Add a driver to support the individual SDCA functions within the class
driver. Use the SDCA helpers to parse the DisCo information and register
a function driver based on those properties. Manage the boot of the
function, reset, FDL, defaults. Manage the function level register map.
Co-developed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-14-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a device level driver as the entry point for the class driver.
Additional auxiliary drivers will be registered to support each function
within the device. This driver will register those function drivers and
provide the device level functionality, such as monitoring bus
attach/detach, the device level register map, and the root for the IRQ
handling.
Co-developed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-13-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the auxiliary bus to register/unregister subdevices for each
function. Each function will be handled with a separate driver,
matched using a name.
If a vendor wants to override a specific function driver, they could
use a custom name to match with a custom function driver.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-12-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to write out the SDCA blind initialization writes.
Acked-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-11-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not uncommon for an SDCA Control to have no specified default
value in the DisCo. Non-volatile registers with no defaults will not be
present in the cache until they are accessed. However, if the first
operation user-space performs is a read whilst the device is runtime
suspended this read will fail.
To avoid such problems we should populate values from the hardware into
the cache for all non-volatile readable registers with no defaults.
Update the defaults handling to do this cache population since it is
iterating over the Controls and happens at a time the hardware is
always powered up.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-10-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The indentation of the loop processing writing out SDCA Control default
values is getting a bit large. Reduce indentation and make adding more
functionality easier by factoring out the Control handling into a helper
function.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-9-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
We have the SDCA_CTL_TYPE helper macros, we should use them when
identifying specific controls to simplify the code a little.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-8-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA code is very spammy on boot as it prints a lot of parsing
details using info prints. Now primary development is complete move
these to debug prints to reduce the spam.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-7-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a comment to better explain the function reset polling rate.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-6-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The current locking in sdca_fdl_process() locks over
sdca_ump_cancel_timeout() and the timeout work function takes the same
lock, this can lead to a deadlock if the work runs as part of the
cancel. To fix this use scoped_guard and move the cancel timeout to be
outside the lock.
Fixes: e92e25f777 ("ASoC: SDCA: Add UMP timeout handling for FDL")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-5-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The structure sdca_function_desc contains a fwnode_handle which is
undefined if the user doesn't pull in an appropriate header. Add a
forward declaration to avoid this.
Fixes: 996bf834d0 ("ASoC: SDCA: Add code to parse Function information")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-4-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The property name is "mipi-sdca-RxUMP-ownership-transition-max-delay",
with a dash between max and delay. Add the missing dash.
Fixes: 13ef21dffe ("ASoC: SDCA: add support for HIDE entity properties and HID descriptor/report")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-3-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Both HID and the IRQ are now build into the wider SDCA kernel module, so
their module macros are redundant, remove them.
Fixes: 5030abcb0a ("ASoC: SDCA: Pull HID and IRQ into the primary SDCA module")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-2-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible entry in spidev describing in Arduino UnoQ single-board
computer the interface between Qualcomm QRB2210 microprocessor and
STMicroelectronics STM32U585 microcontroller.
It is handled in user space by the arduino-router service.
Signed-off-by: Riccardo Mereu <r.mereu@arduino.cc>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251120155825.121483-4-r.mereu.kernel@arduino.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Add unoq mcu interface. It describes an iterface between Qualcomm
QRB2210 microprocessor and STMicroelectronics STM32U585 microcontroller
on Arduino UnoQ single-board computer.
This is a trivial device since it's usage is handled in user space
by the arduino-router service.
Signed-off-by: Riccardo Mereu <r.mereu@arduino.cc>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251120155825.121483-3-r.mereu.kernel@arduino.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the compatible for ANV32C81W 256kb Serial SPI non-volatile SRAM.
Although it is a SRAM device, it can be accessed through EEPROM interface.
At least until there is no proper SRAM driver support for it.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20251118121513.88352-1-marex@nabladev.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346 ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This phy supports both 24MHz and 100MHz clock inputs. By default it's
using XTAL 24MHz and the 100MHz clock is a alternate reference clock.
