This patch modifies rds selftests to use the environment variable
SUDO_USER for tcpdumps if it is set. This is needed to avoid chown
operations on the vng 9pfs which is not supported. Passing a user
listed in sudoers avoids the tcpdump privilege drop which may
otherwise create empty pcaps
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-7-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch modifies the rds selftest to look for an env variable
RDS_LOG_DIR, and log all traces, pcaps and gcov collections to
the folder specified in RDS_LOG_DIR. If RDS_LOG_DIR is unset,
logs are not collected.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-6-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a -t flag to run.sh to optionally override the default
timeout. The --timeout flag is already supported in test.py,
so just add the shorthand -t flag
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-5-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a few pylint errors in test.py. Remove unused exception
variables from except blocks, and disable warnings for imports that cannot
appear at the start of the module. Also disable warnings for the
tcpdump processes. The suggestion to use a with block does not apply
here since the process needs to outlive the parent to collect the dumps.
Lastly add the module docstring at the top of the module.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The run.sh script does not have a -g flag. Update USAGE string with
correct flags. Also fix typo packet_duplcate -> packet_duplicate
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 400s time out was originally developed under a leaner
kernel config that booted much faster than a default config.
Boot up is included as part of the over all test runtime, as
well as any log collection done when the test is complete.
A slower config combined with the gcov enabled test means
we'll need more time to accommodate the boot up and log
collection. So, bump time out to 800s.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for extending to pacing hardware offload, convert the
so_txtime.sh test to a drv-net test that can be run against netdevsim
and real hardware.
Also update so_txtime.c to not exit on first failure, but run to
completion and report exit code there. This helps with debugging
unexpected results, especially when processing multiple packets,
as happens in the "reverse_order" testcase.
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
v6 -> v7
- update test to use new argument expect_fail
- v6 received Reviewed-by, but dropped due to above (minor) change
v5 -> v6
- fix order in tools/testing/selftests/drivers/net/config
v4 -> v5
- move qdisc setup/restore into each test
- add tc to utils.py (separate patch)
- test expected failure (separate patch)
- fix pylint
- convert fail to pass for timing errors if KSFT_MACHINE_SLOW
(cmd does not special case KSFT_SKIP process returncode yet)
Responses to sashiko review
- The test converts per packet failure to errors, to continue
testing other packets, but other error() cases are not in scope.
- The test starts sender and receiver at an absolute future time,
like the original test. This assumes ~msec scale sync'ed clocks.
- The tc qdisc replace command works fine with noqueue. Tested
manually.
v3 -> v4
- restore original qdisc after test
- drop unnecessary underscore in tap test names
v2 -> v3
- Makefile: so_txtime from YNL_GEN_FILES to TEST_GEN_FILES (Sashiko, NIPA)
v1 -> v2
- move so_txtime.c for net/lib to drivers/net (Jakub)
- fix drivers/net/config order (Jakub)
- detect passing when failure is expected (Jakub, Sashiko)
- pass pylint --disable=R (Jakub)
- only call ksft_run once (Jakub)
- do not sleep if waiting time is negative (Sashiko)
- add \n when converting error() to fprintf() (Sashiko)
- 4 space indentation, instead of 2 space
- increase sync delay from 100 to 200ms, to fix rare vng flakes
Link: https://patch.msgid.link/20260504174056.565319-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a wrapper similar to existing ip, ethtool, ... commands.
Tc takes a slightly different syntax. Account for that.
The first user is the next patch in this series, converting so_txtime
to drv-net. Pacing offload is supported by selected qdiscs only.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260504174056.565319-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support negative tests, where cmd raises an exception if the command
succeeded.
Add optional argument expect_fail to cmd and bkg. Where fail fails the
test on unexpected error, expect_fail fails it on unexpected success.
Both fail on negative return code. Python subprocess may set a
negative return code on process crash or timeout. Those are never
anticipated failures.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260504174056.565319-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enhance vlmc_query_intvl_test and vlmc_query_response_intvl_test in
bridge_vlan_mcast.sh to validate IGMPv3/MLDv2 protocol compliance for
MRC and QQIC field encoding across both linear and exponential ranges.
TEST: Vlan multicast snooping enable [ OK ]
TEST: Vlan mcast_query_interval global option default value [ OK ]
TEST: Number of tagged IGMPv2 general query [ OK ]
TEST: IGMPv3 QQIC linear value 60(s) [ OK ]
TEST: MLDv2 QQIC linear value 60(s) [ OK ]
TEST: IGMPv3 QQIC non linear value 160(s) [ OK ]
TEST: MLDv2 QQIC non linear value 160(s) [ OK ]
TEST: Vlan mcast_query_response_interval global option default value [ OK ]
TEST: IGMPv3 MRC linear value of 60(x0.1s) [ OK ]
TEST: MLDv2 MRC linear value of 24000(ms) [ OK ]
TEST: IGMPv3 MRC non linear value of 240(x0.1s) [ OK ]
TEST: MLDv2 MRC non linear value of 48000(ms) [ OK ]
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-6-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a single kselftest covering the proto_ops getsockopt_iter
conversions for AF_NETLINK and AF_VSOCK, using one fixture per protocol:
netlink:
NETLINK_PKTINFO covers the flag-style int path (exact size, oversize
clamp, undersize -EINVAL); NETLINK_LIST_MEMBERSHIPS covers the
size-discovery path that always reports the required buffer length back
via optlen, even when the user buffer is too small to receive any group
bits.
vsock:
SO_VM_SOCKETS_BUFFER_SIZE covers the u64 path (exact size, oversize
clamp, undersize -EINVAL).
