The longindex argument of getopt_long() is optional
and tied to the unused local variable option_index.
Remove it to shorten the four longest functions
and make the code neater.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251002123553.389467-2-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
The rtla tools have many instances of iterating over CPUs while
checking if they are monitored.
Add a for_each_monitored_cpu() helper macro to make the code
more readable and reduce code duplication.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251002123553.389467-1-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Call scsi_device_put() in ata_scsi_dev_rescan() if the device or its
queue are not running.
Fixes: 0c76106cb9 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: stable@vger.kernel.org
Signed-off-by: Yihang Li <liyihang9@h-partners.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5p6s
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless-2025-11-20
A single fix for scanning on some rtw89 devices.
* tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: rtw89: hw_scan: Don't let the operating channel be last
====================
Link: https://patch.msgid.link/20251120085433.8601-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Getting module EEPROM has been supported in TXGBE SP devices, since SFP
driver has already implemented it.
Now add support to read module EEPROM for AML devices. Towards this, add
a new firmware mailbox command to get the page data.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-6-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For QSFP modules, there is a possibility that the module cannot be
identified when read I2C immediately in .ndo_open. So just set the flag
WX_FLAG_NEED_MODULE_RESET and do it in the subtask, which always wait
200 ms to identify the module. And this change has no impact on the
original adaptation.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-5-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Support to identify QSFP modules for AML 40G devices. The definition of
GPIO pins follows the design of the QSFP modules, and TXGBE_GPIOBIT_4 is
used for module present.
Meanwhile, implement phylink in XLGMII mode by default, and get the link
state from MAC link.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
QSFP supported will be introduced for AML 40G devices, the code related
to identify various modules should be renamed to more appropriate names.
And struct txgbe_hic_i2c_read used to get module information is renamed
as struct txgbe_hic_get_module_info, because another SW-FW command to
read I2C will be added later.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In xe_oa_add_config_ioctl(), we accessed oa_config->id after dropping
metrics_lock. Since this lock protects the lifetime of oa_config, an
attacker could guess the id and call xe_oa_remove_config_ioctl() with
perfect timing, freeing oa_config before we dereference it, leading to
a potential use-after-free.
Fix this by caching the id in a local variable while holding the lock.
v2: (Matt A)
- Dropped mutex_unlock(&oa->metrics_lock) ordering change from
xe_oa_remove_config_ioctl()
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6614
Fixes: cdf02fe1a9 ("drm/xe/oa/uapi: Add/remove OA config perf ops")
Cc: <stable@vger.kernel.org> # v6.11+
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251118114859.3379952-2-sanjay.kumar.yadav@intel.com
Use cpumask_weighted_or() instead of cpumask_or() and cpumask_weight() on
the result, which walks the same bitmap twice. Results in 10-20% less
cycles, which reduces the runqueue lock hold time.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Link: https://patch.msgid.link/20251119172549.511736272@linutronix.de
CID management OR's two cpumasks and then calculates the weight on the
result. That's inefficient as that has to walk the same stuff twice. As
this is done with runqueue lock held, there is a real benefit of speeding
this up. Depending on the system this results in 10-20% less cycles spent
with runqueue lock held for a 4K cpumask.
Provide cpumask_weighted_or() and the corresponding bitmap functions which
return the weight of the OR result right away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.448263340@linutronix.de
mm_update_cpus_allowed() is not required to be invoked for affinity changes
due to migrate_disable() and migrate_enable().
migrate_disable() restricts the task temporarily to a CPU on which the task
was already allowed to run, so nothing changes. migrate_enable() restores
the actual task affinity mask.
If that mask changed between migrate_disable() and migrate_enable() then
that change was already accounted for.
Move the invocation to the proper place to avoid that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.385208276@linutronix.de
This is only used in the scheduler core code, so there is no point to have
it in a global header.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Link: https://patch.msgid.link/20251119172549.321259077@linutronix.de
With whitespace checks enabled in the editor this makes eyes bleed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.258651925@linutronix.de
Both the per CPU storage and the data in mm_struct are heavily used in
context switch. As they can end up next to other frequently modified data,
they are subject to false sharing.
Make them cache line aligned.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.194111661@linutronix.de
Having a lot of CID functionality specific members in struct task_struct
and struct mm_struct is not really making the code easier to read.
Encapsulate the CID specific parts in data structures and keep them
separate from the stuff they are embedded in.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.131573768@linutronix.de
The CID management is a complex beast, which affects both scheduling and
task migration. The compaction mechanism forces random tasks of a process
into task work on exit to user space causing latency spikes.
Revert back to the initial simple bitmap allocating mechanics, which are
known to have scalability issues as that allows to gradually build up a
replacement functionality in a reviewable way.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.068197830@linutronix.de
Merge CMAC-128 and CMAC-256 handlers since they are almost the same.