Add supports to use alternate reference clock in case 24MHz clock
can't work well.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20251118071947.2504789-2-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Beside default 24MHz clock input, there is an optional additional 100Mhz
clock input 'alt' for USB PHY reference clock.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20251118071947.2504789-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When cross-compilation is not used, BPFOBJ and HOST_BPFOBJ are identical
files, libbpf.a, and duplicate libbpf.a files should be removed.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixup PHY deskew FIFO to prevent the phase of D2 lane going ahead of
other lanes. It's worth noting this might only happen when dealing with
HDMI 2.0 rates.
Fixes: 553be2830c ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-3-ecc642a59d94@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Due to its relatively low frequency, a noise stemming from the 24MHz PLL
reference clock may traverse the low-pass loop filter of ROPLL, which
could potentially generate some HDMI flash artifacts.
Reduce ROPLL loop bandwidth in an attempt to mitigate the problem.
Fixes: 553be2830c ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-2-ecc642a59d94@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When making use of the clock provider functionality, the output clock
does normally match the TMDS character rate, which is what the PHY PLL
gets configured to.
However, this is only applicable for default color depth of 8 bpc. For
higher depths, the output clock is further divided by the hardware
according to the formula:
output_clock_rate = tmds_char_rate * 8 / bpc
Since the existence of the clock divider wasn't taken into account when
support for high bpc has been introduced, make the necessary adjustments
to report the correct clock rate.
Fixes: 9d0ec51d7c ("phy: rockchip: samsung-hdptx: Add high color depth management")
Reported-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-1-ecc642a59d94@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
*** Bug description ***
When testing kexec-reboot on a 144 cpus machine with
isolcpus=managed_irq,domain,1-71,73-143 in kernel command line, I
encounter the following bug:
[ 97.114759] psci: CPU142 killed (polled 0 ms)
[ 97.333236] Failed to offline CPU143 - error=-16
[ 97.333246] ------------[ cut here ]------------
[ 97.342682] kernel BUG at kernel/cpu.c:1569!
[ 97.347049] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[...]
In essence, the issue originates from the CPU hot-removal process, not
limited to kexec. It can be reproduced by writing a SCHED_DEADLINE
program that waits indefinitely on a semaphore, spawning multiple
instances to ensure some run on CPU 72, and then offlining CPUs 1–143
one by one. When attempting this, CPU 143 failed to go offline.
bash -c 'taskset -cp 0 $$ && for i in {1..143}; do echo 0 > /sys/devices/system/cpu/cpu$i/online 2>/dev/null; done'
Tracking down this issue, I found that dl_bw_deactivate() returned
-EBUSY, which caused sched_cpu_deactivate() to fail on the last CPU.
But that is not the fact, and contributed by the following factors:
When a CPU is inactive, cpu_rq()->rd is set to def_root_domain. For an
blocked-state deadline task (in this case, "cppc_fie"), it was not
migrated to CPU0, and its task_rq() information is stale. So its rq->rd
points to def_root_domain instead of the one shared with CPU0. As a
result, its bandwidth is wrongly accounted into a wrong root domain
during domain rebuild.
*** Issue ***
The key point is that root_domain is only tracked through active rq->rd.
To avoid using a global data structure to track all root_domains in the
system, there should be a method to locate an active CPU within the
corresponding root_domain.
*** Solution ***
To locate the active cpu, the following rules for deadline
sub-system is useful
-1.any cpu belongs to a unique root domain at a given time
-2.DL bandwidth checker ensures that the root domain has active cpus.
Now, let's examine the blocked-state task P.
If P is attached to a cpuset that is a partition root, it is
straightforward to find an active CPU.
If P is attached to a cpuset that has changed from 'root' to 'member',
the active CPUs are grouped into the parent root domain. Naturally, the
CPUs' capacity and reserved DL bandwidth are taken into account in the
ancestor root domain. (In practice, it may be unsafe to attach P to an
arbitrary root domain, since that domain may lack sufficient DL
bandwidth for P.) Again, it is straightforward to find an active CPU in
the ancestor root domain.