Each fixture also exercises an unknown optname and a bogus level so
the returned-length / errno semantics preserved by the sockopt_t
conversion are pinned down.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260501-getsock_one-v1-3-810ce23ea70e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Certain devices which support ntuple-filters do not enable the feature
by default. The existing tests will skip (if they check for the feature),
or fail if they blindly attempt to install rules. Therefore, attempt to turn
on ntuple-filters if the device supports them.
Signed-off-by: Dimitri Daskalakis <daskald@meta.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260430165217.3700469-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests check syncookie mode is able to reconstruct some
client options when TCP TS are used:
- wscale option.
- sackOK.
- MSS (in a limited way, especially for IPv4).
- ECN : not enabled.
Note that IPv4 and IPv6 have different msstab[] values:
IPv4 msstab[4] = { 536, 1300, 1440, 1460 }
IPv6 msstab[4] = { 1280 - 60, 1480 - 60, 1500 - 60, 9000 - 60 }
IPv4 is currently capping SND_MSS to 1460, even on a 9K MTU network.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260430021444.2929534-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test cases to verify that ARP probes and DAD Neighbor Solicitations
are handled correctly by the bridge neighbor suppression feature.
When neighbor suppression is enabled on a bridge VXLAN port, the bridge
should reply to ARP/NS messages on behalf of remote hosts when both FDB
and neighbor entries exist, and the answer is known. However, when
either the FDB or the neighbor exists, ARP probes / DAD NS should be
treated like regular ARP requests / NS and flood to VXLAN.
Add two new test functions:
neigh_suppress_arp_probe(): Tests ARP probe handling by triggering
duplicate address detection using arping -D. Verifies that probes are
flooded when the bridge doesn't know the answer, and suppressed when FDB
and neighbor entries exist.
neigh_suppress_dad_ns(): Tests DAD NS handling by constructing DAD NS
packets using mausezahn and verifies correct flooding/suppression
behavior.
Before the previous patch:
$ ./test_bridge_neigh_suppress.sh -t "neigh_suppress_arp_probe neigh_suppress_dad_ns"
Per-port ARP probe suppression
------------------------------
TEST: ARP probe suppression [ OK ]
TEST: "neigh_suppress" is on [ OK ]
TEST: ARP probe suppression [FAIL]
TEST: FDB and neighbor entry installation [ OK ]
TEST: arping [FAIL]
TEST: ARP probe suppression [FAIL]
TEST: neighbor removal [ OK ]
TEST: ARP probe suppression [FAIL]
TEST: "neigh_suppress" is off [ OK ]
TEST: ARP probe suppression [FAIL]
Per-port DAD NS suppression
---------------------------
TEST: DAD NS suppression [ OK ]
TEST: "neigh_suppress" is on [ OK ]
TEST: DAD NS suppression [FAIL]
TEST: FDB and neighbor entry installation [ OK ]
TEST: DAD NS suppression [FAIL]
TEST: neighbor removal [ OK ]
TEST: DAD NS suppression [FAIL]
TEST: DAD NS proxy NA reply [FAIL]
TEST: "neigh_suppress" is off [ OK ]
TEST: DAD NS suppression [FAIL]
Tests passed: 10
Tests failed: 10
After the previous patch:
$ ./test_bridge_neigh_suppress.sh -t "neigh_suppress_arp_probe neigh_suppress_dad_ns"
Per-port ARP probe suppression
------------------------------
TEST: ARP probe suppression [ OK ]
TEST: "neigh_suppress" is on [ OK ]
TEST: ARP probe suppression [ OK ]
TEST: FDB and neighbor entry installation [ OK ]
TEST: arping [ OK ]
TEST: ARP probe suppression [ OK ]
TEST: neighbor removal [ OK ]
TEST: ARP probe suppression [ OK ]
TEST: "neigh_suppress" is off [ OK ]
TEST: ARP probe suppression [ OK ]
Per-port DAD NS suppression
---------------------------
TEST: DAD NS suppression [ OK ]
TEST: "neigh_suppress" is on [ OK ]
TEST: DAD NS suppression [ OK ]
TEST: FDB and neighbor entry installation [ OK ]
TEST: DAD NS suppression [ OK ]
TEST: neighbor removal [ OK ]
TEST: DAD NS suppression [ OK ]
TEST: DAD NS proxy NA reply [ OK ]
TEST: "neigh_suppress" is off [ OK ]
TEST: DAD NS suppression [ OK ]
Tests passed: 20
Tests failed: 0
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260429062405.1386417-3-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the kernel's TCP-AO implementation does the MAC and KDF
computations using the crypto_ahash API. This API is inefficient and
difficult to use, and it has required extensive workarounds in the form
of per-CPU preallocated objects (tcp_sigpool) to work at all.
Let's use lib/crypto/ instead. This means switching to straightforward
stack-allocated structures, virtually addressed buffers, and direct
function calls. It also means removing quite a bit of error handling.
This makes TCP-AO quite a bit faster.
This also enables many additional cleanups, which later commits will
handle: removing tcp-sigpool, removing support for crypto_tfm cloning,
removing more error handling, and replacing more dynamically-allocated
buffers with stack buffers based on the now-statically-known limits.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-3-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RFC 5926 (https://datatracker.ietf.org/doc/html/rfc5926) specifies the
use of AES-128-CMAC and HMAC-SHA1 with TCP-AO. This includes a
specification for how traffic keys shall be derived for each algorithm.
Support for any other algorithms with TCP-AO isn't standardized, though
an expired Internet Draft (a work-in-progress document, not a standard)
from 2019 does propose adding HMAC-SHA256 support:
https://datatracker.ietf.org/doc/html/draft-nayak-tcp-sha2-03
Since both documents specify the KDF for each algorithm individually, it
isn't necessarily clear how any other algorithm should be integrated.
