airoha_qdma_get() as utility routines for reading
a masked field from a specified register.
This is a non-functional refactor, no logical changes are introduced to
the existing codebase.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260501-airoha_fe_get-airoha_qdma_get-v3-1-126c6f647ccb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace magic number with register bit macros. The description of
the RTL8211B interrupt register is obtained from publicly available
datasheet (RTL8211B(L) Rev. 1.5 Datasheet)
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20260502092857.156831-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a CVM environment, hardware responses cannot be trusted. The
GDMA_QUERY_MAX_RESOURCES command returns resource limits used to
determine the maximum number of queues.
In mana_gd_query_max_resources(), gc->max_num_queues is initialized
from num_online_cpus() and successively clamped by the hardware-reported
max_eq, max_cq, max_sq, max_rq, and num_msix_usable values. If any of
these hardware values is zero, gc->max_num_queues becomes zero and the
function returns success. This leads to a confusing failure later when
alloc_etherdev_mq() is called with zero queues, returning NULL and
producing a misleading -ENOMEM error.
Add an explicit zero check for gc->max_num_queues after all clamping
steps and return -ENOSPC for a clear early failure, consistent with the
existing gc->num_msix_usable <= 1 guard.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/20260430083627.1873757-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a part of MANA hardening for CVM, validate that max_num_sq and
max_num_rq returned by MANA_QUERY_VPORT_CONFIG are not zero. These
values flow into apc->num_queues, which is used as an allocation count
and loop bound. A zero value would result in zero-size allocations and
incorrect driver behavior.
Return -EPROTO if either value is zero.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260430085638.1875400-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Realtek RTL8221B Ethernet PHY supports three LED pins which are used to
indicate link status and activity. Add netdev trigger support for them.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260501100002.755672-1-amadeus@jmu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduced by commit ad1df4f2d5 ("ice: dpll: Support E825-C SyncE and
dynamic pin discovery"):
ice_dpll.c: In function ‘ice_dpll_init’:
ice_dpll.c:3588:59: error: ‘%u’ directive output may be truncated
writing between 1 and 10 bytes into a region of size 4
[-Werror=format-truncation=] snprintf(pin_name, sizeof(pin_name),
"rclk%u", i);
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-13-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make ice driver access @pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-12-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice driver reports a helpful status message when updating firmware
indicating what action is necessary to enable the new firmware. This is
done because some updates require power cycling or rebooting the machine
but some can be activated via devlink.
The ice driver only supports activating firmware with the specific action
of "fw_activate" a bare "devlink dev reload" will *not* update the
firmware, and will only perform driver reinitialization.
Update the status message to explicitly reflect that the reload must use
the fw_activate action.
I considered modifying the text to spell out the full command, but felt
that was both overkill and something that would belong better as part of
the user space program and not hard coded into the kernel driver output.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-11-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i40e_ptp_set_timestamp_mode() function is responsible for configuring
hardware timestamping. When programming receive timestamping, the logic
must determine how to configure the PRTTSYN_CTL1 register for receive
timestamping.
The i40e hardware does not support timestamping all frames. Instead,
timestamps are captured into one of the four PRTTSYN_RXTIME registers.
Currently, the driver configures hardware to timestamp all V2 packets on
ports 319 and 320, including all message types. This timestamps
significantly more packets than is actually requested by the
HWTSTAMP_FILTER_PTP_V2_EVENT filter type.
The documentation for HWTSTAMP_FILTER_PTP_V2_EVENT indicates that it should
timestamp PTP v2 messages on any layer, including any kind of event
packets.
Timestamping other packets is acceptable, but not required by the filter.
Doing so wastes valuable slots in the Rx timestamp registers. For most
applications this doesn't cause a problem. However, for extremely high
rates of messages, it becomes possible that one of the critical event
packets is not timestamped.
The PTP protocol only requires timestamps for event messages on port 319,
but hardware is timestamping on both 319 and 320, and timestamping message
types which do not need a timestamp value.
The i40e hardware actually has a more strict filtering option. First, only
timestamp layer 4 messages on port 319 instead of both 319 and 320. Second,
note that hardware has a specific mode to timestamp only event packets
(those with message type < 8).
Update the configuration to use the strict mode that only timestamps event
messages, switching the TSYNTYPE field from 10b to 11b which limits the
timestamping only to eventpackets with a Message Type of < 8. Note that the
X700 series datasheet seems to indicate that the V2MSESTYPE field is no
longer relevant. However, we only tested and validated with leaving the
V2MESSTYPE field set to 0xF for the "wildcard" behavior it documents. This
might not be required but it in that case setting it appears harmless, so
leave it as is.