This removes duplication.
The comment 'MIC = AES-128-CMAC(IGTK, AAD ...' is out-dated since CMAC
is also used with BIGTK, as is the comment for CMAC-256. Simply remove
the comments.
Tested-on: mac80211_hwsim
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251113140511.48658-6-m@xv97.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_aes_cmac() and ieee80211_aes_cmac_256() are almost the same.
Merge them. This removes duplication.
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251113140511.48658-5-m@xv97.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The added struct is needed when writing generic handler for both CMAC-128
and CMAC-256.
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251113140511.48658-3-m@xv97.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The called hash functions could fail thus we should check return values.
Fixes: 26717828b7 ("mac80211: aes-cmac: switch to shash CMAC driver")
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251113140511.48658-2-m@xv97.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen after a careful review and conversion of each individual
case, workqueue users must be converted to the better named new workqueues with
no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> systemd_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251120094524.45264-1-marco.crivellari@suse.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The L2TP stack did not reset the skb control buffer before sending the
encapsulated package.
In a setup with an ath10k radio and batman-adv over an L2TP tunnel
massive fragmentations happen sporadically if the L2TP tunnel is
established over IPv4.
L2TP might reset some of the fields in the IP control buffer, but L2TP
assumes the type of the control buffer to be of an IPv4 packet.
In case the L2TP interface is used as a batadv hardif or the packet is
an IPv6 packet, this assumption breaks.
Clear the entire control buffer to avoid such mishaps altogether.
Fixes: f77ae93904 ("[PPPOL2TP]: Reset meta-data in xmit function")
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://patch.msgid.link/20251118001619.242107-1-mail@david-bauer.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit d373449d8e ("iommu/vt-d: Use the generic iommu page table")
changed the calculation of domain::aperture_end. Previously, it was
calculated as:
domain->domain.geometry.aperture_end =
__DOMAIN_MAX_ADDR(domain->gaw - 1);
where domain->gaw was limited to less than MGAW.
Currently, it is calculated purely based on the max level of the page
table that the hardware supports. This is incorrect as stated in Section
3.6 of the VT-d spec:
"Software using first-stage translation structures to translate an IO
Virtual Address (IOVA) must use canonical addresses. Additionally,
software must limit addresses to less than the minimum of MGAW and the
lower canonical address width implied by FSPM (i.e., 47-bit when FSPM
is 4-level and 56-bit when FSPM is 5-level)."
Restore the previous calculation method for domain::aperture_end to avoid
violating the spec. Incorrect aperture calculation causes GPU hangs
without generating VT-d faults on some Intel client platforms.
Fixes: d373449d8e ("iommu/vt-d: Use the generic iommu page table")
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/r/4f15cf3b-6fad-4cd8-87e5-6d86c0082673@intel.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Invalidation hint (ih) in the function 'qi_desc_iotlb' is initialized
to zero and never used. It is embedded in the 0th bit of the 'addr'
parameter. Get the correct 'ih' value from there.
Fixes: f701c9f36b ("iommu/vt-d: Factor out invalidation descriptor composition")
Signed-off-by: Aashish Sharma <aashish@aashishsharma.net>
Link: https://lore.kernel.org/r/20251009010903.1323979-1-aashish@aashishsharma.net
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
INTEL_IOMMU_FLOPPY_WA workaround was introduced to create direct mappings
for first 16MB for floppy devices as the floppy drivers were not using
dma apis. We need not do this direct map if floppy driver is not
enabled.
INTEL_IOMMU_FLOPPY_WA is generally not a good idea. Iommu will be
mapping pages in this address range while kernel would also be
allocating from this range(mostly on memory stress). A misbehaving
device using this domain will have access to the pages that the
kernel might be actively using. We noticed this while running a test
that was trying to figure out if any pages used by kernel is in iommu
page tables.
This patch reduces the scope of the above issue by disabling the
workaround when floppy driver is not enabled. But we would still need to
fix the floppy driver to use dma apis so that we need not do direct map
without reserving the pages. Or the other option is to reserve this
memory range in firmware so that kernel will not use the pages.
Fixes: d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via iommu_get_resv_regions")
Fixes: 49a0429e53 ("Intel IOMMU: Iommu floppy workaround")
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Link: https://lore.kernel.org/r/20251002161625.1155133-1-vineeth@bitbyteword.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
On S2MPG10 (and similar like S2MPG11), top-level interrupt status and
mask registers exist which need to be unmasked to get the PMIC
interrupts. This additional status doesn't seem to exist on other PMICs
in the S2MP* family, and the S2MPG10 driver is manually dealing with
masking and unmasking currently.
The correct approach here is to register this hierarchy as chained
interrupts, though, without any additional manual steps. Doing so will
also simplify addition of other, similar, PMICs (like S2MPG11) in the
future.