Nevertheless, the Linux implementation of TCP-AO allows userspace to
specify the MAC algorithm as a string tcp_ao_add::alg_name naming either
"cmac(aes128)" or an arbitrary algorithm in the crypto_ahash API. The
set of valid strings is undocumented. The implementation assumes that
"cmac(aes128)" is the only algorithm that requires an entropy extraction
step and that all algorithms accept keys with length equal to the
untruncated MAC; thus, arbitrary HMAC algorithms probably do work, but
some other MAC algorithms like AES-256-CMAC have never actually worked.
Unfortunately, this undocumented string allows many obsolete, insecure,
or redundant algorithms. For example, "hmac(md5)" and the
non-cryptographic "crc32" are accepted. It also ties the implementation
to crypto_ahash and requires that most memory be dynamically allocated,
making the implementation unnecessarily complex and inefficient. Still
furthermore, this implementation requires the crypto API to support
"transformation cloning", whose only user is this feature.
Fortunately, it's very likely that only a few algorithms are actually
used in practice. Let's restrict the set of allowed algorithms to
"cmac(aes128)" (or "cmac(aes)" with keylen=16), "hmac(sha1)", and
"hmac(sha256)". The first two are the actually standard ones, while
HMAC-SHA256 seems like a reasonable algorithm to continue supporting as
a Linux extension, considering the Internet Draft for it and the fact
that SHA-256 is the usual choice of upgrade from the outdated SHA-1.
If any other algorithm ever turns out to be needed, e.g. HMAC-SHA512, it
can of course be (re-)added in library form. However, note that the TCP
options space limits TCP-AO MACs to 20 bytes (160 bits) anyway, which
limits the potential benefit of any further upgrade to the algorithm.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-2-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We had some issues with a suspected traffic imbalance on an RSS
context. Make sure the tests cover the RXFH field selection
vs additional contexts.
Tested-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260428203624.1224387-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minor clarifications in the README:
- call out what linters we expect to be clean
- make it clear that by "frameworks" we mean code under lib/
not just factoring code out in the same file
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Allow tracing for non-pKVM, which was accidentally disabled when
the series was merged
* Rationalise the way the pKVM hypercall ranges are defined by using
the same mechanism as already used for the vcpu_sysreg enum
* Enforce that SMCCC function numbers relayed by the pKVM proxy are
actually compliant with the specification
* Fix a couple of feature to idreg mappings which resulted in the
wrong sanitisation being applied
* Fix the GICD_IIDR revision number field that could never been
written correctly by userspace
* Make kvm_vcpu_initialized() correctly use its parameter instead
of relying on the surrounding context
* Enforce correct ordering in __pkvm_init_vcpu(), plugging a
potential pin leak at the same time
* Move __pkvm_init_finalise() to a less dangerous spot, avoiding
future problems
* Restore functional userspace irqchip support after a four year
breakage (last functional kernel was 5.18...).
* Spelling fixes
Selftests:
* Rename types across all KVM selftests to more closely align with types used
in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
* Fix Loongarch compilation.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnvHfwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO+DQf/eEi0jLfQc7EBn6JQNU9AhegPDu0s
o76HQwI1/NuKodV8txpNKISvkwvc6CVzatAJLJ781VYu+a/lI9EXOsZI8dnlbYy4
M6j0Lo58rneEkb5rplzo8+ds300OZeXQBOlC7loCmLakhtEOrdrmfTVmi+U3BqdP
Q15kCEymuLLqxQggRivd2flyKHT7vY2HeuYJa+ocnqV8qNNUKDmyIwPoTbZ44Plo
c+EU7rOSwvFlYFDP19oViIwoW89/vUkF762U0EkLcsWwB4k5L8qoybog9cYAJ9u4
AG7wmwczkOlJKFwrIDD2Fx8JARqSIZhitwzT+zA/aUOtOl8fRwRKfHpsWw==
=PoE5
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"On top of a lot of Arm fixes, this includes a massive rename of types
and variables in tools/testing/selftests/kvm - these were
unnecessarily different from what the kernel uses, so they're being
made consistent.
arm64:
- Allow tracing for non-pKVM, which was accidentally disabled when
the series was merged
- Rationalise the way the pKVM hypercall ranges are defined by using
the same mechanism as already used for the vcpu_sysreg enum
- Enforce that SMCCC function numbers relayed by the pKVM proxy are
actually compliant with the specification
- Fix a couple of feature to idreg mappings which resulted in the
wrong sanitisation being applied
- Fix the GICD_IIDR revision number field that could never been
written correctly by userspace
- Make kvm_vcpu_initialized() correctly use its parameter instead of
relying on the surrounding context
- Enforce correct ordering in __pkvm_init_vcpu(), plugging a
potential pin leak at the same time
- Move __pkvm_init_finalise() to a less dangerous spot, avoiding
future problems
- Restore functional userspace irqchip support after a four year
breakage (last functional kernel was 5.18...)
- Spelling fixes
Selftests:
- Rename types across all KVM selftests to more closely align with
types used in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
- Fix Loongarch compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: selftests: Add check_steal_time_uapi() implementation for LoongArch
KVM: arm64: Wake-up from WFI when iqrchip is in userspace
KVM: arm64: Fix initialisation order in __pkvm_init_finalise()
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
KVM: arm64: Fix kvm_vcpu_initialized() macro parameter
KVM: arm64: Fix FEAT_SPE_FnE to use PMSIDR_EL1.FnE, not PMSVer
KVM: arm64: Fix typo in feature check comments
KVM: arm64: Fix FEAT_Debugv8p9 to check DebugVer, not PMUVer
KVM: arm64: Reject non compliant SMCCC function calls in pKVM
KVM: arm64: vgic: Fix IIDR revision field extracted from wrong value
KVM: selftests: Replace "paddr" with "gpa" throughout
KVM: selftests: Replace "u64 nested_paddr" with "gpa_t l2_gpa"
KVM: selftests: Replace "u64 gpa" with "gpa_t" throughout
KVM: selftests: Replace "vaddr" with "gva" throughout
KVM: selftests: Clarify that arm64's inject_uer() takes a host PA, not a guest PA
KVM: selftests: Rename translate_to_host_paddr() => translate_hva_to_hpa()
KVM: selftests: Rename vm_vaddr_populate_bitmap() => vm_populate_gva_bitmap()
KVM: selftests: Rename vm_vaddr_unused_gap() => vm_unused_gva_gap()
KVM: selftests: Drop "vaddr_" from APIs that allocate memory for a given VM
KVM: selftests: Use u8 instead of uint8_t
...