This avoids wasting the valuable Rx timestamp register slots on non-event
frames, and may reduce faults when operating under high event rates.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-10-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbe_host_interface_command() treats its buffer as a u32 array. The
local buffer we pass in was a union of byte-sized fields, which gives
it 1-byte alignment on the stack. On strict-align architectures this
can cause unaligned 32-bit accesses.
Add a u32 member to union ixgbe_hic_hdr2 so the object is 4-byte
aligned, and pass the u32 member when calling
ixgbe_host_interface_command().
No functional change on x86; prevents unaligned accesses on
architectures that enforce natural alignment.
Fixes: 49425dfc74 ("ixgbe: Add support for x550em_a 10G MAC type")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: 6a14ee0cfb ("ixgbe: Add X550 support function pointers")
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-9-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add E610 specific implementation of .get_eee() and .set_eee() ethtool
callbacks.
Introduce ixgbe_setup_eee_e610() which is used to set EEE config
on E610 device via ixgbe_aci_set_phy_cfg() (0x0601 ACI command).
Assign it to dedicated mac operation.
E610 devices support EEE feature specifically for 2.5, 5 and 10G link
speeds. When user try to set EEE for unsupported speeds log it.
Setting timer and setting EEE advertised speeds are not yet supported.
EEE shall be enabled by default for E610 devices.
Add EEE statuis logging during link watchdog run.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-6-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make this part of the code mode reusable move all
EEE input checks out of ixgbe_set_eee().
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-5-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There were recent changes in some of the ACI commands,
which have been extended with EEE related fields.
Set PHY Config, Get PHY Caps and Get Link Info have been
affected.
Align SW structs to the recent FW changes.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-4-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since FW version 1.40, buffer size of the 0x601 cmd has been increased
by 2B - from 24 to 26B. Buffer has been extended with new field
which can be used to configure EEE entry delay.
Pre-1.40 FW versions still expect 24B buffer and throws error when
receipts 26B buffer. To keep compatibility, check whether EEE
device capability flag is set and basing on it use appropriate
size of the command buffer.
Additionally place Set PHY Config capabilities defines out of
structs definitions.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-3-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Despite there was no EEE (Energy Efficient Ethernet) feature
support for E610 adapters, eee_speeds_supported variable was
defined and even initialized with some EEE speeds.
As E610 adapter supports EEE only for 10G, 5G and 2.5G speeds,
update hw.phy.eee_speeds_supported. Remove unsupported speeds -
10M, 100M and 1G.
Add also entry for 5G speed in EEE speeds mapping array used
by ethtool callbacks.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-2-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add detecting and parsing EEE device capability.
Recently EEE functionality support has been introduced to E610 FW.
Currently ixgbe driver has no possibility to detect whether NVM
loaded on given adapter supports EEE.
There's dedicated device capability element reflecting FW support
for given EEE link speed.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260430-jk-iwl-net-next-2026-04-30-v1-1-6f27ae1cd073@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dealing long registers with u64 is good, until you realize there are
longer 96-bit registers.
Refactor reg64 helpers to use u32 arrays instead of u64 values, in
preparation for 96-bit registers. We do not keep the separate u64
version for reg64 to avoid duplicated wrappers, although it looks better
when dealing with reg64 *only*.
Helpers for reg96 should be added when they are actually used to avoid
function unused warnings.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260430114529.3536911-3-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers might have error messages to propagate to user space. Propagate
the netlink extack so that they can inform user space in a verbal way of
their limitations.
Make the according transformations to the two users (sja1105 and felix).
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260430114529.3536911-2-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When creating an alias FT for MPV IPsec, if alias creation with
sw_vhca_id is supported use it instead of using the hw_vhca_id.
This in turn allows IPsec to work properly after live migration,
in case a VF was live migrated and his hw_vhca_id changed due to
migration which can happen if you migrate to a VF with a different index
than yours, IPsec would fail to start post migration, this patch
resolves the issue by using sw_vhca_id instead which doesn't change post
migration.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260430061958.225245-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add mlx5_dma_pool alloc/free paths, and wire mlx5_frag_buf allocation
and free paths to use them.
mlx5_frag_buf_alloc_node() now selects an mlx5_dma_pool to allocate
fragments from, instead of directly allocating full coherent pages.
mlx5_frag_buf_free() frees from the respective pool.
mlx5_dma_pool_alloc() keeps allocation fast by maintaining pages with
available indexes at the head of the list, so the common allocation path
can take a free index immediately. New backing pages are allocated only
when no free index is available.
mlx5_dma_pool_free() returns released indexes to the pool and frees a
backing page once all of its indexes become free. This avoids keeping
fully free pages for the lifetime of the pool and reduces coherent DMA
memory footprint.
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260429201429.223809-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce mlx5 DMA pool and pool-page data structures, and add the
creation and teardown paths.