This patch groups CPUs into isolated and housekeeping sets. For the
housekeeping group, it walks up the cpuset hierarchy to find active CPUs
in P's root domain and retrieves the valid rd from cpu_rq(cpu)->rd.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Chen Ridong <chenridong@huaweicloud.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
To: linux-kernel@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
cpuset_cpus_allowed() uses a reader lock that is sleepable under RT,
which means it cannot be called inside raw_spin_lock_t context.
Introduce a new cpuset_cpus_allowed_locked() helper that performs the
same function as cpuset_cpus_allowed() except that the caller must have
acquired the cpuset_mutex so that no further locking will be needed.
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: linux-kernel@vger.kernel.org
To: cgroups@vger.kernel.org
Reviewed-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The "phy_id" comes from the device tree so it's going to be correct.
But static checkers sometimes complain when we have an upper bounds
check with no lower bounds check. Also it's a bit unusual that the
lowest valid number is 1 instead of 0 so adding a check could
potentially help someone.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/aPJpB-QI8FMpFGOk@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=89Xl
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures"
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
The new Glymur SoC bumps up the HW version of QMP phy to v8.50 for PCIE
g5x4. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103-glymur-pcie-upstream-v6-2-18a5e0a538dc@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The fifth PCIe instance on Glymur has a Gen5 4-lane PHY. Document it as a
separate compatible.
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103-glymur-pcie-upstream-v6-1-18a5e0a538dc@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Bindings should be complete, thus complete the constraints for the
resets by adding missing compatibles for devices with two resets and
"else:" clause narrowing them for all other devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251017045919.34599-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Certain platforms may not have the PHY_ENABLE bit set on power on reset.
Update the current sequence to explicitly write to enable the PHY_ENABLE
bit. This ensures that regardless of the platform, the PHY is properly
enabled.
Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250920032158.242725-1-wesley.cheng@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The QMP USB3/DP Combo PHY hosts an USB3 phy and a DP PHY on top
of a combo glue to route either lanes to the 4 shared physical lanes.
The routing of the lanes can be:
- 2 DP + 2 USB3
- 4 DP
- 2 USB3
Get the lanes mapping from DT and stop registering the USB-C
muxes in favor of a static mode and orientation detemined
by the lanes mapping.
This allows supporting boards with direct connection of USB3 and
DisplayPort lanes to the QMP Combo PHY lanes, not using the
USB-C Altmode feature.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Xilin Wu <sophon@radxa.com> # qcs6490-radxa-dragon-q6a
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-topic-x1e80100-hdmi-v7-2-2bee0e66cc1b@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The QMP USB3/DP Combo PHY hosts an USB3 phy and a DP PHY on top
of a combo glue to route either lanes to the 4 shared physical lanes.
The routing of the lanes can be:
- 2 DP + 2 USB3
- 4 DP
- 2 USB3
The layout of the lanes was designed to be mapped and swapped
related to the USB-C Power Delivery negociation, so it supports
a finite set of mappings inherited by the USB-C Altmode layouts.
Nevertheless those QMP Comby PHY can be used to drive a DisplayPort
connector, DP->HDMI bridge, USB3 A Connector, etc... without
an USB-C connector and no PD events.
Document the data-lanes on numbered port@0 out endpoints,
allowing us to document the lanes mapping to DisplayPort
and/or USB3 connectors/peripherals.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-topic-x1e80100-hdmi-v7-1-2bee0e66cc1b@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When PCIe link enters L1 PM substates, the PHY will turn off its
PLL for power-saving. However, it turns off the PLL too fast which
leads the PHY to be broken. According to the PHY document, we need
to delay PLL turnoff time.
Fixes: f13bff2516 ("phy: rockchip-naneng-combo: Support rk3562")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/1763459526-35004-2-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When PCIe link enters L1 PM substates, the PHY will turn off its
PLL for power-saving. However, it turns off the PLL too fast which
leads the PHY to be broken. According to the PHY document, we need
to delay PLL turnoff time.