The merge window pulled in the cgroup sub-scheduler infrastructure, and
new AI reviews are accelerating bug reporting and fixing - hence the
larger than usual fixes batch.
- Use-after-frees during scheduler load/unload. The disable path
could free the BPF scheduler while deferred irq_work / kthread work
was still in flight; cgroup setter callbacks read the active
scheduler outside the rwsem that synchronizes against teardown.
Fixed both, and reused the disable drain in the enable error paths
so the BPF JIT page can't be freed under live callbacks.
- Several BPF op invocations didn't tell the framework which runqueue
was already locked, so helper kfuncs that re-acquire the runqueue
by CPU could deadlock on the held lock. Fixed at the affected
callsites, including recursive parent-into-child dispatch.
- The hardlockup notifier ran from NMI but eventually took a
non-NMI-safe lock. Bounced through irq_work.
- A handful of bugs in the new sub-scheduler hierarchy: helper
kfuncs hard-coded the root instead of resolving the caller's
scheduler; the enable error path tried to disable per-task state
that had never been initialized, and leaked cpus_read_lock on the
way out; a sysfs object was leaked on every load/unload; the
dispatch fast-path used the root scheduler instead of the task's;
and a couple of CONFIG #ifdef guards were misclassified.
- Verifier-time hardening: BPF programs of unrelated struct_ops
types (e.g. tcp_congestion_ops) could call sched_ext kfuncs - a
semantic bug and, once sub-sched was enabled, a KASAN
out-of-bounds read. Now rejected at load. Plus a few NULL and
cross-task argument checks on sched_ext kfuncs, and a selftest
covering the new deny.
- rhashtable (Herbert): restored the insecure_elasticity toggle and
bounced the deferred-resize kick through irq_work to break a
lock-order cycle observable from raw-spinlock callers. sched_ext's
scheduler-instance hash is the first user of both.
- The bypass-mode load balancer used file-scope cpumasks; with
multiple scheduler instances now possible, those raced. Moved
per-instance, plus a follow-up to skip tasks whose recorded CPU is
stale relative to the new owning runqueue.
- Smaller fixes: a dispatch queue's first-task tracking misbehaved
when a parked iterator cursor sat in the list; the runqueue's
next-class wasn't promoted on local-queue enqueue, leaving an SCX
task behind RT in edge cases; the reference qmap scheduler stopped
erroring on legitimate cross-scheduler task-storage misses.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCafEN/A4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGaydAQCxWrUqnZXhxF4LnztjxTF2tgv7p8P7TbpS6aU6
etqRpAEA9RFmIXs7XrhwCm0n2BwSgjvrNxnWfPhWvuH0uN0GTAA=
=wLna
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"The merge window pulled in the cgroup sub-scheduler infrastructure,
and new AI reviews are accelerating bug reporting and fixing - hence
the larger than usual fixes batch:
- Use-after-frees during scheduler load/unload:
- The disable path could free the BPF scheduler while deferred
irq_work / kthread work was still in flight
- cgroup setter callbacks read the active scheduler outside the
rwsem that synchronizes against teardown
Fix both, and reuse the disable drain in the enable error paths so
the BPF JIT page can't be freed under live callbacks.
- Several BPF op invocations didn't tell the framework which runqueue
was already locked, so helper kfuncs that re-acquire the runqueue
by CPU could deadlock on the held lock
Fix the affected callsites, including recursive parent-into-child
dispatch.
- The hardlockup notifier ran from NMI but eventually took a
non-NMI-safe lock. Bounce it through irq_work.
- A handful of bugs in the new sub-scheduler hierarchy:
- helper kfuncs hard-coded the root instead of resolving the
caller's scheduler
- the enable error path tried to disable per-task state that had
never been initialized, and leaked cpus_read_lock on the way
out
- a sysfs object was leaked on every load/unload
- the dispatch fast-path used the root scheduler instead of the
task's
- a couple of CONFIG #ifdef guards were misclassified
- Verifier-time hardening: BPF programs of unrelated struct_ops types
(e.g. tcp_congestion_ops) could call sched_ext kfuncs - a semantic
bug and, once sub-sched was enabled, a KASAN out-of-bounds read.
Now rejected at load. Plus a few NULL and cross-task argument
checks on sched_ext kfuncs, and a selftest covering the new deny.
- rhashtable (Herbert): restore the insecure_elasticity toggle and
bounce the deferred-resize kick through irq_work to break a
lock-order cycle observable from raw-spinlock callers. sched_ext's
scheduler-instance hash is the first user of both.
- The bypass-mode load balancer used file-scope cpumasks; with
multiple scheduler instances now possible, those raced. Move to
per-instance cpumasks, plus a follow-up to skip tasks whose
recorded CPU is stale relative to the new owning runqueue.