Each NUMA node owns a set of mlx5_dma_pool instances, each one with a
different block size. The sizes are defined as all powers of two
starting from MLX5_ADAPTER_PAGE_SHIFT and up to PAGE_SHIFT. Since
mlx5_frag_bufs are used to back objects whose sizes are encoded relative
to MLX5_ADAPTER_PAGE_SHIFT, a smaller block_shift value cannot be used.
Requests larger than PAGE_SIZE continue to be handled as page-sized
fragments, as in the existing frag-buf allocation model.
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260429201429.223809-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wire mlx5_frag_buf pools init/cleanup hooks into
mlx5_mdev_init()/uninit() and the init unwind path.
Keep temporary no-op stubs in alloc.c so lifecycle ordering is in place
before the coherent DMA sub-page allocator implementation is added in
follow-up patches.
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260429201429.223809-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, hash_item() processes the 6-byte Ethernet address and the
2-byte session ID byte-wise to compute a hash.
Optimize this by using 16-bit word operations: XOR three 16-bit words
from the Ethernet address and the 16-bit session ID, then fold the
result. This reduces the total number of loads and XORs. The Ethernet
addresses in a skb and struct pppoe_addr are both 2-byte aligned, so the
u16 pointer cast is safe.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260429023848.153425-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As done for the SW path, configure the QoS channel for HW accelerated
traffic according to the user port index when forwarding to a DSA port,
or rely on the GDM port identifier otherwise. This allows HTB shaping
to be applied to HW accelerated traffic.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260430-airoha-ppe-qos-channel-v1-1-5ef9221e85c1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/Space.c is the last remnant of the linux-2.4.x driver model
that required each subsystem and device driver init function to be called
from init/main.c explicitly, before the introduction of initcall levels.
In linux-7.0, this was only used for a handful of ISA network drivers,
with the ne2000 driver being the last one.
Fold the code into ne.c directly, with minimal changes to preserve
the existing command line parsing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429145624.2948432-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cs89x0 driver is really two in one, and they are mutually exclusive:
- the ISA driver was used on 486-era PCs. It likely has no remaining
users, like the other ethernet drivers that got removed in
linux-7.1. The DMA support in here is the last device driver use of
the deprecated isa_bus_to_virt() interface, all other users are either
x86 specific or or got converted to the normal dma-mapping interface.
The driver was maintained by Andrew Morton at the time, based on
the linux-2.2 vendor driver from Cirrus Logic.
- the platform_driver instance was used on some embedded Arm boards
around the same time, such as the EP7211 Development Kit. This
is the same chip, but uses modern devicetree based probing and no DMA.
This was added by Alexander Shiyan.
Remove the ISA driver as a cleanup, including all of the outdated
documentation referring to its configuration.
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429145624.2948432-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5-next updates 2026-04-29
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Extend query_esw_functions output for multi-function support
net/mlx5: Remove unused host_sf_enable field
net/mlx5: Add function_id_type for enable/disable_hca cmds
mlx5: Rename the vport number enums for host PF and VF
====================
Link: https://patch.msgid.link/20260429212747.224411-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
-----BEGIN PGP SIGNATURE-----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=cEhV
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some new content already, notably:
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
* tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (39 commits)
wifi: brcmsmac: phy_lcn: Remove dead code in wlc_lcnphy_radio_2064_channel_tune_4313()
wifi: mac80211: always allow transmitting null-data on TXQs
wifi: mac80211: use kstrtobool_from_user() in debugfs callbacks
wifi: cfg80211: validate cipher suite for NAN Data keys
wifi: nl80211: check link is beaconing for color change
wifi: mac80211: clarify an 802.11 VHT spec reference
wifi: mac80211: fix per-station PHY capability bandwidth
wifi: mac80211: clarify per-STA bandwidth handling
wifi: nl80211: always validate AP operation/PHY regulatory
wifi: cfg80211: provide HT/VHT operation for AP beacon
wifi: nl80211: reject too short HT/VHT/HE/EHT capability/operation
wifi: cfg80211: move AP HT/VHT/... operation to beacon info
wifi: nl80211: reject beacons with bad HE operation
wifi: cfg80211: remove HE/SAE H2E required fields
wifi: mac80211: remove ieee80211_sta_cur_vht_bw()
wifi: mac80211: clean up ieee80211_sta_cap_rx_bw()
wifi: mac80211: clean up initial STA NSS/bandwidth handling
wifi: mac80211: clean up STA NSS handling
wifi: mac80211: simplify ieee80211_sta_rx_bw_to_chan_width()
wifi: nl80211: document channel opmode change channel width
...
====================
Link: https://patch.msgid.link/20260430120304.249081-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