Fixes: bbcca4fac8 ("phy: rockchip: naneng-combphy: Add RK3528 support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/1763459526-35004-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Renesas RZ/G3S supports a power saving mode where power to most of the
SoC components is turned off. The USB PHY is among these components.
Because of this the settings applied in driver probe need to be executed
also on resume path. On suspend path only reset signal need to be asserted.
Add suspend/resume support.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119120418.686224-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Move the check of phy_data->init_bus from rcar_gen3_phy_usb2_init_bus()
to rcar_gen3_phy_usb2_probe() to avoid having it duplicated in both the
probe path and the upcoming resume code. This is a preparatory patch.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119120418.686224-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If an error occurs after the reset_control_deassert(),
reset_control_assert() must be called, as already done in the remove
function.
Use devm_add_action_or_reset() to add the missing call and simplify the
.remove() function accordingly.
While at it, drop struct rcar_gen3_chan::rstc as it is not used aymore.
[claudiu.beznea: removed "struct reset_control *rstc = data;" from
rcar_gen3_reset_assert(), dropped struct rcar_gen3_chan::rstc]
Fixes: 4eae163753 ("phy: renesas: rcar-gen3-usb2: Add support to initialize the bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251023135810.1688415-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The reset lines are mandatory for the Renesas RZ/G3S platform and must be
explicitly defined in device tree.
Fixes: f3c8498551 ("dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251023135810.1688415-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit f4fb9c4d7f ("phy: exynos5-usbdrd: allow DWC3 runtime suspend
with UDC bound (E850+)") incorrectly added clk_bulk_disable() as the
inverse of clk_bulk_prepare_enable() while it should have of course
used clk_bulk_disable_unprepare(). This means incorrect reference
counts to the CMU driver remain.
Update the code accordingly.
Fixes: f4fb9c4d7f ("phy: exynos5-usbdrd: allow DWC3 runtime suspend with UDC bound (E850+)")
CC: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20251006-gs101-usb-phy-clk-imbalance-v1-1-205b206126cf@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These two patches improve the implementation of the debugfs files for
the wmfw and bin file names. First patch removes duplicated code. Second
patch replaces the old clunkiness of storing the filename with an appended
\n. The \n can be appended when the file is read, to keep the stored string
sane.
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function and match table must not live in init.
Fixes: 783f6d3dcf ("phy: bcm63xx-usbh: Add BCM63xx USBH driver")
Cc: stable@vger.kernel.org # 5.9
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251017054537.6884-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For MIPI mode, the inno-dsidphy found on RK3506 supports up to 2 lanes
and a maximum data rate of 1.5GHz.
Signed-off-by: Hongming Zou <hongming.zou@rock-chips.com>
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251106020632.92-7-kernel@airkyi.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a driver for the FP9931/JD9930 regulator. Implement handling of the PG
(power good), TS_EN (temperature sensor enable), and EN (enable regulators)
pins. Implement the pair of symmetric LDOs as a single regulator because
they share a single voltage set register. For simplicity, just add the
temperature sensor (depending on external NTC) directly.
Limitations:
- As these regulators are controlled together with the VCOM regulator via
the EN pin, some kind of management must be in place. As the enable op
is not called when the regulator is already enabled, simple refcounting
seems not to work to avoid clearing EN when one regulator is still
enabled. As these regulators are typically used together, this
limitation should not hurt hard, just provide the is_enabled op.
- As the VCOM step is quite odd (5V/255 steps), rounding is needed.
Due to some limitations in the regulator core, the max/min voltages in
the devicetree must match the idea of the driver how to round things
exactly.
- Night mode is not implemented, so only the FP9931 compatible is needed in
the driver, there is no REGULATOR_MODE_NIGHT and no clear definition in
the datasheet what it does, also the XON pin which seems to be an input
related to that night mode is not used.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-3-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the FP9931/JD9930. As the FP9931 is a clear subset of the JD9930,
define it as a fallback compatible. GPIO names are same as in the datasheet
except for the EN pad which is described as "enable".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-2-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