- Smaller fixes:
- a dispatch queue's first-task tracking misbehaved when a parked
iterator cursor sat in the list
- the runqueue's next-class wasn't promoted on local-queue
enqueue, leaving an SCX task behind RT in edge cases
- the reference qmap scheduler stopped erroring on legitimate
cross-scheduler task-storage misses"
* tag 'sched_ext-for-7.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (26 commits)
sched_ext: Fix scx_flush_disable_work() UAF race
sched_ext: Call wakeup_preempt() in local_dsq_post_enq()
sched_ext: Release cpus_read_lock on scx_link_sched() failure in root enable
sched_ext: Reject NULL-sch callers in scx_bpf_task_set_slice/dsq_vtime
sched_ext: Refuse cross-task select_cpu_from_kfunc calls
sched_ext: Align cgroup #ifdef guards with SUB_SCHED vs GROUP_SCHED
sched_ext: Make bypass LB cpumasks per-scheduler
sched_ext: Pass held rq to SCX_CALL_OP() for core_sched_before
sched_ext: Pass held rq to SCX_CALL_OP() for dump_cpu/dump_task
sched_ext: Save and restore scx_locked_rq across SCX_CALL_OP
sched_ext: Use dsq->first_task instead of list_empty() in dispatch_enqueue() FIFO-tail
sched_ext: Resolve caller's scheduler in scx_bpf_destroy_dsq() / scx_bpf_dsq_nr_queued()
sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters
sched_ext: Don't disable tasks in scx_sub_enable_workfn() abort path
sched_ext: Skip tasks with stale task_rq in bypass_lb_cpu()
sched_ext: Guard scx_dsq_move() against NULL kit->dsq after failed iter_new
sched_ext: Unregister sub_kset on scheduler disable
sched_ext: Defer scx_hardlockup() out of NMI
sched_ext: sync disable_irq_work in bpf_scx_unreg()
sched_ext: Fix local_dsq_post_enq() to use task's scheduler in sub-sched
...
Add a regression test for the NULL pointer dereference fixed in the
previous commit. Before the fix, taprio_graft() stored NULL into
q->qdiscs[cl - 1] when an explicitly grafted child qdisc was deleted
via RTM_DELQDISC; the next RTM_GETTCLASS dump then crashed the kernel
in taprio_dump_class() while reading child->handle.
The test installs a taprio root qdisc on a multi-queue netdevsim
device, grafts a pfifo child onto class 8001:1, deletes that child,
and then performs a class dump. On a fixed kernel the dump succeeds
and all eight taprio classes are listed; on an unpatched kernel the
class dump crashes, which surfaces as a test failure.
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260422161958.2517539-4-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Renames types across all KVM selftests to more closely align with types used
in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
Using the kernel's preferred types eliminates a source of friction for many
contributors, as the majority of KVM selftests contributions come from kernel
developers. The kernel names are also shorter, which allows for more concise
code, and in any many cases eliminates newlines thanks to shorter types and
parameter names.
Rename variables and parameters as well as types, e.g. gpa instead of paddr,
to again align with the kernel, and in a few cases to remove ambiguity, e.g.
where paddr is used to refer to a _host_ physical address.
-----BEGIN PGP SIGNATURE-----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=nYWK
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests_kernel_types-7.1' of https://github.com/kvm-x86/linux into HEAD
KVM selftests type renames for 7.1
Renames types across all KVM selftests to more closely align with types used
in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
Using the kernel's preferred types eliminates a source of friction for many
contributors, as the majority of KVM selftests contributions come from kernel
developers. The kernel names are also shorter, which allows for more concise
code, and in any many cases eliminates newlines thanks to shorter types and
parameter names.
Rename variables and parameters as well as types, e.g. gpa instead of paddr,
to again align with the kernel, and in a few cases to remove ambiguity, e.g.
where paddr is used to refer to a _host_ physical address.
Define check_steal_time_uapi() for LoongArch so that the steal_time test
builds. Note, while LoongArch's steal_time_init() has some funky asserts,
none of the code is uniquely verifying KVM's uAPI.
Cc: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Cc: Jiakai Xu <jiakaiPeanut@gmail.com>
Cc: Andrew Jones <andrew.jones@oss.qualcomm.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Huacai Chen <chenhuacai@kernel.org>
Fixes: 40351ed924 ("KVM: selftests: Refactor UAPI tests into dedicated function")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260420192644.3892050-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
-----BEGIN PGP SIGNATURE-----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=0AP+
-----END PGP SIGNATURE-----
Merge tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Series for zloop, fixing a variety of issues
- t10-pi code cleanup
- Fix for a merge window regression with the bio memory allocation mask
- Fix for a merge window regression in ublk, caused by an issue with
the maple tree iteration code at teardown
- ublk self tests additions
- Zoned device pgmap fixes
- Various little cleanups and fixes
* tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (21 commits)
Revert "floppy: fix reference leak on platform_device_register() failure"
ublk: avoid unpinning pages under maple tree spinlock
ublk: refactor common helper ublk_shmem_remove_ranges()
ublk: fix maple tree lockdep warning in ublk_buf_cleanup
selftests: ublk: add ublk auto integrity test
selftests: ublk: enable test_integrity_02.sh on fio 3.42
selftests: ublk: remove unused argument to _cleanup
block: only restrict bio allocation gfp mask asked to block
block/blk-throttle: Add WQ_PERCPU to alloc_workqueue users
block: Add WQ_PERCPU to alloc_workqueue users
block: relax pgmap check in bio_add_page for compatible zone device pages
block: add pgmap check to biovec_phys_mergeable
floppy: fix reference leak on platform_device_register() failure
ublk: use unchecked copy helpers for bio page data
t10-pi: reduce ref tag code duplication
zloop: remove irq-safe locking
zloop: factor out zloop_mark_{full,empty} helpers
zloop: set RQF_QUIET when completing requests on deleted devices
zloop: improve the unaligned write pointer warning
zloop: use vfs_truncate
...