Update the driver to do just that.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251114-s2mpg10-chained-irq-v1-1-34ddfa49c4cd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Correct RGMII delay application logic in lan937x_set_tune_adj().
The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the
new delay value. This caused the new value to be bitwise-OR'd with the
existing PORT_TUNE_ADJ field instead of replacing it.
For example, when setting the RGMII 2 TX delay on port 4, the
intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was
incorrectly OR'd with the default 0x1B (from register value 0xDA3),
leaving the delay at the wrong setting.
This patch adds the missing mask to clear the field, ensuring the
correct delay value is written. Physical measurements on the RGMII TX
lines confirm the fix, showing the delay changing from ~1ns (before
change) to ~2ns.
While testing on i.MX 8MP showed this was within the platform's timing
tolerance, it did not match the intended hardware-characterized value.
Fixes: b19ac41faa ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251114090951.4057261-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Further investigation revealed that the MCU in QNAP devices may return
two error states. One "@8" for a checksum error in the submitted command
and one "@9" for any generic (and sadly unspecified) error.
These error codes with 2 data character can of course also be shorter
then the expected reply length for the submitted command, so we'll
need to check the received data for error codes and exit the receive
portion early in that case.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251113165218.449616-5-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
We'll need the checksum check in a second place in the future, so
move the verification code to a separate function.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251113165218.449616-4-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
EPROTO stands for protocol error and a lot of driver already use it
to designate errors in the sent or received data from a peripheral.
So use it in the qnap-mcu as well for checksum errors.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251113165218.449616-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
In the case of an error message, the number of received bytes can be
less than originally expected but still contain a valid message.
If the transfer itself ended in an error we would exit earlier already.
So calculate the checksum on the number of received bytes and not the
number of expected bytes.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251113165218.449616-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
In older versions of Rust, the compiler doesn't know about the newer
`as_flattened*` methods, thus `rustdoc` complains about the intra-doc
links, e.g.
error: unresolved link to `slice::as_flattened`
--> rust/kernel/slice.rs:19:23
|
19 | /// [`as_flattened`]: slice::as_flattened
| ^^^^^^^^^^^^^^^^^^^ the primitive type `slice` has no associated item named `as_flattened`
|
= note: `-D rustdoc::broken-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::broken_intra_doc_links)]`
Thus fix them by using an URL instead.
Fixes: 88622323dd ("rust: enable slice_flatten feature and provide it through an extension trait")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251119185125.1411151-1-ojeda@kernel.org
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
xfs/286 produced this report on my test fleet:
==================================================================
BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110
Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184):
memcpy_orig+0x54/0x110
xrep_symlink_salvage_inline+0xb3/0xf0 [xfs]
xrep_symlink_salvage+0x100/0x110 [xfs]
xrep_symlink+0x2e/0x80 [xfs]
xrep_attempt+0x61/0x1f0 [xfs]
xfs_scrub_metadata+0x34f/0x5c0 [xfs]
xfs_ioc_scrubv_metadata+0x387/0x560 [xfs]
xfs_file_ioctl+0xe23/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128
allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago):
xfs_init_local_fork+0x79/0xe0 [xfs]
xfs_iformat_local+0xa4/0x170 [xfs]
xfs_iformat_data_fork+0x148/0x180 [xfs]
xfs_inode_from_disk+0x2cd/0x480 [xfs]
xfs_iget+0x450/0xd60 [xfs]
xfs_bulkstat_one_int+0x6b/0x510 [xfs]
xfs_bulkstat_iwalk+0x1e/0x30 [xfs]
xfs_iwalk_ag_recs+0xdf/0x150 [xfs]
xfs_iwalk_run_callbacks+0xb9/0x190 [xfs]
xfs_iwalk_ag+0x1dc/0x2f0 [xfs]
xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs]
xfs_iwalk+0xa4/0xd0 [xfs]
xfs_bulkstat+0xfa/0x170 [xfs]
xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs]
xfs_file_ioctl+0xbf2/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014
==================================================================
On further analysis, I realized that the second parameter to min() is
not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data
buffer. if_bytes can be smaller than the data fork size because:
(a) the forkoff code tries to keep the data area as large as possible
(b) for symbolic links, if_bytes is the ondisk file size + 1
(c) forkoff is always a multiple of 8.
Case in point: for a single-byte symlink target, forkoff will be
8 but the buffer will only be 2 bytes long.
In other words, the logic here is wrong and we walk off the end of the
incore buffer. Fix that.
Cc: stable@vger.kernel.org # v6.10
Fixes: 2651923d8d ("xfs: online repair of symbolic links")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add myself as the maintainer of the Anlogic DR1V90 SoC tree, including
the corresponding DTS and DT bindings paths for Anlogic RISC-V-based
SoCs. I don't really want to look after this platform, but am due to
irritation of the vendor's behaviour towards the contributor of support.