- Add Kunit correctness testing and microbenchmarks for strlen(),
strnlen(), and strrchr()
- Add RISC-V-specific strnlen(), strchr(), strrchr() implementations
- Add hardware error exception handling
- Clean up and optimize our unaligned access probe code
- Enable HAVE_IOREMAP_PROT to be able to use generic_access_phys()
- Remove XIP kernel support
- Warn when addresses outside the vmemmap range are passed to
vmemmap_populate()
- Update the ACPI FADT revision check to warn if it's not at least
ACPI v6.6, which is when key RISC-V-specific tables were added to the
specification
- Increase COMMAND_LINE_SIZE to 2048 to match ARM64, x86, PowerPC, etc.
- Make kaslr_offset() a static inline function, since there's no need
for it to show up in the symbol table
- Add KASLR offset and SATP to the VMCOREINFO ELF notes to improve
kdump support
- Add Makefile cleanup rule for vdso_cfi copied source files, and add
a .gitignore for the build artifacts in that directory
- Remove some redundant ifdefs that check Kconfig macros
- Add missing SPDX license tag to the CFI selftest
- Simplify UTS_MACHINE assignment in the RISC-V Makefile
- Clarify some unclear comments and remove some superfluous comments
- Fix various English typos across the RISC-V codebase
-----BEGIN PGP SIGNATURE-----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=hG4G
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"There is one significant change outside arch/riscv in this pull
request: the addition of a set of KUnit tests for strlen(), strnlen(),
and strrchr().
Otherwise, the most notable changes are to add some RISC-V-specific
string function implementations, to remove XIP kernel support, to add
hardware error exception handling, and to optimize our runtime
unaligned access speed testing.
A few comments on the motivation for removing XIP support. It's been
broken in the RISC-V kernel for months. The code is not easy to
maintain. Furthermore, for XIP support to truly be useful for RISC-V,
we think that compile-time feature switches would need to be added for
many of the RISC-V ISA features and microarchitectural properties that
are currently implemented with runtime patching. No one has stepped
forward to take responsibility for that work, so many of us think it's
best to remove it until clear use cases and champions emerge.
Summary:
- Add Kunit correctness testing and microbenchmarks for strlen(),
strnlen(), and strrchr()
- Add RISC-V-specific strnlen(), strchr(), strrchr() implementations
- Add hardware error exception handling
- Clean up and optimize our unaligned access probe code
- Enable HAVE_IOREMAP_PROT to be able to use generic_access_phys()
- Remove XIP kernel support
- Warn when addresses outside the vmemmap range are passed to
vmemmap_populate()
- Update the ACPI FADT revision check to warn if it's not at least
ACPI v6.6, which is when key RISC-V-specific tables were added to
the specification
- Increase COMMAND_LINE_SIZE to 2048 to match ARM64, x86, PowerPC,
etc.
- Make kaslr_offset() a static inline function, since there's no need
for it to show up in the symbol table
- Add KASLR offset and SATP to the VMCOREINFO ELF notes to improve
kdump support
- Add Makefile cleanup rule for vdso_cfi copied source files, and add
a .gitignore for the build artifacts in that directory
- Remove some redundant ifdefs that check Kconfig macros
- Add missing SPDX license tag to the CFI selftest
- Simplify UTS_MACHINE assignment in the RISC-V Makefile
- Clarify some unclear comments and remove some superfluous comments
- Fix various English typos across the RISC-V codebase"
* tag 'riscv-for-linus-7.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
riscv: Remove support for XIP kernel
riscv: Reuse compare_unaligned_access() in check_vector_unaligned_access()
riscv: Split out compare_unaligned_access()
riscv: Reuse measure_cycles() in check_vector_unaligned_access()
riscv: Split out measure_cycles() for reuse
riscv: Clean up & optimize unaligned scalar access probe
riscv: lib: add strrchr() implementation
riscv: lib: add strchr() implementation
riscv: lib: add strnlen() implementation
lib/string_kunit: extend benchmarks to strnlen() and chr searches
lib/string_kunit: add performance benchmark for strlen()
lib/string_kunit: add correctness test for strrchr()
lib/string_kunit: add correctness test for strnlen()
lib/string_kunit: add correctness test for strlen()
riscv: vdso_cfi: Add .gitignore for build artifacts
riscv: vdso_cfi: Add clean rule for copied sources
riscv: enable HAVE_IOREMAP_PROT
riscv: mm: WARN_ON() for bad addresses in vmemmap_populate()
riscv: acpi: update FADT revision check to 6.6
riscv: add hardware error trap handler support
...
1, Adjust build infrastructure for 32BIT/64BIT;
2, Add HIGHMEM (PKMAP and FIX_KMAP) support;
3, Show and handle CPU vulnerabilites correctly;
4, Batch the icache maintenance for jump_label;
5, Add more atomic instructions support for BPF JIT;
6, Add more features (e.g. fsession) support for BPF trampoline;
7, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=FiFl
-----END PGP SIGNATURE-----
Merge tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
Steady stream of fixes. Last two weeks feel comparable to the two
weeks before the merge window. Lots of AI-aided bug discovery.
A newer big source is Sashiko/Gemini (Roman Gushchin's system),
which points out issues in existing code during patch review
(maybe 25% of fixes here likely originating from Sashiko).
Nice thing is these are often fixed by the respective maintainers,
not drive-bys.
Current release - new code bugs:
- kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
Previous releases - regressions:
- add async ndo_set_rx_mode and switch drivers which we promised
to be called under the per-netdev mutex to it
- dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
- hv_sock: report EOF instead of -EIO for FIN
- vsock/virtio: fix MSG_PEEK calculation on bytes to copy
Previous releases - always broken:
- ipv6: fix possible UAF in icmpv6_rcv()
- icmp: validate reply type before using icmp_pointers
- af_unix: drop all SCM attributes for SOCKMAP
- netfilter: fix a number of bugs in the osf (OS fingerprinting)
- eth: intel: fix timestamp interrupt configuration for E825C
Misc:
- bunch of data-race annotations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=knNy
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Steady stream of fixes. Last two weeks feel comparable to the two
weeks before the merge window. Lots of AI-aided bug discovery. A newer
big source is Sashiko/Gemini (Roman Gushchin's system), which points
out issues in existing code during patch review (maybe 25% of fixes
here likely originating from Sashiko). Nice thing is these are often
fixed by the respective maintainers, not drive-bys.
Current release - new code bugs:
- kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
Previous releases - regressions:
- add async ndo_set_rx_mode and switch drivers which we promised to
be called under the per-netdev mutex to it
- dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
- hv_sock: report EOF instead of -EIO for FIN
- vsock/virtio: fix MSG_PEEK calculation on bytes to copy
Previous releases - always broken:
- ipv6: fix possible UAF in icmpv6_rcv()
- icmp: validate reply type before using icmp_pointers
- af_unix: drop all SCM attributes for SOCKMAP
- netfilter: fix a number of bugs in the osf (OS fingerprinting)
- eth: intel: fix timestamp interrupt configuration for E825C
Misc:
- bunch of data-race annotations"
* tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (148 commits)
rxrpc: Fix error handling in rxgk_extract_token()
rxrpc: Fix re-decryption of RESPONSE packets
rxrpc: Fix rxrpc_input_call_event() to only unshare DATA packets
rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
rxgk: Fix potential integer overflow in length check
rxrpc: Fix conn-level packet handling to unshare RESPONSE packets
rxrpc: Fix potential UAF after skb_unshare() failure
rxrpc: Fix rxkad crypto unalignment handling
rxrpc: Fix memory leaks in rxkad_verify_response()
net: rds: fix MR cleanup on copy error
m68k: mvme147: Make me the maintainer
net: txgbe: fix firmware version check
selftests/bpf: check epoll readiness during reuseport migration
tcp: call sk_data_ready() after listener migration
vhost_net: fix sleeping with preempt-disabled in vhost_net_busy_poll()
ipv6: Cap TLV scan in ip6_tnl_parse_tlv_enc_lim
tipc: fix double-free in tipc_buf_append()
llc: Return -EINPROGRESS from llc_ui_connect()
ipv4: icmp: validate reply type before using icmp_pointers
selftests/net: packetdrill: cover RFC 5961 5.2 challenge ACK on both edges
...
Inside migrate_dance(), add epoll checks around shutdown() to
verify that the target listener is not ready before shutdown()
and becomes ready immediately after shutdown() triggers migration.
Cover TCP_ESTABLISHED and TCP_SYN_RECV. Exclude TCP_NEW_SYN_RECV
as it depends on later handshake completion.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Link: https://patch.msgid.link/20260422024554.130346-3-jt26wzz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 5961 Section 5.2 / RFC 793 Section 3.9 require a challenge ACK
whenever an incoming SEG.ACK falls outside
[SND.UNA - MAX.SND.WND, SND.NXT]. There is currently no packetdrill
coverage for either edge.
Add tcp_rfc5961_ack-out-of-window.pkt, which in a single passive-open
connection exercises:
- Upper edge (SEG.ACK > SND.NXT): peer ACKs data that was never
sent before the server has transmitted anything.
- Lower edge (SEG.ACK < SND.UNA - MAX.SND.WND): after the server
has sent 2000 bytes (the peer-advertised rwnd forces two 1000-byte
segments, both acknowledged), peer sends an ACK that is older
than the acceptable window.
Both cases must elicit a challenge ACK
<SEQ = SND.NXT, ACK = RCV.NXT, CTL = ACK>. The per-socket RFC 5961
Section 7 rate limit is disabled for the duration of the test so that
both challenge ACKs can fire back-to-back.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 5961 Section 5.2 validates an incoming segment's ACK value
against the range [SND.UNA - MAX.SND.WND, SND.NXT] and states:
"All incoming segments whose ACK value doesn't satisfy the above
condition MUST be discarded and an ACK sent back."
Commit 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack
Mitigation") opted Linux into this mitigation and implements the
challenge ACK on the lower side (SEG.ACK < SND.UNA - MAX.SND.WND),
but the symmetric upper side (SEG.ACK > SND.NXT) still takes the
pre-RFC-5961 path and silently returns
SKB_DROP_REASON_TCP_ACK_UNSENT_DATA, even though RFC 793 Section 3.9
(now RFC 9293 Section 3.10.7.4) has always required:
"If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT)
then send an ACK, drop the segment, and return."
Complete the mitigation by sending a challenge ACK on that branch,
reusing the existing tcp_send_challenge_ack() path which already
enforces the per-socket RFC 5961 Section 7 rate limit via
__tcp_oow_rate_limited(). FLAG_NO_CHALLENGE_ACK is honoured for
symmetry with the lower-edge case.
Update the existing tcp_ts_recent_invalid_ack.pkt selftest, which
drives this exact path, to consume the new challenge ACK.
Fixes: 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new chk_sndbuf() helper to diag.sh that extracts the sndbuf
(the 'tb' field from 'ss -m' skmem output) for both server and
client MPTCP sockets, and verifies they are equal.
Without the previous patch, it will fail:
'''
07 ....chk sndbuf server/client [FAIL] sndbuf S=20480 != C=2630656
'''
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260420-net-mptcp-sync-sndbuf-accept-v1-2-e3523e3aeb44@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The end-to-end integrity ublk selftest test_integrity_02 requires a
relatively recent fio version to support I/O with integrity buffers. Add
a version test_integrity_03 that uses the block layer's auto integrity
path instead. The auto integrity code doesn't check the application tag,
and doesn't indicate the bad guard/ref tag (just returns EILSEQ). But
it's a good smoke-test of the ublk integrity code and provides coverage
of the auto integrity path as well.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fio 3.42 was released with the needed fix for test_integrity_02.sh.