Hence, Odd Fixes as the status.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Currently cpu-clock event always returns 0 count, e.g.,
perf stat -e cpu-clock -- sleep 1
Performance counter stats for 'sleep 1':
0 cpu-clock # 0.000 CPUs utilized
1.002308394 seconds time elapsed
The root cause is the commit 'bc4394e5e7 ("perf: Fix the throttle
error of some clock events")' adds PERF_EF_UPDATE flag check before
calling cpu_clock_event_update() to update the count, however the
PERF_EF_UPDATE flag is never set when the cpu-clock event is stopped in
counting mode (pmu->dev() -> cpu_clock_event_del() ->
cpu_clock_event_stop()). This leads to the cpu-clock event count is
never updated.
To fix this issue, force to set PERF_EF_UPDATE flag for cpu-clock event
just like what task-clock does.
Fixes: bc4394e5e7 ("perf: Fix the throttle error of some clock events")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://patch.msgid.link/20251112080526.3971392-1-dapeng1.mi@linux.intel.com
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
For more details see the Link tag below.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Switch to using system_dfl_wq because system_unbound_wq is going away as part of
a workqueue restructuring.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Link: https://patch.msgid.link/20251113162032.394804-4-marco.crivellari@suse.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
For more details see the Link tag below.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Link: https://patch.msgid.link/20251113162032.394804-3-marco.crivellari@suse.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
For more details see the Link tag below.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://patch.msgid.link/20251113160825.383883-1-marco.crivellari@suse.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
For more details see the Link tag below.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Link: https://patch.msgid.link/20251113160035.376524-1-marco.crivellari@suse.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add IEEE80211_6GHZ_CTRL_REG_AP_ROLE_NOT_RELEVANT
and map it to IEEE80211_REG_LPI_AP for safe regulatory compliance
when AP role classification is not applicable.
Use LPI as safe fallback to prevent power limit violations.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251112110828.856283677cc7.I36138a34847c3b4e680974bf347dde844448f3bc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:
Problem statement: GPIOs are implemented as a strictly exclusive
resource in the kernel but there are lots of platforms on which single
pin is shared by multiple devices which don't communicate so need some
way of properly sharing access to a GPIO. What we have now is the
GPIOD_FLAGS_BIT_NONEXCLUSIVE flag which was introduced as a hack and
doesn't do any locking or arbitration of access - it literally just hand
the same GPIO descriptor to all interested users.
The proposed solution is composed of three major parts: the high-level,
shared GPIO proxy driver that arbitrates access to the shared pin and
exposes a regular GPIO chip interface to consumers, a low-level shared
GPIOLIB module that scans firmware nodes and creates auxiliary devices
that attach to the proxy driver and finally a set of core GPIOLIB
changes that plug the former into the GPIO lookup path.
The changes are implemented in a way that allows to seamlessly compile
out any code related to sharing GPIOs for systems that don't need it.
The practical use-case for this are the powerdown GPIOs shared by
speakers on Qualcomm db845c platform, however I have also extensively
tested it using gpio-virtuser on arm64 qemu with various DT
configurations.
Add the smb3_read_* tracepoints to SMB1's cifs_async_readv() and
cifs_readv_callback().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Add proper cleanup of ctx->source and fc->source to the
cifs_parse_mount_err error handler. This ensures that memory allocated
for the source strings is correctly freed on all error paths, matching
the cleanup already performed in the success path by
smb3_cleanup_fs_context_contents().
Pointers are also set to NULL after freeing to prevent potential
double-free issues.
This change fixes a memory leak originally detected by syzbot. The
leak occurred when processing Opt_source mount options if an error
happened after ctx->source and fc->source were successfully
allocated but before the function completed.
The specific leak sequence was:
1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory
2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory
3. A subsequent error jumps to cifs_parse_mount_err
4. The old error handler freed passwords but not the source strings,
causing the memory to leak.
This issue was not addressed by commit e8c73eb7db ("cifs: client:
fix memory leak in smb3_fs_context_parse_param"), which only fixed
leaks from repeated fsconfig() calls but not this error path.
Patch updated with minor change suggested by kernel test robot
Reported-by: syzbot+87be6809ed9bf6d718e3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=87be6809ed9bf6d718e3
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace close_cached_dir() calls under cfid_list_lock with a new
close_cached_dir_locked() variant that uses kref_put() instead of
kref_put_lock() to avoid recursive locking when dropping references.
While the existing code works if the refcount >= 2 invariant holds,
this area has proven error-prone. Make deadlocks impossible and WARN
on invariant violations.
Cc: stable@vger.kernel.org
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Enable SPK Mute Led and Mic Mute Led for HP platform.
It was also integrated with Tas2781 supported.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