Allow 3.42 and newer in the fio version check.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The _cleanup helper function doesn't take any arguments, so drop them
from its callers.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to do the following load-acquire and store-release tests on
LoongArch:
sudo ./test_progs -t verifier_load_acquire
sudo ./test_progs -t verifier_store_release
sudo ./test_progs -t verifier_precision/bpf_load_acquire
sudo ./test_progs -t verifier_precision/bpf_store_release
sudo ./test_progs -t compute_live_registers/atomic_load_acq_store_rel
It needs to enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
- Fix month in date timestamp used to create failure directories
On failure, a directory is created to store the logs and config file to
analyze the failure. The Perl function localtime is used to create the
data timestamp of the directory. The month passed back from that
function starts at 0 and not 1, but the timestamp used does not account
for that. Thus for April 20, 2026, the timestamp of 20260320 is used,
instead of 20260420.
- Save the logfile to the failure directory
Just the test log is saved to the directory on failure, but there's
useful information in the full logfile that can be helpful to analyzing
the failure. Save the logfile as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaeknTxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qm9hAP9jPNvXaCqvcGfz9QN2fEOs7sWWVOAQ
gryZ8Nyqn4CmswD/aQkYBVRSeWsvUrbw7WYrFvEOH0hUfKD6CaFLaA6EigE=
=ONM2
-----END PGP SIGNATURE-----
Merge tag 'ktest-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix month in date timestamp used to create failure directories
On failure, a directory is created to store the logs and config file
to analyze the failure. The Perl function localtime is used to create
the data timestamp of the directory. The month passed back from that
function starts at 0 and not 1, but the timestamp used does not
account for that. Thus for April 20, 2026, the timestamp of 20260320
is used, instead of 20260420.
- Save the logfile to the failure directory
Just the test log was saved to the directory on failure, but there's
useful information in the full logfile that can be helpful to
analyzing the failure. Save the logfile as well.
* tag 'ktest-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add logfile to failure directory
ktest: Fix the month in the name of the failure directory
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmnobFATHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXhafB/wMvf8yu4FgapbSRIlPboeW/ONDyuHd
k0y1a0IFMQLspWfCxK8+snEcHT3g9xzG3ksqcnac0SPgzqxQ4dlK/c7Xr+5EBXuf
TEt/bHrt6KT5BUpb1k/XxcdoObCsvZd3vfqR020OsHijw1Ni9PrdqeZxk56/vFJs
nvgyKvsrAEyfALOH1Vgwg0gNWpqJBj1KcT3Kl1o4p5lwQzVpUREZii6RyvgXT/pu
mckN63FrEPOpDaJllHmCPcfFSzqNi+wFQcFxm35w9rDQsVdnMsRWoJbcXNYW5QGM
+KOZ1/tzw4Z3queW78hcxsH6sXiElLDsJgtDohBhxbVvUXy+xHrJCOm5
=4Ke3
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Fix cross-compilation for hv tools (Aditya Garg)
- Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)
- Limit channel interrupt scan to relid high water mark (Michael
Kelley)
- Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)
- Fix cleanup and shutdown issues for MSHV (Jork Loeser)
- Introduce more tracing support for MSHV (Stanislav Kinsburskii)
* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Skip LP/VP creation on kexec
x86/hyperv: move stimer cleanup to hv_machine_shutdown()
Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
mshv: Add tracepoint for GPA intercept handling
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
tools: hv: Fix cross-compilation
Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
mshv: Introduce tracing support
Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
Since v2026.02.14
Display HT siblings in cpu# order.
Add Module-ID column.
Print Core-ID and APIC-ID in hex.
Fix misc bugs.
Signed-off-by: Len Brown <len.brown@intel.com>
On large systems with HT sibling cpu#'s more than 32 apart,
HT siblings were processed and displayed in reverse order.
This was due to how set_thread_siblings() parsed the
sibling-bit-mask.
Update set_thread_siblings to instead parse the sibling-list,
like other cpu lists, and to thus order HT siblings
by ascending CPU number, no matter the size of the system.
Signed-off-by: Len Brown <len.brown@intel.com>
Get the "module_id" from the Linux topology "cluster_id".
If the there is more than one id, show it by default.
Module joins Die etc. in the "topology" group.
Display in hex, as it is usually based mask of the APIC-id
Signed-off-by: Len Brown <len.brown@intel.com>
The core_id is based on a mask of the apic_id.
Print them both in hex, rather than decimal,
to make this relationship visibly clear.
Signed-off-by: Len Brown <len.brown@intel.com>
Make printer helper functions more readable by factoring
out a local 'sep' variable.
Remove the redundant parentheses around sprintf() calls.
Remove an unnecessary cast to "unsigned int" by using the '%08llx' instead
of '%08x'.
No functional changes.
[lenb: fix typos, simplify]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When the "--cpu-set" option limits turbostat to run on
a higher numbered HT sibling, it exits upon dividing by zero.
This is because the HT support handles higher numbered siblings
at the same time as lower numbered siblings. But when that lower
number sibling is dis-allowed, the higher numbered sibling is
never processed. The result is a time delta of 0, which results
in a divide by 0 for any of the "per-second" metrics.
Enhance the HT enumeration code to record all siblings (up to SMT4).
Consult this complete HT sibling list to determine when
to process an HT sibling, and when to skip it.
Fixes: a2b4d0f8bf ("tools/power turbostat: Favor cpu# over core#")
Signed-off-by: Len Brown <len.brown@intel.com>
